@metamesh/modeling 0.14.0 → 0.16.0

package/dist/docs/reference/geometry/optimizePlanarPatches.md

@@ -28,44 +28,44 @@ Closed, consistently wound indexed triangle mesh in arbitrary consistent units.
 
 Patch eligibility, numeric tolerance, and deterministic work bounds.
 
-- [`maximumFlipAttempts`](PlanarMeshOptimizationOptions.md#maximumflipattempts) · `number` · Optional
+- [`maxFlipAttempts`](PlanarMeshOptimizationOptions.md#maxflipattempts) · `number` · Optional
 
   Maximum attempted edge evaluations. By default this is twenty times the initial candidate
   edge count, capped at `1000000`.
 
-- [`maximumEdgeRevisits`](PlanarMeshOptimizationOptions.md#maximumedgerevisits) · `number` · Optional
+- [`maxEdgeRevisits`](PlanarMeshOptimizationOptions.md#maxedgerevisits) · `number` · Optional
 
   Maximum times one edge may be reconsidered after neighbouring flips. Defaults to `12`.
 
-- [`maximumPatchTriangleCount`](PlanarMeshOptimizationOptions.md#maximumpatchtrianglecount) · `number` · Optional
+- [`maxPatchTriangles`](PlanarMeshOptimizationOptions.md#maxpatchtriangles) · `number` · Optional
 
   Maximum triangles allowed in one selected patch. Defaults to `50000`.
 
-- [`maximumProcessedTriangleCount`](PlanarMeshOptimizationOptions.md#maximumprocessedtrianglecount) · `number` · Optional
+- [`maxProcessedTriangles`](PlanarMeshOptimizationOptions.md#maxprocessedtriangles) · `number` · Optional
 
   Maximum cumulative triangles across selected patches. Defaults to `200000`.
 
-- [`minimumPatchTriangleCount`](PlanarMeshOptimizationOptions.md#minimumpatchtrianglecount) · `number` · Optional
+- [`minPatchTriangles`](PlanarMeshOptimizationOptions.md#minpatchtriangles) · `number` · Optional
 
   Minimum triangles required before a planar patch is eligible. Defaults to `8`.
 
-- [`triggerMaximumAspectRatio`](PlanarMeshOptimizationOptions.md#triggermaximumaspectratio) · `number` · Optional
+- [`triggerMaxAspectRatio`](PlanarMeshOptimizationOptions.md#triggermaxaspectratio) · `number` · Optional
 
   Select patches whose worst normalized aspect ratio exceeds this value. Defaults to `12`.
 
-- [`triggerMaximumFanRatio`](PlanarMeshOptimizationOptions.md#triggermaximumfanratio) · `number` · Optional
+- [`triggerMaxFanRatio`](PlanarMeshOptimizationOptions.md#triggermaxfanratio) · `number` · Optional
 
   Select patches whose largest per-vertex triangle share exceeds this ratio. Defaults to `0.2`.
 
-- [`triggerMaximumVertexTriangleIncidence`](PlanarMeshOptimizationOptions.md#triggermaximumvertextriangleincidence) · `number` · Optional
+- [`triggerMaxVertexTriangleIncidence`](PlanarMeshOptimizationOptions.md#triggermaxvertextriangleincidence) · `number` · Optional
 
   Select patches whose largest vertex triangle incidence exceeds this value. Defaults to `16`.
 
-- [`triggerMinimumAngleDegrees`](PlanarMeshOptimizationOptions.md#triggerminimumangledegrees) · `number` · Optional
+- [`triggerMinAngleDegrees`](PlanarMeshOptimizationOptions.md#triggerminangledegrees) · `number` · Optional
 
   Select patches whose smallest interior angle is below this many degrees. Defaults to `8`.
 
-- [`maximumTriangleCount`](PlanarMeshOptimizationOptions.md#maximumtrianglecount) · `number` · Optional
+- [`maxTriangles`](PlanarMeshOptimizationOptions.md#maxtriangles) · `number` · Optional
 
   Maximum number of triangles inspected. Defaults to `200000`.
 
