@propulsionworks/cloudformation 0.0.1 → 0.1.0

package/out/exports/resources.generated/aws-mediatailor-channel.d.ts

@@ -0,0 +1,144 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type MediaTailorChannel = ResourceDefinitionWithAttributes<"AWS::MediaTailor::Channel", MediaTailorChannelProps, MediaTailorChannelAttribs>;
+/**
+ * The configuration parameters for a channel. For information about MediaTailor channels, see [Working with channels](https://docs.aws.amazon.com/mediatailor/latest/ug/channel-assembly-channels.html) in the *MediaTailor User Guide* .
+ */
+export type MediaTailorChannelProps = {
+    /**
+     * The list of audiences defined in channel.
+     */
+    Audiences?: string[] | undefined;
+    /**
+     * The name of the channel.
+     */
+    ChannelName: string;
+    /**
+     * The slate used to fill gaps between programs in the schedule. You must configure filler slate if your channel uses the `LINEAR` `PlaybackMode` . MediaTailor doesn't support filler slate for channels using the `LOOP` `PlaybackMode` .
+     */
+    FillerSlate?: SlateSource | undefined;
+    /**
+     * The log configuration.
+     */
+    LogConfiguration?: LogConfigurationForChannel | undefined;
+    /**
+     * The channel's output properties.
+     */
+    Outputs: RequestOutputItem[];
+    /**
+     * The type of playback mode for this channel.
+     *
+     * `LINEAR` - Programs play back-to-back only once.
+     *
+     * `LOOP` - Programs play back-to-back in an endless loop. When the last program in the schedule plays, playback loops back to the first program in the schedule.
+     */
+    PlaybackMode: PlaybackMode;
+    /**
+     * The tags to assign to the channel. Tags are key-value pairs that you can associate with Amazon resources to help with organization, access control, and cost tracking. For more information, see [Tagging AWS Elemental MediaTailor Resources](https://docs.aws.amazon.com/mediatailor/latest/ug/tagging.html) .
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * The tier for this channel. STANDARD tier channels can contain live programs.
+     */
+    Tier?: Tier | undefined;
+    /**
+     * The configuration for time-shifted viewing.
+     */
+    TimeShiftConfiguration?: TimeShiftConfiguration | undefined;
+};
+export type MediaTailorChannelAttribs = {
+    /**
+     * <p>The ARN of the channel.</p>
+     */
+    Arn: string;
+};
+export type AdMarkupType = "DATERANGE" | "SCTE35_ENHANCED";
+/**
+ * Dash manifest configuration parameters.
+ */
+export type DashPlaylistSettings = {
+    /**
+     * The total duration (in seconds) of each manifest. Minimum value: `30` seconds. Maximum value: `3600` seconds.
+     */
+    ManifestWindowSeconds?: number | undefined;
+    /**
+     * Minimum amount of content (measured in seconds) that a player must keep available in the buffer. Minimum value: `2` seconds. Maximum value: `60` seconds.
+     */
+    MinBufferTimeSeconds?: number | undefined;
+    /**
+     * Minimum amount of time (in seconds) that the player should wait before requesting updates to the manifest. Minimum value: `2` seconds. Maximum value: `60` seconds.
+     */
+    MinUpdatePeriodSeconds?: number | undefined;
+    /**
+     * Amount of time (in seconds) that the player should be from the live point at the end of the manifest. Minimum value: `2` seconds. Maximum value: `60` seconds.
+     */
+    SuggestedPresentationDelaySeconds?: number | undefined;
+};
+/**
+ * HLS playlist configuration parameters.
+ */
+export type HlsPlaylistSettings = {
+    /**
+     * Determines the type of SCTE 35 tags to use in ad markup. Specify `DATERANGE` to use `DATERANGE` tags (for live or VOD content). Specify `SCTE35_ENHANCED` to use `EXT-X-CUE-OUT` and `EXT-X-CUE-IN` tags (for VOD content only).
