@propulsionworks/cloudformation 0.0.1 → 0.1.0

package/out/exports/resources.generated/aws-appflow-flow.d.ts

@@ -0,0 +1,1067 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type AppFlowFlow = ResourceDefinitionWithAttributes<"AWS::AppFlow::Flow", AppFlowFlowProps, AppFlowFlowAttribs>;
+/**
+ * The `AWS::AppFlow::Flow` resource is an Amazon AppFlow resource type that specifies a new flow.
+ *
+ * > If you want to use AWS CloudFormation to create a connector profile for connectors that implement OAuth (such as Salesforce, Slack, Zendesk, and Google Analytics), you must fetch the access and refresh tokens. You can do this by implementing your own UI for OAuth, or by retrieving the tokens from elsewhere. Alternatively, you can use the Amazon AppFlow console to create the connector profile, and then use that connector profile in the flow creation CloudFormation template.
+ */
+export type AppFlowFlowProps = {
+    /**
+     * A user-entered description of the flow.
+     * @maxLength 2048
+     * @pattern [\w!@#\-.?,\s]*
+     */
+    Description?: string | undefined;
+    /**
+     * The configuration that controls how Amazon AppFlow places data in the destination connector.
+     */
+    DestinationFlowConfigList: DestinationFlowConfig[];
+    /**
+     * The specified name of the flow. Spaces are not allowed. Use underscores (_) or hyphens (-) only.
+     * @minLength 1
+     * @maxLength 256
+     * @pattern [a-zA-Z0-9][\w!@#.-]+
+     */
+    FlowName: string;
+    /**
+     * Sets the status of the flow. You can specify one of the following values:
+     *
+     * - **Active** - The flow runs based on the trigger settings that you defined. Active scheduled flows run as scheduled, and active event-triggered flows run when the specified change event occurs. However, active on-demand flows run only when you manually start them by using Amazon AppFlow.
+     * - **Suspended** - You can use this option to deactivate an active flow. Scheduled and event-triggered flows will cease to run until you reactive them. This value only affects scheduled and event-triggered flows. It has no effect for on-demand flows.
+     *
+     * If you omit the FlowStatus parameter, Amazon AppFlow creates the flow with a default status. The default status for on-demand flows is Active. The default status for scheduled and event-triggered flows is Draft, which means they’re not yet active.
+     */
+    FlowStatus?: "Active" | "Suspended" | "Draft" | undefined;
+    /**
+     * The ARN (Amazon Resource Name) of the Key Management Service (KMS) key you provide for encryption. This is required if you do not want to use the Amazon AppFlow-managed KMS key. If you don't provide anything here, Amazon AppFlow uses the Amazon AppFlow-managed KMS key.
+     * @minLength 20
+     * @maxLength 2048
+     * @pattern arn:aws:kms:.*:[0-9]+:.*
+     */
+    KMSArn?: string | undefined;
+    /**
+     * Specifies the configuration that Amazon AppFlow uses when it catalogs your data. When Amazon AppFlow catalogs your data, it stores metadata in a data catalog.
+     */
+    MetadataCatalogConfig?: MetadataCatalogConfig | undefined;
+    /**
+     * Contains information about the configuration of the source connector used in the flow.
+     */
+    SourceFlowConfig: SourceFlowConfig;
+    /**
+     * The tags used to organize, track, or control access for your flow.
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * A list of tasks that Amazon AppFlow performs while transferring the data in the flow run.
+     */
+    Tasks: Task[];
+    /**
+     * The trigger settings that determine how and when Amazon AppFlow runs the specified flow.
+     */
+    TriggerConfig: TriggerConfig;
+};
+export type AppFlowFlowAttribs = {
+    /**
+     * The flow's Amazon Resource Name (ARN).
+     * @maxLength 512
+     * @pattern arn:aws:appflow:.*:[0-9]+:.*
+     */
+    FlowArn: string;
+};
+/**
+ * The aggregation settings that you can use to customize the output format of your flow data.
+ */
+export type AggregationConfig = {
+    /**
+     * Specifies whether Amazon AppFlow aggregates the flow records into a single file, or leave them unaggregated.
+     */
+    AggregationType?: AggregationType | undefined;
+    /**
+     * The desired file size, in MB, for each output file that Amazon AppFlow writes to the flow destination. For each file, Amazon AppFlow attempts to achieve the size that you specify. The actual file sizes might differ from this target based on the number and size of the records that each file contains.
+     */
+    TargetFileSize?: number | undefined;
+};
+export type AggregationType = "None" | "SingleFile";
+export type AmplitudeConnectorOperator = "BETWEEN";
+/**
+ * The properties that are applied when Amplitude is being used as a source.
+ */
+export type AmplitudeSourceProperties = {
+    /**
+     * The object specified in the Amplitude flow source.
+     */
+    Object: string;
+};
+/**
+ * The operation to be performed on the provided source fields.
+ */
+export type ConnectorOperator = {
+    /**
+     * The operation to be performed on the provided Amplitude source fields.
+     */
+    Amplitude?: AmplitudeConnectorOperator | undefined;
+    /**
+     * Operators supported by the custom connector.
+     */
+    CustomConnector?: Operator | undefined;
+    /**
+     * The operation to be performed on the provided Datadog source fields.
+     */
+    Datadog?: DatadogConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Dynatrace source fields.
+     */
+    Dynatrace?: DynatraceConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Google Analytics source fields.
+     */
+    GoogleAnalytics?: GoogleAnalyticsConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Infor Nexus source fields.