@@ -88,4 +88,8 @@ Optimized connectivity and before/after diagnostics, or an unchanged safe fallba
 - [PlanarMeshOptimizationResult](PlanarMeshOptimizationResult.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/path2.md

@@ -0,0 +1,54 @@
+# path2
+
+Snapshots finite XY coordinates as an immutable sampled path, independent of engine initialization.
+
+**path2**(`input`: [`Path2Input`](Path2Input.md), `options?`: [`PathOptions`](PathOptions.md)): [`Path2`](Path2-type.md)
+
+
+
+Open paths may be empty or have one point; closed paths need three vertices and omit a duplicated
+seam. Repeated adjacent vertices are retained. No winding normalization or filling is performed.
+Malformed dimensions or topology throw INVALID_ARGUMENT; nonfinite coordinates or measurement
+overflow throw NON_FINITE_VALUE; exhausted allocation ceilings throw COMPLEXITY_LIMIT GeometryError.
+A path input retains its closure. Limits bound construction only; resampling takes its own limits.
+
+Use `toData()` for a frozen record that restores coordinates, closure, and dimension together.
+
+## Parameters
+
+<a id="input"></a>
+
+**`input`** · [`Path2Input`](Path2Input.md) · Required
+
+
+
+<a id="options"></a>
+
+**`options`** · [`PathOptions`](PathOptions.md) · Optional
+
+- [`closed`](PathOptions.md#closed) · `boolean` · Optional
+
+  Connects the last vertex to the first; closed paths omit the repeated seam. Defaults to false.
+
+- [`limits`](PathOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+
+  Construction point ceiling; defaults to package sampling limits. Later sampling has its own options.
+
+
+
+## Returns
+
+[`Path2`](Path2-type.md)
+
+
+## Related APIs
+
+- [Path2](Path2-type.md)
+- [Path2Input](Path2Input.md)
+- [PathOptions](PathOptions.md)
+
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/path3.md

@@ -0,0 +1,49 @@
+# path3
+
+Snapshots finite XYZ coordinates as an immutable sampled path with the same closure, seam, allocation and error rules as path2. Analytic curves must be sampled explicitly first.
+
+**path3**(`input`: [`Path3Input`](Path3Input.md), `options?`: [`PathOptions`](PathOptions.md)): [`Path3`](Path3-type.md)
+
+
+
+Use `toData()` for a frozen record that restores coordinates, closure, and dimension together.
+
+## Parameters
+
+<a id="input"></a>
+
+**`input`** · [`Path3Input`](Path3Input.md) · Required
+
+
+
+<a id="options"></a>
+
+**`options`** · [`PathOptions`](PathOptions.md) · Optional
+
+- [`closed`](PathOptions.md#closed) · `boolean` · Optional
+
+  Connects the last vertex to the first; closed paths omit the repeated seam. Defaults to false.
+
+- [`limits`](PathOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+
+  Construction point ceiling; defaults to package sampling limits. Later sampling has its own options.
+
+
+
+## Returns
+
+[`Path3`](Path3-type.md)
+
+
+## Related APIs
+
+- [Path3](Path3-type.md)
+- [Path3Input](Path3Input.md)
+- [PathOptions](PathOptions.md)
+- [path2](path2.md)
+
+## Guides
+
+- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/pathPatternTransforms.md

@@ -1,16 +1,20 @@
 # pathPatternTransforms
 
-Equal physical arc-length placements along a sampled XYZ path. Tangent orientation maps +Z onto the local path tangent; fixed orientation only translates. Closed paths omit a repeated seam. Explicit sampling ceilings bound both input points and output placements.
+Equal physical arc-length placements along a sampled XYZ path.
 
