@opentrons/shared-data 0.1.5 → 0.1.6-alpha.4

package/lib/errors/definitions/1/errors.json

@@ -1,226 +0,0 @@
-{
-    "categories": {
-        "hardwareCommunicationError": {
-            "detail": "Hardware communications failed",
-            "codePrefix": "1"
-        },
-        "roboticsControlError": {
-            "detail": "A robot action failed",
-            "codePrefix": "2"
-        },
-        "roboticsInteractionError": {
-            "detail": "A robot interaction failed",
-            "codePrefix": "3"
-        },
-        "generalError": {
-            "detail": "A software error occurred",
-            "codePrefix": "4"
-        }
-    },
-    "codes": {
-        "1000": {
-            "detail": "Communication Error",
-            "category": "hardwareCommunicationError"
-        },
-        "1001": {
-            "detail": "CANBus Communication Error",
-            "category": "hardwareCommunicationError"
-        },
-        "1002": {
-            "detail": "Internal USB Communication Error",
-            "category": "hardwareCommunicationError"
-        },
-        "1003": {
-            "detail": "Module Communication Error",
-            "category": "hardwareCommunicationError"
-        },
-        "1004": {
-            "detail": "Command Timed Out",
-            "category": "hardwareCommunicationError"
-        },
-        "1005": {
-            "detail": "Firmware Update Failed",
-            "category": "hardwareCommunicationError"
-        },
-        "1006": {
-            "detail": "Internal Message Format Error",
-            "category": "hardwareCommunicationError"
-        },
-        "1007": {
-            "detail": "CANBus Configuration Error",
-            "category": "hardwareCommunicationError"
-        },
-        "1008": {
-            "detail": "CANBus Bus Error",
-            "category": "hardwareCommunicationError"
-        },
-        "2000": {
-            "detail": "Robotics Control Error",
-            "category": "roboticsControlError"
-        },
-        "2001": {
-            "detail": "Motion Failed",
-            "category": "roboticsControlError"
-        },
-        "2002": {
-            "detail": "Homing Failed",
-            "category": "roboticsControlError"
-        },
-        "2003": {
-            "detail": "Stall or Collision Detected",
-            "category": "roboticsControlError"
-        },
-        "2004": {
-            "detail": "Motion Planning Failure",
-            "category": "roboticsControlError"
-        },
-        "2005": {
-            "detail": "Position Estimation Invalid",
-            "category": "roboticsControlError"
-        },
-        "2006": {
-            "detail": "Move Condition Not Met",
-            "category": "roboticsControlError"
-        },
-        "2007": {
-            "detail": "Calibration Structure Not Found",
-            "category": "roboticsControlError"
-        },
-        "2008": {
-            "detail": "Calibration Edge Not Found",
-            "category": "roboticsControlError"
-        },
-        "2009": {
-            "detail": "Early Capacitance Sense Trigger",
-            "category": "roboticsControlError"
-        },
-        "2010": {
-            "detail": "Inaccurate Non-Contact Sweep",
-            "category": "roboticsControlError"
-        },
-        "2011": {
-            "detail": "Misaligned Gantry",
-            "category": "roboticsControlError"
-        },
-        "2012": {
-            "detail": "Unmatched tip presence states",
-            "category": "roboticsControlError"
-        },
-        "2013": {
-            "detail": "Position Unknown",
-            "category": "roboticsControlError"
-        },
-        "2014": {
-            "detail": "Execution Cancelled",
-            "category": "roboticsControlError"
-        },
-        "2015": {
-            "detail": "Gripper Pickup Failed",
-            "category": "roboticsControlError"
-        },
-        "3000": {
-            "detail": "A robotics interaction error occurred.",
-            "category": "roboticsInteractionError"
-        },
-        "3001": {
-            "detail": "Labware Dropped",
-            "category": "roboticsInteractionError"
-        },
-        "3002": {
-            "detail": "Labware Not Picked Up",
-            "category": "roboticsInteractionError"
-        },
-        "3003": {
-            "detail": "Tip Pickup Failed",
-            "category": "roboticsInteractionError"
-        },
-        "3004": {
-            "detail": "Tip Drop Failed",
-            "category": "roboticsInteractionError"
-        },
-        "3005": {
-            "detail": "Unexpected Tip Removal",
-            "category": "roboticsInteractionError"
-        },
-        "3006": {
-            "detail": "Pipette Overpressure",
-            "category": "roboticsInteractionError"
-        },
-        "3008": {
-            "detail": "E-Stop Activated",
-            "category": "roboticsInteractionError"
-        },
-        "3009": {
-            "detail": "E-Stop Not Present",
-            "category": "roboticsInteractionError"
-        },
-        "3010": {
-            "detail": "Pipette Not Present",
-            "category": "roboticsInteractionError"
-        },
-        "3011": {
-            "detail": "Gripper Not Present",
-            "category": "roboticsInteractionError"
-        },
-        "3012": {
-            "detail": "Unexpected Tip Presence",
-            "category": "roboticsInteractionError"
-        },
-        "3013": {
-            "detail": "Firmware Update Required",
-            "category": "roboticsInteractionError"
-        },
-        "3014": {
-            "detail": "Invalid Actuator",
-            "category": "roboticsInteractionError"
-        },
-        "3015": {
-            "detail": "Module Not Present",
-            "category": "roboticsInteractionError"
-        },
-        "3016": {
-            "detail": "Invalid Instrument Data",
-            "category": "roboticsInteractionError"
-        },
-        "3017": {
-            "detail": "Invalid Liquid Class Name",
-            "category": "roboticsInteractionError"
-        },
-        "3018": {
-            "detail": "Tip Detector Not Created",
-            "category": "roboticsInteractionError"
-        },
-        "4000": {
-            "detail": "Unknown or Uncategorized Error",
-            "category": "generalError"
-        },
-        "4001": {
-            "detail": "Robot In Use",
-            "category": "generalError"
-        },
-        "4002": {
-            "detail": "API Removed",
-            "category": "generalError"
-        },
-        "4003": {
-            "detail": "Not supported on this robot type",
-            "category": "generalError"
-        },
-        "4004": {
-            "detail": "Command Precondition Violated",
-            "category": "generalError"
-        },
-        "4005": {
-            "detail": "Command Parameter Limit Violated",
-            "category": "generalError"
-        },
-        "4006": {
-            "detail": "Invalid Protocol Data",
-            "category": "generalError"
-        },
-        "4007": {
-            "detail": "API Command is misconfigured",
-            "category": "generalError"
-        }
-    }
-}

