@rdlabo/capacitor-brotherprint 6.0.3 → 6.2.0-0

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BMSPrinterDriver.h

@@ -17,11 +17,11 @@
 // However, we CAN use the "BRPtouchPrinterKit.h" syntax, since we have added the BIL SDK .h
 // files to our project.
 //#import <BRPtouchPrinterKit/BRPtouchPrinterKit.h>
-#import "BRPtouchPrinterKit.h"
+#import <BRLMPrinterKit/BRPtouchPrinterKit.h>
 
 #endif
 
-#import "PrintSettings.h"
+#import <BRLMPrinterKit/PrintSettings.h>
 
 //*** NOTIFICATIONS
 // Register for these if you wish to receive notifications for the following messages.
@@ -172,10 +172,11 @@
 #define RET_CHANNEL_WRITE_ERROR      -1009 // error occurred while writing data, such as if channel disconnected
 #define RET_CHANNEL_READ_ERROR       -1010 // error occurred while reading data, such as if channel disconnected
 
-// This is used only by WIFI and FILE channel.
 // In previous SDKs, RET_CHANNEL_CREATEERROR was used instead, but now we differentiate between these cases.
 // NOTE: With WIFI channel especially, this can occur when user tries to start a job too quickly after a failure.
-// Generally, using "isPrinterReady" API before calling openChannel can avoid this.
+//       It may be reported only when trying to open the channel.
+// NOTE: With BT channel, it can be reported in open, send, or read, if error event occurs on stream.
+//       But I don't know how to cause it. Never seen it happen.
 #define RET_CHANNEL_STREAMSTATUS_ERROR     -1011
 
 // These are used only for BT channel
@@ -199,6 +200,10 @@
 #define RET_PRINTERSTATUS_ERROR_MEDIACANNOTBEFED       -1021 // This is different from media empty. Treated as an error.
 #define RET_PRINTERSTATUS_ERROR_UNKNOWNERROR           -1022 // If status response processor gets unhandled error
 
+//** 6/8/23: Added NEW error codes. Not changing old constants above, to be safe.
+// This occurs if "app switch" in middle of BT transfer (if no app support for background processing).
+// NOTE: It does not seem to happen on WIFI.
+#define RET_CHANNEL_STREAM_END_OCCURRED                -1023
 
 // *************************************************************************************
 
@@ -464,22 +469,16 @@ typedef enum
            timeout:(int)nTimeout;
 
 
-// "wrappers" for isPrinterReady and getPTStatus.
-// * isPrinterReady is useful to check for connectivity before attempting to print.
+// "wrapper" for getPTStatus.
 // * getPTStatus allows to you determine things like the actual connected model, paper inserted, cover open, etc.
 // Refer to the BRPtouchSDK documentation for more details about the format and meaning of the status response.
 
 // TAG: REMOVE_BRPTOUCH_SDK
-// When using the "RemoveBRPtouchSDK" framework, isPrinterReady and getPTStatus are NOT supported
+// When using the "RemoveBRPtouchSDK" framework, getPTStatus is NOT supported
 // for the WIFI channel, because WIFI channel requires using the BRPtouchSDK API.
-// However, for the Bluetooth channel, these functions are implemented internally to the BMS SDK, so you may still
-// use these two APIs.
-
-- (BOOL)isPrinterReady:(PRINTERMODEL)model
-           channelType:(CHANNELTYPE)channelType
-         channelString:(NSString *)channelString; // IPAddress or BTDeviceName
 
 #ifdef REMOVE_BRPTOUCH_SDK
+// Need this struct from other SDK when using our own getPTStatus implementation for Bluetooth.
 typedef struct _PTSTATUSINFO {
     Byte	byHead;						// Head mark
     Byte	bySize;						// Size
@@ -527,6 +526,22 @@ typedef struct _PTSTATUSINFO {
 - (CGRect) getPrintableRectFromCurrentSettings;
 - (CGRect) getPaperRectFromCurrentSettings;
 
+//********************************************************************************
+// detectPrinterResolutionForModel
+// Used to determine resolution of print head installed to TD23xx models ONLY
+// 203, 300 models have different byModelCode in Status Response
+// Each of these models supports only 1 resolution at a time.
+//
+// RETURNS:
+// * RET_TRUE on success, detectedResolution is VALID
+// * Other error code if FAILURE. detectedResolution is INVALID
+- (int) detectPrinterResolutionForModel:(PRINTERMODEL)model
+                            channelType:(CHANNELTYPE)channelType
+                          channelString:(NSString *)channelString // IPAddress or BTDeviceName
+                     detectedResolution:(RESOLUTION *)pResolution;
+//********************************************************************************
+
+
 //********************************************************************************
 // SIMPLE APIs
 //

