@metamesh/modeling 0.13.0 → 0.15.0

package/dist/docs/reference/geometry/{buildHelicalThreadRidgeMesh.md → helicalThreadRidgeMesh.md}

@@ -1,8 +1,8 @@
-# buildHelicalThreadRidgeMesh
+# helicalThreadRidgeMesh
 
 Builds closed thread-ridge components with every profile locked to the shaft's radial/axial frame. The mesh is intended for union with its minor-envelope cylinder and never owns WASM objects.
 
-**buildHelicalThreadRidgeMesh**(`options`: [`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
+**helicalThreadRidgeMesh**(`options`: [`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -20,7 +20,7 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 
   Nominal major diameter before any caller-owned fit compensation.
 
-- [`profile`](HelicalThreadRidgeMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](HelicalThreadRidgeMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -37,7 +37,7 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](HelicalThreadRidgeMeshOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](HelicalThreadRidgeMeshOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -65,4 +65,4 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 - [HelicalThreadRidgeMeshOptions](HelicalThreadRidgeMeshOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/{buildHelicalThreadSolidMesh.md → helicalThreadSolidMesh.md}

@@ -1,8 +1,8 @@
-# buildHelicalThreadSolidMesh
+# helicalThreadSolidMesh
 
 Builds one closed threaded cylinder without a ridge/core Boolean seam.
 
-**buildHelicalThreadSolidMesh**(`options`: [`HelicalThreadSolidMeshOptions`](HelicalThreadSolidMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
+**helicalThreadSolidMesh**(`options`: [`HelicalThreadSolidMeshOptions`](HelicalThreadSolidMeshOptions.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -26,7 +26,7 @@ arrays.
 
   Nominal major diameter before any caller-owned fit compensation.
 
-- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](HelicalThreadSolidMeshOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
@@ -43,7 +43,7 @@ arrays.
 
   Explicit output and circular allocation ceilings.
 
-- [`phaseDegrees`](HelicalThreadSolidMeshOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](HelicalThreadSolidMeshOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -99,4 +99,4 @@ arrays.
 - [HelicalThreadSolidMeshOptions](HelicalThreadSolidMeshOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/inverseTransform3.md

@@ -2,7 +2,7 @@
 
 Inverts a finite, non-singular affine transform.
 
-**inverseTransform3**(`transform`: [`Transform3`](Transform3.md)): [`Transform3`](Transform3.md)
+**inverseTransform3**(`transform`: [`Transform3Matrix`](Transform3Matrix.md)): [`Transform3Matrix`](Transform3Matrix.md)
 
 
 
@@ -10,7 +10,7 @@ Inverts a finite, non-singular affine transform.
 
 <a id="transform"></a>
 
-**`transform`** · [`Transform3`](Transform3.md) · Required
+**`transform`** · [`Transform3Matrix`](Transform3Matrix.md) · Required
 
 Transform to invert.
 
@@ -18,13 +18,17 @@ Transform to invert.
 
 ## Returns
 
-[`Transform3`](Transform3.md)
+[`Transform3Matrix`](Transform3Matrix.md)
 
 A new frozen transform whose composition with the input is identity.
 
 
 ## Related APIs
 
-- [Transform3](Transform3.md)
+- [Transform3Matrix](Transform3Matrix.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/isGeometryError.md

@@ -23,4 +23,4 @@ Recognizes structured geometry errors from separately bundled Modeling copies in
 
 - [GeometryError](GeometryError.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/joinTriangleMeshes.md

@@ -33,4 +33,4 @@ Fresh typed arrays with indices offset to their source vertex ranges.
 
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/layoutRow.md

@@ -2,7 +2,7 @@
 
 Returns immutable translations for a +X row of finite XYZ bounds with a nonnegative gap. Each minimum Y/Z becomes zero, and the first minimum X becomes zero. Supply bounds after any intended part rotation; translations apply to those bounds. An empty input returns [].
 
