@things-factory/figure-service 10.1.70 → 10.1.71

package/recipes/column-row/recipe.json

@@ -0,0 +1,103 @@
+{
+  "name": "column-row",
+  "title": {
+    "ko": "기둥 줄",
+    "en": "column row"
+  },
+  "description": {
+    "ko": "고른 부품(바닥) 윗면의 앞쪽 가장자리를 따라 건물 기둥을 간격마다 세웁니다.",
+    "en": "Building columns at every pitch along the front edge of the chosen part's top (a floor)."
+  },
+  "category": "space",
+  "tags": [
+    "column",
+    "pillar",
+    "building"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "pitch",
+      "kind": "mm",
+      "default": 6000,
+      "label": {
+        "ko": "기둥 간격 (mm)",
+        "en": "column pitch (mm)"
+      },
+      "hint": {
+        "ko": "기둥 사이 거리",
+        "en": "the distance between columns"
+      },
+      "min": 2000,
+      "max": 20000
+    },
+    {
+      "name": "height",
+      "kind": "mm",
+      "default": 4000,
+      "label": {
+        "ko": "기둥 높이 (mm)",
+        "en": "column height (mm)"
+      },
+      "hint": {
+        "ko": "바닥에서 기둥 위까지",
+        "en": "from the floor to the column's top"
+      },
+      "min": 2000,
+      "max": 15000
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-column",
+        "kind": "box",
+        "dimensions": {
+          "width": 400,
+          "height": {
+            "param": "height"
+          },
+          "depth": 400
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-column",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-column",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "max"
+          }
+        },
+        "repeat": {
+          "axis": "X",
+          "pitch": {
+            "param": "pitch"
+          }
+        }
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-column",
+      "material": {
+        "token": "palette.tpl-b8bfc6"
+      },
+      "palette": {
+        "palette.tpl-b8bfc6": "#b8bfc6"
+      }
+    }
+  ]
+}

package/recipes/column-row/spec.json

@@ -0,0 +1,71 @@
+{
+  "name": "column-row",
+  "category": "space",
+  "tags": [
+    "column",
+    "pillar",
+    "building"
+  ],
+  "title": {
+    "ko": "기둥 줄",
+    "en": "column row"
+  },
+  "description": {
+    "ko": "고른 부품(바닥) 윗면의 앞쪽 가장자리를 따라 건물 기둥을 간격마다 세웁니다.",
+    "en": "Building columns at every pitch along the front edge of the chosen part's top (a floor)."
+  },
+  "params": [
+    {
+      "name": "pitch",
+      "kind": "mm",
+      "default": 6000,
+      "label": {
+        "ko": "기둥 간격 (mm)",
+        "en": "column pitch (mm)"
+      },
+      "hint": {
+        "ko": "기둥 사이 거리",
+        "en": "the distance between columns"
+      },
+      "min": 2000,
+      "max": 20000,
+      "bind": [
+        {
+          "step": {
+            "kind": "set-joint",
+            "joint": {
+              "id": "{id}-column"
+            }
+          },
+          "path": "joint.repeat.pitch"
+        }
+      ]
+    },
+    {
+      "name": "height",
+      "kind": "mm",
+      "default": 4000,
+      "label": {
+        "ko": "기둥 높이 (mm)",
+        "en": "column height (mm)"
+      },
+      "hint": {
+        "ko": "바닥에서 기둥 위까지",
+        "en": "from the floor to the column's top"
+      },
+      "min": 2000,
+      "max": 15000,
+      "bind": [
+        {
+          "step": {
+            "kind": "add-part",
+            "part": {
+              "id": "{id}-column"
+            }
+          },
+          "path": "part.dimensions.height"
+        }
+      ]
+    }
+  ]
+}

package/recipes/control-cabinet/build.mts

@@ -0,0 +1,14 @@
+/* 제어함 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 1600, y: 1400, z: 1000 }, 'TPL_CONTROL_CABINET'))
+  m.box('cabinet', 300, 1200, 800)
+    .on('cabinet', 'left', 'host', 'right', { y: 'min' })
+    .colour('cabinet', 'palette.cabinet', '#8795a3')
+    .box('door', 20, 1180, 780)
+    .on('door', 'left', 'cabinet', 'right', { z: 'max' })
+    .colour('door', 'palette.leaf', '#5c7c96')
+    .moves('door', { type: 'revolute', axis: 'Y', lower: 0, upper: 100, state: 'open' })
+  return m.asset
+}

