@hybridlabor-api/bdb-hardware-pcb 0.1.0

package/mcp_servers/kicad-mcp-server/tests/__init__.py

@@ -0,0 +1 @@
+"""Tests for KiCad MCP Server."""

package/mcp_servers/kicad-mcp-server/tests/examples/ESP32S3_TEST.md

@@ -0,0 +1,219 @@
+# ESP32S3 Development Board Test Example
+
+This document demonstrates how to use the KiCad MCP Server to create a complete ESP32S3 development board schematic with peripherals and generate Arduino test code.
+
+## Project Description
+
+Create an ESP32S3 development board with:
+- **MCU**: ESP32S3-WROOM-1 module
+- **Display**: SSD1306 I2C OLED (128x32)
+- **Input**: Push button with pull-up resistor
+- **Output**: LED with current limiting resistor
+
+## Generated Files
+
+### 1. Schematic File (`esp32s3_devboard.kicad_sch`)
+
+KiCad schematic file with the following components:
+
+| Reference | Component | Value | Footprint |
+|-----------|-----------|-------|-----------|
+| U1 | ESP32 Module | ESP32S3-WROOM-1 | Module:ESP32S3-WROOM-1-N16R8 |
+| U2 | OLED Display | SSD1306 | Display:OLED-0.91-128x32 |
+| SW1 | Push Button | BUTTON | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm |
+| D1 | LED | LED_RED | LED_SMD:LED_0805_2012Metric |
+| R1 | Resistor | 1k | Resistor_SMD:R_0805_2012Metric |
+| R2 | Resistor | 10k | Resistor_SMD:R_0805_2012Metric |
+
+### 2. Arduino Test Code (`esp32s3_test.ino`)
+
+Complete Arduino test firmware with:
+
+#### Features
+- **LED Test**: Blinks LED 3 times on startup
+- **Button Test**: Detects button presses with debounce
+- **I2C Scan**: Scans I2C bus and detects OLED display
+- **OLED Display**: Shows test status and button press count
+- **Serial Output**: 115200 baud debug output
+
+#### Pin Configuration
+```
+BUTTON_PIN = GPIO0 (internal pull-up)
+LED_PIN    = GPIO2
+I2C_SDA    = GPIO6
+I2C_SCL    = GPIO7
+```
+
+#### Test Sequence
+1. Initialize serial communication
+2. Configure GPIO pins
+3. Initialize I2C bus
+4. Initialize OLED display
+5. Run LED blink test
+6. Run button input test
+7. Scan I2C bus for devices
+8. Enter interactive mode:
+   - Press button to toggle LED
+   - Update display with test count
+   - Serial output of each action
+
+#### Required Libraries
+```cpp
+#include <Wire.h>
+#include <Adafruit_GFX.h>
+#include <Adafruit_SSD1306.h>
+```
+
+Install via Arduino IDE Library Manager:
+- Adafruit GFX Library
+- Adafruit SSD1306
+
+#### Hardware Connections
+```
+ESP32S3-WROOM-1:
+  GPIO6 → OLED SDA
+  GPIO7 → OLED SCL
+  GPIO0 → SW1 (Button)
+  GPIO2 → R1 → D1 (LED) → GND
+  +3V3  → OLED VDD, R2, R1
+  GND   → OLED GND, SW1, D1 cathode
+```
+
+## Usage Instructions
+
+### 1. Setup Arduino IDE
+
+```bash
+# Install Arduino IDE 2.0
+# Add ESP32 board support
+# Tools > Board > Boards Manager > Search "ESP32" > Install
+```
+
+### 2. Configure Board
+
+```
+Tools > Board > esp32 > ESP32S3 Dev Module
+Tools > Upload Speed: 921600
+Tools > USB Mode: Hardware CDC and JTAG
+Tools > Port: (Select your ESP32S3 board)
+```
+
+### 3. Install Required Libraries
+
+```
+Sketch > Include Library > Manage Libraries
+Search: "Adafruit GFX" → Install
+Search: "Adafruit SSD1306" → Install
+```
+
+### 4. Upload Code
+
+1. Open `esp32s3_test.ino` in Arduino IDE
+2. Verify/Compile the code (✓ button)
+3. Upload to ESP32S3
+4. Open Serial Monitor (115200 baud)
+
+### 5. Expected Output
+
+```
+===============================================
+ESP32S3 Dev Board - Arduino Test Suite
+===============================================
+
+✅ Pins initialized:
+  Button: GPIO0
+  LED:    GPIO2
+
+✅ I2C initialized:
+  SDA: GPIO6
+  SCL: GPIO7
+
+✅ OLED display initialized (0x3C)
+
+Display test pattern shown on OLED
+
+Running initial tests...
+
+Test: LED Blink
+  Blink 1
+  Blink 2
+  Blink 3
+✅ LED test passed
+
+Test: Button Input
+  Initial state: HIGH
+  Waiting for button press...
+✅ Button test ready
+
+Test: I2C Bus Scan
+  Scanning I2C bus...
+  I2C device found at 0x3C
+  1 device(s) found
+✅ I2C scan complete
+
+===============================================
+Initialization complete!
+Ready for interactive testing
+===============================================
+```
+
+### 6. Interactive Testing
+
+Press the button to:
+- Toggle LED on/off
+- Increment test counter
+- Update OLED display
+- Log to serial monitor
+
+OLED will show:
+```
+ESP32S3 Test
+Count: 5
+LED: ON
+Btn: PRESSED
+```
+
+## Troubleshooting
+
+### OLED not detected
+- Check I2C connections (SDA/SCL)
+- Verify I2C address (default 0x3C)
+- Try scanning I2C bus with different addresses
+
+### Button not working
+- Verify GPIO0 is properly connected
+- Check internal pull-up is enabled
+- Test with external pull-up resistor (10k)
+
+### LED not lighting
+- Verify LED orientation (anode to MCU)
+- Check current limiting resistor (1k to GND)
+- Test LED with multimeter
+
+### Upload fails
+- Press BOOT button when uploading
+- Check USB driver installation
+- Try lower upload speed (460800)
+
+## Example Output Video
+
+Expected behavior:
+1. Power on → OLED displays "ESP32S3 Test"
+2. LED blinks 3 times
+3. Serial monitor shows test sequence
+4. Press button → LED toggles
+5. OLED updates with count
+
+## Extensions
+
+Possible enhancements:
+- Add WiFi/Bluetooth connectivity tests
+- PWM output to LED for brightness control
+- ADC input for analog sensors
+- SPI flash memory test
+- Deep sleep mode test
+- OTA firmware update
+
+## License
+
+This test code is part of the KiCad MCP Server project.

