@metamesh/modeling 0.14.0 → 0.16.0

package/dist/docs/reference/geometry/CorrespondingComponent.md

@@ -43,4 +43,8 @@ Clockwise hole contours belonging to this component.
 
 - [CorrespondingContour](CorrespondingContour.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CorrespondingContour.md

@@ -43,4 +43,8 @@ One span identity per point; indices correspond between every matched family mem
 
 - [Contour](Contour.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CorrespondingProfile.md

@@ -19,4 +19,8 @@ Ordered components with explicit contour identities.
 
 - [CorrespondingComponent](CorrespondingComponent.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CorrespondingProfileStation.md

@@ -24,4 +24,8 @@ Already corresponding filled contours with authoritative landmark slots.
 - [CorrespondingProfile](CorrespondingProfile.md)
 - [LoftPlacement](LoftPlacement.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CubicBezierCurve2.md

@@ -20,7 +20,7 @@ Selects a cubic Bézier through two endpoints and two controls.
 
 
 
-`readonly` **start**: [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **start**: [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -32,7 +32,7 @@ Initial XY point in millimetres.
 
 
 
-`readonly` **control1**: [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **control1**: [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -44,7 +44,7 @@ First XY control point in millimetres.
 
 
 
-`readonly` **control2**: [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **control2**: [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -56,7 +56,7 @@ Second XY control point in millimetres.
 
 
 
-`readonly` **end**: [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **end**: [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -65,6 +65,10 @@ Final XY point in millimetres.
 
 ## Related APIs
 
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CubicBezierCurve3.md

@@ -20,7 +20,7 @@ Selects a cubic Bézier through two endpoints and two controls.
 
 
 
-`readonly` **start**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **start**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -32,7 +32,7 @@ Initial XYZ point in millimetres.
 
 
 
-`readonly` **control1**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **control1**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -44,7 +44,7 @@ First XYZ control point in millimetres.
 
 
 
-`readonly` **control2**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **control2**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -56,7 +56,7 @@ Second XYZ control point in millimetres.
 
 
 
-`readonly` **end**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **end**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -65,6 +65,10 @@ Final XYZ point in millimetres.
 
 ## Related APIs
 
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Data](Vector3Data.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/Curve2.md

@@ -13,4 +13,8 @@ Reusable planar curve definition.
 - [CubicBezierCurve2](CubicBezierCurve2.md)
 - [LineCurve2](LineCurve2.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/Curve3.md

@@ -13,4 +13,8 @@ Reusable spatial curve definition.
 - [CubicBezierCurve3](CubicBezierCurve3.md)
 - [LineCurve3](LineCurve3.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CurveSamplingOptions.md

@@ -4,6 +4,7 @@ Explicit physical sampling and allocation policy for reusable curves.
 
 ## Extended by
 
+- [`PathResamplingOptions`](PathResamplingOptions.md)
 - [`PolylineResamplingOptions`](PolylineResamplingOptions.md)
 
 ## Properties
@@ -32,11 +33,11 @@ Millimetre sampling policy; circularSegments applies only to arcs.
 
 ***
 
-### maximumVertices?
+### maxVertices?
 
 
 
-`readonly` `optional` **maximumVertices?**: `number`
+`readonly` `optional` **maxVertices?**: `number`
 
 
 
@@ -59,6 +60,11 @@ Explicit sampling ceilings; omitted values use package defaults without ambient
 
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
+- [PathResamplingOptions](PathResamplingOptions.md)
 - [PolylineResamplingOptions](PolylineResamplingOptions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CustomThreadProfileSpec.md

@@ -24,7 +24,7 @@ Selects a caller-defined periodic profile.
 
 
 
-`readonly` **points**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
+`readonly` **points**: readonly [`Vector2Data`](Vector2Data.md)[]
 
 
 
@@ -68,6 +68,10 @@ Optional numerical tolerance overrides.
 
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylinderAnchorFace.md

@@ -10,5 +10,6 @@ Named face on a cylinder parallel to +Z.
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylinderAnchorOptions.md

@@ -40,11 +40,11 @@ Named outward face; side anchors lie halfway up the cylinder.
 
