@propulsionworks/cloudformation 0.0.1 → 0.1.0

package/out/exports/resources.generated/aws-elasticache-replicationgroup.d.ts

@@ -0,0 +1,446 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type ElastiCacheReplicationGroup = ResourceDefinitionWithAttributes<"AWS::ElastiCache::ReplicationGroup", ElastiCacheReplicationGroupProps, ElastiCacheReplicationGroupAttribs>;
+/**
+ * The `AWS::ElastiCache::ReplicationGroup` resource creates an Amazon ElastiCache (Valkey or Redis OSS) replication group. A Valkey or Redis OSS (cluster mode disabled) replication group is a collection of cache clusters, where one of the clusters is a primary read-write cluster and the others are read-only replicas.
+ *
+ * A Valkey or Redis OSS (cluster mode enabled) cluster is comprised of from 1 to 90 shards (API/CLI: node groups). Each shard has a primary node and up to 5 read-only replica nodes. The configuration can range from 90 shards and 0 replicas to 15 shards and 5 replicas, which is the maximum number or replicas allowed.
+ *
+ * The node or shard limit can be increased to a maximum of 500 per cluster if the engine version is Valkey 7.2 or higher, or Redis OSS 5.0.6 or higher. For example, you can choose to configure a 500 node cluster that ranges between 83 shards (one primary and 5 replicas per shard) and 500 shards (single primary and no replicas). Make sure there are enough available IP addresses to accommodate the increase. Common pitfalls include the subnets in the subnet group have too small a CIDR range or the subnets are shared and heavily used by other clusters. For more information, see [Creating a Subnet Group](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/SubnetGroups.Creating.html) . For versions below 5.0.6, the limit is 250 per cluster.
+ *
+ * To request a limit increase, see [Amazon Service Limits](https://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html) and choose the limit type *Nodes per cluster per instance type* .
+ */
+export type ElastiCacheReplicationGroupProps = {
+    /**
+     * A flag that enables encryption at rest when set to `true` .
+     *
+     * *Required:* Only available when creating a replication group in an Amazon VPC using Redis OSS version `3.2.6` or `4.x` onward.
+     *
+     * Default: `false`
+     */
+    AtRestEncryptionEnabled?: boolean | undefined;
+    /**
+     * *Reserved parameter.* The password used to access a password protected server.
+     *
+     * `AuthToken` can be specified only on replication groups where `TransitEncryptionEnabled` is `true` . For more information, see [Authenticating Valkey or Redis OSS users with the AUTH Command](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/auth.html) .
+     *
+     * > For HIPAA compliance, you must specify `TransitEncryptionEnabled` as `true` , an `AuthToken` , and a `CacheSubnetGroup` .
+     *
+     * Password constraints:
+     *
+     * - Must be only printable ASCII characters.
+     * - Must be at least 16 characters and no more than 128 characters in length.
+     * - Nonalphanumeric characters are restricted to (!, &, #, $, ^, <, >, -, ).
+     *
+     * For more information, see [AUTH password](https://docs.aws.amazon.com/http://redis.io/commands/AUTH) at http://redis.io/commands/AUTH.
+     *
+     * > If ADDING the AuthToken, update requires [Replacement](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement) .
+     */
+    AuthToken?: string | undefined;
+    /**
+     * If you are running Valkey 7.2 or later, or Redis OSS 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
+     */
+    AutoMinorVersionUpgrade?: boolean | undefined;
+    /**
+     * Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails.
+     *
+     * `AutomaticFailoverEnabled` must be enabled for Valkey or Redis OSS (cluster mode enabled) replication groups.
+     *
+     * Default: false
+     */
+    AutomaticFailoverEnabled?: boolean | undefined;
+    /**
+     * The compute and memory capacity of the nodes in the node group (shard).
+     *
+     * The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts.