+     */
+    AdMarkupType?: AdMarkupType[] | undefined;
+    /**
+     * The total duration (in seconds) of each manifest. Minimum value: `30` seconds. Maximum value: `3600` seconds.
+     */
+    ManifestWindowSeconds?: number | undefined;
+};
+/**
+ * The log configuration for the channel.
+ */
+export type LogConfigurationForChannel = {
+    /**
+     * The log types.
+     */
+    LogTypes?: LogType[] | undefined;
+};
+export type LogType = "AS_RUN";
+export type PlaybackMode = "LOOP" | "LINEAR";
+/**
+ * The output configuration for this channel.
+ */
+export type RequestOutputItem = {
+    /**
+     * DASH manifest configuration parameters.
+     */
+    DashPlaylistSettings?: DashPlaylistSettings | undefined;
+    /**
+     * HLS playlist configuration parameters.
+     */
+    HlsPlaylistSettings?: HlsPlaylistSettings | undefined;
+    /**
+     * The name of the manifest for the channel. The name appears in the `PlaybackUrl` .
+     */
+    ManifestName: string;
+    /**
+     * A string used to match which `HttpPackageConfiguration` is used for each `VodSource` .
+     */
+    SourceGroup: string;
+};
+/**
+ * Slate VOD source configuration.
+ */
+export type SlateSource = {
+    /**
+     * The name of the source location where the slate VOD source is stored.
+     */
+    SourceLocationName?: string | undefined;
+    /**
+     * The slate VOD source name. The VOD source must already exist in a source location before it can be used for slate.
+     */
+    VodSourceName?: string | undefined;
+};
+export type Tier = "BASIC" | "STANDARD";
+/**
+ * The configuration for time-shifted viewing.
+ */
+export type TimeShiftConfiguration = {
+    /**
+     * The maximum time delay for time-shifted viewing. The minimum allowed maximum time delay is 0 seconds, and the maximum allowed maximum time delay is 21600 seconds (6 hours).
+     */
+    MaxTimeDelaySeconds: number;
+};
+//# sourceMappingURL=aws-mediatailor-channel.d.ts.map

package/out/exports/resources.generated/aws-mediatailor-channelpolicy.d.ts

@@ -0,0 +1,17 @@
+import type { ResourceDefinition, TemplatePolicyDocument } from "../main.ts";
+export type MediaTailorChannelPolicy = ResourceDefinition<"AWS::MediaTailor::ChannelPolicy", MediaTailorChannelPolicyProps>;
+/**
+ * Specifies an IAM policy for the channel. IAM policies are used to control access to your channel.
+ */
+export type MediaTailorChannelPolicyProps = {
+    /**
+     * The name of the channel associated with this Channel Policy.
+     */
+    ChannelName: string;
+    /**
+     * The IAM policy for the channel. IAM policies are used to control access to your channel.
+     * @policy
+     */
+    Policy: TemplatePolicyDocument;
+};
+//# sourceMappingURL=aws-mediatailor-channelpolicy.d.ts.map

package/out/exports/resources.generated/aws-mediatailor-livesource.d.ts

@@ -0,0 +1,48 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type MediaTailorLiveSource = ResourceDefinitionWithAttributes<"AWS::MediaTailor::LiveSource", MediaTailorLiveSourceProps, MediaTailorLiveSourceAttribs>;
+/**
+ * Live source configuration parameters.
+ */
+export type MediaTailorLiveSourceProps = {
+    /**
+     * The HTTP package configurations for the live source.
+     */
+    HttpPackageConfigurations: HttpPackageConfiguration[];
+    /**
+     * The name that's used to refer to a live source.
+     */
+    LiveSourceName: string;
+    /**
+     * The name of the source location.
+     */
+    SourceLocationName: string;
+    /**
+     * The tags assigned to the live source. Tags are key-value pairs that you can associate with Amazon resources to help with organization, access control, and cost tracking. For more information, see [Tagging AWS Elemental MediaTailor Resources](https://docs.aws.amazon.com/mediatailor/latest/ug/tagging.html) .
