@project-chip/matter.js 0.4.0 → 0.5.0

package/dist/cjs/cluster/definitions/ActionsCluster.d.ts

@@ -0,0 +1,1383 @@
+/**
+ * @license
+ * Copyright 2022-2023 Project CHIP Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+import { Cluster as CreateCluster, Attribute, OptionalAttribute, OptionalCommand, Event } from "../../cluster/Cluster.js";
+import { BitFlag } from "../../schema/BitmapSchema.js";
+export declare namespace Actions {
+    /**
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.2
+     */
+    const enum ActionType {
+        /**
+         * Use this only when none of the other values applies
+         */
+        Other = 0,
+        /**
+         * Bring the endpoints into a certain state
+         *
+         * Can be used to set a static state of the associated endpoints (typically using InstantAction or
+         * InstantActionWithTransition), or to bring these endpoints into a more dynamic state (typically using
+         * StartAction), where the endpoints would e.g. gradually cycle through certain colors for a pleasing effect. A
+         * voice controller could use "set" (to map to InstantAction) or "play" (to map to StartAction) to trig
+         *
+         * ger such actions.
+         *
+         * Example: see examples 1 and 2.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.2.1
+         */
+        Scene = 1,
+        /**
+         * A sequence of states with a certain time pattern
+         *
+         * Indicates an action which involves a sequence of events/states of the associated endpoints, such as a
+         * wake-up experience.
+         *
+         * Example: see example 4.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.2.2
+         */
+        Sequence = 2,
+        /**
+         * Control an automation (e.g. motion sensor controlling lights)
+         *
+         * Indications an automation (e.g. a motion sensor controlling lights, an alarm system) which can bee.g.
+         * started, stopped, paused, resumed. Example: see example 3.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.2.3
+         */
+        Automation = 3,
+        /**
+         * Sequence that will run when something doesn’t happen
+         *
+         * Indicates some action which the server will execute when a certain condition (which normally does not
+         * happen) is not met.
+         *
+         * Example: lock the doors when the server’s system has detected no one is at home while the doors are in the
+         * 'unlocked' state.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.2.4
+         */
+        Exception = 4,
+        /**
+         * Use the endpoints to send a message to user
+         *
+         * Indicates an action that can be triggered (e.g. by InstantAction) to notify the user.
+         *
+         * Example: play a pattern on the lights in the living room if there is someone in the garden in the evening.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.2.5
+         */
+        Notification = 5,
+        /**
+         * Higher priority notification
+         *
+         * Similar to Notification but with a higher priority (and might override other endpoint states which
+         * Type=Notification would not override).
+         *
+         * Example: flash all lights in the house when CO sensor triggers.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.2.6
+         */
+        Alarm = 6
+    }
+    /**
+     * Note - The bit allocation of this bitmap shall follow the ID’s of the Commands of this cluster.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.1
+     */
+    const CommandBits: {
+        /**
+         * Indicate support for InstantAction command
+         */
+        instantAction: BitFlag;
+        /**
+         * Indicate support for InstantActionWithTransition command
+         */
+        instantActionWithTransition: BitFlag;
+        /**
+         * Indicate support for StartAction command
+         */
+        startAction: BitFlag;
+        /**
+         * Indicate support for StartActionWithDuration command
+         */
+        startActionWithDuration: BitFlag;
+        /**
+         * Indicate support for StopAction command
+         */
+        stopAction: BitFlag;
+        /**
+         * Indicate support for PauseAction command
+         */
+        pauseAction: BitFlag;
+        /**
+         * Indicate support for PauseActionWithDuration command
+         */
+        pauseActionWithDuration: BitFlag;
+        /**
+         * Indicate support for ResumeAction command
+         */
+        resumeAction: BitFlag;
+        /**
+         * Indicate support for EnableAction command
+         */
+        enableAction: BitFlag;
+        /**
+         * Indicate support for EnableActionWithDuration command
+         */
+        enableActionWithDuration: BitFlag;
+        /**
+         * Indicate support for DisableAction command
+         */
+        disableAction: BitFlag;
+        /**
+         * Indicate support for DisableActionWithDuration command
+         */
+        disableActionWithDuration: BitFlag;
+    };
+    /**
+     * Note that some of these states are applicable only for certain actions, as determined by their SupportedCommands.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.3
+     */
+    const enum ActionState {
+        /**
+         * The action is not active
+         */
+        Inactive = 0,
+        /**
+         * The action is active
+         */
+        Active = 1,
+        /**
+         * The action has been paused
+         */
+        Paused = 2,
+        /**
+         * The action has been disabled
+         */
+        Disabled = 3
+    }
+    /**
+     * This data type holds the details of a single action, and contains the data fields below.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6
+     */
+    const TlvActionStruct: import("../../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * This field shall provide an unique identifier used to identify an action.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.1
+         */
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field shall indicate the name (as assigned by the user or automatically by the server) associated with
+         * this action. This can be used for identifying the action to the user by the client. Example: "my colorful
+         * scene".