+     *
+     * - General purpose:
+     *
+     * - Current generation:
+     *
+     * *M6g node types:* `cache.m6g.large` , `cache.m6g.xlarge` , `cache.m6g.2xlarge` , `cache.m6g.4xlarge` , `cache.m6g.12xlarge` , `cache.m6g.24xlarge`
+     *
+     * *M5 node types:* `cache.m5.large` , `cache.m5.xlarge` , `cache.m5.2xlarge` , `cache.m5.4xlarge` , `cache.m5.12xlarge` , `cache.m5.24xlarge`
+     *
+     * *M4 node types:* `cache.m4.large` , `cache.m4.xlarge` , `cache.m4.2xlarge` , `cache.m4.4xlarge` , `cache.m4.10xlarge`
+     *
+     * *T4g node types:* `cache.t4g.micro` , `cache.t4g.small` , `cache.t4g.medium`
+     *
+     * *T3 node types:* `cache.t3.micro` , `cache.t3.small` , `cache.t3.medium`
+     *
+     * *T2 node types:* `cache.t2.micro` , `cache.t2.small` , `cache.t2.medium`
+     * - Previous generation: (not recommended)
+     *
+     * *T1 node types:* `cache.t1.micro`
+     *
+     * *M1 node types:* `cache.m1.small` , `cache.m1.medium` , `cache.m1.large` , `cache.m1.xlarge`
+     *
+     * *M3 node types:* `cache.m3.medium` , `cache.m3.large` , `cache.m3.xlarge` , `cache.m3.2xlarge`
+     * - Compute optimized:
+     *
+     * - Previous generation: (not recommended)
+     *
+     * *C1 node types:* `cache.c1.xlarge`
+     * - Memory optimized:
+     *
+     * - Current generation:
+     *
+     * *R6gd node types:* `cache.r6gd.xlarge` , `cache.r6gd.2xlarge` , `cache.r6gd.4xlarge` , `cache.r6gd.8xlarge` , `cache.r6gd.12xlarge` , `cache.r6gd.16xlarge`
+     *
+     * > The `r6gd` family is available in the following regions: `us-east-2` , `us-east-1` , `us-west-2` , `us-west-1` , `eu-west-1` , `eu-central-1` , `ap-northeast-1` , `ap-southeast-1` , `ap-southeast-2` .
+     *
+     * *R6g node types:* `cache.r6g.large` , `cache.r6g.xlarge` , `cache.r6g.2xlarge` , `cache.r6g.4xlarge` , `cache.r6g.12xlarge` , `cache.r6g.24xlarge`
+     *
+     * *R5 node types:* `cache.r5.large` , `cache.r5.xlarge` , `cache.r5.2xlarge` , `cache.r5.4xlarge` , `cache.r5.12xlarge` , `cache.r5.24xlarge`
+     *
+     * *R4 node types:* `cache.r4.large` , `cache.r4.xlarge` , `cache.r4.2xlarge` , `cache.r4.4xlarge` , `cache.r4.8xlarge` , `cache.r4.16xlarge`
+     * - Previous generation: (not recommended)
+     *
+     * *M2 node types:* `cache.m2.xlarge` , `cache.m2.2xlarge` , `cache.m2.4xlarge`
+     *
+     * *R3 node types:* `cache.r3.large` , `cache.r3.xlarge` , `cache.r3.2xlarge` , `cache.r3.4xlarge` , `cache.r3.8xlarge`
+     *
+     * For region availability, see [Supported Node Types by Amazon Region](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion)
+     */
+    CacheNodeType?: string | undefined;
+    /**
+     * The name of the parameter group to associate with this replication group. If this argument is omitted, the default cache parameter group for the specified engine is used.
+     *
+     * If you are running Valkey or Redis OSS version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name.
+     *
+     * - To create a Valkey or Redis OSS (cluster mode disabled) replication group, use `CacheParameterGroupName=default.redis3.2` .
+     * - To create a Valkey or Redis OSS (cluster mode enabled) replication group, use `CacheParameterGroupName=default.redis3.2.cluster.on` .
+     */
+    CacheParameterGroupName?: string | undefined;
+    /**
+     * A list of cache security group names to associate with this replication group.
+     */
+    CacheSecurityGroupNames?: string[] | undefined;
+    /**
+     * The name of the cache subnet group to be used for the replication group.
+     *
+     * > If you're going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see [AWS::ElastiCache::SubnetGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-subnetgroup.html) .