+     */
+    InforNexus?: InforNexusConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Marketo source fields.
+     */
+    Marketo?: MarketoConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Salesforce Pardot source fields.
+     */
+    Pardot?: PardotConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Amazon S3 source fields.
+     */
+    S3?: S3ConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided SAPOData source fields.
+     */
+    SAPOData?: SAPODataConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Salesforce source fields.
+     */
+    Salesforce?: SalesforceConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided ServiceNow source fields.
+     */
+    ServiceNow?: ServiceNowConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Singular source fields.
+     */
+    Singular?: SingularConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Slack source fields.
+     */
+    Slack?: SlackConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Trend Micro source fields.
+     */
+    Trendmicro?: TrendmicroConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Veeva source fields.
+     */
+    Veeva?: VeevaConnectorOperator | undefined;
+    /**
+     * The operation to be performed on the provided Zendesk source fields.
+     */
+    Zendesk?: ZendeskConnectorOperator | undefined;
+};
+export type ConnectorType = "SAPOData" | "Salesforce" | "Pardot" | "Singular" | "Slack" | "Redshift" | "S3" | "Marketo" | "Googleanalytics" | "Zendesk" | "Servicenow" | "Datadog" | "Trendmicro" | "Snowflake" | "Dynatrace" | "Infornexus" | "Amplitude" | "Veeva" | "CustomConnector" | "EventBridge" | "Upsolver" | "LookoutMetrics";
+/**
+ * The properties that are applied when the custom connector is being used as a destination.
+ */
+export type CustomConnectorDestinationProperties = {
+    /**
+     * The custom properties that are specific to the connector when it's used as a destination in the flow.
+     */
+    CustomProperties?: Record<string, string> | undefined;
+    /**
+     * The entity specified in the custom connector as a destination in the flow.
+     */
+    EntityName: string;
+    /**
+     * The settings that determine how Amazon AppFlow handles an error when placing data in the custom connector as destination.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * The name of the field that Amazon AppFlow uses as an ID when performing a write operation such as update, delete, or upsert.
+     */
+    IdFieldNames?: string[] | undefined;
+    /**
+     * Specifies the type of write operation to be performed in the custom connector when it's used as destination.
+     */
+    WriteOperationType?: WriteOperationType | undefined;
+};
+/**
+ * The properties that are applied when the custom connector is being used as a source.
+ */
+export type CustomConnectorSourceProperties = {
+    /**
+     * Custom properties that are required to use the custom connector as a source.
+     */
+    CustomProperties?: Record<string, string> | undefined;
+    /**
+     * The API of the connector application that Amazon AppFlow uses to transfer your data.
+     */
+    DataTransferApi?: {
+        /**
+         * @maxLength 64
+         * @pattern [\w/-]+
+         */
+        Name: string;
+        Type: "SYNC" | "ASYNC" | "AUTOMATIC";
+    } | undefined;
+    /**
+     * The entity specified in the custom connector as a source in the flow.
+     */
+    EntityName: string;
+};
+/**
+ * The API of the connector application that Amazon AppFlow uses to transfer your data.
+ */
+export type DataTransferApi = "AUTOMATIC" | "BULKV2" | "REST_SYNC";
+export type DatadogConnectorOperator = "PROJECTION" | "BETWEEN" | "EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Datadog is being used as a source.
+ */
+export type DatadogSourceProperties = {
+    /**
+     * The object specified in the Datadog flow source.
+     */
+    Object: string;
+};
+/**
+ * This stores the information that is required to query a particular connector.
+ */
+export type DestinationConnectorProperties = {
+    /**
+     * The properties that are required to query the custom Connector.
+     */
+    CustomConnector?: CustomConnectorDestinationProperties | undefined;
+    /**
+     * The properties required to query Amazon EventBridge.
+     */
+    EventBridge?: EventBridgeDestinationProperties | undefined;
+    /**
+     * The properties required to query Amazon Lookout for Metrics.
+     */
+    LookoutMetrics?: LookoutMetricsDestinationProperties | undefined;
+    /**
+     * The properties required to query Marketo.
+     */
+    Marketo?: MarketoDestinationProperties | undefined;
+    /**
+     * The properties required to query Amazon Redshift.
+     */
+    Redshift?: RedshiftDestinationProperties | undefined;
+    /**
+     * The properties required to query Amazon S3.
+     */
+    S3?: S3DestinationProperties | undefined;
+    /**
+     * The properties required to query SAPOData.
+     */
+    SAPOData?: SAPODataDestinationProperties | undefined;
+    /**
+     * The properties required to query Salesforce.
+     */
+    Salesforce?: SalesforceDestinationProperties | undefined;
+    /**
+     * The properties required to query Snowflake.
+     */
+    Snowflake?: SnowflakeDestinationProperties | undefined;
+    /**
+     * The properties required to query Upsolver.
+     */
+    Upsolver?: UpsolverDestinationProperties | undefined;
+    /**
+     * The properties required to query Zendesk.
+     */
+    Zendesk?: ZendeskDestinationProperties | undefined;
+};
+/**
+ * Contains information about the configuration of destination connectors present in the flow.
+ */
+export type DestinationFlowConfig = {
+    /**
+     * The API version that the destination connector uses.
+     */
+    ApiVersion?: string | undefined;
+    /**
+     * The name of the connector profile. This name must be unique for each connector profile in the AWS account .
+     */
+    ConnectorProfileName?: string | undefined;
+    /**
+     * The type of destination connector, such as Sales force, Amazon S3, and so on.
