@metamesh/modeling 0.14.0 → 0.16.0

package/dist/docs/reference/model/Solid.md

@@ -1,6 +1,13 @@
 # Solid
 
-Immutable deferred solid recipe. Construction and composition require no engine. Ordinary recipes may be reused across sessions regardless of where constructed. Explicit resolution settings are captured; unspecified settings inherit the evaluating host's defaults. Observed components and recipes using them can only be evaluated in their originating session. Methods leave the source unchanged and use millimetres and degrees. A no-op may reuse the receiver; final part placement belongs in `part` options.
+Immutable deferred solid recipe.
+
+Construction and composition require no engine.
+Ordinary recipes may be reused across sessions regardless of where constructed.
+Explicit resolution settings are captured; unspecified settings inherit the evaluating host's defaults.
+Observed components and recipes using them can only be evaluated in their originating session.
+Methods leave the source unchanged and use millimetres and degrees.
+A no-op may reuse the receiver; final part placement belongs in `part` options.
 
 ## Example: Shape a body with a through bore
 
@@ -166,6 +173,22 @@ Applies a reusable XYZ placement or canonical row-major matrix.
 
 ***
 
+### toTriangleMesh()
+
+
+
+**toTriangleMesh**(): [`TriangleMesh`](TriangleMesh.md)
+
+
+
+Copies manufacturing mesh buffers for interchange; requires an active model execution.
+
+#### Returns
+
+[`TriangleMesh`](TriangleMesh.md)
+
+***
+
 ### subtract()
 
 
@@ -275,9 +298,9 @@ Places an explicit or named source anchor against an explicit target anchor.
 
 - [`gap`](AttachOptions.md#gap) · `number` · Optional
 
-  Separation along the target anchor's outward direction in millimetres.
+  Separation along the target anchor's outward direction in model units.
 
-- [`spinDegrees`](AttachOptions.md#spindegrees) · `number` · Optional
+- [`spin`](AttachOptions.md#spin) · `number` · Optional
 
   Additional right-handed roll about the attached direction, in degrees.
 
@@ -293,15 +316,15 @@ Places an explicit or named source anchor against an explicit target anchor.
 
 ***
 
-### setTolerance()
+### withTolerance()
 
 
 
-**setTolerance**(`tolerance`: `number`): `Solid`
+**withTolerance**(`tolerance`: `number`): `Solid`
 
 
 
-Replaces native tolerance on an immutable copy; zero selects the kernel minimum.
+Returns an immutable copy with this native tolerance; zero selects the kernel minimum.
 
 #### Parameters
 
@@ -363,6 +386,7 @@ Takes a filled horizontal slice at Z millimetres.
 - [Pivot3Options](Pivot3Options.md)
 - [Section](Section.md)
 - [Transform3Input](Transform3Input.md)
+- [TriangleMesh](TriangleMesh.md)
 - [Vector3Input](Vector3Input.md)
 
 ## Guides
@@ -370,4 +394,4 @@ Takes a filled horizontal slice at Z millimetres.
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SolidInspection.md

@@ -20,7 +20,7 @@ Whether this native solid contains no material.
 
 
 
-`readonly` **max**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **max**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -32,7 +32,7 @@ Inclusive maximum coordinates in millimetres.
 
 
 
-`readonly` **min**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **min**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -40,15 +40,15 @@ Inclusive minimum coordinates in millimetres.
 
 ***
 
-### parts
+### componentCount
 
 
 
-`readonly` **parts**: `number`
+`readonly` **componentCount**: `number`
 
 
 
-Number of connected surface shells; inward cavity shells count separately.
+Number of disconnected material components, each retaining enclosed cavities.
 
 ***
 
@@ -89,10 +89,10 @@ Effective native geometric tolerance in millimetres.
 
 ## Related APIs
 
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Data](Vector3Data.md)
 
 ## Guides
 
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/{SolidRayHit.md → SolidSegmentHit.md}

@@ -1,4 +1,4 @@
-# SolidRayHit
+# SolidSegmentHit
 
 Copied surface intersection from a finite directed segment. Distance is in millimetres.
 
@@ -24,7 +24,7 @@ Copied numeric native face identity.
 
 
 
-Distance from the ray origin in millimetres.
+Distance from the segment origin in millimetres.
 