+     */
+    CacheSubnetGroupName?: string | undefined;
+    /**
+     * The mode can be enabled or disabled. To change the cluster mode from disabled to enabled, you must first set the cluster mode to compatible. The compatible mode allows your Valkey or Redis OSS clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Valkey or Redis OSS clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to enabled. For more information, see [Modify cluster mode](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/modify-cluster-mode.html) .
+     */
+    ClusterMode?: string | undefined;
+    /**
+     * Enables data tiering. Data tiering is only supported for replication groups using the r6gd node type. This parameter must be set to true when using r6gd nodes. For more information, see [Data tiering](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/data-tiering.html) .
+     */
+    DataTieringEnabled?: boolean | undefined;
+    /**
+     * The name of the cache engine to be used for the clusters in this replication group. The value must be set to `valkey` or `redis` .
+     *
+     * > Upgrading an existing engine from redis to valkey is done through in-place migration, and requires a parameter group.
+     */
+    Engine?: string | undefined;
+    /**
+     * The version number of the cache engine to be used for the clusters in this replication group. To view the supported cache engine versions, use the `DescribeCacheEngineVersions` operation.
+     *
+     * *Important:* You can upgrade to a newer engine version (see [Selecting a Cache Engine and Version](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/SelectEngine.html#VersionManagement) ) in the *ElastiCache User Guide* , but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.
+     */
+    EngineVersion?: string | undefined;
+    /**
+     * The name of the Global datastore
+     */
+    GlobalReplicationGroupId?: string | undefined;
+    /**
+     * The network type you choose when creating a replication group, either `ipv4` | `ipv6` . IPv6 is supported for workloads using Valkey 7.2 and above, Redis OSS engine version 6.2 to 7.1 or Memcached engine version 1.6.6 and above on all instances built on the [Nitro system](https://docs.aws.amazon.com/ec2/nitro/) .
+     */
+    IpDiscovery?: string | undefined;
+    /**
+     * The ID of the KMS key used to encrypt the disk on the cluster.
+     */
+    KmsKeyId?: string | undefined;
+    /**
+     * Specifies the destination, format and type of the logs.
+     */
+    LogDeliveryConfigurations?: LogDeliveryConfigurationRequest[] | undefined;
+    /**
+     * A flag indicating if you have Multi-AZ enabled to enhance fault tolerance. For more information, see [Minimizing Downtime: Multi-AZ](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/AutoFailover.html) .
+     */
+    MultiAZEnabled?: boolean | undefined;
+    /**
+     * Must be either `ipv4` | `ipv6` | `dual_stack` . IPv6 is supported for workloads using Valkey 7.2 and above, Redis OSS engine version 6.2 to 7.1 and Memcached engine version 1.6.6 and above on all instances built on the [Nitro system](https://docs.aws.amazon.com/ec2/nitro/) .
+     */
+    NetworkType?: string | undefined;
+    /**
+     * `NodeGroupConfiguration` is a property of the `AWS::ElastiCache::ReplicationGroup` resource that configures an Amazon ElastiCache (ElastiCache) Valkey or Redis OSS cluster node group.
+     *
+     * If you set [UseOnlineResharding](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding) to `true` , you can update `NodeGroupConfiguration` without interruption. When `UseOnlineResharding` is set to `false` , or is not specified, updating `NodeGroupConfiguration` results in [replacement](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement) .
+     */
+    NodeGroupConfiguration?: NodeGroupConfiguration[] | undefined;
+    /**
+     * The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent.
+     *
+     * > The Amazon SNS topic owner must be the same as the cluster owner.
+     */
+    NotificationTopicArn?: string | undefined;
+    /**
+     * The number of clusters this replication group initially has.
+     *
+     * This parameter is not used if there is more than one node group (shard). You should use `ReplicasPerNodeGroup` instead.
+     *
+     * If `AutomaticFailoverEnabled` is `true` , the value of this parameter must be at least 2. If `AutomaticFailoverEnabled` is `false` you can omit this parameter (it will default to 1), or you can explicitly set it to a value between 2 and 6.
+     *
+     * The maximum permitted value for `NumCacheClusters` is 6 (1 primary plus 5 replicas).
+     */
+    NumCacheClusters?: number | undefined;
+    /**
+     * An optional parameter that specifies the number of node groups (shards) for this Valkey or Redis OSS (cluster mode enabled) replication group. For Valkey or Redis OSS (cluster mode disabled) either omit this parameter or set it to 1.