+     */
+    ConnectorType: ConnectorType;
+    /**
+     * This stores the information that is required to query a particular connector.
+     */
+    DestinationConnectorProperties: DestinationConnectorProperties;
+};
+export type DynatraceConnectorOperator = "PROJECTION" | "BETWEEN" | "EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Dynatrace is being used as a source.
+ */
+export type DynatraceSourceProperties = {
+    /**
+     * The object specified in the Dynatrace flow source.
+     */
+    Object: string;
+};
+/**
+ * The settings that determine how Amazon AppFlow handles an error when placing data in the destination. For example, this setting would determine if the flow should fail after one insertion error, or continue and attempt to insert every record regardless of the initial failure. `ErrorHandlingConfig` is a part of the destination connector details.
+ */
+export type ErrorHandlingConfig = {
+    /**
+     * Specifies the name of the Amazon S3 bucket.
+     */
+    BucketName?: string | undefined;
+    /**
+     * Specifies the Amazon S3 bucket prefix.
+     */
+    BucketPrefix?: string | undefined;
+    /**
+     * Specifies if the flow should fail after the first instance of a failure when attempting to place data in the destination.
+     */
+    FailOnFirstError?: boolean | undefined;
+};
+/**
+ * The properties that are applied when Amazon EventBridge is being used as a destination.
+ */
+export type EventBridgeDestinationProperties = {
+    /**
+     * The object specified in the Amplitude flow source.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * The object specified in the Amazon EventBridge flow destination.
+     */
+    Object: string;
+};
+export type FileType = "CSV" | "JSON" | "PARQUET";
+/**
+ * Trigger settings of the flow.
+ */
+export type GlueDataCatalog = {
+    /**
+     * A string containing the value for the tag
+     * @minLength 0
+     * @maxLength 255
+     * @pattern [\u0020-\uD7FF\uE000-\uFFFD\uD800\uDC00-\uDBFF\uDFFF\t]*
+     */
+    DatabaseName: string;
+    /**
+     * A string containing the value for the tag
+     * @minLength 0
+     * @maxLength 512
+     * @pattern arn:aws:iam:.*:[0-9]+:.*
+     */
+    RoleArn: string;
+    /**
+     * A string containing the value for the tag
+     * @minLength 0
+     * @maxLength 128
+     * @pattern [\u0020-\uD7FF\uE000-\uFFFD\uD800\uDC00-\uDBFF\uDFFF\t]*
+     */
+    TablePrefix: string;
+};
+export type GoogleAnalyticsConnectorOperator = "PROJECTION" | "BETWEEN";
+/**
+ * The properties that are applied when Google Analytics is being used as a source.
+ */
+export type GoogleAnalyticsSourceProperties = {
+    /**
+     * The object specified in the Google Analytics flow source.
+     */
+    Object: string;
+};
+/**
+ * Specifies the configuration used when importing incremental records from the source.
+ */
+export type IncrementalPullConfig = {
+    /**
+     * A field that specifies the date time or timestamp field as the criteria to use when importing incremental records from the source.
+     */
+    DatetimeTypeFieldName?: string | undefined;
+};
+export type InforNexusConnectorOperator = "PROJECTION" | "BETWEEN" | "EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Infor Nexus is being used as a source.
+ */
+export type InforNexusSourceProperties = {
+    /**
+     * The object specified in the Infor Nexus flow source.
+     */
+    Object: string;
+};
+/**
+ * The properties that are applied when Amazon Lookout for Metrics is used as a destination.
+ */
+export type LookoutMetricsDestinationProperties = {
+    /**
+     * The object specified in the Amazon Lookout for Metrics flow destination.
+     */
+    Object?: string | undefined;
+};
+export type MarketoConnectorOperator = "PROJECTION" | "LESS_THAN" | "GREATER_THAN" | "BETWEEN" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that Amazon AppFlow applies when you use Marketo as a flow destination.
+ */
+export type MarketoDestinationProperties = {
+    /**
+     * The settings that determine how Amazon AppFlow handles an error when placing data in the destination. For example, this setting would determine if the flow should fail after one insertion error, or continue and attempt to insert every record regardless of the initial failure. `ErrorHandlingConfig` is a part of the destination connector details.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * The object specified in the Marketo flow destination.
+     */
+    Object: string;
+};
+/**
+ * The properties that are applied when Marketo is being used as a source.
+ */
+export type MarketoSourceProperties = {
+    /**
+     * The object specified in the Marketo flow source.
+     */
+    Object: string;
+};
+/**
+ * Specifies the configuration that Amazon AppFlow uses when it catalogs your data. When Amazon AppFlow catalogs your data, it stores metadata in a data catalog.
+ */
+export type MetadataCatalogConfig = {
+    /**
+     * Specifies the configuration that Amazon AppFlow uses when it catalogs your data with the AWS Glue Data Catalog .
+     */
+    GlueDataCatalog?: GlueDataCatalog | undefined;
+};
+export type Operator = "PROJECTION" | "LESS_THAN" | "GREATER_THAN" | "CONTAINS" | "BETWEEN" | "LESS_THAN_OR_EQUAL_TO" | "GREATER_THAN_OR_EQUAL_TO" | "EQUAL_TO" | "NOT_EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+export type OperatorPropertiesKeys = "VALUE" | "VALUES" | "DATA_TYPE" | "UPPER_BOUND" | "LOWER_BOUND" | "SOURCE_DATA_TYPE" | "DESTINATION_DATA_TYPE" | "VALIDATION_ACTION" | "MASK_VALUE" | "MASK_LENGTH" | "TRUNCATE_LENGTH" | "MATH_OPERATION_FIELDS_ORDER" | "CONCAT_FORMAT" | "SUBFIELD_CATEGORY_MAP" | "EXCLUDE_SOURCE_FIELDS_LIST" | "INCLUDE_NEW_FIELDS" | "ORDERED_PARTITION_KEYS_LIST";
+export type PardotConnectorOperator = "PROJECTION" | "EQUAL_TO" | "NO_OP" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC";
+/**
+ * The properties that are applied when Salesforce Pardot is being used as a source.