+     */
+    Tags?: Tag[] | undefined;
+};
+export type MediaTailorLiveSourceAttribs = {
+    /**
+     * <p>The ARN of the live source.</p>
+     */
+    Arn: string;
+};
+/**
+ * The HTTP package configuration properties for the requested VOD source.
+ */
+export type HttpPackageConfiguration = {
+    /**
+     * The relative path to the URL for this VOD source. This is combined with `SourceLocation::HttpConfiguration::BaseUrl` to form a valid URL.
+     */
+    Path: string;
+    /**
+     * The name of the source group. This has to match one of the `Channel::Outputs::SourceGroup` .
+     */
+    SourceGroup: string;
+    /**
+     * The streaming protocol for this package configuration. Supported values are `HLS` and `DASH` .
+     */
+    Type: Type;
+};
+export type Type = "DASH" | "HLS";
+//# sourceMappingURL=aws-mediatailor-livesource.d.ts.map

package/out/exports/resources.generated/aws-mediatailor-playbackconfiguration.d.ts

@@ -0,0 +1,194 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type MediaTailorPlaybackConfiguration = ResourceDefinitionWithAttributes<"AWS::MediaTailor::PlaybackConfiguration", MediaTailorPlaybackConfigurationProps, MediaTailorPlaybackConfigurationAttribs>;
+/**
+ * Adds a new playback configuration to AWS Elemental MediaTailor .
+ */
+export type MediaTailorPlaybackConfigurationProps = {
+    /**
+     * The setting that indicates what conditioning MediaTailor will perform on ads that the ad decision server (ADS) returns, and what priority MediaTailor uses when inserting ads.
+     */
+    AdConditioningConfiguration?: AdConditioningConfiguration | undefined;
+    /**
+     * The URL for the ad decision server (ADS). This includes the specification of static parameters and placeholders for dynamic parameters. AWS Elemental MediaTailor substitutes player-specific and session-specific parameters as needed when calling the ADS. Alternately, for testing you can provide a static VAST URL. The maximum length is 25,000 characters.
+     */
+    AdDecisionServerUrl: string;
+    /**
+     * The configuration for avail suppression, also known as ad suppression. For more information about ad suppression, see [Ad Suppression](https://docs.aws.amazon.com/mediatailor/latest/ug/ad-behavior.html) .
+     */
+    AvailSuppression?: AvailSuppression | undefined;
+    /**
+     * The configuration for bumpers. Bumpers are short audio or video clips that play at the start or before the end of an ad break. To learn more about bumpers, see [Bumpers](https://docs.aws.amazon.com/mediatailor/latest/ug/bumpers.html) .
+     */
+    Bumper?: Bumper | undefined;
+    /**
+     * The configuration for using a content delivery network (CDN), like Amazon CloudFront, for content and ad segment management.
+     */
+    CdnConfiguration?: CdnConfiguration | undefined;
+    /**
+     * The player parameters and aliases used as dynamic variables during session initialization. For more information, see [Domain Variables](https://docs.aws.amazon.com/mediatailor/latest/ug/variables-domain.html) .
+     */
+    ConfigurationAliases?: Record<string, Record<string, unknown>> | undefined;
+    /**
+     * The configuration for a DASH source.
+     */
+    DashConfiguration?: DashConfiguration | undefined;
+    /**
+     * The configuration for pre-roll ad insertion.
+     */
+    LivePreRollConfiguration?: LivePreRollConfiguration | undefined;
+    /**
+     * The configuration for manifest processing rules. Manifest processing rules enable customization of the personalized manifests created by MediaTailor.
+     */
+    ManifestProcessingRules?: ManifestProcessingRules | undefined;
+    /**
+     * The identifier for the playback configuration.
