@project-chip/matter.js 0.4.0 → 0.5.0

package/dist/cjs/cluster/definitions/NetworkCommissioningCluster.d.ts

@@ -0,0 +1,2146 @@
+/**
+ * @license
+ * Copyright 2022-2023 Project CHIP Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+import { BaseClusterComponent, ClusterComponent, ExtensibleCluster, ClusterForBaseCluster, AsConditional } from "../../cluster/ClusterFactory.js";
+import { BitFlag, BitFlags, TypeFromPartialBitSchema } from "../../schema/BitmapSchema.js";
+import { FixedAttribute, Attribute, WritableAttribute, Command, Cluster as CreateCluster } from "../../cluster/Cluster.js";
+export declare namespace NetworkCommissioning {
+    /**
+     * NetworkInfoStruct struct describes an existing network configuration, as provided in the Networks attribute.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4
+     */
+    const TlvNetworkInfoStruct: import("../../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * Every network is uniquely identified (for purposes of commissioning) by a NetworkID mapping to the following
+         * technology-specific properties:
+         *
+         *   • SSID for Wi-Fi
+         *
+         *   • Extended PAN ID for Thread
+         *
+         *   • Network interface instance name at operating system (or equivalent unique name) for Ethernet.
+         *
+         * The semantics of the NetworkID field therefore varies between network types accordingly. It contains SSID
+         * for Wi-Fi networks, Extended PAN ID (XPAN ID) for Thread networks and netif name for Ethernet networks.
+         *
+         * NOTE
+         *
+         * SSID in Wi-Fi is a collection of 1-32 bytes, the text encoding of which is not specified. Implementations
+         * must be careful to support reporting byte strings without requiring a particular encoding for transfer. Only
+         * the commissioner should try to potentially decode the bytes. The most common encoding is UTF-8, however this
+         * is just a convention. Some configurations may use Latin-1 or other character sets. A commissioner may decode
+         * using UTF-8, replacing encoding errors with "?" at the application level while retaining the underlying
+         * representation.
+         *
+         * XPAN ID is a big-endian 64-bit unsigned number, represented on the first 8 octets of the octet string.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.1
+         */
+        networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        /**
+         * This field shall indicate the connected status of the associated network, where "connected" means currently
+         * linked to the network technology (e.g. Associated for a Wi-Fi network, media connected for an Ethernet
+         * network).
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.2
+         */
+        connected: import("../../tlv/TlvObject.js").FieldType<boolean>;
+    }>;
+    /**
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.3
+     */
+    const enum NetworkCommissioningStatus {
+        /**
+         * OK, no error
+         */
+        Success = 0,
+        /**
+         * Value Outside Range
+         */
+        OutOfRange = 1,
+        /**
+         * A collection would exceed its size limit
+         */
+        BoundsExceeded = 2,
+        /**
+         * The NetworkID is not among the collection of added networks
+         */
+        NetworkIdNotFound = 3,
+        /**
+         * The NetworkID is already among the collection of added networks
+         */
+        DuplicateNetworkId = 4,
+        /**
+         * Cannot find AP: SSID Not found
+         */
+        NetworkNotFound = 5,
+        /**
+         * Cannot find AP: Mismatch on band/channels/regulatory domain / 2.4GHz vs 5GHz
+         */
+        RegulatoryError = 6,
+        /**
+         * Cannot associate due to authentication failure
+         */
+        AuthFailure = 7,
+        /**
+         * Cannot associate due to unsupported security mode
+         */
+        UnsupportedSecurity = 8,
+        /**
+         * Other association failure
+         */
+        OtherConnectionFailure = 9,
+        /**
+         * Failure to generate an IPv6 address
+         */
+        Ipv6Failed = 10,
+        /**
+         * Failure to bind Wi-Fi <-> IP interfaces
+         */
+        IpBindFailed = 11,
+        /**
+         * Unknown error
+         */
+        UnknownError = 12
+    }
+    /**
+     * Input to the NetworkCommissioning scanNetworks command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1
+     */
+    const TlvScanNetworksRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * This field, if present, shall contain the SSID for a directed scan of that particular Wi-Fi SSID. Otherwise,
+         * if the field is absent, or it is null, this shall indicate scanning of all BSSID in range. This field shall
+         * be ignored for ScanNetworks invocations on non-Wi-Fi server instances.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1.1
+         */
+        ssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array | null>;
+        /**
+         * The Breadcrumb field, if present, shall be used to atomically set the Breadcrumb attribute in the General
+         * Commissioning cluster on success of the associated command. If the command fails, the Breadcrumb attribute
+         * in the General Commissioning cluster shall be left unchanged.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1.2
+         */
+        breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+    }>;
+    /**
+     * WiFiSecurityBitmap encodes the supported Wi-Fi security types present in the Security field of the
+     * WiFiInterfaceScanResultStruct.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.1
+     */
+    const WiFiSecurityBitmap: {
+        /**
+         * Supports unencrypted Wi-Fi
+         */
+        unencrypted: BitFlag;
+        /**
+         * Supports Wi-Fi using WEP security
+         */
+        wep: BitFlag;
+        /**
+         * Supports Wi-Fi using WPA-Personal security
+         */
+        wpaPersonal: BitFlag;
+        /**
+         * Supports Wi-Fi using WPA2-Personal security
+         */
+        wpa2Personal: BitFlag;
+        /**
+         * Supports Wi-Fi using WPA3-Personal security
+         */
+        wpa3Personal: BitFlag;
+    };
+    /**
+     * WiFiBandEnum encodes a supported Wi-Fi frequency band present in the WiFiBand field of the
+     * WiFiInterfaceScanResultStruct.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.2
+     */
+    const enum WiFiBand {
+        /**
+         * 2.4GHz - 2.401GHz to2.495GHz(802.11b/g/n/ax)
+         */
+        "2G4" = 0,
+        /**
+         * 3.65GHz - 3.655GHz to3.695GHz (802.11y)
+         */
+        "3G65" = 1,
+        /**
+         * 5GHz - 5.150GHz to5.895GHz(802.11a/n/ac/ax)
+         */
+        "5G" = 2,
+        /**
+         * 6GHz - 5.925GHz to7.125GHz (802.11ax / WiFi 6E)
+         */
+        "6G" = 3,
+        /**
+         * 60GHz - 57.24GHz to70.20GHz (802.11ad/ay)
+         */
+        "60G" = 4
+    }
+    /**
+     * WiFiInterfaceScanResultStruct represents a single Wi-Fi network scan result.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5
+     */
+    const TlvWiFiInterfaceScanResultStruct: import("../../tlv/TlvObject.js").ObjectSchema<{
+        security: import("../../tlv/TlvObject.js").OptionalFieldType<TypeFromPartialBitSchema<{
+            /**
+             * Supports unencrypted Wi-Fi
+             */
+            unencrypted: BitFlag;
+            /**
+             * Supports Wi-Fi using WEP security
+             */
+            wep: BitFlag;
+            /**
+             * Supports Wi-Fi using WPA-Personal security
+             */
+            wpaPersonal: BitFlag;
+            /**
+             * Supports Wi-Fi using WPA2-Personal security
+             */
+            wpa2Personal: BitFlag;
+            /**
+             * Supports Wi-Fi using WPA3-Personal security
+             */
+            wpa3Personal: BitFlag;
+        }>>;
+        ssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+        bssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+        channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        /**
+         * This field, if present, may be used to differentiate overlapping channel number values across different
+         * Wi-Fi frequency bands.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.1
+         */
+        wiFiBand: import("../../tlv/TlvObject.js").OptionalFieldType<WiFiBand>;
+        /**
+         * This field, if present, shall denote the signal strength in dBm of the associated scan result.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.2
+         */
+        rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * ThreadInterfaceScanResultStruct represents a single Thread network scan result.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.6
+     */
+    const TlvThreadInterfaceScanResultStruct: import("../../tlv/TlvObject.js").ObjectSchema<{
+        panId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        extendedPanId: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        networkName: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+        channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        version: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        /**
+         * ExtendedAddress stands for an IEEE 802.15.4 Extended Address.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.6.1
+         */
+        extendedAddress: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+        rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        lqi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * This command shall contain the status of the last ScanNetworks command, and the associated scan results if the
+     * operation was successful.
+     *
+     * Results are valid only if NetworkingStatus is Success.
+     *
+     * Before generating a ScanNetworksResponse, the server shall set the LastNetworkingStatus attribute value to the
+     * NetworkingStatus matching the response.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2
+     */
+    const TlvScanNetworksResponse: import("../../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * The NetworkingStatus field shall indicate the status of the last scan operation, taking one of these values:
+         *
+         *   • Success: Scanning succeeded.
+         *
+         *   • NetworkNotFound: No instance of an explicitly-provided network identifier was found during the scan.
+         *     This error cannot occur if no network identifier was provided, such as when scanning for all available
+         *     networks.
+         *
+         *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+         *
+         *   • RegulatoryError: Could not scan on any bands due to lack of regulatory configuration.