+     *
+     * If you set [UseOnlineResharding](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding) to `true` , you can update `NumNodeGroups` without interruption. When `UseOnlineResharding` is set to `false` , or is not specified, updating `NumNodeGroups` results in [replacement](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement) .
+     *
+     * Default: 1
+     */
+    NumNodeGroups?: number | undefined;
+    /**
+     * The port number on which each member of the replication group accepts connections.
+     */
+    Port?: number | undefined;
+    /**
+     * A list of EC2 Availability Zones in which the replication group's clusters are created. The order of the Availability Zones in the list is the order in which clusters are allocated. The primary cluster is created in the first AZ in the list.
+     *
+     * This parameter is not used if there is more than one node group (shard). You should use `NodeGroupConfiguration` instead.
+     *
+     * > If you are creating your replication group in an Amazon VPC (recommended), you can only locate clusters in Availability Zones associated with the subnets in the selected subnet group.
+     * >
+     * > The number of Availability Zones listed must equal the value of `NumCacheClusters` .
+     *
+     * Default: system chosen Availability Zones.
+     */
+    PreferredCacheClusterAZs?: string[] | undefined;
+    /**
+     * Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period.
+     *
+     * Valid values for `ddd` are:
+     *
+     * - `sun`
+     * - `mon`
+     * - `tue`
+     * - `wed`
+     * - `thu`
+     * - `fri`
+     * - `sat`
+     *
+     * Example: `sun:23:00-mon:01:30`
+     */
+    PreferredMaintenanceWindow?: string | undefined;
+    /**
+     * The identifier of the cluster that serves as the primary for this replication group. This cluster must already exist and have a status of `available` .
+     *
+     * This parameter is not required if `NumCacheClusters` , `NumNodeGroups` , or `ReplicasPerNodeGroup` is specified.
+     */
+    PrimaryClusterId?: string | undefined;
+    /**
+     * An optional parameter that specifies the number of replica nodes in each node group (shard). Valid values are 0 to 5.
+     */
+    ReplicasPerNodeGroup?: number | undefined;
+    /**
+     * A user-created description for the replication group.
+     */
+    ReplicationGroupDescription: string;
+    /**
+     * One or more Amazon VPC security groups associated with this replication group.
+     *
+     * Use this parameter only when you are creating a replication group in an Amazon Virtual Private Cloud (Amazon VPC).
+     */
+    SecurityGroupIds?: string[] | undefined;
+    /**
+     * A list of Amazon Resource Names (ARN) that uniquely identify the Valkey or Redis OSS RDB snapshot files stored in Amazon S3. The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter *NumNodeGroups* or the number of node groups configured by *NodeGroupConfiguration* regardless of the number of ARNs specified here.
+     *
+     * Example of an Amazon S3 ARN: `arn:aws:s3:::my_bucket/snapshot1.rdb`
+     */
+    SnapshotArns?: string[] | undefined;
+    /**
+     * The name of a snapshot from which to restore data into the new replication group. The snapshot status changes to `restoring` while the new replication group is being created.
+     */
+    SnapshotName?: string | undefined;
+    /**
+     * The number of days for which ElastiCache retains automatic snapshots before deleting them. For example, if you set `SnapshotRetentionLimit` to 5, a snapshot that was taken today is retained for 5 days before being deleted.
+     *
+     * Default: 0 (i.e., automatic backups are disabled for this cluster).
+     */
+    SnapshotRetentionLimit?: number | undefined;
+    /**
+     * The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard).
+     *
+     * Example: `05:00-09:00`
+     *
+     * If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range.
+     */
+    SnapshotWindow?: string | undefined;
+    /**
+     * The cluster ID that is used as the daily snapshot source for the replication group. This parameter cannot be set for Valkey or Redis OSS (cluster mode enabled) replication groups.
+     */
+    SnapshottingClusterId?: string | undefined;
+    /**
+     * A list of tags to be added to this resource. Tags are comma-separated key,value pairs (e.g. Key= `myKey` , Value= `myKeyValue` . You can include multiple tags as shown following: Key= `myKey` , Value= `myKeyValue` Key= `mySecondKey` , Value= `mySecondKeyValue` . Tags on replication groups will be replicated to all nodes.
