@project-chip/matter.js 0.4.0 → 0.5.0

package/dist/cjs/model/standard/elements/PumpConfigurationAndControl.js

@@ -0,0 +1,912 @@
+"use strict";
+/**
+ * @license
+ * Copyright 2022-2023 Project CHIP Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+Object.defineProperty(exports, "__esModule", { value: true });
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+const Matter_js_1 = require("../Matter.js");
+Matter_js_1.Matter.children.push({
+    tag: "cluster",
+    name: "PumpConfigurationAndControl",
+    id: 0x200,
+    classification: "application",
+    description: "Pump Configuration and Control",
+    details: "The Pump Configuration and Control cluster provides an interface for the setup and control of pump " +
+        "devices, and the automatic reporting of pump status information. Note that control of pump speed is " +
+        "not included – speed is controlled by the On/Off and Level Control clusters.",
+    xref: { document: "cluster", section: "4.2" },
+    children: [
+        { tag: "attribute", name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 4 },
+        {
+            tag: "attribute",
+            name: "FeatureMap",
+            id: 0xfffc,
+            type: "FeatureMap",
+            xref: { document: "cluster", section: "4.2.4" },
+            children: [
+                {
+                    tag: "datatype",
+                    name: "PRSCONST",
+                    conformance: "O.a+",
+                    constraint: "0",
+                    description: "ConstantPressure",
+                    details: "Supports operating in constant pressure mode",
+                },
+                {
+                    tag: "datatype",
+                    name: "PRSCOMP",
+                    conformance: "O.a+",
+                    constraint: "1",
+                    description: "CompensatedPressure",
+                    details: "Supports operating in compensated pressure mode",
+                },
+                {
+                    tag: "datatype",
+                    name: "FLW",
+                    conformance: "O.a+",
+                    constraint: "2",
+                    description: "ConstantFlow",
+                    details: "Supports operating in constant flow mode",
+                },
+                {
+                    tag: "datatype",
+                    name: "SPD",
+                    conformance: "O.a+",
+                    constraint: "3",
+                    description: "ConstantSpeed",
+                    details: "Supports operating in constant speed mode",
+                },
+                {
+                    tag: "datatype",
+                    name: "TEMP",
+                    conformance: "O.a+",
+                    constraint: "4",
+                    description: "ConstantTemperature",
+                    details: "Supports operating in constant temperature mode",
+                },
+                {
+                    tag: "datatype",
+                    name: "AUTO",
+                    conformance: "O",
+                    constraint: "5",
+                    description: "Automatic",
+                    details: "Supports operating in automatic mode",
+                },
+                {
+                    tag: "datatype",
+                    name: "LOCAL",
+                    conformance: "O",
+                    constraint: "6",
+                    description: "LocalOperation",
+                    details: "Supports operating using local settings",
+                },
+            ],
+        },
+        {
+            tag: "attribute",
+            name: "MaxPressure",
+            id: 0x0,
+            type: "int16",
+            access: "R V",
+            conformance: "M",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and " +
+                "does not apply to any specific control mode or operation mode." +
+                "\n" +
+                "Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). This attribute shall be null if the " +
+                "value is invalid.",
+            xref: { document: "cluster", section: "4.2.7.1" },
+        },
+        {
+            tag: "attribute",
+            name: "MaxSpeed",
+            id: 0x1,
+            type: "uint16",
+            access: "R V",
+            conformance: "M",
+            constraint: "max 65534",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum speed the pump can achieve. It is a physical limit, and does " +
+                "not apply to any specific control mode or operation mode." +
+                "\n" +
+                "Valid range is 0 to 65,534 RPM (steps of 1 RPM). This attribute shall be null if the value is " +
+                "invalid.",
+            xref: { document: "cluster", section: "4.2.7.2" },
+        },
+        {
+            tag: "attribute",
+            name: "MaxFlow",
+            id: 0x2,
+            type: "uint16",
+            access: "R V",
+            conformance: "M",
+            constraint: "max 65534",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does " +
+                "not apply to any specific control mode or operation mode." +
+                "\n" +
+                "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). This attribute shall be null if the value " +
+                "is invalid.",