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64/BRLMPrinterKit.framework/Headers/BMSPrinterKit.h

@@ -0,0 +1,88 @@
+//
+//  BMSPrinterKit.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/6/12.
+//  Copyright (c) 2012 Brother Mobile Solutions. All rights reserved.
+//
+
+
+#ifndef REMOVE_BRPTOUCH_SDK
+#import <BRLMPrinterKit/BRPtouchPrinterKit.h>
+#endif
+
+#import <BRLMPrinterKit/BMSPrinterDriver.h>
+
+#import <BRLMPrinterKit/PrintSettings.h>
+#import <BRLMPrinterKit/GenericPocketJetPrintSettings.h>
+#import <BRLMPrinterKit/PJ673PrintSettings.h>
+#import <BRLMPrinterKit/PJ763MFiPrintSettings.h>
+#import <BRLMPrinterKit/PJ773PrintSettings.h>
+#import <BRLMPrinterKit/PJ862PrintSettings.h>
+#import <BRLMPrinterKit/PJ863PrintSettings.h>
+#import <BRLMPrinterKit/PJ883PrintSettings.h>
+#import <BRLMPrinterKit/GenericMobileLabelModelPrintSettings.h>
+#import <BRLMPrinterKit/RJ4030AiPrintSettings.h>
+#import <BRLMPrinterKit/RJ4040PrintSettings.h>
+#import <BRLMPrinterKit/RJ4230BPrintSettings.h>
+#import <BRLMPrinterKit/RJ4250WBPrintSettings.h>
+#import <BRLMPrinterKit/RJ3050PrintSettings.h>
+#import <BRLMPrinterKit/RJ3050AiPrintSettings.h>
+#import <BRLMPrinterKit/RJ3150PrintSettings.h>
+#import <BRLMPrinterKit/RJ3150AiPrintSettings.h>
+#import <BRLMPrinterKit/RJ3230BPrintSettings.h>
+#import <BRLMPrinterKit/RJ3250WBPrintSettings.h>
+#import <BRLMPrinterKit/RJ2050PrintSettings.h>
+#import <BRLMPrinterKit/RJ2140PrintSettings.h>
+#import <BRLMPrinterKit/RJ2150PrintSettings.h>
+#import <BRLMPrinterKit/TD2120NPrintSettings.h>
+#import <BRLMPrinterKit/TD2125NPrintSettings.h>
+#import <BRLMPrinterKit/TD2125NWBPrintSettings.h>
+#import <BRLMPrinterKit/TD2130NPrintSettings.h>
+#import <BRLMPrinterKit/TD2135NPrintSettings.h>
+#import <BRLMPrinterKit/TD2135NWBPrintSettings.h>
+#import <BRLMPrinterKit/TD2320DPrintSettings.h>
+#import <BRLMPrinterKit/TD2320DFPrintSettings.h>
+#import <BRLMPrinterKit/TD2350DPrintSettings.h>
+#import <BRLMPrinterKit/TD2350DFPrintSettings.h>
+#import <BRLMPrinterKit/TD2350DSAPrintSettings.h>
+#import <BRLMPrinterKit/TD4550DNWBPrintSettings.h>
+
+#import <BRLMPrinterKit/PrintSettingsViewController.h>
+#import <BRLMPrinterKit/GenericPocketJetPrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ673PrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ763MFiPrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ773PrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ862PrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ863PrintSettingsViewController.h>
+#import <BRLMPrinterKit/PJ883PrintSettingsViewController.h>
+#import <BRLMPrinterKit/GenericMobileLabelModelPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ4030AiPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ4040PrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ4230BPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ4250WBPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ3050PrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ3050AiPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ3150PrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ3150AiPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ3230BPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ3250WBPrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ2050PrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ2140PrintSettingsViewController.h>
+#import <BRLMPrinterKit/RJ2150PrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2120NPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2125NPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2125NWBPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2130NPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2135NPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2135NWBPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2320DPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2320DFPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2350DPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2350DFPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD2350DSAPrintSettingsViewController.h>
+#import <BRLMPrinterKit/TD4550DNWBPrintSettingsViewController.h>
+
+@interface BMSPrinterKit : NSObject
+
+@end