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * A flag that enables in-transit encryption when set to `true` .
+     *
+     * This parameter is only available when creating a replication group in an Amazon VPC using Valkey version `7.2` and above, Redis OSS version `3.2.6` , or Redis OSS version `4.x` and above, and the cluster is being created in an Amazon VPC.
+     *
+     * If you enable in-transit encryption, you must also specify a value for `CacheSubnetGroup` .
+     *
+     * > TransitEncryptionEnabled is required when creating a new valkey replication group.
+     *
+     * Default: `false`
+     *
+     * > For HIPAA compliance, you must specify `TransitEncryptionEnabled` as `true` , an `AuthToken` , and a `CacheSubnetGroup` .
+     */
+    TransitEncryptionEnabled?: boolean | undefined;
+    /**
+     * A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.
+     *
+     * When setting `TransitEncryptionEnabled` to `true` , you can set your `TransitEncryptionMode` to `preferred` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Valkey or Redis OSS clients to use encrypted connections you can modify the value to `required` to allow encrypted connections only.
+     *
+     * Setting `TransitEncryptionMode` to `required` is a two-step process that requires you to first set the `TransitEncryptionMode` to `preferred` , after that you can set `TransitEncryptionMode` to `required` .
+     *
+     * This process will not trigger the replacement of the replication group.
+     */
+    TransitEncryptionMode?: string | undefined;
+    /**
+     * The ID of user group to associate with the replication group.
+     */
+    UserGroupIds?: string[] | undefined;
+};
+export type ElastiCacheReplicationGroupAttribs = {
+    /**
+     * The DNS hostname of the cache node.
+     *
+     * > Valkey or Redis OSS (cluster mode disabled) replication groups don't have this attribute. Therefore, `Fn::GetAtt` returns a value for this attribute only if the replication group is clustered. Otherwise, `Fn::GetAtt` fails. For Valkey or Redis OSS (cluster mode disabled) replication groups, use the `PrimaryEndpoint` or `ReadEndpoint` attributes.
+     */
+    "ConfigurationEndPoint.Address": string;
+    /**
+     * The port number that the cache engine is listening on.
+     */
+    "ConfigurationEndPoint.Port": string;
+    /**
+     * The DNS address of the primary read-write cache node.
+     */
+    "PrimaryEndPoint.Address": string;
+    /**
+     * The number of the port that the primary read-write cache engine is listening on.
+     */
+    "PrimaryEndPoint.Port": string;
+    /**
+     * A string with a list of endpoints for the primary and read-only replicas. The order of the addresses maps to the order of the ports from the `ReadEndPoint.Ports` attribute.
+     */
+    "ReadEndPoint.Addresses": string;
+    /**
+     * A string with a list of endpoints for the read-only replicas. The order of the addresses maps to the order of the ports from the `ReadEndPoint.Ports` attribute.
+     */
+    "ReadEndPoint.Addresses.List": string[];
+    /**
+     * A string with a list of ports for the read-only replicas. The order of the ports maps to the order of the addresses from the `ReadEndPoint.Addresses` attribute.
+     */
+    "ReadEndPoint.Ports": string;
+    /**
+     * A string with a list of ports for the read-only replicas. The order of the ports maps to the order of the addresses from the ReadEndPoint.Addresses attribute.
+     */
+    "ReadEndPoint.Ports.List": string[];
+    /**
+     * The address of the reader endpoint.
+     */
+    "ReaderEndPoint.Address": string;
+    /**
+     * The port used by the reader endpoint.
+     */
+    "ReaderEndPoint.Port": string;
+    /**
+     * The replication group identifier. This parameter is stored as a lowercase string.
+     *
+     * Constraints:
+     *
+     * - A name must contain from 1 to 40 alphanumeric characters or hyphens.
+     * - The first character must be a letter.
+     * - A name cannot end with a hyphen or contain two consecutive hyphens.
+     */
+    ReplicationGroupId: string;
+};
+/**
+ * The configuration details of the CloudWatch Logs destination. Note that this field is marked as required but only if CloudWatch Logs was chosen as the destination.