 ***
 
@@ -32,7 +32,7 @@ Distance from the ray origin in millimetres.
 
 
 
-`readonly` **position**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **position**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -44,7 +44,7 @@ Intersection position in millimetres.
 
 
 
-`readonly` **normal**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **normal**: [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -53,6 +53,6 @@ Outward unit surface normal at the intersection.
 
 ## Related APIs
 
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Data](Vector3Data.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SphereOptions.md

@@ -2,7 +2,7 @@
 
 Exactly one radius or diameter, placement, and tessellation for an origin-centered sphere.
 
-**SphereOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & [`PrimitivePlacement`](PrimitivePlacement.md) & (\{ `radius`: `number`; `diameter?`: `never`; \} \| \{ `diameter`: `number`; `radius?`: `never`; \})
+**SphereOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & [`PrimitiveAttachment`](PrimitiveAttachment.md) & (\{ `radius`: `number`; `diameter?`: `never`; \} \| \{ `diameter`: `number`; `radius?`: `never`; \})
 
 
 
@@ -10,11 +10,11 @@ Exactly one radius or diameter, placement, and tessellation for an origin-center
 ## Related APIs
 
 - [CircularPrimitiveOptions](CircularPrimitiveOptions.md)
-- [PrimitivePlacement](PrimitivePlacement.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
 
 ## Guides
 
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/StarOptions.md

@@ -4,23 +4,23 @@ Alternating outer and inner vertices, centered on the XY origin.
 
 ## Extends
 
-- [`PrimitivePlacement`](PrimitivePlacement.md)
+- [`PrimitiveAttachment`](PrimitiveAttachment.md)
 
 ## Properties
 
-### placement?
+### attachment?
 
 
 
-`readonly` `optional` **placement?**: [`PrimitivePlacementOptions`](PrimitivePlacementOptions.md)
+`readonly` `optional` **attachment?**: [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md)
 
 
 
-Applied after local construction; Section placement must preserve the XY plane.
+Applied after local construction; Section attachment must preserve the XY plane.
 
 #### Inherited from
 
-[`PrimitivePlacement`](PrimitivePlacement.md).[`placement`](PrimitivePlacement.md#placement)
+[`PrimitiveAttachment`](PrimitiveAttachment.md).[`attachment`](PrimitiveAttachment.md#attachment)
 
 ***
 
@@ -72,11 +72,11 @@ Integer outer point count from three through 50000.
 
 ***
 
-### rotationDegrees?
+### rotation?
 
 
 
-`readonly` `optional` **rotationDegrees?**: `number`
+`readonly` `optional` **rotation?**: `number`
 
 
 
@@ -86,8 +86,8 @@ Initial counterclockwise rotation in degrees; defaults to zero.
 ## Related APIs
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-- [PrimitivePlacement](PrimitivePlacement.md)
-- [PrimitivePlacementOptions](PrimitivePlacementOptions.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
+- [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
 
 ## Guides
 
@@ -95,4 +95,4 @@ Initial counterclockwise rotation in degrees; defaults to zero.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/{StrokePathCap.md → StrokeCap.md}

@@ -1,8 +1,8 @@
-# StrokePathCap
+# StrokeCap
 
 End-cap treatment for an open stroked path.
 
-**StrokePathCap** = `"butt"` \| `"round"` \| `"square"`
+**StrokeCap** = `"butt"` \| `"round"` \| `"square"`
 
 
 
@@ -13,4 +13,4 @@ End-cap treatment for an open stroked path.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/{StrokePathJoin.md → StrokeJoin.md}

@@ -1,8 +1,8 @@
-# StrokePathJoin
+# StrokeJoin
 
 Join treatment where adjacent stroked path segments meet.
 
-**StrokePathJoin** = `"bevel"` \| `"miter"` \| `"round"`
+**StrokeJoin** = `"bevel"` \| `"miter"` \| `"round"`
 
 
 
@@ -13,4 +13,4 @@ Join treatment where adjacent stroked path segments meet.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/StrokeOptions.md

@@ -24,7 +24,7 @@ Explicit path, circular and expanded-profile allocation ceilings.
 
 
 
-Treat the path as a closed non-duplicated loop. Default: `false`.
+Raw point closure defaults to false; a Path2 supplies its closure and rejects conflicts.
 
