@metamesh/modeling 0.13.0 → 0.15.0

package/dist/docs/reference/model/transform2.md

@@ -0,0 +1,39 @@
+# transform2
+
+Creates an immutable XY transform, identity by default. Matrices are copied and validated. Pass it directly to Section.transform() and planar data helpers; to3D() explicitly crosses into XYZ. Zero scales and singular matrices throw GeometryError; negative scales reflect.
+
+**transform2**(`matrix?`: [`Transform2Matrix`](Transform2Matrix.md)): [`Transform2`](Transform2-type.md)
+
+
+
+## Example
+
+```ts
+const placement = transform2().rotate(90).translate([10, 0]);
+placement.applyPoint([1, 0]).toArray(); // approximately [10, 1]
+```
+
+## Parameters
+
+<a id="matrix"></a>
+
+**`matrix`** · [`Transform2Matrix`](Transform2Matrix.md) · Optional
+
+
+
+## Returns
+
+[`Transform2`](Transform2-type.md)
+
+
+## Related APIs
+
+- [Transform2](Transform2-type.md)
+- [Transform2Matrix](Transform2Matrix.md)
+
+## Guides
+
+- [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
+- [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/transform3.md

@@ -0,0 +1,39 @@
+# transform3
+
+Creates an immutable XYZ transform, identity by default. Matrices are copied and validated. Calls apply in written order; rotations use degrees and pivots use current world coordinates. Zero scales, singular matrices, nonfinite inputs and zero rotation axes throw GeometryError. Use frameTransform3(frame) as the input for existing orthonormal frame placement.
+
+**transform3**(`matrix?`: [`Transform3Matrix`](Transform3Matrix.md)): [`Transform3`](Transform3-type.md)
+
+
+
+## Example
+
+```ts
+const placement = transform3().rotate([0, 0, 90]).translate([10, 0, 0]);
+placement.applyPoint([1, 0, 0]).toArray(); // approximately [10, 1, 0]
+```
+
+## Parameters
+
+<a id="matrix"></a>
+
+**`matrix`** · [`Transform3Matrix`](Transform3Matrix.md) · Optional
+
+
+
+## Returns
+
+[`Transform3`](Transform3-type.md)
+
+
+## Related APIs
+
+- [Transform3](Transform3-type.md)
+- [Transform3Matrix](Transform3Matrix.md)
+
+## Guides
+
+- [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
+- [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/tube.md

@@ -49,9 +49,9 @@ tube({ height: 20, outerRadius: 10, innerRadius: 6 });
 
   Operation-level physical tessellation policy over the active model-wide policy.
 
-- [`placement`](TubeOptions.md#placement) · [`PrimitivePlacementOptions`](PrimitivePlacementOptions.md) · Optional
+- [`attachment`](TubeOptions.md#attachment) · [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md) · Optional
 
-  Applied after local construction; Section placement must preserve the XY plane.
+  Applied after local construction; Section attachment must preserve the XY plane.
 
 - [`center`](TubeOptions.md#center) · `boolean` · Optional · Default: `true`
 
@@ -74,4 +74,4 @@ tube({ height: 20, outerRadius: 10, innerRadius: 6 });
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/union.md

@@ -69,4 +69,4 @@ Native filled section union; dimensions cannot be mixed.
 - [Choose the Boolean by the material you want](../../guides/fundamentals.md#choose-the-boolean-by-the-material-you-want)
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/vector2.md

@@ -0,0 +1,32 @@
+# vector2
+
+Creates immutable XY arithmetic from a finite tuple or vector, snapshotting the coordinates. Values and results are finite. Invalid dimensions throw `INVALID_ARGUMENT`; nonfinite coordinates and overflow throw `NON_FINITE_VALUE` GeometryError. Use transform2().applyDirection(value) for rotations and nonuniform scaling.
+
+**vector2**(`input`: [`Vector2Input`](Vector2Input.md)): [`Vector2`](Vector2-type.md)
+
+
+
+## Parameters
+
+<a id="input"></a>
+
+**`input`** · [`Vector2Input`](Vector2Input.md) · Required
+
+
+
+## Returns
+
+[`Vector2`](Vector2-type.md)
+
+
+## Related APIs
+
+- [Vector2](Vector2-type.md)
+- [Vector2Input](Vector2Input.md)
+
+## Guides
+
+- [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
+- [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/vector3.md