+     * @minLength 1
+     * @maxLength 64
+     * @pattern ^[a-zA-Z0-9_-]+$
+     */
+    Name: string;
+    /**
+     * Defines the maximum duration of underfilled ad time (in seconds) allowed in an ad break. If the duration of underfilled ad time exceeds the personalization threshold, then the personalization of the ad break is abandoned and the underlying content is shown. This feature applies to *ad replacement* in live and VOD streams, rather than ad insertion, because it relies on an underlying content stream. For more information about ad break behavior, including ad replacement and insertion, see [Ad Behavior in AWS Elemental MediaTailor](https://docs.aws.amazon.com/mediatailor/latest/ug/ad-behavior.html) .
+     */
+    PersonalizationThresholdSeconds?: number | undefined;
+    /**
+     * The URL for a video asset to transcode and use to fill in time that's not used by ads. AWS Elemental MediaTailor shows the slate to fill in gaps in media content. Configuring the slate is optional for non-VPAID playback configurations. For VPAID, the slate is required because MediaTailor provides it in the slots designated for dynamic ad content. The slate must be a high-quality asset that contains both audio and video.
+     */
+    SlateAdUrl?: string | undefined;
+    /**
+     * The tags to assign to the playback configuration. Tags are key-value pairs that you can associate with Amazon resources to help with organization, access control, and cost tracking. For more information, see [Tagging AWS Elemental MediaTailor Resources](https://docs.aws.amazon.com/mediatailor/latest/ug/tagging.html) .
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * The name that is used to associate this playback configuration with a custom transcode profile. This overrides the dynamic transcoding defaults of MediaTailor. Use this only if you have already set up custom profiles with the help of AWS Support.
+     */
+    TranscodeProfileName?: string | undefined;
+    /**
+     * The URL prefix for the parent manifest for the stream, minus the asset ID. The maximum length is 512 characters.
+     */
+    VideoContentSourceUrl: string;
+};
+export type MediaTailorPlaybackConfigurationAttribs = {
+    /**
+     * The URL generated by MediaTailor to initiate a playback session. The session uses server-side reporting. This setting is ignored in PUT operations.
+     */
+    "DashConfiguration.ManifestEndpointPrefix": string;
+    /**
+     * The URL that is used to initiate a playback session for devices that support Apple HLS. The session uses server-side reporting.
+     */
+    "HlsConfiguration.ManifestEndpointPrefix": string;
+    /**
+     * The Amazon Resource Name (ARN) for the playback configuration.
+     */
+    PlaybackConfigurationArn: string;
+    /**
+     * The URL that the player accesses to get a manifest from MediaTailor . This session will use server-side reporting.
+     */
+    PlaybackEndpointPrefix: string;
+    /**
+     * The URL that the player uses to initialize a session that uses client-side reporting.
+     */
+    SessionInitializationEndpointPrefix: string;
+};
+/**
+ * The setting that indicates what conditioning MediaTailor will perform on ads that the ad decision server (ADS) returns.
+ */
+export type AdConditioningConfiguration = {
+    /**
+     * For ads that have media files with streaming delivery and supported file extensions, indicates what transcoding action MediaTailor takes when it first receives these ads from the ADS. `TRANSCODE` indicates that MediaTailor must transcode the ads. `NONE` indicates that you have already transcoded the ads outside of MediaTailor and don't need them transcoded as part of the ad insertion workflow. For more information about ad conditioning see [Using preconditioned ads](https://docs.aws.amazon.com/mediatailor/latest/ug/precondition-ads.html) in the AWS Elemental MediaTailor user guide.
+     */
+    StreamingMediaFileConditioning: StreamingMediaFileConditioning;
+};
+/**
+ * For HLS, when set to `true` , MediaTailor passes through `EXT-X-CUE-IN` , `EXT-X-CUE-OUT` , and `EXT-X-SPLICEPOINT-SCTE35` ad markers from the origin manifest to the MediaTailor personalized manifest.
+ *
+ * No logic is applied to these ad markers. For example, if `EXT-X-CUE-OUT` has a value of `60` , but no ads are filled for that ad break, MediaTailor will not set the value to `0` .
