@metamesh/modeling 0.14.0 → 0.16.0

package/dist/docs/reference/model/ProfileComponent2.md

@@ -43,4 +43,4 @@ Clockwise hole contours belonging to this component.
 
 - [ProfileContour2](ProfileContour2.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ProfileContour2.md

@@ -1,6 +1,6 @@
 # ProfileContour2
 
-Ordered, closed spans. Outer winding is CCW and hole winding is CW.
+An identified closed boundary of curve spans, before shared family sampling. Outer winding is CCW and hole winding is CW. matchProfiles retains span identities in sampled contours.
 
 ## Properties
 
@@ -30,5 +30,7 @@ Ordered identified spans; the last endpoint meets the first start.
 ## Related APIs
 
 - [ProfileSpan2](ProfileSpan2.md)
+- [Contour](Contour.md)
+- [CorrespondingContour](CorrespondingContour.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ProfileSpan2.md

@@ -2,7 +2,7 @@
 
 An identified line, circular arc, or cubic Bézier between corresponding landmarks.
 
-**ProfileSpan2** = `object` & (\{ `kind`: `"line"`; `start`: [`Vector2Tuple`](Vector2Tuple.md); `end`: [`Vector2Tuple`](Vector2Tuple.md); \} \| \{ `kind`: `"arc"`; `center`: [`Vector2Tuple`](Vector2Tuple.md); `radius`: `number`; `startDegrees`: `number`; `sweepDegrees`: `number`; \} \| \{ `kind`: `"cubic"`; `start`: [`Vector2Tuple`](Vector2Tuple.md); `control1`: [`Vector2Tuple`](Vector2Tuple.md); `control2`: [`Vector2Tuple`](Vector2Tuple.md); `end`: [`Vector2Tuple`](Vector2Tuple.md); \})
+**ProfileSpan2** = `object` & (\{ `kind`: `"line"`; `start`: [`Vector2Data`](Vector2Data.md); `end`: [`Vector2Data`](Vector2Data.md); \} \| \{ `kind`: `"arc"`; `center`: [`Vector2Data`](Vector2Data.md); `radius`: `number`; `startAngle`: `number`; `sweepAngle`: `number`; \} \| \{ `kind`: `"cubic"`; `start`: [`Vector2Data`](Vector2Data.md); `control1`: [`Vector2Data`](Vector2Data.md); `control2`: [`Vector2Data`](Vector2Data.md); `end`: [`Vector2Data`](Vector2Data.md); \})
 
 
 
@@ -42,6 +42,6 @@ Optional span-local physical sampling over the family's resolution; exact interv
 ## Related APIs
 
 - [GeometryResolution](GeometryResolution.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/ProfiledEdgeTreatment.md

@@ -20,7 +20,7 @@ Selects an explicit corner profile; no analytic curve is inferred from its sampl
 
 
 
-`readonly` **profile**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
+`readonly` **profile**: readonly [`Vector2Data`](Vector2Data.md)[]
 
 
 
@@ -31,11 +31,11 @@ cap inset first, side setback second; planar corners use incoming then outgoing
 
 ## Related APIs
 
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RadialPatternOptions.md

@@ -1,63 +1,59 @@
 # RadialPatternOptions
 
-Options for repeating one solid around an axis through a center point.
+Degree rotations about a fixed world-space pivot; XY patterns use the implicit +Z axis.
 
-## Properties
+**RadialPatternOptions**\<`Dimension` *extends* `2` \| `3` = `3`\> = `object` & `Dimension` *extends* `2` ? `object` : `object`
 
-### count
-
-
-
-`readonly` **count**: `number`
 
 
+## Type Parameters
 
-Number of solids to return, including the original.
+### Dimension
 
-***
+`Dimension` *extends* `2` \| `3` = `3`
 
-### axis
+## Type Declaration
 
+### count
 
 
-`readonly` **axis**: [`Vector3Tuple`](Vector3Tuple.md)
 
+`readonly` **count**: `number`
 
 
-Axis of the right-handed rotation. Its magnitude is ignored.
 
