@metamesh/modeling 0.13.0 → 0.15.0

package/dist/docs/reference/geometry/resolveCylindricalGear.md

@@ -28,4 +28,4 @@ currently supported.
 - [CylindricalGearDimensions](CylindricalGearDimensions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveCylindricalGearPair.md

@@ -28,4 +28,4 @@ the same hand. The function validates those conjugate pitch invariants.
 - [CylindricalGearPairDimensions](CylindricalGearPairDimensions.md)
 - [CylindricalGearPairSpec](CylindricalGearPairSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveExtrusionDivisions.md

@@ -2,7 +2,7 @@
 
 Resolves intermediate profile copies for linear extrusion from physical curve resolution.
 
-**resolveExtrusionDivisions**(`profile`: [`Contour`](Contour.md) \| [`Region`](Region.md), `height`: `number`, `options?`: [`ExtrusionSamplingOptions`](ExtrusionSamplingOptions.md)): `number`
+**resolveExtrusionDivisions**(`profile`: [`Contour`](Contour.md) \| [`RegionData`](RegionData.md), `height`: `number`, `options?`: [`ExtrusionSamplingOptions`](ExtrusionSamplingOptions.md)): `number`
 
 
 
@@ -16,7 +16,7 @@ Exceeding the selected maxPathPoints ceiling raises `COMPLEXITY_LIMIT` instead o
 
 <a id="profile"></a>
 
-**`profile`** · [`Contour`](Contour.md) \| [`Region`](Region.md) · Required
+**`profile`** · [`Contour`](Contour.md) \| [`RegionData`](RegionData.md) · Required
 
 Ordered XY millimetre contours with implicit closing edges.
 
@@ -48,11 +48,11 @@ Twist, scale, exact divisions, and physical resolution controls.
 
   Operation-level physical policy over the nearest model scope.
 
-- [`scaleTop`](ExtrusionSamplingOptions.md#scaletop) · `number` \| [`Vector2`](Vector2.md) · Optional
+- [`scaleTop`](ExtrusionSamplingOptions.md#scaletop) · `number` \| [`Vector2Input`](Vector2Input.md) · Optional
 
   Finite uniform or XY scale of the top profile; defaults to one.
 
-- [`twistDegrees`](ExtrusionSamplingOptions.md#twistdegrees) · `number` · Optional
+- [`twist`](ExtrusionSamplingOptions.md#twist) · `number` · Optional
 
   Finite rotation of the top profile about +Z, in degrees; defaults to zero.
 
@@ -69,6 +69,6 @@ Number of intermediate copies, excluding the two end profiles.
 
 - [Contour](Contour.md)
 - [ExtrusionSamplingOptions](ExtrusionSamplingOptions.md)
-- [Region](Region.md)
+- [RegionData](RegionData.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveGeometrySamplingLimits.md

@@ -23,4 +23,4 @@ Resolves finite positive safe-integer allocation ceilings without ambient state.
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveGeometryTolerance.md

@@ -56,4 +56,4 @@ A complete tolerance policy including the scale-resolved distance.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ResolvedGeometryTolerance](ResolvedGeometryTolerance.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolvePrintableThreadFitPolicy.md

@@ -24,4 +24,4 @@ Resolves and validates a named or caller-defined print-fit policy.
 - [PrintableThreadFit](PrintableThreadFit.md)
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveRackPitch.md

@@ -24,4 +24,4 @@ Resolves a rack segment that is conjugate with the same normal cylindrical pitch
 - [RackPitchDimensions](RackPitchDimensions.md)
 - [RackPitchSpec](RackPitchSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/resolveThreadCircularSegments.md

@@ -7,7 +7,7 @@ Resolves a role-independent, start-aligned facet count from the larger female ma
 
 
 An exact `circularSegments` value must already be divisible by `starts`; it is never silently
-raised. Adaptive policies align upward and fail if that would exceed `maximumSegments`.
+raised. Adaptive policies align upward and fail if that would exceed `maxSegments`.
 