-**pathPatternTransforms**(`path`: readonly [`Vector3Tuple`](Vector3Tuple.md)[], `options`: [`PathPatternOptions`](PathPatternOptions.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): readonly [`Transform3Matrix`](Transform3Matrix.md)[]
+**pathPatternTransforms**(`path`: [`Path3Input`](Path3Input.md), `options`: [`PathPatternOptions`](PathPatternOptions.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): readonly [`Transform3Data`](Transform3Data.md)[]
 
 
 
+Tangent orientation maps +Z
+onto the local path tangent; fixed orientation only translates. Closed paths omit a repeated seam.
+Explicit sampling ceilings bound both input points and output placements.
+
 ## Parameters
 
 <a id="path"></a>
 
-**`path`** · readonly [`Vector3Tuple`](Vector3Tuple.md)[] · Required
+**`path`** · [`Path3Input`](Path3Input.md) · Required
 
 
 
@@ -24,11 +28,11 @@ Equal physical arc-length placements along a sampled XYZ path. Tangent orientati
 
 - [`closed`](PathPatternOptions.md#closed) · `boolean` · Optional
 
-  Include the closing edge without duplicating the seam; defaults to false.
+  Raw point closure defaults to false; a path value supplies closure and rejects conflicts.
 
 - [`orientation`](PathPatternOptions.md#orientation) · `"fixed"` \| `"tangent"` · Optional
 
-  Preserve the source orientation, or align its +Z to the path tangent; defaults to fixed.
+  Preserve orientation, or align local +X for Sections / +Z for Solids to the tangent. Defaults to fixed.
 
 
 
@@ -40,18 +44,18 @@ Equal physical arc-length placements along a sampled XYZ path. Tangent orientati
 
 ## Returns
 
-readonly [`Transform3Matrix`](Transform3Matrix.md)[]
+readonly [`Transform3Data`](Transform3Data.md)[]
 
 
 ## Related APIs
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
+- [Path3Input](Path3Input.md)
 - [PathPatternOptions](PathPatternOptions.md)
-- [Transform3Matrix](Transform3Matrix.md)
-- [Vector3Tuple](Vector3Tuple.md)
+- [Transform3Data](Transform3Data.md)
 
 ## Guides
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/preflightHeightfield.md

@@ -1,11 +1,15 @@
 # preflightHeightfield
 
-Checks grid dimensions, coordinate precision, and allocation bounds before evaluating heights.
+Checks grid options, Float32 axis precision, and output limits; returns exact mesh buffer counts.
 
 **preflightHeightfield**(`options`: [`HeightfieldOptions`](HeightfieldOptions.md), `limits?`: `Partial`\<`Pick`\<[`ModelingLimits`](ModelingLimits.md), `"maxVertices"` \| `"maxTriangles"` \| `"maxBytes"`\>\>): [`HeightfieldPreflight`](HeightfieldPreflight.md)
 
 
 
+This pure operation needs no engine and neither evaluates `height` nor allocates mesh buffers.
+Successful preflight leaves height values, Float32 base storage, and generated mesh validity to
+construction. `byteCount` covers position and index buffers, not total working memory.
+
 ## Parameters
 
 <a id="options"></a>
@@ -30,5 +34,10 @@ Checks grid dimensions, coordinate precision, and allocation bounds before evalu
 - [HeightfieldOptions](HeightfieldOptions.md)
 - [HeightfieldPreflight](HeightfieldPreflight.md)
 - [ModelingLimits](ModelingLimits.md)
+- [heightfieldMesh](heightfieldMesh.md)
+
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/preflightHelicalThreadSolidMesh.md

@@ -1,11 +1,15 @@
 # preflightHelicalThreadSolidMesh
 
-Validates a direct thread solid and returns its conservative allocation estimate without constructing vertex or index buffers.
+Checks thread dimensions, profile, end treatments, sampling, and conservative estimates against output limits.
 