-***
+Number of shapes to return, including the original.
 
-### angleDegrees
+### angle
 
 
 
-`readonly` **angleDegrees**: `number`
+`readonly` **angle**: `number`
 
 
 
 Signed rotation from one copy to the next, in degrees.
 
-***
-
-### center?
+### pivot?
 
 
 
-`readonly` `optional` **center?**: [`Vector3Tuple`](Vector3Tuple.md)
+`readonly` `optional` **pivot?**: `Dimension` *extends* `2` ? [`Vector2Input`](Vector2Input.md) : [`Vector3Input`](Vector3Input.md)
 
 
 
-Rotation center in world coordinates. Defaults to the origin.
+Fixed world-space rotation pivot; defaults to the coordinate origin.
 
 
 ## Related APIs
 
-- [Vector3Tuple](Vector3Tuple.md)
+- [Vector2Input](Vector2Input.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
 - [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
+- [Fluent values and standalone algorithms](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RadialSizing.md

@@ -12,4 +12,4 @@ Radial dimensions refer to polygon vertices or compensate faceting to meet polyg
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RadialSizingOptions.md

@@ -37,4 +37,4 @@ Vertex sizing is inscribed; face sizing circumscribes the nominal radius. Defaul
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RectangleContourOptions.md

@@ -12,7 +12,7 @@ Shared rectangle dimensions, origin and uniform or per-corner treatment.
 
 
 
-`readonly` **size**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **size**: `number` \| [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -61,7 +61,7 @@ Explicit sampling ceiling for the complete output profile.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [RectangleCornerTreatments](RectangleCornerTreatments.md)
 - [RectangleOptions](RectangleOptions.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
@@ -69,4 +69,4 @@ Explicit sampling ceiling for the complete output profile.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RectangleCornerTreatment.md

@@ -37,4 +37,4 @@ Leaves this corner untreated.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RectangleCornerTreatments.md

@@ -17,4 +17,4 @@ Corner treatments ordered top-right, top-left, bottom-left, bottom-right.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RectangleOptions.md

@@ -5,23 +5,23 @@ Rectangle dimensions, placement and uniform or per-corner treatment.
 ## Extends
 
 - [`RectangleContourOptions`](RectangleContourOptions.md)
-- [`PrimitivePlacement`](PrimitivePlacement.md)
+- [`PrimitiveAttachment`](PrimitiveAttachment.md)
 
 ## Properties
 
-### placement?
+### attachment?
 
 
 
-`readonly` `optional` **placement?**: [`PrimitivePlacementOptions`](PrimitivePlacementOptions.md)
+`readonly` `optional` **attachment?**: [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md)
 
 
 
-Applied after local construction; Section placement must preserve the XY plane.
+Applied after local construction; Section attachment must preserve the XY plane.
 
 #### Inherited from
 
-[`PrimitivePlacement`](PrimitivePlacement.md).[`placement`](PrimitivePlacement.md#placement)
+[`PrimitiveAttachment`](PrimitiveAttachment.md).[`attachment`](PrimitiveAttachment.md#attachment)
 
 ***
 
@@ -29,7 +29,7 @@ Applied after local construction; Section placement must preserve the XY plane.
 
 
 
-`readonly` **size**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **size**: `number` \| [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -92,11 +92,11 @@ Explicit sampling ceiling for the complete output profile.
 
 - [EdgeTreatment](EdgeTreatment.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-- [PrimitivePlacement](PrimitivePlacement.md)
-- [PrimitivePlacementOptions](PrimitivePlacementOptions.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
+- [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
 - [RectangleContourOptions](RectangleContourOptions.md)
 - [RectangleCornerTreatments](RectangleCornerTreatments.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
@@ -104,4 +104,4 @@ Explicit sampling ceiling for the complete output profile.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RegionData.md

@@ -1,6 +1,6 @@
 # RegionData
 
-A two-dimensional region represented by disjoint filled polygons.
+A two-dimensional region represented by disjoint filled polygons. Each PolygonData owns one exterior and its holes; an empty region contains no material.
 