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRCustomPaperInfoCommand.h

@@ -34,6 +34,8 @@ typedef enum  {
     MarkPosition = 8,
     MarkHeight = 9,
     DisplayName = 10,
+    NotSupportPrinter = 11,
+    PrinterName = 40,
 }ErrorParameterName;
 
 typedef enum  {
@@ -43,6 +45,7 @@ typedef enum  {
     BelowTheLowerLimit = 3,
     FailToCreateCommand = 4,
     FailToReadPTDFile = 5,
+    UnSupported = 11,
 }ErrorParameterDetail;
 
 
@@ -59,10 +62,10 @@ typedef enum  {
 @property(readonly) float markHeight_;
 @property(readonly) UnitOfLengthParameter unitOfLengthParameter_;
 @property(readonly) PaperKindParameter paperKindParameter_;
+@property(readonly) int energyRank_;
 
 // Advance Settings
 @property(nonatomic, strong) NSString *displayName;
-@property(readwrite) int energyRank;
 @property(readwrite) float dieStartRevPlus;
 @property(readwrite) float dieStartFwdPlus;
 @property(readwrite) float afterFeedPlus;
@@ -97,10 +100,41 @@ typedef enum  {
                            markHeight: (float) markHeight
                          unitOfLength: (UnitOfLengthParameter) unitOfLengthParameter;
 
+- (id) initWithPrinterNameForRoll: (NSString *) printerName
+                        tapeWidth: (float) tapeWidth
+                      rightMargin: (float) rightMargin
+                        leftMagin: (float) leftMagin
+                        topMargin: (float) topMargin
+                     unitOfLength: (UnitOfLengthParameter) unitOfLengthParameter
+                       energyRank: (unsigned int) energyRank;
+
+- (id) initWithPrinterNameForDieCut: (NSString *) printerName
+                          tapeWidth: (float) tapeWidth
+                         tapeLength: (float) tapeLength
+                        rightMargin: (float) rightMargin
+                          leftMagin: (float) leftMagin
+                          topMargin: (float) topMargin
+                       bottomMargin: (float) bottomMargin
+                         labelPitch: (float) labelPitch
+                       unitOfLength: (UnitOfLengthParameter) unitOfLengthParameter
+                         energyRank: (unsigned int) energyRank;
+
+- (id) initWithPrinterNameForMarkRoll: (NSString *) printerName
+                            tapeWidth: (float) tapeWidth
+                           tapeLength: (float) tapeLength
+                          rightMargin: (float) rightMargin
+                            leftMagin: (float) leftMagin
+                            topMargin: (float) topMargin
+                         bottomMargin: (float) bottomMargin
+                         markPosition: (float) markPosition
+                           markHeight: (float) markHeight
+                         unitOfLength: (UnitOfLengthParameter) unitOfLengthParameter
+                           energyRank: (unsigned int) energyRank;
+
 - (NSData *) getCustomPaperInfoCommandData: (NSMutableArray **)errorArr;
 
-- (NSString *) valueOfErrorParameter:(ErrorParameterName)errorParameterName;
-- (NSString *) valueOfErrorParameterDetail:(ErrorParameterDetail)errorParameterDetail;
++ (NSString *) valueOfErrorParameter:(ErrorParameterName)errorParameterName;
++ (NSString *) valueOfErrorParameterDetail:(ErrorParameterDetail)errorParameterDetail;
 
 @end
 

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64/BRLMPrinterKit.framework/Headers/BRLMBLESearchOption.h

@@ -0,0 +1,18 @@
+//
+//  BRLMBLESearchOption.h
+//  BRLMPrinterKit
+//
+//  Created by shintaro on 2023/01/13.
+//  Copyright © 2023 Brother Industries. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface BRLMBLESearchOption : NSObject
+@property(nonatomic)NSTimeInterval searchDuration;
+- (instancetype)copy __unavailable;
+@end
+
+NS_ASSUME_NONNULL_END

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64/BRLMPrinterKit.framework/Headers/BRLMBatteryInfo.h

