@propulsionworks/cloudformation 0.0.1 → 0.1.0

package/out/exports/resources.generated/aws-acmpca-certificateauthority.d.ts

@@ -0,0 +1,432 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type ACMPCACertificateAuthority = ResourceDefinitionWithAttributes<"AWS::ACMPCA::CertificateAuthority", ACMPCACertificateAuthorityProps, ACMPCACertificateAuthorityAttribs>;
+/**
+ * Use the `AWS::ACMPCA::CertificateAuthority` resource to create a private CA. Once the CA exists, you can use the `AWS::ACMPCA::Certificate` resource to issue a new CA certificate. Alternatively, you can issue a CA certificate using an on-premises CA, and then use the `AWS::ACMPCA::CertificateAuthorityActivation` resource to import the new CA certificate and activate the CA.
+ *
+ * > Before removing a `AWS::ACMPCA::CertificateAuthority` resource from the CloudFormation stack, disable the affected CA. Otherwise, the action will fail. You can disable the CA by removing its associated `AWS::ACMPCA::CertificateAuthorityActivation` resource from CloudFormation.
+ */
+export type ACMPCACertificateAuthorityProps = {
+    /**
+     * Specifies information to be added to the extension section of the certificate signing request (CSR).
+     */
+    CsrExtensions?: CsrExtensions | undefined;
+    /**
+     * Type of the public key algorithm and size, in bits, of the key pair that your CA creates when it issues a certificate. When you create a subordinate CA, you must use a key algorithm supported by the parent CA.
+     */
+    KeyAlgorithm: string;
+    /**
+     * Specifies a cryptographic key management compliance standard for handling and protecting CA keys.
+     *
+     * Default: FIPS_140_2_LEVEL_3_OR_HIGHER
+     *
+     * > Some AWS Regions don't support the default value. When you create a CA in these Regions, you must use `CCPC_LEVEL_1_OR_HIGHER` for the `KeyStorageSecurityStandard` parameter. If you don't, the operation returns an `InvalidArgsException` with this message: "A certificate authority cannot be created in this region with the specified security standard."
+     * >
+     * > For information about security standard support in different AWS Regions, see [Storage and security compliance of AWS Private CA private keys](https://docs.aws.amazon.com/privateca/latest/userguide/data-protection.html#private-keys) .
+     */
+    KeyStorageSecurityStandard?: string | undefined;
+    /**
+     * Information about the Online Certificate Status Protocol (OCSP) configuration or certificate revocation list (CRL) created and maintained by your private CA.
+     */
+    RevocationConfiguration?: RevocationConfiguration | undefined;
+    /**
+     * Name of the algorithm your private CA uses to sign certificate requests.
+     *
+     * This parameter should not be confused with the `SigningAlgorithm` parameter used to sign certificates when they are issued.
+     */
+    SigningAlgorithm: string;
+    /**
+     * Structure that contains X.500 distinguished name information for your private CA.
+     */
+    Subject: Subject;
+    /**
+     * Key-value pairs that will be attached to the new private CA. You can associate up to 50 tags with a private CA. For information using tags with IAM to manage permissions, see [Controlling Access Using IAM Tags](https://docs.aws.amazon.com/IAM/latest/UserGuide/access_iam-tags.html) .
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * Type of your private CA.
+     */
+    Type: string;
+    /**
+     * Specifies whether the CA issues general-purpose certificates that typically require a revocation mechanism, or short-lived certificates that may optionally omit revocation because they expire quickly. Short-lived certificate validity is limited to seven days.
+     *
+     * The default value is GENERAL_PURPOSE.
+     */
+    UsageMode?: string | undefined;
+};
+export type ACMPCACertificateAuthorityAttribs = {
+    /**
+     * The Amazon Resource Name (ARN) for the private CA that issued the certificate.
+     */
+    Arn: string;
+    /**
+     * The Base64 PEM-encoded certificate signing request (CSR) for your certificate authority certificate.
+     */
+    CertificateSigningRequest: string;
+};
+/**
+ * Provides access information used by the `authorityInfoAccess` and `subjectInfoAccess` extensions described in [RFC 5280](https://docs.aws.amazon.com/https://datatracker.ietf.org/doc/html/rfc5280) .