package/lib/errors/schemas/1.json

@@ -1,49 +0,0 @@
-{
-    "$schema": "http://json-schema.org/draft-07/schema#",
-    "definitions": {},
-    "description": "Error codes for ingestion into JS",
-    "type": "object",
-    "additionalProperties": false,
-    "properties": {
-        "categories": {
-            "description": "A map of error categories to specific information",
-            "type": "object",
-            "patternProperties": {
-                "^[a-zA-Z]+$": {
-                    "description": "A category and information about it",
-                    "properties": {
-                        "detail": {
-                            "type": "string",
-                            "description": "a short human-readable text description of the category"
-                        },
-                        "codePrefix": {
-                            "type": "string",
-                            "description": "All errors in this category start with this prefix",
-                            "regex": "^[0-9]+$"
-                        }
-                    }
-                }
-            }
-        },
-        "codes": {
-            "type": "object",
-            "patternProperties": {
-                "^[0-9]+$": {
-                    "type": "object",
-                    "properties": {
-                        "detail": {
-                            "type": "string",
-                            "description": "A short human-readable text description of the error"
-                        },
-                        "category": {
-                            "type": "string",
-                            "description": "json pointer to the error category"
-                        }
-                    }
-                }
-            },
-            "description": "A map of error codes to detail information",
-            "additionalProperties": false
-        }
-    }
-}