+         *
+         *   • UnknownError: An internal error occurred during scanning.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.1
+         */
+        networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+        /**
+         * This field, if present and non-empty, may contain error information which may be communicated to the user in
+         * case the NetworkingStatus was not Success. Its purpose is to help developers in troubleshooting errors and
+         * may go into logs or crash reports.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.2
+         */
+        debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+        /**
+         * If NetworkingStatus was Success, this field shall contain the Wi-Fi network scan results. The list may be
+         * empty if none were found in range on the bands supported by the interface, or if directed scanning had been
+         * used and the desired SSID was not found in range.
+         *
+         * The maximum number of results present in the result list supported may depend on memory and may contain a
+         * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+         * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+         *
+         * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+         * RSSI order, even if RSSI is not reported in the response, to maximize the likelihood that most likely to be
+         * reachable elements are included within the size limits of the response.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.3
+         */
+        wiFiScanResults: import("../../tlv/TlvObject.js").OptionalFieldType<import("../../tlv/TlvObject.js").TypeFromFields<{
+            security: import("../../tlv/TlvObject.js").OptionalFieldType<TypeFromPartialBitSchema<{
+                /**
+                 * Supports unencrypted Wi-Fi
+                 */
+                unencrypted: BitFlag;
+                /**
+                 * Supports Wi-Fi using WEP security
+                 */
+                wep: BitFlag;
+                /**
+                 * Supports Wi-Fi using WPA-Personal security
+                 */
+                wpaPersonal: BitFlag;
+                /**
+                 * Supports Wi-Fi using WPA2-Personal security
+                 */
+                wpa2Personal: BitFlag;
+                /**
+                 * Supports Wi-Fi using WPA3-Personal security
+                 */
+                wpa3Personal: BitFlag;
+            }>>;
+            ssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+            bssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+            channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            /**
+             * This field, if present, may be used to differentiate overlapping channel number values across different
+             * Wi-Fi frequency bands.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.1
+             */
+            wiFiBand: import("../../tlv/TlvObject.js").OptionalFieldType<WiFiBand>;
+            /**
+             * This field, if present, shall denote the signal strength in dBm of the associated scan result.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.2
+             */
+            rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>[]>;
+        /**
+         * If NetworkingStatus was Success, this field shall contain the Thread network scan results. The list may be
+         * empty if none were found in range on the bands supported by the interface.
+         *
+         * The maximum number of results present in the result list supported may depend on memory and may contain a
+         * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+         * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+         *
+         * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+         * LQI order, to maximize the likelihood that most likely to be reachable elements are included within the size
+         * limits of the response.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.4
+         */
+        threadScanResults: import("../../tlv/TlvObject.js").OptionalFieldType<import("../../tlv/TlvObject.js").TypeFromFields<{
+            panId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            extendedPanId: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+            networkName: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            version: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            /**
+             * ExtendedAddress stands for an IEEE 802.15.4 Extended Address.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.6.1
+             */
+            extendedAddress: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+            rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            lqi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>[]>;
+    }>;
+    /**
+     * Input to the NetworkCommissioning removeNetwork command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.7
+     */
+    const TlvRemoveNetworkRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+    }>;
+    /**
+     * This response command relates status information for some commands which require it as their response command.
+     * See each individual cluster server command for the situations that may cause a NetworkingStatus different than
+     * Success.
+     *
+     * Before generating a NetworkConfigResponse, the server shall set the LastNetworkingStatus attribute value to the
+     * NetworkingStatus matching the response.
+     *
+     * Before generating a NetworkConfigResponse, the server shall set the LastNetworkID attribute value to the
+     * NetworkID that was used in the command for which an invocation caused the response to be generated.
+     *
+     * The NetworkingStatus field shall indicate the status of the last operation attempting to modify the Networks
+     * attribute configuration, taking one of these values:
+     *
+     *   • Success: Operation succeeded.
+     *
+     *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+     *
+     *   • BoundsExceeded: Adding this network configuration would exceed the limit defined by Section 11.8.6.1,
+     *     “MaxNetworks Attribute”.
+     *
+     *   • NetworkIdNotFound: The network identifier was expected to be found, but was not found among the added
+     *     network configurations in Networks attribute.
+     *
+     *   • UnknownError: An internal error occurred during the operation.
+     *
+     * See Section 11.8.7.2.2, “DebugText Field” for usage.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8
+     */
+    const TlvNetworkConfigResponse: import("../../tlv/TlvObject.js").ObjectSchema<{
+        networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+        debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+        /**
+         * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+         * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+         * request command.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+         */
+        networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the NetworkCommissioning connectNetwork command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.9
+     */
+    const TlvConnectNetworkRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+    }>;
+    /**
+     * Before generating a ConnectNetworkResponse, the server shall:
+     *
+     *   • Set the LastNetworkingStatus attribute value to the NetworkingStatus matching the response.
+     *
+     *   • Set the LastNetworkID attribute value to the NetworkID that was used in the ConnectNetwork command which
+     *     caused the response to be generated.
+     *
+     *   • Set the LastConnectErrorValue attribute value to the ErrorValue matching the response, including setting it
+     *     to null if the ErrorValue is not applicable.
+     *
+     * The NetworkingStatus field shall indicate the status of the last connection attempt, taking one of these values:
+     *
+     *   • Success: Connection succeeded.
+     *
+     *   • NetworkNotFound: No instance of an explicitly-provided network identifier was found during the attempt to
+     *     join the network.
+     *
+     *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+     *
+     *   • NetworkIdNotFound: The network identifier was not found among the added network configurations in Networks
+     *     attribute.
+     *
+     *   • RegulatoryError: Could not connect to a network due to lack of regulatory configuration.
+     *
+     *   • UnknownError: An internal error occurred during the operation.
+     *
+     *   • Association errors (see also description of errors in Section 11.8.5.3, “NetworkCommissioningStatusEnum”):
+     *     AuthFailure, UnsupportedSecurity, OtherConnectionFailure, IPV6Failed, IPBindFailed
+     *
+     * See Section 11.8.7.2.2, “DebugText Field” for usage.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.10
+     */
+    const TlvConnectNetworkResponse: import("../../tlv/TlvObject.js").ObjectSchema<{
+        networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+        debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+        /**
+         *   • ErrorValue interpretation for Wi-Fi association errors:
+         *
+         *     ◦ On any association failure during enabling of a network, the ErrorValue field shall be set to the
+         *       Status Code value that was present in the last frame related to association where Status Code was not
+         *       equal to zero and which caused the failure of a final retry attempt, if this final failure was due to
+         *       one of the following Management frames:
+         *
+         *       ▪ Association Response (Type 0, Subtype 1)
+         *
+         *       ▪ Reassociation Response (Type 0, Subtype 3)
+         *
+         *       ▪ Authentication (Type 0, Subtype 11)
+         *
+         *     ◦ Table 9-50 "Status Codes" in IEEE 802.11-2020 contains a description of all values possible, which can
+         *       unambiguously be used to determine the cause, such as an invalid security type, unsupported rate, etc.
+         *
+         *   • Otherwise, the ErrorValue field shall contain an implementation-dependent value which may be used by a
+         *     reader of the structure to record, report or diagnose the failure.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.10.1
+         */
+        errorValue: import("../../tlv/TlvObject.js").FieldType<number | null>;
+    }>;
+    /**
+     * Input to the NetworkCommissioning reorderNetwork command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.11
+     */
+    const TlvReorderNetworkRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        networkIndex: import("../../tlv/TlvObject.js").FieldType<number>;
+        breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+    }>;
+    /**
+     * Input to the NetworkCommissioning addOrUpdateWiFiNetwork command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.3
+     */
+    const TlvAddOrUpdateWiFiNetworkRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        ssid: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        /**
+         * Credentials is the passphrase or PSK for the network (if any is needed).
+         *
+         * Security type, cipher and credential format (passphrase or PSK) shall be contextually auto- selected during
+         * execution of the ConnectNetwork Command and during subsequent operational state network connections, based
+         * on the most secure Wi-Fi security type available within beacons and probe responses for the set of all
+         * discovered BSSIDs for the configured SSID. The type of PSK or passphrase used shall be inferred based on the
+         * length and contents of the Credentials field provided, matching the security type chosen.
+         *
+         * Valid Credentials length are:
+         *
+         *   • 0 bytes: Unsecured (open) connection
+         *
+         *   • 5 bytes: WEP-64 passphrase
+         *
+         *   • 10 hexadecimal ASCII characters: WEP-64 40-bit hex raw PSK
+         *
+         *   • 13 bytes: WEP-128 passphrase
+         *
+         *   • 26 hexadecimal ASCII characters: WEP-128 104-bit hex raw PSK
+         *
+         *   • 8..63 bytes: WPA/WPA2/WPA3 passphrase
+         *
+         *   • 64 bytes: WPA/WPA2/WPA3 raw hex PSK
+         *
+         * These lengths shall be contextually interpreted based on the security type of the BSSID where connection
+         * will occur.
+         *
+         * When the length of Credentials and available set of BSSID admits more than one option, such as the presence
+         * of both WPA2 and WPA security type within the result set, WPA2 shall be considered more secure.