 ## Parameters
 
@@ -19,7 +19,7 @@ raised. Adaptive policies align upward and fail if that would exceed `maximumSeg
 
   Nominal major diameter before role-specific compensation.
 
-- [`profile`](ThreadCircularSegmentsOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
+- [`profile`](ThreadCircularSegmentsOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
 
   Validated mating profile whose pitch and flank capacities govern tessellation.
 
@@ -31,7 +31,7 @@ raised. Adaptive policies align upward and fail if that would exceed `maximumSeg
 
   Printable fit whose larger compensated female envelope governs tessellation.
 
-- [`maximumRadialOutset`](ThreadCircularSegmentsOptions.md#maximumradialoutset) · `number` · Optional
+- [`maxRadialOutset`](ThreadCircularSegmentsOptions.md#maxradialoutset) · `number` · Optional
 
   Maximum active female face outset beyond the compensated major envelope, in millimetres.
   This keeps a compensated male/female pair on one role-independent grid when an internal
@@ -56,4 +56,4 @@ raised. Adaptive policies align upward and fail if that would exceed `maximumSeg
 
 - [ThreadCircularSegmentsOptions](ThreadCircularSegmentsOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/reverseTriangleMesh.md

@@ -27,4 +27,4 @@ Fresh position and index buffers; the input remains unchanged.
 
 - [TriangleMesh](TriangleMesh.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/revolveMesh.md

@@ -2,7 +2,7 @@
 
 Revolves a non-duplicated closed `[radius, z]` profile around +Z.
 
-`const` **revolveMesh**: (`profile`: readonly [`Vector2`](Vector2.md)[], `options?`: [`RevolveOptions`](RevolveOptions.md)) => [`TriangleMesh`](TriangleMesh.md)
+`const` **revolveMesh**: (`input`: [`Path2Input`](Path2Input.md), `options?`: [`RevolveOptions`](RevolveOptions.md)) => [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -12,21 +12,20 @@ axis is emitted once and joined as a triangle fan, avoiding coincident seam
 vertices and zero-area quads. Profile edges that lie entirely on the axis
 collapse to the solid's interior and are intentionally omitted.
 Profile coordinates must fit finite Float32 mesh storage.
+Path2 profiles must be closed; raw point collections have an implicit closing edge.
 
 ## Example: Partial revolution with end caps
 
 ```ts
 // Each point is [radius, Z]; the profile seam is implicit.
-revolveMesh([[0, 0], [12, 0], [8, 20], [0, 20]], { revolveDegrees: 270 });
+revolveMesh([[0, 0], [12, 0], [8, 20], [0, 20]], { degrees: 270 });
 ```
 
 ## Parameters
 
-<a id="profile"></a>
+<a id="input"></a>
 
-**`profile`** · readonly [`Vector2`](Vector2.md)[] · Required
-
-Closed CCW `[radius, z]` profile without a duplicated seam point.
+**`input`** · [`Path2Input`](Path2Input.md) · Required
 
 
 
@@ -47,9 +46,10 @@ Optional physical or exact circumferential sampling controls. Defaults to `{}`.
 
   Operation-level physical tessellation policy over the active model-wide policy.
 
-- [`revolveDegrees`](RevolveOptions.md#revolvedegrees) · `number` · Optional
+- [`degrees`](RevolveOptions.md#degrees) · `number` · Optional · Default: `360`
 
-  Positive angular sweep no greater than 360 degrees; partial revolutions have end caps.
+  Positive sweep in degrees, no greater than 360. Defaults to a full revolution;
+  smaller sweeps form partial revolutions with end caps.
   Segment counts describe a complete circle and scale to this angular span. Native filled
   revolutions require at least three sweep intervals: adaptive sampling refines to that floor,
   while exact counts that imply fewer intervals reject. Pure revolveMesh supports one interval.
@@ -69,8 +69,8 @@ A closed indexed triangle mesh revolved counter-clockwise around +Z.
 
