@rdlabo/capacitor-brotherprint 6.0.3 → 6.2.0-0

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/GenericMobileLabelModelPrintSettingsViewController.h

@@ -0,0 +1,50 @@
+//
+//  GenericMobileLabelModelPrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/27/13.
+//  Copyright (c) 2013 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/PrintSettingsViewController.h>
+#import <BRLMPrinterKit/GenericMobileLabelModelPrintSettings.h>
+#import <BRLMPrinterKit/PrintSettingTableViewController.h> // for PrintSettingTableViewResponder protocol, internal use only
+
+
+////////////////////////////////////////////////////////////////////////////////
+
+
+//*********************************************************************
+// GenericMobileLabelModelPrintSettingsViewController INTERFACE
+//
+//*** IMPORTANT: *** DO NOT INSTANTIATE AN OBJECT OF THIS CLASS!!!!! ***
+// The GenericMobileLabelModelPrintSettingsViewController class is essentially an
+// ABSTRACT class.
+// Instead, you should instantiate the model-specific class,
+// e.g. RJ4040PrintSettingsViewController.
+//*********************************************************************
+
+
+@interface GenericMobileLabelModelPrintSettingsViewController : PrintSettingsViewController < UITableViewDelegate, UITableViewDataSource, PrintSettingTableViewResponder>
+{
+}
+
+// "style" MUST be set to UITableViewStyleGrouped!!
+-(id)initWithStyle:(UITableViewStyle)style;
+
+
+// SDK Designers: The PrintSettingsViewController superclass defines several properties:
+//   printSettings, popoverSize, rowHeight, fontSize, printSettingsDelegate,
+//   showIPAddressHelpButton, IPAddressHelpFileName, and showSettingsOptionMask.
+// So, they are not defined in here.
+// However, this class and/or a model-specific subclass should "init" these properties
+// and handle setter overrides (if necessary).
+//
+// SDK Users: You should be familiar with the superclass properties so you can set
+// them accordingly, in particular the printSettingsDelegate (which handles
+// the PrintSettingsResponder protocol).
+
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/GenericPocketJetPrintSettings.h