package/recipes/control-cabinet/facts.md

@@ -0,0 +1,3 @@
+# control-cabinet — facts (not shown on screen; the guide's basis and our review)
+
+오른쪽 면, y 최소. 함 300×1200×800, 문 20×1180×780(앞 가장자리 경첩), 회전 0~100°.

package/recipes/control-cabinet/guide.en.md

@@ -0,0 +1,17 @@
+## When to use it
+
+For a control cabinet on a machine's side.
+
+## Putting it in
+
+1. Choose the body; the cabinet goes on its **right** side.
+2. Press "put in".
+
+## Afterwards
+
+- The **open** control swings the door up to 100°.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- The cabinet does not follow the body's size.

package/recipes/control-cabinet/guide.ko.md

@@ -0,0 +1,17 @@
+## 언제 쓰나
+
+설비 옆에 제어함을 붙일 때 씁니다.
+
+## 넣는 순서
+
+1. 설비 몸체를 고릅니다. 제어함은 **오른쪽 면**에 붙습니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- **열림** 조작값으로 문이 100°까지 열립니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 제어함 크기는 몸체를 따르지 않습니다.

package/recipes/control-cabinet/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_CONTROL_CABINET","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"cabinet.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"cabinet.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"cabinet.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"door.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"door.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"door.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"open","unit":"deg","min":0,"max":100,"role":"state"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"axis.ratio.0","unit":"ratio","value":0},{"id":"axis.ratio.1","unit":"ratio","value":1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"cabinet.shape","op":"box-shape@1","args":["cabinet.dimension.width","cabinet.dimension.height","cabinet.dimension.depth"],"outputs":{"shape":"cabinet.shapeValue"},"params":{"frame":"cabinet.local"}},{"id":"cabinet.pose","op":"rigid@1","args":["cabinet.on.host.along.x.1.sum.value","cabinet.on.host.own-edge.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"cabinet.poseValue"},"params":{"from":"cabinet.local","to":"cabinet.seat"}},{"id":"cabinet","op":"place@1","args":["cabinet.shapeValue","cabinet.world.value"],"outputs":{"placed":"cabinet.placed"}},{"id":"door.shape","op":"box-shape@1","args":["door.dimension.width","door.dimension.height","door.dimension.depth"],"outputs":{"shape":"door.shapeValue"},"params":{"frame":"door.local"}},{"id":"door.pose","op":"rigid@1","args":["door.on.cabinet.along.x.1.sum.value","d.mm.0","door.on.cabinet.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"door.poseValue"},"params":{"from":"door.local","to":"door.seat"}},{"id":"door","op":"place@1","args":["door.shapeValue","door.world.value"],"outputs":{"placed":"door.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"cabinet.on.host.seat.x.0.times","op":"mul@1","args":["host.size.x","k.ratio.0_5"],"outputs":{"value":"cabinet.on.host.seat.x.0.times.value"}},{"id":"cabinet.on.host.along.x.0.times","op":"mul@1","args":["cabinet.dimension.width","k.ratio.0_5"],"outputs":{"value":"cabinet.on.host.along.x.0.times.value"}},{"id":"cabinet.on.host.along.x.1.sum","op":"add@1","args":["cabinet.on.host.along.x.0.times.value","d.mm.0"],"outputs":{"value":"cabinet.on.host.along.x.1.sum.value"}},{"id":"cabinet.on.host.edge.y.0.times","op":"mul@1","args":["host.size.y","k.ratio._0_5"],"outputs":{"value":"cabinet.on.host.edge.y.0.times.value"}},{"id":"cabinet.on.host.own-edge.y.0.times","op":"mul@1","args":["cabinet.dimension.height","k.ratio.0_5"],"outputs":{"value":"cabinet.on.host.own-edge.y.0.times.value"}},{"id":"cabinet.seat.rigid","op":"rigid@1","args":["cabinet.on.host.seat.x.0.times.value","cabinet.on.host.edge.