 **preflightHelicalThreadSolidMesh**(`options`: [`HelicalThreadSolidMeshOptions`](HelicalThreadSolidMeshOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
 
 
 
+This pure operation needs no engine and constructs planning data without vertex or index buffers.
+`circularSegments` is the selected count; row and triangle counts are conservative estimates.
+Successful preflight leaves generated coordinate and topology checks to mesh construction.
+
 ## Parameters
 
 <a id="options"></a>
@@ -20,7 +24,7 @@ Validates a direct thread solid and returns its conservative allocation estimate
 
   Nominal major diameter before any caller-owned fit compensation.
 
-- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +41,7 @@ Validates a direct thread solid and returns its conservative allocation estimate
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](HelicalThreadSolidMeshOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](HelicalThreadSolidMeshOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -92,5 +96,10 @@ Validates a direct thread solid and returns its conservative allocation estimate
 
 - [HelicalThreadSolidMeshOptions](HelicalThreadSolidMeshOptions.md)
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
+- [helicalThreadSolidMesh](helicalThreadSolidMesh.md)
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/preflightInternalThreadCutter.md

@@ -1,11 +1,16 @@
 # preflightInternalThreadCutter
 
-Preflights the exact extended mesh used by the internal thread cutter constructor.
+Resolves compensated cutter dimensions and checks extended mesh estimates against output limits.
 
 **preflightInternalThreadCutter**(`options`: [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
 
 
 
+This pure operation uses explicit resolution and limits or package defaults, without an active
+host execution. It includes the cutter's one-pitch extension beyond each requested face and
+creates planning data without mesh buffers or native objects. Row and triangle counts are
+estimates; mesh validity and native construction are checked later.
+
 ## Parameters
 
 <a id="options"></a>
@@ -16,7 +21,7 @@ Preflights the exact extended mesh used by the internal thread cutter constructo
 
   Total threaded axial length in millimetres.
 
-- [`profile`](InternalThreadCutterOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](InternalThreadCutterOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +42,7 @@ Preflights the exact extended mesh used by the internal thread cutter constructo
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](InternalThreadCutterOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](InternalThreadCutterOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -81,5 +86,11 @@ Preflights the exact extended mesh used by the internal thread cutter constructo
 
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 - [InternalThreadCutterOptions](InternalThreadCutterOptions.md)
+- [helicalThreadSolidMesh](helicalThreadSolidMesh.md)
+- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/preflightSvgRegion.md

@@ -1,11 +1,16 @@
 # preflightSvgRegion
 
-Preflights bounded SVG geometry without browser or Manifold dependencies.
+Parses and validates bounded SVG input, constructing its normalized sampled region and diagnostics.
 
 **preflightSvgRegion**(`svg`: `string`, `options?`: [`SvgImportOptions`](SvgImportOptions.md)): [`SvgRegionPreflight`](SvgRegionPreflight.md)
 
 
 
+This pure operation performs curve flattening, fill and stroke construction, and polygon union;
+it needs no browser or engine. Geometry counts measure the returned region at the selected
+resolution, rather than predicting later mesh allocation. The region may be empty; tiny-island
+and short-edge indicators do not establish manufacturability or later solid validity.
+
 ## Parameters
 
 <a id="svg"></a>
@@ -48,9 +53,17 @@ Physical flattening and viewport-origin controls.
 The canonical normalized region plus bounded source, topology, and safe-repair facts.
 
 
+## Throws
+
+- GeometryError When XML, supported-feature, geometry, or complexity checks fail.
+
 ## Related APIs
 
 - [SvgImportOptions](SvgImportOptions.md)
 - [SvgRegionPreflight](SvgRegionPreflight.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/preflightThreadedNut.md

@@ -1,18 +1,23 @@
 # preflightThreadedNut
 
-Resolves a nut's exact body/cutter chamfer and preflights its extended thread mesh without allocating Manifold WASM objects.
+Checks nut dimensions, chamfers, end-face wall, and the extended compensated cutter's allocation plan.
 