+ */
+export type PardotSourceProperties = {
+    /**
+     * The object specified in the Salesforce Pardot flow source.
+     */
+    Object: string;
+};
+export type PathPrefix = "EXECUTION_ID" | "SCHEMA_VERSION";
+/**
+ * Specifies elements that Amazon AppFlow includes in the file and folder names in the flow destination.
+ */
+export type PrefixConfig = {
+    /**
+     * Specifies whether the destination file path includes either or both of the following elements:
+     *
+     * - **EXECUTION_ID** - The ID that Amazon AppFlow assigns to the flow run.
+     * - **SCHEMA_VERSION** - The version number of your data schema. Amazon AppFlow assigns this version number. The version number increases by one when you change any of the following settings in your flow configuration:
+     *
+     * - Source-to-destination field mappings
+     * - Field data types
+     * - Partition keys
+     */
+    PathPrefixHierarchy?: PathPrefix[] | undefined;
+    /**
+     * Determines the level of granularity for the date and time that's included in the prefix.
+     */
+    PrefixFormat?: PrefixFormat | undefined;
+    /**
+     * Determines the format of the prefix, and whether it applies to the file name, file path, or both.
+     */
+    PrefixType?: PrefixType | undefined;
+};
+export type PrefixFormat = "YEAR" | "MONTH" | "DAY" | "HOUR" | "MINUTE";
+export type PrefixType = "FILENAME" | "PATH" | "PATH_AND_FILENAME";
+/**
+ * The properties that are applied when Amazon Redshift is being used as a destination.
+ */
+export type RedshiftDestinationProperties = {
+    /**
+     * The object key for the bucket in which Amazon AppFlow places the destination files.
+     */
+    BucketPrefix?: string | undefined;
+    /**
+     * The settings that determine how Amazon AppFlow handles an error when placing data in the Amazon Redshift destination. For example, this setting would determine if the flow should fail after one insertion error, or continue and attempt to insert every record regardless of the initial failure. `ErrorHandlingConfig` is a part of the destination connector details.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * The intermediate bucket that Amazon AppFlow uses when moving data into Amazon Redshift.
+     */
+    IntermediateBucketName: string;
+    /**
+     * The object specified in the Amazon Redshift flow destination.
+     */
+    Object: string;
+};
+export type S3ConnectorOperator = "PROJECTION" | "LESS_THAN" | "GREATER_THAN" | "BETWEEN" | "LESS_THAN_OR_EQUAL_TO" | "GREATER_THAN_OR_EQUAL_TO" | "EQUAL_TO" | "NOT_EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Amazon S3 is used as a destination.
+ */
+export type S3DestinationProperties = {
+    /**
+     * The Amazon S3 bucket name in which Amazon AppFlow places the transferred data.
+     */
+    BucketName: string;
+    /**
+     * The object key for the destination bucket in which Amazon AppFlow places the files.
+     */
+    BucketPrefix?: string | undefined;
+    /**
+     * The configuration that determines how Amazon AppFlow should format the flow output data when Amazon S3 is used as the destination.
+     */
+    S3OutputFormatConfig?: S3OutputFormatConfig | undefined;
+};
+/**
+ * When you use Amazon S3 as the source, the configuration format that you provide the flow input data.
+ */
+export type S3InputFormatConfig = {
+    /**
+     * The file type that Amazon AppFlow gets from your Amazon S3 bucket.
+     */
+    S3InputFileType?: "CSV" | "JSON" | undefined;
+};
+/**
+ * The configuration that determines how Amazon AppFlow should format the flow output data when Amazon S3 is used as the destination.
+ */
+export type S3OutputFormatConfig = {
+    /**
+     * The aggregation settings that you can use to customize the output format of your flow data.
+     */
+    AggregationConfig?: AggregationConfig | undefined;
+    /**
+     * Indicates the file type that Amazon AppFlow places in the Amazon S3 bucket.
+     */
+    FileType?: FileType | undefined;
+    /**
+     * Determines the prefix that Amazon AppFlow applies to the folder name in the Amazon S3 bucket. You can name folders according to the flow frequency and date.
+     */
+    PrefixConfig?: PrefixConfig | undefined;
+    /**
+     * If your file output format is Parquet, use this parameter to set whether Amazon AppFlow preserves the data types in your source data when it writes the output to Amazon S3.
+     *
+     * - `true` : Amazon AppFlow preserves the data types when it writes to Amazon S3. For example, an integer or `1` in your source data is still an integer in your output.
+     * - `false` : Amazon AppFlow converts all of the source data into strings when it writes to Amazon S3. For example, an integer of `1` in your source data becomes the string `"1"` in the output.
+     */
+    PreserveSourceDataTyping?: boolean | undefined;
+};
+/**
+ * The properties that are applied when Amazon S3 is being used as the flow source.
+ */
+export type S3SourceProperties = {
+    /**
+     * The Amazon S3 bucket name where the source files are stored.
+     */
+    BucketName: string;
+    /**
+     * The object key for the Amazon S3 bucket in which the source files are stored.
