@serfab/cadre-core 0.10.0 → 0.12.0

package/src/control-stream.ts

@@ -1,205 +1,205 @@
-/**
- * Shared control-network stream primitives.
- *
- * The cadre control protocols — seed delivery (`seed-bootstrap.ts`), push-wake
- * (`strand-wake-protocol.ts`), and strand formation (`strand-formation-protocol.ts`)
- * — all speak 4-byte big-endian length-prefixed JSON frames over a libp2p 3.x
- * stream. This module lifts the previously-triplicated stream shape, frame
- * writer, and `withTimeout` wrapper into one place, and adds a timeout-bounded,
- * abort-on-timeout read-to-EOF helper so a misbehaving peer that opens a stream
- * and never half-closes its write end cannot pin a receiver forever.
- *
- * The sender side of all three protocols is the same exchange — dial under a
- * deadline, write one frame, half-close, read one response, reset the stream on
- * any failure — so that shape lives here too, as {@link withDeadline} +
- * {@link exchangeFrame}; each protocol supplies only its dial options, its
- * request object, and its response decoder.
- *
- * Dependency-free by design: it imports nothing from the protocol modules, so
- * the import graph stays acyclic (`control-stream` ← `seed-bootstrap` ←
- * `strand-wake-protocol`). In particular it returns RAW bytes from
- * {@link readStreamToEnd} rather than decoding a frame — callers own the
- * `decodeLengthPrefixedFrame` guard.
- */
-
-/**
- * Minimal libp2p 3.x stream surface: AsyncIterable for reads, `send()` for
- * writes, `close()` to half-close the write end (EOF), `abort()` to reset.
- */
-export interface ControlStream extends AsyncIterable<Uint8Array> {
-  send(data: Uint8Array): boolean;
-  close(): Promise<void>;
-  abort(err: Error): void;
-}
-
-/** Write a JSON object as a single 4-byte big-endian length-prefixed frame. */
-export function writeFrame(stream: ControlStream, obj: unknown): void {
-  const body = new TextEncoder().encode(JSON.stringify(obj));
-  const prefix = new Uint8Array(4);
-  new DataView(prefix.buffer).setUint32(0, body.length, false);
-  stream.send(prefix);
-  stream.send(body);
-}
-
-/**
- * Reject if `op` does not settle within `ms`. On timeout, invoke `onTimeout`
- * before rejecting — a hook for releasing whatever the op is parked on. A
- * throwing `onTimeout` is swallowed so it cannot mask the timeout rejection. The
- * rejection message is exactly `<label> timed out after <ms>ms`, so callers fold
- * any domain prefix into `label`.
- *
- * Senders want {@link withDeadline}, which wires `onTimeout` to an
- * `AbortController` so the in-flight dial/stream is cancelled rather than leaked.
- */
-export function withTimeout<T>(
-  ms: number,
-  label: string,
-  op: () => Promise<T>,
-  onTimeout?: () => void,
-): Promise<T> {
-  return new Promise<T>((resolve, reject) => {
-    const timer = setTimeout(() => {
-      try {
-        onTimeout?.();
-      } catch {
-        // Best-effort: a throwing onTimeout must not replace the timeout error.
-      }
-      reject(new Error(`${label} timed out after ${ms}ms`));
-    }, ms);
-    op().then(resolve, reject).finally(() => clearTimeout(timer));
-  });
-}
-
-/**
- * Run `op` under a `withTimeout` deadline that also *cancels* it: the signal
- * handed to `op` is aborted immediately before the timeout rejection, so a
- * sender can pass it to `dialProtocol` (cancelling an in-flight connect) and to
- * {@link exchangeFrame} (resetting a live stream) instead of leaking either.
- */
-export function withDeadline<T>(
-  ms: number,
-  label: string,
-  op: (signal: AbortSignal) => Promise<T>,
-): Promise<T> {
-  const controller = new AbortController();
-  return withTimeout(ms, label, () => op(controller.signal), () => controller.abort());
-}
-
-/**
- * Send one request frame on an open stream, half-close the write end, and read
- * the response through `readResponse`.
- *
- * `signal` is the caller's deadline (see {@link withDeadline}): an abort resets
- * the stream, releasing the otherwise unbounded response read. If the deadline
- * already fired while the stream was being dialed, the freshly-opened stream is
- * reset here rather than left dangling. Every reset — deadline, response-decode
- * failure, or a `readResponse` that rejects without aborting (the size-cap path
- * of {@link readStreamToEnd}) — goes through one idempotent `abort`, so the
- * deadline listener and the error path cannot double-reset a stream.