+            xref: { document: "cluster", section: "4.2.7.3" },
+        },
+        {
+            tag: "attribute",
+            name: "MinConstPressure",
+            id: 0x3,
+            type: "int16",
+            access: "R V",
+            conformance: "PRSCONST, [AUTO]",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the minimum pressure the pump can achieve when it is working with the " +
+                "ControlMode attribute set to ConstantPressure." +
+                "\n" +
+                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). This attribute shall be null if the " +
+                "value is invalid.",
+            xref: { document: "cluster", section: "4.2.7.4" },
+        },
+        {
+            tag: "attribute",
+            name: "MaxConstPressure",
+            id: 0x4,
+            type: "int16",
+            access: "R V",
+            conformance: "PRSCONST, [AUTO]",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum pressure the pump can achieve when it is working with the " +
+                "ControlMode attribute set to ConstantPressure." +
+                "\n" +
+                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). This attribute shall be null if the " +
+                "value is invalid.",
+            xref: { document: "cluster", section: "4.2.7.5" },
+        },
+        {
+            tag: "attribute",
+            name: "MinCompPressure",
+            id: 0x5,
+            type: "int16",
+            access: "R V",
+            conformance: "PRSCOMP, [AUTO]",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the minimum compensated pressure the pump can achieve when it is working " +
+                "with the ControlMode attribute set to ProportionalPressure." +
+                "\n" +
+                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). This attribute shall be null if the " +
+                "value is invalid.",
+            xref: { document: "cluster", section: "4.2.7.6" },
+        },
+        {
+            tag: "attribute",
+            name: "MaxCompPressure",
+            id: 0x6,
+            type: "int16",
+            access: "R V",
+            conformance: "PRSCOMP, [AUTO]",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum compensated pressure the pump can achieve when it is working " +
+                "with the ControlMode attribute set to ProportionalPressure." +
+                "\n" +
+                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). This attribute shall be null if the " +
+                "value is invalid.",
+            xref: { document: "cluster", section: "4.2.7.7" },
+        },
+        {
+            tag: "attribute",
+            name: "MinConstSpeed",
+            id: 0x7,
+            type: "uint16",
+            access: "R V",
+            conformance: "SPD, [AUTO]",
+            constraint: "max 65534",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the minimum speed the pump can achieve when it is working with the " +
+                "ControlMode attribute set to ConstantSpeed." +
+                "\n" +
+                "Valid range is 0 to 65,534 RPM (steps of 1 RPM). This attribute shall be null if the value is " +
+                "invalid.",
+            xref: { document: "cluster", section: "4.2.7.8" },
+        },
+        {
+            tag: "attribute",
+            name: "MaxConstSpeed",
+            id: 0x8,
+            type: "uint16",
+            access: "R V",
+            conformance: "SPD, [AUTO]",
+            constraint: "max 65534",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum speed the pump can achieve when it is working with the " +
+                "ControlMode attribute set to ConstantSpeed." +
+                "\n" +
+                "Valid range is 0 to 65,534 RPM (steps of 1 RPM). This attribute shall be null if the value is " +
+                "invalid.",
+            xref: { document: "cluster", section: "4.2.7.9" },
+        },
+        {
+            tag: "attribute",
+            name: "MinConstFlow",
+            id: 0x9,
+            type: "uint16",
+            access: "R V",
+            conformance: "FLW, [AUTO]",
+            constraint: "max 65534",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the minimum flow the pump can achieve when it is working with the Con" +
+                "\n" +
+                "trolMode attribute set to ConstantFlow." +
+                "\n" +
+                "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). This attribute shall be null if the value " +
+                "is invalid.",
+            xref: { document: "cluster", section: "4.2.7.10" },
+        },
+        {
+            tag: "attribute",
+            name: "MaxConstFlow",
+            id: 0xa,
+            type: "uint16",
+            access: "R V",
+            conformance: "FLW, [AUTO]",
+            constraint: "max 65534",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum flow the pump can achieve when it is working with the " +
+                "ControlMode attribute set to ConstantFlow." +
+                "\n" +
+                "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). This attribute shall be null if the value " +
+                "is invalid.",
+            xref: { document: "cluster", section: "4.2.7.11" },
+        },
+        {
+            tag: "attribute",