+         *
+         * Note that it may occur that a station cannot connect to a particular access point with higher security and
+         * selects a lower security connectivity type if the link quality is deemed to be too low to achieve successful
+         * operation, or if all retry attempts fail.
+         *
+         * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.3.1
+         */
+        credentials: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+    }>;
+    /**
+     * Input to the NetworkCommissioning addOrUpdateThreadNetwork command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.4
+     */
+    const TlvAddOrUpdateThreadNetworkRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * The OperationalDataset field shall contain the Thread Network Parameters, including channel, PAN ID, and
+         * Extended PAN ID.
+         *
+         * The encoding for the OperationalDataset field is defined in the Thread specification. The client shall pass
+         * the OperationalDataset as an opaque octet string.
+         *
+         * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.4.1
+         */
+        operationalDataset: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+    }>;
+    /**
+     * These are optional features supported by NetworkCommissioningCluster.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.4
+     */
+    enum Feature {
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        WiFiNetworkInterface = "WiFiNetworkInterface",
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        ThreadNetworkInterface = "ThreadNetworkInterface",
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        EthernetNetworkInterface = "EthernetNetworkInterface"
+    }
+    /**
+     * These elements and properties are present in all NetworkCommissioning clusters.
+     */
+    const Base: BaseClusterComponent<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }, {
+        /**
+         * This shall indicate the maximum number of network configuration entries that can be added, based on
+         * available device resources. The length of the Networks attribute list shall be less than or equal to
+         * this value.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.1
+         */
+        maxNetworks: FixedAttribute<number, any>;
+        /**
+         * This attribute shall indicate the network configurations that are usable on the network interface
+         * represented by this cluster server instance.
+         *
+         * The order of configurations in the list reflects precedence. That is, any time the Node attempts to
+         * connect to the network it shall attempt to do so using the configurations in Networks Attribute in the
+         * order as they appear in the list.
+         *
+         * The order of list items shall only be modified by the AddOrUpdateThreadNetwork, AddOrUpdateWiFiNetwork
+         * and ReorderNetwork commands. In other words, the list shall be stable over
+         *
+         * time, unless mutated externally.
+         *
+         * Ethernet networks shall be automatically populated by the cluster server. Ethernet Network Commissioning
+         * Cluster instances shall always have exactly one Section 11.8.5.4, “NetworkInfoStruct” instance in their
+         * Networks attribute. There shall be no way to add, update or remove Ethernet network configurations to
+         * those Cluster instances.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.2
+         */
+        networks: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * Every network is uniquely identified (for purposes of commissioning) by a NetworkID mapping to the following
+             * technology-specific properties:
+             *
+             *   • SSID for Wi-Fi
+             *
+             *   • Extended PAN ID for Thread
+             *
+             *   • Network interface instance name at operating system (or equivalent unique name) for Ethernet.
+             *
+             * The semantics of the NetworkID field therefore varies between network types accordingly. It contains SSID
+             * for Wi-Fi networks, Extended PAN ID (XPAN ID) for Thread networks and netif name for Ethernet networks.
+             *
+             * NOTE
+             *
+             * SSID in Wi-Fi is a collection of 1-32 bytes, the text encoding of which is not specified. Implementations
+             * must be careful to support reporting byte strings without requiring a particular encoding for transfer. Only
+             * the commissioner should try to potentially decode the bytes. The most common encoding is UTF-8, however this
+             * is just a convention. Some configurations may use Latin-1 or other character sets. A commissioner may decode
+             * using UTF-8, replacing encoding errors with "?" at the application level while retaining the underlying
+             * representation.
+             *
+             * XPAN ID is a big-endian 64-bit unsigned number, represented on the first 8 octets of the octet string.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.1
+             */
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            /**
+             * This field shall indicate the connected status of the associated network, where "connected" means currently
+             * linked to the network technology (e.g. Associated for a Wi-Fi network, media connected for an Ethernet
+             * network).
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.2
+             */
+            connected: import("../../tlv/TlvObject.js").FieldType<boolean>;
+        }>[], any>;
+        /**
+         * This attribute shall indicate whether the associated network interface is enabled or not. By default all
+         * network interfaces SHOULD be enabled during initial commissioning (InterfaceEnabled set to true).
+         *
+         * It is undefined what happens if InterfaceEnabled is written to false on the same interface as that which
+         * is used to write the value. In that case, it is possible that the Administrator would have to await
+         * expiry of the fail-safe, and associated recovery of network configuration to prior safe values, before
+         * being able to communicate with the node again (see Section 11.9.6.2, “ArmFailSafe Command”).
+         *
+         * It may be possible to disable Ethernet interfaces but it is implementation-defined. If not supported, a
+         * write to this attribute with a value of false shall fail with a status of INVALID_ACTION. When disabled,
+         * an Ethernet interface would longer employ media detection. That is, a simple unplug and replug of the
+         * cable shall NOT re-enable the interface.
+         *
+         * On Ethernet-only Nodes, there shall always be at least one of the Network Commissioning server cluster
+         * instances with InterfaceEnabled set to true.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.5
+         */
+        interfaceEnabled: WritableAttribute<boolean, any>;
+        /**
+         * This attribute shall indicate the status of the last attempt either scan or connect to an operational
+         * network, using this interface, whether by invocation of the ConnectNetwork command or by autonomous
+         * connection after loss of connectivity or during initial establishment. If no such attempt was made, or
+         * no network configurations exist in the Networks attribute, then this attribute shall be set to null.
+         *
+         * This attribute is present to assist with error recovery during Network commissioning and to assist in
+         * non-concurrent networking commissioning flows.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.6
+         */
+        lastNetworkingStatus: Attribute<NetworkCommissioningStatus | null, any>;
+        /**
+         * This attribute shall indicate the NetworkID used in the last attempt to connect to an operational
+         * network, using this interface, whether by invocation of the ConnectNetwork command or by autonomous
+         * connection after loss of connectivity or during initial establishment. If no such attempt was made, or
+         * no network configurations exist in the Networks attribute, then this attribute shall be set to null.
+         *
+         * If a network configuration is removed from the Networks attribute using the RemoveNetwork command after
+         * a connection attempt, this field may indicate a NetworkID that is no longer configured on the Node.
+         *
+         * This attribute is present to assist with error recovery during Network commissioning and to assist in
+         * non-concurrent networking commissioning flows.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.7
+         */
+        lastNetworkId: Attribute<Uint8Array | null, any>;
+        /**
+         * This attribute shall indicate the ErrorValue used in the last failed attempt to connect to an
+         * operational network, using this interface, whether by invocation of the ConnectNetwork command or by
+         * autonomous connection after loss of connectivity or during initial establishment. If no such attempt was
+         * made, or no network configurations exist in the Networks attribute, then this attribute shall be set to
+         * null.
+         *
+         * If the last connection succeeded, as indicated by a value of Success in the LastNetworkingStatus
+         * attribute, then this field shall be set to null.
+         *
+         * This attribute is present to assist with error recovery during Network commissioning and to assist in
+         * non-concurrent networking commissioning flows.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.8
+         */
+        lastConnectErrorValue: Attribute<number | null, any>;
+    }, import("../../cluster/Cluster.js").Commands, import("../../cluster/Cluster.js").Events>;
+    /**
+     * A NetworkCommissioningCluster supports these elements if it supports features WiFiNetworkInterface or
+     * ThreadNetworkInterface.
+     */
+    const WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent: ClusterComponent<{
+        /**
+         * This attribute shall indicate the maximum duration taken, in seconds, by the network interface on this
+         * cluster server instance to provide scan results.
+         *
+         * See Section 11.8.7.1, “ScanNetworks Command” for usage.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.3
+         */
+        scanMaxTimeSeconds: FixedAttribute<number, any>;
+        /**
+         * This attribute shall indicate the maximum duration taken, in seconds, by the network interface on this
+         * cluster server instance to report a successful or failed network connection indication. This maximum
+         * time shall account for all operations needed until a successful network connection is deemed to have
+         * occurred, including, for example, obtaining IP addresses, or the execution of necessary internal retries.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.4
+         */
+        connectMaxTimeSeconds: FixedAttribute<number, any>;
+    }, {
+        /**
+         * This command shall scan on the Cluster instance’s associated network interface for either of:
+         *
+         *   • All available networks (non-directed scanning)
+         *
+         *   • Specific networks (directed scanning)
+         *
+         * Scanning for available networks detects all networks of the type corresponding to the cluster server
+         * instance’s associated network interface that are possible to join, such as all visible Wi-Fi access
+         * points for Wi-Fi cluster server instances, all Thread PANs for Thread cluster server instances, within
+         * bounds of the maximum response size.
+         *
+         * Scanning for a specific network (i.e. directed scanning) takes place if a network identifier (e.g. Wi-Fi
+         * SSID) is provided in the command arguments. Directed scanning shall restrict the result set to the
+         * specified network only.
+         *
+         * The client shall NOT expect the server to be done scanning and have responded with ScanNetworksResponse
+         * before ScanMaxTimeSeconds seconds have elapsed. Enough transport time affordances for retries SHOULD be
+         * expected before a client determines the operation to have timed-out.