 ## Related APIs
 
+- [Path2Input](Path2Input.md)
 - [RevolveOptions](RevolveOptions.md)
 - [TriangleMesh](TriangleMesh.md)
-- [Vector2](Vector2.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/rotate2.md

@@ -0,0 +1,36 @@
+# rotate2
+
+Rotates a finite vector counter-clockwise in XY by `degrees` about the origin. Throws `NON_FINITE_VALUE` for nonfinite coordinates, angles, or derived coordinates.
+
+`const` **rotate2**: (`vector`: [`Vector2Tuple`](Vector2Tuple.md), `degrees`: `number`) => [`Vector2Tuple`](Vector2Tuple.md)
+
+
+
+## Parameters
+
+<a id="vector"></a>
+
+**`vector`** · [`Vector2Tuple`](Vector2Tuple.md) · Required
+
+
+
+<a id="degrees"></a>
+
+**`degrees`** · `number` · Required
+
+
+
+## Returns
+
+[`Vector2Tuple`](Vector2Tuple.md)
+
+
+## Related APIs
+
+- [Vector2Tuple](Vector2Tuple.md)
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/rotationTransform3.md

@@ -2,7 +2,7 @@
 
 Creates a right-handed axis-angle rotation transform.
 
-**rotationTransform3**(`axis`: [`Vector3`](Vector3.md), `angle`: [`AxisAngleRotation3`](AxisAngleRotation3.md), `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`Transform3`](Transform3.md)
+**rotationTransform3**(`axis`: [`Vector3Tuple`](Vector3Tuple.md), `angle`: [`AxisAngleRotation3`](AxisAngleRotation3.md), `tolerance?`: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)): [`Transform3Matrix`](Transform3Matrix.md)
 
 
 
@@ -10,7 +10,7 @@ Creates a right-handed axis-angle rotation transform.
 
 <a id="axis"></a>
 
-**`axis`** · [`Vector3`](Vector3.md) · Required
+**`axis`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
 
 Rotation axis; normalization is performed internally.
 
@@ -34,7 +34,7 @@ Optional zero-length comparison overrides.
 
 ## Returns
 
-[`Transform3`](Transform3.md)
+[`Transform3Matrix`](Transform3Matrix.md)
 
 A frozen row-major transform.
 
@@ -43,7 +43,11 @@ A frozen row-major transform.
 
 - [AxisAngleRotation3](AxisAngleRotation3.md)
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [Transform3](Transform3.md)
-- [Vector3](Vector3.md)
+- [Transform3Matrix](Transform3Matrix.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/roundClosedPolylinePath.md

@@ -2,7 +2,7 @@
 
 Replaces each vertex of a non-duplicated closed polyline with a sampled quadratic corner in the same coordinate system as the input.
 
-`const` **roundClosedPolylinePath**: (`points`: readonly [`Vector3`](Vector3.md)[], `radius`: `number`, `segmentsPerCorner`: `number`, `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>) => readonly [`Vector3`](Vector3.md)[]
+`const` **roundClosedPolylinePath**: (`input`: [`Path3Input`](Path3Input.md), `radius`: `number`, `segmentsPerCorner`: `number`, `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>) => readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 
 
 
@@ -10,12 +10,13 @@ Replaces each vertex of a non-duplicated closed polyline with a sampled quadrati
 45% of adjacent segment lengths to prevent neighboring corners from crossing.
 The returned path does not duplicate its closing point.
 Coordinates and radius must be finite; input and output are each limited by maxPathPoints (default 100000).
+Requires a closed path value; raw tuples are interpreted as closed. Invalid inputs throw GeometryError.
 
 ## Parameters
 
-<a id="points"></a>
+<a id="input"></a>
 
-**`points`** · readonly [`Vector3`](Vector3.md)[] · Required
+**`input`** · [`Path3Input`](Path3Input.md) · Required
 
 
 
@@ -39,12 +40,13 @@ Coordinates and radius must be finite; input and output are each limited by maxP
 
 ## Returns
 
-readonly [`Vector3`](Vector3.md)[]
+readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 
 
 ## Related APIs
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-- [Vector3](Vector3.md)
+- [Path3Input](Path3Input.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleContour.md

@@ -33,7 +33,7 @@ Closed contour in millimetres unless positive scales convert its coordinates.
 
