@rdlabo/capacitor-brotherprint 6.0.3 → 6.2.0-0

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/BRPtouchPrinter.h

@@ -0,0 +1,300 @@
+//
+//  BRPtouchPrinter.h
+//  BRPtouchPrinterKit
+//
+//  Copyright (c) 2012-2018 Brother Industries, Ltd. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import <QuartzCore/QuartzCore.h>
+#import <CoreGraphics/CoreGraphics.h>
+#import <UIKit/UIKit.h>
+
+#include <BRLMPrinterKit/BRPtouchPrintInfo.h>
+#include <BRLMPrinterKit/BRPtouchPrinterData.h>
+#include <BRLMPrinterKit/BRPtouchPrinterStatus.h>
+#include <BRLMPrinterKit/BRPtouchLabelParam.h>
+#include <BRLMPrinterKit/BRPtouchLabelInfoStatus.h>
+#import <BRLMPrinterKit/BRPtouchBatteryInfo.h>
+#import <BRLMPrinterKit/BRCustomPaperInfoCommand.h>
+#include <BRLMPrinterKit/BRPtouchTemplateInfo.h>
+#include <BRLMPrinterKit/ImageCreationBlock.h>
+#import <BRLMPrinterKit/BRLMPtouchDeviceDependedDataHeader.h>
+
+#define ERROR_NONE_          0
+#define ERROR_TIMEOUT		-3
+#define ERROR_BADPAPERRES	-4
+#define ERROR_IMAGELARGE	-6
+#define ERROR_CREATESTREAM	-7
+#define ERROR_OPENSTREAM	-8
+#define ERROR_FILENOTEXIST  -9
+#define ERROR_PAGERANGEERROR  -10
+#define ERROR_NOT_SAME_MODEL_ -11
+#define ERROR_BROTHER_PRINTER_NOT_FOUND_ -12
+#define ERROR_PAPER_EMPTY_ -13
+#define ERROR_BATTERY_EMPTY_ -14
+#define ERROR_COMMUNICATION_ERROR_ -15
+#define ERROR_OVERHEAT_ -16
+#define ERROR_PAPER_JAM_ -17
+#define ERROR_HIGH_VOLTAGE_ADAPTER_ -18
+#define ERROR_CHANGE_CASSETTE_ -19
+#define ERROR_FEED_OR_CASSETTE_EMPTY_ -20
+#define ERROR_SYSTEM_ERROR_ -21
+#define ERROR_NO_CASSETTE_ -22
+#define ERROR_WRONG_CASSENDTE_DIRECT_ -23
+#define ERROR_CREATE_SOCKET_FAILED_ -24
+#define ERROR_CONNECT_SOCKET_FAILED_ -25
+#define ERROR_GET_OUTPUT_STREAM_FAILED_ -26
+#define ERROR_GET_INPUT_STREAM_FAILED_ -27
+#define ERROR_CLOSE_SOCKET_FAILED_ -28
+#define ERROR_OUT_OF_MEMORY_ -29
+#define ERROR_SET_OVER_MARGIN_ -30
+#define ERROR_NO_SD_CARD_ -31
+#define ERROR_FILE_NOT_SUPPORTED_ -32
+#define ERROR_EVALUATION_TIMEUP_ -33
+#define ERROR_WRONG_CUSTOM_INFO_ -34
+#define ERROR_NO_ADDRESS_ -35
+#define ERROR_NOT_MATCH_ADDRESS_ -36
+#define ERROR_FILE_NOT_FOUND_ -37
+#define ERROR_TEMPLATE_FILE_NOT_MATCH_MODEL_ -38
+#define ERROR_TEMPLATE_NOT_TRANS_MODEL_ -39
+#define ERROR_COVER_OPEN_ -40
+#define ERROR_WRONG_LABEL_ -41
+#define ERROR_PORT_NOT_SUPPORTED_ -42
+#define ERROR_WRONG_TEMPLATE_KEY_ -43
+#define ERROR_BUSY_ -44
+#define ERROR_TEMPLATE_NOT_PRINT_MODEL_ -45
+#define ERROR_CANCEL_ -46
+#define ERROR_PRINTER_SETTING_NOT_SUPPORTED_ -47
+#define ERROR_INVALID_PARAMETER_ -48
+#define ERROR_INTERNAL_ERROR_ -49
+#define ERROR_TEMPLATE_NOT_CONTROL_MODEL_ -50
+#define ERROR_TEMPLATE_NOT_EXIST_ -51
+#define ERROR_BADENCRYPT_ -52 // This does not occur in iOS
+#define ERROR_BUFFER_FULL_ -53
+#define ERROR_TUBE_EMPTY_ -54
+#define ERROR_TUBE_RIBON_EMPTY_ -55
+#define ERROR_UPDATE_FRIM_NOT_SUPPORTED_ -56 // This does not occur in iOS