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.2
+         */
+        name: import("../../tlv/TlvObject.js").FieldType<string>;
+        /**
+         * This field shall indicate the type of action. The value of Type of an action, along with its
+         * SupportedCommands can be used by the client in its UX or logic to determine how to present or use such
+         * action. See ActionTypeEnum for details and examples.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.3
+         */
+        type: import("../../tlv/TlvObject.js").FieldType<ActionType>;
+        /**
+         * This field shall provide a reference to the associated endpoint list, which specifies the endpoints on this
+         * Node which will be impacted by this ActionID.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.4
+         */
+        endpointListId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field is a bitmap which shall be used to indicate which of the cluster’s commands are sup
+         *
+         * ported for this particular action, with a bit set to 1 for each supported command according to the table
+         * below. Other bits shall be set to 0.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.5
+         */
+        supportedCommands: import("../../tlv/TlvObject.js").FieldType<import("../../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+            /**
+             * Indicate support for InstantAction command
+             */
+            instantAction: BitFlag;
+            /**
+             * Indicate support for InstantActionWithTransition command
+             */
+            instantActionWithTransition: BitFlag;
+            /**
+             * Indicate support for StartAction command
+             */
+            startAction: BitFlag;
+            /**
+             * Indicate support for StartActionWithDuration command
+             */
+            startActionWithDuration: BitFlag;
+            /**
+             * Indicate support for StopAction command
+             */
+            stopAction: BitFlag;
+            /**
+             * Indicate support for PauseAction command
+             */
+            pauseAction: BitFlag;
+            /**
+             * Indicate support for PauseActionWithDuration command
+             */
+            pauseActionWithDuration: BitFlag;
+            /**
+             * Indicate support for ResumeAction command
+             */
+            resumeAction: BitFlag;
+            /**
+             * Indicate support for EnableAction command
+             */
+            enableAction: BitFlag;
+            /**
+             * Indicate support for EnableActionWithDuration command
+             */
+            enableActionWithDuration: BitFlag;
+            /**
+             * Indicate support for DisableAction command
+             */
+            disableAction: BitFlag;
+            /**
+             * Indicate support for DisableActionWithDuration command
+             */
+            disableActionWithDuration: BitFlag;
+        }>>;
+        /**
+         * This field shall indicate the current state of this action.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.6
+         */
+        state: import("../../tlv/TlvObject.js").FieldType<ActionState>;
+    }>;
+    /**
+     * The Room and Zone values are provided for the cases where a user (or the system on behalf of the user) has
+     * created logical grouping of the endpoints (e.g. bridged devices) based on location.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.5
+     */
+    const enum EndpointListType {
+        /**
+         * Another group of endpoints
+         *
+         * This value is provided for the case of an endpoint list which is tied specifically to this action i.e. not
+         * independently created by the user. For Type=Other the Name may be empty. A Matter controller would typically
+         * not use this for anything else than just to know which endpoints would be affected by the action.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.5.1
+         */
+        Other = 0,
+        /**
+         * User-configured group of endpoints where an endpoint can be in only one room
+         *
+         * Is used for the situation where an endpoint can only be part of one such rooms (e.g. physical mapping).
+         * Using these exposed logical groups, a Matter controller who has a similar grouping concept can use it to
+         * place each endpoint (bridged device) in the right room automatically, without user having to redo that setup
+         * for each device in each system - both at first contact and upon later updates to the endpoints (e.g. user
+         * adds a bridged device or creates a new room).
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.5.2
+         */
+        Room = 1,
+        /**
+         * User-configured group of endpoints where an endpoint can be in any number of zones
+         *
+         * Is a more general concept where an endpoint can be part of multiple zones, e.g. a light in the living
+         *
+         * room can be part of the "reading corner" zone (subset of the lights in the living room) but also part of the
+         * "downstairs" zone which contains all the lights on a floor, e.g. combining living room, kitchen and hallway.
+         * This indicates that a user has defined this list of endpoints as something they logically would like to
+         * control as a group, so Matter controllers could provide the user with a way to do as such.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.5.3
+         */
+        Zone = 2
+    }
+    /**
+     * This data type holds the details of a single endpoint list, which relates to a set of endpoints that have some
+     * logical relation, and contains the data fields below.
+     *
+     * This field shall provide an unique identifier used to identify the endpoint list.
+     *
+     * This field shall indicate the name (as assigned by the user or automatically by the server) associated with the
+     * set of endpoints in this list. This can be used for identifying the action to the user by the client. Example:
+     * "living room".