@@ -0,0 +1,29 @@
+//
+//  BRLMBatteryInfo.h
+//  BRLMPrinterKit
+//
+//  Created by shintaro on 2023/07/03.
+//  Copyright © 2023 Brother Industries. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+typedef NS_ENUM(NSInteger, BRLMBatteryInfoHealthStatus ) {
+        BRLMBatteryInfoHealthStatusExcellent = 0,
+        BRLMBatteryInfoHealthStatusGood = 1,
+        BRLMBatteryInfoHealthStatusReplaceSoon = 2,
+        BRLMBatteryInfoHealthStatusReplaceBattery = 3,
+        BRLMBatteryInfoHealthStatusNotInstalled = 7,
+};
+
+@interface BRLMBatteryInfo : NSObject
+
+- (instancetype)init __unavailable;
+- (instancetype)copy __unavailable;
+
+@property (nonatomic, readonly) NSInteger chargeLevel;
+@property (nonatomic, readonly) NSInteger healthLevel;
+@property (nonatomic, readonly) BRLMBatteryInfoHealthStatus healthStatus;
+
+
+@end

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMChannel.h

@@ -1,18 +1,23 @@
 //
-//  BRLMPrinterAddress.h
+//  BRLMChannel.h
 //  BRLMPrinterKit
 //
 //  Copyright © 2020 Brother Industries, Ltd. All rights reserved.
 //
 
 #import <Foundation/Foundation.h>
-#import "BRLMPrinterDefine.h"
+#import <BRLMPrinterKit/BRLMPrinterDefine.h>
 
-// Set the "serialNumber" that can be getting from EAAccessory.
-// Or set the "Bluetooth Address" that can be getting from your printer (*by self-printing and so on).
-// Please note that it is NOT the serial number of your Printer.
 typedef NSString BRLMExternalAccessorySerialNumber;
 
+typedef NSString BRLMChannelExtraInfoKey;
+
+extern BRLMChannelExtraInfoKey * _Nonnull const BRLMChannelExtraInfoKeyModelName;
+extern BRLMChannelExtraInfoKey * _Nonnull const BRLMChannelExtraInfoKeySerialNumber;
+extern BRLMChannelExtraInfoKey * _Nonnull const BRLMChannelExtraInfoKeyMacAddress;
+extern BRLMChannelExtraInfoKey * _Nonnull const BRLMChannelExtraInfoKeyNodeName;
+extern BRLMChannelExtraInfoKey * _Nonnull const BRLMChannelExtraInfoKeyLocation;
+
 
 NS_ASSUME_NONNULL_BEGIN
 
@@ -20,6 +25,8 @@ NS_ASSUME_NONNULL_BEGIN
 
 @property (nonatomic, readonly) BRLMChannelType channelType;
 @property (nonatomic, readonly) NSString *channelInfo;
+@property (nonatomic, readonly, nullable) NSMutableDictionary<BRLMChannelExtraInfoKey*, NSString*> *extraInfo;
+
 
 - (instancetype)initWithWifiIPAddress:(NSString *)ipAddress;
 - (instancetype)initWithBluetoothSerialNumber:(BRLMExternalAccessorySerialNumber *)serialNumber;

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMCustomPaperSize.h

@@ -6,7 +6,7 @@
 //
 
 #import <Foundation/Foundation.h>
-#import "BRLMPrintImageSettings.h"
+#import <BRLMPrinterKit/BRLMPrintImageSettings.h>
 
 NS_ASSUME_NONNULL_BEGIN
 
@@ -54,6 +54,26 @@ BRLMCustomPaperSizeMargins BRLMCustomPaperSizeMarginsMake(CGFloat top, CGFloat l
 
 - (instancetype) initWithFile:(NSURL*)filePath;
 