+#define ERROR_OS_VERSION_NOT_SUPPORTED_ -57 // This does not occur in iOS
+#define ERROR_MINIMUM_LENGTH_LIMIT_ -58
+#define ERROR_FAIL_TO_CONVERT_CSV_TO_BLF_ -59
+#define ERROR_RESOLUTION_MODE_ -60
+#define ERROR_MOTOR_SLOW_ -61
+#define ERROR_UNSUPPORTED_USB_CHARGER_ -62
+#define ERROR_UNSUPPORTED_OPTIONAL_EQUIPMENT_ -63
+
+
+//  Message value
+#define MESSAGE_START_COMMUNICATION_ 1
+#define MESSAGE_START_CONNECT_ 2
+#define MESSAGE_END_CONNECTED_ 3
+//#define MESSAGE_START_GET_OUTPUT_STREAM 4 // Not Available
+//#define MESSAGE_END_GET_OUTPUT_STREAM 5 // Not Available
+//#define MESSAGE_START_GET_INPUT_STREAM 6 // Not Available
+//#define MESSAGE_END_GET_INPUT_STREAM 7 // Not Available
+#define MESSAGE_START_SEND_STATUS_REQUEST_ 8
+#define MESSAGE_END_SEND_STATUS_REQUEST_ 9
+#define MESSAGE_START_READ_PRINTER_STATUS_ 10
+#define MESSAGE_END_READ_PRINTER_STATUS_ 11
+#define MESSAGE_START_CREATE_DATA_ 12
+#define MESSAGE_END_CREATE_DATA_ 13
+#define MESSAGE_START_SEND_DATA_ 14
+#define MESSAGE_END_SEND_DATA_ 15
+#define MESSAGE_START_SEND_TEMPLATE_ 16
+#define MESSAGE_END_SEND_TEMPLATE_ 17
+#define MESSAGE_START_SOCKET_CLOSE_ 18
+#define MESSAGE_END_SOCKET_CLOSE_ 19
+//#define MESSAGE_END_COMMUNICATION 20 // Not Available
+#define MESSAGE_PRINT_COMPLETE_ 21
+#define MESSAGE_PRINT_ERROR_ 22
+#define MESSAGE_PAPER_EMPTY_ 23
+#define MESSAGE_START_COOLING_ 24
+#define MESSAGE_END_COOLING_ 25
+//#define MESSAGE_PREPARATION 26 // Not Available
+#define MESSAGE_WAIT_PEEL_ 27
+#define MESSAGE_START_UPDATE_BLUETOOTH_SETTING_ 28
+#define MESSAGE_END_UPDATE_BLUETOOTH_SETTING_ 29
+#define MESSAGE_START_GET_BLUETOOTH_SETTING_ 30
+#define MESSAGE_END_GET_BLUETOOTH_SETTING_ 31
+#define MESSAGE_START_GET_TEMPLATE_LIST_ 32
+#define MESSAGE_END_GET_TEMPLATE_LIST_ 33
+#define MESSAGE_START_REMOVE_TEMPLATE_LIST_ 34
+#define MESSAGE_END_REMOVE_TEMPLATE_LIST_ 35
+#define MESSAGE_CANCEL_ 36
+//#define MESSAGE_START_TRANSFER_FIRM_ 39, //Not Available
+//#define MESSAGE_END_TRANSFER_FIRM_ 38, //Not Available
+#define MESSAGE_CHECK_PRINTER_STATUS_WHILE_CHANGE_STATUS_MODE_ON_ 39
+
+typedef NS_ENUM(NSUInteger, PrinterSettingItem) {
+    PSI_NET_BOOTMODE = 1,
+    PSI_NET_INTERFACE = 2,
+    PSI_NET_USED_IPV6 = 3,
+    PSI_NET_PRIORITY_IPV6 = 4,
+    PSI_NET_IPV4_BOOTMETHOD = 5,
+    PSI_NET_STATIC_IPV4ADDRESS = 6,
+    PSI_NET_SUBNETMASK = 7,
+    PSI_NET_GATEWAY = 8,
+    PSI_NET_DNS_IPV4_BOOTMETHOD = 9,
+    PSI_NET_PRIMARY_DNS_IPV4ADDRESS = 10,
+    PSI_NET_SECOND_DNS_IPV4ADDRESS = 11,
+    PSI_NET_IPV6_BOOTMETHOD = 12,
+    PSI_NET_STATIC_IPV6ADDRESS = 13,
+    PSI_NET_PRIMARY_DNS_IPV6ADDRESS = 14,
+    PSI_NET_SECOND_DNS_IPV6ADDRESS = 15,
+    PSI_NET_IPV6ADDRESS_LIST = 16,
+    PSI_NET_COMMUNICATION_MODE = 17,
+    PSI_NET_SSID = 18,
+    PSI_NET_CHANNEL = 19,
+    PSI_NET_AUTHENTICATION_METHOD = 20,
+    PSI_NET_ENCRYPTIONMODE = 21,
+    PSI_NET_WEPKEY = 22,
+    PSI_NET_PASSPHRASE = 23,
+    PSI_NET_USER_ID = 24,
+    PSI_NET_PASSWORD = 25,
+    PSI_NET_NODENAME = 26,