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"cabinet.seat.value"},"params":{"from":"cabinet.seat","to":"host.local"}},{"id":"cabinet.chain","op":"compose@1","args":["cabinet.seat.value","cabinet.poseValue"],"outputs":{"pose":"cabinet.chain.value"}},{"id":"cabinet.world","op":"compose@1","args":["host.chain.value","cabinet.chain.value"],"outputs":{"pose":"cabinet.world.value"}},{"id":"door.on.cabinet.seat.x.0.times","op":"mul@1","args":["cabinet.dimension.width","k.ratio.0_5"],"outputs":{"value":"door.on.cabinet.seat.x.0.times.value"}},{"id":"door.on.cabinet.along.x.0.times","op":"mul@1","args":["door.dimension.width","k.ratio.0_5"],"outputs":{"value":"door.on.cabinet.along.x.0.times.value"}},{"id":"door.on.cabinet.along.x.1.sum","op":"add@1","args":["door.on.cabinet.along.x.0.times.value","d.mm.0"],"outputs":{"value":"door.on.cabinet.along.x.1.sum.value"}},{"id":"door.on.cabinet.edge.z.0.times","op":"mul@1","args":["cabinet.dimension.depth","k.ratio.0_5"],"outputs":{"value":"door.on.cabinet.edge.z.0.times.value"}},{"id":"door.on.cabinet.own-edge.z.0.times","op":"mul@1","args":["door.dimension.depth","k.ratio._0_5"],"outputs":{"value":"door.on.cabinet.own-edge.z.0.times.value"}},{"id":"door.seat.rigid","op":"rigid@1","args":["door.on.cabinet.seat.x.0.times.value","d.mm.0","door.on.cabinet.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"door.seat.value"},"params":{"from":"door.joint","to":"cabinet.local"}},{"id":"door.chain","op":"compose@1","args":["door.seat.value","door.turned.value"],"outputs":{"pose":"door.chain.value"}},{"id":"door.world","op":"compose@1","args":["cabinet.world.value","door.chain.value"],"outputs":{"pose":"door.world.value"}},{"id":"door.motion","op":"axis-turn@1","args":["axis.ratio.0","axis.ratio.1","axis.ratio.0","open"],"outputs":{"pose":"door.motion.value"},"params":{"from":"door.seat","to":"door.joint"}},{"id":"door.turned","op":"compose@1","args":["door.motion.value","door.poseValue"],"outputs":{"pose":"door.turned.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":1600,"host.size.y":1400,"host.size.z":1000,"cabinet.dimension.width":300,"cabinet.dimension.height":1200,"cabinet.dimension.depth":800,"door.dimension.width":20,"door.dimension.height":1180,"door.dimension.depth":780},"stateDefaults":{"open":0},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-8795a3":"#8795a3","palette.tpl-5c7c96":"#5c7c96"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"cabinet","material":{"token":"palette.tpl-8795a3"}},{"target":"door","material":{"token":"palette.tpl-5c7c96"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"cabinet","type":"fixed","body0":{"part":"host","face":"right"},"body1":{"part":"cabinet","face":"left"},"origin":{"align":{"y":"min"}}},{"id":"door","type":"revolute","body0":{"part":"cabinet","face":"right"},"body1":{"part":"door","face":"left"},"origin":{"align":{"z":"max"}},"axis":"Y","lowerLimit":0,"upperLimit":100,"state":{"id":"open"}}]}