+- (instancetype) initRollWithTapeWidth:(CGFloat) tapeWidth
+                               margins:(BRLMCustomPaperSizeMargins)margins // disable bottomMargin
+                          unitOfLength:(BRLMCustomPaperSizeLengthUnit) unit
+                            energyRank:(unsigned int)energyRank;
+
+- (instancetype) initDieCutWithTapeWidth:(CGFloat) tapeWidth
+                              tapeLength:(CGFloat) tapeLength
+                                 margins:(BRLMCustomPaperSizeMargins)margins
+                               gapLength:(CGFloat) gapLength
+                            unitOfLength:(BRLMCustomPaperSizeLengthUnit) unit
+                              energyRank:(unsigned int)energyRank;
+
+- (instancetype) initMarkRollWithTapeWidth:(CGFloat) tapeWidth
+                                tapeLength:(CGFloat) tapeLength
+                                   margins:(BRLMCustomPaperSizeMargins)margins
+                              markPosition:(CGFloat) markVerticalOffset
+                                markHeight:(CGFloat) markLength
+                              unitOfLength:(BRLMCustomPaperSizeLengthUnit) unit
+                                energyRank:(unsigned int)energyRank;
+
 @property (nonatomic, readonly) BRLMCustomPaperSizePaperKind paperKind;
 @property (nonatomic, nullable, readonly) NSURL *paperBinFilePath;
 @property (nonatomic, readonly) CGFloat tapeWidth;
@@ -63,6 +83,7 @@ BRLMCustomPaperSizeMargins BRLMCustomPaperSizeMarginsMake(CGFloat top, CGFloat l
 @property (nonatomic, readonly) CGFloat markVerticalOffset;
 @property (nonatomic, readonly) CGFloat markLength;
 @property (nonatomic, readonly) BRLMCustomPaperSizeLengthUnit unit;
+@property (nonatomic, nullable, readonly) NSNumber* energyRank;
 
 @end
 

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMGetStatusError.h

@@ -5,10 +5,10 @@
 //  Copyright © 2020 Brother Industries, Ltd. All rights reserved.
 //
 
-#import "BRLMError.h"
+#import <BRLMPrinterKit/BRLMError.h>
 
 typedef NS_ENUM(NSInteger, BRLMGetStatusErrorCode) {
-    BRLMGetStatusErrorCodeNoError,
+    BRLMGetStatusErrorCodeNoError = 20000,
     BRLMGetStatusErrorCodePrinterNotFound,
     BRLMGetStatusErrorCodeTimeout,
 };

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64/BRLMPrinterKit.framework/Headers/BRLMLog.h

@@ -0,0 +1,27 @@
+//
+//  BRLMLog.h
+//  BRLMPrinterKit
+//
+//  Created by matsuo yu on 2022/07/19.
+//  Copyright © 2022 Brother Industries. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+typedef NS_ENUM(NSUInteger, BRLMLogLevel) {
+    BRLMLogLevelNotice = 1,
+    BRLMLogLevelWarning = 2,
+    BRLMLogLevelError = 3,
+};
+typedef int BRLMVariantErrorCode;
+@interface BRLMLog: NSObject
+@property (nonatomic, readonly, nonnull) NSString* timeStamp;
+@property (nonatomic, readonly) BRLMLogLevel level;
+@property (nonatomic, readonly, nonnull) NSString* errorDescription;
+@property (nonatomic, readonly) BRLMVariantErrorCode errorCode;
+@property (nonatomic, readonly, nonnull) NSString* whereCause;
+@property (nonatomic, readonly, nonnull) NSString* identificationCode;
+
+- (nonnull instancetype)init __unavailable;
+- (nonnull instancetype)copy __unavailable;
+@end

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMMWPrintSettings.h

@@ -1,17 +1,14 @@
-//
+// ------------------------------------------------------
 //  BRLMMWPrintSettings.h
 //  BRLMPrinterKit
 //
 //  Copyright © 2020 Brother Industries, Ltd. All rights reserved.
-//
-
-#import "BRLMPrintSettingsProtocol.h"
-#import "BRLMPrintImageSettings.h"
-
-#import "BRLMCustomPaperSize.h"
+// ------------------------------------------------------
 
-typedef float BRLMMWPrintLengthScale;
+#import <BRLMPrinterKit/BRLMPrintSettingsProtocol.h>
+#import <BRLMPrinterKit/BRLMPrintImageSettings.h>
 
+#import <BRLMPrinterKit/BRLMCustomPaperSize.h>
 
 typedef NS_ENUM(NSInteger, BRLMMWPrintSettingsPaperSize) {
     BRLMMWPrintSettingsPaperSizeA6,

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64/BRLMPrinterKit.framework/Headers/BRLMMWTemplatePrintSettings.h

@@ -0,0 +1,21 @@
+//
+//  BRLMMWTemplatePrintSettings.h
+//  BRLMPrinterKit
+//
+//  Created by shintaro on 2023/05/11.
+//  Copyright © 2023 Brother Industries. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import <BRLMPrinterKit/BRLMTemplatePrintSettingsProtocol.h>
+
+
+@interface BRLMMWTemplatePrintSettings : NSObject <BRLMTemplatePrintSettingsProtocol>
+- (nonnull instancetype)init __unavailable;
+- (nonnull instancetype)copy __unavailable;
+@property (nonatomic, readonly) BRLMPrinterModel printerModel;
+@property (nonatomic) NSUInteger numCopies;
+- (nullable instancetype)initDefaultPrintSettingsWithPrinterModel:(BRLMPrinterModel)model;
+- (nullable instancetype)copyWithPrinterModel:(BRLMPrinterModel)model;
+@end
+