+     *
+     * This field shall indicate the type of endpoint list, see EndpointListTypeEnum.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.7
+     */
+    const TlvEndpointListStruct: import("../../tlv/TlvObject.js").ObjectSchema<{
+        endpointListId: import("../../tlv/TlvObject.js").FieldType<number>;
+        name: import("../../tlv/TlvObject.js").FieldType<string>;
+        type: import("../../tlv/TlvObject.js").FieldType<EndpointListType>;
+        /**
+         * This field shall provide a list of endpoint numbers.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.7.1
+         */
+        endpoints: import("../../tlv/TlvObject.js").FieldType<import("../../datatype/EndpointNumber.js").EndpointNumber[]>;
+    }>;
+    /**
+     * Input to the Actions instantAction command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.1
+     */
+    const TlvInstantActionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the Actions instantActionWithTransition command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.2
+     */
+    const TlvInstantActionWithTransitionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        /**
+         * This field shall indicate the transition time in 1/10th of seconds.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.2.1
+         */
+        transitionTime: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>;
+    /**
+     * Input to the Actions startAction command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.3
+     */
+    const TlvStartActionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the Actions startActionWithDuration command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.4
+     */
+    const TlvStartActionWithDurationRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        /**
+         * This field shall indicate the requested duration in seconds.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.4.1
+         */
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>;
+    /**
+     * Input to the Actions stopAction command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.5
+     */
+    const TlvStopActionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the Actions pauseAction command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.6
+     */
+    const TlvPauseActionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the Actions pauseActionWithDuration command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.7
+     */
+    const TlvPauseActionWithDurationRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>;
+    /**
+     * Input to the Actions resumeAction command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.8
+     */
+    const TlvResumeActionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the Actions enableAction command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.9
+     */
+    const TlvEnableActionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the Actions enableActionWithDuration command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.10
+     */
+    const TlvEnableActionWithDurationRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>;
+    /**
+     * Input to the Actions disableAction command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.11
+     */
+    const TlvDisableActionRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the Actions disableActionWithDuration command
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.12
+     */
+    const TlvDisableActionWithDurationRequest: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>;
+    /**
+     * Body of the Actions stateChanged event
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1
+     */
+    const TlvStateChangedEvent: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field shall be set to the InvokeID which was provided to the most recent command referencing this
+         * ActionID.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1.1
+         */
+        invokeId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field shall be set to state that the action has changed to.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1.2
+         */
+        newState: import("../../tlv/TlvObject.js").FieldType<ActionState>;
+    }>;
+    /**
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.4
+     */
+    const enum ActionError {
+        /**
+         * Other reason not listed in the row(s) below
+         */
+        Unknown = 0,
+        /**
+         * The action was interrupted by another command or interaction
+         */
+        Interrupted = 1
+    }
+    /**
+     * Body of the Actions actionFailed event
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.2
+     */
+    const TlvActionFailedEvent: import("../../tlv/TlvObject.js").ObjectSchema<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").FieldType<number>;
+        newState: import("../../tlv/TlvObject.js").FieldType<ActionState>;
+        /**
+         * This field shall be set to indicate the reason for non-successful progress of the action.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.2.1
+         */
+        error: import("../../tlv/TlvObject.js").FieldType<ActionError>;
+    }>;
+    /**
+     * Actions
+     *
+     * This cluster provides a standardized way for a Node (typically a Bridge, but could be any Node) to expose
+     *
+     *   • Information about logical grouping of endpoints on the Node (example: lights in a room)
+     *
+     *   • Information about named actions that can be performed on such a group of endpoints (example: recall a scene
+     *     for a group of lights by its name)
+     *
+     *   • Commands to trigger such actions
+     *
+     *   • Events to receive feedback on the state of such actions.
+     *
+     * The information on grouping and available actions is typically provided by the user or Bridge manufacturer via
+     * some means not defined in Matter, and therefore provided as read-only to Nodes. For example: a
+     * manufacturer-provided app allows a user to set up logical grouping and create/assign scene for such groups.
+     *
+     * Using this cluster, a Node can learn about such logical grouping, provided actions, and trigger such actions.
+     *
+     * While the origin of this cluster stems from use cases with a Bridge, its server side may also be implemented on
+     * any Node which can expose certain grouping, actions or automations to other users.
+     *
+     * After defining the attributes, commands and events for this cluster, and the associated data types, several
+     * examples are provided to illustrate the capabilities of this cluster.
+     *
+     * Actions can be defined in a flexible manner to suit the needs of the various nodes implementing this cluster.
+     * For each action, the commands available for that particular action are defined.
+     *
+     * This cluster can be used to expose only the grouping of endpoints without any actions defined by populating the
+     * EndpointList attribute accordingly and providing an empty list for ActionList.
+     *
+     * The term 'action' in the description of this cluster should not be confused with the term 'action' as used in
+     * the Interaction Model.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14
+     */
+    const Cluster: CreateCluster<import("../../schema/BitmapSchema.js").BitSchema, import("../../schema/BitmapSchema.js").TypeFromPartialBitSchema<import("../../schema/BitmapSchema.js").BitSchema>, import("../../util/Type.js").Merge<{
+        /**
+         * The ActionList attribute holds the list of actions. Each entry shall have an unique ActionID, and its
+         * EndpointListID shall exist in the EndpointLists attribute.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.5.1
+         */
+        actionList: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+            /**
+             * This field shall provide an unique identifier used to identify an action.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.1
+             */
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            /**
+             * This field shall indicate the name (as assigned by the user or automatically by the server) associated with
+             * this action. This can be used for identifying the action to the user by the client. Example: "my colorful
+             * scene".