+            name: "MinConstTemp",
+            id: 0xb,
+            type: "int16",
+            access: "R V",
+            conformance: "TEMP, [AUTO]",
+            constraint: "min -27315",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the minimum temperature the pump can maintain in the system when it is " +
+                "working with the ControlMode attribute set to ConstantTemperature." +
+                "\n" +
+                "Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). This attribute shall be null if the " +
+                "value is invalid.",
+            xref: { document: "cluster", section: "4.2.7.12" },
+        },
+        {
+            tag: "attribute",
+            name: "MaxConstTemp",
+            id: 0xc,
+            type: "int16",
+            access: "R V",
+            conformance: "TEMP, [AUTO]",
+            constraint: "min -27315",
+            default: null,
+            quality: "X F",
+            details: "This attribute specifies the maximum temperature the pump can maintain in the system when it is " +
+                "working with the ControlMode attribute set to ConstantTemperature." +
+                "\n" +
+                "MaxConstTemp shall be greater than or equal to MinConstTemp" +
+                "\n" +
+                "Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). This attribute shall be null if the " +
+                "value is invalid.",
+            xref: { document: "cluster", section: "4.2.7.13" },
+        },
+        {
+            tag: "attribute",
+            name: "PumpStatus",
+            id: 0x10,
+            type: "PumpStatusBitmap",
+            access: "R V",
+            conformance: "O",
+            constraint: "desc",
+            default: 0,
+            quality: "P",
+            details: "This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. " +
+                "Where a pump controller function is active, the corresponding bit shall be set to 1. Where a pump " +
+                "controller function is not active, the corresponding bit shall be set to 0.",
+            xref: { document: "cluster", section: "4.2.7.14" },
+        },
+        {
+            tag: "attribute",
+            name: "EffectiveOperationMode",
+            id: 0x11,
+            type: "OperationModeEnum",
+            access: "R V",
+            conformance: "M",
+            constraint: "desc",
+            quality: "N",
+            details: "This attribute specifies current effective operation mode of the pump as defined in " +
+                "OperationModeEnum." +
+                "\n" +
+                "The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, " +
+                "unless one of the following points are true:" +
+                "\n" +
+                "  • The pump is physically set to run with the local settings" +
+                "\n" +
+                "  • The LocalOverride bit in the PumpStatus attribute is set," +
+                "\n" +
+                "See OperationMode and ControlMode attributes for a detailed description of the operation and " +
+                "control of the pump.",
+            xref: { document: "cluster", section: "4.2.7.15" },
+        },
+        {
+            tag: "attribute",
+            name: "EffectiveControlMode",
+            id: 0x12,
+            type: "ControlModeEnum",
+            access: "R V",
+            conformance: "M",
+            constraint: "desc",
+            quality: "N",
+            details: "This attribute specifies the current effective control mode of the pump as defined in " +
+                "ControlModeEnum." +
+                "\n" +
+                "This attribute contains the control mode that currently applies to the pump. It will have the value " +
+                "of the ControlMode attribute, unless one of the following points are true:" +
+                "\n" +
+                "  • The ControlMode attribute is set to Automatic. In this case, the value of the " +
+                "    EffectiveControlMode shall match the behavior of the pump." +
+                "\n" +
+                "  • A remote sensor is used as the sensor for regulation of the pump. In this case, " +
+                "    EffectiveControlMode will display ConstantPressure, ConstantFlow or ConstantTemperature if the " +
+                "    remote sensor is a pressure sensor, a flow sensor or a temperature sensor respectively, " +
+                "    regardless of the value of the ControlMode attribute." +
+                "\n" +
+                "In case the ControlMode attribute is not included on the device and no remote sensors are " +
+                "connected, the value of the EffectiveControlMode shall match the vendor-specific behavior of the " +
+                "pump." +
+                "\n" +
+                "See OperationMode and ControlMode attributes for detailed a description of the operation and " +
+                "control of the pump.",
+            xref: { document: "cluster", section: "4.2.7.16" },
+        },
+        {
+            tag: "attribute",
+            name: "Capacity",
+            id: 0x13,
+            type: "int16",
+            access: "R V",
+            conformance: "M",
+            constraint: "min 0",
+            default: null,
+            quality: "X P",