@@ -0,0 +1,39 @@
+# vector3
+
+Creates immutable XYZ arithmetic from a finite tuple or vector, snapshotting the coordinates. Values and results are finite. Invalid dimensions throw `INVALID_ARGUMENT`; nonfinite coordinates and overflow throw `NON_FINITE_VALUE` GeometryError. Use transform3().applyDirection(value) for rotations and nonuniform scaling.
+
+**vector3**(`input`: [`Vector3Input`](Vector3Input.md)): [`Vector3`](Vector3-type.md)
+
+
+
+## Example
+
+```ts
+const direction = vector3([1, 2, 3]).add([4, 0, 0]).normalize().scale(10);
+const alignment = direction.dot([0, 0, 1]);
+```
+
+## Parameters
+
+<a id="input"></a>
+
+**`input`** · [`Vector3Input`](Vector3Input.md) · Required
+
+
+
+## Returns
+
+[`Vector3`](Vector3-type.md)
+
+
+## Related APIs
+
+- [Vector3](Vector3-type.md)
+- [Vector3Input](Vector3Input.md)
+
+## Guides
+
+- [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
+- [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model.md

@@ -1,8 +1,8 @@
 # Model API
 
-Immutable solids and sections with fluent shape operations, collection functions, and host-owned execution.
+Immutable shapes, vectors and transforms with fluent operations and host-owned geometry evaluation.
 
-Import `generate` and shape constructors and collection functions from `@metamesh/modeling`. Chain shape methods to transform, subtract, and finish immutable recipes; a host session owns execution and optional computed caches.
+Import `generate`, shape constructors, vectors, transforms and collection functions from `@metamesh/modeling`. Chain shape methods to transform, subtract, and finish immutable recipes; a host session owns execution and optional computed caches.
 
 ```ts
 import { box, cylinder, generate } from "@metamesh/modeling";
@@ -15,7 +15,7 @@ snapshot.dispose();
 session.dispose();
 ```
 
-Computed data and recipes reuse unchanged work. Part placement and color are separate from local geometry. Native Sections preserve holes through Boolean and offset chains. Opaque recipes belong to a session. Temporary native allocations belong to the current transaction; sessions may retain bounded evaluated geometry privately. Copied snapshots remain valid after session disposal until they are disposed.
+Computed data and recipes reuse unchanged work. Part placement and color are separate from local geometry. Section recipes preserve holes through Boolean and offset chains. Construction and composition work without an engine. Ordinary recipes may be reused across sessions regardless of where constructed. Explicit resolution settings are captured; unspecified settings inherit the evaluating host defaults. Observed component selections remain restricted to their originating session. Observations require synchronous host execution. Temporary native allocations belong to the current transaction; sessions may retain bounded evaluated geometry privately. Copied snapshots remain valid after session disposal until they are disposed.
 
 See [host lifecycle](engine.md) and [pure foundations](geometry.md).
 
@@ -23,17 +23,18 @@ See [host lifecycle](engine.md) and [pure foundations](geometry.md).
 