 ***
 
-### angleDegrees?
+### angle?
 
 
 
-`readonly` `optional` **angleDegrees?**: `number`
+`readonly` `optional` **angle?**: `number`
 
 
 
@@ -68,7 +68,7 @@ Centers the cylinder along Z; defaults to true, matching cylinder().
 
 
 
-`readonly` `optional` **origin?**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` `optional` **origin?**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -78,10 +78,11 @@ Construction origin; centered-axis midpoint or noncentered bottom axis. Defaults
 ## Related APIs
 
 - [CylinderAnchorFace](CylinderAnchorFace.md)
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Data](Vector3Data.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylinderOptions.md

@@ -2,7 +2,7 @@
 
 Dimensions, placement, independent end finishing, and tessellation for a Z-axis cylinder or frustum.
 
-**CylinderOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & [`RadialSizingOptions`](RadialSizingOptions.md) & [`PrimitivePlacement`](PrimitivePlacement.md) & `object` & (\{ `radius`: `number` \| readonly \[`bottom`: `number`, `top`: `number`\]; `diameter?`: `never`; \} \| \{ `diameter`: `number` \| readonly \[`bottom`: `number`, `top`: `number`\]; `radius?`: `never`; \})
+**CylinderOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & [`RadialSizingOptions`](RadialSizingOptions.md) & [`PrimitiveAttachment`](PrimitiveAttachment.md) & `object` & (\{ `radius`: `number` \| readonly \[`bottom`: `number`, `top`: `number`\]; `diameter?`: `never`; \} \| \{ `diameter`: `number` \| readonly \[`bottom`: `number`, `top`: `number`\]; `radius?`: `never`; \})
 
 
 
@@ -47,7 +47,7 @@ Total height along +Z in millimetres.
 
 - [CircularPrimitiveOptions](CircularPrimitiveOptions.md)
 - [EndTreatments](EndTreatments.md)
-- [PrimitivePlacement](PrimitivePlacement.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
 - [RadialSizingOptions](RadialSizingOptions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearDimensions.md

@@ -16,11 +16,11 @@ Addendum above the pitch circle, in millimetres.
 
 ***
 
-### angularPitch
+### angularPitchRadians
 
 
 
-`readonly` **angularPitch**: `number`
+`readonly` **angularPitchRadians**: `number`
 
 
 
@@ -206,4 +206,9 @@ Pressure angle measured in the transverse pitch plane, in radians.
 
 Helical equivalent spur tooth count, `toothCount / cos³(helixAngle)`.
 
-Package: `@metamesh/modeling@0.14.0`.
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearMeshKind.md

@@ -4,4 +4,11 @@ Whether two cylindrical gears mesh on their outside teeth or as a pinion inside
 
 **CylindricalGearMeshKind** = `"external"` \| `"internal"`
 
-Package: `@metamesh/modeling@0.14.0`.
+
+
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearOutlineOptions.md

@@ -68,4 +68,8 @@ Exact samples along each tooth tip, at least one, within selected circular/profi
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearPairDimensions.md

@@ -64,11 +64,11 @@ Absolute driven-to-driver tooth-count ratio.
 
 ***
 
-### requiredDrivenHelixAngleDegrees
+### requiredDrivenHelixAngle
 
 
 
-`readonly` **requiredDrivenHelixAngleDegrees**: `number`
+`readonly` **requiredDrivenHelixAngle**: `number`
 
 
 
@@ -79,4 +79,8 @@ Helix angle required on the driven member for conjugate teeth, in degrees.
 
 - [CylindricalGearDimensions](CylindricalGearDimensions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearPairMotionOptions.md

@@ -31,4 +31,8 @@ Coupled poses sampled over one driver tooth pitch. Defaults to 24.
 
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearPairMotionReport.md

@@ -38,4 +38,9 @@ Maximum pinion area lying inside ring material, in square millimetres.
 
 Number of evenly spaced coupled poses inspected.
 