+ */
+export type AdMarkerPassthrough = {
+    /**
+     * Enables ad marker passthrough for your configuration.
+     */
+    Enabled?: boolean | undefined;
+};
+/**
+ * The configuration for avail suppression, also known as ad suppression. For more information about ad suppression, see [Ad Suppression](https://docs.aws.amazon.com/mediatailor/latest/ug/ad-behavior.html) .
+ */
+export type AvailSuppression = {
+    /**
+     * Defines the policy to apply to the avail suppression mode. `BEHIND_LIVE_EDGE` will always use the full avail suppression policy. `AFTER_LIVE_EDGE` mode can be used to invoke partial ad break fills when a session starts mid-break.
+     */
+    FillPolicy?: "PARTIAL_AVAIL" | "FULL_AVAIL_ONLY" | undefined;
+    /**
+     * Sets the ad suppression mode. By default, ad suppression is off and all ad breaks are filled with ads or slate. When Mode is set to `BEHIND_LIVE_EDGE` , ad suppression is active and MediaTailor won't fill ad breaks on or behind the ad suppression Value time in the manifest lookback window. When Mode is set to `AFTER_LIVE_EDGE` , ad suppression is active and MediaTailor won't fill ad breaks that are within the live edge plus the avail suppression value.
+     */
+    Mode?: "OFF" | "BEHIND_LIVE_EDGE" | "AFTER_LIVE_EDGE" | undefined;
+    /**
+     * A live edge offset time in HH:MM:SS. MediaTailor won't fill ad breaks on or behind this time in the manifest lookback window. If Value is set to 00:00:00, it is in sync with the live edge, and MediaTailor won't fill any ad breaks on or behind the live edge. If you set a Value time, MediaTailor won't fill any ad breaks on or behind this time in the manifest lookback window. For example, if you set 00:45:00, then MediaTailor will fill ad breaks that occur within 45 minutes behind the live edge, but won't fill ad breaks on or behind 45 minutes behind the live edge.
+     */
+    Value?: string | undefined;
+};
+/**
+ * The configuration for bumpers. Bumpers are short audio or video clips that play at the start or before the end of an ad break. To learn more about bumpers, see [Bumpers](https://docs.aws.amazon.com/mediatailor/latest/ug/bumpers.html) .
+ */
+export type Bumper = {
+    /**
+     * The URL for the end bumper asset.
+     */
+    EndUrl?: string | undefined;
+    /**
+     * The URL for the start bumper asset.
+     */
+    StartUrl?: string | undefined;
+};
+/**
+ * The configuration for using a content delivery network (CDN), like Amazon CloudFront, for content and ad segment management.
+ */
+export type CdnConfiguration = {
+    /**
+     * A non-default content delivery network (CDN) to serve ad segments. By default, AWS Elemental MediaTailor uses Amazon CloudFront with default cache settings as its CDN for ad segments. To set up an alternate CDN, create a rule in your CDN for the origin ads.mediatailor. *<region>* .amazonaws.com. Then specify the rule's name in this `AdSegmentUrlPrefix` . When AWS Elemental MediaTailor serves a manifest, it reports your CDN as the source for ad segments.
+     */
+    AdSegmentUrlPrefix?: string | undefined;
+    /**
+     * A content delivery network (CDN) to cache content segments, so that content requests don’t always have to go to the origin server. First, create a rule in your CDN for the content segment origin server. Then specify the rule's name in this `ContentSegmentUrlPrefix` . When AWS Elemental MediaTailor serves a manifest, it reports your CDN as the source for content segments.
+     */
+    ContentSegmentUrlPrefix?: string | undefined;
+};
+/**
+ * The configuration for DASH content.
+ */
+export type DashConfiguration = {
+    /**
+     * The setting that controls whether MediaTailor includes the Location tag in DASH manifests. MediaTailor populates the Location tag with the URL for manifest update requests, to be used by players that don't support sticky redirects. Disable this if you have CDN routing rules set up for accessing MediaTailor manifests, and you are either using client-side reporting or your players support sticky HTTP redirects. Valid values are `DISABLED` and `EMT_DEFAULT` . The `EMT_DEFAULT` setting enables the inclusion of the tag and is the default value.