 - [Primitives](model/categories/primitives.md) — Create foundational solid geometry and configure its dimensions and tessellation.
 - [Local resolution](model/categories/resolution.md) — Choose physical curve sampling and explicit native tolerance.
-- [2D Sections](model/categories/sections.md) — Create native filled XY sections, including prepared text and bounded painted SVG.
+- [2D Sections](model/categories/sections.md) — Create immutable filled XY shapes, including prepared text and bounded painted SVG.
+- [Sampled paths](model/categories/paths.md) — Reusable immutable planar and spatial trajectories.
 - [Boolean Operations](model/categories/boolean-operations.md) — Combine, intersect and subtract same-dimensional shapes; construct solid envelopes and sums.
-- [Transforms & Placement](model/categories/transforms-placement.md) — Transform 2D sections and 3D solids; arrange and attach solids with explicit placement contracts.
+- [Transforms, Vectors & Placement](model/categories/transforms-placement.md) — Calculate with immutable vectors, reuse transforms, and arrange geometry with explicit placement contracts.
 - [Extrude, Revolve & Sweep](model/categories/extrude-revolve-sweep.md) — Turn sections and paths into extruded, lofted, revolved, or swept solids.
-- [Printable threads](model/categories/threads.md) — Construct compensated thread forms and inspect allocation-free preflight facts.
+- [Printable threads](model/categories/threads.md) — Construct compensated thread forms and inspect bounded preflight facts.
 - [Mesh & Inspection](model/categories/mesh-inspection.md) — Convert validated meshes and inspect stable section or solid measurements.
 - [Core Values & Errors](model/categories/core-values-errors.md) — Use the small shared vocabulary for authored geometry, coordinates, paths, and stable failures.
 - [Explicit matching profiles](model/categories/explicit-profiles.md) — Build hollow or multicomponent lofts and sweeps using stable landmarks.
 - [Sampled surfaces](model/categories/bounded-surfaces.md) — Construct bounded heightfields and positive-inside implicit fields.
-- [Solid inspection](model/categories/inspection.md) — Inspect and convert session-owned recipes while retaining host ownership.
+- [Solid inspection](model/categories/inspection.md) — Evaluate recipes and copy observations while the host owns native resources.
 - [Model generation](model/categories/generation.md) — Declare typed programs, optional computations, semantic parts and structured diagnostics.
 - [Model contracts](model/categories/contracts.md) — Describe opaque handles, dimensions, manufacturing parts, and completed snapshots.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/Bounds2.md

@@ -8,7 +8,7 @@ Axis-aligned bounds in two-dimensional model space.
 
 
 
-`readonly` **max**: [`Vector2`](Vector2.md)
+`readonly` **max**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -20,7 +20,7 @@ Inclusive maximum X/Y coordinates.
 
 
 
-`readonly` **min**: [`Vector2`](Vector2.md)
+`readonly` **min**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -29,6 +29,6 @@ Inclusive minimum X/Y coordinates.
 
 ## Related APIs
 
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/MAX_VECTOR_FONT_BYTES.md

@@ -4,4 +4,4 @@ Limits apply before parsing or shaping untrusted font data.
 
 `const` **MAX\_VECTOR\_FONT\_BYTES**: `number`
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/Vector2Tuple.md

@@ -0,0 +1,7 @@
+# Vector2Tuple
+
+A two-dimensional Cartesian vector or point.
+
+**Vector2Tuple** = readonly \[`x`: `number`, `y`: `number`\]
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/VectorFont.md

@@ -1,6 +1,6 @@
 # VectorFont
 
-A prepared font owns its parsed bytes; keep handles local to their Worker or invocation.
+A prepared font owns its parsed bytes; keep handles local to their Worker or invocation. Invalid arguments and bounded-work failures use GeometryError; unexpected dependency errors propagate.
 
 ## Properties
 
@@ -183,4 +183,4 @@ Serialize visible horizontal or circular outlines as bounded path-only SVG in ph
 - [VectorTextLayoutOptions](VectorTextLayoutOptions.md)
 - [VectorTextMetrics](VectorTextMetrics.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/VectorFontOptions.md

@@ -14,4 +14,4 @@ Identifies the actual weight of a static face, without synthesizing a different
 
 Actual weight of a static face, 1–1000; defaults to 400.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/VectorTextArcBaseline.md

@@ -28,11 +28,11 @@ Baseline radius in millimetres, greater than zero and at most 10000.
 
 ***
 
-### centerAngleDegrees?
+### centerAngle?
 