package/recipes/control-cabinet/recipe.json

@@ -0,0 +1,111 @@
+{
+  "name": "control-cabinet",
+  "title": {
+    "ko": "제어함",
+    "en": "control cabinet"
+  },
+  "description": {
+    "ko": "고른 부품의 오른쪽 면에 여닫이 문이 달린 제어함을 붙입니다.",
+    "en": "A control cabinet with a hinged door on the chosen part's right side."
+  },
+  "category": "control",
+  "tags": [
+    "cabinet",
+    "control",
+    "electrical"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-cabinet",
+        "kind": "box",
+        "dimensions": {
+          "width": 300,
+          "height": 1200,
+          "depth": 800
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-door",
+        "kind": "box",
+        "dimensions": {
+          "width": 20,
+          "height": 1180,
+          "depth": 780
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-cabinet",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "right"
+        },
+        "body1": {
+          "part": "{id}-cabinet",
+          "face": "left"
+        },
+        "origin": {
+          "align": {
+            "y": "min"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-door",
+        "type": "revolute",
+        "body0": {
+          "part": "{id}-cabinet",
+          "face": "right"
+        },
+        "body1": {
+          "part": "{id}-door",
+          "face": "left"
+        },
+        "origin": {
+          "align": {
+            "z": "max"
+          }
+        },
+        "axis": "Y",
+        "lowerLimit": 0,
+        "upperLimit": 100,
+        "state": {
+          "id": "{id}-open"
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-cabinet",
+      "material": {
+        "token": "palette.tpl-8795a3"
+      },
+      "palette": {
+        "palette.tpl-8795a3": "#8795a3"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-door",
+      "material": {
+        "token": "palette.tpl-5c7c96"
+      },
+      "palette": {
+        "palette.tpl-5c7c96": "#5c7c96"
+      }
+    }
+  ]
+}

package/recipes/control-cabinet/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "control-cabinet",
+  "category": "control",
+  "tags": [
+    "cabinet",
+    "control",
+    "electrical"
+  ],
+  "title": {
+    "ko": "제어함",
+    "en": "control cabinet"
+  },
+  "description": {
+    "ko": "고른 부품의 오른쪽 면에 여닫이 문이 달린 제어함을 붙입니다.",
+    "en": "A control cabinet with a hinged door on the chosen part's right side."
+  },
+  "params": []
+}

package/recipes/conveyor-skirts/build.mts

@@ -0,0 +1,9 @@
+/* 컨베이어 스커트 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 3000, y: 700, z: 800 }, 'TPL_CONVEYOR_SKIRTS'))
+  for (const [s, face, onto] of [['skirt-front', 'back', 'front'], ['skirt-back', 'front', 'back']] as const)
+    m.box(s, 3000, 700, 10).follow(s, 'x', 'host', 'x').follow(s, 'y', 'host', 'y').on(s, face, 'host', onto).colour(s, 'panel', '#4f5d6b')
+  return m.asset
+}

package/recipes/conveyor-skirts/facts.md

@@ -0,0 +1,3 @@
+# conveyor-skirts — facts (not shown on screen; the guide's basis and our review)
+
+앞 · 뒷면. 판 X = 몸체 X, Y = 몸체 Y, 두께 10.

package/recipes/conveyor-skirts/guide.en.md

@@ -0,0 +1,16 @@
+## When to use it
+
+To cover a conveyor's sides with panels and hide the frame inside.
+
+## Putting it in
+
+1. Choose the conveyor body; the panels go on its **front and back**.
+2. Press "put in".
+
+## Afterwards
+
+- The panels follow the body's length and height; stretch the body and they stretch.
+
+## Good to know
+
+- The panels are 10 mm thick.

package/recipes/conveyor-skirts/guide.ko.md

@@ -0,0 +1,16 @@
+## 언제 쓰나
+
+컨베이어 옆면을 판으로 덮어 안쪽 구조를 가릴 때 씁니다.
+
+## 넣는 순서
+
+1. 컨베이어 몸체를 고릅니다. 판은 **앞면과 뒷면**에 붙습니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 판은 몸체 길이와 높이를 따릅니다. 몸체를 늘이면 판도 늘어납니다.
+
+## 알아 둘 것
+
+- 판 두께는 10 mm입니다.