package/lib/gripper/definitions/1/gripperV1.1.json

@@ -1,29 +0,0 @@
-{
-    "$otSharedSchema": "gripper/schemas/1",
-    "model": "gripperV1.1",
-    "schemaVersion": 1,
-    "displayName": "Flex Gripper",
-    "gripForceProfile": {
-        "polynomial": [
-            [0, 4.1194669],
-            [1, 1.4181001],
-            [2, 0.0135956]
-        ],
-        "defaultGripForce": 15.0,
-        "defaultIdleForce": 10.0,
-        "defaultHomeForce": 12.0,
-        "min": 2.0,
-        "max": 30.0
-    },
-    "geometry": {
-        "baseOffsetFromMount": [19.5, -74.325, -94.825],
-        "jawCenterOffsetFromBase": [0.0, 0.0, -86.475],
-        "pinOneOffsetFromBase": [6.0, -54.0, -98.475],
-        "pinTwoOffsetFromBase": [6.0, 54.0, -98.475],
-        "jawWidth": {
-            "min": 60.0,
-            "max": 92.0
-        },
-        "maxAllowedGripError": 3.0
-    }
-}

package/lib/gripper/definitions/1/gripperV1.2.json

@@ -1,29 +0,0 @@
-{
-    "$otSharedSchema": "gripper/schemas/1",
-    "model": "gripperV1.2",
-    "schemaVersion": 1,
-    "displayName": "Flex Gripper",
-    "gripForceProfile": {
-        "polynomial": [
-            [0, 3.8361203],
-            [1, 1.3505968],
-            [2, 0.0221189]
-        ],
-        "defaultGripForce": 15.0,
-        "defaultIdleForce": 10.0,
-        "defaultHomeForce": 12.0,
-        "min": 2.0,
-        "max": 30.0
-    },
-    "geometry": {
-        "baseOffsetFromMount": [19.5, -74.325, -94.825],
-        "jawCenterOffsetFromBase": [0.0, 0.0, -86.475],
-        "pinOneOffsetFromBase": [6.0, -54.0, -98.475],
-        "pinTwoOffsetFromBase": [6.0, 54.0, -98.475],
-        "jawWidth": {
-            "min": 60.0,
-            "max": 92.0
-        },
-        "maxAllowedGripError": 3.0
-    }
-}

package/lib/gripper/definitions/1/gripperV1.json

@@ -1,28 +0,0 @@
-{
-    "$otSharedSchema": "gripper/schemas/1",
-    "model": "gripperV1",
-    "schemaVersion": 1,
-    "displayName": "Flex Gripper",
-    "gripForceProfile": {
-        "polynomial": [
-            [0, -0.282],
-            [1, 2.09]
-        ],
-        "defaultGripForce": 15.0,
-        "defaultIdleForce": 10.0,
-        "defaultHomeForce": 12.0,
-        "min": 5.0,
-        "max": 20.0
-    },
-    "geometry": {
-        "baseOffsetFromMount": [19.5, -74.325, -94.825],
-        "jawCenterOffsetFromBase": [0.0, 0.0, -88.475],
-        "pinOneOffsetFromBase": [4.0, -57.0, -100.475],
-        "pinTwoOffsetFromBase": [4.0, 57.0, -100.475],
-        "jawWidth": {
-            "min": 58.0,
-            "max": 90.0
-        },
-        "maxAllowedGripError": 6.0
-    }
-}