 **`options`** · [`SampleContourOptions`](SampleContourOptions.md) · Optional
 
-Physical resolution and unique vertex budget; defaults to 4096 vertices.
+Physical resolution and unique vertex budget; defaults to min(4096, maxProfilePoints).
 
 - [`widthScale`](SampleContourOptions.md#widthscale) · `number` · Optional
 
@@ -47,7 +47,7 @@ Physical resolution and unique vertex budget; defaults to 4096 vertices.
 
   Physical policy evaluated after scaling, using the shared curve sampler.
 
-- [`maximumVertices`](SampleContourOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](SampleContourOptions.md#maxvertices) · `number` · Optional
 
   Unique output vertex ceiling, at least three, within maxProfilePoints. Defaults to min(4096, maxProfilePoints).
 
@@ -74,4 +74,4 @@ Frozen counterclockwise loop in millimetres, without a repeated seam endpoint.
 - [ContourCurve](ContourCurve.md)
 - [SampleContourOptions](SampleContourOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleCurve2.md

@@ -9,7 +9,7 @@ Samples a planar curve with the same guarantees and policy as spatial sampling.
 ## Example
 
 ```ts
-const turn = sampleCurve2({kind: "arc", center: [0,0], radius: 10, sweepDegrees: 90});
+const turn = sampleCurve2({kind: "arc", center: [0,0], radius: 10, sweepAngle: 90});
 ```
 
 ## Parameters
@@ -32,7 +32,7 @@ const turn = sampleCurve2({kind: "arc", center: [0,0], radius: 10, sweepDegrees:
 
   Millimetre sampling policy; circularSegments applies only to arcs.
 
-- [`maximumVertices`](CurveSamplingOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](CurveSamplingOptions.md#maxvertices) · `number` · Optional
 
   Output vertex ceiling of at least two; may only lower limits.maxPathPoints.
 
@@ -58,4 +58,4 @@ frozen. At stationary tangents, outgoing secants are preferred and endpoints use
 - [CurveSamplingOptions](CurveSamplingOptions.md)
 - [SampledCurve2](SampledCurve2.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleCurve3.md

@@ -32,7 +32,7 @@ const path = sampleCurve3({kind: "cubic", start: [0,0,0], control1: [5,0,0], con
 
   Millimetre sampling policy; circularSegments applies only to arcs.
 
-- [`maximumVertices`](CurveSamplingOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](CurveSamplingOptions.md#maxvertices) · `number` · Optional
 
   Output vertex ceiling of at least two; may only lower limits.maxPathPoints.
 
@@ -58,4 +58,4 @@ bound the full control hull. Full-circle arcs repeat their endpoint; closed poly
 - [CurveSamplingOptions](CurveSamplingOptions.md)
 - [SampledCurve3](SampledCurve3.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleCylindricalGearOutline.md

@@ -55,4 +55,4 @@ seam point, and contains no holes. Its center is the origin and its axis is
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleHelix.md

@@ -1,6 +1,6 @@
 # sampleHelix
 
-Creates `segments + 1` points including exact helix endpoints from finite positive dimensions. Integrated weights must remain finite. The maxPathPoints ceiling defaults to 100000; excessive exact counts reject before evaluating axial weights or allocating sample arrays.
+Creates `segments + 1` points including exact helix endpoints from finite positive dimensions. Integrated weights must remain finite. The maxPathPoints ceiling defaults to 100000; excessive exact counts reject before evaluating axial weights or allocating sample arrays. Invalid inputs use GeometryError; exceptions thrown by axialWeight propagate unchanged.
 