+    PSI_WIRELESSDIRECT_KEY_CREATE_MODE = 27,
+    PSI_WIRELESSDIRECT_SSID = 28,
+    PSI_WIRELESSDIRECT_NETWORK_KEY = 29,
+    PSI_BT_ISDISCOVERABLE = 30,
+    PSI_BT_DEVICENAME = 31,
+    PSI_BT_BOOTMODE = 34,
+    PSI_PRINTER_POWEROFFTIME = 35,
+    PSI_PRINTER_POWEROFFTIME_BATTERY = 36,
+    PSI_PRINT_JPEG_HALFTONE = 37,
+    PSI_PRINT_JPEG_SCALE = 38,
+    PSI_PRINT_DENSITY = 39,
+    PSI_PRINT_SPEED = 40,
+    
+    PSI_BT_POWERSAVEMODE = 41,
+    PSI_BT_SSP = 42,
+    PSI_BT_AUTHMODE = 43,
+    PSI_BT_AUTO_CONNECTION = 44,
+} ;
+
+//  Return value
+#define RET_FALSE       0
+#define RET_TRUE        1
+
+//
+
+typedef NS_ENUM(NSUInteger, CONNECTION_TYPE) {
+    CONNECTION_TYPE_WLAN,
+    CONNECTION_TYPE_BLUETOOTH, // Classic Bluetooth
+    CONNECTION_TYPE_BLE, // Bluetooth Low Energy
+    CONNECTION_TYPE_ERROR
+};
+
+typedef NS_ENUM(NSUInteger, BRPtouchPrinterGetPrinterInfoResult) {
+    BRPtouchPrinterGetPrinterInfoResult_SUCCESS = 0,
+    BRPtouchPrinterGetPrinterInfoResult_CONNECTIONERROR = 1,
+    BRPtouchPrinterGetPrinterInfoResult_UNSUPPORT = 2,
+    BRPtouchPrinterGetPrinterInfoResult_UNKNOWN = 3,
+};
+
+typedef unsigned char BRPtouchPrinterInternalModelTypeFlag;
+extern const BRPtouchPrinterInternalModelTypeFlag BRPtouchPrinterInternalModelTypeFlagUnsupported; // Unsupported
+extern const BRPtouchPrinterInternalModelTypeFlag BRPtouchPrinterInternalModelTypeFlagCommunicationFailed; // CommunicationFailed
+
+
+extern NSString *BRWLanConnectBytesWrittenNotification;
+extern NSString *BRBluetoothSessionBytesWrittenNotification;
+extern NSString *BRBLEBytesWrittenNotification;
+extern NSString *BRPtouchPrinterKitMessageNotification;
+
+extern NSString *const BRBytesWrittenKey;
+extern NSString *const BRBytesToWriteKey;
+extern NSString *const BRMessageKey;
+
+
+@interface BRPtouchPrinter : NSObject <NSNetServiceBrowserDelegate,NSNetServiceDelegate>
+
+- (id)initWithPrinterIPAddress:(NSString *)IPAddress;
+- (id)initWithPrinterName:(NSString*)strPrinterName;
+- (id)initWithPrinterName:(NSString*)strPrinterName interface:(CONNECTION_TYPE)type;
+- (NSString *)printerName;
+- (BOOL)setPrinterName:(NSString*)strPrinterName;
+- (void)setPrinterNameFromStatus:(BRPtouchPrinterStatus*)status;
+- (void)setPrintInfo:(BRPtouchPrintInfo*)printInfo;
+- (BOOL)setCustomPaperFile:(NSString*)strFilePath;
+- (NSArray *)setCustomPaperInfoCommand:(BRCustomPaperInfoCommand *)customPaperInfoCommand;
+//- (BOOL)setEncryptKey:(NSString*)strKey keyEx:(NSString*)strKeyEx; // Not Available
+
+- (NSArray *)getSupportPaperArray;
+- (BRPtouchLabelParam *)getCurrentLabelParam;
+
+- (BRPtouchLabelInfoStatus *)getLabelInfoStatus;
+- (int)getPTStatus:(PTSTATUSINFO*)status;
+- (int)getStatus:(BRPtouchPrinterStatus**)status;
+- (int)getStatus:(BRPtouchPrinterStatus**)status errorCode:(int *)errorCode;
+- (NSString *)getModelName;
+- (NSString *)getFirmVersion;
+- (NSString *)getMediaVersion;
+- (NSString *)getMediaFileVersion:(NSString *)filepath;