+ */
+export type CloudWatchLogsDestinationDetails = {
+    /**
+     * The name of the CloudWatch Logs log group.
+     */
+    LogGroup: string;
+};
+/**
+ * Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.
+ */
+export type DestinationDetails = {
+    /**
+     * The configuration details of the CloudWatch Logs destination. Note that this field is marked as required but only if CloudWatch Logs was chosen as the destination.
+     */
+    CloudWatchLogsDetails?: CloudWatchLogsDestinationDetails | undefined;
+    /**
+     * The configuration details of the Kinesis Data Firehose destination. Note that this field is marked as required but only if Kinesis Data Firehose was chosen as the destination.
+     */
+    KinesisFirehoseDetails?: KinesisFirehoseDestinationDetails | undefined;
+};
+/**
+ * The configuration details of the Kinesis Data Firehose destination. Note that this field is marked as required but only if Kinesis Data Firehose was chosen as the destination.
+ */
+export type KinesisFirehoseDestinationDetails = {
+    /**
+     * The name of the Kinesis Data Firehose delivery stream.
+     */
+    DeliveryStream: string;
+};
+/**
+ * Specifies the destination, format and type of the logs.
+ */
+export type LogDeliveryConfigurationRequest = {
+    /**
+     * Configuration details of either a CloudWatch Logs destination or Kinesis Data Firehose destination.
+     */
+    DestinationDetails: DestinationDetails;
+    /**
+     * Specify either CloudWatch Logs or Kinesis Data Firehose as the destination type. Valid values are either `cloudwatch-logs` or `kinesis-firehose` .
+     */
+    DestinationType: string;
+    /**
+     * Valid values are either `json` or `text` .
+     */
+    LogFormat: string;
+    /**
+     * Valid value is either `slow-log` , which refers to [slow-log](https://docs.aws.amazon.com/https://redis.io/commands/slowlog) or `engine-log` .
+     */
+    LogType: string;
+};
+/**
+ * `NodeGroupConfiguration` is a property of the `AWS::ElastiCache::ReplicationGroup` resource that configures an Amazon ElastiCache (ElastiCache) Valkey or Redis OSS cluster node group.
+ */
+export type NodeGroupConfiguration = {
+    /**
+     * Either the ElastiCache supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
+     */
+    NodeGroupId?: string | undefined;
+    /**
+     * The Availability Zone where the primary node of this node group (shard) is launched.
+     */
+    PrimaryAvailabilityZone?: string | undefined;
+    /**
+     * A list of Availability Zones to be used for the read replicas. The number of Availability Zones in this list must match the value of `ReplicaCount` or `ReplicasPerNodeGroup` if not specified.
+     */
+    ReplicaAvailabilityZones?: string[] | undefined;
+    /**
+     * The number of read replica nodes in this node group (shard).
+     */
+    ReplicaCount?: number | undefined;
+    /**
+     * A string of comma-separated values where the first set of values are the slot numbers (zero based), and the second set of values are the keyspaces for each slot. The following example specifies three slots (numbered 0, 1, and 2): `0,1,2,0-4999,5000-9999,10000-16,383` .
+     *
+     * If you don't specify a value, ElastiCache allocates keys equally among each slot.
+     *
+     * When you use an `UseOnlineResharding` update policy to update the number of node groups without interruption, ElastiCache evenly distributes the keyspaces between the specified number of slots. This cannot be updated later. Therefore, after updating the number of node groups in this way, you should remove the value specified for the `Slots` property of each `NodeGroupConfiguration` from the stack template, as it no longer reflects the actual values in each node group. For more information, see [UseOnlineResharding Policy](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding) .
+     */
+    Slots?: string | undefined;
+};
+//# sourceMappingURL=aws-elasticache-replicationgroup.d.ts.map

package/out/exports/resources.generated/aws-elasticache-securitygroup.d.ts

@@ -0,0 +1,21 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type ElastiCacheSecurityGroup = ResourceDefinitionWithAttributes<"AWS::ElastiCache::SecurityGroup", ElastiCacheSecurityGroupProps, ElastiCacheSecurityGroupAttribs>;
+/**
+ * The `AWS::ElastiCache::SecurityGroup` resource creates a cache security group. For more information about cache security groups, go to [CacheSecurityGroups](https://docs.aws.amazon.com/AmazonElastiCache/latest/dg/VPCs.html) in the *Amazon ElastiCache User Guide* or go to [CreateCacheSecurityGroup](https://docs.aws.amazon.com/AmazonElastiCache/latest/APIReference/API_CreateCacheSecurityGroup.html) in the *Amazon ElastiCache API Reference Guide* .