+ */
+export type AccessDescription = {
+    /**
+     * The location of `AccessDescription` information.
+     */
+    AccessLocation: GeneralName;
+    /**
+     * The type and format of `AccessDescription` information.
+     */
+    AccessMethod: AccessMethod;
+};
+/**
+ * Describes the type and format of extension access. Only one of `CustomObjectIdentifier` or `AccessMethodType` may be provided. Providing both results in `InvalidArgsException` .
+ */
+export type AccessMethod = {
+    /**
+     * Specifies the `AccessMethod` .
+     */
+    AccessMethodType?: string | undefined;
+    /**
+     * An object identifier (OID) specifying the `AccessMethod` . The OID must satisfy the regular expression shown below. For more information, see NIST's definition of [Object Identifier (OID)](https://docs.aws.amazon.com/https://csrc.nist.gov/glossary/term/Object_Identifier) .
+     */
+    CustomObjectIdentifier?: string | undefined;
+};
+/**
+ * Contains configuration information for a certificate revocation list (CRL). Your private certificate authority (CA) creates base CRLs. Delta CRLs are not supported. You can enable CRLs for your new or an existing private CA by setting the *Enabled* parameter to `true` . Your private CA writes CRLs to an S3 bucket that you specify in the *S3BucketName* parameter. You can hide the name of your bucket by specifying a value for the *CustomCname* parameter. Your private CA by default copies the CNAME or the S3 bucket name to the *CRL Distribution Points* extension of each certificate it issues. If you want to configure this default behavior to be something different, you can set the *CrlDistributionPointExtensionConfiguration* parameter. Your S3 bucket policy must give write permission to AWS Private CA.
+ *
+ * AWS Private CA assets that are stored in Amazon S3 can be protected with encryption. For more information, see [Encrypting Your CRLs](https://docs.aws.amazon.com/privateca/latest/userguide/PcaCreateCa.html#crl-encryption) .
+ *
+ * Your private CA uses the value in the *ExpirationInDays* parameter to calculate the *nextUpdate* field in the CRL. The CRL is refreshed prior to a certificate's expiration date or when a certificate is revoked. When a certificate is revoked, it appears in the CRL until the certificate expires, and then in one additional CRL after expiration, and it always appears in the audit report.
+ *
+ * A CRL is typically updated approximately 30 minutes after a certificate is revoked. If for any reason a CRL update fails, AWS Private CA makes further attempts every 15 minutes.
+ *
+ * CRLs contain the following fields:
+ *
+ * - *Version* : The current version number defined in RFC 5280 is V2. The integer value is 0x1.
+ * - *Signature Algorithm* : The name of the algorithm used to sign the CRL.
+ * - *Issuer* : The X.500 distinguished name of your private CA that issued the CRL.
+ * - *Last Update* : The issue date and time of this CRL.
+ * - *Next Update* : The day and time by which the next CRL will be issued.
+ * - *Revoked Certificates* : List of revoked certificates. Each list item contains the following information.
+ *
+ * - *Serial Number* : The serial number, in hexadecimal format, of the revoked certificate.
+ * - *Revocation Date* : Date and time the certificate was revoked.
+ * - *CRL Entry Extensions* : Optional extensions for the CRL entry.
+ *
+ * - *X509v3 CRL Reason Code* : Reason the certificate was revoked.
+ * - *CRL Extensions* : Optional extensions for the CRL.
+ *
+ * - *X509v3 Authority Key Identifier* : Identifies the public key associated with the private key used to sign the certificate.
+ * - *X509v3 CRL Number:* : Decimal sequence number for the CRL.
+ * - *Signature Algorithm* : Algorithm used by your private CA to sign the CRL.
+ * - *Signature Value* : Signature computed over the CRL.
+ *
+ * Certificate revocation lists created by AWS Private CA are DER-encoded. You can use the following OpenSSL command to list a CRL.