+         *
+         * This command shall fail with a status code of BUSY if the server determines that it will fail to
+         * reliably send a response due to changes of networking interface configuration at runtime for the
+         * interface over which the command was invoked, or if it is currently unable to proceed with such an
+         * operation.
+         *
+         * Clients shall be resilient to a server that either does not support or cannot proceed with the
+         * ScanNetworks command.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1
+         */
+        scanNetworks: Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * This field, if present, shall contain the SSID for a directed scan of that particular Wi-Fi SSID. Otherwise,
+             * if the field is absent, or it is null, this shall indicate scanning of all BSSID in range. This field shall
+             * be ignored for ScanNetworks invocations on non-Wi-Fi server instances.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1.1
+             */
+            ssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array | null>;
+            /**
+             * The Breadcrumb field, if present, shall be used to atomically set the Breadcrumb attribute in the General
+             * Commissioning cluster on success of the associated command. If the command fails, the Breadcrumb attribute
+             * in the General Commissioning cluster shall be left unchanged.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1.2
+             */
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * The NetworkingStatus field shall indicate the status of the last scan operation, taking one of these values:
+             *
+             *   • Success: Scanning succeeded.
+             *
+             *   • NetworkNotFound: No instance of an explicitly-provided network identifier was found during the scan.
+             *     This error cannot occur if no network identifier was provided, such as when scanning for all available
+             *     networks.
+             *
+             *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+             *
+             *   • RegulatoryError: Could not scan on any bands due to lack of regulatory configuration.
+             *
+             *   • UnknownError: An internal error occurred during scanning.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.1
+             */
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            /**
+             * This field, if present and non-empty, may contain error information which may be communicated to the user in
+             * case the NetworkingStatus was not Success. Its purpose is to help developers in troubleshooting errors and
+             * may go into logs or crash reports.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.2
+             */
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * If NetworkingStatus was Success, this field shall contain the Wi-Fi network scan results. The list may be
+             * empty if none were found in range on the bands supported by the interface, or if directed scanning had been
+             * used and the desired SSID was not found in range.
+             *
+             * The maximum number of results present in the result list supported may depend on memory and may contain a
+             * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+             * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+             *
+             * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+             * RSSI order, even if RSSI is not reported in the response, to maximize the likelihood that most likely to be
+             * reachable elements are included within the size limits of the response.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.3
+             */
+            wiFiScanResults: import("../../tlv/TlvObject.js").OptionalFieldType<import("../../tlv/TlvObject.js").TypeFromFields<{
+                security: import("../../tlv/TlvObject.js").OptionalFieldType<TypeFromPartialBitSchema<{
+                    /**
+                     * Supports unencrypted Wi-Fi
+                     */
+                    unencrypted: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WEP security
+                     */
+                    wep: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WPA-Personal security
+                     */
+                    wpaPersonal: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WPA2-Personal security
+                     */
+                    wpa2Personal: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WPA3-Personal security
+                     */
+                    wpa3Personal: BitFlag;
+                }>>;
+                ssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+                bssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+                channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                /**
+                 * This field, if present, may be used to differentiate overlapping channel number values across different
+                 * Wi-Fi frequency bands.
+                 *
+                 * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.1
+                 */
+                wiFiBand: import("../../tlv/TlvObject.js").OptionalFieldType<WiFiBand>;
+                /**
+                 * This field, if present, shall denote the signal strength in dBm of the associated scan result.
+                 *
+                 * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.2
+                 */
+                rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>[]>;
+            /**
+             * If NetworkingStatus was Success, this field shall contain the Thread network scan results. The list may be
+             * empty if none were found in range on the bands supported by the interface.
+             *
+             * The maximum number of results present in the result list supported may depend on memory and may contain a
+             * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+             * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+             *
+             * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+             * LQI order, to maximize the likelihood that most likely to be reachable elements are included within the size
+             * limits of the response.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.4
+             */
+            threadScanResults: import("../../tlv/TlvObject.js").OptionalFieldType<import("../../tlv/TlvObject.js").TypeFromFields<{
+                panId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                extendedPanId: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+                networkName: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+                channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                version: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                /**
+                 * ExtendedAddress stands for an IEEE 802.15.4 Extended Address.
+                 *
+                 * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.6.1
+                 */
+                extendedAddress: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+                rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                lqi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>[]>;
+        }>, any>;
+        /**
+         * This command shall remove the network configuration from the Cluster if there was already a network
+         * configuration with the same NetworkID. The relative order of the entries in the Networks attribute list
+         * shall remain unchanged, except for the removal of the requested network configuration.
+         *
+         * If this command is received without an armed fail-safe context (see Section 11.9.6.2, “ArmFailSafe
+         * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+         *
+         * If the Networks attribute does not contain a matching entry, the command shall immediately respond with
+         * NetworkConfigResponse having NetworkingStatus status field set to NetworkIdNotFound.
+         *
+         * On success, the NetworkConfigResponse command shall have its NetworkIndex field set to the 0- based
+         * index of the entry in the Networks attribute that was just removed, and a NetworkingStatus status field
+         * set to Success.
+         *
+         * This field shall contain the NetworkID for the entry to remove: the SSID for Wi-Fi and XPAN ID
+         *
+         * for Thread.
+         *
+         * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.7
+         */
+        removeNetwork: Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>;
+        /**
+         * This command shall attempt to connect to a network whose configuration was previously added by either
+         * the AddOrUpdateWiFiNetwork or AddOrUpdateThreadNetwork commands. Network is identified by its NetworkID.
+         *
+         * This command shall fail with a BUSY status code returned to the initiator if the server is currently
+         * unable to proceed with such an operation, such as if it is currently attempting to connect in the
+         * background, or is already proceeding with a prior ConnectNetwork.
+         *
+         * If this command is received without an armed fail-safe context (see Section 11.9.6.2, “ArmFailSafe
+         * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+         *
+         * Success or failure of this command shall be communicated by the ConnectNetworkResponse command, unless
+         * some data model validations caused a FAILURE status to be sent prior to finishing execution of the
+         * command. The ConnectNetworkResponse shall indicate the value Success in the NetworkingStatus field on
+         * successful connection. On failure to connect, the ConnectNetworkResponse shall contain an appropriate
+         * NetworkingStatus, DebugText and ErrorValue indicating the reason for failure.
+         *
+         * The amount of time needed to determine successful or failing connectivity on the cluster server’s
+         * associated interface is provided by the ConnectMaxTimeSeconds attribute. Clients shall NOT consider the
+         * connection to have timed-out until at least that duration has taken place. For non-concurrent
+         * commissioning situations, the client SHOULD allow additional margin of time to account for its delay in
+         * executing operational discovery of the Node once it is connected to the new network.
+         *
+         * On successful connection, the entry associated with the given Network configuration in the Networks
+         * attribute shall indicate its Connected field set to true, and all other entries, if any exist, shall
+         * indicate their Connected field set to false.
+         *
+         * On failure to connect, the entry associated with the given Network configuration in the Networks
+         * attribute shall indicate its Connected field set to false.
+         *
+         * The precedence order of any entry subject to ConnectNetwork shall NOT change within the Networks
+         * attribute.
+         *
+         * Even after successfully connecting to a network, the configuration shall revert to the prior state
+         *
+         * of configuration if the CommissioningComplete command (see Section 11.9.6.6, “CommissioningComplete
+         * Command”) is not successfully invoked before expiry of the Fail-Safe timer.
+         *
+         * When non-concurrent commissioning is being used by a Commissioner or Administrator, it is possible that
+         * the only method to determine success of the operation is operational discovery of the Node on the new
+         * operational network. Therefore, before invoking the ConnectNetwork command, the client SHOULD re-invoke
+         * the Arm Fail-Safe command with a duration that meets the following:
+         *
+         *   1. Sufficient time to meet the minimum required time (see Section 11.8.6.4, “ConnectMaxTimeSeconds
+         *      Attribute”) that may be taken by the server to connect to the desired network.
+         *
+         *   2. Sufficient time to account for possible message-layer retries when a response is requested.
+         *
+         *   3. Sufficient time to allow operational discovery on the new network by a Commissioner or
+         *      Administrator.
+         *
+         *   4. Sufficient time to establish a CASE session after operational discovery
+         *
+         *   5. Not so long that, in error situations, the delay to reverting back to being discoverable for
+         *      commissioning with a previous configuration would cause significant user-perceived delay.
+         *
+         * Note as well that the CommissioningTimeout duration provided in a prior OpenCommissioningWindow or
+         * OpenBasicCommissioningWindow command may impact the total time available to proceed with error recovery
+         * after a connection failure.
+         *
+         * The LastNetworkingStatus, LastNetworkID and LastConnectErrorValue attributes may assist the client in
+         * determining the reason for a failure after reconnecting over a Commissioning channel, especially in
+         * non-concurrent commissioning situations.
+         *
+         * This field shall contain the NetworkID for the entry used to configure the connection: the SSID for
+         * Wi-Fi and XPAN ID for Thread.