+     */
+    BucketPrefix: string;
+    /**
+     * When you use Amazon S3 as the source, the configuration format that you provide the flow input data.
+     */
+    S3InputFormatConfig?: S3InputFormatConfig | undefined;
+};
+export type SAPODataConnectorOperator = "PROJECTION" | "LESS_THAN" | "CONTAINS" | "GREATER_THAN" | "BETWEEN" | "LESS_THAN_OR_EQUAL_TO" | "GREATER_THAN_OR_EQUAL_TO" | "EQUAL_TO" | "NOT_EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when using SAPOData as a flow destination
+ */
+export type SAPODataDestinationProperties = {
+    /**
+     * The settings that determine how Amazon AppFlow handles an error when placing data in the destination. For example, this setting would determine if the flow should fail after one insertion error, or continue and attempt to insert every record regardless of the initial failure. `ErrorHandlingConfig` is a part of the destination connector details.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * A list of field names that can be used as an ID field when performing a write operation.
+     */
+    IdFieldNames?: string[] | undefined;
+    /**
+     * The object path specified in the SAPOData flow destination.
+     */
+    ObjectPath: string;
+    /**
+     * Determines how Amazon AppFlow handles the success response that it gets from the connector after placing data.
+     *
+     * For example, this setting would determine where to write the response from a destination connector upon a successful insert operation.
+     */
+    SuccessResponseHandlingConfig?: SuccessResponseHandlingConfig | undefined;
+    /**
+     * The possible write operations in the destination connector. When this value is not provided, this defaults to the `INSERT` operation.
+     */
+    WriteOperationType?: WriteOperationType | undefined;
+};
+/**
+ * Sets the page size for each *concurrent process* that transfers OData records from your SAP instance. A concurrent process is query that retrieves a batch of records as part of a flow run. Amazon AppFlow can run multiple concurrent processes in parallel to transfer data faster.
+ */
+export type SAPODataPaginationConfig = {
+    /**
+     * The maximum number of records that Amazon AppFlow receives in each page of the response from your SAP application. For transfers of OData records, the maximum page size is 3,000. For transfers of data that comes from an ODP provider, the maximum page size is 10,000.
+     */
+    maxPageSize: number;
+};
+/**
+ * Sets the number of *concurrent processes* that transfer OData records from your SAP instance. A concurrent process is query that retrieves a batch of records as part of a flow run. Amazon AppFlow can run multiple concurrent processes in parallel to transfer data faster.
+ */
+export type SAPODataParallelismConfig = {
+    /**
+     * The maximum number of processes that Amazon AppFlow runs at the same time when it retrieves your data from your SAP application.
+     */
+    maxParallelism: number;
+};
+/**
+ * The properties that are applied when using SAPOData as a flow source.
+ */
+export type SAPODataSourceProperties = {
+    /**
+     * The object path specified in the SAPOData flow source.
+     */
+    ObjectPath: string;
+    /**
+     * Sets the page size for each concurrent process that transfers OData records from your SAP instance.
+     */
+    paginationConfig?: SAPODataPaginationConfig | undefined;
+    /**
+     * Sets the number of concurrent processes that transfers OData records from your SAP instance.
+     */
+    parallelismConfig?: SAPODataParallelismConfig | undefined;
+};
+export type SalesforceConnectorOperator = "PROJECTION" | "LESS_THAN" | "CONTAINS" | "GREATER_THAN" | "BETWEEN" | "LESS_THAN_OR_EQUAL_TO" | "GREATER_THAN_OR_EQUAL_TO" | "EQUAL_TO" | "NOT_EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Salesforce is being used as a destination.
+ */
+export type SalesforceDestinationProperties = {
+    /**
+     * Specifies which Salesforce API is used by Amazon AppFlow when your flow transfers data to Salesforce.
+     *
+     * - **AUTOMATIC** - The default. Amazon AppFlow selects which API to use based on the number of records that your flow transfers to Salesforce. If your flow transfers fewer than 1,000 records, Amazon AppFlow uses Salesforce REST API. If your flow transfers 1,000 records or more, Amazon AppFlow uses Salesforce Bulk API 2.0.
+     *
+     * Each of these Salesforce APIs structures data differently. If Amazon AppFlow selects the API automatically, be aware that, for recurring flows, the data output might vary from one flow run to the next. For example, if a flow runs daily, it might use REST API on one day to transfer 900 records, and it might use Bulk API 2.0 on the next day to transfer 1,100 records. For each of these flow runs, the respective Salesforce API formats the data differently. Some of the differences include how dates are formatted and null values are represented. Also, Bulk API 2.0 doesn't transfer Salesforce compound fields.
+     *
+     * By choosing this option, you optimize flow performance for both small and large data transfers, but the tradeoff is inconsistent formatting in the output.
+     * - **BULKV2** - Amazon AppFlow uses only Salesforce Bulk API 2.0. This API runs asynchronous data transfers, and it's optimal for large sets of data. By choosing this option, you ensure that your flow writes consistent output, but you optimize performance only for large data transfers.
+     *
+     * Note that Bulk API 2.0 does not transfer Salesforce compound fields.
+     * - **REST_SYNC** - Amazon AppFlow uses only Salesforce REST API. By choosing this option, you ensure that your flow writes consistent output, but you decrease performance for large data transfers that are better suited for Bulk API 2.0. In some cases, if your flow attempts to transfer a vary large set of data, it might fail with a timed out error.