 ***
 
@@ -32,7 +32,7 @@ Treat the path as a closed non-duplicated loop. Default: `false`.
 
 
 
-`readonly` `optional` **cap?**: [`StrokePathCap`](StrokePathCap.md)
+`readonly` `optional` **cap?**: [`StrokeCap`](StrokeCap.md)
 
 
 
@@ -44,7 +44,7 @@ End-cap treatment for an open path. Ignored for closed paths. Default: `butt`.
 
 
 
-`readonly` `optional` **join?**: [`StrokePathJoin`](StrokePathJoin.md)
+`readonly` `optional` **join?**: [`StrokeJoin`](StrokeJoin.md)
 
 
 
@@ -79,8 +79,8 @@ Positive total stroke width in millimetres, centered on the sampled path.
 
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-- [StrokePathCap](StrokePathCap.md)
-- [StrokePathJoin](StrokePathJoin.md)
+- [StrokeCap](StrokeCap.md)
+- [StrokeJoin](StrokeJoin.md)
 
 ## Guides
 
@@ -88,4 +88,4 @@ Positive total stroke width in millimetres, centered on the sampled path.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SvgOrigin.md

@@ -13,4 +13,4 @@ Placement of painted SVG geometry after SVG Y-axis inversion.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SvgPathSectionOptions.md

@@ -75,4 +75,4 @@ Positive uniform factor converting SVG user units to millimetres; defaults to on
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SvgSectionOptions.md

@@ -63,4 +63,4 @@ Place the painted bounds around the origin or preserve document coordinates.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SweepOptions.md

@@ -12,7 +12,7 @@ Controls shared by pure mesh construction and filled modeling sweeps.
 
 
 
-Join the path's last station to its first. Open paths retain watertight end caps.
+Raw point closure defaults to false; a Path3 supplies its closure and rejects conflicts.
 
 ***
 
@@ -52,11 +52,11 @@ Physical sampling of nonzero twist; inserted stations retain authored station co
 
 ***
 
-### twistDegrees?
+### twist?
 
 
 
-`readonly` `optional` **twistDegrees?**: `number`
+`readonly` `optional` **twist?**: `number`
 
 
 
@@ -80,7 +80,7 @@ Twist advances by physical path length (default), or normalized authored station
 
 
 
-`readonly` `optional` **scale?**: `number` \| [`Vector2Tuple`](Vector2Tuple.md) \| readonly [`Vector2Tuple`](Vector2Tuple.md)[]
+`readonly` `optional` **scale?**: `number` \| [`Vector2Input`](Vector2Input.md) \| readonly [`Vector2Input`](Vector2Input.md)[]
 
 
 
@@ -104,7 +104,7 @@ Corresponding point-index advance at a rotationally equivalent closed seam.
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
 - [SweepOrientation](SweepOrientation.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Input](Vector2Input.md)
 
 ## Guides
 
@@ -113,4 +113,4 @@ Corresponding point-index advance at a rotationally equivalent closed seam.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SweepOrientation.md

@@ -2,7 +2,7 @@
 
 Explicit profile-X frame policy; all normals are directed, and selected singular policies reject.
 
-**SweepOrientation** = \{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Tuple`](Vector3Tuple.md); \} \| \{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Tuple`](Vector3Tuple.md); \} \| \{ `kind`: `"guide"`; `normal`: [`PathNormalGuide`](PathNormalGuide.md); \} \| \{ `kind`: `"frenet"`; \}
+**SweepOrientation** = \{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Input`](Vector3Input.md); \} \| \{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Input`](Vector3Input.md); \} \| \{ `kind`: `"guide"`; `normal`: [`PathNormalGuide`](PathNormalGuide.md); \} \| \{ `kind`: `"frenet"`; \}
 
 
 
@@ -10,7 +10,7 @@ Explicit profile-X frame policy; all normals are directed, and selected singular
 
 ### Type Literal
 
-\{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Tuple`](Vector3Tuple.md); \}
+\{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Input`](Vector3Input.md); \}
 
 #### kind
 
@@ -26,7 +26,7 @@ Minimizes frame rotation by parallel transport.
 