-**layoutRow**(`bounds`: readonly [`Bounds3`](Bounds3.md)[], `options?`: [`RowLayoutOptions`](RowLayoutOptions.md)): readonly [`Vector3`](Vector3.md)[]
+**layoutRow**(`bounds`: readonly [`Bounds3`](Bounds3.md)[], `options?`: [`RowLayoutOptions`](RowLayoutOptions.md)): readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 
 
 
@@ -26,18 +26,18 @@ Returns immutable translations for a +X row of finite XYZ bounds with a nonnegat
 
 ## Returns
 
-readonly [`Vector3`](Vector3.md)[]
+readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 
 
 ## Related APIs
 
 - [Bounds3](Bounds3.md)
 - [RowLayoutOptions](RowLayoutOptions.md)
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/length2.md

@@ -0,0 +1,30 @@
+# length2
+
+Returns Euclidean vector length in the vector's coordinate units.
+
+`const` **length2**: (`vector`: [`Vector2Tuple`](Vector2Tuple.md)) => `number`
+
+
+
+## Parameters
+
+<a id="vector"></a>
+
+**`vector`** · [`Vector2Tuple`](Vector2Tuple.md) · Required
+
+
+
+## Returns
+
+`number`
+
+
+## Related APIs
+
+- [Vector2Tuple](Vector2Tuple.md)
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/length3.md

@@ -2,7 +2,7 @@
 
 Returns Euclidean vector length in the vector's coordinate units.
 
-`const` **length3**: (`vector`: [`Vector3`](Vector3.md)) => `number`
+`const` **length3**: (`vector`: [`Vector3Tuple`](Vector3Tuple.md)) => `number`
 
 
 
@@ -10,7 +10,7 @@ Returns Euclidean vector length in the vector's coordinate units.
 
 <a id="vector"></a>
 
-**`vector`** · [`Vector3`](Vector3.md) · Required
+**`vector`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
 
 
 
@@ -21,6 +21,10 @@ Returns Euclidean vector length in the vector's coordinate units.
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/lerp2.md

@@ -0,0 +1,42 @@
+# lerp2
+
+Linearly interpolates two vectors; `t` is dimensionless and may extrapolate.
+
+`const` **lerp2**: (`a`: [`Vector2Tuple`](Vector2Tuple.md), `b`: [`Vector2Tuple`](Vector2Tuple.md), `t`: `number`) => [`Vector2Tuple`](Vector2Tuple.md)
+
+
+
+## Parameters
+
+<a id="a"></a>
+
+**`a`** · [`Vector2Tuple`](Vector2Tuple.md) · Required
+
+
+
+<a id="b"></a>
+
+**`b`** · [`Vector2Tuple`](Vector2Tuple.md) · Required
+
+
+
+<a id="t"></a>
+
+**`t`** · `number` · Required
+
+
+
+## Returns
+
+[`Vector2Tuple`](Vector2Tuple.md)
+
+
+## Related APIs
+
+- [Vector2Tuple](Vector2Tuple.md)
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/lerp3.md

@@ -2,7 +2,7 @@
 
 Linearly interpolates two vectors; `t` is dimensionless and may extrapolate.
 
-`const` **lerp3**: (`a`: [`Vector3`](Vector3.md), `b`: [`Vector3`](Vector3.md), `t`: `number`) => [`Vector3`](Vector3.md)
+`const` **lerp3**: (`a`: [`Vector3Tuple`](Vector3Tuple.md), `b`: [`Vector3Tuple`](Vector3Tuple.md), `t`: `number`) => [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -10,13 +10,13 @@ Linearly interpolates two vectors; `t` is dimensionless and may extrapolate.
 
 <a id="a"></a>
 
-**`a`** · [`Vector3`](Vector3.md) · Required
+**`a`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
 
 
 
 <a id="b"></a>
 
-**`b`** · [`Vector3`](Vector3.md) · Required
+**`b`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
 
 
 
@@ -28,11 +28,15 @@ Linearly interpolates two vectors; `t` is dimensionless and may extrapolate.
 
 ## Returns
 
-[`Vector3`](Vector3.md)
+[`Vector3Tuple`](Vector3Tuple.md)
 
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/linearPatternTransforms.md

@@ -1,8 +1,8 @@
 # linearPatternTransforms
 
-Equal linear placements in millimetres, including the original at the origin.
+Spatial XYZ matrix placements in millimetres, including the original at the origin.
 
-**linearPatternTransforms**(`options`: [`LinearPatternOptions`](LinearPatternOptions.md)): readonly [`Transform3`](Transform3.md)[]
+**linearPatternTransforms**(`options`: [`LinearPatternOptions`](LinearPatternOptions.md)): readonly [`Transform3Matrix`](Transform3Matrix.md)[]
 
 
 
@@ -16,16 +16,16 @@ Equal linear placements in millimetres, including the original at the origin.
 