- *
- * `readResponse` owns its own read bound, which is a backstop rather than the
- * primary one: the caller's deadline started first and therefore fires first.
- * It matters only when an abort does not release the read (e.g. a stream double
- * whose `abort()` is a no-op).
- */
-export async function exchangeFrame<T>(
-  stream: ControlStream,
-  signal: AbortSignal,
-  request: unknown,
-  readResponse: (stream: ControlStream) => Promise<T>,
-  abortMessage: string,
-): Promise<T> {
-  let reset = false;
-  const resetStream = (err: Error): void => {
-    if (reset) return;
-    reset = true;
-    stream.abort(err);
-  };
-
-  const abortErr = new Error(abortMessage);
-  const onAbort = (): void => resetStream(abortErr);
-  if (signal.aborted) {
-    onAbort();
-    throw abortErr;
-  }
-  signal.addEventListener('abort', onAbort, { once: true });
-
-  try {
-    writeFrame(stream, request);
-    // close() half-closes the write end (EOF) while the read end stays open for
-    // the response — the libp2p 3.x request/response pattern.
-    await stream.close();
-    return await readResponse(stream);
-  } catch (err) {
-    resetStream(err instanceof Error ? err : new Error(String(err)));
-    throw err;
-  } finally {
-    signal.removeEventListener('abort', onAbort);
-  }
-}
-
-/** Normalize a libp2p chunk (Uint8Array or Uint8ArrayList) to a flat Uint8Array. */
-function toBytes(chunk: Uint8Array | { subarray(): Uint8Array }): Uint8Array {
-  return chunk instanceof Uint8Array ? chunk : chunk.subarray();
-}
-
-/**
- * Read a stream to EOF, capped at `maxBytes`, bounded by `timeoutMs`, returning
- * the assembled bytes (the caller decodes via `decodeLengthPrefixedFrame`).
- *
- * Implemented as `Promise.race([readLoop, timeout])`:
- * - The size cap throws synchronously inside `readLoop` (a well-behaved peer may
- *   have sent a real-but-too-large frame and could still be reading for the ack,
- *   so this path does NOT abort the stream — it just rejects).
- * - The timeout path is the true hang: it ALSO calls `stream.abort(err)` to
- *   release the stuck read. The race guarantees the helper settles at the
- *   deadline even if `abort()` does not immediately unblock the iterator (e.g. a
- *   test double whose `abort()` is a no-op).
- */
-export function readStreamToEnd(
-  stream: ControlStream,
-  opts: { maxBytes: number; timeoutMs: number; label: string },
-): Promise<Uint8Array> {
-  const { maxBytes, timeoutMs, label } = opts;
-  let timer: ReturnType<typeof setTimeout> | undefined;
-
-  const timeout = new Promise<never>((_resolve, reject) => {
-    timer = setTimeout(() => {
-      const err = new Error(`${label} read timed out after ${timeoutMs}ms`);
-      // Release the hung read; the race below settles on `err` regardless of
-      // whether abort() promptly unblocks the iterator.
-      try {
-        stream.abort(err);
-      } catch {
-        // Best-effort: a broken/closed stream may reject abort.
-      }
-      reject(err);
-    }, timeoutMs);
-  });
-
-  const readLoop = collect(stream, maxBytes, label);
-
-  return Promise.race([readLoop, timeout]).finally(() => clearTimeout(timer));
-}
-
-/** Accumulate every chunk to EOF, rejecting once the running total exceeds `maxBytes`. */
-async function collect(stream: ControlStream, maxBytes: number, label: string): Promise<Uint8Array> {
-  const chunks: Uint8Array[] = [];
-  let total = 0;
-  for await (const chunk of stream) {
-    const bytes = toBytes(chunk);
-    chunks.push(bytes);
-    total += bytes.length;
-    if (total > maxBytes) {
-      throw new Error(`${label} message too large: ${total} bytes exceeds max ${maxBytes}`);
-    }
-  }
-
-  const data = new Uint8Array(total);
-  let offset = 0;
-  for (const chunk of chunks) {
-    data.set(chunk, offset);
-    offset += chunk.length;
-  }
-  return data;
-}
+/**
+ * Shared control-network stream primitives.