+     */
+    MpdLocation?: string | undefined;
+    /**
+     * The setting that controls whether MediaTailor handles manifests from the origin server as multi-period manifests or single-period manifests. If your origin server produces single-period manifests, set this to `SINGLE_PERIOD` . The default setting is `MULTI_PERIOD` . For multi-period manifests, omit this setting or set it to `MULTI_PERIOD` .
+     */
+    OriginManifestType?: "SINGLE_PERIOD" | "MULTI_PERIOD" | undefined;
+};
+/**
+ * The configuration for pre-roll ad insertion.
+ */
+export type LivePreRollConfiguration = {
+    /**
+     * The URL for the ad decision server (ADS) for pre-roll ads. This includes the specification of static parameters and placeholders for dynamic parameters. AWS Elemental MediaTailor substitutes player-specific and session-specific parameters as needed when calling the ADS. Alternately, for testing, you can provide a static VAST URL. The maximum length is 25,000 characters.
+     */
+    AdDecisionServerUrl?: string | undefined;
+    /**
+     * The maximum allowed duration for the pre-roll ad avail. AWS Elemental MediaTailor won't play pre-roll ads to exceed this duration, regardless of the total duration of ads that the ADS returns.
+     */
+    MaxDurationSeconds?: number | undefined;
+};
+/**
+ * The configuration for manifest processing rules. Manifest processing rules enable customization of the personalized manifests created by MediaTailor.
+ */
+export type ManifestProcessingRules = {
+    /**
+     * For HLS, when set to `true` , MediaTailor passes through `EXT-X-CUE-IN` , `EXT-X-CUE-OUT` , and `EXT-X-SPLICEPOINT-SCTE35` ad markers from the origin manifest to the MediaTailor personalized manifest.
+     *
+     * No logic is applied to these ad markers. For example, if `EXT-X-CUE-OUT` has a value of `60` , but no ads are filled for that ad break, MediaTailor will not set the value to `0` .
+     */
+    AdMarkerPassthrough?: AdMarkerPassthrough | undefined;
+};
+export type StreamingMediaFileConditioning = "TRANSCODE" | "NONE";
+//# sourceMappingURL=aws-mediatailor-playbackconfiguration.d.ts.map

package/out/exports/resources.generated/aws-mediatailor-sourcelocation.d.ts

@@ -0,0 +1,110 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type MediaTailorSourceLocation = ResourceDefinitionWithAttributes<"AWS::MediaTailor::SourceLocation", MediaTailorSourceLocationProps, MediaTailorSourceLocationAttribs>;
+/**
+ * A source location is a container for sources. For more information about source locations, see [Working with source locations](https://docs.aws.amazon.com/mediatailor/latest/ug/channel-assembly-source-locations.html) in the *MediaTailor User Guide* .
+ */
+export type MediaTailorSourceLocationProps = {
+    /**
+     * The access configuration for the source location.
+     */
+    AccessConfiguration?: AccessConfiguration | undefined;
+    /**
+     * The default segment delivery configuration.
+     */
+    DefaultSegmentDeliveryConfiguration?: DefaultSegmentDeliveryConfiguration | undefined;
+    /**
+     * The HTTP configuration for the source location.
+     */
+    HttpConfiguration: HttpConfiguration;
+    /**
+     * The segment delivery configurations for the source location.
+     */
+    SegmentDeliveryConfigurations?: SegmentDeliveryConfiguration[] | undefined;
+    /**
+     * The name of the source location.
+     */
+    SourceLocationName: string;
+    /**
+     * The tags assigned to the source location. Tags are key-value pairs that you can associate with Amazon resources to help with organization, access control, and cost tracking. For more information, see [Tagging AWS Elemental MediaTailor Resources](https://docs.aws.amazon.com/mediatailor/latest/ug/tagging.html) .