package/recipes/conveyor-skirts/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_CONVEYOR_SKIRTS","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"skirt-front.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"skirt-back.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio.1","unit":"ratio","value":1},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"k.ratio._1","unit":"ratio","value":-1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.dimension.x.value","host.dimension.y.value","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"skirt-front.shape","op":"box-shape@1","args":["skirt-front.dimension.x.value","skirt-front.dimension.y.value","skirt-front.dimension.depth"],"outputs":{"shape":"skirt-front.shapeValue"},"params":{"frame":"skirt-front.local"}},{"id":"skirt-front.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","skirt-front.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"skirt-front.poseValue"},"params":{"from":"skirt-front.local","to":"skirt-front.seat"}},{"id":"skirt-front","op":"place@1","args":["skirt-front.shapeValue","skirt-front.world.value"],"outputs":{"placed":"skirt-front.placed"}},{"id":"skirt-front.dimension.x","op":"mul@1","args":["host.dimension.x.value","k.ratio.1"],"outputs":{"value":"skirt-front.dimension.x.value"}},{"id":"host.dimension.x","op":"mul@1","args":["host.size.x","k.ratio.1"],"outputs":{"value":"host.dimension.x.value"}},{"id":"skirt-front.dimension.y","op":"mul@1","args":["host.dimension.y.value","k.ratio.1"],"outputs":{"value":"skirt-front.dimension.y.value"}},{"id":"host.dimension.y","op":"mul@1","args":["host.size.y","k.ratio.1"],"outputs":{"value":"host.dimension.y.value"}},{"id":"skirt-back.shape","op":"box-shape@1","args":["skirt-back.dimension.x.value","skirt-back.dimension.y.value","skirt-back.dimension.depth"],"outputs":{"shape":"skirt-back.shapeValue"},"params":{"frame":"skirt-back.local"}},{"id":"skirt-back.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","skirt-back.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"skirt-back.poseValue"},"params":{"from":"skirt-back.local","to":"skirt-back.seat"}},{"id":"skirt-back","op":"place@1","args":["skirt-back.shapeValue","skirt-back.world.value"],"outputs":{"placed":"skirt-back.placed"}},{"id":"skirt-back.dimension.x","op":"mul@1","args":["host.dimension.x.value","k.ratio.1"],"outputs":{"value":"skirt-back.dimension.x.value"}},{"id":"skirt-back.dimension.y","op":"mul@1","args":["host.dimension.y.value","k.ratio.1"],"outputs":{"value":"skirt-back.dimension.y.value"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.dimension.y.value","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"skirt-front.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"skirt-front.on.host.seat.z.0.times.value"}},{"id":"skirt-front.on.host.along.z.0.times","op":"mul@1","args":["skirt-front.dimension.depth","k.ratio.0_5"],"outputs":{"value":"skirt-front.on.host.along.z.0.times.value"}},{"id":"skirt-front.on.host.along.z.1.sum","op":"add@1","args":["skirt-front.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"skirt-front.on.host.along.z.1.sum.value"}},{"id":"skirt-front.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","skirt-front.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"skirt-front.seat.value"},"params":{"from":"skirt-front.seat","to":"host.local"}},{"id":"skirt-front.chain","op":"compose@1","args":["skirt-front.seat.value","skirt-front.poseValue"],"outputs":{"pose":"skirt-front.chain.value"}},{"id":"skirt-front.world","op":"compose@1","args":["host.chain.value","skirt-front.chain.value"],"outputs":{"pose":"skirt-front.world.value"}},{"id":"skirt-back.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio._0_5"],"outputs":{"value":"skirt-back.on.host.seat.z.0.times.value"}},{"id":"skirt-back.on.host.along.z.0.times","op":"mul@1","args":["skirt-back.dimension.depth","k.ratio._0_5"],"outputs":{"value":"skirt-back.on.host.along.z.0.times.value"}},{"id":"skirt-back.on.host.along.z.1.times","op":"mul@1","args":["d.mm.0","k.ratio._1"],"outputs":{"value":"skirt-back.on.host.along.z.1.times.value"}},{"id":"skirt-back.on.host.along.z.1.sum","op":"add@1","args":["skirt-back.on.host.along.z.0.times.value","skirt-back.on.host.along.z.1.times.value"],"outputs":{"value":"skirt-back.on.host.along.z.1.sum.value"}},{"id":"skirt-back.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","skirt-back.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"skirt-back.seat.value"},"params":{"from":"skirt-back.seat","to":"host.local"}},{"id":"skirt-back.chain","op":"compose@1","args":["skirt-back.seat.value","skirt-back.poseValue"],"outputs":{"pose":"skirt-back.chain.value"}},{"id":"skirt-back.world","op":"compose@1","args":["host.chain.value","skirt-back.chain.value"],"outputs":{"pose":"skirt-back.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":3000,"host.size.y":700,"host.size.z":800,"skirt-front.dimension.depth":10,"skirt-back.dimension.depth":10},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-4f5d6b":"#4f5d6b"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"skirt-front","material":{"token":"palette.tpl-4f5d6b"}},{"target":"skirt-back","material":{"token":"palette.tpl-4f5d6b"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"skirt-front","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"skirt-front","face":"back"},"origin":{}},{"id":"skirt-back","type":"fixed","body0":{"part":"host","face":"back"},"body1":{"part":"skirt-back","face":"front"},"origin":{}}]}