 **RegionData** = readonly [`PolygonData`](PolygonData.md)[]
 
@@ -16,4 +16,4 @@ A two-dimensional region represented by disjoint filled polygons.
 - [Geometry vocabulary](../../guides/concepts.md#geometry-vocabulary)
 - [Lifecycle and inspection](../../guides/concepts.md#lifecycle-and-inspection)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RegularPolygonOptions.md

@@ -2,7 +2,7 @@
 
 Regular polygon dimensions, radial convention and degree rotation.
 
-**RegularPolygonOptions** = [`RadialSizingOptions`](RadialSizingOptions.md) & [`PrimitivePlacement`](PrimitivePlacement.md) & `object`
+**RegularPolygonOptions** = [`RadialSizingOptions`](RadialSizingOptions.md) & [`PrimitiveAttachment`](PrimitiveAttachment.md) & `object`
 
 
 
@@ -28,11 +28,11 @@ Positive nominal radius in millimetres, interpreted according to sizing.
 
 Exact integer side count from three through 100000.
 
-### rotationDegrees?
+### rotation?
 
 
 
-`readonly` `optional` **rotationDegrees?**: `number`
+`readonly` `optional` **rotation?**: `number`
 
 
 
@@ -41,7 +41,7 @@ Counterclockwise rotation in degrees; defaults to zero with a vertex on +X.
 
 ## Related APIs
 
-- [PrimitivePlacement](PrimitivePlacement.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
 - [RadialSizingOptions](RadialSizingOptions.md)
 
 ## Guides
@@ -50,4 +50,4 @@ Counterclockwise rotation in degrees; defaults to zero with a vertex on +X.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RevolveOptions.md

@@ -43,19 +43,24 @@ Operation-level physical tessellation policy over the active model-wide policy.
 
 ***
 
-### revolveDegrees?
+### degrees?
 
 
 
-`readonly` `optional` **revolveDegrees?**: `number`
+`readonly` `optional` **degrees?**: `number`
 
 
 
-Positive angular sweep no greater than 360 degrees; partial revolutions have end caps.
+Positive sweep in degrees, no greater than 360. Defaults to a full revolution;
+smaller sweeps form partial revolutions with end caps.
 Segment counts describe a complete circle and scale to this angular span. Native filled
 revolutions require at least three sweep intervals: adaptive sampling refines to that floor,
 while exact counts that imply fewer intervals reject. Pure revolveMesh supports one interval.
 
+#### Default Value
+
+`360`
+
 ***
 
 ### limits?
@@ -86,4 +91,4 @@ Explicit output and sampling allocation ceilings.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/RoundedEdgeTreatment.md

@@ -93,4 +93,4 @@ Nonnegative millimetre radius; zero leaves the edge or corner untreated. Positiv
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/Section.md

@@ -1,6 +1,13 @@
 # Section
 
-Immutable deferred filled XY section recipe. Construction and composition require no engine. Ordinary recipes may be reused across sessions regardless of where constructed. Observed components and recipes using them can only be evaluated in their originating session. Methods leave the source unchanged; observations require a synchronous model execution. Distances use millimetres; rotations use counterclockwise degrees. Explicit resolution settings are captured; unspecified settings inherit the evaluating host's defaults.
+Immutable deferred filled XY section recipe.
+
+Construction and composition require no engine.
+Ordinary recipes may be reused across sessions regardless of where constructed.
+Observed components and recipes using them can only be evaluated in their originating session.
+Methods leave the source unchanged; observations require a synchronous model execution.
+Distances use millimetres; rotations use counterclockwise degrees.
+Explicit resolution settings are captured; unspecified settings inherit the evaluating host's defaults.
 