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64/BRLMPrinterKit.framework/Headers/BRLMNetworkSearchOption.h

@@ -0,0 +1,20 @@
+//
+//  BRLMNetworkSearchOption.h
+//  BRLMPrinterKit
+//
+//  Created by Shintaro on 2022/12/23.
+//  Copyright © 2022 Brother Industries. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+NS_ASSUME_NONNULL_BEGIN
+
+@interface BRLMNetworkSearchOption : NSObject
+
+@property(nonatomic, nullable)NSArray<NSString *> *printerList;
+@property(nonatomic)NSTimeInterval searchDuration;
+- (instancetype)copy __unavailable;
+@end
+
+NS_ASSUME_NONNULL_END

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMOpenChannelError.h

@@ -5,10 +5,10 @@
 //  Copyright © 2020 Brother Industries, Ltd. All rights reserved.
 //
 
-#import "BRLMError.h"
+#import <BRLMPrinterKit/BRLMError.h>
 
 typedef NS_ENUM(NSInteger, BRLMOpenChannelErrorCode) {
-    BRLMOpenChannelErrorCodeNoError,
+    BRLMOpenChannelErrorCodeNoError = 30000,
     BRLMOpenChannelErrorCodeOpenStreamFailure,
     BRLMOpenChannelErrorCodeTimeout,
 };

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMPJPrintSettings.h

@@ -1,19 +1,26 @@
-//
+// ------------------------------------------------------
 //  BRLMPJPrintSettings.h
 //  BRLMPrinterKit
 //
 //  Copyright © 2020 Brother Industries, Ltd. All rights reserved.
-//
+// ------------------------------------------------------
 
-#import "BRLMPrintSettingsProtocol.h"
-#import "BRLMPrintImageSettings.h"
+#import <BRLMPrinterKit/BRLMPrintSettingsProtocol.h>
+#import <BRLMPrinterKit/BRLMPrintImageSettings.h>
 
-#import "BRLMPJPrintSettingsPaperSize.h"
+#import <BRLMPrinterKit/BRLMPJPrintSettingsPaperSize.h>
 
 typedef float BRLMPrintSettingsLengthScale;
 
 
 typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsPrintSpeed) {
+    BRLMPJPrintSettingsPrintSpeedHighSpeed,
+    BRLMPJPrintSettingsPrintSpeedMediumHighSpeed,
+    BRLMPJPrintSettingsPrintSpeedMediumLowSpeed,
+    BRLMPJPrintSettingsPrintSpeedLowSpeed,
+    BRLMPJPrintSettingsPrintSpeedFast_DraftQuality,
+    BRLMPJPrintSettingsPrintSpeedFast_LineConversion,
+    BRLMPJPrintSettingsPrintSpeedUsePrinterSetting,
     BRLMPJPrintSettingsPrintSpeed2_5inchPerSec,
     BRLMPJPrintSettingsPrintSpeed1_9inchPerSec,
     BRLMPJPrintSettingsPrintSpeed1_6inchPerSec,
@@ -35,6 +42,7 @@ typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsDensity) {
     BRLMPJPrintSettingsDensityUsePrinterSetting,
 };
 
+
 typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsFeedMode) {
     BRLMPJPrintSettingsFeedModeNoFeed,
     BRLMPJPrintSettingsFeedModeFixedPage,
@@ -42,6 +50,7 @@ typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsFeedMode) {
     BRLMPJPrintSettingsFeedModeEndOfPageRetract,
 };
 