+ *
+ * The cadre control protocols — seed delivery (`seed-bootstrap.ts`), push-wake
+ * (`strand-wake-protocol.ts`), and strand formation (`strand-formation-protocol.ts`)
+ * — all speak 4-byte big-endian length-prefixed JSON frames over a libp2p 3.x
+ * stream. This module lifts the previously-triplicated stream shape, frame
+ * writer, and `withTimeout` wrapper into one place, and adds a timeout-bounded,
+ * abort-on-timeout read-to-EOF helper so a misbehaving peer that opens a stream
+ * and never half-closes its write end cannot pin a receiver forever.
+ *
+ * The sender side of all three protocols is the same exchange — dial under a
+ * deadline, write one frame, half-close, read one response, reset the stream on
+ * any failure — so that shape lives here too, as {@link withDeadline} +
+ * {@link exchangeFrame}; each protocol supplies only its dial options, its
+ * request object, and its response decoder.
+ *
+ * Dependency-free by design: it imports nothing from the protocol modules, so
+ * the import graph stays acyclic (`control-stream` ← `seed-bootstrap` ←
+ * `strand-wake-protocol`). In particular it returns RAW bytes from
+ * {@link readStreamToEnd} rather than decoding a frame — callers own the
+ * `decodeLengthPrefixedFrame` guard.
+ */
+
+/**
+ * Minimal libp2p 3.x stream surface: AsyncIterable for reads, `send()` for
+ * writes, `close()` to half-close the write end (EOF), `abort()` to reset.
+ */
+export interface ControlStream extends AsyncIterable<Uint8Array> {
+  send(data: Uint8Array): boolean;
+  close(): Promise<void>;
+  abort(err: Error): void;
+}
+
+/** Write a JSON object as a single 4-byte big-endian length-prefixed frame. */
+export function writeFrame(stream: ControlStream, obj: unknown): void {
+  const body = new TextEncoder().encode(JSON.stringify(obj));
+  const prefix = new Uint8Array(4);
+  new DataView(prefix.buffer).setUint32(0, body.length, false);
+  stream.send(prefix);
+  stream.send(body);
+}
+
+/**
+ * Reject if `op` does not settle within `ms`. On timeout, invoke `onTimeout`
+ * before rejecting — a hook for releasing whatever the op is parked on. A
+ * throwing `onTimeout` is swallowed so it cannot mask the timeout rejection. The
+ * rejection message is exactly `<label> timed out after <ms>ms`, so callers fold
+ * any domain prefix into `label`.
+ *
+ * Senders want {@link withDeadline}, which wires `onTimeout` to an
+ * `AbortController` so the in-flight dial/stream is cancelled rather than leaked.
+ */
+export function withTimeout<T>(
+  ms: number,
+  label: string,
+  op: () => Promise<T>,
+  onTimeout?: () => void,
+): Promise<T> {
+  return new Promise<T>((resolve, reject) => {
+    const timer = setTimeout(() => {
+      try {
+        onTimeout?.();
+      } catch {
+        // Best-effort: a throwing onTimeout must not replace the timeout error.
+      }
+      reject(new Error(`${label} timed out after ${ms}ms`));
+    }, ms);
+    op().then(resolve, reject).finally(() => clearTimeout(timer));
+  });
+}
+
+/**
+ * Run `op` under a `withTimeout` deadline that also *cancels* it: the signal
+ * handed to `op` is aborted immediately before the timeout rejection, so a
+ * sender can pass it to `dialProtocol` (cancelling an in-flight connect) and to
+ * {@link exchangeFrame} (resetting a live stream) instead of leaking either.
+ */
+export function withDeadline<T>(
+  ms: number,
+  label: string,
+  op: (signal: AbortSignal) => Promise<T>,
+): Promise<T> {
+  const controller = new AbortController();
+  return withTimeout(ms, label, () => op(controller.signal), () => controller.abort());
+}
+
+/**
+ * Send one request frame on an open stream, half-close the write end, and read
+ * the response through `readResponse`.
+ *
+ * `signal` is the caller's deadline (see {@link withDeadline}): an abort resets
+ * the stream, releasing the otherwise unbounded response read. If the deadline
+ * already fired while the stream was being dialed, the freshly-opened stream is
+ * reset here rather than left dangling. Every reset — deadline, response-decode
+ * failure, or a `readResponse` that rejects without aborting (the size-cap path
+ * of {@link readStreamToEnd}) — goes through one idempotent `abort`, so the
+ * deadline listener and the error path cannot double-reset a stream.
