@metamesh/modeling 0.13.0 → 0.15.0

package/dist/docs/reference/model/Solid.md

@@ -1,6 +1,6 @@
 # Solid
 
-Immutable deferred solid recipe belonging to exactly one model session. Methods run during synchronous generation, preserve their receiver, and use millimetres and degrees. A no-op may reuse the receiver; final part placement belongs in `part` options.
+Immutable deferred solid recipe. Construction and composition require no engine. Ordinary recipes may be reused across sessions regardless of where constructed. Explicit resolution settings are captured; unspecified settings inherit the evaluating host's defaults. Observed components and recipes using them can only be evaluated in their originating session. Methods leave the source unchanged and use millimetres and degrees. A no-op may reuse the receiver; final part placement belongs in `part` options.
 
 ## Example: Shape a body with a through bore
 
@@ -20,7 +20,7 @@ const body = box({ size: [30, 20, 6] })
 
 
 
-Compile-time ownership brand for a same-session solid.
+Compile-time identity brand for an immutable solid recipe.
 
 ## Methods
 
@@ -28,7 +28,7 @@ Compile-time ownership brand for a same-session solid.
 
 
 
-**translate**(`offset`: [`Vector3`](Vector3.md)): `Solid`
+**translate**(`offset`: [`Vector3Input`](Vector3Input.md)): `Solid`
 
 
 
@@ -38,7 +38,7 @@ Translates XYZ coordinates in millimetres.
 
 <a id="offset"></a>
 
-**`offset`** · [`Vector3`](Vector3.md) · Required
+**`offset`** · [`Vector3Input`](Vector3Input.md) · Required
 
 
 
@@ -52,17 +52,28 @@ Translates XYZ coordinates in millimetres.
 
 
 
-**rotate**(`degrees`: [`Vector3`](Vector3.md)): `Solid`
+**rotate**(`degrees`: [`Vector3Input`](Vector3Input.md), `options?`: [`Pivot3Options`](Pivot3Options.md)): `Solid`
 
 
 
-Rotates about the origin using XYZ Euler angles in degrees.
+Rotates about global X, then Y, then Z in degrees.
+`options.pivot` is a fixed world-space point; omission uses the coordinate origin.
 
 #### Parameters
 
 <a id="degrees"></a>
 
-**`degrees`** · [`Vector3`](Vector3.md) · Required
+**`degrees`** · [`Vector3Input`](Vector3Input.md) · Required
+
+
+
+<a id="options"></a>
+
+**`options`** · [`Pivot3Options`](Pivot3Options.md) · Optional
+
+- [`pivot`](Pivot3Options.md#pivot) · [`Vector3Input`](Vector3Input.md) · Optional
+
+  World-space point left fixed by rotation or scaling.
 
 
 
@@ -76,17 +87,28 @@ Rotates about the origin using XYZ Euler angles in degrees.
 
 
 
-**scale**(`factors`: `number` \| [`Vector3`](Vector3.md)): `Solid`
+**scale**(`factors`: `number` \| [`Vector3Input`](Vector3Input.md), `options?`: [`Pivot3Options`](Pivot3Options.md)): `Solid`
 
 
 
-Nonsingular scaling about the origin.
+Uniform or per-axis nonsingular scaling; negative factors reflect geometry.
+`options.pivot` is a fixed world-space point; omission uses the coordinate origin.
 
 #### Parameters
 
 <a id="factors"></a>
 
-**`factors`** · `number` \| [`Vector3`](Vector3.md) · Required
+**`factors`** · `number` \| [`Vector3Input`](Vector3Input.md) · Required
+
+
+
+<a id="options-1"></a>
+
+**`options`** · [`Pivot3Options`](Pivot3Options.md) · Optional
+
+- [`pivot`](Pivot3Options.md#pivot) · [`Vector3Input`](Vector3Input.md) · Optional
+
+  World-space point left fixed by rotation or scaling.
 
 
 
@@ -100,7 +122,7 @@ Nonsingular scaling about the origin.
 
 
 
-**mirror**(`normal`: [`Vector3`](Vector3.md)): `Solid`
+**mirror**(`normal`: [`Vector3Input`](Vector3Input.md)): `Solid`
 
 
 
@@ -110,7 +132,7 @@ Reflection across an origin line/plane.
 
 <a id="normal"></a>
 
-**`normal`** · [`Vector3`](Vector3.md) · Required
+**`normal`** · [`Vector3Input`](Vector3Input.md) · Required
 
 
 
@@ -124,17 +146,17 @@ Reflection across an origin line/plane.
 
 
 
-**transform**(`matrix`: [`Transform3`](Transform3.md)): `Solid`
+**transform**(`placement`: [`Transform3Input`](Transform3Input.md)): `Solid`
 
 
 
-Row-major affine transform preserving dimensionality.
+Applies a reusable XYZ placement or canonical row-major matrix.
 