+            details: "This attribute specifies the actual capacity of the pump as a percentage of the effective maximum " +
+                "setpoint value. It is updated dynamically as the speed of the pump changes." +
+                "\n" +
+                "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
+                "this attribute will indicate the null value." +
+                "\n" +
+                "Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, " +
+                "values of capacity less than zero have no physical meaning.",
+            xref: { document: "cluster", section: "4.2.7.17" },
+        },
+        {
+            tag: "attribute",
+            name: "Speed",
+            id: 0x14,
+            type: "uint16",
+            access: "R V",
+            conformance: "O",
+            constraint: "max 65534",
+            default: null,
+            quality: "X",
+            details: "This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as " +
+                "the speed of the pump changes." +
+                "\n" +
+                "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
+                "this attribute will indicate the null value." +
+                "\n" +
+                "Valid range is 0 to 65.534 RPM.",
+            xref: { document: "cluster", section: "4.2.7.18" },
+        },
+        {
+            tag: "attribute",
+            name: "LifetimeRunningHours",
+            id: 0x15,
+            type: "uint24",
+            access: "RW VM",
+            conformance: "O",
+            default: 0,
+            quality: "X N",
+            details: "This attribute specifies the accumulated number of hours that the pump has been powered and the " +
+                "motor has been running. It is updated dynamically as it increases. It is preserved over power " +
+                "cycles of the pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at " +
+                "0 (zero)." +
+                "\n" +
+                "This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If" +
+                "\n" +
+                "the value is not available, this attribute will indicate the null value. Valid range is 0 to " +
+                "16,777,214 hrs.",
+            xref: { document: "cluster", section: "4.2.7.19" },
+        },
+        {
+            tag: "attribute",
+            name: "Power",
+            id: 0x16,
+            type: "uint24",
+            access: "R V",
+            conformance: "O",
+            default: null,
+            quality: "X",
+            details: "This attribute specifies the actual power consumption of the pump in Watts. The value of this " +
+                "attribute is updated dynamically as the power consumption of the pump changes." +
+                "\n" +
+                "This attribute is read only. If the value is not available (the measurement of power consumption is " +
+                "not done in the pump), this attribute will indicate the null value." +
+                "\n" +
+                "Valid range is 0 to 16,777,214 Watts.",
+            xref: { document: "cluster", section: "4.2.7.20" },
+        },
+        {
+            tag: "attribute",
+            name: "LifetimeEnergyConsumed",
+            id: 0x17,
+            type: "uint32",
+            access: "RW VM",
+            conformance: "O",
+            default: 0,
+            quality: "X N",
+            details: "This attribute specifies the accumulated energy consumption of the pump through the entire lifetime " +
+                "of the pump in kWh. The value of the LifetimeEnergyConsumed attribute is updated dynamically as the " +
+                "energy consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it " +
+                "“rolls over” and starts at 0 (zero)." +
+                "\n" +
+                "This attribute is writeable, in order to allow setting to an appropriate value after maintenance." +
+                "\n" +
+                "Valid range is 0 kWh to 4,294,967,294 kWh." +
+                "\n" +
+                "This attribute shall be null if the value is unknown.",
+            xref: { document: "cluster", section: "4.2.7.21" },
+        },
+        {
+            tag: "attribute",
+            name: "OperationMode",
+            id: 0x20,
+            type: "OperationModeEnum",
+            access: "RW VM",
+            conformance: "M",
+            constraint: "desc",
+            default: 0,
+            quality: "N",
+            details: "This attribute specifies the operation mode of the pump as defined in OperationModeEnum." +
+                "\n" +
+                "The actual operating mode of the pump is a result of the setting of the attributes OperationMode, " +
+                "ControlMode and the optional connection of a remote sensor. The operation and control is " +
+                "prioritized as shown in the scheme below:" +
+                "\n" +
+                "Priority Scheme of Pump Operation and Control" +
+                "\n" +
+                "If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is " +
+                "operated." +
+                "\n" +
+                "If this attribute is Normal and a remote sensor is connected to the pump, the type of the remote " +
+                "sensor decides the control mode of the pump. A connected remote pressure sensor will make the pump " +