+ *
+ * `openssl crl -inform DER -text -in *crl_path* -noout`
+ *
+ * For more information, see [Planning a certificate revocation list (CRL)](https://docs.aws.amazon.com/privateca/latest/userguide/crl-planning.html) in the *AWS Private Certificate Authority User Guide*
+ */
+export type CrlConfiguration = {
+    /**
+     * Configures the default behavior of the CRL Distribution Point extension for certificates issued by your CA. If this field is not provided, then the CRL Distribution Point extension will be present and contain the default CRL URL.
+     */
+    CrlDistributionPointExtensionConfiguration?: CrlDistributionPointExtensionConfiguration | undefined;
+    /**
+     * Specifies the type of CRL. This setting determines the maximum number of certificates that the certificate authority can issue and revoke. For more information, see [AWS Private CA quotas](https://docs.aws.amazon.com/general/latest/gr/pca.html#limits_pca) .
+     *
+     * - `COMPLETE` - The default setting. AWS Private CA maintains a single CRL file for all unexpired certificates issued by a CA that have been revoked for any reason. Each certificate that AWS Private CA issues is bound to a specific CRL through the CRL distribution point (CDP) defined in [RFC 5280](https://docs.aws.amazon.com/https://datatracker.ietf.org/doc/html/rfc5280) .
+     * - `PARTITIONED` - Compared to complete CRLs, partitioned CRLs dramatically increase the number of certificates your private CA can issue.
+     *
+     * > When using partitioned CRLs, you must validate that the CRL's associated issuing distribution point (IDP) URI matches the certificate's CDP URI to ensure the right CRL has been fetched. AWS Private CA marks the IDP extension as critical, which your client must be able to process.
+     */
+    CrlType?: string | undefined;
+    /**
+     * Name inserted into the certificate *CRL Distribution Points* extension that enables the use of an alias for the CRL distribution point. Use this value if you don't want the name of your S3 bucket to be public.
+     *
+     * > The content of a Canonical Name (CNAME) record must conform to [RFC2396](https://docs.aws.amazon.com/https://www.ietf.org/rfc/rfc2396.txt) restrictions on the use of special characters in URIs. Additionally, the value of the CNAME must not include a protocol prefix such as "http://" or "https://".
+     */
+    CustomCname?: string | undefined;
+    /**
+     * Designates a custom file path in S3 for CRL(s). For example, `http://<CustomName>/<CustomPath>/<CrlPartition_GUID>.crl` .
+     */
+    CustomPath?: string | undefined;
+    /**
+     * Boolean value that specifies whether certificate revocation lists (CRLs) are enabled. You can use this value to enable certificate revocation for a new CA when you call the `CreateCertificateAuthority` operation or for an existing CA when you call the `UpdateCertificateAuthority` operation.
+     */
+    Enabled: boolean;
+    /**
+     * Validity period of the CRL in days.
+     */
+    ExpirationInDays?: number | undefined;
+    /**
+     * Name of the S3 bucket that contains the CRL. If you do not provide a value for the *CustomCname* argument, the name of your S3 bucket is placed into the *CRL Distribution Points* extension of the issued certificate. You can change the name of your bucket by calling the [UpdateCertificateAuthority](https://docs.aws.amazon.com/privateca/latest/APIReference/API_UpdateCertificateAuthority.html) operation. You must specify a [bucket policy](https://docs.aws.amazon.com/privateca/latest/userguide/PcaCreateCa.html#s3-policies) that allows AWS Private CA to write the CRL to your bucket.
+     *
+     * > The `S3BucketName` parameter must conform to the [S3 bucket naming rules](https://docs.aws.amazon.com/AmazonS3/latest/userguide/bucketnamingrules.html) .
+     */
+    S3BucketName?: string | undefined;
+    /**
+     * Determines whether the CRL will be publicly readable or privately held in the CRL Amazon S3 bucket. If you choose PUBLIC_READ, the CRL will be accessible over the public internet. If you choose BUCKET_OWNER_FULL_CONTROL, only the owner of the CRL S3 bucket can access the CRL, and your PKI clients may need an alternative method of access.
+     *
+     * If no value is specified, the default is PUBLIC_READ.
+     *
+     * *Note:* This default can cause CA creation to fail in some circumstances. If you have have enabled the Block Public Access (BPA) feature in your S3 account, then you must specify the value of this parameter as `BUCKET_OWNER_FULL_CONTROL` , and not doing so results in an error. If you have disabled BPA in S3, then you can specify either `BUCKET_OWNER_FULL_CONTROL` or `PUBLIC_READ` as the value.