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.2
+             */
+            name: import("../../tlv/TlvObject.js").FieldType<string>;
+            /**
+             * This field shall indicate the type of action. The value of Type of an action, along with its
+             * SupportedCommands can be used by the client in its UX or logic to determine how to present or use such
+             * action. See ActionTypeEnum for details and examples.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.3
+             */
+            type: import("../../tlv/TlvObject.js").FieldType<ActionType>;
+            /**
+             * This field shall provide a reference to the associated endpoint list, which specifies the endpoints on this
+             * Node which will be impacted by this ActionID.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.4
+             */
+            endpointListId: import("../../tlv/TlvObject.js").FieldType<number>;
+            /**
+             * This field is a bitmap which shall be used to indicate which of the cluster’s commands are sup
+             *
+             * ported for this particular action, with a bit set to 1 for each supported command according to the table
+             * below. Other bits shall be set to 0.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.5
+             */
+            supportedCommands: import("../../tlv/TlvObject.js").FieldType<import("../../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * Indicate support for InstantAction command
+                 */
+                instantAction: BitFlag;
+                /**
+                 * Indicate support for InstantActionWithTransition command
+                 */
+                instantActionWithTransition: BitFlag;
+                /**
+                 * Indicate support for StartAction command
+                 */
+                startAction: BitFlag;
+                /**
+                 * Indicate support for StartActionWithDuration command
+                 */
+                startActionWithDuration: BitFlag;
+                /**
+                 * Indicate support for StopAction command
+                 */
+                stopAction: BitFlag;
+                /**
+                 * Indicate support for PauseAction command
+                 */
+                pauseAction: BitFlag;
+                /**
+                 * Indicate support for PauseActionWithDuration command
+                 */
+                pauseActionWithDuration: BitFlag;
+                /**
+                 * Indicate support for ResumeAction command
+                 */
+                resumeAction: BitFlag;
+                /**
+                 * Indicate support for EnableAction command
+                 */
+                enableAction: BitFlag;
+                /**
+                 * Indicate support for EnableActionWithDuration command
+                 */
+                enableActionWithDuration: BitFlag;
+                /**
+                 * Indicate support for DisableAction command
+                 */
+                disableAction: BitFlag;
+                /**
+                 * Indicate support for DisableActionWithDuration command
+                 */
+                disableActionWithDuration: BitFlag;
+            }>>;
+            /**
+             * This field shall indicate the current state of this action.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.6
+             */
+            state: import("../../tlv/TlvObject.js").FieldType<ActionState>;
+        }>[], any>;
+        /**
+         * The EndpointLists attribute holds the list of endpoint lists. Each entry shall have an unique
+         * EndpointListID.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.5.2
+         */
+        endpointLists: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+            endpointListId: import("../../tlv/TlvObject.js").FieldType<number>;
+            name: import("../../tlv/TlvObject.js").FieldType<string>;
+            type: import("../../tlv/TlvObject.js").FieldType<EndpointListType>;
+            /**
+             * This field shall provide a list of endpoint numbers.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.7.1
+             */
+            endpoints: import("../../tlv/TlvObject.js").FieldType<import("../../datatype/EndpointNumber.js").EndpointNumber[]>;
+        }>[], any>;
+        /**
+         * The SetupURL attribute (when provided) shall indicate a URL; its syntax shall follow the syntax as
+         * specified in RFC 3986, max. 512 ASCII characters. The location referenced by this URL shall provide
+         * additional information for the actions provided:
+         *
+         *   • When used without suffix, it shall provide information about the various actions which the cluster
+         *     provides.
+         *
+         *     ◦ Example: SetupURL could take the value of example://Actions or https://domain.example/
+         *       Matter/bridgev1/Actions for this generic case (access generic info how to use actions provided by
+         *       this cluster).
+         *
+         *   • When used with a suffix of "/?a=" and the decimal value of ActionID for one of the actions, it may
+         *     provide information about that particular action. This could be a deeplink to
+         *     manufacturer-app/website (associated somehow to the server node) with the information/edit-screen
+         *     for this action so that the user can view and update details of the action, e.g. edit the scene, or
+         *     change the wake-up experience time period.
+         *
+         *     ◦ Example of SetupURL with suffix added: example://Actions/?a=12345 or
+         *       https://domain.example/Matter/bridgev1/Actions/?a=12345 for linking to specific info/editing of
+         *       the action with ActionID 0x3039.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.5.3
+         */
+        setupUrl: OptionalAttribute<string, any>;
+    }, import("../../cluster/Cluster.js").GlobalAttributes<import("../../schema/BitmapSchema.js").BitSchema>>, {
+        /**
+         * This command triggers an action (state change) on the involved endpoints, in a "fire and forget" manner.
+         * Afterwards, the action’s state shall be Inactive.
+         *
+         * Example: recall a scene on a number of lights.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.1
+         */
+        instantAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, void, any>;
+        /**
+         * It is recommended that, where possible (e.g., it is not possible for attributes with Boolean data type),
+         * a gradual transition SHOULD take place from the old to the new state over this time period. However, the
+         * exact transition is manufacturer dependent.
+         *
+         * This command triggers an action (state change) on the involved endpoints, with a specified time to
+         * transition from the current state to the new state. During the transition, the action’s state shall be
+         * Active. Afterwards, the action’s state shall be Inactive.
+         *
+         * Example: recall a scene on a number of lights, with a specified transition time.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.2
+         */
+        instantActionWithTransition: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            /**
+             * This field shall indicate the transition time in 1/10th of seconds.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.2.1
+             */
+            transitionTime: import("../../tlv/TlvObject.js").FieldType<number>;
+        }>, void, any>;
+        /**
+         * This command triggers the commencement of an action on the involved endpoints. Afterwards, the action’s
+         * state shall be Active.
+         *
+         * Example: start a dynamic lighting pattern (such as gradually rotating the colors around the setpoints of
+         * the scene) on a set of lights.
+         *
+         * Example: start a sequence of events such as a wake-up experience involving lights moving through several
+         * brightness/color combinations and the window covering gradually opening.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.3
+         */
+        startAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, void, any>;
+        /**
+         * This command triggers the commencement of an action on the involved endpoints, and shall change the
+         * action’s state to Active. After the specified Duration, the action will stop, and the action’s state
+         * shall change to Inactive.