 #### Parameters
 
-<a id="matrix"></a>
+<a id="placement"></a>
 
-**`matrix`** · [`Transform3`](Transform3.md) · Required
+**`placement`** · [`Transform3Input`](Transform3Input.md) · Required
 
 
 
@@ -144,6 +166,22 @@ Row-major affine transform preserving dimensionality.
 
 ***
 
+### toTriangleMesh()
+
+
+
+**toTriangleMesh**(): [`TriangleMesh`](TriangleMesh.md)
+
+
+
+Copies manufacturing mesh buffers for interchange; requires an active model execution.
+
+#### Returns
+
+[`TriangleMesh`](TriangleMesh.md)
+
+***
+
 ### subtract()
 
 
@@ -203,7 +241,7 @@ and the solid's existing native tolerance. Choose it from the detail you can aff
 
 
 
-Returns a new same-session handle with copied named anchors; existing names may be replaced.
+Returns a new recipe with copied named anchors; existing names may be replaced.
 
 #### Parameters
 
@@ -243,7 +281,7 @@ Places an explicit or named source anchor against an explicit target anchor.
 
 
 
-<a id="options"></a>
+<a id="options-2"></a>
 
 **`options`** · [`AttachOptions`](AttachOptions.md) · Optional
 
@@ -253,9 +291,9 @@ Places an explicit or named source anchor against an explicit target anchor.
 
 - [`gap`](AttachOptions.md#gap) · `number` · Optional
 
-  Separation along the target anchor's outward direction in millimetres.
+  Separation along the target anchor's outward direction in model units.
 
-- [`spinDegrees`](AttachOptions.md#spindegrees) · `number` · Optional
+- [`spin`](AttachOptions.md#spin) · `number` · Optional
 
   Additional right-handed roll about the attached direction, in degrees.
 
@@ -271,15 +309,15 @@ Places an explicit or named source anchor against an explicit target anchor.
 
 ***
 
-### setTolerance()
+### withTolerance()
 
 
 
-**setTolerance**(`tolerance`: `number`): `Solid`
+**withTolerance**(`tolerance`: `number`): `Solid`
 
 
 
-Replaces native tolerance on an immutable copy; zero selects the kernel minimum.
+Returns an immutable copy with this native tolerance; zero selects the kernel minimum.
 
 #### Parameters
 
@@ -338,13 +376,15 @@ Takes a filled horizontal slice at Z millimetres.
 
 - [Anchor3](Anchor3.md)
 - [AttachOptions](AttachOptions.md)
+- [Pivot3Options](Pivot3Options.md)
 - [Section](Section.md)
-- [Transform3](Transform3.md)
-- [Vector3](Vector3.md)
+- [Transform3Input](Transform3Input.md)
+- [TriangleMesh](TriangleMesh.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/SolidInspection.md

@@ -20,7 +20,7 @@ Whether this native solid contains no material.
 
 
 
-`readonly` **max**: [`Vector3`](Vector3.md)
+`readonly` **max**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -32,7 +32,7 @@ Inclusive maximum coordinates in millimetres.
 
 
 
-`readonly` **min**: [`Vector3`](Vector3.md)
+`readonly` **min**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -40,15 +40,15 @@ Inclusive minimum coordinates in millimetres.
 
 ***
 
-### parts
+### componentCount
 
 
 
-`readonly` **parts**: `number`
+`readonly` **componentCount**: `number`
 
 
 
-Number of connected surface shells; inward cavity shells count separately.
+Number of disconnected material components, each retaining enclosed cavities.
 
 ***
 
@@ -89,10 +89,10 @@ Effective native geometric tolerance in millimetres.
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/{SolidRayHit.md → SolidSegmentHit.md}

@@ -1,4 +1,4 @@
-# SolidRayHit
+# SolidSegmentHit
 
 Copied surface intersection from a finite directed segment. Distance is in millimetres.
 
@@ -24,7 +24,7 @@ Copied numeric native face identity.
 
 
 
-Distance from the ray origin in millimetres.
+Distance from the segment origin in millimetres.
 
 ***
 
@@ -32,7 +32,7 @@ Distance from the ray origin in millimetres.
 
 
 
-`readonly` **position**: [`Vector3`](Vector3.md)
+`readonly` **position**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -44,7 +44,7 @@ Intersection position in millimetres.
 
 
 
-`readonly` **normal**: [`Vector3`](Vector3.md)
+`readonly` **normal**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -53,6 +53,6 @@ Outward unit surface normal at the intersection.
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/SphereOptions.md

@@ -2,7 +2,7 @@
 
 Exactly one radius or diameter, placement, and tessellation for an origin-centered sphere.
 