+ *
+ * For more information, see [CreateCacheSubnetGroup](https://docs.aws.amazon.com/AmazonElastiCache/latest/APIReference/API_CreateCacheSubnetGroup.html) .
+ */
+export type ElastiCacheSecurityGroupProps = {
+    /**
+     * A description for the cache security group.
+     */
+    Description: string;
+    /**
+     * A tag that can be added to an ElastiCache security group. Tags are composed of a Key/Value pair. You can use tags to categorize and track all your security groups. A tag with a null Value is permitted.
+     */
+    Tags?: Tag[] | undefined;
+};
+export type ElastiCacheSecurityGroupAttribs = {
+    Id: string;
+};
+//# sourceMappingURL=aws-elasticache-securitygroup.d.ts.map

package/out/exports/resources.generated/aws-elasticache-securitygroupingress.d.ts

@@ -0,0 +1,25 @@
+import type { ResourceDefinitionWithAttributes } from "../main.ts";
+export type ElastiCacheSecurityGroupIngress = ResourceDefinitionWithAttributes<"AWS::ElastiCache::SecurityGroupIngress", ElastiCacheSecurityGroupIngressProps, ElastiCacheSecurityGroupIngressAttribs>;
+/**
+ * The AWS::ElastiCache::SecurityGroupIngress type authorizes ingress to a cache security group from hosts in specified Amazon EC2 security groups. For more information about ElastiCache security group ingress, go to [AuthorizeCacheSecurityGroupIngress](https://docs.aws.amazon.com/AmazonElastiCache/latest/APIReference/API_AuthorizeCacheSecurityGroupIngress.html) in the *Amazon ElastiCache API Reference Guide* .
+ *
+ * > Updates are not supported.
+ */
+export type ElastiCacheSecurityGroupIngressProps = {
+    /**
+     * The name of the Cache Security Group to authorize.
+     */
+    CacheSecurityGroupName: string;
+    /**
+     * Name of the EC2 Security Group to include in the authorization.
+     */
+    EC2SecurityGroupName: string;
+    /**
+     * Specifies the Amazon Account ID of the owner of the EC2 security group specified in the EC2SecurityGroupName property. The Amazon access key ID is not an acceptable value.
+     */
+    EC2SecurityGroupOwnerId?: string | undefined;
+};
+export type ElastiCacheSecurityGroupIngressAttribs = {
+    Id: string;
+};
+//# sourceMappingURL=aws-elasticache-securitygroupingress.d.ts.map

package/out/exports/resources.generated/aws-elasticache-serverlesscache.d.ts

@@ -0,0 +1,158 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type ElastiCacheServerlessCache = ResourceDefinitionWithAttributes<"AWS::ElastiCache::ServerlessCache", ElastiCacheServerlessCacheProps, ElastiCacheServerlessCacheAttribs>;
+/**
+ * The resource representing a serverless cache.
+ */
+export type ElastiCacheServerlessCacheProps = {
+    /**
+     * The cache usage limit for the serverless cache.
+     */
+    CacheUsageLimits?: CacheUsageLimits | undefined;
+    /**
+     * The daily time that a cache snapshot will be created. Default is NULL, i.e. snapshots will not be created at a specific time on a daily basis. Available for Valkey, Redis OSS and Serverless Memcached only.
+     */
+    DailySnapshotTime?: string | undefined;
+    /**
+     * A description of the serverless cache.
+     */
+    Description?: string | undefined;
+    /**
+     * The engine the serverless cache is compatible with.
+     */
+    Engine: string;
+    /**
+     * The name of the final snapshot taken of a cache before the cache is deleted.
+     */
+    FinalSnapshotName?: string | undefined;
+    /**
+     * The ID of the AWS Key Management Service (KMS) key that is used to encrypt data at rest in the serverless cache.