+         *
+         * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.9
+         */
+        connectNetwork: Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             *   • ErrorValue interpretation for Wi-Fi association errors:
+             *
+             *     ◦ On any association failure during enabling of a network, the ErrorValue field shall be set to the
+             *       Status Code value that was present in the last frame related to association where Status Code was not
+             *       equal to zero and which caused the failure of a final retry attempt, if this final failure was due to
+             *       one of the following Management frames:
+             *
+             *       ▪ Association Response (Type 0, Subtype 1)
+             *
+             *       ▪ Reassociation Response (Type 0, Subtype 3)
+             *
+             *       ▪ Authentication (Type 0, Subtype 11)
+             *
+             *     ◦ Table 9-50 "Status Codes" in IEEE 802.11-2020 contains a description of all values possible, which can
+             *       unambiguously be used to determine the cause, such as an invalid security type, unsupported rate, etc.
+             *
+             *   • Otherwise, the ErrorValue field shall contain an implementation-dependent value which may be used by a
+             *     reader of the structure to record, report or diagnose the failure.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.10.1
+             */
+            errorValue: import("../../tlv/TlvObject.js").FieldType<number | null>;
+        }>, any>;
+        /**
+         * This command shall set the specific order of the network configuration selected by its NetworkID in the
+         * Networks attribute list to match the position given by NetworkIndex.
+         *
+         * This field shall contain the NetworkID for the entry to reorder: the SSID for Wi-Fi and XPAN ID for
+         * Thread.
+         *
+         * This field shall contain the 0-based index of the new desired position of the entry in the Networks
+         * attribute.
+         *
+         * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+         *
+         * Effect when received
+         *
+         * If the Networks attribute does not contain a matching entry, the command shall immediately respond with
+         * NetworkConfigResponse having NetworkingStatus status field set to NetworkIdNotFound.
+         *
+         * If the NetworkIndex field has a value larger or equal to the current number of entries in the Networks
+         * attribute, the command shall immediately respond with NetworkConfigResponse having NetworkingStatus
+         * status field set to OutOfRange.
+         *
+         * On success, the NetworkConfigResponse command shall have its NetworkIndex field set to the 0- based
+         * index of the entry in the Networks attribute that was just updated, matching the incoming NetworkIndex,
+         * and a NetworkingStatus status field set to Success.
+         *
+         * The entry selected shall be inserted at the new position in the list. All other entries, if any exist,
+         * shall be moved to allow the insertion, in a way that they all retain their existing relative order
+         * between each other, with the exception of the newly re-ordered entry.
+         *
+         * Re-ordering to the same NetworkIndex as the current location shall be considered as a success and yield
+         * no visible changes of the Networks attribute.
+         *
+         * Examples of re-ordering
+         *
+         * To better illustrate the re-ordering operation, consider this initial state, exemplary of a Wi-Fi
+         *
+         * device:
+         *
+         * On receiving ReorderNetwork with:
+         *
+         *   • NetworkId = Home-Guest
+         *
+         *   • NetworkIndex = 0
+         *
+         * The outcome, after applying to the initial state would be:
+         *
+         * In the above outcome, FancyCat and BlueDolphin moved "down" and Home-Guest became the highest priority
+         * network in the list.
+         *
+         * On receiving ReorderNetwork with:
+         *
+         *   • NetworkId = FancyCat
+         *
+         *   • NetworkIndex = 3
+         *
+         * The outcome, after applying to the initial state would be:
+         *
+         * In the above outcome, BlueDolphin, Home-Guest and WillowTree moved "up" and FancyCat became the lowest
+         * priority network in the list.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.11
+         */
+        reorderNetwork: Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            networkIndex: import("../../tlv/TlvObject.js").FieldType<number>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>;
+    }, import("../../cluster/Cluster.js").Events>;
+    /**
+     * A NetworkCommissioningCluster supports these elements if it supports feature WiFiNetworkInterface.
+     */
+    const WiFiNetworkInterfaceComponent: ClusterComponent<import("../../cluster/Cluster.js").Attributes, {
+        /**
+         * This command shall be used to add or modify Wi-Fi network configurations.
+         *
+         * If this command is received without an armed fail-safe context (see Section 11.9.6.2, “ArmFailSafe
+         * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+         *
+         * The Credentials associated with the network are not readable after execution of this command, as they do
+         * not appear in the Networks attribute list, for security reasons.
+         *
+         * See Section 11.8.7.5, “Common processing of AddOrUpdateWiFiNetwork and AddOrUpdateThreadNetwork” for
+         * behavior of addition/update.
+         *
+         * This field shall contain the SSID to which to attempt connection. Specific BSSID selection is not
+         * supported by this cluster.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.3
+         */
+        addOrUpdateWiFiNetwork: Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            ssid: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            /**
+             * Credentials is the passphrase or PSK for the network (if any is needed).
+             *
+             * Security type, cipher and credential format (passphrase or PSK) shall be contextually auto- selected during
+             * execution of the ConnectNetwork Command and during subsequent operational state network connections, based
+             * on the most secure Wi-Fi security type available within beacons and probe responses for the set of all
+             * discovered BSSIDs for the configured SSID. The type of PSK or passphrase used shall be inferred based on the
+             * length and contents of the Credentials field provided, matching the security type chosen.
+             *
+             * Valid Credentials length are:
+             *
+             *   • 0 bytes: Unsecured (open) connection
+             *
+             *   • 5 bytes: WEP-64 passphrase
+             *
+             *   • 10 hexadecimal ASCII characters: WEP-64 40-bit hex raw PSK
+             *
+             *   • 13 bytes: WEP-128 passphrase
+             *
+             *   • 26 hexadecimal ASCII characters: WEP-128 104-bit hex raw PSK
+             *
+             *   • 8..63 bytes: WPA/WPA2/WPA3 passphrase
+             *
+             *   • 64 bytes: WPA/WPA2/WPA3 raw hex PSK
+             *
+             * These lengths shall be contextually interpreted based on the security type of the BSSID where connection
+             * will occur.
+             *
+             * When the length of Credentials and available set of BSSID admits more than one option, such as the presence
+             * of both WPA2 and WPA security type within the result set, WPA2 shall be considered more secure.
+             *
+             * Note that it may occur that a station cannot connect to a particular access point with higher security and
+             * selects a lower security connectivity type if the link quality is deemed to be too low to achieve successful
+             * operation, or if all retry attempts fail.
+             *
+             * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.3.1
+             */
+            credentials: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>;
+    }, import("../../cluster/Cluster.js").Events>;
+    /**
+     * A NetworkCommissioningCluster supports these elements if it supports feature ThreadNetworkInterface.
+     */
+    const ThreadNetworkInterfaceComponent: ClusterComponent<import("../../cluster/Cluster.js").Attributes, {
+        /**
+         * This command shall be used to add or modify Thread network configurations.
+         *
+         * If this command is received without an armed fail-safe context (see Section 11.9.6.2, “ArmFailSafe
+         * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+         *
+         * See Section 11.8.7.5, “Common processing of AddOrUpdateWiFiNetwork and AddOrUpdateThreadNetwork” for
+         * behavior of addition/update.
+         *
+         * The XPAN ID in the OperationalDataset serves as the NetworkID for the network configuration to be added
+         * or updated.
+         *
+         * If the Networks attribute list does not contain an entry with the same NetworkID as the one provided in
+         * the OperationalDataset, the operation shall be considered an addition, otherwise, it shall be considered
+         * an update.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.4
+         */
+        addOrUpdateThreadNetwork: Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * The OperationalDataset field shall contain the Thread Network Parameters, including channel, PAN ID, and
+             * Extended PAN ID.
+             *
+             * The encoding for the OperationalDataset field is defined in the Thread specification. The client shall pass
+             * the OperationalDataset as an opaque octet string.
+             *
+             * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.4.1
+             */
+            operationalDataset: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>;
+    }, import("../../cluster/Cluster.js").Events>;
+    /**
+     * Network Commissioning
+     *
+     * Network commissioning is part of the overall Node commissioning. The main goal of Network Commissioning Cluster
+     * is to associate a Node with or manage a Node’s one or more network interfaces. These network interfaces can
+     * include the following types.
+     *
+     *   • Wi-Fi (IEEE 802.11-2020)
+     *
+     *   • Ethernet (802.3)
+     *
+     *   • Thread (802.15.4)
+     *
+     * An instance of the Network Commissioning Cluster only applies to a single network interface instance present. An
+     * interface, in this context, is a unique entity that can have an IPv6 address assigned to it and ingress and
+     * egress IP packets.
+     *
+     * NetworkCommissioningCluster supports optional features that you can enable with the
+     * NetworkCommissioningCluster.with() factory method.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8
+     */
+    const Cluster: ExtensibleCluster<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }, TypeFromPartialBitSchema<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }>, import("../../util/Type.js").Merge<{
+        /**
+         * This shall indicate the maximum number of network configuration entries that can be added, based on
+         * available device resources. The length of the Networks attribute list shall be less than or equal to
+         * this value.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.1
+         */
+        maxNetworks: FixedAttribute<number, any>;
+        /**
+         * This attribute shall indicate the network configurations that are usable on the network interface
+         * represented by this cluster server instance.
+         *
+         * The order of configurations in the list reflects precedence. That is, any time the Node attempts to
+         * connect to the network it shall attempt to do so using the configurations in Networks Attribute in the
+         * order as they appear in the list.