 **preflightThreadedNut**(`options`: [`ThreadedNutOptions`](ThreadedNutOptions.md)): [`ThreadedNutPreflight`](ThreadedNutPreflight.md)
 
 
 
+This pure operation uses explicit resolution and limits or package defaults, without an active
+host execution. It resolves body/cutter dimensions without mesh buffers or native objects.
+`thread` contains conservative cutter estimates, excluding the body and Boolean result.
+Successful preflight leaves mesh validity, native construction, and manufacturing fit to later checks.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`ThreadedNutOptions`](ThreadedNutOptions.md) · Required
 
-- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -45,7 +50,7 @@ Resolves a nut's exact body/cutter chamfer and preflights its extended thread me
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](ThreadedNutOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](ThreadedNutOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -92,5 +97,10 @@ Resolves a nut's exact body/cutter chamfer and preflights its extended thread me
 
 - [ThreadedNutOptions](ThreadedNutOptions.md)
 - [ThreadedNutPreflight](ThreadedNutPreflight.md)
+- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/preflightThreadedRod.md

@@ -1,11 +1,15 @@
 # preflightThreadedRod
 
-Preflights the exact compensated direct mesh used by the threaded rod constructor.
+Resolves compensated rod dimensions and checks conservative mesh estimates against output limits.
 
 **preflightThreadedRod**(`options`: [`ThreadedRodOptions`](ThreadedRodOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
 
 
 
+This pure operation uses explicit resolution and limits or package defaults, without an active
+host execution. It creates planning data without mesh buffers or native objects; returned row
+and triangle counts are estimates. Mesh validity and native construction are checked later.
+
 ## Parameters
 
 <a id="options"></a>
@@ -16,7 +20,7 @@ Preflights the exact compensated direct mesh used by the threaded rod constructo
 
   Total threaded axial length in millimetres.
 
-- [`profile`](ThreadedRodOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](ThreadedRodOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +41,7 @@ Preflights the exact compensated direct mesh used by the threaded rod constructo
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](ThreadedRodOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](ThreadedRodOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -81,5 +85,11 @@ Preflights the exact compensated direct mesh used by the threaded rod constructo
 
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 - [ThreadedRodOptions](ThreadedRodOptions.md)
+- [helicalThreadSolidMesh](helicalThreadSolidMesh.md)
+- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
+
+## Guides
+
+- [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/projectOntoPlane3.md

@@ -2,7 +2,7 @@
 
 Removes the component parallel to a normalized plane normal.
 
-`const` **projectOntoPlane3**: (`vector`: [`Vector3Tuple`](Vector3Tuple.md), `normal`: [`Vector3Tuple`](Vector3Tuple.md)) => [`Vector3Tuple`](Vector3Tuple.md)
+`const` **projectOntoPlane3**: (`vector`: [`Vector3Data`](Vector3Data.md), `normal`: [`Vector3Data`](Vector3Data.md)) => [`Vector3Data`](Vector3Data.md)
 
 
 
@@ -10,27 +10,28 @@ Removes the component parallel to a normalized plane normal.
 
 <a id="vector"></a>
 
-**`vector`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
+**`vector`** · [`Vector3Data`](Vector3Data.md) · Required
 
 
 
 <a id="normal"></a>
 
-**`normal`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
+**`normal`** · [`Vector3Data`](Vector3Data.md) · Required
 
 
 
 ## Returns
 
-[`Vector3Tuple`](Vector3Tuple.md)
+[`Vector3Data`](Vector3Data.md)
 
 
 ## Related APIs
 
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector3Data](Vector3Data.md)
 
 ## Guides
 
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+- [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/radialPatternTransforms.md

@@ -2,7 +2,7 @@
 
 Rotations about an explicit axis; angles use degrees and the first placement is identity.
 