+         *
+         * Example: start a dynamic lighting pattern (such as gradually rotating the colors around the setpoints of
+         * the scene) on a set of lights for 1 hour (Duration=3600).
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.4
+         */
+        startActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            /**
+             * This field shall indicate the requested duration in seconds.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.4.1
+             */
+            duration: import("../../tlv/TlvObject.js").FieldType<number>;
+        }>, void, any>;
+        /**
+         * This command stops the ongoing action on the involved endpoints. Afterwards, the action’s state shall be
+         * Inactive.
+         *
+         * Example: stop a dynamic lighting pattern which was previously started with StartAction.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.5
+         */
+        stopAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, void, any>;
+        /**
+         * This command pauses an ongoing action, and shall change the action’s state to Paused.
+         *
+         * Example: pause a dynamic lighting effect (the lights stay at their current color) which was previously
+         * started with StartAction.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.6
+         */
+        pauseAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, void, any>;
+        /**
+         * This command pauses an ongoing action, and shall change the action’s state to Paused. After the
+         * specified Duration, the ongoing action will be automatically resumed. which shall change the action’s
+         * state to Active.
+         *
+         * Example: pause a dynamic lighting effect (the lights stay at their current color) for 10 minutes
+         * (Duration=600).
+         *
+         * The difference between Pause/Resume and Disable/Enable is on the one hand semantic (the former is more
+         * of a transitionary nature while the latter is more permanent) and on the other hand these can be
+         * implemented slightly differently in the implementation of the action (e.g. a Pause would be
+         * automatically resumed after some hours or during a nightly reset, while an Disable would remain in
+         * effect until explicitly enabled again).
+         *
+         * This field shall indicate the requested duration in seconds.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.7
+         */
+        pauseActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            duration: import("../../tlv/TlvObject.js").FieldType<number>;
+        }>, void, any>;
+        /**
+         * This command resumes a previously paused action, and shall change the action’s state to Active.
+         *
+         * The difference between ResumeAction and StartAction is that ResumeAction will continue the action from
+         * the state where it was paused, while StartAction will start the action from the beginning.
+         *
+         * Example: resume a dynamic lighting effect (the lights' colors will change gradually, continuing from the
+         * point they were paused).
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.8
+         */
+        resumeAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, void, any>;
+        /**
+         * This command enables a certain action or automation. Afterwards, the action’s state shall be Active.
+         *
+         * Example: enable a motion sensor to control the lights in an area.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.9
+         */
+        enableAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, void, any>;
+        /**
+         * This command enables a certain action or automation, and shall change the action’s state to be Active.
+         * After the specified Duration, the action or automation will stop, and the action’s state shall change to
+         * Disabled.
+         *
+         * Example: enable a "presence mimicking" behavior for the lights in your home during a vacation; the
+         * Duration field is used to indicated the length of your absence from home. After that period, the
+         * presence mimicking behavior will no longer control these lights.
+         *
+         * This field shall indicate the requested duration in seconds.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.10
+         */
+        enableActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            duration: import("../../tlv/TlvObject.js").FieldType<number>;
+        }>, void, any>;
+        /**
+         * This command disables a certain action or automation, and shall change the action’s state to Inactive.
+         *
+         * Example: disable a motion sensor to no longer control the lights in an area.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.11
+         */
+        disableAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        }>, void, any>;
+        /**
+         * This command disables a certain action or automation, and shall change the action’s state to Disabled.
+         * After the specified Duration, the action or automation will re-start, and the action’s state shall
+         * change to either Inactive or Active, depending on the actions (see examples 4 and 6).
+         *
+         * Example: disable a "wakeup" experience for a period of 1 week when going on holiday (to prevent them
+         * from turning on in the morning while you’re not at home). After this period, the wakeup experience will
+         * control the lights as before.
+         *
+         * This field shall indicate the requested duration in seconds.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.12
+         */
+        disableActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+            duration: import("../../tlv/TlvObject.js").FieldType<number>;
+        }>, void, any>;
+    }, {
+        /**
+         * This event shall be generated when there is a change in the State of an ActionID during the execution of
+         * an action and the most recent command using that ActionID used an InvokeID data field.
+         *
+         * It provides feedback to the client about the progress of the action.
+         *
+         * Example: When InstantActionWithTransition is invoked (with an InvokeID data field), two StateChanged
+         * events will be generated:
+         *
+         *   • one when the transition starts (NewState=Active)
+         *
+         *   • one when the transition completed (NewState=Inactive) This event shall have the following data
+         *     fields:
+         *
+         * This field shall be set to the ActionID of the action which has changed state.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1
+         */
+        stateChanged: Event<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            /**
+             * This field shall be set to the InvokeID which was provided to the most recent command referencing this
+             * ActionID.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1.1
+             */
+            invokeId: import("../../tlv/TlvObject.js").FieldType<number>;
+            /**
+             * This field shall be set to state that the action has changed to.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1.2
+             */
+            newState: import("../../tlv/TlvObject.js").FieldType<ActionState>;
+        }>, any>;
+        /**
+         * This event shall be generated when there is some error which prevents the action from its normal planned
+         * execution and the most recent command using that ActionID used an InvokeID data field.
+         *
+         * It provides feedback to the client about the non-successful progress of the action.