+     */
+    DataTransferApi?: DataTransferApi | undefined;
+    /**
+     * The settings that determine how Amazon AppFlow handles an error when placing data in the Salesforce destination. For example, this setting would determine if the flow should fail after one insertion error, or continue and attempt to insert every record regardless of the initial failure. `ErrorHandlingConfig` is a part of the destination connector details.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * The name of the field that Amazon AppFlow uses as an ID when performing a write operation such as update or delete.
+     */
+    IdFieldNames?: string[] | undefined;
+    /**
+     * The object specified in the Salesforce flow destination.
+     */
+    Object: string;
+    /**
+     * This specifies the type of write operation to be performed in Salesforce. When the value is `UPSERT` , then `idFieldNames` is required.
+     */
+    WriteOperationType?: WriteOperationType | undefined;
+};
+/**
+ * The properties that are applied when Salesforce is being used as a source.
+ */
+export type SalesforceSourceProperties = {
+    /**
+     * Specifies which Salesforce API is used by Amazon AppFlow when your flow transfers data from Salesforce.
+     *
+     * - **AUTOMATIC** - The default. Amazon AppFlow selects which API to use based on the number of records that your flow transfers from Salesforce. If your flow transfers fewer than 1,000,000 records, Amazon AppFlow uses Salesforce REST API. If your flow transfers 1,000,000 records or more, Amazon AppFlow uses Salesforce Bulk API 2.0.
+     *
+     * Each of these Salesforce APIs structures data differently. If Amazon AppFlow selects the API automatically, be aware that, for recurring flows, the data output might vary from one flow run to the next. For example, if a flow runs daily, it might use REST API on one day to transfer 900,000 records, and it might use Bulk API 2.0 on the next day to transfer 1,100,000 records. For each of these flow runs, the respective Salesforce API formats the data differently. Some of the differences include how dates are formatted and null values are represented. Also, Bulk API 2.0 doesn't transfer Salesforce compound fields.
+     *
+     * By choosing this option, you optimize flow performance for both small and large data transfers, but the tradeoff is inconsistent formatting in the output.
+     * - **BULKV2** - Amazon AppFlow uses only Salesforce Bulk API 2.0. This API runs asynchronous data transfers, and it's optimal for large sets of data. By choosing this option, you ensure that your flow writes consistent output, but you optimize performance only for large data transfers.
+     *
+     * Note that Bulk API 2.0 does not transfer Salesforce compound fields.
+     * - **REST_SYNC** - Amazon AppFlow uses only Salesforce REST API. By choosing this option, you ensure that your flow writes consistent output, but you decrease performance for large data transfers that are better suited for Bulk API 2.0. In some cases, if your flow attempts to transfer a vary large set of data, it might fail wituh a timed out error.
+     */
+    DataTransferApi?: DataTransferApi | undefined;
+    /**
+     * The flag that enables dynamic fetching of new (recently added) fields in the Salesforce objects while running a flow.
+     */
+    EnableDynamicFieldUpdate?: boolean | undefined;
+    /**
+     * Indicates whether Amazon AppFlow includes deleted files in the flow run.
+     */
+    IncludeDeletedRecords?: boolean | undefined;
+    /**
+     * The object specified in the Salesforce flow source.
+     */
+    Object: string;
+};
+/**
+ * Specifies the configuration details of a schedule-triggered flow as defined by the user. Currently, these settings only apply to the `Scheduled` trigger type.
+ */
+export type ScheduledTriggerProperties = {
+    /**
+     * Specifies whether a scheduled flow has an incremental data transfer or a complete data transfer for each flow run.
+     */
+    DataPullMode?: "Incremental" | "Complete" | undefined;
+    /**
+     * Specifies the date range for the records to import from the connector in the first flow run.
+     */
+    FirstExecutionFrom?: number | undefined;
+    /**
+     * Defines how many times a scheduled flow fails consecutively before Amazon AppFlow deactivates it.
+     * @min 1
+     * @max 100
+     */
+    FlowErrorDeactivationThreshold?: number | undefined;
+    /**
+     * The time at which the scheduled flow ends. The time is formatted as a timestamp that follows the ISO 8601 standard, such as `2022-04-27T13:00:00-07:00` .
+     */
+    ScheduleEndTime?: number | undefined;
+    /**
+     * The scheduling expression that determines the rate at which the schedule will run, for example `rate(5minutes)` .
+     * @minLength 1
+     * @maxLength 256
+     */
+    ScheduleExpression: string;
+    /**
+     * Specifies the optional offset that is added to the time interval for a schedule-triggered flow.
+     * @min 0
+     * @max 36000
+     */
+    ScheduleOffset?: number | undefined;
+    /**
+     * The time at which the scheduled flow starts. The time is formatted as a timestamp that follows the ISO 8601 standard, such as `2022-04-26T13:00:00-07:00` .
+     */
+    ScheduleStartTime?: number | undefined;
+    /**
+     * Specifies the time zone used when referring to the dates and times of a scheduled flow, such as `America/New_York` . This time zone is only a descriptive label. It doesn't affect how Amazon AppFlow interprets the timestamps that you specify to schedule the flow.
+     *
+     * If you want to schedule a flow by using times in a particular time zone, indicate the time zone as a UTC offset in your timestamps. For example, the UTC offsets for the `America/New_York` timezone are `-04:00` EDT and `-05:00 EST` .
+     * @maxLength 256
+     */
+    TimeZone?: string | undefined;
+};
+export type ServiceNowConnectorOperator = "PROJECTION" | "LESS_THAN" | "CONTAINS" | "GREATER_THAN" | "BETWEEN" | "LESS_THAN_OR_EQUAL_TO" | "GREATER_THAN_OR_EQUAL_TO" | "EQUAL_TO" | "NOT_EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when ServiceNow is being used as a source.