 
 
-`readonly` `optional` **centerAngleDegrees?**: `number`
+`readonly` `optional` **centerAngle?**: `number`
 
 
 
@@ -50,4 +50,4 @@ Alignment datum in degrees counterclockwise from +X; defaults to 90.
 
 Reading direction around the circle; defaults to clockwise.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/VectorTextLayout.md

@@ -31,4 +31,4 @@ Exact measurements of these paths and their logical text layout.
 
 - [VectorTextMetrics](VectorTextMetrics.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/VectorTextLayoutOptions.md

@@ -108,4 +108,4 @@ Tracking between glyph clusters in millimetres, -100–100; defaults to zero.
 - [VectorTextArcBaseline](VectorTextArcBaseline.md)
 - [VectorTextOptions](VectorTextOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/VectorTextMetrics.md

@@ -91,4 +91,4 @@ Number of lines, including empty and trailing lines; empty text occupies one lin
 
 - [Bounds2](Bounds2.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/VectorTextOptions.md

@@ -47,4 +47,4 @@ Tracking between glyph clusters in millimetres, -100–100; defaults to zero.
 
 - [VectorTextLayoutOptions](VectorTextLayoutOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/categories/font-preparation.md

@@ -8,13 +8,13 @@ Prepare fonts before modeling. TTF, OTF, and WOFF are parsed directly; WOFF2 dec
 
 | API | Summary |
 | --- | --- |
-| [prepareVectorFont](../prepareVectorFont.md) | Parses bounded font bytes using optional fontkit and WOFF2 peers; no font fetching occurs here. |
+| [prepareVectorFont](../prepareVectorFont.md) | Parses bounded font bytes using optional fontkit and WOFF2 peers; no font fetching occurs here. Argument and resource failures use GeometryError; parser and decoder exceptions propagate unchanged. |
 
 ## Interfaces
 
 | API | Summary |
 | --- | --- |
-| [VectorFont](../VectorFont.md) | A prepared font owns its parsed bytes; keep handles local to their Worker or invocation. |
+| [VectorFont](../VectorFont.md) | A prepared font owns its parsed bytes; keep handles local to their Worker or invocation. Invalid arguments and bounded-work failures use GeometryError; unexpected dependency errors propagate. |
 | [VectorFontOptions](../VectorFontOptions.md) | Identifies the actual weight of a static face, without synthesizing a different weight. |
 | [VectorTextArcBaseline](../VectorTextArcBaseline.md) | A circular baseline centered at the XY origin, with rigid shaped glyph groups. |
 | [VectorTextLayout](../VectorTextLayout.md) | Immutable vector layout with no browser, font parser, or kernel ownership. |
@@ -27,7 +27,7 @@ Prepare fonts before modeling. TTF, OTF, and WOFF are parsed directly; WOFF2 dec
 
 | API | Summary |
 | --- | --- |
-| [Vector2](../Vector2.md) | A two-dimensional Cartesian vector or point. |
+| [Vector2Tuple](../Vector2Tuple.md) | A two-dimensional Cartesian vector or point. |
 
 ## Values
 
@@ -35,4 +35,4 @@ Prepare fonts before modeling. TTF, OTF, and WOFF are parsed directly; WOFF2 dec
 | --- | --- |
 | [MAX_VECTOR_FONT_BYTES](../MAX_VECTOR_FONT_BYTES.md) | Limits apply before parsing or shaping untrusted font data. |
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text/prepareVectorFont.md

@@ -1,6 +1,6 @@
 # prepareVectorFont
 
-Parses bounded font bytes using optional fontkit and WOFF2 peers; no font fetching occurs here.
+Parses bounded font bytes using optional fontkit and WOFF2 peers; no font fetching occurs here. Argument and resource failures use GeometryError; parser and decoder exceptions propagate unchanged.
 