+ *
+ * `readResponse` owns its own read bound, which is a backstop rather than the
+ * primary one: the caller's deadline started first and therefore fires first.
+ * It matters only when an abort does not release the read (e.g. a stream double
+ * whose `abort()` is a no-op).
+ */
+export async function exchangeFrame<T>(
+  stream: ControlStream,
+  signal: AbortSignal,
+  request: unknown,
+  readResponse: (stream: ControlStream) => Promise<T>,
+  abortMessage: string,
+): Promise<T> {
+  let reset = false;
+  const resetStream = (err: Error): void => {
+    if (reset) return;
+    reset = true;
+    stream.abort(err);
+  };
+
+  const abortErr = new Error(abortMessage);
+  const onAbort = (): void => resetStream(abortErr);
+  if (signal.aborted) {
+    onAbort();
+    throw abortErr;
+  }
+  signal.addEventListener('abort', onAbort, { once: true });
+
+  try {
+    writeFrame(stream, request);
+    // close() half-closes the write end (EOF) while the read end stays open for
+    // the response — the libp2p 3.x request/response pattern.
+    await stream.close();
+    return await readResponse(stream);
+  } catch (err) {
+    resetStream(err instanceof Error ? err : new Error(String(err)));
+    throw err;
+  } finally {
+    signal.removeEventListener('abort', onAbort);
+  }
+}
+
+/** Normalize a libp2p chunk (Uint8Array or Uint8ArrayList) to a flat Uint8Array. */
+function toBytes(chunk: Uint8Array | { subarray(): Uint8Array }): Uint8Array {
+  return chunk instanceof Uint8Array ? chunk : chunk.subarray();
+}
+
+/**
+ * Read a stream to EOF, capped at `maxBytes`, bounded by `timeoutMs`, returning
+ * the assembled bytes (the caller decodes via `decodeLengthPrefixedFrame`).
+ *
+ * Implemented as `Promise.race([readLoop, timeout])`:
+ * - The size cap throws synchronously inside `readLoop` (a well-behaved peer may
+ *   have sent a real-but-too-large frame and could still be reading for the ack,
+ *   so this path does NOT abort the stream — it just rejects).
+ * - The timeout path is the true hang: it ALSO calls `stream.abort(err)` to
+ *   release the stuck read. The race guarantees the helper settles at the
+ *   deadline even if `abort()` does not immediately unblock the iterator (e.g. a
+ *   test double whose `abort()` is a no-op).
+ */
+export function readStreamToEnd(
+  stream: ControlStream,
+  opts: { maxBytes: number; timeoutMs: number; label: string },
+): Promise<Uint8Array> {
+  const { maxBytes, timeoutMs, label } = opts;
+  let timer: ReturnType<typeof setTimeout> | undefined;
+
+  const timeout = new Promise<never>((_resolve, reject) => {
+    timer = setTimeout(() => {
+      const err = new Error(`${label} read timed out after ${timeoutMs}ms`);
+      // Release the hung read; the race below settles on `err` regardless of
+      // whether abort() promptly unblocks the iterator.
+      try {
+        stream.abort(err);
+      } catch {
+        // Best-effort: a broken/closed stream may reject abort.
+      }
+      reject(err);
+    }, timeoutMs);
+  });
+
+  const readLoop = collect(stream, maxBytes, label);
+
+  return Promise.race([readLoop, timeout]).finally(() => clearTimeout(timer));
+}
+
+/** Accumulate every chunk to EOF, rejecting once the running total exceeds `maxBytes`. */
+async function collect(stream: ControlStream, maxBytes: number, label: string): Promise<Uint8Array> {
+  const chunks: Uint8Array[] = [];
+  let total = 0;
+  for await (const chunk of stream) {
+    const bytes = toBytes(chunk);
+    chunks.push(bytes);
+    total += bytes.length;
+    if (total > maxBytes) {
+      throw new Error(`${label} message too large: ${total} bytes exceeds max ${maxBytes}`);
+    }
+  }
+
+  const data = new Uint8Array(total);
+  let offset = 0;
+  for (const chunk of chunks) {
+    data.set(chunk, offset);
+    offset += chunk.length;
+  }
+  return data;
+}