+                "run in control mode Constant pressure and vice versa for flow and temperature type sensors. This is " +
+                "regardless of the setting of the ControlMode attribute." +
+                "\n" +
+                "If this attribute is Normal and no remote sensor is connected, the control mode of the pump is " +
+                "decided by the ControlMode attribute." +
+                "\n" +
+                "OperationMode may be changed at any time, even when the pump is running. The behavior of the pump " +
+                "at the point of changing the value of this attribute is vendor-specific." +
+                "\n" +
+                "In the case a device does not support a specific operation mode, the write interaction to this " +
+                "attribute with an unsupported operation mode value shall be ignored and a response containing the " +
+                "status of CONSTRAINT_ERROR shall be returned.",
+            xref: { document: "cluster", section: "4.2.7.22" },
+        },
+        {
+            tag: "attribute",
+            name: "ControlMode",
+            id: 0x21,
+            type: "ControlModeEnum",
+            access: "RW VM",
+            conformance: "O",
+            constraint: "desc",
+            default: 0,
+            quality: "N",
+            details: "This attribute specifies the control mode of the pump as defined in ControlModeEnum." +
+                "\n" +
+                "See the OperationMode attribute for a detailed description of the operation and control of the" +
+                "\n" +
+                "pump." +
+                "\n" +
+                "ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at " +
+                "the point of changing is vendor-specific." +
+                "\n" +
+                "In the case a device does not support a specific control mode, the write interaction to this " +
+                "attribute with an unsupported control mode value shall be ignored and a response containing the " +
+                "status of CONSTRAINT_ERROR shall be returned.",
+            xref: { document: "cluster", section: "4.2.7.23" },
+        },
+        {
+            tag: "attribute",
+            name: "AlarmMask",
+            id: 0x1d,
+            type: "map16",
+            access: "R V",
+            conformance: "D",
+            constraint: "desc",
+            default: 0,
+            quality: "N",
+            xref: { document: "cluster", section: "4.2.7" },
+            children: [
+                {
+                    tag: "datatype",
+                    name: "InitializationFailure",
+                    constraint: "0",
+                    details: "The device failed to complete initialization at powerup",
+                },
+                {
+                    tag: "datatype",
+                    name: "HardwareFailure",
+                    constraint: "1",
+                    details: "The device has detected a hardware fault",
+                },
+                {
+                    tag: "datatype",
+                    name: "SelfCalibrationFailure",
+                    constraint: "2",
+                    details: "The device was unable to complete self calibration",
+                },
+            ],
+        },
+        {
+            tag: "event",
+            name: "SupplyVoltageLow",
+            id: 0x0,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "SupplyVoltageHigh",
+            id: 0x1,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "PowerMissingPhase",
+            id: 0x2,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "SystemPressureLow",
+            id: 0x3,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "SystemPressureHigh",
+            id: 0x4,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "DryRunning",
+            id: 0x5,
+            access: "V",
+            conformance: "O",
+            priority: "critical",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "MotorTemperatureHigh",
+            id: 0x6,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "PumpMotorFatalFailure",
+            id: 0x7,
+            access: "V",
+            conformance: "O",
+            priority: "critical",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "ElectronicTemperatureHigh",
+            id: 0x8,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "PumpBlocked",
+            id: 0x9,
+            access: "V",
+            conformance: "O",
+            priority: "critical",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "SensorFailure",
+            id: 0xa,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "ElectronicNonFatalFailure",
+            id: 0xb,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "ElectronicFatalFailure",
+            id: 0xc,
+            access: "V",
+            conformance: "O",
+            priority: "critical",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "GeneralFault",
+            id: 0xd,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "Leakage",
+            id: 0xe,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "AirDetection",
+            id: 0xf,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "event",
+            name: "TurbineOperation",
+            id: 0x10,