@@ -0,0 +1,99 @@
+//
+//  GenericPocketJetPrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/23/15.
+//  Copyright (c) 2012-15 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/PrintSettings.h>
+
+typedef enum
+{
+    kCustomPaperAlignLeft = 0,
+    kCustomPaperAlignCenter,
+} CUSTOMPAPERALIGN;
+
+@interface GenericPocketJetPrintSettings : PrintSettings <PrintSettingsDelegate>
+{
+    // provide subclasses with access to readonly properties via ivars.
+    // Because they are readonly, there is no "Setter" method available in the superclass.
+    // The subclasses should be the only place where these properties are set.
+    // But, they will be used in this superclass.
+    // Users of this superclass can read the values if desired, but in most cases this
+    // will not be necessary.
+    int _resolutionHorz;
+    int _resolutionVert;
+    int _customPaperWidthDotsMin;
+    int _customPaperWidthDotsMax;
+    int _customPaperLengthDotsMin;
+    int _customPaperLengthDotsMax;
+    int _extraFeedMax;
+}
+
+
+//*** IMPORTANT (for SDK Users):
+// *** DO NOT INSTANTIATE AN OBJECT OF THIS CLASS!!!!! ***
+// The GenericPocketJetPrintSettings class is essentially an ABSTRACT class.
+// Instead, you should instantiate the model-specific class, e.g. PJ673PrintSettings.
+
+//*** The following properties should be set by your app code, either PROGRAMMATICALLY
+// or by using one of the PrintSettingsViewControllers (which may not set all properties).
+
+// The properties and methods in this super-class will be COMMON for all
+// of the PocketJet printer models.
+
+// SDK Users: All of the properties below (and those in the PrintSettings superclass)
+// are settable by you to change the printer behavior.
+// If you are not using the PrintSettingsViewController (either the SDK's or your own custom one),
+// then you should set each of these properties programmatically to your desired setting.
+@property (nonatomic, assign) PAPERSIZE paperSize;
+@property (nonatomic, assign) PAPERTYPE paperType;
+@property (nonatomic, assign) FORMFEEDMODE formFeedMode;
+@property (nonatomic,assign) int extraFeed; // used with kFormFeedModeNoFeed only
+@property (nonatomic, assign) DENSITY density;
+// These 3 properties are used ONLY when paperSize is set to kPaperSizeCustom!
+@property (nonatomic, assign) int customPaperWidthDots;
+@property (nonatomic, assign) int customPaperLengthDots;
+@property (nonatomic, assign) CUSTOMPAPERALIGN customPaperAlign;
+
+
+//*** The properties below are READ ONLY. SDK Users can NOT set them!!
+// Each subclass MUST set them to their model-specific values in their init method.
+// The purpose of this GenericPocketJetPrintSettings class is to implement COMMON
+// code so it does not have to be duplicated for each similar printer model. However, it
+// requires these model-dependent properties to be set by the SUBCLASS.
+@property (readonly, nonatomic, assign) int resolutionHorz;
+@property (readonly, nonatomic, assign) int resolutionVert;
+@property (readonly, nonatomic, assign) int customPaperWidthDotsMin;
+@property (readonly, nonatomic, assign) int customPaperWidthDotsMax;
+@property (readonly, nonatomic, assign) int customPaperLengthDotsMin;
+@property (readonly, nonatomic, assign) int customPaperLengthDotsMax;
+@property (readonly, nonatomic, assign) int extraFeedMax;
+
+
+// *** PrintSettingsDelegate protocol
+// All subclasses of PrintSettings are required to implement these methods.
+// validatePrintSettings - This function assures that all properties are in range
+// and that there are no conflicting settings. 
+- (BOOL)validatePrintSettings;
+- (void) loadPreferences;
+- (void) savePreferences;
+//generate strings from CURRENT settings, for convenience.
+// This is part of the PrintSettingsDelegateProtocol too.
+- (NSString *)stringFromCurrentPaperType;
+- (NSString *)stringFromCurrentPaperSize;
+- (NSString *)stringFromCurrentFormFeedMode;
+- (NSString *)stringFromCurrentExtraFeed;
+- (NSString *)stringFromCurrentDensity;
+
+
+//*** generate strings from constants, for convenience
+- (NSString *)stringFromPaperType: (PAPERTYPE)paperType;
+- (NSString *)stringFromPaperSize: (PAPERSIZE)paperSize;
+- (NSString *)stringFromFormFeedMode: (FORMFEEDMODE)ffmode;
+- (NSString *)stringFromExtraFeed:(int)extraFeed;
+- (NSString *)stringFromDensity: (DENSITY)density;
+
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/GenericPocketJetPrintSettingsViewController.h

@@ -0,0 +1,47 @@
+//
+//  GenericPocketJetPrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 8/8/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/PrintSettingsViewController.h>
+#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
+#import <BRLMPrinterKit/PrintSettingTableViewController.h> // for PrintSettingTableViewResponder protocol, internal use only
+
+
+
+
+//*********************************************************************
+// GenericPocketJetPrintSettingsViewController INTERFACE
+//
+//*** IMPORTANT: *** DO NOT INSTANTIATE AN OBJECT OF THIS CLASS!!!!! ***
+// The GenericPocketJetPrintSettingsViewController class is essentially an
+// ABSTRACT class.
+// Instead, you should instantiate the model-specific class,
+// e.g. PJ673PrintSettingsViewController.
+//*********************************************************************
+
+@interface GenericPocketJetPrintSettingsViewController : PrintSettingsViewController <UITableViewDelegate, UITableViewDataSource, PrintSettingTableViewResponder>
+{
+}
+
+// "style" MUST be set to UITableViewStyleGrouped!!
+-(id)initWithStyle:(UITableViewStyle)style;
+
+// SDK Designers: The PrintSettingsViewController superclass defines several properties:
+//   printSettings, popoverSize, rowHeight, fontSize, printSettingsDelegate,
+//   showIPAddressHelpButton, IPAddressHelpFileName, and showSettingsOptionMask.
+// So, they are not defined in here.
+// However, this class and/or a model-specific subclass should "init" these properties
+// and handle setter overrides (if necessary).
+//
+// SDK Users: You should be familiar with the superclass properties so you can set
+// them accordingly, in particular the printSettingsDelegate (which handles
+// the PrintSettingsResponder protocol).
+
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/ImageCreationBlock.h