+- (NSString *)getDeviceSerialNumber;
+- (int)getSystemReport:(NSString* *)report;
+
+- (BOOL)sendTemplateFile:(NSArray*)sendFileArray;
+- (BOOL)sendFirmwareFile:(NSArray*)sendFileArray;
+- (BOOL)sendFirmwareFiles:(NSArray*)sendFileArray;
+
+- (int)sendTemplate:(NSString *)sendtemplateFilePath connectionType:(CONNECTION_TYPE) type;
+- (int)sendDatabase:(NSString *)databaseFilePath;
+
+- (BOOL)startPTTPrint:(int)key encoding:(NSStringEncoding)encoding;
+- (BOOL)replaceText:(NSString *)data;
+- (BOOL)replaceTextIndex:(NSString *)data objectIndex:(int)objIndex;
+- (BOOL)replaceTextName:(NSString *)data objectName:(NSString *)objName;
+- (int)flushPTTPrintWithCopies:(int)nCopy;
+- (int)removeTemplate:(NSArray<NSNumber*> *)keyList;
+- (int)getTemplateList:(NSArray<BRPtouchTemplateInfo*>*__autoreleasing *)templateList;
+
+- (NSArray <NSString *>*)searchAvailableSSID:(int)waitTime;
+
+- (void)setIPAddress:(NSString*)strIP;
+- (void)setupForBluetoothDeviceWithSerialNumber:(NSString*)serialNumber;
+- (void)setBLEAdvertiseLocalName:(NSString*)advertiseLocalName;
+
+/**
+ * Deprecated.
+ * Use startCommunication.
+ **/
+- (int)startPrint __attribute__((deprecated));
+- (BOOL)startCommunication;
+
+/**
+ * Deprecated.
+ * Use endCommunication.
+ **/
+- (void)endPrint __attribute__((deprecated));
+- (void)endCommunication;
+
+- (int)sendFile:(NSString*)filePath;
+- (int)sendData:(NSData*)data;
+- (int)sendFileEx:(NSString*)filePath;
+- (int)sendDataEx:(NSData*)data;
+
+- (int)printPDFAtPath:(NSString *)pdfPath pages:(NSUInteger [])indexes length:(NSUInteger)length copy:(int)nCopy;
+- (int)printImage:(CGImageRef)imageRef copy:(int)nCopy;
+- (int)printImagesWithBlock:(NSArray<ImageCreationBlock> *)imageProcList copy:(int)nCopy;
+- (int)printFiles:(NSArray *)filePaths copy:(int)nCopy;
+
+- (int)cancelPrinting;
+- (void)setInterface:(CONNECTION_TYPE)strInterface;
+
+- (int)getBatteryStatus;
+- (int)getBatteryInfo:(BRPtouchBatteryInfo* *)batteryInfo;
+- (int)getPrinterBootMode;
+- (int) setAutoConnectBluetooth:(BOOL)flag;
+- (int) isAutoConnectBluetooth;
+
+- (int)setPrinterSettings:(NSDictionary*)printerSettings;
+- (int)getPrinterSettings:(NSDictionary**)printerSettings require:(NSArray*)require;
+
+///This api is for Brother applications. We do not recommend you to use it.
+- (BRPtouchPrinterInternalModelTypeFlag)getPrinterInternalModelFlag;
+///This api is for Brother applications. We do not recommend you to use it.
+- (BRPtouchPrinterGetPrinterInfoResult)requestPtouchDeviceDependedDataHeaderList:(NSMutableArray<BRLMPtouchDeviceDependedDataHeader*> **)headers;
+///This api is for Brother applications. We do not recommend you to use it.
+- (BRPtouchPrinterGetPrinterInfoResult)requestBluetoothFirmVersion:(NSString **)version;
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/BRPtouchPrinterData.h

@@ -0,0 +1,16 @@
+//
+//  BRPtouchPrinterData.h
+//  BRPtouchPrinterKit
+//
+//  Copyright (c) 2012-2018 Brother Industries, Ltd. All rights reserved.