+     *
+     * For more information, see [Blocking public access to the S3 bucket](https://docs.aws.amazon.com/privateca/latest/userguide/PcaCreateCa.html#s3-bpa) .
+     */
+    S3ObjectAcl?: string | undefined;
+};
+/**
+ * Contains configuration information for the default behavior of the CRL Distribution Point (CDP) extension in certificates issued by your CA. This extension contains a link to download the CRL, so you can check whether a certificate has been revoked. To choose whether you want this extension omitted or not in certificates issued by your CA, you can set the *OmitExtension* parameter.
+ */
+export type CrlDistributionPointExtensionConfiguration = {
+    /**
+     * Configures whether the CRL Distribution Point extension should be populated with the default URL to the CRL. If set to `true` , then the CDP extension will not be present in any certificates issued by that CA unless otherwise specified through CSR or API passthrough.
+     *
+     * > Only set this if you have another way to distribute the CRL Distribution Points for certificates issued by your CA, such as the Matter Distributed Compliance Ledger.
+     * >
+     * > This configuration cannot be enabled with a custom CNAME set.
+     */
+    OmitExtension: boolean;
+};
+/**
+ * Describes the certificate extensions to be added to the certificate signing request (CSR).
+ */
+export type CsrExtensions = {
+    /**
+     * Indicates the purpose of the certificate and of the key contained in the certificate.
+     */
+    KeyUsage?: KeyUsage | undefined;
+    /**
+     * For CA certificates, provides a path to additional information pertaining to the CA, such as revocation and policy. For more information, see [Subject Information Access](https://docs.aws.amazon.com/https://datatracker.ietf.org/doc/html/rfc5280#section-4.2.2.2) in RFC 5280.
+     */
+    SubjectInformationAccess?: AccessDescription[] | undefined;
+};
+/**
+ * Defines the X.500 relative distinguished name (RDN).
+ */
+export type CustomAttribute = {
+    /**
+     * Specifies the object identifier (OID) of the attribute type of the relative distinguished name (RDN).
+     */
+    ObjectIdentifier: string;
+    /**
+     * Specifies the attribute value of relative distinguished name (RDN).
+     */
+    Value: string;
+};
+/**
+ * Describes an Electronic Data Interchange (EDI) entity as described in as defined in [Subject Alternative Name](https://docs.aws.amazon.com/https://datatracker.ietf.org/doc/html/rfc5280) in RFC 5280.
+ */
+export type EdiPartyName = {
+    /**
+     * Specifies the name assigner.
+     */
+    NameAssigner?: string | undefined;
+    /**
+     * Specifies the party name.
+     */
+    PartyName: string;
+};
+/**
+ * Describes an ASN.1 X.400 `GeneralName` as defined in [RFC 5280](https://docs.aws.amazon.com/https://datatracker.ietf.org/doc/html/rfc5280) . Only one of the following naming options should be provided. Providing more than one option results in an `InvalidArgsException` error.
+ */
+export type GeneralName = {
+    /**
+     * Contains information about the certificate subject. The certificate can be one issued by your private certificate authority (CA) or it can be your private CA certificate. The Subject field in the certificate identifies the entity that owns or controls the public key in the certificate. The entity can be a user, computer, device, or service. The Subject must contain an X.500 distinguished name (DN). A DN is a sequence of relative distinguished names (RDNs). The RDNs are separated by commas in the certificate. The DN must be unique for each entity, but your private CA can issue more than one certificate with the same DN to the same entity.
+     */
+    DirectoryName?: Subject | undefined;
+    /**
+     * Represents `GeneralName` as a DNS name.
+     */
+    DnsName?: string | undefined;
+    /**
+     * Represents `GeneralName` as an `EdiPartyName` object.
+     */
+    EdiPartyName?: EdiPartyName | undefined;
+    /**
+     * Represents `GeneralName` as an IPv4 or IPv6 address.
+     */
+    IpAddress?: string | undefined;
+    /**
+     * Represents `GeneralName` using an `OtherName` object.