 
 
-`readonly` `optional` **initialNormal?**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` `optional` **initialNormal?**: [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -36,7 +36,7 @@ Initial profile +X guide, projected perpendicular to the first tangent.
 
 ### Type Literal
 
-\{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Tuple`](Vector3Tuple.md); \}
+\{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Input`](Vector3Input.md); \}
 
 #### kind
 
@@ -52,7 +52,7 @@ Projects one fixed world-space normal at every path station.
 
 
 
-`readonly` **normal**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` **normal**: [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -104,7 +104,7 @@ Uses sampled curvature normals; zero-curvature stations reject.
 ## Related APIs
 
 - [PathNormalGuide](PathNormalGuide.md)
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
@@ -113,4 +113,4 @@ Uses sampled curvature normals; zero-curvature stations reject.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/TextSectionOptions.md

@@ -38,4 +38,4 @@ Local physical sampling policy; exact interval counts take precedence.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadEndStyle.md

@@ -10,5 +10,6 @@ End shape of a generated helical ridge.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadEndTreatmentOptions.md

@@ -113,5 +113,6 @@ clips the periodic profile at the face, and `tapered` ramps into the minor envel
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadHandedness.md

@@ -10,5 +10,6 @@ Direction in which a conventional helical thread advances around +Z.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadLeadInEnvelope.md

@@ -10,5 +10,6 @@ Radial envelope toward which a blunt lead-in collapses.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadLeadInShape.md

@@ -10,5 +10,6 @@ BOSL2-compatible cross-section scaling curve for a blunt thread lead-in.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadProfile.md

@@ -56,7 +56,7 @@ Adjacent axial thread spacing in millimetres.
 
 
 
-`readonly` **points**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
+`readonly` **points**: readonly [`Vector2Data`](Vector2Data.md)[]
 
 
 
@@ -77,10 +77,11 @@ Axial width of the flat at the minor envelope.
 
 ## Related APIs
 
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadRidgeOptions.md

@@ -14,5 +14,6 @@ Parameters for a helical ridge before solid construction.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadedNutBevel.md

@@ -10,5 +10,6 @@ Nut-edge bevel selection.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadedNutOptions.md

@@ -57,11 +57,11 @@ Explicit output and circular allocation ceilings.
 
 ***
 
-### phaseDegrees?
+### phase?
 
 
 
-`readonly` `optional` **phaseDegrees?**: `number`
+`readonly` `optional` **phase?**: `number`
 
 
 
@@ -69,7 +69,7 @@ Angular offset of the first start in degrees. Default: `0`.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`phaseDegrees`](HelicalThreadRidgeMeshOptions.md#phasedegrees)
+[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`phase`](HelicalThreadRidgeMeshOptions.md#phase)
 
 ***
 
@@ -269,5 +269,6 @@ Across-flats width for hex/square or diameter for round, in millimetres.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadedNutPreflight.md

@@ -1,6 +1,6 @@
 # ThreadedNutPreflight
 
-Allocation-free body, cutter, and end-face facts resolved for a threaded nut.
+Resolved body and end-face dimensions plus conservative allocation estimates for the thread cutter.
 
 ## Properties
 
@@ -72,7 +72,7 @@ Smallest radial wall left between the body and cutter at either requested face.
 
 
 
-Conservative allocation facts for the exact extended internal-thread cutter mesh.
+Conservative allocation estimates for the extended cutter; excludes the body and Boolean result.
 
 ***
 
@@ -94,5 +94,6 @@ Start-aligned circular facet count used by the compensated thread cutter.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadedNutShape.md

@@ -10,5 +10,6 @@ Supported printable nut body shapes.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ThreadedRodOptions.md

@@ -74,11 +74,11 @@ Explicit output and circular allocation ceilings.
 
 ***
 
-### phaseDegrees?
+### phase?
 
 
 
-`readonly` `optional` **phaseDegrees?**: `number`
+`readonly` `optional` **phase?**: `number`
 
 
 
@@ -86,7 +86,7 @@ Angular offset of the first start in degrees. Default: `0`.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`phaseDegrees`](HelicalThreadRidgeMeshOptions.md#phasedegrees)
+[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`phase`](HelicalThreadRidgeMeshOptions.md#phase)
 
 ***
 
@@ -241,5 +241,6 @@ Nominal major diameter before male compensation.
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
+- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.