 `const` **sampleHelix**: (`{
   turns,
@@ -9,7 +9,7 @@ Creates `segments + 1` points including exact helix endpoints from finite positi
   segments,
   limits,
   axialWeight,
-}`: [`SampleHelixOptions`](SampleHelixOptions.md)) => readonly [`Vector3`](Vector3.md)[]
+}`: [`SampleHelixOptions`](SampleHelixOptions.md)) => readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 
 
 
@@ -30,12 +30,12 @@ Creates `segments + 1` points including exact helix endpoints from finite positi
 
 ## Returns
 
-readonly [`Vector3`](Vector3.md)[]
+readonly [`Vector3Tuple`](Vector3Tuple.md)[]
 
 
 ## Related APIs
 
 - [SampleHelixOptions](SampleHelixOptions.md)
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleInternalCylindricalGearSpaceOutline.md

@@ -56,4 +56,4 @@ when used as a region hole.
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleRackToothPath.md

@@ -2,7 +2,7 @@
 
 Samples the open top boundary of a finite rack in its XY pitch plane.
 
-**sampleRackToothPath**(`spec`: [`RackPitchSpec`](RackPitchSpec.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): [`Path2`](Path2.md)
+**sampleRackToothPath**(`spec`: [`RackPitchSpec`](RackPitchSpec.md), `limits?`: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>): [`Path2Data`](Path2Data.md)
 
 
 
@@ -27,13 +27,13 @@ the owning generator.
 
 ## Returns
 
-[`Path2`](Path2.md)
+[`Path2Data`](Path2Data.md)
 
 
 ## Related APIs
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-- [Path2](Path2.md)
+- [Path2Data](Path2Data.md)
 - [RackPitchSpec](RackPitchSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleSideProfile.md

@@ -2,7 +2,7 @@
 
 Samples 1–31 line/cubic segments into a deeply immutable open [radius,height] polyline. Anchors must progress strictly upward; nonnegative-radius cubic controls must have ordered heights between their endpoints. Cubics use de Casteljau subdivision with a conservative control-hull chord-error bound. Lines also obey the optional physical edge-length ceiling. Neither normalized coordinates nor editor metadata are required. Endpoints are retained once; no axis closure, winding normalization, or manufacturing repair is performed.
 
-**sampleSideProfile**(`curve`: [`SideProfileCurve`](SideProfileCurve.md), `options?`: [`SampleSideProfileOptions`](SampleSideProfileOptions.md)): readonly [`Vector2`](Vector2.md)[]
+**sampleSideProfile**(`curve`: [`SideProfileCurve`](SideProfileCurve.md), `options?`: [`SampleSideProfileOptions`](SampleSideProfileOptions.md)): readonly [`Vector2Tuple`](Vector2Tuple.md)[]
 
 
 
@@ -29,7 +29,7 @@ Open outline in millimetres unless the positive scales convert its coordinates.
 
 **`options`** · [`SampleSideProfileOptions`](SampleSideProfileOptions.md) · Optional
 
-Physical resolution and output budget; defaults to 4096 vertices.
+Physical resolution and output budget; defaults to min(4096, maxProfilePoints).
 
 - [`radiusScale`](SampleSideProfileOptions.md#radiusscale) · `number` · Optional
 
@@ -43,7 +43,7 @@ Physical resolution and output budget; defaults to 4096 vertices.
 
   Shared physical policy, evaluated after scaling; exact circular counts do not affect curves.
 
-- [`maximumVertices`](SampleSideProfileOptions.md#maximumvertices) · `number` · Optional
+- [`maxVertices`](SampleSideProfileOptions.md#maxvertices) · `number` · Optional
 
   Maximum output vertex count within maxProfilePoints. Defaults to the smaller of 4096 and that ceiling.
 
@@ -55,7 +55,7 @@ Physical resolution and output budget; defaults to 4096 vertices.
 
 ## Returns
 
-readonly [`Vector2`](Vector2.md)[]
+readonly [`Vector2Tuple`](Vector2Tuple.md)[]
 
 Frozen open polyline in millimetres, ordered from lowest to highest anchor.
 