 ## Example: Extrude an outline with a border
 
@@ -344,11 +351,11 @@ Extrudes along +Z with degree twist and top scaling.
 
   Operation-level physical policy over the nearest model scope.
 
-- [`scaleTop`](ExtrudeOptions.md#scaletop) · `number` \| [`Vector2Tuple`](Vector2Tuple.md) · Optional
+- [`scaleTop`](ExtrudeOptions.md#scaletop) · `number` \| [`Vector2Input`](Vector2Input.md) · Optional
 
   Finite uniform or XY scale of the top profile; defaults to one.
 
-- [`twistDegrees`](ExtrudeOptions.md#twistdegrees) · `number` · Optional
+- [`twist`](ExtrudeOptions.md#twist) · `number` · Optional
 
   Finite rotation of the top profile about +Z, in degrees; defaults to zero.
 
@@ -387,9 +394,10 @@ Revolves a filled radial/Z shape around +Z, with caps for partial sweeps.
 
   Operation-level physical tessellation policy over the active model-wide policy.
 
-- [`revolveDegrees`](RevolveOptions.md#revolvedegrees) · `number` · Optional
+- [`degrees`](RevolveOptions.md#degrees) · `number` · Optional · Default: `360`
 
-  Positive angular sweep no greater than 360 degrees; partial revolutions have end caps.
+  Positive sweep in degrees, no greater than 360. Defaults to a full revolution;
+  smaller sweeps form partial revolutions with end caps.
   Segment counts describe a complete circle and scale to this angular span. Native filled
   revolutions require at least three sweep intervals: adaptive sampling refines to that floor,
   while exact counts that imply fewer intervals reject. Pure revolveMesh supports one interval.
@@ -410,7 +418,7 @@ Revolves a filled radial/Z shape around +Z, with caps for partial sweeps.
 
 
 
-**sweep**(`path`: readonly [`Vector3Tuple`](Vector3Tuple.md)[], `options?`: [`SweepOptions`](SweepOptions.md)): [`Solid`](Solid.md)
+**sweep**(`path`: [`Path3Input`](Path3Input.md), `options?`: [`SweepOptions`](SweepOptions.md)): [`Solid`](Solid.md)
 
 
 
@@ -420,7 +428,7 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
 <a id="path"></a>
 
-**`path`** · readonly [`Vector3Tuple`](Vector3Tuple.md)[] · Required
+**`path`** · [`Path3Input`](Path3Input.md) · Required
 
 
 
@@ -430,7 +438,7 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
 - [`closed`](SweepOptions.md#closed) · `boolean` · Optional
 
-  Join the path's last station to its first. Open paths retain watertight end caps.
+  Raw point closure defaults to false; a Path3 supplies its closure and rejects conflicts.
 
 - [`limits`](SweepOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
 
@@ -444,7 +452,7 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
   Physical sampling of nonzero twist; inserted stations retain authored station controls.
 
-- [`twistDegrees`](SweepOptions.md#twistdegrees) · `number` · Optional
+- [`twist`](SweepOptions.md#twist) · `number` · Optional
 
   Total additional profile rotation in degrees, with progression selected by twistBy.
 
@@ -452,7 +460,7 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
   Twist advances by physical path length (default), or normalized authored station position, including a closed seam gap.
 
-- [`scale`](SweepOptions.md#scale) · `number` \| [`Vector2Tuple`](Vector2Tuple.md) \| readonly [`Vector2Tuple`](Vector2Tuple.md)[] · Optional
+- [`scale`](SweepOptions.md#scale) · `number` \| [`Vector2Input`](Vector2Input.md) \| readonly [`Vector2Input`](Vector2Input.md)[] · Optional
 
   Positive uniform/XY scale, or one XY pair per path station. Defaults to one.
 