+         *
+         * Example: When InstantActionWithTransition is invoked (with an InvokeID data field), and another
+         * controller changes the state of one or more of the involved endpoints during the transition, thus
+         * interrupting the transition triggered by the action, two events would be generated:
+         *
+         *   • StateChanged when the transition starts (NewState=Active)
+         *
+         *   • ActionFailed when the interrupting command occurs (NewState=Inactive, Error=interrupted)
+         *
+         * Example: When InstantActionWithTransition is invoked (with an InvokeID data field = 1), and the same
+         * client invokes an InstantAction with (the same or another ActionId and) InvokeID = 2, and this second
+         * command interrupts the transition triggered by the first command, these events would be generated:
+         *
+         *   • StateChanged (InvokeID=1, NewState=Active) when the transition starts
+         *
+         *   • ActionFailed (InvokeID=2, NewState=Inactive, Error=interrupted) when the second command interrupts
+         *     the transition
+         *
+         *   • StateChanged (InvokeID=2, NewState=Inactive) upon the execution of the action for the second command
+         *
+         * This event shall have the following data fields:
+         *
+         * This field shall be set to the ActionID of the action which encountered an error.
+         *
+         * This field shall be set to the InvokeID which was provided to the most recent command referencing this
+         * ActionID.
+         *
+         * This field shall be set to state that the action is in at the time of generating the event.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.2
+         */
+        actionFailed: Event<import("../../tlv/TlvObject.js").TypeFromFields<{
+            actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+            invokeId: import("../../tlv/TlvObject.js").FieldType<number>;
+            newState: import("../../tlv/TlvObject.js").FieldType<ActionState>;
+            /**
+             * This field shall be set to indicate the reason for non-successful progress of the action.
+             *
+             * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.2.1
+             */
+            error: import("../../tlv/TlvObject.js").FieldType<ActionError>;
+        }>, any>;
+    }>;
+}
+export type ActionsCluster = typeof Actions.Cluster;
+export declare const ActionsCluster: CreateCluster<import("../../schema/BitmapSchema.js").BitSchema, import("../../schema/BitmapSchema.js").TypeFromPartialBitSchema<import("../../schema/BitmapSchema.js").BitSchema>, import("../../util/Type.js").Merge<{
+    /**
+     * The ActionList attribute holds the list of actions. Each entry shall have an unique ActionID, and its
+     * EndpointListID shall exist in the EndpointLists attribute.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.5.1
+     */
+    actionList: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+        /**
+         * This field shall provide an unique identifier used to identify an action.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.1
+         */
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field shall indicate the name (as assigned by the user or automatically by the server) associated with
+         * this action. This can be used for identifying the action to the user by the client. Example: "my colorful
+         * scene".
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.2
+         */
+        name: import("../../tlv/TlvObject.js").FieldType<string>;
+        /**
+         * This field shall indicate the type of action. The value of Type of an action, along with its
+         * SupportedCommands can be used by the client in its UX or logic to determine how to present or use such
+         * action. See ActionTypeEnum for details and examples.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.3
+         */
+        type: import("../../tlv/TlvObject.js").FieldType<Actions.ActionType>;
+        /**
+         * This field shall provide a reference to the associated endpoint list, which specifies the endpoints on this
+         * Node which will be impacted by this ActionID.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.4
+         */
+        endpointListId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field is a bitmap which shall be used to indicate which of the cluster’s commands are sup
+         *
+         * ported for this particular action, with a bit set to 1 for each supported command according to the table
+         * below. Other bits shall be set to 0.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.5
+         */
+        supportedCommands: import("../../tlv/TlvObject.js").FieldType<import("../../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+            /**
+             * Indicate support for InstantAction command
+             */
+            instantAction: BitFlag;
+            /**
+             * Indicate support for InstantActionWithTransition command
+             */
+            instantActionWithTransition: BitFlag;
+            /**
+             * Indicate support for StartAction command
+             */
+            startAction: BitFlag;
+            /**
+             * Indicate support for StartActionWithDuration command
+             */
+            startActionWithDuration: BitFlag;
+            /**
+             * Indicate support for StopAction command
+             */
+            stopAction: BitFlag;
+            /**
+             * Indicate support for PauseAction command
+             */
+            pauseAction: BitFlag;
+            /**
+             * Indicate support for PauseActionWithDuration command
+             */
+            pauseActionWithDuration: BitFlag;
+            /**
+             * Indicate support for ResumeAction command
+             */
+            resumeAction: BitFlag;
+            /**
+             * Indicate support for EnableAction command
+             */
+            enableAction: BitFlag;
+            /**
+             * Indicate support for EnableActionWithDuration command
+             */
+            enableActionWithDuration: BitFlag;
+            /**
+             * Indicate support for DisableAction command
+             */
+            disableAction: BitFlag;
+            /**
+             * Indicate support for DisableActionWithDuration command
+             */
+            disableActionWithDuration: BitFlag;
+        }>>;
+        /**
+         * This field shall indicate the current state of this action.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.6.6
+         */
+        state: import("../../tlv/TlvObject.js").FieldType<Actions.ActionState>;
+    }>[], any>;
+    /**
+     * The EndpointLists attribute holds the list of endpoint lists. Each entry shall have an unique
+     * EndpointListID.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.5.2
+     */
+    endpointLists: Attribute<import("../../tlv/TlvObject.js").TypeFromFields<{
+        endpointListId: import("../../tlv/TlvObject.js").FieldType<number>;
+        name: import("../../tlv/TlvObject.js").FieldType<string>;
+        type: import("../../tlv/TlvObject.js").FieldType<Actions.EndpointListType>;
+        /**
+         * This field shall provide a list of endpoint numbers.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.4.7.1
+         */
+        endpoints: import("../../tlv/TlvObject.js").FieldType<import("../../datatype/EndpointNumber.js").EndpointNumber[]>;
+    }>[], any>;
+    /**
+     * The SetupURL attribute (when provided) shall indicate a URL; its syntax shall follow the syntax as
+     * specified in RFC 3986, max. 512 ASCII characters. The location referenced by this URL shall provide
+     * additional information for the actions provided:
+     *
+     *   • When used without suffix, it shall provide information about the various actions which the cluster
+     *     provides.