+     */
+    Tags?: Tag[] | undefined;
+};
+export type MediaTailorSourceLocationAttribs = {
+    /**
+     * <p>The ARN of the source location.</p>
+     */
+    Arn: string;
+};
+/**
+ * Access configuration parameters.
+ */
+export type AccessConfiguration = {
+    /**
+     * The type of authentication used to access content from `HttpConfiguration::BaseUrl` on your source location. Accepted value: `S3_SIGV4` .
+     *
+     * `S3_SIGV4` - AWS Signature Version 4 authentication for Amazon S3 hosted virtual-style access. If your source location base URL is an Amazon S3 bucket, MediaTailor can use AWS Signature Version 4 (SigV4) authentication to access the bucket where your source content is stored. Your MediaTailor source location baseURL must follow the S3 virtual hosted-style request URL format. For example, https://bucket-name.s3.Region.amazonaws.com/key-name.
+     *
+     * Before you can use `S3_SIGV4` , you must meet these requirements:
+     *
+     * • You must allow MediaTailor to access your S3 bucket by granting mediatailor.amazonaws.com principal access in IAM. For information about configuring access in IAM, see Access management in the IAM User Guide.
+     *
+     * • The mediatailor.amazonaws.com service principal must have permissions to read all top level manifests referenced by the VodSource packaging configurations.
+     *
+     * • The caller of the API must have s3:GetObject IAM permissions to read all top level manifests referenced by your MediaTailor VodSource packaging configurations.
+     */
+    AccessType?: AccessType | undefined;
+    /**
+     * AWS Secrets Manager access token configuration parameters.
+     */
+    SecretsManagerAccessTokenConfiguration?: SecretsManagerAccessTokenConfiguration | undefined;
+};
+export type AccessType = "S3_SIGV4" | "SECRETS_MANAGER_ACCESS_TOKEN" | "AUTODETECT_SIGV4";
+/**
+ * The optional configuration for a server that serves segments. Use this if you want the segment delivery server to be different from the source location server. For example, you can configure your source location server to be an origination server, such as MediaPackage, and the segment delivery server to be a content delivery network (CDN), such as CloudFront. If you don't specify a segment delivery server, then the source location server is used.
+ */
+export type DefaultSegmentDeliveryConfiguration = {
+    /**
+     * The hostname of the server that will be used to serve segments. This string must include the protocol, such as *https://* .
+     */
+    BaseUrl?: string | undefined;
+};
+/**
+ * The HTTP configuration for the source location.
+ */
+export type HttpConfiguration = {
+    /**
+     * The base URL for the source location host server. This string must include the protocol, such as *https://* .
+     */
+    BaseUrl: string;
+};
+/**
+ * AWS Secrets Manager access token configuration parameters. For information about Secrets Manager access token authentication, see [Working with AWS Secrets Manager access token authentication](https://docs.aws.amazon.com/mediatailor/latest/ug/channel-assembly-access-configuration-access-token.html) .
+ */
+export type SecretsManagerAccessTokenConfiguration = {
+    /**
+     * The name of the HTTP header used to supply the access token in requests to the source location.
+     */
+    HeaderName?: string | undefined;
+    /**
+     * The Amazon Resource Name (ARN) of the AWS Secrets Manager secret that contains the access token.
+     */
+    SecretArn?: string | undefined;
+    /**
+     * The AWS Secrets Manager [SecretString](https://docs.aws.amazon.com/secretsmanager/latest/apireference/API_CreateSecret.html#SecretsManager-CreateSecret-request-SecretString.html) key associated with the access token. MediaTailor uses the key to look up SecretString key and value pair containing the access token.
+     */
+    SecretStringKey?: string | undefined;
+};
+/**
+ * The segment delivery configuration settings.
+ */
+export type SegmentDeliveryConfiguration = {
+    /**
+     * The base URL of the host or path of the segment delivery server that you're using to serve segments. This is typically a content delivery network (CDN). The URL can be absolute or relative. To use an absolute URL include the protocol, such as `https://example.com/some/path` . To use a relative URL specify the relative path, such as `/some/path*` .