+//
+#import <Foundation/Foundation.h>
+
+@interface BRPtouchPrinterData : NSObject
+{
+	NSArray*	aryPrinterList;
+}
+
+- (NSArray*)getPrinterList;
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/BRPtouchPrinterKit.h

@@ -0,0 +1,18 @@
+//
+//  BRPtouchPrinterKit.h
+//  BRPtouchPrinterKit
+//
+//  Copyright (c) 2012-2018 Brother Industries, Ltd. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import <BRLMPrinterKit/BRPtouchPrinter.h>
+#import <BRLMPrinterKit/BRPtouchNetworkManager.h>
+#import <BRLMPrinterKit/BRPtouchBluetoothManager.h>
+#import <BRLMPrinterKit/BRPtouchBLEManager.h>
+#import <BRLMPrinterKit/BRPtouchDeviceInfo.h>
+#import <BRLMPrinterKit/BRPtouchTemplateInfo.h>
+
+@interface BRPtouchPrinterKit : NSObject
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/BRPtouchPrinterStatus.h

@@ -0,0 +1,58 @@
+//
+//  BRPtouchPrinterStatus.h
+//  BRPtouchPrinterKit
+//
+//  Copyright (c) 2016-2018 Brother Industries, Ltd. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+typedef struct _PTSTATUSINFO {
+    Byte	byHead;						// Head mark
+    Byte	bySize;						// Size
+    Byte	byBrotherCode;				// Brother code
+    Byte	bySeriesCode;				// Serial code
+    Byte	byModelCode;				// Model code
+    Byte	byNationCode;				// Nation code
+    Byte	byFiller;					// information about cover
+    Byte	byFiller2;					// Not used
+    Byte	byErrorInf;					// Error information 1
+    Byte	byErrorInf2;				// Error information 2
+    Byte	byMediaWidth;				// Media width
+    Byte	byMediaType;				// Media type
+    Byte	byColorNum;					// The number of colors
+    Byte	byFont;						// Font
+    Byte	byJapanesFont;				// Japanese font
+    Byte	byMode;						// Mode
+    Byte	byDensity;					// Density
+    Byte	byMediaLength;				// Media Length
+    Byte	byStatusType;				// Status Type
+    Byte	byPhaseType;				// Phase type
+    Byte	byPhaseNoHi;				// Upper bytes of phase number
+    Byte	byPhaseNoLow;				// Lower bytes of phase number
+    Byte	byNoticeNo;					// Notice number
+    Byte	byExtByteNum;				// Total bytes of extended part
+    Byte	byLabelColor;				// Color of label
+    Byte	byFontColor;				// Color of font
+    Byte	byHardWareSetting[4];		// Settings of hardware
+    Byte	byNoUse[2];                 // Not Use
+} PTSTATUSINFO, *LPPTSTATUSINFO;
+
+typedef NS_ENUM(NSInteger, BRPtouchPrinterStatusBatteryTernary) {
+    BRPtouchPrinterStatusBatteryTernaryUnknown = -1,
+    BRPtouchPrinterStatusBatteryTernaryYes = 1,
+    BRPtouchPrinterStatusBatteryTernaryNo = 0,
+};
+@interface BRPtouchPrinterStatus : NSObject
+@property (nonatomic) PTSTATUSINFO statusInfo;
+
+// battery
+@property (nonatomic) int32_t batteryResidualQuantityLevel;
+@property (nonatomic) int32_t maxOfBatteryResidualQuantityLevel;
+
+@property (nonatomic) BRPtouchPrinterStatusBatteryTernary isACConnected;
+@property (nonatomic) BRPtouchPrinterStatusBatteryTernary isBatteryMounted;
+
+@property (nonatomic) int16_t batteryLevel __deprecated;
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/BRPtouchTemplateInfo.h

@@ -0,0 +1,23 @@
+//
+//  BRPtouchTemplateInfo.h
+//  BRPtouchPrinterKit
+//
+//  Copyright (c) 2018 Brother Industries, Ltd. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+// 64-bit value representing the number of 100-nanosecond intervals since January 1, 1601.