+     */
+    OtherName?: OtherName | undefined;
+    /**
+     * Represents `GeneralName` as an object identifier (OID).
+     */
+    RegisteredId?: string | undefined;
+    /**
+     * Represents `GeneralName` as an [RFC 822](https://docs.aws.amazon.com/https://datatracker.ietf.org/doc/html/rfc822) email address.
+     */
+    Rfc822Name?: string | undefined;
+    /**
+     * Represents `GeneralName` as a URI.
+     */
+    UniformResourceIdentifier?: string | undefined;
+};
+/**
+ * Defines one or more purposes for which the key contained in the certificate can be used. Default value for each option is false.
+ */
+export type KeyUsage = {
+    /**
+     * Key can be used to sign CRLs.
+     * @default false
+     */
+    CRLSign?: boolean | undefined;
+    /**
+     * Key can be used to decipher data.
+     * @default false
+     */
+    DataEncipherment?: boolean | undefined;
+    /**
+     * Key can be used only to decipher data.
+     * @default false
+     */
+    DecipherOnly?: boolean | undefined;
+    /**
+     * Key can be used for digital signing.
+     * @default false
+     */
+    DigitalSignature?: boolean | undefined;
+    /**
+     * Key can be used only to encipher data.
+     * @default false
+     */
+    EncipherOnly?: boolean | undefined;
+    /**
+     * Key can be used in a key-agreement protocol.
+     * @default false
+     */
+    KeyAgreement?: boolean | undefined;
+    /**
+     * Key can be used to sign certificates.
+     * @default false
+     */
+    KeyCertSign?: boolean | undefined;
+    /**
+     * Key can be used to encipher data.
+     * @default false
+     */
+    KeyEncipherment?: boolean | undefined;
+    /**
+     * Key can be used for non-repudiation.
+     * @default false
+     */
+    NonRepudiation?: boolean | undefined;
+};
+/**
+ * Contains information to enable and configure Online Certificate Status Protocol (OCSP) for validating certificate revocation status.
+ */
+export type OcspConfiguration = {
+    /**
+     * Flag enabling use of the Online Certificate Status Protocol (OCSP) for validating certificate revocation status.
+     */
+    Enabled: boolean;
+    /**
+     * By default, AWS Private CA injects an Amazon domain into certificates being validated by the Online Certificate Status Protocol (OCSP). A customer can alternatively use this object to define a CNAME specifying a customized OCSP domain.
+     *
+     * > The content of a Canonical Name (CNAME) record must conform to [RFC2396](https://docs.aws.amazon.com/https://www.ietf.org/rfc/rfc2396.txt) restrictions on the use of special characters in URIs. Additionally, the value of the CNAME must not include a protocol prefix such as "http://" or "https://".
+     */
+    OcspCustomCname?: string | undefined;
+};
+/**
+ * Defines a custom ASN.1 X.400 `GeneralName` using an object identifier (OID) and value. The OID must satisfy the regular expression shown below. For more information, see NIST's definition of [Object Identifier (OID)](https://docs.aws.amazon.com/https://csrc.nist.gov/glossary/term/Object_Identifier) .
+ */
+export type OtherName = {
+    /**
+     * Specifies an OID.
+     */
+    TypeId: string;
+    /**
+     * Specifies an OID value.
+     */
+    Value: string;
+};
+/**
+ * Certificate revocation information used by the [CreateCertificateAuthority](https://docs.aws.amazon.com/privateca/latest/APIReference/API_CreateCertificateAuthority.html) and [UpdateCertificateAuthority](https://docs.aws.amazon.com/privateca/latest/APIReference/API_UpdateCertificateAuthority.html) actions. Your private certificate authority (CA) can configure Online Certificate Status Protocol (OCSP) support and/or maintain a certificate revocation list (CRL). OCSP returns validation information about certificates as requested by clients, and a CRL contains an updated list of certificates revoked by your CA. For more information, see [RevokeCertificate](https://docs.aws.amazon.com/privateca/latest/APIReference/API_RevokeCertificate.html) in the *AWS Private CA API Reference* and [Setting up a certificate revocation method](https://docs.aws.amazon.com/privateca/latest/userguide/revocation-setup.html) in the *AWS Private CA User Guide* .