+
 typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsPaperInsertionPosition) {
     BRLMPJPrintSettingsPaperInsertionPositionLeft,
     BRLMPJPrintSettingsPaperInsertionPositionCenter,
@@ -51,12 +60,15 @@ typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsPaperInsertionPosition) {
 typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsPaperType) {
     BRLMPJPrintSettingsPaperTypeRoll,
     BRLMPJPrintSettingsPaperTypeCutSheet,
+    BRLMPJPrintSettingsPaperTypePerforatedRoll,
 };
 
 typedef NS_ENUM(NSInteger, BRLMPJPrintSettingsRollCase) {
     BRLMPJPrintSettingsRollCaseNone,
     BRLMPJPrintSettingsRollCasePARC001_NoAntiCurl,
     BRLMPJPrintSettingsRollCasePARC001,
+    BRLMPJPrintSettingsRollCasePARC001_ShortFeed,
+    BRLMPJPrintSettingsRollCaseKeepPrinterSetting,
 };
 
 
@@ -69,11 +81,13 @@ NS_ASSUME_NONNULL_BEGIN
 @property (nonatomic) BRLMPJPrintSettingsPaperType paperType;
 @property (nonatomic) BRLMPJPrintSettingsPaperInsertionPosition paperInsertionPosition;
 @property (nonatomic) BRLMPJPrintSettingsFeedMode feedMode;
+@property (nonatomic) NSUInteger extraFeedDots;
 @property (nonatomic) BRLMPJPrintSettingsDensity density;
 @property (nonatomic) BRLMPJPrintSettingsRollCase rollCase;
 @property (nonatomic) BRLMPJPrintSettingsPrintSpeed printSpeed;
 @property (nonatomic) BOOL usingCarbonCopyPaper;
 @property (nonatomic) BOOL printDashLine;
+@property (nonatomic) NSUInteger forceStretchPrintableArea;
 
 // override
 - (nullable instancetype)initDefaultPrintSettingsWithPrinterModel:(BRLMPrinterModel)model;

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMPJPrintSettingsCustomPaperSize.h

@@ -13,12 +13,11 @@ NS_ASSUME_NONNULL_BEGIN
 
 @property (nonatomic, readonly) NSUInteger widthDots;
 @property (nonatomic, readonly) NSUInteger lengthDots;
-@property (nonatomic, readonly) NSUInteger feedDots;
 
 - (instancetype)init __unavailable;
 - (instancetype)copy __unavailable;
 
-- (instancetype)initWithWidthDots:(NSUInteger)width lengthDots:(NSUInteger)length feedDots:(NSUInteger)feed;
+- (instancetype)initWithWidthDots:(NSUInteger)width lengthDots:(NSUInteger)length;
 
 @end
 

package/ios/Pods/{BRLMPrinterKit/BRLMPrinterKit → BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64}/BRLMPrinterKit.framework/Headers/BRLMPJPrintSettingsPaperSize.h

@@ -7,7 +7,7 @@
 
 #import <Foundation/Foundation.h>
 
-#import "BRLMPJPrintSettingsCustomPaperSize.h"
+#import <BRLMPrinterKit/BRLMPJPrintSettingsCustomPaperSize.h>
 
 NS_ASSUME_NONNULL_BEGIN
 
@@ -16,6 +16,7 @@ typedef NS_ENUM(NSUInteger, BRLMPJPrintSettingsPaperSizeStandard) {
     BRLMPJPrintSettingsPaperSizeStandardLegal,
     BRLMPJPrintSettingsPaperSizeStandardLetter,
     BRLMPJPrintSettingsPaperSizeStandardA5,
+    BRLMPJPrintSettingsPaperSizeStandardA5_Landscape,
     BRLMPJPrintSettingsPaperSizeStandardCustom, // read only
 };
 

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64/BRLMPrinterKit.framework/Headers/BRLMPJTemplatePrintSettings.h

@@ -0,0 +1,21 @@
+//
+//  BRLMPJTemplatePrintSettings.h
+//  BRLMPrinterKit
+//
+//  Created by shintaro on 2023/05/11.
+//  Copyright © 2023 Brother Industries. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import <BRLMPrinterKit/BRLMTemplatePrintSettingsProtocol.h>
+
+
+@interface BRLMPJTemplatePrintSettings : NSObject <BRLMTemplatePrintSettingsProtocol>
+- (nonnull instancetype)init __unavailable;
+- (nonnull instancetype)copy __unavailable;
+@property (nonatomic, readonly) BRLMPrinterModel printerModel;
+@property (nonatomic) NSUInteger numCopies;
+- (nullable instancetype)initDefaultPrintSettingsWithPrinterModel:(BRLMPrinterModel)model;
+- (nullable instancetype)copyWithPrinterModel:(BRLMPrinterModel)model;
+@end
+