-**SphereOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & [`PrimitivePlacement`](PrimitivePlacement.md) & (\{ `radius`: `number`; `diameter?`: `never`; \} \| \{ `diameter`: `number`; `radius?`: `never`; \})
+**SphereOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & [`PrimitiveAttachment`](PrimitiveAttachment.md) & (\{ `radius`: `number`; `diameter?`: `never`; \} \| \{ `diameter`: `number`; `radius?`: `never`; \})
 
 
 
@@ -10,11 +10,11 @@ Exactly one radius or diameter, placement, and tessellation for an origin-center
 ## Related APIs
 
 - [CircularPrimitiveOptions](CircularPrimitiveOptions.md)
-- [PrimitivePlacement](PrimitivePlacement.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
 
 ## Guides
 
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/StarOptions.md

@@ -4,23 +4,23 @@ Alternating outer and inner vertices, centered on the XY origin.
 
 ## Extends
 
-- [`PrimitivePlacement`](PrimitivePlacement.md)
+- [`PrimitiveAttachment`](PrimitiveAttachment.md)
 
 ## Properties
 
-### placement?
+### attachment?
 
 
 
-`readonly` `optional` **placement?**: [`PrimitivePlacementOptions`](PrimitivePlacementOptions.md)
+`readonly` `optional` **attachment?**: [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md)
 
 
 
-Applied after local construction; Section placement must preserve the XY plane.
+Applied after local construction; Section attachment must preserve the XY plane.
 
 #### Inherited from
 
-[`PrimitivePlacement`](PrimitivePlacement.md).[`placement`](PrimitivePlacement.md#placement)
+[`PrimitiveAttachment`](PrimitiveAttachment.md).[`attachment`](PrimitiveAttachment.md#attachment)
 
 ***
 
@@ -72,11 +72,11 @@ Integer outer point count from three through 50000.
 
 ***
 
-### rotationDegrees?
+### rotation?
 
 
 
-`readonly` `optional` **rotationDegrees?**: `number`
+`readonly` `optional` **rotation?**: `number`
 
 
 
@@ -86,8 +86,8 @@ Initial counterclockwise rotation in degrees; defaults to zero.
 ## Related APIs
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-- [PrimitivePlacement](PrimitivePlacement.md)
-- [PrimitivePlacementOptions](PrimitivePlacementOptions.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
+- [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
 
 ## Guides
 
@@ -95,4 +95,4 @@ Initial counterclockwise rotation in degrees; defaults to zero.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/StrokeCap.md

@@ -0,0 +1,16 @@
+# StrokeCap
+
+End-cap treatment for an open stroked path.
+
+**StrokeCap** = `"butt"` \| `"round"` \| `"square"`
+
+
+
+
+## Guides
+
+- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/StrokeJoin.md

@@ -0,0 +1,16 @@
+# StrokeJoin
+
+Join treatment where adjacent stroked path segments meet.
+
+**StrokeJoin** = `"bevel"` \| `"miter"` \| `"round"`
+
+
+
+
+## Guides
+
+- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/StrokeOptions.md

@@ -0,0 +1,91 @@
+# StrokeOptions
+
+Physical stroke and topology controls shared by pure regions and native Sections.
+
+## Properties
+
+### limits?
+
+
+
+`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>
+
+
+
+Explicit path, circular and expanded-profile allocation ceilings.
+
+***
+
+### closed?
+
+
+
+`readonly` `optional` **closed?**: `boolean`
+
+
+
+Raw point closure defaults to false; a Path2 supplies its closure and rejects conflicts.
+
+***
+
+### cap?
+
+
+
+`readonly` `optional` **cap?**: [`StrokeCap`](StrokeCap.md)
+
+
+
+End-cap treatment for an open path. Ignored for closed paths. Default: `butt`.
+
+***
+
+### join?
+
+
+
+`readonly` `optional` **join?**: [`StrokeJoin`](StrokeJoin.md)
+
+
+
+Corner treatment; miters exceeding SVG's default limit of 4 become bevels. Default: `miter`.
+
+***
+
+### resolution?
+
+
+
+`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+
+
+
+Physical tessellation policy for round caps and joins.
+
+***
+
+### width
+
+
+
+`readonly` **width**: `number`
+
+
+
+Positive total stroke width in millimetres, centered on the sampled path.
+
+
+## Related APIs
+
+- [GeometryResolution](GeometryResolution.md)
+- [GeometrySamplingLimits](GeometrySamplingLimits.md)
+- [StrokeCap](StrokeCap.md)
+- [StrokeJoin](StrokeJoin.md)
+
+## Guides
+
+- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/SvgOrigin.md

@@ -13,4 +13,4 @@ Placement of painted SVG geometry after SVG Y-axis inversion.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/SvgPathSectionOptions.md

@@ -75,4 +75,4 @@ Positive uniform factor converting SVG user units to millimetres; defaults to on
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/SvgSectionOptions.md

@@ -63,4 +63,4 @@ Place the painted bounds around the origin or preserve document coordinates.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/SweepOptions.md

@@ -12,7 +12,7 @@ Controls shared by pure mesh construction and filled modeling sweeps.
 