+         *
+         * The order of list items shall only be modified by the AddOrUpdateThreadNetwork, AddOrUpdateWiFiNetwork
+         * and ReorderNetwork commands. In other words, the list shall be stable over
+         *
+         * time, unless mutated externally.
+         *
+         * Ethernet networks shall be automatically populated by the cluster server. Ethernet Network Commissioning
+         * Cluster instances shall always have exactly one Section 11.8.5.4, “NetworkInfoStruct” instance in their
+         * Networks attribute. There shall be no way to add, update or remove Ethernet network configurations to
+         * those Cluster instances.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.2
+         */
+        networks: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * Every network is uniquely identified (for purposes of commissioning) by a NetworkID mapping to the following
+             * technology-specific properties:
+             *
+             *   • SSID for Wi-Fi
+             *
+             *   • Extended PAN ID for Thread
+             *
+             *   • Network interface instance name at operating system (or equivalent unique name) for Ethernet.
+             *
+             * The semantics of the NetworkID field therefore varies between network types accordingly. It contains SSID
+             * for Wi-Fi networks, Extended PAN ID (XPAN ID) for Thread networks and netif name for Ethernet networks.
+             *
+             * NOTE
+             *
+             * SSID in Wi-Fi is a collection of 1-32 bytes, the text encoding of which is not specified. Implementations
+             * must be careful to support reporting byte strings without requiring a particular encoding for transfer. Only
+             * the commissioner should try to potentially decode the bytes. The most common encoding is UTF-8, however this
+             * is just a convention. Some configurations may use Latin-1 or other character sets. A commissioner may decode
+             * using UTF-8, replacing encoding errors with "?" at the application level while retaining the underlying
+             * representation.
+             *
+             * XPAN ID is a big-endian 64-bit unsigned number, represented on the first 8 octets of the octet string.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.1
+             */
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            /**
+             * This field shall indicate the connected status of the associated network, where "connected" means currently
+             * linked to the network technology (e.g. Associated for a Wi-Fi network, media connected for an Ethernet
+             * network).
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.2
+             */
+            connected: import("../../tlv/TlvObject.js").FieldType<boolean>;
+        }>[], any>;
+        /**
+         * This attribute shall indicate whether the associated network interface is enabled or not. By default all
+         * network interfaces SHOULD be enabled during initial commissioning (InterfaceEnabled set to true).
+         *
+         * It is undefined what happens if InterfaceEnabled is written to false on the same interface as that which
+         * is used to write the value. In that case, it is possible that the Administrator would have to await
+         * expiry of the fail-safe, and associated recovery of network configuration to prior safe values, before
+         * being able to communicate with the node again (see Section 11.9.6.2, “ArmFailSafe Command”).
+         *
+         * It may be possible to disable Ethernet interfaces but it is implementation-defined. If not supported, a
+         * write to this attribute with a value of false shall fail with a status of INVALID_ACTION. When disabled,
+         * an Ethernet interface would longer employ media detection. That is, a simple unplug and replug of the
+         * cable shall NOT re-enable the interface.
+         *
+         * On Ethernet-only Nodes, there shall always be at least one of the Network Commissioning server cluster
+         * instances with InterfaceEnabled set to true.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.5
+         */
+        interfaceEnabled: WritableAttribute<boolean, any>;
+        /**
+         * This attribute shall indicate the status of the last attempt either scan or connect to an operational
+         * network, using this interface, whether by invocation of the ConnectNetwork command or by autonomous
+         * connection after loss of connectivity or during initial establishment. If no such attempt was made, or
+         * no network configurations exist in the Networks attribute, then this attribute shall be set to null.
+         *
+         * This attribute is present to assist with error recovery during Network commissioning and to assist in
+         * non-concurrent networking commissioning flows.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.6
+         */
+        lastNetworkingStatus: Attribute<NetworkCommissioningStatus | null, any>;
+        /**
+         * This attribute shall indicate the NetworkID used in the last attempt to connect to an operational
+         * network, using this interface, whether by invocation of the ConnectNetwork command or by autonomous
+         * connection after loss of connectivity or during initial establishment. If no such attempt was made, or
+         * no network configurations exist in the Networks attribute, then this attribute shall be set to null.
+         *
+         * If a network configuration is removed from the Networks attribute using the RemoveNetwork command after
+         * a connection attempt, this field may indicate a NetworkID that is no longer configured on the Node.
+         *
+         * This attribute is present to assist with error recovery during Network commissioning and to assist in
+         * non-concurrent networking commissioning flows.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.7
+         */
+        lastNetworkId: Attribute<Uint8Array | null, any>;
+        /**
+         * This attribute shall indicate the ErrorValue used in the last failed attempt to connect to an
+         * operational network, using this interface, whether by invocation of the ConnectNetwork command or by
+         * autonomous connection after loss of connectivity or during initial establishment. If no such attempt was
+         * made, or no network configurations exist in the Networks attribute, then this attribute shall be set to
+         * null.
+         *
+         * If the last connection succeeded, as indicated by a value of Success in the LastNetworkingStatus
+         * attribute, then this field shall be set to null.
+         *
+         * This attribute is present to assist with error recovery during Network commissioning and to assist in
+         * non-concurrent networking commissioning flows.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.8
+         */
+        lastConnectErrorValue: Attribute<number | null, any>;
+    }, import("../../cluster/Cluster.js").GlobalAttributes<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }>>, import("../../cluster/Cluster.js").Commands, import("../../cluster/Cluster.js").Events, <T extends ("WiFiNetworkInterface" | "ThreadNetworkInterface" | "EthernetNetworkInterface")[]>(...features_0: T) => Extension<BitFlags<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }, T>>>;
+    type Extension<SF extends TypeFromPartialBitSchema<typeof Base.features>> = ClusterForBaseCluster<typeof Base, SF> & {
+        supportedFeatures: SF;
+    } & (SF extends {
+        wiFiNetworkInterface: true;
+    } | {
+        threadNetworkInterface: true;
+    } ? typeof WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent : {}) & (SF extends {
+        wiFiNetworkInterface: true;
+    } ? typeof WiFiNetworkInterfaceComponent : {}) & (SF extends {
+        threadNetworkInterface: true;
+    } ? typeof ThreadNetworkInterfaceComponent : {}) & (SF extends {
+        wiFiNetworkInterface: true;
+        threadNetworkInterface: true;
+    } ? never : {}) & (SF extends {
+        wiFiNetworkInterface: true;
+        ethernetNetworkInterface: true;
+    } ? never : {}) & (SF extends {
+        threadNetworkInterface: true;
+        ethernetNetworkInterface: true;
+    } ? never : {}) & (SF extends {
+        wiFiNetworkInterface: false;
+        threadNetworkInterface: false;
+        ethernetNetworkInterface: false;
+    } ? never : {});
+    /**
+     * This cluster supports all NetworkCommissioning features. It may support illegal feature combinations.
+     *
+     * If you use this cluster you must manually specify which features are active and ensure the set of active
+     * features is legal per the Matter specification.
+     */
+    const Complete: CreateCluster<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }, TypeFromPartialBitSchema<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }>, import("../../util/Type.js").Merge<{
+        scanMaxTimeSeconds: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, FixedAttribute<number, any>>;
+        connectMaxTimeSeconds: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, FixedAttribute<number, any>>;
+        maxNetworks: FixedAttribute<number, any>;
+        networks: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * Every network is uniquely identified (for purposes of commissioning) by a NetworkID mapping to the following
+             * technology-specific properties:
+             *
+             *   • SSID for Wi-Fi
+             *
+             *   • Extended PAN ID for Thread
+             *
+             *   • Network interface instance name at operating system (or equivalent unique name) for Ethernet.
+             *
+             * The semantics of the NetworkID field therefore varies between network types accordingly. It contains SSID
+             * for Wi-Fi networks, Extended PAN ID (XPAN ID) for Thread networks and netif name for Ethernet networks.
+             *
+             * NOTE
+             *
+             * SSID in Wi-Fi is a collection of 1-32 bytes, the text encoding of which is not specified. Implementations
+             * must be careful to support reporting byte strings without requiring a particular encoding for transfer. Only
+             * the commissioner should try to potentially decode the bytes. The most common encoding is UTF-8, however this
+             * is just a convention. Some configurations may use Latin-1 or other character sets. A commissioner may decode
+             * using UTF-8, replacing encoding errors with "?" at the application level while retaining the underlying
+             * representation.
+             *
+             * XPAN ID is a big-endian 64-bit unsigned number, represented on the first 8 octets of the octet string.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.1
+             */
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            /**
+             * This field shall indicate the connected status of the associated network, where "connected" means currently
+             * linked to the network technology (e.g. Associated for a Wi-Fi network, media connected for an Ethernet
+             * network).