 **prepareVectorFont**(`bytes`: `Uint8Array`, `options?`: [`VectorFontOptions`](VectorFontOptions.md)): `Promise`\<[`VectorFont`](VectorFont.md)\>
 
@@ -43,4 +43,4 @@ async function prepareLabel(fontBytes: Uint8Array) {
 - [VectorFont](VectorFont.md)
 - [VectorFontOptions](VectorFontOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/text.md

@@ -18,4 +18,4 @@ Paths and metrics use Y-up millimetres and a baseline origin. Empty layouts can
 
 - [Font preparation](text/categories/font-preparation.md) — Prepare bounded exact font bytes and reusable vector layouts.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/engine/construction-operations.js

@@ -2,7 +2,9 @@ import { edgeTreatmentSetbacks } from "../geometry/edge-finishing.js";
 import { GeometryError } from "../geometry/errors.js";
 import { resolveExtrusionContourDivisions, resolveExtrusionControls, } from "../geometry/extrusion.js";
 import { heightfieldMesh } from "../geometry/heightfield.js";
+import { vector2Data, vector3Data } from "../geometry/math/vector-value.js";
 import { assertMeshAllocationWithinLimits } from "../geometry/model-limits.js";
+import { path3InputData } from "../geometry/paths/path-value.js";
 import { assertPrimitiveOptions } from "../geometry/primitive-resolvers.js";
 import { matchProfiles } from "../geometry/profiles/matched.js";
 import { resolveGeometryResolution } from "../geometry/resolution.js";
@@ -20,11 +22,12 @@ export function createConstructionOperations(environment, sections) {
     const { module, scope, limits, assertActive, throwGeometryError, resolveHandle, nativeSolid, nativeSection, wrapSolid, wrapSection, ownSolid, ownSection, validateFiniteNumber, requirePositiveNumber, validateCoordinates, assertOperandCount, assertMeshAllocation, withResolutionDefaults, resolveCircularSegments, } = environment;
     const cuttingPlane = (value, operation) => {
         assertPrimitiveOptions(value, operation);
-        validateCoordinates(value.normal, 3, operation);
-        const magnitude = Math.max(...value.normal.map(Math.abs));
+        const inputNormal = vector3Data(value.normal);
+        validateCoordinates(inputNormal, 3, operation);
+        const magnitude = Math.max(...inputNormal.map(Math.abs));
         if (magnitude === 0)
             throwGeometryError("DEGENERATE_GEOMETRY", operation, "Plane normals must be nonzero.");
-        const scaled = value.normal.map((coordinate) => coordinate / magnitude);
+        const scaled = inputNormal.map((coordinate) => coordinate / magnitude);
         const length = Math.hypot(...scaled);
         const normal = [scaled[0] / length, scaled[1] / length, scaled[2] / length];
         return { normal, offset: validateFiniteNumber(value.offset ?? 0, operation) };
@@ -55,7 +58,7 @@ export function createConstructionOperations(environment, sections) {
             const policy = resolveGeometryResolution(resolved.resolution, resolved.limits);
             // Untwisted uniform taper has planar sides. Its default two-cap topology
             // needs no native contour extraction or longitudinal interpolation.
-            if (controls.twistDegrees === 0 &&
+            if (controls.twist === 0 &&
                 controls.scales[0] === controls.scales[1] &&
                 policy.maxSegmentLength === undefined)
                 divisions = 0;
@@ -69,7 +72,7 @@ export function createConstructionOperations(environment, sections) {
         // a hole also bounds disconnected Sections, without extracting native point data.
         triangles = Math.max(0, vertices * 2 + 4 * native.numContour() - 8);
         assertMeshAllocationWithinLimits(vertices, triangles, vertices * 12 + triangles * 12, "extrude", resolved.limits);
-        return ownSolid(native.extrude(value.height, divisions, controls.twistDegrees, controls.scales, controls.center));
+        return ownSolid(native.extrude(value.height, divisions, controls.twist, controls.scales, controls.center));
     };
     const boolean = (values, operation) => {
         assertOperandCount(values, operation);
@@ -131,13 +134,21 @@ export function createConstructionOperations(environment, sections) {
                 assertOperandCount(value.sections, "hull");
                 return ownSection(module.CrossSection.hull(value.sections.map(nativeSection)));