+ *
+ * The following requirements and constraints apply to revocation configurations.
+ *
+ * - A configuration disabling CRLs or OCSP must contain only the `Enabled=False` parameter, and will fail if other parameters such as `CustomCname` or `ExpirationInDays` are included.
+ * - In a CRL configuration, the `S3BucketName` parameter must conform to the [Amazon S3 bucket naming rules](https://docs.aws.amazon.com/AmazonS3/latest/userguide/bucketnamingrules.html) .
+ * - A configuration containing a custom Canonical Name (CNAME) parameter for CRLs or OCSP must conform to [RFC2396](https://docs.aws.amazon.com/https://www.ietf.org/rfc/rfc2396.txt) restrictions on the use of special characters in a CNAME.
+ * - In a CRL or OCSP configuration, the value of a CNAME parameter must not include a protocol prefix such as "http://" or "https://".
+ * - To revoke a certificate, delete the resource from your template, and call the AWS Private CA [RevokeCertificate](https://docs.aws.amazon.com/privateca/latest/APIReference/API_RevokeCertificate.html) API and specify the resource's certificate authority ARN.
+ */
+export type RevocationConfiguration = {
+    /**
+     * Configuration of the certificate revocation list (CRL), if any, maintained by your private CA.
+     */
+    CrlConfiguration?: CrlConfiguration | undefined;
+    /**
+     * Configuration of Online Certificate Status Protocol (OCSP) support, if any, maintained by your private CA.
+     */
+    OcspConfiguration?: OcspConfiguration | undefined;
+};
+/**
+ * ASN1 subject for the certificate authority.
+ */
+export type Subject = {
+    /**
+     * Fully qualified domain name (FQDN) associated with the certificate subject.
+     */
+    CommonName?: string | undefined;
+    /**
+     * Two-digit code that specifies the country in which the certificate subject located.
+     */
+    Country?: string | undefined;
+    /**
+     * Contains a sequence of one or more X.500 relative distinguished names (RDNs), each of which consists of an object identifier (OID) and a value. For more information, see NIST’s definition of [Object Identifier (OID)](https://docs.aws.amazon.com/https://csrc.nist.gov/glossary/term/Object_Identifier) .
+     *
+     * > Custom attributes cannot be used in combination with standard attributes.
+     */
+    CustomAttributes?: CustomAttribute[] | undefined;
+    /**
+     * Disambiguating information for the certificate subject.
+     */
+    DistinguishedNameQualifier?: string | undefined;
+    /**
+     * Typically a qualifier appended to the name of an individual. Examples include Jr. for junior, Sr. for senior, and III for third.
+     */
+    GenerationQualifier?: string | undefined;
+    /**
+     * First name.
+     */
+    GivenName?: string | undefined;
+    /**
+     * Concatenation that typically contains the first letter of the GivenName, the first letter of the middle name if one exists, and the first letter of the SurName.
+     */
+    Initials?: string | undefined;
+    /**
+     * The locality (such as a city or town) in which the certificate subject is located.
+     */
+    Locality?: string | undefined;
+    /**
+     * Legal name of the organization with which the certificate subject is affiliated.
+     */
+    Organization?: string | undefined;
+    /**
+     * A subdivision or unit of the organization (such as sales or finance) with which the certificate subject is affiliated.
+     */
+    OrganizationalUnit?: string | undefined;
+    /**
+     * Typically a shortened version of a longer GivenName. For example, Jonathan is often shortened to John. Elizabeth is often shortened to Beth, Liz, or Eliza.
+     */
+    Pseudonym?: string | undefined;
+    /**
+     * The certificate serial number.
+     */
+    SerialNumber?: string | undefined;
+    /**
+     * State in which the subject of the certificate is located.
+     */
+    State?: string | undefined;
+    /**
+     * Family name.
+     */
+    Surname?: string | undefined;
+    /**
+     * A personal title such as Mr.