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.2
+             */
+            connected: import("../../tlv/TlvObject.js").FieldType<boolean>;
+        }>[], any>;
+        interfaceEnabled: WritableAttribute<boolean, any>;
+        lastNetworkingStatus: Attribute<NetworkCommissioningStatus | null, any>;
+        lastNetworkId: Attribute<Uint8Array | null, any>;
+        lastConnectErrorValue: Attribute<number | null, any>;
+        clusterRevision: Attribute<number, never>;
+        featureMap: Attribute<TypeFromPartialBitSchema<{
+            /**
+             * WiFiNetworkInterface
+             *
+             * Wi-Fi related features
+             */
+            wiFiNetworkInterface: BitFlag;
+            /**
+             * ThreadNetworkInterface
+             *
+             * Thread related features
+             */
+            threadNetworkInterface: BitFlag;
+            /**
+             * EthernetNetworkInterface
+             *
+             * Ethernet related features
+             */
+            ethernetNetworkInterface: BitFlag;
+        }>, never>;
+        attributeList: Attribute<import("../../datatype/AttributeId.js").AttributeId[], never>;
+        eventList: Attribute<import("../../datatype/EventId.js").EventId[], never>;
+        acceptedCommandList: Attribute<import("../../datatype/CommandId.js").CommandId[], never>;
+        generatedCommandList: Attribute<import("../../datatype/CommandId.js").CommandId[], never>;
+    }, import("../../cluster/Cluster.js").GlobalAttributes<{
+        /**
+         * WiFiNetworkInterface
+         *
+         * Wi-Fi related features
+         */
+        wiFiNetworkInterface: BitFlag;
+        /**
+         * ThreadNetworkInterface
+         *
+         * Thread related features
+         */
+        threadNetworkInterface: BitFlag;
+        /**
+         * EthernetNetworkInterface
+         *
+         * Ethernet related features
+         */
+        ethernetNetworkInterface: BitFlag;
+    }>>, {
+        scanNetworks: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * This field, if present, shall contain the SSID for a directed scan of that particular Wi-Fi SSID. Otherwise,
+             * if the field is absent, or it is null, this shall indicate scanning of all BSSID in range. This field shall
+             * be ignored for ScanNetworks invocations on non-Wi-Fi server instances.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1.1
+             */
+            ssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array | null>;
+            /**
+             * The Breadcrumb field, if present, shall be used to atomically set the Breadcrumb attribute in the General
+             * Commissioning cluster on success of the associated command. If the command fails, the Breadcrumb attribute
+             * in the General Commissioning cluster shall be left unchanged.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.1.2
+             */
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * The NetworkingStatus field shall indicate the status of the last scan operation, taking one of these values:
+             *
+             *   • Success: Scanning succeeded.
+             *
+             *   • NetworkNotFound: No instance of an explicitly-provided network identifier was found during the scan.
+             *     This error cannot occur if no network identifier was provided, such as when scanning for all available
+             *     networks.
+             *
+             *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+             *
+             *   • RegulatoryError: Could not scan on any bands due to lack of regulatory configuration.
+             *
+             *   • UnknownError: An internal error occurred during scanning.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.1
+             */
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            /**
+             * This field, if present and non-empty, may contain error information which may be communicated to the user in
+             * case the NetworkingStatus was not Success. Its purpose is to help developers in troubleshooting errors and
+             * may go into logs or crash reports.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.2
+             */
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * If NetworkingStatus was Success, this field shall contain the Wi-Fi network scan results. The list may be
+             * empty if none were found in range on the bands supported by the interface, or if directed scanning had been
+             * used and the desired SSID was not found in range.
+             *
+             * The maximum number of results present in the result list supported may depend on memory and may contain a
+             * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+             * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+             *
+             * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+             * RSSI order, even if RSSI is not reported in the response, to maximize the likelihood that most likely to be
+             * reachable elements are included within the size limits of the response.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.3
+             */
+            wiFiScanResults: import("../../tlv/TlvObject.js").OptionalFieldType<import("../../tlv/TlvObject.js").TypeFromFields<{
+                security: import("../../tlv/TlvObject.js").OptionalFieldType<TypeFromPartialBitSchema<{
+                    /**
+                     * Supports unencrypted Wi-Fi
+                     */
+                    unencrypted: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WEP security
+                     */
+                    wep: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WPA-Personal security
+                     */
+                    wpaPersonal: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WPA2-Personal security
+                     */
+                    wpa2Personal: BitFlag;
+                    /**
+                     * Supports Wi-Fi using WPA3-Personal security
+                     */
+                    wpa3Personal: BitFlag;
+                }>>;
+                ssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+                bssid: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+                channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                /**
+                 * This field, if present, may be used to differentiate overlapping channel number values across different
+                 * Wi-Fi frequency bands.
+                 *
+                 * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.1
+                 */
+                wiFiBand: import("../../tlv/TlvObject.js").OptionalFieldType<WiFiBand>;
+                /**
+                 * This field, if present, shall denote the signal strength in dBm of the associated scan result.
+                 *
+                 * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.5.2
+                 */
+                rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>[]>;
+            /**
+             * If NetworkingStatus was Success, this field shall contain the Thread network scan results. The list may be
+             * empty if none were found in range on the bands supported by the interface.
+             *
+             * The maximum number of results present in the result list supported may depend on memory and may contain a
+             * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+             * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+             *
+             * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+             * LQI order, to maximize the likelihood that most likely to be reachable elements are included within the size
+             * limits of the response.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.2.4
+             */
+            threadScanResults: import("../../tlv/TlvObject.js").OptionalFieldType<import("../../tlv/TlvObject.js").TypeFromFields<{
+                panId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                extendedPanId: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+                networkName: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+                channel: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                version: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                /**
+                 * ExtendedAddress stands for an IEEE 802.15.4 Extended Address.
+                 *
+                 * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.6.1
+                 */
+                extendedAddress: import("../../tlv/TlvObject.js").OptionalFieldType<Uint8Array>;
+                rssi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+                lqi: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>[]>;
+        }>, any>>;
+        addOrUpdateWiFiNetwork: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            ssid: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            /**
+             * Credentials is the passphrase or PSK for the network (if any is needed).
+             *
+             * Security type, cipher and credential format (passphrase or PSK) shall be contextually auto- selected during
+             * execution of the ConnectNetwork Command and during subsequent operational state network connections, based
+             * on the most secure Wi-Fi security type available within beacons and probe responses for the set of all
+             * discovered BSSIDs for the configured SSID. The type of PSK or passphrase used shall be inferred based on the
+             * length and contents of the Credentials field provided, matching the security type chosen.
+             *
+             * Valid Credentials length are:
+             *
+             *   • 0 bytes: Unsecured (open) connection
+             *
+             *   • 5 bytes: WEP-64 passphrase
+             *
+             *   • 10 hexadecimal ASCII characters: WEP-64 40-bit hex raw PSK
+             *
+             *   • 13 bytes: WEP-128 passphrase
+             *
+             *   • 26 hexadecimal ASCII characters: WEP-128 104-bit hex raw PSK
+             *
+             *   • 8..63 bytes: WPA/WPA2/WPA3 passphrase
+             *
+             *   • 64 bytes: WPA/WPA2/WPA3 raw hex PSK
+             *
+             * These lengths shall be contextually interpreted based on the security type of the BSSID where connection
+             * will occur.
+             *
+             * When the length of Credentials and available set of BSSID admits more than one option, such as the presence
+             * of both WPA2 and WPA security type within the result set, WPA2 shall be considered more secure.
+             *
+             * Note that it may occur that a station cannot connect to a particular access point with higher security and
+             * selects a lower security connectivity type if the link quality is deemed to be too low to achieve successful
+             * operation, or if all retry attempts fail.
+             *
+             * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.3.1
+             */
+            credentials: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>>;
+        addOrUpdateThreadNetwork: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * The OperationalDataset field shall contain the Thread Network Parameters, including channel, PAN ID, and
+             * Extended PAN ID.
+             *
+             * The encoding for the OperationalDataset field is defined in the Thread specification. The client shall pass
+             * the OperationalDataset as an opaque octet string.
+             *
+             * See Section 11.8.7.1.2, “Breadcrumb Field” for usage.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.4.1
+             */
+            operationalDataset: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>>;
+        removeNetwork: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>>;
+        connectNetwork: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             *   • ErrorValue interpretation for Wi-Fi association errors:
+             *
+             *     ◦ On any association failure during enabling of a network, the ErrorValue field shall be set to the
+             *       Status Code value that was present in the last frame related to association where Status Code was not
+             *       equal to zero and which caused the failure of a final retry attempt, if this final failure was due to
+             *       one of the following Management frames:
+             *
+             *       ▪ Association Response (Type 0, Subtype 1)
+             *
+             *       ▪ Reassociation Response (Type 0, Subtype 3)
+             *
+             *       ▪ Authentication (Type 0, Subtype 11)
+             *
+             *     ◦ Table 9-50 "Status Codes" in IEEE 802.11-2020 contains a description of all values possible, which can
+             *       unambiguously be used to determine the cause, such as an invalid security type, unsupported rate, etc.