+     *
+     *     ◦ Example: SetupURL could take the value of example://Actions or https://domain.example/
+     *       Matter/bridgev1/Actions for this generic case (access generic info how to use actions provided by
+     *       this cluster).
+     *
+     *   • When used with a suffix of "/?a=" and the decimal value of ActionID for one of the actions, it may
+     *     provide information about that particular action. This could be a deeplink to
+     *     manufacturer-app/website (associated somehow to the server node) with the information/edit-screen
+     *     for this action so that the user can view and update details of the action, e.g. edit the scene, or
+     *     change the wake-up experience time period.
+     *
+     *     ◦ Example of SetupURL with suffix added: example://Actions/?a=12345 or
+     *       https://domain.example/Matter/bridgev1/Actions/?a=12345 for linking to specific info/editing of
+     *       the action with ActionID 0x3039.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.5.3
+     */
+    setupUrl: OptionalAttribute<string, any>;
+}, import("../../cluster/Cluster.js").GlobalAttributes<import("../../schema/BitmapSchema.js").BitSchema>>, {
+    /**
+     * This command triggers an action (state change) on the involved endpoints, in a "fire and forget" manner.
+     * Afterwards, the action’s state shall be Inactive.
+     *
+     * Example: recall a scene on a number of lights.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.1
+     */
+    instantAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>, void, any>;
+    /**
+     * It is recommended that, where possible (e.g., it is not possible for attributes with Boolean data type),
+     * a gradual transition SHOULD take place from the old to the new state over this time period. However, the
+     * exact transition is manufacturer dependent.
+     *
+     * This command triggers an action (state change) on the involved endpoints, with a specified time to
+     * transition from the current state to the new state. During the transition, the action’s state shall be
+     * Active. Afterwards, the action’s state shall be Inactive.
+     *
+     * Example: recall a scene on a number of lights, with a specified transition time.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.2
+     */
+    instantActionWithTransition: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        /**
+         * This field shall indicate the transition time in 1/10th of seconds.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.2.1
+         */
+        transitionTime: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>, void, any>;
+    /**
+     * This command triggers the commencement of an action on the involved endpoints. Afterwards, the action’s
+     * state shall be Active.
+     *
+     * Example: start a dynamic lighting pattern (such as gradually rotating the colors around the setpoints of
+     * the scene) on a set of lights.
+     *
+     * Example: start a sequence of events such as a wake-up experience involving lights moving through several
+     * brightness/color combinations and the window covering gradually opening.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.3
+     */
+    startAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>, void, any>;
+    /**
+     * This command triggers the commencement of an action on the involved endpoints, and shall change the
+     * action’s state to Active. After the specified Duration, the action will stop, and the action’s state
+     * shall change to Inactive.
+     *
+     * Example: start a dynamic lighting pattern (such as gradually rotating the colors around the setpoints of
+     * the scene) on a set of lights for 1 hour (Duration=3600).
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.4
+     */
+    startActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        /**
+         * This field shall indicate the requested duration in seconds.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.4.1
+         */
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>, void, any>;
+    /**
+     * This command stops the ongoing action on the involved endpoints. Afterwards, the action’s state shall be
+     * Inactive.
+     *
+     * Example: stop a dynamic lighting pattern which was previously started with StartAction.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.5
+     */
+    stopAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>, void, any>;
+    /**
+     * This command pauses an ongoing action, and shall change the action’s state to Paused.
+     *
+     * Example: pause a dynamic lighting effect (the lights stay at their current color) which was previously
+     * started with StartAction.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.6
+     */
+    pauseAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>, void, any>;
+    /**
+     * This command pauses an ongoing action, and shall change the action’s state to Paused. After the
+     * specified Duration, the ongoing action will be automatically resumed. which shall change the action’s
+     * state to Active.
+     *
+     * Example: pause a dynamic lighting effect (the lights stay at their current color) for 10 minutes
+     * (Duration=600).
+     *
+     * The difference between Pause/Resume and Disable/Enable is on the one hand semantic (the former is more
+     * of a transitionary nature while the latter is more permanent) and on the other hand these can be
+     * implemented slightly differently in the implementation of the action (e.g. a Pause would be
+     * automatically resumed after some hours or during a nightly reset, while an Disable would remain in
+     * effect until explicitly enabled again).
+     *
+     * This field shall indicate the requested duration in seconds.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.7
+     */
+    pauseActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>, void, any>;
+    /**
+     * This command resumes a previously paused action, and shall change the action’s state to Active.
+     *
+     * The difference between ResumeAction and StartAction is that ResumeAction will continue the action from
+     * the state where it was paused, while StartAction will start the action from the beginning.