package/lib/gripper/schemas/1.json

@@ -1,186 +0,0 @@
-{
-    "title": "GripperDefinition",
-    "description": "Gripper definition.",
-    "type": "object",
-    "properties": {
-        "schemaVersion": {
-            "title": "Schemaversion",
-            "description": "Which schema version a gripper is using",
-            "enum": [1],
-            "type": "integer"
-        },
-        "displayName": {
-            "title": "Displayname",
-            "description": "Gripper display name.",
-            "type": "string"
-        },
-        "model": {
-            "$ref": "#/definitions/GripperModel"
-        },
-        "geometry": {
-            "$ref": "#/definitions/Geometry"
-        },
-        "gripForceProfile": {
-            "$ref": "#/definitions/GripForceProfile"
-        }
-    },
-    "required": [
-        "schemaVersion",
-        "displayName",
-        "model",
-        "geometry",
-        "gripForceProfile"
-    ],
-    "definitions": {
-        "GripperModel": {
-            "title": "GripperModel",
-            "description": "Gripper models.",
-            "enum": ["gripperV1", "gripperV1.1", "gripperV1.2"],
-            "type": "string"
-        },
-        "Geometry": {
-            "title": "Geometry",
-            "description": "Gripper geometry definition.",
-            "type": "object",
-            "properties": {
-                "baseOffsetFromMount": {
-                    "title": "Baseoffsetfrommount",
-                    "type": "array",
-                    "items": [
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        }
-                    ]
-                },
-                "jawCenterOffsetFromBase": {
-                    "title": "Jawcenteroffsetfrombase",
-                    "type": "array",
-                    "items": [
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        }
-                    ]
-                },
-                "pinOneOffsetFromBase": {
-                    "title": "Pinoneoffsetfrombase",
-                    "type": "array",
-                    "items": [
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        }
-                    ]
-                },
-                "pinTwoOffsetFromBase": {
-                    "title": "Pintwooffsetfrombase",
-                    "type": "array",
-                    "items": [
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        },
-                        {
-                            "type": "number"
-                        }
-                    ]
-                },
-                "jawWidth": {
-                    "title": "Jawwidth",
-                    "type": "object",
-                    "additionalProperties": {
-                        "type": "number"
-                    }
-                },
-                "maxAllowedGripError": {
-                    "title": "MaxAllowedGripError",
-                    "minimum": 0.0,
-                    "type": "number"
-                }
-            },
-            "required": [
-                "baseOffsetFromMount",
-                "jawCenterOffsetFromBase",
-                "pinOneOffsetFromBase",
-                "pinTwoOffsetFromBase",
-                "jawWidth"
-            ]
-        },
-        "GripForceProfile": {
-            "title": "GripForceProfile",
-            "description": "Gripper force profile.",
-            "type": "object",
-            "properties": {
-                "polynomial": {
-                    "title": "Polynomial",
-                    "description": "Polynomial function to convert a grip force in Newton to the jaw motor duty cycle value, which will be read by the gripper firmware.",
-                    "minItems": 1,
-                    "type": "array",
-                    "items": {
-                        "type": "array",
-                        "items": [
-                            {
-                                "type": "integer",
-                                "minimum": 0
-                            },
-                            {
-                                "type": "number"
-                            }
-                        ]
-                    }
-                },
-                "defaultGripForce": {
-                    "title": "Defaultgripforce",
-                    "minimum": 0.0,
-                    "type": "number"
-                },
-                "defaultIdleForce": {
-                    "title": "Defaultidleforce",
-                    "minimum": 0.0,
-                    "type": "number"
-                },
-                "defaultHomeForce": {
-                    "title": "Defaulthomeforce",
-                    "minimum": 0.0,
-                    "type": "number"
-                },
-                "min": {
-                    "title": "Min",
-                    "minimum": 0.0,
-                    "type": "number"
-                },
-                "max": {
-                    "title": "Max",
-                    "minimum": 0.0,
-                    "type": "number"
-                }
-            },
-            "required": [
-                "polynomial",
-                "defaultGripForce",
-                "defaultIdleForce",
-                "defaultHomeForce",
-                "min",
-                "max"
-            ]
-        }
-    }
-}

package/lib/js/__tests__/deckSchemas.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/getAreSlotsAdjacent.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/getWellNamePerMultiTip.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/labwareDefQuirks.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/labwareDefSchemaV1.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/labwareDefSchemaV2.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/moduleAccessors.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/moduleSpecsSchema.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/pipetteSchemaV2.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/pipetteSpecSchemas.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/pipettes.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/protocolSchemaV4.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/protocolSchemaV5.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/protocolSchemaV6.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/protocolSchemaV7.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/protocolValidation.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/sortWells.test.d.ts

@@ -1 +0,0 @@
-export {};

package/lib/js/__tests__/splitWellsOnColumn.test.d.ts

@@ -1 +0,0 @@
-export {};