-Package: `@metamesh/modeling@0.14.0`.
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearPairSpec.md

@@ -44,4 +44,8 @@ External/external or external/internal mesh.
 - [CylindricalGearMeshKind](CylindricalGearMeshKind.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/CylindricalGearSpec.md

@@ -2,7 +2,7 @@
 
 Nominal dimensions for a standard full-depth cylindrical involute gear.
 
-Lengths use millimetres. `module` and `pressureAngleDegrees` are measured in
+Lengths use millimetres. `module` and `pressureAngle` are measured in
 the normal plane; a non-zero signed helix angle is converted to transverse
 pitch-plane dimensions. Positive and negative helix angles identify
 opposite hands but produce the same 2D pitch geometry.
@@ -33,11 +33,11 @@ Dedendum clearance as a multiple of normal module; defaults to `0.25`.
 
 ***
 
-### helixAngleDegrees?
+### helixAngle?
 
 
 
-`readonly` `optional` **helixAngleDegrees?**: `number`
+`readonly` `optional` **helixAngle?**: `number`
 
 
 
@@ -57,11 +57,11 @@ Normal module in millimetres per tooth.
 
 ***
 
-### pressureAngleDegrees?
+### pressureAngle?
 
 
 
-`readonly` `optional` **pressureAngleDegrees?**: `number`
+`readonly` `optional` **pressureAngle?**: `number`
 
 
 
@@ -79,4 +79,9 @@ Normal pressure angle in degrees; defaults to 20 degrees.
 
 Integer tooth count from 6 through 1,000; external profiles also enforce the no-undercut limit.
 
-Package: `@metamesh/modeling@0.14.0`.
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/DEFAULT_GEOMETRY_TOLERANCE.md

@@ -4,4 +4,4 @@ Default absolute, relative, and angular tolerances for millimetre-scale models.
 
 `const` **DEFAULT\_GEOMETRY\_TOLERANCE**: `Readonly`\<\{ `absolute`: `1e-9`; `angular`: `1e-10`; `relative`: `1e-12`; \}\>
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/EdgeTreatment.md

@@ -14,4 +14,4 @@ Uniform finishing vocabulary shared by applicable solid edges and profile corner
 - [RoundedEdgeTreatment](RoundedEdgeTreatment.md)
 - [SmoothEdgeTreatment](SmoothEdgeTreatment.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/EllipseContourOptions.md

@@ -2,7 +2,7 @@
 
 Ellipse dimensions with exactly one XY radii or full-size tuple and explicit sampling.
 
-**EllipseContourOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & (\{ `radius`: [`Vector2Tuple`](Vector2Tuple.md); `size?`: `never`; \} \| \{ `size`: [`Vector2Tuple`](Vector2Tuple.md); `radius?`: `never`; \})
+**EllipseContourOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & (\{ `radius`: [`Vector2Data`](Vector2Data.md); `size?`: `never`; \} \| \{ `size`: [`Vector2Data`](Vector2Data.md); `radius?`: `never`; \})
 
 
 
@@ -10,6 +10,10 @@ Ellipse dimensions with exactly one XY radii or full-size tuple and explicit sam
 ## Related APIs
 
 - [CircularPrimitiveOptions](CircularPrimitiveOptions.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/EndTreatments.md

@@ -31,4 +31,4 @@ Top cap and adjoining side; omitted leaves the end untreated.
 
 - [EdgeTreatment](EdgeTreatment.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/ExtrudeOptions.md

@@ -96,7 +96,7 @@ Operation-level physical policy over the nearest model scope.
 
 
 
-`readonly` `optional` **scaleTop?**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` `optional` **scaleTop?**: `number` \| [`Vector2Input`](Vector2Input.md)
 
 
 
@@ -108,11 +108,11 @@ Finite uniform or XY scale of the top profile; defaults to one.
 
 ***
 
-### twistDegrees?
+### twist?
 
 
 
-`readonly` `optional` **twistDegrees?**: `number`
+`readonly` `optional` **twist?**: `number`
 
 
 
@@ -120,7 +120,7 @@ Finite rotation of the top profile about +Z, in degrees; defaults to zero.
 