+     */
+    KmsKeyId?: string | undefined;
+    /**
+     * The version number of the engine the serverless cache is compatible with.
+     */
+    MajorEngineVersion?: string | undefined;
+    /**
+     * Represents the information required for client programs to connect to a cache node. This value is read-only.
+     */
+    ReaderEndpoint?: Endpoint | undefined;
+    /**
+     * The IDs of the EC2 security groups associated with the serverless cache.
+     */
+    SecurityGroupIds?: string[] | undefined;
+    /**
+     * The unique identifier of the serverless cache.
+     */
+    ServerlessCacheName: string;
+    /**
+     * The ARN of the snapshot from which to restore data into the new cache.
+     */
+    SnapshotArnsToRestore?: string[] | undefined;
+    /**
+     * The current setting for the number of serverless cache snapshots the system will retain. Available for Valkey, Redis OSS and Serverless Memcached only.
+     */
+    SnapshotRetentionLimit?: number | undefined;
+    /**
+     * If no subnet IDs are given and your VPC is in us-west-1, then ElastiCache will select 2 default subnets across AZs in your VPC. For all other Regions, if no subnet IDs are given then ElastiCache will select 3 default subnets across AZs in your default VPC.
+     */
+    SubnetIds?: string[] | undefined;
+    /**
+     * A list of tags to be added to this resource.
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * The identifier of the user group associated with the serverless cache. Available for Valkey and Redis OSS only. Default is NULL.
+     */
+    UserGroupId?: string | undefined;
+};
+export type ElastiCacheServerlessCacheAttribs = {
+    /**
+     * The Amazon Resource Name (ARN) of the serverless cache.
+     */
+    ARN: string;
+    /**
+     * When the serverless cache was created.
+     */
+    CreateTime: string;
+    /**
+     * The DNS hostname of the cache node.
+     */
+    "Endpoint.Address": string;
+    /**
+     * The port number that the cache engine is listening on.
+     */
+    "Endpoint.Port": string;
+    /**
+     * The name and version number of the engine the serverless cache is compatible with.
+     */
+    FullEngineVersion: string;
+    /**
+     * The DNS hostname of the cache node.
+     */
+    "ReaderEndpoint.Address": string;
+    /**
+     * The port number that the cache engine is listening on.
+     */
+    "ReaderEndpoint.Port": string;
+    /**
+     * The current status of the serverless cache. The allowed values are CREATING, AVAILABLE, DELETING, CREATE-FAILED and MODIFYING.
+     */
+    Status: string;
+};
+/**
+ * The usage limits for storage and ElastiCache Processing Units for the cache.
+ */
+export type CacheUsageLimits = {
+    /**
+     * The maximum data storage limit in the cache, expressed in Gigabytes.
+     */
+    DataStorage?: DataStorage | undefined;
+    /**
+     * The number of ElastiCache Processing Units (ECPU) the cache can consume per second.
+     */
+    ECPUPerSecond?: ECPUPerSecond | undefined;
+};
+/**
+ * The data storage limit.
+ */
+export type DataStorage = {
+    /**
+     * The upper limit for data storage the cache is set to use.
+     */
+    Maximum?: number | undefined;
+    /**
+     * The lower limit for data storage the cache is set to use.
+     */
+    Minimum?: number | undefined;
+    /**
+     * The unit that the storage is measured in, in GB.
+     */
+    Unit: "GB";
+};
+/**
+ * The configuration for the number of ElastiCache Processing Units (ECPU) the cache can consume per second.
+ */
+export type ECPUPerSecond = {
+    /**
+     * The configuration for the maximum number of ECPUs the cache can consume per second.
+     */
+    Maximum?: number | undefined;
+    /**
+     * The configuration for the minimum number of ECPUs the cache should be able consume per second.
+     */
+    Minimum?: number | undefined;
+};
+/**
+ * Represents the information required for client programs to connect to a cache node. This value is read-only.
+ */
+export type Endpoint = {
+    /**
+     * The DNS hostname of the cache node.
+     */
+    Address?: string | undefined;
+    /**
+     * The port number that the cache engine is listening on.
+     */
+    Port?: string | undefined;
+};
+//# sourceMappingURL=aws-elasticache-serverlesscache.d.ts.map