@@ -0,0 +1,17 @@
+//
+//  ImageCreationBlock.h
+//  BRLMPrinterKit
+//
+//  Created by banro on 2021/11/15.
+//  Copyright © 2021 Brother Industries. All rights reserved.
+//
+
+#ifndef ImageCreationBlock_h
+#define ImageCreationBlock_h
+
+#import <Foundation/Foundation.h>
+
+// _Nonnullを一つでも使うと、そのヘッダーファイル内全ての関数に警告が表示されてしまうのでヘッダーを分離している
+typedef _Nonnull CGImageRef (^ImageCreationBlock)(void);
+
+#endif /* ImageCreationBlock_h */

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ673PrintSettings.h

@@ -0,0 +1,43 @@
+//
+//  PJ673PrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/11/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
+
+@interface PJ673PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
+
+// These constants below are provided for reference only. DO NOT MODIFY!
+#define PJ673_RESOLUTION_HORZ 300
+#define PJ673_RESOLUTION_VERT 300
+
+// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
+#define PJ673_MAX_EXTRAFEEDDOTS (11*PJ673_RESOLUTION_VERT)
+
+// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
+// And, the setter functions will clip to these values. The reasons for these choices are described below.
+// If you require something different for some reason, please contact Technical Support.
+#define PJ673_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
+#define PJ673_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
+#define PJ673_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
+#define PJ673_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ673PrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericPocketJetPrintSettings superclass.
+
+// SDK Designers:
+// The GenericPocketJetPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
+
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ673PrintSettingsViewController.h

@@ -0,0 +1,40 @@
+//
+//  PJ673PrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 8/8/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ673PrintSettings.h>
+
+// This is the DEFAULT popup contentSize for PJ673PrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+#define PJ673POPUPCONTENTSIZE CGSizeMake(400,480)
+#define PJ673POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+/*
+ This class is a subclass of GenericPocketJetPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:
+ DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. PJ673PrintSettingsViewController
+ */
+
+@interface PJ673PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ763MFiPrintSettings.h

@@ -0,0 +1,45 @@
+//
+//  PJ763MFiPrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/11/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
+
+@interface PJ763MFiPrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
+
+// These constants below are provided for reference only. DO NOT MODIFY!
+#define PJ763MFi_RESOLUTION_HORZ 300
+#define PJ763MFi_RESOLUTION_VERT 300
+
+// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
+#define PJ763MFi_MAX_EXTRAFEEDDOTS (11*PJ763MFi_RESOLUTION_VERT)
+
+// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
+// And, the setter functions will clip to these values. The reasons for these choices are described below.
+// If you require something different for some reason, please contact Technical Support.
+#define PJ763MFi_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
+#define PJ763MFi_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
+#define PJ763MFi_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
+#define PJ763MFi_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ763MFiPrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericPocketJetPrintSettings superclass.
+
+// SDK Designers:
+// The GenericPocketJetPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
+@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
+@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
+
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ763MFiPrintSettingsViewController.h