+     */
+    BaseUrl?: string | undefined;
+    /**
+     * A unique identifier used to distinguish between multiple segment delivery configurations in a source location.
+     */
+    Name?: string | undefined;
+};
+//# sourceMappingURL=aws-mediatailor-sourcelocation.d.ts.map

package/out/exports/resources.generated/aws-mediatailor-vodsource.d.ts

@@ -0,0 +1,48 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type MediaTailorVodSource = ResourceDefinitionWithAttributes<"AWS::MediaTailor::VodSource", MediaTailorVodSourceProps, MediaTailorVodSourceAttribs>;
+/**
+ * The VOD source configuration parameters.
+ */
+export type MediaTailorVodSourceProps = {
+    /**
+     * The HTTP package configurations for the VOD source.
+     */
+    HttpPackageConfigurations: HttpPackageConfiguration[];
+    /**
+     * The name of the source location that the VOD source is associated with.
+     */
+    SourceLocationName: string;
+    /**
+     * The tags assigned to the VOD source. Tags are key-value pairs that you can associate with Amazon resources to help with organization, access control, and cost tracking. For more information, see [Tagging AWS Elemental MediaTailor Resources](https://docs.aws.amazon.com/mediatailor/latest/ug/tagging.html) .
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * The name of the VOD source.
+     */
+    VodSourceName: string;
+};
+export type MediaTailorVodSourceAttribs = {
+    /**
+     * <p>The ARN of the VOD source.</p>
+     */
+    Arn: string;
+};
+/**
+ * The HTTP package configuration properties for the requested VOD source.
+ */
+export type HttpPackageConfiguration = {
+    /**
+     * The relative path to the URL for this VOD source. This is combined with `SourceLocation::HttpConfiguration::BaseUrl` to form a valid URL.
+     */
+    Path: string;
+    /**
+     * The name of the source group. This has to match one of the `Channel::Outputs::SourceGroup` .
+     */
+    SourceGroup: string;
+    /**
+     * The streaming protocol for this package configuration. Supported values are `HLS` and `DASH` .
+     */
+    Type: Type;
+};
+export type Type = "DASH" | "HLS";
+//# sourceMappingURL=aws-mediatailor-vodsource.d.ts.map

package/out/exports/resources.generated/aws-memorydb-acl.d.ts

@@ -0,0 +1,35 @@
+import type { ResourceDefinitionWithAttributes, Tag } from "../main.ts";
+export type MemoryDBACL = ResourceDefinitionWithAttributes<"AWS::MemoryDB::ACL", MemoryDBACLProps, MemoryDBACLAttribs>;
+/**
+ * Specifies an Access Control List. For more information, see [Authenticating users with Access Contol Lists (ACLs)](https://docs.aws.amazon.com/memorydb/latest/devguide/clusters.acls.html) .
+ */
+export type MemoryDBACLProps = {
+    /**
+     * The name of the Access Control List.
+     * @pattern [a-z][a-z0-9\\-]*
+     */
+    ACLName: string;
+    /**
+     * An array of key-value pairs to apply to this resource.
+     *
+     * For more information, see [Tag](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-resource-tags.html) .
+     */
+    Tags?: Tag[] | undefined;
+    /**
+     * The list of users that belong to the Access Control List.
+     */
+    UserNames?: string[] | undefined;
+};
+export type MemoryDBACLAttribs = {
+    /**
+     * When you pass the logical ID of this resource to the intrinsic `Ref` function, Ref returns the ARN of the Access Control List, such as `arn:aws:memorydb:us-east-1:123456789012:acl/my-acl`
+     */
+    Arn: string;
+    /**
+     * Indicates ACL status.
+     *
+     * *Valid values* : `creating` | `active` | `modifying` | `deleting`
+     */
+    Status: string;
+};
+//# sourceMappingURL=aws-memorydb-acl.d.ts.map