 #### Inherited from
 
-[`ExtrusionSamplingOptions`](ExtrusionSamplingOptions.md).[`twistDegrees`](ExtrusionSamplingOptions.md#twistdegrees)
+[`ExtrusionSamplingOptions`](ExtrusionSamplingOptions.md).[`twist`](ExtrusionSamplingOptions.md#twist)
 
 
 ## Related APIs
@@ -129,6 +129,10 @@ Finite rotation of the top profile about +Z, in degrees; defaults to zero.
 - [ExtrusionSamplingOptions](ExtrusionSamplingOptions.md)
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Input](Vector2Input.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/ExtrusionSamplingOptions.md

@@ -48,7 +48,7 @@ Operation-level physical policy over the nearest model scope.
 
 
 
-`readonly` `optional` **scaleTop?**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` `optional` **scaleTop?**: `number` \| [`Vector2Input`](Vector2Input.md)
 
 
 
@@ -56,11 +56,11 @@ Finite uniform or XY scale of the top profile; defaults to one.
 
 ***
 
-### twistDegrees?
+### twist?
 
 
 
-`readonly` `optional` **twistDegrees?**: `number`
+`readonly` `optional` **twist?**: `number`
 
 
 
@@ -72,6 +72,10 @@ Finite rotation of the top profile about +Z, in degrees; defaults to zero.
 - [ExtrudeOptions](ExtrudeOptions.md)
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Input](Vector2Input.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/FittedTextLayout.md

@@ -24,7 +24,7 @@ Transformed physical measurements, including nonempty visible ink bounds.
 
 
 
-`readonly` **bounds**: [`Bounds2`](Bounds2.md)
+`readonly` **bounds**: [`Bounds2Data`](Bounds2Data.md)
 
 
 
@@ -53,8 +53,12 @@ Nonzero-filled path data in millimetres, positive Y upward; empty for text with
 
 ## Related APIs
 
-- [Bounds2](Bounds2.md)
+- [Bounds2Data](Bounds2Data.md)
 - [VectorTextLayout](VectorTextLayout.md)
 - [VectorTextMetrics](VectorTextMetrics.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/Frame3.md

@@ -8,7 +8,7 @@ A right-handed orthonormal coordinate frame expressed in world coordinates.
 
 
 
-`readonly` **origin**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **origin**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -20,7 +20,7 @@ World-space origin of the local frame.
 
 
 
-`readonly` **xAxis**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **xAxis**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -32,7 +32,7 @@ Unit vector defining the local +X axis.
 
 
 
-`readonly` **yAxis**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **yAxis**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -44,7 +44,7 @@ Unit vector defining the local +Y axis.
 
 
 
-`readonly` **zAxis**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **zAxis**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -53,6 +53,10 @@ Unit vector defining the local +Z axis.
 
 ## Related APIs
 
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Data](Vector3Data.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/GeometryError.md

@@ -94,4 +94,4 @@ Operation and scalar facts associated with the failure.
 - [GeometryErrorCode](GeometryErrorCode.md)
 - [GeometryErrorContext](GeometryErrorContext.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/GeometryErrorCode.md

@@ -4,4 +4,4 @@ Stable categories for invalid inputs, topology, allocation, and runtime failures
 
 **GeometryErrorCode** = `"COMPLEXITY_LIMIT"` \| `"DEGENERATE_GEOMETRY"` \| `"INVALID_ARGUMENT"` \| `"INVALID_MESH"` \| `"INVALID_TOPOLOGY"` \| `"INVALID_TOLERANCE"` \| `"NON_FINITE_VALUE"` \| `"SELF_INTERSECTION"` \| `"SINGULAR_TRANSFORM"` \| `"UNSUPPORTED_RUNTIME"`
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/GeometryErrorContext.md

@@ -26,4 +26,4 @@ Optional scalar facts useful for diagnostics without parsing the message.
 
 Stable operation name, such as `normalizeContour` or `extrude`.
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.