@@ -0,0 +1,41 @@
+//
+//  PJ763MFiPrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 8/8/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ763MFiPrintSettings.h>
+
+// This is the DEFAULT popup contentSize for PJ763MFiPrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define PJ763MFiPOPUPCONTENTSIZE CGSizeMake(400,480)
+#define PJ763MFiPOPUPCONTENTSIZE CGSizeMake(400,548)
+#define PJ763MFiPOPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+/*
+ This class is a subclass of GenericPocketJetPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:
+ DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. PJ763MFiPrintSettingsViewController
+ */
+
+@interface PJ763MFiPrintSettingsViewController : GenericPocketJetPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ773PrintSettings.h

@@ -0,0 +1,46 @@
+//
+//  PJ773PrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/11/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
+
+
+@interface PJ773PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
+
+// These constants below are provided for reference only. DO NOT MODIFY!
+#define PJ773_RESOLUTION_HORZ 300
+#define PJ773_RESOLUTION_VERT 300
+
+// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
+#define PJ773_MAX_EXTRAFEEDDOTS (11*PJ773_RESOLUTION_VERT)
+
+// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
+// And, the setter functions will clip to these values. The reasons for these choices are described below.
+// If you require something different for some reason, please contact Technical Support.
+#define PJ773_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
+#define PJ773_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
+#define PJ773_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
+#define PJ773_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ773PrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericPocketJetPrintSettings superclass.
+
+// SDK Designers:
+// The GenericPocketJetPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
+@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
+@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
+
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ773PrintSettingsViewController.h

@@ -0,0 +1,41 @@
+//
+//  PJ773PrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 8/8/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ773PrintSettings.h>
+
+// This is the DEFAULT popup contentSize for PJ773PrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define PJ773POPUPCONTENTSIZE CGSizeMake(400,480)
+#define PJ773POPUPCONTENTSIZE CGSizeMake(400,548)
+#define PJ773POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+/*
+ This class is a subclass of GenericPocketJetPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:
+ DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. PJ773PrintSettingsViewController
+ */
+
+@interface PJ773PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ862PrintSettings.h

@@ -0,0 +1,47 @@
+//
+//  PJ862PrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 5/6/22.
+//  Copyright (c) 2022 BMS. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
+
+
+@interface PJ862PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
+
+// These constants below are provided for reference only. DO NOT MODIFY!
+// NOTE: Printer is actually 203x203, but Command Ref Guide is defining all specs as though 200x200.
+#define PJ862_RESOLUTION_HORZ 200
+#define PJ862_RESOLUTION_VERT 200
+
+// Arbitrarily restrict extraFeed to 11". There is no reason to be larger.
+#define PJ862_MAX_EXTRAFEEDDOTS (11*PJ862_RESOLUTION_VERT)
+
+// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
+// And, the setter functions will clip to these values. The reasons for these choices are described below.
+// If you require something different for some reason, please contact Technical Support.
+#define PJ862_CUSTOM_WIDTHDOTS_MIN 800 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
+#define PJ862_CUSTOM_WIDTHDOTS_MAX 1700 // 8.5" = max paper width
+#define PJ862_CUSTOM_LENGTHDOTS_MIN 400 // 2" to allow PerfRoll paper to print anything due to large unprintable area
+#define PJ862_CUSTOM_LENGTHDOTS_MAX 20000 // 100", arbitrary
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ862PrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericPocketJetPrintSettings superclass.
+
+// SDK Designers:
+// The GenericPocketJetPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
+@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
+@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
+
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ862PrintSettingsViewController.h

@@ -0,0 +1,41 @@
+//
+//  PJ862PrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 5/6/22.
+//  Copyright (c) 2022 BMS. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ862PrintSettings.h>
+
+// This is the DEFAULT popup contentSize for PJ862PrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define PJ862POPUPCONTENTSIZE CGSizeMake(400,480)
+#define PJ862POPUPCONTENTSIZE CGSizeMake(400,548)
+#define PJ862POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+/*
+ This class is a subclass of GenericPocketJetPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:
+ DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. PJ862PrintSettingsViewController
+ */
+
+@interface PJ862PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
+{
+}
+
+@end
+
+