 ## Returns
 
-readonly [`Transform3`](Transform3.md)[]
+readonly [`Transform3Matrix`](Transform3Matrix.md)[]
 
 
 ## Related APIs
 
 - [LinearPatternOptions](LinearPatternOptions.md)
-- [Transform3](Transform3.md)
+- [Transform3Matrix](Transform3Matrix.md)
 
 ## Guides
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/loftMesh.md

@@ -19,6 +19,7 @@ seam and original vertices; unequal counts gain subdivisions or repeated fan slo
 Both ends use ear-clipped caps, supporting concave profiles without center fans.
 Intermediate slices interpolate placed world vertices, never frame axes.
 Transformed coordinates must fit finite Float32 mesh storage.
+Path2 profiles must be closed; raw point collections are interpreted as closed.
 
 ## Parameters
 
@@ -69,4 +70,4 @@ Transformed coordinates must fit finite Float32 mesh storage.
 - [LoftOptions](LoftOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/matchProfiles.md

@@ -48,4 +48,4 @@ readonly [`CorrespondingProfile`](CorrespondingProfile.md)[]
 - [MatchProfilesOptions](MatchProfilesOptions.md)
 - [Profile](Profile.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/measureInternalCylindricalGearPairMotion.md

@@ -6,7 +6,8 @@ Measures sampled kinematic interference over one tooth cycle of an internal gear
 
 
 
-The driver and ring rotate in the same direction at their resolved tooth-count ratio. Each
+The driver and ring start with half-tooth offsets for odd tooth counts, then rotate in the
+same direction at their resolved tooth-count ratio. Each
 sampled pinion outline is subtracted from the ring's center-and-space opening; remaining area is
 solid overlap. This catches involute, tip, and trimming interference that a single assembled pose
 misses. It is a deterministic model check, not a certified gear-rating calculation.
@@ -44,4 +45,4 @@ misses. It is a deterministic model check, not a certified gear-rating calculati
 - [CylindricalGearPairMotionReport](CylindricalGearPairMotionReport.md)
 - [CylindricalGearPairSpec](CylindricalGearPairSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/meshBounds.md

@@ -32,4 +32,4 @@ Fresh immutable minimum and maximum XYZ tuples.
 - [Bounds3](Bounds3.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/minimumCylindricalGearToothCountWithoutUndercut.md

@@ -2,7 +2,7 @@
 
 Returns the smallest unshifted full-depth external tooth count that avoids rack-cutter undercut.
 
-**minimumCylindricalGearToothCountWithoutUndercut**(`spec?`: `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngleDegrees"` \| `"pressureAngleDegrees"`\>\>): `number`
+**minimumCylindricalGearToothCountWithoutUndercut**(`spec?`: `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngle"` \| `"pressureAngle"`\>\>): `number`
 
 
 
@@ -13,7 +13,7 @@ count `z_v = z / cos³(beta)`, so increasing helix angle can reduce the physical
 
 <a id="spec"></a>
 
-**`spec`** · `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngleDegrees"` \| `"pressureAngleDegrees"`\>\> · Optional
+**`spec`** · `Readonly`\<`Pick`\<[`CylindricalGearSpec`](CylindricalGearSpec.md), `"helixAngle"` \| `"pressureAngle"`\>\> · Optional
 
 
 
@@ -26,4 +26,4 @@ count `z_v = z / cos³(beta)`, so increasing helix angle can reduce the physical
 
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalize2.md

@@ -0,0 +1,36 @@
+# normalize2
+
+Returns a unit vector; `epsilon` is a finite, non-negative length threshold (default `1e-12`). Rejects invalid thresholds, nonfinite lengths, and lengths at or below the threshold with `INVALID_TOLERANCE`, `NON_FINITE_VALUE`, and `DEGENERATE_GEOMETRY` respectively.
+
+`const` **normalize2**: (`vector`: [`Vector2Tuple`](Vector2Tuple.md), `epsilon?`: `number`) => [`Vector2Tuple`](Vector2Tuple.md)
+
+
+
+## Parameters
+
+<a id="vector"></a>
+
+**`vector`** · [`Vector2Tuple`](Vector2Tuple.md) · Required
+
+
+
+<a id="epsilon"></a>
+
+**`epsilon`** · `number` · Optional
+
+
+
+## Returns
+
+[`Vector2Tuple`](Vector2Tuple.md)
+
+
+## Related APIs
+
+- [Vector2Tuple](Vector2Tuple.md)
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalize3.md