+typedef unsigned long long int BRFILETIMEDate;
+extern const BRFILETIMEDate NULLOfBRFILETIMEDate;
+
+@interface BRPtouchTemplateInfo : NSObject
+
+@property (nonatomic, readonly) NSUInteger key;
+@property (nonatomic, readonly) NSUInteger fileSize;
+@property (nonatomic, readonly) NSUInteger checksum;
+@property (nonatomic, readonly) NSDate *modifiedDate;
+@property (nonatomic, readonly) BRFILETIMEDate rawModifiedDate;
+@property (nonatomic, readonly) NSString *fileName;
+
+@end

package/ios/Pods/BRLMPrinterKit_v4/BRLMPrinterKit/BRLMPrinterKit.xcframework/ios-arm64_x86_64-simulator/BRLMPrinterKit.framework/Headers/GenericMobileLabelModelPrintSettings.h

@@ -0,0 +1,235 @@
+//
+//  GenericMobileLabelModelPrintSettings.h
+//  BMSPrinterKit
+//
+//  Created by BMS on 9/12/12.
+//  Copyright (c) 2012-13 Brother Mobile Solutions. All rights reserved.
+//
+
+#import <BRLMPrinterKit/PrintSettings.h>
+
+
+
+@interface GenericMobileLabelModelPrintSettings : PrintSettings <PrintSettingsDelegate>
+{
+    // provide subclasses with access to readonly properties via ivars.
+    // Each subclass should set these to their model-specific values, at least if the
+    // generic defaults are not accurate for each model.
+
+    // Because they are readonly, there is no "Setter" method available in the superclass.
+    // The subclasses should be the only place where these properties are set.
+    // But, they will be used in this superclass.
+    // Users of this superclass can read the values if desired, but in most cases this
+    // will not be necessary.
+    int _resolutionHorz;
+    int _resolutionVert;
+    int _headSizeDots;
+    int _paperWidthDotsMin;
+    int _paperWidthDotsMax;
+    int _paperLengthDotsMin;
+    int _paperLengthDotsMax;
+    int _marginLengthDotsMin;
+    int _marginLengthDotsMax;
+    int _extraFeedMax;
+
+    unsigned char _energyRankMax; // min is always 0. Max depends on printer model.
+    // TD-4D and TD2a is +/-5, all others are +/-2 for sensor threshold adjust.
+    signed char _sensThrAdjMin;
+    signed char _sensThrAdjMax;
+    // NOTE: All models are +/-2 for sensor duty adjust, so not adding min/max for that one yet.
+}
+
+// the following are defined somewhat arbitrarily to limit these settings to a
+// reasonable value during validation.
+// NOTE: We do NOT need "read only" properties for these since they will be the same
+// for each model and subclass.
+#define LABELSPACINGDOTS_MAX 1000
+#define MARKWIDTHDOTS_MAX 1000
+#define MARKOFFSETDOTS_MIN -1000
+#define MARKOFFSETDOTS_MAX 1000
+
+
+//*** IMPORTANT (for SDK Users):
+// *** DO NOT INSTANTIATE AN OBJECT OF THIS CLASS!!!!! ***
+// The GenericMobileLabelModelPrintSettings class is essentially an ABSTRACT class.
+// Instead, you should instantiate the model-specific class, e.g. RJ4040PrintSettings.
+
+//*** The following properties should be set by your app code, either PROGRAMMATICALLY
+// or by using one of the PrintSettingsViewControllers (which may not set all properties).
+
+// The properties and methods in this super-class will be COMMON for all
+// of the RJ and TD printer models.
+// They will be implemented in here generically, but will use the genericModelDelegate
+// property above to get model-specific information.
+
+// SDK Users: All of the properties below (and those in the PrintSettings superclass)
+// are settable by you to change the printer behavior.
+// If you are not using the PrintSettingsViewController (either the SDK's or your own custom one),
+// then you should set each of these properties programmatically to your desired setting.
+@property (nonatomic, assign) PAPERTYPE paperType;
+// formFeedMode = NOFEED mode is used to implement "trimTapeAfterData" from Windows driver.
+// This allows clipping white space from the bottom of the job to save paper.
+@property (nonatomic, assign) FORMFEEDMODE formFeedMode;
+@property (nonatomic, assign) DENSITY density;
+@property (nonatomic,assign) int extraFeed; // used with kFormFeedModeNoFeed only
+
+//*** PAPER SIZE is defined by setting ALL of the following properties.
+// They are used to generate the "Esc iUw[128 bytes]" command.
+
+// Paper Size is defined by a Width and Length.
+// Unprintable Margins impact printable area within this defined size.
+// * Printable height will be calculated as:
+//        "printableHeight = paperLengthDots - 2*marginLengthDots"
+// * Printable width will be calculated as:
+//        "printableWidth = paperWidthDots - 2*marginWidthDots"
+// Also, since printer paper is "center justified", anything less than 4" width needs to be
+// compensated for using "rightOffsetBytes" to shift the data relative to printhead origin.