+            access: "V",
+            conformance: "O",
+            priority: "info",
+            xref: { document: "cluster", section: "4.2.8" },
+        },
+        {
+            tag: "datatype",
+            name: "PumpStatusBitmap",
+            type: "map16",
+            conformance: "M",
+            xref: { document: "cluster", section: "4.2.6.1" },
+            children: [
+                {
+                    tag: "datatype",
+                    name: "DeviceFault",
+                    constraint: "0",
+                    description: "A fault related to the system or pump device is detected.",
+                    details: "If this bit is set, it may correspond to an event in the range 2-16, see Events.",
+                    xref: { document: "cluster", section: "4.2.6.1.1" },
+                },
+                {
+                    tag: "datatype",
+                    name: "SupplyFault",
+                    constraint: "1",
+                    description: "A fault related to the supply to the pump is detected.",
+                    details: "If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.",
+                    xref: { document: "cluster", section: "4.2.6.1.2" },
+                },
+                { tag: "datatype", name: "SpeedLow", constraint: "2", description: "Setpoint is too low to achieve." },
+                {
+                    tag: "datatype",
+                    name: "SpeedHigh",
+                    constraint: "3",
+                    description: "Setpoint is too high to achieve.",
+                },
+                {
+                    tag: "datatype",
+                    name: "LocalOverride",
+                    constraint: "4",
+                    description: "Device control is overridden by hardware, such as an external STOP button or via a local HMI.",
+                    details: "While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing " +
+                        "OperationMode shall generate a FAILURE error status until LocalOverride is cleared on the physical " +
+                        "device. When LocalOverride is cleared, the device shall return to the operation mode set in " +
+                        "OperationMode.",
+                    xref: { document: "cluster", section: "4.2.6.1.3" },
+                },
+                { tag: "datatype", name: "Running", constraint: "5", description: "Pump is currently running" },
+                {
+                    tag: "datatype",
+                    name: "RemotePressure",
+                    constraint: "6",
+                    description: "A remote pressure sensor is used as the sensor for the regulation of the pump.",
+                    details: "If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is " +
+                        "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
+                        "MaxMeasuredValue]).",
+                    xref: { document: "cluster", section: "4.2.6.1.4" },
+                },
+                {
+                    tag: "datatype",
+                    name: "RemoteFlow",
+                    constraint: "7",
+                    description: "A remote flow sensor is used as the sensor for the regulation of the pump.",
+                    details: "If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is " +
+                        "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
+                        "MaxMeasuredValue]).",
+                    xref: { document: "cluster", section: "4.2.6.1.5" },
+                },
+                {
+                    tag: "datatype",
+                    name: "RemoteTemperature",
+                    constraint: "8",
+                    description: "A remote temperature sensor is used as the sensor for the regulation of the pump.",
+                    details: "If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is " +
+                        "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
+                        "MaxMeasuredValue])",
+                    xref: { document: "cluster", section: "4.2.6.1.6" },
+                },
+            ],
+        },
+        {
+            tag: "datatype",
+            name: "OperationModeEnum",
+            type: "enum8",
+            conformance: "M",
+            xref: { document: "cluster", section: "4.2.6.2" },
+            children: [
+                {
+                    tag: "datatype",
+                    name: "Normal",
+                    id: 0x0,
+                    conformance: "M",
+                    description: "The pump is controlled by a setpoint, as defined by a connected remote sensor or by the ControlMode attribute.",
+                    details: "If the pump is running in this operation mode the setpoint is an internal variable which may be " +
+                        "controlled between 0% and 100%, e.g., by means of the Level Control cluster",
+                    xref: { document: "cluster", section: "4.2.6.2.1" },
+                },
+                {
+                    tag: "datatype",
+                    name: "Minimum",
+                    id: 0x1,
+                    conformance: "SPD",
+                    description: "This value sets the pump to run at the minimum possible speed it can without being stopped.",
+                },
+                {