@@ -471,6 +479,7 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
 - [Anchor3](Anchor3.md)
 - [ExtrudeOptions](ExtrudeOptions.md)
+- [Path3Input](Path3Input.md)
 - [Pivot2Options](Pivot2Options.md)
 - [RegionData](RegionData.md)
 - [RevolveOptions](RevolveOptions.md)
@@ -479,7 +488,6 @@ Sweeps this filled section using the selected frame policy and degree twist.
 - [SweepOptions](SweepOptions.md)
 - [Transform2Input](Transform2Input.md)
 - [Vector2Input](Vector2Input.md)
-- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
@@ -487,4 +495,4 @@ Sweeps this filled section using the selected frame policy and degree twist.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SectionHullOptions.md

@@ -2,7 +2,7 @@
 
 Planar convex hull inputs are finite XY points or filled section recipes.
 
-**SectionHullOptions** = \{ `points`: readonly [`Vector2Tuple`](Vector2Tuple.md)[]; `sections?`: `never`; \} \| \{ `sections`: readonly [`Section`](Section.md)[]; `points?`: `never`; \}
+**SectionHullOptions** = \{ `points`: readonly [`Vector2Input`](Vector2Input.md)[]; `sections?`: `never`; \} \| \{ `sections`: readonly [`Section`](Section.md)[]; `points?`: `never`; \}
 
 
 
@@ -10,13 +10,13 @@ Planar convex hull inputs are finite XY points or filled section recipes.
 
 ### Type Literal
 
-\{ `points`: readonly [`Vector2Tuple`](Vector2Tuple.md)[]; `sections?`: `never`; \}
+\{ `points`: readonly [`Vector2Input`](Vector2Input.md)[]; `sections?`: `never`; \}
 
 #### points
 
 
 
-`readonly` **points**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
+`readonly` **points**: readonly [`Vector2Input`](Vector2Input.md)[]
 
 
 
@@ -62,11 +62,11 @@ Section input excludes point input.
 ## Related APIs
 
 - [Section](Section.md)
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Input](Vector2Input.md)
 
 ## Guides
 
 - [Choose the Boolean by the material you want](../../guides/fundamentals.md#choose-the-boolean-by-the-material-you-want)
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SectionInspection.md

@@ -28,11 +28,11 @@ Filled section area in square millimetres.
 
 ***
 
-### contours
+### contourCount
 
 
 
-`readonly` **contours**: `number`
+`readonly` **contourCount**: `number`
 
 
 
@@ -44,7 +44,7 @@ Number of extracted outer and hole contours.
 
 
 
-`readonly` **max**: [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **max**: [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -56,7 +56,7 @@ Inclusive maximum coordinates in millimetres.
 
 
 
-`readonly` **min**: [`Vector2Tuple`](Vector2Tuple.md)
+`readonly` **min**: [`Vector2Data`](Vector2Data.md)
 
 
 
@@ -64,11 +64,11 @@ Inclusive minimum coordinates in millimetres.
 
 ***
 
-### parts
+### componentCount
 
 
 
-`readonly` **parts**: `number`
+`readonly` **componentCount**: `number`
 
 
 
@@ -76,11 +76,11 @@ Number of disconnected filled section components.
 
 ***
 
-### vertices
+### vertexCount
 
 
 
-`readonly` **vertices**: `number`
+`readonly` **vertexCount**: `number`
 
 
 
@@ -89,10 +89,10 @@ Number of native section vertices.
 
 ## Related APIs
 
-- [Vector2Tuple](Vector2Tuple.md)
+- [Vector2Data](Vector2Data.md)
 
 ## Guides
 
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SectionOffsetJoin.md

@@ -13,4 +13,4 @@ Clipper2 join styles accepted by robust region offsets.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SectionOffsetOptions.md

@@ -62,4 +62,4 @@ Operation-level physical tessellation policy over the active model-wide policy.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.

package/dist/docs/reference/model/SmoothEdgeTreatment.md

@@ -73,4 +73,4 @@ Explicit sampling ceilings, bounded by the host policy.
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.14.0`.
+Package: `@metamesh/modeling@0.16.0`.