+     */
+    Title?: string | undefined;
+};
+//# sourceMappingURL=aws-acmpca-certificateauthority.d.ts.map

package/out/exports/resources.generated/aws-acmpca-certificateauthorityactivation.d.ts

@@ -0,0 +1,30 @@
+import type { ResourceDefinitionWithAttributes } from "../main.ts";
+export type ACMPCACertificateAuthorityActivation = ResourceDefinitionWithAttributes<"AWS::ACMPCA::CertificateAuthorityActivation", ACMPCACertificateAuthorityActivationProps, ACMPCACertificateAuthorityActivationAttribs>;
+/**
+ * The `AWS::ACMPCA::CertificateAuthorityActivation` resource creates and installs a CA certificate on a CA. If no status is specified, the `AWS::ACMPCA::CertificateAuthorityActivation` resource status defaults to ACTIVE. Once the CA has a CA certificate installed, you can use the resource to toggle the CA status field between `ACTIVE` and `DISABLED` .
+ */
+export type ACMPCACertificateAuthorityActivationProps = {
+    /**
+     * The Base64 PEM-encoded certificate authority certificate.
+     */
+    Certificate: string;
+    /**
+     * The Amazon Resource Name (ARN) of your private CA.
+     */
+    CertificateAuthorityArn: string;
+    /**
+     * The Base64 PEM-encoded certificate chain that chains up to the root CA certificate that you used to sign your private CA certificate.
+     */
+    CertificateChain?: string | undefined;
+    /**
+     * Status of your private CA.
+     */
+    Status?: string | undefined;
+};
+export type ACMPCACertificateAuthorityActivationAttribs = {
+    /**
+     * The complete Base64 PEM-encoded certificate chain, including the certificate authority certificate.
+     */
+    CompleteCertificateChain: string;
+};
+//# sourceMappingURL=aws-acmpca-certificateauthorityactivation.d.ts.map

package/out/exports/resources.generated/aws-acmpca-permission.d.ts

@@ -0,0 +1,30 @@
+import type { ResourceDefinition } from "../main.ts";
+export type ACMPCAPermission = ResourceDefinition<"AWS::ACMPCA::Permission", ACMPCAPermissionProps>;
+/**
+ * Grants permissions to the AWS Certificate Manager ( ACM ) service principal ( `acm.amazonaws.com` ) to perform [IssueCertificate](https://docs.aws.amazon.com/privateca/latest/APIReference/API_IssueCertificate.html) , [GetCertificate](https://docs.aws.amazon.com/privateca/latest/APIReference/API_GetCertificate.html) , and [ListPermissions](https://docs.aws.amazon.com/privateca/latest/APIReference/API_ListPermissions.html) actions on a CA. These actions are needed for the ACM principal to renew private PKI certificates requested through ACM and residing in the same AWS account as the CA.
+ *
+ * **About permissions** - If the private CA and the certificates it issues reside in the same account, you can use `AWS::ACMPCA::Permission` to grant permissions for ACM to carry out automatic certificate renewals.
+ * - For automatic certificate renewal to succeed, the ACM service principal needs permissions to create, retrieve, and list permissions.
+ * - If the private CA and the ACM certificates reside in different accounts, then permissions cannot be used to enable automatic renewals. Instead, the ACM certificate owner must set up a resource-based policy to enable cross-account issuance and renewals. For more information, see [Using a Resource Based Policy with AWS Private CA](https://docs.aws.amazon.com/privateca/latest/userguide/pca-rbp.html) .
+ *
+ * > To update an `AWS::ACMPCA::Permission` resource, you must first delete the existing permission resource from the CloudFormation stack and then create a new permission resource with updated properties.
+ */
+export type ACMPCAPermissionProps = {
+    /**
+     * The private CA actions that can be performed by the designated AWS service. Supported actions are `IssueCertificate` , `GetCertificate` , and `ListPermissions` .
+     */
+    Actions: string[];
+    /**
+     * The Amazon Resource Number (ARN) of the private CA from which the permission was issued.
+     */
+    CertificateAuthorityArn: string;
+    /**
+     * The AWS service or entity that holds the permission. At this time, the only valid principal is `acm.amazonaws.com` .
+     */
+    Principal: string;
+    /**
+     * The ID of the account that assigned the permission.
+     */
+    SourceAccount?: string | undefined;
+};
+//# sourceMappingURL=aws-acmpca-permission.d.ts.map