package/recipes/conveyor-skirts/recipe.json

@@ -0,0 +1,141 @@
+{
+  "name": "conveyor-skirts",
+  "title": {
+    "ko": "컨베이어 스커트",
+    "en": "conveyor skirts"
+  },
+  "description": {
+    "ko": "고른 부품(컨베이어 몸체)의 앞뒤 옆면에 덮개 판을 붙입니다. 판은 몸체 길이와 높이를 따릅니다.",
+    "en": "Side plates on the front and back of the chosen part (a conveyor body), following its length and height."
+  },
+  "category": "conveyor",
+  "tags": [
+    "skirt",
+    "side",
+    "conveyor"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-skirt-front",
+        "kind": "box",
+        "dimensions": {
+          "width": 3000,
+          "height": 700,
+          "depth": 10
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-skirt-back",
+        "kind": "box",
+        "dimensions": {
+          "width": 3000,
+          "height": 700,
+          "depth": 10
+        }
+      }
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-skirt-front",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-skirt-front",
+      "axis": "y",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "y"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-skirt-back",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-skirt-back",
+      "axis": "y",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "y"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-skirt-front",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-skirt-front",
+          "face": "back"
+        },
+        "origin": {}
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-skirt-back",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "back"
+        },
+        "body1": {
+          "part": "{id}-skirt-back",
+          "face": "front"
+        },
+        "origin": {}
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-skirt-front",
+      "material": {
+        "token": "palette.tpl-4f5d6b"
+      },
+      "palette": {
+        "palette.tpl-4f5d6b": "#4f5d6b"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-skirt-back",
+      "material": {
+        "token": "palette.tpl-4f5d6b"
+      },
+      "palette": {
+        "palette.tpl-4f5d6b": "#4f5d6b"
+      }
+    }
+  ]
+}

package/recipes/conveyor-skirts/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "conveyor-skirts",
+  "category": "conveyor",
+  "tags": [
+    "skirt",
+    "side",
+    "conveyor"
+  ],
+  "title": {
+    "ko": "컨베이어 스커트",
+    "en": "conveyor skirts"
+  },
+  "description": {
+    "ko": "고른 부품(컨베이어 몸체)의 앞뒤 옆면에 덮개 판을 붙입니다. 판은 몸체 길이와 높이를 따릅니다.",
+    "en": "Side plates on the front and back of the chosen part (a conveyor body), following its length and height."
+  },
+  "params": []
+}

package/recipes/counter-display/build.mts

@@ -0,0 +1,13 @@
+/* 숫자 표시기 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 1600, y: 1400, z: 1000 }, 'TPL_COUNTER_DISPLAY'))
+  m.box('display', 600, 200, 60)
+    .on('display', 'back', 'host', 'front', { y: 'max' })
+    .colour('display', 'screen', '#1b1f23')
+    .box('digits', 540, 140, 5)
+    .on('digits', 'back', 'display', 'front')
+    .colour('digits', 'digits', '#e74c3c', true)
+  return m.asset
+}

package/recipes/counter-display/facts.md

@@ -0,0 +1,3 @@
+# counter-display — facts (not shown on screen; the guide's basis and our review)
+
+앞면 y 최대. 틀 600×200×60, 표시 면 540×140×5(빛남).