+                    tag: "datatype",
+                    name: "Maximum",
+                    id: 0x2,
+                    conformance: "SPD",
+                    description: "This value sets the pump to run at its maximum possible speed.",
+                },
+                {
+                    tag: "datatype",
+                    name: "Local",
+                    id: 0x3,
+                    conformance: "LOCAL",
+                    description: "This value sets the pump to run with the local settings of the pump, regardless of what these are.",
+                },
+            ],
+        },
+        {
+            tag: "datatype",
+            name: "ControlModeEnum",
+            type: "enum8",
+            conformance: "M",
+            xref: { document: "cluster", section: "4.2.6.3" },
+            children: [
+                {
+                    tag: "datatype",
+                    name: "ConstantSpeed",
+                    id: 0x0,
+                    conformance: "SPD",
+                    description: "The pump is running at a constant speed.",
+                    details: "The setpoint is interpreted as a percentage of the range derived from the [MinConstSpeed – " +
+                        "MaxConstSpeed] attributes.",
+                    xref: { document: "cluster", section: "4.2.6.3.1" },
+                },
+                {
+                    tag: "datatype",
+                    name: "ConstantPressure",
+                    id: 0x1,
+                    conformance: "PRSCONST",
+                    description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
+                    details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
+                        "In case of the internal pressure sensor, this will be the range derived from the [MinConstPressure " +
+                        "– MaxConstPressure] attributes. In case of a remote pressure sensor, this will be the range derived " +
+                        "from the [MinMeasuredValue – MaxMeasuredValue] attributes of the remote pressure sensor.",
+                    xref: { document: "cluster", section: "4.2.6.3.2" },
+                },
+                {
+                    tag: "datatype",
+                    name: "ProportionalPressure",
+                    id: 0x2,
+                    conformance: "PRSCOMP",
+                    description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
+                    details: "The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – " +
+                        "MaxCompPressure] attributes. The internal setpoint will be lowered (compensated) dependent on the " +
+                        "flow in the pump (lower flow ⇒ lower internal setpoint).",
+                    xref: { document: "cluster", section: "4.2.6.3.3" },
+                },
+                {
+                    tag: "datatype",
+                    name: "ConstantFlow",
+                    id: 0x3,
+                    conformance: "FLW",
+                    description: "The pump will regulate its speed to maintain a constant flow through the pump.",
+                    details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
+                        "In case of the internal flow sensor, this will be the range derived from the [MinConstFlow – " +
+                        "MaxConstFlow] attributes. In case of a remote flow sensor, this will be the range derived from the " +
+                        "[MinMeasuredValue – MaxMeasuredValue] attributes of the remote flow sensor.",
+                    xref: { document: "cluster", section: "4.2.6.3.4" },
+                },
+                {
+                    tag: "datatype",
+                    name: "ConstantTemperature",
+                    id: 0x5,
+                    conformance: "TEMP",
+                    description: "The pump will regulate its speed to maintain a constant temperature.",
+                    details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
+                        "In case of the internal temperature sensor, this will be the range derived from the [MinConstTemp – " +
+                        "MaxConstTemp] attributes. In case of a remote temperature sensor, this will be the range derived " +
+                        "from the [MinMeasuredValue – MaxMeasuredValue] attributes of the remote temperature sensor.",
+                    xref: { document: "cluster", section: "4.2.6.3.5" },
+                },
+                {
+                    tag: "datatype",
+                    name: "Automatic",
+                    id: 0x7,
+                    conformance: "AUTO",
+                    description: "The operation of the pump is automatically optimized to provide the most suitable performance with respect to comfort and energy savings.",
+                    details: "This behavior is manufacturer defined. The pump can be stopped by setting the setpoint of the level " +
+                        "control cluster to 0, or by using the On/Off cluster. If the pump is started (at any setpoint), the " +
+                        "speed of the pump is entirely determined by the pump.",
+                    xref: { document: "cluster", section: "4.2.6.3.6" },
+                },
+            ],
+        },
+    ],
+});
+//# sourceMappingURL=PumpConfigurationAndControl.js.map