+     *
+     * Example: resume a dynamic lighting effect (the lights' colors will change gradually, continuing from the
+     * point they were paused).
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.8
+     */
+    resumeAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>, void, any>;
+    /**
+     * This command enables a certain action or automation. Afterwards, the action’s state shall be Active.
+     *
+     * Example: enable a motion sensor to control the lights in an area.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.9
+     */
+    enableAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>, void, any>;
+    /**
+     * This command enables a certain action or automation, and shall change the action’s state to be Active.
+     * After the specified Duration, the action or automation will stop, and the action’s state shall change to
+     * Disabled.
+     *
+     * Example: enable a "presence mimicking" behavior for the lights in your home during a vacation; the
+     * Duration field is used to indicated the length of your absence from home. After that period, the
+     * presence mimicking behavior will no longer control these lights.
+     *
+     * This field shall indicate the requested duration in seconds.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.10
+     */
+    enableActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>, void, any>;
+    /**
+     * This command disables a certain action or automation, and shall change the action’s state to Inactive.
+     *
+     * Example: disable a motion sensor to no longer control the lights in an area.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.11
+     */
+    disableAction: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>, void, any>;
+    /**
+     * This command disables a certain action or automation, and shall change the action’s state to Disabled.
+     * After the specified Duration, the action or automation will re-start, and the action’s state shall
+     * change to either Inactive or Active, depending on the actions (see examples 4 and 6).
+     *
+     * Example: disable a "wakeup" experience for a period of 1 week when going on holiday (to prevent them
+     * from turning on in the morning while you’re not at home). After this period, the wakeup experience will
+     * control the lights as before.
+     *
+     * This field shall indicate the requested duration in seconds.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.6.12
+     */
+    disableActionWithDuration: OptionalCommand<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").OptionalFieldType<number>;
+        duration: import("../../tlv/TlvObject.js").FieldType<number>;
+    }>, void, any>;
+}, {
+    /**
+     * This event shall be generated when there is a change in the State of an ActionID during the execution of
+     * an action and the most recent command using that ActionID used an InvokeID data field.
+     *
+     * It provides feedback to the client about the progress of the action.
+     *
+     * Example: When InstantActionWithTransition is invoked (with an InvokeID data field), two StateChanged
+     * events will be generated:
+     *
+     *   • one when the transition starts (NewState=Active)
+     *
+     *   • one when the transition completed (NewState=Inactive) This event shall have the following data
+     *     fields:
+     *
+     * This field shall be set to the ActionID of the action which has changed state.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1
+     */
+    stateChanged: Event<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field shall be set to the InvokeID which was provided to the most recent command referencing this
+         * ActionID.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1.1
+         */
+        invokeId: import("../../tlv/TlvObject.js").FieldType<number>;
+        /**
+         * This field shall be set to state that the action has changed to.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.1.2
+         */
+        newState: import("../../tlv/TlvObject.js").FieldType<Actions.ActionState>;
+    }>, any>;
+    /**
+     * This event shall be generated when there is some error which prevents the action from its normal planned
+     * execution and the most recent command using that ActionID used an InvokeID data field.
+     *
+     * It provides feedback to the client about the non-successful progress of the action.
+     *
+     * Example: When InstantActionWithTransition is invoked (with an InvokeID data field), and another
+     * controller changes the state of one or more of the involved endpoints during the transition, thus
+     * interrupting the transition triggered by the action, two events would be generated:
+     *
+     *   • StateChanged when the transition starts (NewState=Active)
+     *
+     *   • ActionFailed when the interrupting command occurs (NewState=Inactive, Error=interrupted)
+     *
+     * Example: When InstantActionWithTransition is invoked (with an InvokeID data field = 1), and the same
+     * client invokes an InstantAction with (the same or another ActionId and) InvokeID = 2, and this second
+     * command interrupts the transition triggered by the first command, these events would be generated:
+     *
+     *   • StateChanged (InvokeID=1, NewState=Active) when the transition starts
+     *
+     *   • ActionFailed (InvokeID=2, NewState=Inactive, Error=interrupted) when the second command interrupts
+     *     the transition
+     *
+     *   • StateChanged (InvokeID=2, NewState=Inactive) upon the execution of the action for the second command
+     *
+     * This event shall have the following data fields:
+     *
+     * This field shall be set to the ActionID of the action which encountered an error.
+     *
+     * This field shall be set to the InvokeID which was provided to the most recent command referencing this
+     * ActionID.
+     *
+     * This field shall be set to state that the action is in at the time of generating the event.
+     *
+     * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.2
+     */
+    actionFailed: Event<import("../../tlv/TlvObject.js").TypeFromFields<{
+        actionId: import("../../tlv/TlvObject.js").FieldType<number>;
+        invokeId: import("../../tlv/TlvObject.js").FieldType<number>;
+        newState: import("../../tlv/TlvObject.js").FieldType<Actions.ActionState>;
+        /**
+         * This field shall be set to indicate the reason for non-successful progress of the action.
+         *
+         * @see {@link MatterCoreSpecificationV1_1} § 9.14.7.2.1
+         */
+        error: import("../../tlv/TlvObject.js").FieldType<Actions.ActionError>;
+    }>, any>;
+}>;
+//# sourceMappingURL=ActionsCluster.d.ts.map