@@ -1,8 +1,8 @@
 # normalize3
 
-Normalizes a finite vector and rejects nonfinite lengths or lengths at or below `epsilon`.
+Returns a unit vector; `epsilon` is a finite, non-negative length threshold (default `1e-12`). Rejects invalid thresholds, nonfinite lengths, and lengths at or below the threshold with `INVALID_TOLERANCE`, `NON_FINITE_VALUE`, and `DEGENERATE_GEOMETRY` respectively.
 
-`const` **normalize3**: (`vector`: [`Vector3`](Vector3.md), `epsilon?`: `number`) => [`Vector3`](Vector3.md)
+`const` **normalize3**: (`vector`: [`Vector3Tuple`](Vector3Tuple.md), `epsilon?`: `number`) => [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -10,7 +10,7 @@ Normalizes a finite vector and rejects nonfinite lengths or lengths at or below
 
 <a id="vector"></a>
 
-**`vector`** · [`Vector3`](Vector3.md) · Required
+**`vector`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
 
 
 
@@ -22,11 +22,15 @@ Normalizes a finite vector and rejects nonfinite lengths or lengths at or below
 
 ## Returns
 
-[`Vector3`](Vector3.md)
+[`Vector3Tuple`](Vector3Tuple.md)
 
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalizeContour.md

@@ -2,7 +2,7 @@
 
 Cleans and validates one closed loop.
 
-**normalizeContour**(`input`: readonly [`Vector2`](Vector2.md)[], `counterClockwise`: `boolean`, `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`Contour`](Contour.md)
+**normalizeContour**(`input`: readonly [`Vector2Tuple`](Vector2Tuple.md)[], `counterClockwise`: `boolean`, `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`Contour`](Contour.md)
 
 
 
@@ -15,7 +15,7 @@ returned unchanged when their winding and tolerance policy match.
 
 <a id="input"></a>
 
-**`input`** · readonly [`Vector2`](Vector2.md)[] · Required
+**`input`** · readonly [`Vector2Tuple`](Vector2Tuple.md)[] · Required
 
 
 
@@ -40,6 +40,6 @@ returned unchanged when their winding and tolerance policy match.
 
 - [Contour](Contour.md)
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalizePolygon.md

@@ -2,7 +2,7 @@
 
 Validates explicit polygon topology and normalizes its winding.
 
-**normalizePolygon**(`polygon`: [`Polygon`](Polygon.md), `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`Polygon`](Polygon.md)
+**normalizePolygon**(`polygon`: [`PolygonData`](PolygonData.md), `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`PolygonData`](PolygonData.md)
 
 
 
@@ -14,7 +14,7 @@ may be returned unchanged under the same tolerance policy.
 
 <a id="polygon"></a>
 
-**`polygon`** · [`Polygon`](Polygon.md) · Required
+**`polygon`** · [`PolygonData`](PolygonData.md) · Required
 
 
 
@@ -26,12 +26,12 @@ may be returned unchanged under the same tolerance policy.
 
 ## Returns
 
-[`Polygon`](Polygon.md)
+[`PolygonData`](PolygonData.md)
 
 
 ## Related APIs
 
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [Polygon](Polygon.md)
+- [PolygonData](PolygonData.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/normalizeRegion.md

@@ -2,7 +2,7 @@
 
 Validates a disjoint explicit region and returns immutable normalized data. Previously validated immutable results may be returned unchanged under the same tolerance policy.
 
-**normalizeRegion**(`region`: [`Region`](Region.md), `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`Region`](Region.md)
+**normalizeRegion**(`region`: [`RegionData`](RegionData.md), `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`RegionData`](RegionData.md)
 
 
 
@@ -10,7 +10,7 @@ Validates a disjoint explicit region and returns immutable normalized data. Prev
 
 <a id="region"></a>
 
-**`region`** · [`Region`](Region.md) · Required
+**`region`** · [`RegionData`](RegionData.md) · Required
 
 
 
@@ -22,12 +22,12 @@ Validates a disjoint explicit region and returns immutable normalized data. Prev
 
 ## Returns
 
-[`Region`](Region.md)
+[`RegionData`](RegionData.md)
 
 
 ## Related APIs
 
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [Region](Region.md)
+- [RegionData](RegionData.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/optimizePlanarPatches.md

@@ -28,44 +28,44 @@ Closed, consistently wound indexed triangle mesh in arbitrary consistent units.
 