@@ -68,6 +68,6 @@ Frozen open polyline in millimetres, ordered from lowest to highest anchor.
 
 - [SampleSideProfileOptions](SampleSideProfileOptions.md)
 - [SideProfileCurve](SideProfileCurve.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleTextContours.md

@@ -50,4 +50,4 @@ Frozen contours with original glyph winding and no repeated closing vertex.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [VectorTextLayout](VectorTextLayout.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/sampleThreadHelices.md

@@ -32,7 +32,7 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 
   Explicit aggregate path allocation ceilings across all starts.
 
-- [`phaseDegrees`](ThreadHelixOptions.md#phasedegrees) · `number` · Optional
+- [`phase`](ThreadHelixOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
@@ -60,4 +60,4 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 - [SampledThreadHelices](SampledThreadHelices.md)
 - [ThreadHelixOptions](ThreadHelixOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/scale2.md

@@ -0,0 +1,36 @@
+# scale2
+
+Multiplies a vector by a dimensionless scalar.
+
+`const` **scale2**: (`vector`: [`Vector2Tuple`](Vector2Tuple.md), `scale`: `number`) => [`Vector2Tuple`](Vector2Tuple.md)
+
+
+
+## Parameters
+
+<a id="vector"></a>
+
+**`vector`** · [`Vector2Tuple`](Vector2Tuple.md) · Required
+
+
+
+<a id="scale"></a>
+
+**`scale`** · `number` · Required
+
+
+
+## Returns
+
+[`Vector2Tuple`](Vector2Tuple.md)
+
+
+## Related APIs
+
+- [Vector2Tuple](Vector2Tuple.md)
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/scale3.md

@@ -2,7 +2,7 @@
 
 Multiplies a vector by a dimensionless scalar.
 
-`const` **scale3**: (`vector`: [`Vector3`](Vector3.md), `scale`: `number`) => [`Vector3`](Vector3.md)
+`const` **scale3**: (`vector`: [`Vector3Tuple`](Vector3Tuple.md), `scale`: `number`) => [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -16,7 +16,7 @@ scale3([1, 2, 3], 2); // [2, 4, 6]
 
 <a id="vector"></a>
 
-**`vector`** · [`Vector3`](Vector3.md) · Required
+**`vector`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
 
 
 
@@ -28,11 +28,15 @@ scale3([1, 2, 3], 2); // [2, 4, 6]
 
 ## Returns
 
-[`Vector3`](Vector3.md)
+[`Vector3Tuple`](Vector3Tuple.md)
 
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/scaleTransform3.md

@@ -2,7 +2,7 @@
 
 Creates an immutable axis-aligned scale transform.
 
-**scaleTransform3**(`factors`: [`Vector3`](Vector3.md)): [`Transform3`](Transform3.md)
+**scaleTransform3**(`factors`: [`Vector3Tuple`](Vector3Tuple.md)): [`Transform3Matrix`](Transform3Matrix.md)
 
 
 
@@ -13,7 +13,7 @@ they collapse volume and cannot be inverted.
 
 <a id="factors"></a>
 
-**`factors`** · [`Vector3`](Vector3.md) · Required
+**`factors`** · [`Vector3Tuple`](Vector3Tuple.md) · Required
 
 Finite, non-zero XYZ scale factors.
 
@@ -21,14 +21,18 @@ Finite, non-zero XYZ scale factors.
 
 ## Returns
 
-[`Transform3`](Transform3.md)
+[`Transform3Matrix`](Transform3Matrix.md)
 
 A frozen row-major transform.
 
 
 ## Related APIs
 
-- [Transform3](Transform3.md)
-- [Vector3](Vector3.md)
+- [Transform3Matrix](Transform3Matrix.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.15.0`.

package/dist/docs/reference/geometry/signedContourArea.md

@@ -23,4 +23,4 @@ Returns the signed area of a non-duplicated loop; positive means CCW.
 
 - [Contour](Contour.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.15.0`.