             }
-            if (value.points !== undefined && value.points[0]?.length === 2) {
+            if (value.points !== undefined) {
+                const pointArray = Array.isArray(value.points);
+                if (!pointArray)
+                    throwGeometryError("INVALID_ARGUMENT", "hull", "Hull points must be an array.");
+                assertSamplingCount(value.points.length, "hull", 100_000);
+            }
+            const first = value.points?.[0];
+            const coordinates = typeof first === "object" && first !== null && "toArray" in first ? first.toArray() : first;
+            if (value.points !== undefined && coordinates?.length === 2) {
                 const points = value.points;
-                const pointInputs = points;
                 if (!Array.isArray(points) || points.length < 3)
                     throwGeometryError("INVALID_ARGUMENT", "hull", "A planar hull needs at least three points.");
                 assertSamplingCount(points.length, "hull", Math.min(100_000, limits.maxProfilePoints));
-                const copied = pointInputs.map((point) => {
+                const copied = points.map((input) => {
+                    const point = vector2Data(input);
                     validateCoordinates(point, 2, "hull");
                     return [point[0], point[1]];
                 });
@@ -146,8 +157,12 @@ export function createConstructionOperations(environment, sections) {
                     throwGeometryError("DEGENERATE_GEOMETRY", "hull", "Hull points must span positive area.");
                 return wrapSection(native);
             }
+            if (value.points !== undefined && value.points.length < 4)
+                throwGeometryError("INVALID_ARGUMENT", "hull", "A point hull needs at least four XYZ points.");
             return wrapSolid(kernel.hull(scope, !hasSolids
-                ? { points: value.points }
+                ? {
+                    points: value.points.map((point) => vector3Data(point)),
+                }
                 : { solids: value.solids.map(nativeSolid) }));
         }),
         minkowskiSum: (a, b) => wrapSolid(kernel.minkowskiSum(scope, nativeSolid(a), nativeSolid(b))),
@@ -156,7 +171,7 @@ export function createConstructionOperations(environment, sections) {
         revolve: (handle, value = {}) => {
             assertPrimitiveOptions(value, "revolve");
             const native = shapeSection(handle), bounds = native.bounds();
-            const degrees = value.revolveDegrees ?? 360;
+            const degrees = value.degrees ?? 360;
             if (requirePositiveNumber(degrees, "revolve") > 360)
                 throwGeometryError("INVALID_ARGUMENT", "revolve", "Sweep must not exceed 360 degrees.");
             const selected = withResolutionDefaults(value);
@@ -193,15 +208,17 @@ export function createConstructionOperations(environment, sections) {
         },
         sweep: (shape, path, value = {}) => {
             assertActive();
-            const selected = withResolutionDefaults(value);
+            const defaults = withResolutionDefaults(value);
+            const data = path3InputData(path, value.closed, defaults.limits);
+            const selected = { ...defaults, closed: data.closed };
             if (corresponding(shape))
-                return solidFromMesh(buildProfileSweepMesh(module, shape, path, selected, selected.limits));
+                return solidFromMesh(buildProfileSweepMesh(module, shape, data.points, selected, selected.limits));
             const profile = sectionProfile(shape);
             const singleComponent = profile.components.length === 1 ? profile.components[0] : undefined;
             const contours = singleComponent?.holes.length === 0 ? [singleComponent.outer.points] : [];
             if (contours.length === 1)
-                return solidFromMesh(sweepMesh(contours[0], path, selected));
-            return solidFromMesh(buildProfileSweepMesh(module, profile, path, selected, selected.limits));
+                return solidFromMesh(sweepMesh(contours[0], data.points, selected));
+            return solidFromMesh(buildProfileSweepMesh(module, profile, data.points, selected, selected.limits));
         },
         heightfield: (value) => {
             assertActive();