 Patch eligibility, numeric tolerance, and deterministic work bounds.
 
-- [`maximumFlipAttempts`](PlanarMeshOptimizationOptions.md#maximumflipattempts) · `number` · Optional
+- [`maxFlipAttempts`](PlanarMeshOptimizationOptions.md#maxflipattempts) · `number` · Optional
 
   Maximum attempted edge evaluations. By default this is twenty times the initial candidate
   edge count, capped at `1000000`.
 
-- [`maximumEdgeRevisits`](PlanarMeshOptimizationOptions.md#maximumedgerevisits) · `number` · Optional
+- [`maxEdgeRevisits`](PlanarMeshOptimizationOptions.md#maxedgerevisits) · `number` · Optional
 
   Maximum times one edge may be reconsidered after neighbouring flips. Defaults to `12`.
 
-- [`maximumPatchTriangleCount`](PlanarMeshOptimizationOptions.md#maximumpatchtrianglecount) · `number` · Optional
+- [`maxPatchTriangles`](PlanarMeshOptimizationOptions.md#maxpatchtriangles) · `number` · Optional
 
   Maximum triangles allowed in one selected patch. Defaults to `50000`.
 
-- [`maximumProcessedTriangleCount`](PlanarMeshOptimizationOptions.md#maximumprocessedtrianglecount) · `number` · Optional
+- [`maxProcessedTriangles`](PlanarMeshOptimizationOptions.md#maxprocessedtriangles) · `number` · Optional
 
   Maximum cumulative triangles across selected patches. Defaults to `200000`.
 
-- [`minimumPatchTriangleCount`](PlanarMeshOptimizationOptions.md#minimumpatchtrianglecount) · `number` · Optional
+- [`minPatchTriangles`](PlanarMeshOptimizationOptions.md#minpatchtriangles) · `number` · Optional
 
   Minimum triangles required before a planar patch is eligible. Defaults to `8`.
 
-- [`triggerMaximumAspectRatio`](PlanarMeshOptimizationOptions.md#triggermaximumaspectratio) · `number` · Optional
+- [`triggerMaxAspectRatio`](PlanarMeshOptimizationOptions.md#triggermaxaspectratio) · `number` · Optional
 
   Select patches whose worst normalized aspect ratio exceeds this value. Defaults to `12`.
 
-- [`triggerMaximumFanRatio`](PlanarMeshOptimizationOptions.md#triggermaximumfanratio) · `number` · Optional
+- [`triggerMaxFanRatio`](PlanarMeshOptimizationOptions.md#triggermaxfanratio) · `number` · Optional
 
   Select patches whose largest per-vertex triangle share exceeds this ratio. Defaults to `0.2`.
 
-- [`triggerMaximumVertexTriangleIncidence`](PlanarMeshOptimizationOptions.md#triggermaximumvertextriangleincidence) · `number` · Optional
+- [`triggerMaxVertexTriangleIncidence`](PlanarMeshOptimizationOptions.md#triggermaxvertextriangleincidence) · `number` · Optional
 
   Select patches whose largest vertex triangle incidence exceeds this value. Defaults to `16`.
 
-- [`triggerMinimumAngleDegrees`](PlanarMeshOptimizationOptions.md#triggerminimumangledegrees) · `number` · Optional
+- [`triggerMinAngleDegrees`](PlanarMeshOptimizationOptions.md#triggerminangledegrees) · `number` · Optional
 
   Select patches whose smallest interior angle is below this many degrees. Defaults to `8`.
 
-- [`maximumTriangleCount`](PlanarMeshOptimizationOptions.md#maximumtrianglecount) · `number` · Optional
+- [`maxTriangles`](PlanarMeshOptimizationOptions.md#maxtriangles) · `number` · Optional
 
   Maximum number of triangles inspected. Defaults to `200000`.
 
@@ -88,4 +88,4 @@ Optimized connectivity and before/after diagnostics, or an unchanged safe fallba
 - [PlanarMeshOptimizationResult](PlanarMeshOptimizationResult.md)
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.