+             *
+             *   • Otherwise, the ErrorValue field shall contain an implementation-dependent value which may be used by a
+             *     reader of the structure to record, report or diagnose the failure.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.10.1
+             */
+            errorValue: import("../../tlv/TlvObject.js").FieldType<number | null>;
+        }>, any>>;
+        reorderNetwork: AsConditional<import("../../schema/BitmapSchema.js").BitSchema, Command<import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+            networkIndex: import("../../tlv/TlvObject.js").FieldType<number>;
+            breadcrumb: import("../../tlv/TlvObject.js").OptionalFieldType<number | bigint>;
+        }>, import("../../tlv/TlvObject.js").TypeFromFields<{
+            networkingStatus: import("../../tlv/TlvObject.js").FieldType<NetworkCommissioningStatus>;
+            debugText: import("../../tlv/TlvObject.js").OptionalFieldType<string>;
+            /**
+             * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+             * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+             * request command.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 11.8.7.8.1
+             */
+            networkIndex: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, any>>;
+    }, {}>;
+}
+export type NetworkCommissioningCluster = typeof NetworkCommissioning.Cluster;
+export declare const NetworkCommissioningCluster: ExtensibleCluster<{
+    /**
+     * WiFiNetworkInterface
+     *
+     * Wi-Fi related features
+     */
+    wiFiNetworkInterface: BitFlag;
+    /**
+     * ThreadNetworkInterface
+     *
+     * Thread related features
+     */
+    threadNetworkInterface: BitFlag;
+    /**
+     * EthernetNetworkInterface
+     *
+     * Ethernet related features
+     */
+    ethernetNetworkInterface: BitFlag;
+}, TypeFromPartialBitSchema<{
+    /**
+     * WiFiNetworkInterface
+     *
+     * Wi-Fi related features
+     */
+    wiFiNetworkInterface: BitFlag;
+    /**
+     * ThreadNetworkInterface
+     *
+     * Thread related features
+     */
+    threadNetworkInterface: BitFlag;
+    /**
+     * EthernetNetworkInterface
+     *
+     * Ethernet related features
+     */
+    ethernetNetworkInterface: BitFlag;
+}>, import("../../util/Type.js").Merge<{
+    /**
+     * This shall indicate the maximum number of network configuration entries that can be added, based on
+     * available device resources. The length of the Networks attribute list shall be less than or equal to
+     * this value.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.1
+     */
+    maxNetworks: FixedAttribute<number, any>;
+    /**
+     * This attribute shall indicate the network configurations that are usable on the network interface
+     * represented by this cluster server instance.
+     *
+     * The order of configurations in the list reflects precedence. That is, any time the Node attempts to
+     * connect to the network it shall attempt to do so using the configurations in Networks Attribute in the
+     * order as they appear in the list.
+     *
+     * The order of list items shall only be modified by the AddOrUpdateThreadNetwork, AddOrUpdateWiFiNetwork
+     * and ReorderNetwork commands. In other words, the list shall be stable over
+     *
+     * time, unless mutated externally.
+     *
+     * Ethernet networks shall be automatically populated by the cluster server. Ethernet Network Commissioning
+     * Cluster instances shall always have exactly one Section 11.8.5.4, “NetworkInfoStruct” instance in their
+     * Networks attribute. There shall be no way to add, update or remove Ethernet network configurations to
+     * those Cluster instances.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.2
+     */
+    networks: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+        /**
+         * Every network is uniquely identified (for purposes of commissioning) by a NetworkID mapping to the following
+         * technology-specific properties:
+         *
+         *   • SSID for Wi-Fi
+         *
+         *   • Extended PAN ID for Thread
+         *
+         *   • Network interface instance name at operating system (or equivalent unique name) for Ethernet.
+         *
+         * The semantics of the NetworkID field therefore varies between network types accordingly. It contains SSID
+         * for Wi-Fi networks, Extended PAN ID (XPAN ID) for Thread networks and netif name for Ethernet networks.
+         *
+         * NOTE
+         *
+         * SSID in Wi-Fi is a collection of 1-32 bytes, the text encoding of which is not specified. Implementations
+         * must be careful to support reporting byte strings without requiring a particular encoding for transfer. Only
+         * the commissioner should try to potentially decode the bytes. The most common encoding is UTF-8, however this
+         * is just a convention. Some configurations may use Latin-1 or other character sets. A commissioner may decode
+         * using UTF-8, replacing encoding errors with "?" at the application level while retaining the underlying
+         * representation.
+         *
+         * XPAN ID is a big-endian 64-bit unsigned number, represented on the first 8 octets of the octet string.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.1
+         */
+        networkId: import("../../tlv/TlvObject.js").FieldType<Uint8Array>;
+        /**
+         * This field shall indicate the connected status of the associated network, where "connected" means currently
+         * linked to the network technology (e.g. Associated for a Wi-Fi network, media connected for an Ethernet
+         * network).
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 11.8.5.4.2
+         */
+        connected: import("../../tlv/TlvObject.js").FieldType<boolean>;
+    }>[], any>;
+    /**
+     * This attribute shall indicate whether the associated network interface is enabled or not. By default all
+     * network interfaces SHOULD be enabled during initial commissioning (InterfaceEnabled set to true).
+     *
+     * It is undefined what happens if InterfaceEnabled is written to false on the same interface as that which
+     * is used to write the value. In that case, it is possible that the Administrator would have to await
+     * expiry of the fail-safe, and associated recovery of network configuration to prior safe values, before
+     * being able to communicate with the node again (see Section 11.9.6.2, “ArmFailSafe Command”).
+     *
+     * It may be possible to disable Ethernet interfaces but it is implementation-defined. If not supported, a
+     * write to this attribute with a value of false shall fail with a status of INVALID_ACTION. When disabled,
+     * an Ethernet interface would longer employ media detection. That is, a simple unplug and replug of the
+     * cable shall NOT re-enable the interface.
+     *
+     * On Ethernet-only Nodes, there shall always be at least one of the Network Commissioning server cluster
+     * instances with InterfaceEnabled set to true.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.5
+     */
+    interfaceEnabled: WritableAttribute<boolean, any>;
+    /**
+     * This attribute shall indicate the status of the last attempt either scan or connect to an operational
+     * network, using this interface, whether by invocation of the ConnectNetwork command or by autonomous
+     * connection after loss of connectivity or during initial establishment. If no such attempt was made, or
+     * no network configurations exist in the Networks attribute, then this attribute shall be set to null.
+     *
+     * This attribute is present to assist with error recovery during Network commissioning and to assist in
+     * non-concurrent networking commissioning flows.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.6
+     */
+    lastNetworkingStatus: Attribute<NetworkCommissioning.NetworkCommissioningStatus | null, any>;
+    /**
+     * This attribute shall indicate the NetworkID used in the last attempt to connect to an operational
+     * network, using this interface, whether by invocation of the ConnectNetwork command or by autonomous
+     * connection after loss of connectivity or during initial establishment. If no such attempt was made, or
+     * no network configurations exist in the Networks attribute, then this attribute shall be set to null.
+     *
+     * If a network configuration is removed from the Networks attribute using the RemoveNetwork command after
+     * a connection attempt, this field may indicate a NetworkID that is no longer configured on the Node.
+     *
+     * This attribute is present to assist with error recovery during Network commissioning and to assist in
+     * non-concurrent networking commissioning flows.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.7
+     */
+    lastNetworkId: Attribute<Uint8Array | null, any>;
+    /**
+     * This attribute shall indicate the ErrorValue used in the last failed attempt to connect to an
+     * operational network, using this interface, whether by invocation of the ConnectNetwork command or by
+     * autonomous connection after loss of connectivity or during initial establishment. If no such attempt was
+     * made, or no network configurations exist in the Networks attribute, then this attribute shall be set to
+     * null.
+     *
+     * If the last connection succeeded, as indicated by a value of Success in the LastNetworkingStatus
+     * attribute, then this field shall be set to null.
+     *
+     * This attribute is present to assist with error recovery during Network commissioning and to assist in
+     * non-concurrent networking commissioning flows.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 11.8.6.8
+     */
+    lastConnectErrorValue: Attribute<number | null, any>;
+}, import("../../cluster/Cluster.js").GlobalAttributes<{
+    /**
+     * WiFiNetworkInterface
+     *
+     * Wi-Fi related features
+     */
+    wiFiNetworkInterface: BitFlag;
+    /**
+     * ThreadNetworkInterface
+     *
+     * Thread related features
+     */
+    threadNetworkInterface: BitFlag;
+    /**
+     * EthernetNetworkInterface
+     *
+     * Ethernet related features
+     */
+    ethernetNetworkInterface: BitFlag;
+}>>, import("../../cluster/Cluster.js").Commands, import("../../cluster/Cluster.js").Events, <T extends ("WiFiNetworkInterface" | "ThreadNetworkInterface" | "EthernetNetworkInterface")[]>(...features_0: T) => NetworkCommissioning.Extension<BitFlags<{
+    /**
+     * WiFiNetworkInterface
+     *
+     * Wi-Fi related features
+     */
+    wiFiNetworkInterface: BitFlag;
+    /**
+     * ThreadNetworkInterface
+     *
+     * Thread related features
+     */
+    threadNetworkInterface: BitFlag;
+    /**
+     * EthernetNetworkInterface
+     *
+     * Ethernet related features
+     */
+    ethernetNetworkInterface: BitFlag;
+}, T>>>;
+//# sourceMappingURL=NetworkCommissioningCluster.d.ts.map