+ */
+export type ServiceNowSourceProperties = {
+    /**
+     * The object specified in the ServiceNow flow source.
+     */
+    Object: string;
+};
+export type SingularConnectorOperator = "PROJECTION" | "EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Singular is being used as a source.
+ */
+export type SingularSourceProperties = {
+    /**
+     * The object specified in the Singular flow source.
+     */
+    Object: string;
+};
+export type SlackConnectorOperator = "PROJECTION" | "BETWEEN" | "EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Slack is being used as a source.
+ */
+export type SlackSourceProperties = {
+    /**
+     * The object specified in the Slack flow source.
+     */
+    Object: string;
+};
+/**
+ * The properties that are applied when Snowflake is being used as a destination.
+ */
+export type SnowflakeDestinationProperties = {
+    /**
+     * The object key for the destination bucket in which Amazon AppFlow places the files.
+     */
+    BucketPrefix?: string | undefined;
+    /**
+     * The settings that determine how Amazon AppFlow handles an error when placing data in the Snowflake destination. For example, this setting would determine if the flow should fail after one insertion error, or continue and attempt to insert every record regardless of the initial failure. `ErrorHandlingConfig` is a part of the destination connector details.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * The intermediate bucket that Amazon AppFlow uses when moving data into Snowflake.
+     */
+    IntermediateBucketName: string;
+    /**
+     * The object specified in the Snowflake flow destination.
+     */
+    Object: string;
+};
+/**
+ * Specifies the information that is required to query a particular connector.
+ */
+export type SourceConnectorProperties = {
+    /**
+     * Specifies the information that is required for querying Amplitude.
+     */
+    Amplitude?: AmplitudeSourceProperties | undefined;
+    /**
+     * The properties that are applied when the custom connector is being used as a source.
+     */
+    CustomConnector?: CustomConnectorSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Datadog.
+     */
+    Datadog?: DatadogSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Dynatrace.
+     */
+    Dynatrace?: DynatraceSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Google Analytics.
+     */
+    GoogleAnalytics?: GoogleAnalyticsSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Infor Nexus.
+     */
+    InforNexus?: InforNexusSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Marketo.
+     */
+    Marketo?: MarketoSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Salesforce Pardot.
+     */
+    Pardot?: PardotSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Amazon S3.
+     */
+    S3?: S3SourceProperties | undefined;
+    /**
+     * The properties that are applied when using SAPOData as a flow source.
+     */
+    SAPOData?: SAPODataSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Salesforce.
+     */
+    Salesforce?: SalesforceSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying ServiceNow.
+     */
+    ServiceNow?: ServiceNowSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Singular.
+     */
+    Singular?: SingularSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Slack.
+     */
+    Slack?: SlackSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Trend Micro.
+     */
+    Trendmicro?: TrendmicroSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Veeva.
+     */
+    Veeva?: VeevaSourceProperties | undefined;
+    /**
+     * Specifies the information that is required for querying Zendesk.
+     */
+    Zendesk?: ZendeskSourceProperties | undefined;
+};
+/**
+ * Contains information about the configuration of the source connector used in the flow.
+ */
+export type SourceFlowConfig = {
+    /**
+     * The API version of the connector when it's used as a source in the flow.
+     */
+    ApiVersion?: string | undefined;
+    /**
+     * The name of the connector profile. This name must be unique for each connector profile in the AWS account .
+     */
+    ConnectorProfileName?: string | undefined;
+    /**
+     * The type of connector, such as Salesforce, Amplitude, and so on.
+     */
+    ConnectorType: ConnectorType;
+    /**
+     * Defines the configuration for a scheduled incremental data pull. If a valid configuration is provided, the fields specified in the configuration are used when querying for the incremental data pull.
+     */
+    IncrementalPullConfig?: IncrementalPullConfig | undefined;
+    /**
+     * Specifies the information that is required to query a particular source connector.
+     */
+    SourceConnectorProperties: SourceConnectorProperties;
+};
+/**
+ * Determines how Amazon AppFlow handles the success response that it gets from the connector after placing data.
+ *
+ * For example, this setting would determine where to write the response from the destination connector upon a successful insert operation.
+ */
+export type SuccessResponseHandlingConfig = {
+    /**
+     * The name of the Amazon S3 bucket.
+     */
+    BucketName?: string | undefined;
+    /**
+     * The Amazon S3 bucket prefix.
+     */
+    BucketPrefix?: string | undefined;
+};
+/**
+ * A class for modeling different type of tasks. Task implementation varies based on the `TaskType` .
+ */
+export type Task = {
+    /**
+     * The operation to be performed on the provided source fields.
+     */
+    ConnectorOperator?: ConnectorOperator | undefined;
+    /**
+     * A field in a destination connector, or a field value against which Amazon AppFlow validates a source field.
+     * @maxLength 256
+     */
+    DestinationField?: string | undefined;
+    /**
+     * The source fields to which a particular task is applied.
+     */
+    SourceFields: string[];
+    /**
+     * A map used to store task-related information. The execution service looks for particular information based on the `TaskType` .
+     */
+    TaskProperties?: TaskPropertiesObject[] | undefined;
+    /**
+     * Specifies the particular task implementation that Amazon AppFlow performs.
+     *
+     * *Allowed values* : `Arithmetic` | `Filter` | `Map` | `Map_all` | `Mask` | `Merge` | `Truncate` | `Validate`
+     */
+    TaskType: TaskType;
+};
+/**
+ * A map used to store task-related information. The execution service looks for particular information based on the `TaskType` .