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ863PrintSettings.h

@@ -0,0 +1,46 @@
+//
+//  PJ863PrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 5/6/22.
+//  Copyright (c) 2022 BMS. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
+
+
+@interface PJ863PrintSettings : GenericPocketJetPrintSettings <PrintSettingsDelegate>
+
+// These constants below are provided for reference only. DO NOT MODIFY!
+#define PJ863_RESOLUTION_HORZ 300
+#define PJ863_RESOLUTION_VERT 300
+
+// Arbitrarily restrict extraFeed to 11" at 300 dpi. There is no reason to be larger.
+#define PJ863_MAX_EXTRAFEEDDOTS (11*PJ863_RESOLUTION_VERT)
+
+// NOTE: These custom MIN/MAX settings will be built into framework, so you can't change them.
+// And, the setter functions will clip to these values. The reasons for these choices are described below.
+// If you require something different for some reason, please contact Technical Support.
+#define PJ863_CUSTOM_WIDTHDOTS_MIN 1200 // 4" due to likely skewing of narrower paper. Otherwise can be lower.
+#define PJ863_CUSTOM_WIDTHDOTS_MAX 2550 // 8.5" = max paper width
+#define PJ863_CUSTOM_LENGTHDOTS_MIN 600 // 2" to allow PerfRoll paper to print anything due to large unprintable area
+#define PJ863_CUSTOM_LENGTHDOTS_MAX 30000 // 100", arbitrary
+
+//*** IMPORTANT ***
+// SDK Users:
+// You should NEVER instantiate an object of the GenericPocketJetPrintSettings class.
+// Instead, you should instantiate one of the model-specific subclasses (i.e. PJ863PrintSettings).
+//
+// For a list of important properties in the settings that your application needs to set,
+// refer to the GenericPocketJetPrintSettings superclass.
+
+// SDK Designers:
+// The GenericPocketJetPrintSettings class handles all the important work.
+// This subclass only needs to provide the model-specific data to the generic class.
+
+//*** ADDITIONAL PROPERTIES not handled by GenericPocketJetPrintSettings
+@property (nonatomic, assign) ROLL_CASE_OPTION rollCaseOption;
+@property (nonatomic, assign) PRINT_SPEED_OPTION printSpeedOption;
+
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/PJ863PrintSettingsViewController.h

@@ -0,0 +1,41 @@
+//
+//  PJ863PrintSettingsViewController.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 5/6/22.
+//  Copyright (c) 2022 BMS. All rights reserved.
+//
+
+#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ863PrintSettings.h>
+
+// This is the DEFAULT popup contentSize for PJ863PrintSettingsViewController.
+//
+// You can override this by setting the "popoverSize" property (defined in the
+// PrintSettingsViewController superclass) to something different
+// before showing the ViewController.
+//
+// The popoverSize setting will be propagated to all of the "child" ViewControllers
+// of the main ViewController so all of the detail views will be the SAME size as each other.
+//
+// NOTE: iPad1 and iPad2 size = 1024 x 768, iPad3 = 2048 x 1536
+//#define PJ863POPUPCONTENTSIZE CGSizeMake(400,480)
+#define PJ863POPUPCONTENTSIZE CGSizeMake(400,548)
+#define PJ863POPUPCONTENTSIZE_IOS7 CGSizeMake(400,588)
+
+/*
+ This class is a subclass of GenericPocketJetPrintSettingsViewController,
+ which implements all the major functionality.
+ 
+ *** SDK Users:
+ DO NOT INSTANTIATE an instance of GenericPocketJetPrintSettingsViewController.
+ Always instantiate a model-specific class, e.g. PJ863PrintSettingsViewController
+ */
+
+@interface PJ863PrintSettingsViewController : GenericPocketJetPrintSettingsViewController
+{
+}
+
+@end
+
+