+// We calculate "rightOffsetBytes" in the DRIVER based on paperWidthDots and marginWidthDots.
+//
+// NOTE: RJ4040 requires the left/right margins (marginWidth) to be the same as each other,
+// and it requires top/bottom margins (marginLength) to be the same as each other.
+// Although TD2 firmware allows these to be different, we are NOT going to support that
+// functionality. If any margin settings are needed that require these unprintable margins
+// to be different, then use the "marginDots" property in the superclass to make these adjustments.
+@property (nonatomic, assign) int paperWidthDots;
+@property (nonatomic, assign) int paperLengthDots;
+@property (nonatomic, assign) int16_t marginWidthDots; // left and right unprintable margin
+@property (nonatomic, assign) int16_t marginLengthDots; // top and bottom unprintable margin
+// this is for labels only:
+@property (nonatomic, assign) int16_t labelSpacingDots; // distance between labels
+// These 2 are for Marked Paper only:
+@property (nonatomic, assign) int16_t markWidthDots; // width of mark
+@property (nonatomic, assign) int16_t markOffsetDots; // distance from leading edge to marks. Can be negative.
+
+//*** Advanced Paper Size Adjustments
+// The following properties are also added to Esc iUw (additionalMediaInfo) command.
+// In Windows Driver, these are on "Advanced Printing Adjustments..." when editing a PaperSize.
+//
+// Until now they have been hard-coded to match defaults in Windows driver.
+// In SDK version 2.3.4, we made these available for you to modify if necessary.
+// In SDK version 2.5.1 => v4.3.2, we added (most of) these to the ViewControllers.
+// NOTE: Added new "min/max" read-only properties for these too, in order to allow sub-classes
+// to set their min/max values, based on the specific printer model.
+@property (nonatomic, assign) unsigned char energyRank;  // similar to density.
+                                                // Range is 0-10
+                                                // TD-4550 range is 0-30.
+                                                // RJ-3230B, RJ-3250WB range is 0-20
+                                                // Default depends on printer model and paper type.
+                                                // Set to '\xFF' (-1) to allow SDK to set default, same as SDK versions < v2.3.4.
+
+// NOTE: These are N/A for RJ-4000 series. But they are supported with all other RJ/TD models.
+@property (nonatomic, assign) signed char sensThrAdj;  // range = 0xFE (-2) to 0x02 (2), default = 0
+                                                       // TD-4550 range = 0xFB (-5) to 0x05 (5), default = 0
+@property (nonatomic, assign) signed char sensDutyAdj; // range = 0xFE (-2) to 0x02 (2), default = 0
+
+// TODO NOTE: These 2 horz/vert position adjustments do NOT work. So, IGNORE these for now.
+// It's not clear why these are properties are included in the "Esc iUw[]" data structure,
+// since setting them doesn't change the output. Based on Windows driver behavior, it appears
+// that the DRIVER is expected to modify the print data. If that's the case, then these really
+// do not belong inside the paper definition, in my opinion.
+#ifdef WHAT_THE_SPEC_SAYS
+// This range is small, especially at 300 dpi.
+// And, it doesn't match the size of the field in the struct or the Windows Driver.
+@property (nonatomic, assign) int16_t horzPosAdjDots; // range = 0x80 (-128) to 0x7F (127), default = 0
+@property (nonatomic, assign) int16_t vertPosAdjDots; // range = 0x80 (-128) to 0x7F (127), default = 0
+#else
+// Windows driver allows +/- 5.91 inches at printer resolution.
+// And, the value in Esc iUw structure is a 16-bit signed integer.
+// So, these values in comments seem to be the right ones.
+@property (nonatomic, assign) int16_t horzPosAdjDots; // range = +/- 5.91*resolution, default = 0
+@property (nonatomic, assign) int16_t vertPosAdjDots; // range = +/- 5.91*resolution, default = 0
+#endif
+
+
+// By default, the "Esc iUw [128 bytes]" command  will be sent by computing the 128-byte
+// structure fields from the paperSize and other property settings.
+// However, some types of media may not be adequately handled. In this case, we provide the
+// option to disable sending this command. However, it will then be necessary to use the
+// Windows driver to send a job to the printer to cause the appropriate "Esc iUw" command to
+// be sent to the printer.
+// *** The printer will remember the settings from the last time this command was sent. ***
+// It will be important to assure that this class' property settings closely match the
+// settings sent by the Windows driver.
+@property (nonatomic, assign) BOOL sendAdditionalMediaInfoCommand;
+
+
+// Enable/Disable the FIXED 2 Sec Delay at end of **EACH** page when printing by MFi Bluetooth.