-**radialPatternTransforms**(`options`: [`RadialPatternOptions`](RadialPatternOptions.md)): readonly [`Transform3Matrix`](Transform3Matrix.md)[]
+**radialPatternTransforms**(`options`: [`RadialPatternOptions`](RadialPatternOptions.md)): readonly [`Transform3Data`](Transform3Data.md)[]
 
 
 
@@ -12,36 +12,20 @@ Rotations about an explicit axis; angles use degrees and the first placement is
 
 **`options`** · [`RadialPatternOptions`](RadialPatternOptions.md) · Required
 
-- [`count`](RadialPatternOptions.md#count) · `number` · Required
-
-  Number of solids to return, including the original.
-
-- [`axis`](RadialPatternOptions.md#axis) · [`Vector3Tuple`](Vector3Tuple.md) · Required
-
-  Axis of the right-handed rotation. Its magnitude is ignored.
-
-- [`angleDegrees`](RadialPatternOptions.md#angledegrees) · `number` · Required
-
-  Signed rotation from one copy to the next, in degrees.
-
-- [`center`](RadialPatternOptions.md#center) · [`Vector3Tuple`](Vector3Tuple.md) · Optional
-
-  Rotation center in world coordinates. Defaults to the origin.
-
 
 
 ## Returns
 
-readonly [`Transform3Matrix`](Transform3Matrix.md)[]
+readonly [`Transform3Data`](Transform3Data.md)[]
 
 
 ## Related APIs
 
 - [RadialPatternOptions](RadialPatternOptions.md)
-- [Transform3Matrix](Transform3Matrix.md)
+- [Transform3Data](Transform3Data.md)
 
 ## Guides
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/rectangleContour.md

@@ -1,6 +1,6 @@
 # rectangleContour
 
-Creates an immutable CCW rectangle loop. Round radius zero is square; tangent saturated endpoints occur once.
+Creates an immutable sampled CCW rectangle boundary. Round radius zero is square; tangent saturated endpoints occur once.
 
 **rectangleContour**(`options`: [`RectangleContourOptions`](RectangleContourOptions.md)): [`Contour`](Contour.md)
 
@@ -12,13 +12,15 @@ Creates an immutable CCW rectangle loop. Round radius zero is square; tangent sa
 rectangleContour({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 ```
 
+Use [rectangle](../model/rectangle.md) for a filled Section.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`RectangleContourOptions`](RectangleContourOptions.md) · Required
 
-- [`size`](RectangleContourOptions.md#size) · `number` \| [`Vector2Tuple`](Vector2Tuple.md) · Required
+- [`size`](RectangleContourOptions.md#size) · `number` \| [`Vector2Data`](Vector2Data.md) · Required
 
   Positive uniform size or explicit XY extents in millimetres.
 
@@ -45,5 +47,10 @@ rectangleContour({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 
 - [Contour](Contour.md)
 - [RectangleContourOptions](RectangleContourOptions.md)
+- [rectangleProfile](rectangleProfile.md)
+
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/rectangleProfile.md

@@ -12,13 +12,15 @@ Creates an identified rectangle whose edge/corner spans survive zero and saturat
 rectangleProfile({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 ```
 
+Use [rectangle](../model/rectangle.md) for a filled Section.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`RectangleProfileOptions`](RectangleProfileOptions.md) · Required
 
-- [`size`](RectangleProfileOptions.md#size) · `number` \| [`Vector2Tuple`](Vector2Tuple.md) · Required
+- [`size`](RectangleProfileOptions.md#size) · `number` \| [`Vector2Data`](Vector2Data.md) · Required
 
   Positive uniform size or explicit XY extents in millimetres.
 
@@ -49,5 +51,11 @@ rectangleProfile({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 
 - [Profile](Profile.md)
 - [RectangleProfileOptions](RectangleProfileOptions.md)
+- [matchProfiles](matchProfiles.md)
+- [rectangleContour](rectangleContour.md)
+
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/geometry/regionArea.md

@@ -31,4 +31,8 @@ Total filled area in square millimetres.
 
 - [RegionData](RegionData.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+## Guides
+
+- [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
+
+Package: `@metamesh/modeling@0.16.0`.