+ */
+export type TaskPropertiesObject = {
+    /**
+     * The task property key.
+     */
+    Key: OperatorPropertiesKeys;
+    /**
+     * The task property value.
+     * @maxLength 2048
+     * @pattern .+
+     */
+    Value: string;
+};
+export type TaskType = "Arithmetic" | "Filter" | "Map" | "Map_all" | "Mask" | "Merge" | "Passthrough" | "Truncate" | "Validate" | "Partition";
+export type TrendmicroConnectorOperator = "PROJECTION" | "EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when using Trend Micro as a flow source.
+ */
+export type TrendmicroSourceProperties = {
+    /**
+     * The object specified in the Trend Micro flow source.
+     */
+    Object: string;
+};
+/**
+ * The trigger settings that determine how and when Amazon AppFlow runs the specified flow.
+ */
+export type TriggerConfig = {
+    /**
+     * Specifies the configuration details of a schedule-triggered flow as defined by the user. Currently, these settings only apply to the `Scheduled` trigger type.
+     */
+    TriggerProperties?: ScheduledTriggerProperties | undefined;
+    /**
+     * Specifies the type of flow trigger. This can be `OnDemand` , `Scheduled` , or `Event` .
+     */
+    TriggerType: TriggerType;
+};
+export type TriggerType = "Scheduled" | "Event" | "OnDemand";
+/**
+ * The properties that are applied when Upsolver is used as a destination.
+ */
+export type UpsolverDestinationProperties = {
+    /**
+     * The Upsolver Amazon S3 bucket name in which Amazon AppFlow places the transferred data.
+     */
+    BucketName: string;
+    /**
+     * The object key for the destination Upsolver Amazon S3 bucket in which Amazon AppFlow places the files.
+     */
+    BucketPrefix?: string | undefined;
+    /**
+     * The configuration that determines how data is formatted when Upsolver is used as the flow destination.
+     */
+    S3OutputFormatConfig: UpsolverS3OutputFormatConfig;
+};
+/**
+ * The configuration that determines how Amazon AppFlow formats the flow output data when Upsolver is used as the destination.
+ */
+export type UpsolverS3OutputFormatConfig = {
+    /**
+     * The aggregation settings that you can use to customize the output format of your flow data.
+     */
+    AggregationConfig?: AggregationConfig | undefined;
+    /**
+     * Indicates the file type that Amazon AppFlow places in the Upsolver Amazon S3 bucket.
+     */
+    FileType?: FileType | undefined;
+    /**
+     * Specifies elements that Amazon AppFlow includes in the file and folder names in the flow destination.
+     */
+    PrefixConfig: PrefixConfig;
+};
+export type VeevaConnectorOperator = "PROJECTION" | "LESS_THAN" | "GREATER_THAN" | "BETWEEN" | "LESS_THAN_OR_EQUAL_TO" | "GREATER_THAN_OR_EQUAL_TO" | "EQUAL_TO" | "NOT_EQUAL_TO" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when using Veeva as a flow source.
+ */
+export type VeevaSourceProperties = {
+    /**
+     * The document type specified in the Veeva document extract flow.
+     */
+    DocumentType?: string | undefined;
+    /**
+     * Boolean value to include All Versions of files in Veeva document extract flow.
+     */
+    IncludeAllVersions?: boolean | undefined;
+    /**
+     * Boolean value to include file renditions in Veeva document extract flow.
+     */
+    IncludeRenditions?: boolean | undefined;
+    /**
+     * Boolean value to include source files in Veeva document extract flow.
+     */
+    IncludeSourceFiles?: boolean | undefined;
+    /**
+     * The object specified in the Veeva flow source.
+     */
+    Object: string;
+};
+export type WriteOperationType = "INSERT" | "UPSERT" | "UPDATE" | "DELETE";
+export type ZendeskConnectorOperator = "PROJECTION" | "GREATER_THAN" | "ADDITION" | "MULTIPLICATION" | "DIVISION" | "SUBTRACTION" | "MASK_ALL" | "MASK_FIRST_N" | "MASK_LAST_N" | "VALIDATE_NON_NULL" | "VALIDATE_NON_ZERO" | "VALIDATE_NON_NEGATIVE" | "VALIDATE_NUMERIC" | "NO_OP";
+/**
+ * The properties that are applied when Zendesk is used as a destination.
+ */
+export type ZendeskDestinationProperties = {
+    /**
+     * The settings that determine how Amazon AppFlow handles an error when placing data in the destination. For example, this setting would determine if the flow should fail after one insertion error, or continue and attempt to insert every record regardless of the initial failure. `ErrorHandlingConfig` is a part of the destination connector details.
+     */
+    ErrorHandlingConfig?: ErrorHandlingConfig | undefined;
+    /**
+     * A list of field names that can be used as an ID field when performing a write operation.
+     */
+    IdFieldNames?: string[] | undefined;
+    /**
+     * The object specified in the Zendesk flow destination.
+     */
+    Object: string;
+    /**
+     * The possible write operations in the destination connector. When this value is not provided, this defaults to the `INSERT` operation.
+     */
+    WriteOperationType?: WriteOperationType | undefined;
+};
+/**
+ * The properties that are applied when using Zendesk as a flow source.
+ */
+export type ZendeskSourceProperties = {
+    /**
+     * The object specified in the Zendesk flow source.
+     */
+    Object: string;
+};
+//# sourceMappingURL=aws-appflow-flow.d.ts.map