 
 
-Join the path's last station to its first. Open paths retain watertight end caps.
+Raw point closure defaults to false; a Path3 supplies its closure and rejects conflicts.
 
 ***
 
@@ -52,11 +52,11 @@ Physical sampling of nonzero twist; inserted stations retain authored station co
 
 ***
 
-### twistDegrees?
+### twist?
 
 
 
-`readonly` `optional` **twistDegrees?**: `number`
+`readonly` `optional` **twist?**: `number`
 
 
 
@@ -80,7 +80,7 @@ Twist advances by physical path length (default), or normalized authored station
 
 
 
-`readonly` `optional` **scale?**: `number` \| [`Vector2`](Vector2.md) \| readonly [`Vector2`](Vector2.md)[]
+`readonly` `optional` **scale?**: `number` \| [`Vector2Input`](Vector2Input.md) \| readonly [`Vector2Input`](Vector2Input.md)[]
 
 
 
@@ -104,7 +104,7 @@ Corresponding point-index advance at a rotationally equivalent closed seam.
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
 - [SweepOrientation](SweepOrientation.md)
-- [Vector2](Vector2.md)
+- [Vector2Input](Vector2Input.md)
 
 ## Guides
 
@@ -113,4 +113,4 @@ Corresponding point-index advance at a rotationally equivalent closed seam.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/SweepOrientation.md

@@ -2,7 +2,7 @@
 
 Explicit profile-X frame policy; all normals are directed, and selected singular policies reject.
 
-**SweepOrientation** = \{ `kind`: `"transport"`; `initialNormal?`: [`Vector3`](Vector3.md); \} \| \{ `kind`: `"fixed-normal"`; `normal`: [`Vector3`](Vector3.md); \} \| \{ `kind`: `"guide"`; `normal`: [`PathNormalGuide`](PathNormalGuide.md); \} \| \{ `kind`: `"frenet"`; \}
+**SweepOrientation** = \{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Input`](Vector3Input.md); \} \| \{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Input`](Vector3Input.md); \} \| \{ `kind`: `"guide"`; `normal`: [`PathNormalGuide`](PathNormalGuide.md); \} \| \{ `kind`: `"frenet"`; \}
 
 
 
@@ -10,7 +10,7 @@ Explicit profile-X frame policy; all normals are directed, and selected singular
 
 ### Type Literal
 
-\{ `kind`: `"transport"`; `initialNormal?`: [`Vector3`](Vector3.md); \}
+\{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Input`](Vector3Input.md); \}
 
 #### kind
 
@@ -26,7 +26,7 @@ Minimizes frame rotation by parallel transport.
 
 
 
-`readonly` `optional` **initialNormal?**: [`Vector3`](Vector3.md)
+`readonly` `optional` **initialNormal?**: [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -36,7 +36,7 @@ Initial profile +X guide, projected perpendicular to the first tangent.
 
 ### Type Literal
 
-\{ `kind`: `"fixed-normal"`; `normal`: [`Vector3`](Vector3.md); \}
+\{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Input`](Vector3Input.md); \}
 
 #### kind
 
@@ -52,7 +52,7 @@ Projects one fixed world-space normal at every path station.
 
 
 
-`readonly` **normal**: [`Vector3`](Vector3.md)
+`readonly` **normal**: [`Vector3Input`](Vector3Input.md)
 
 
 
@@ -104,7 +104,7 @@ Uses sampled curvature normals; zero-curvature stations reject.
 ## Related APIs
 
 - [PathNormalGuide](PathNormalGuide.md)
-- [Vector3](Vector3.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
@@ -113,4 +113,4 @@ Uses sampled curvature normals; zero-curvature stations reject.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/TextSectionOptions.md

@@ -38,4 +38,4 @@ Local physical sampling policy; exact interval counts take precedence.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/ThreadEndStyle.md

@@ -11,4 +11,4 @@ End shape of a generated helical ridge.
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/ThreadEndTreatmentOptions.md

@@ -114,4 +114,4 @@ clips the periodic profile at the face, and `tapered` ramps into the minor envel
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/model/ThreadHandedness.md

@@ -11,4 +11,4 @@ Direction in which a conventional helical thread advances around +Z.
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.