+// SDK v2.3.2 forced this delay for RJ-42 models ONLY, without this configurable property.
+// SDK v2.3.3 added this property to allow you to turn it ON only if needed, for RJ-42 series only.
+// SDK v2.3.4 moved this to Generic class, so it can be used with other models in case it is needed.
+//   * However, we haven't seen the problem occur with any printers other than RJ-4200 series.
+//   * We provide this capability with other models just in case it is helpful.
+//
+// When Enabled:
+//  * A fixed 2-second delay is added at the END OF EACH PAGE, for MFi Bluetooth Channel ONLY.
+//  * This delay seems to fix a problem that occurs with RJ-42 models which can cause MFi to disconnect
+//    when the printer goes into a cooling state while printing multiple page jobs.
+//  * However, the delay is NOT needed in most "normal" conditions, so enabling it can slow you down.
+//    Therefore, the default value is NO (Disabled).
+//
+// When Disabled (default):
+//  * NO 2-sec delay at end of each page, which is normal for all printers released prior to RJ-4200 series.
+//  * However, when printing multiple page jobs on RJ-4200 series, there is a possibility that MFi can be disconnected
+//    by Apple when printer begins "Cooling". This seems to be a FW bug with RJ-42 models only. However, the possibility
+//    exists that other models can have this problem too.
+//
+// Generally, we recommend setting NO unless your "worst case" scenario results in the MFi being disconnected
+// for your printer model. If so, then we suggest giving user a CHOICE to enable/disable this so the delay doesn't
+// occur on every page, unless you are OK with this delay happening every page.
+//
+@property (nonatomic, assign) BOOL coolingDelayEnabled;
+
+//*** The properties below are READ ONLY. SDK Users can NOT set them!!
+// Each subclass MUST set them to their model-specific values in their init method.
+// The purpose of this GenericMobileLabelModelPrintSettings class is to implement COMMON
+// code so it does not have to be duplicated for each similar printer model. However, it
+// requires these model-dependent properties to be set by the SUBCLASS.
+@property (readonly, nonatomic, assign) int resolutionHorz;
+@property (readonly, nonatomic, assign) int resolutionVert;
+@property (readonly, nonatomic, assign) int headSizeDots;
+@property (readonly, nonatomic, assign) int paperWidthDotsMin;
+@property (readonly, nonatomic, assign) int paperWidthDotsMax;
+@property (readonly, nonatomic, assign) int paperLengthDotsMin;
+@property (readonly, nonatomic, assign) int paperLengthDotsMax;
+@property (readonly, nonatomic, assign) int marginLengthDotsMin;
+@property (readonly, nonatomic, assign) int marginLengthDotsMax;
+@property (readonly, nonatomic, assign) int extraFeedMax;
+@property (readonly, nonatomic, assign) unsigned char energyRankMax;
+@property (readonly, nonatomic, assign) signed char sensThrAdjMin;
+@property (readonly, nonatomic, assign) signed char sensThrAdjMax;
+
+
+
+// *** PrintSettingsDelegate protocol
+// All subclasses of PrintSettings are required to implement these methods.
+// validatePrintSettings - This function assures that all properties are in range
+// and that there are no conflicting settings. 
+- (BOOL)validatePrintSettings;
+- (void) loadPreferences;
+- (void) savePreferences;
+//generate strings from CURRENT settings, for convenience.
+// This is part of the PrintSettingsDelegateProtocol too.
+- (NSString *)stringFromCurrentPaperType;
+// NOTE: PaperSize uses combination of internal settings to generate a string, formatted in inches.
+- (NSString *)stringFromCurrentPaperSize;
+- (NSString *)stringFromCurrentFormFeedMode;
+- (NSString *)stringFromCurrentExtraFeed;
+- (NSString *)stringFromCurrentDensity;
+
+
+//*** generate strings from constants, for convenience
+- (NSString *)stringFromPaperType: (PAPERTYPE)paperType;
+// NOTE: paperSize for these models does not have a constant, so you can only use the CURRENT version below.
+- (NSString *)stringFromFormFeedMode: (FORMFEEDMODE)ffmode;
+- (NSString *)stringFromExtraFeed:(int)extraFeed;
+- (NSString *)stringFromDensity: (DENSITY)density;
+
+
+//*** TD23xx function only. Adding here so we don't have to implement in each subclass,
+// and adding to this Generic interface avoids a warning.
+-(NSString *)stringFromResolution:(RESOLUTION)resolution;
+
+-(void)updatePaperInfoFromOldResolution:(RESOLUTION)old
+                        toNewResolution:(RESOLUTION)new;
+
+@end