package/mcp_servers/kicad-mcp-server/tests/fixtures/README.md

@@ -0,0 +1,65 @@
+# Test Fixtures for KiCad MCP Server
+
+This directory contains test fixture files for testing the MCP server tools.
+
+## Fixture Categories
+
+### Validation Test Fixtures
+- `erc_violations.kicad_sch` - Schematic with intentional ERC violations
+- `drc_violations.kicad_pcb` - PCB with intentional DRC violations
+- `clean_design.kicad_sch` - Clean schematic with no violations
+- `clean_design.kicad_pcb` - Clean PCB with no violations
+
+### Pin Analysis Test Fixtures
+- `stm32_board.kicad_sch` - STM32-based board for pin analysis
+- `esp32_board.kicad_sch` - ESP32-based board for pin analysis
+- `pin_conflicts.kicad_sch` - Schematic with pin conflicts
+
+### Device Tree Test Fixtures
+- `stm32f4_project/` - Complete STM32F4 project for device tree generation
+- `esp32_project/` - Complete ESP32 project for device tree generation
+- `complex_peripherals.kicad_sch` - Schematic with multiple I2C/SPI devices
+
+### Test Generation Test Fixtures
+- `gpio_test_board.kicad_sch` - Board for GPIO test generation
+- `i2c_sensors.kicad_sch` - Board with multiple I2C sensors
+- `spi_devices.kicad_sch` - Board with multiple SPI devices
+
+## Fixture Creation Guidelines
+
+### ERC Violation Fixture
+Create schematic with:
+- Unconnected input pins
+- Multiple outputs on same net
+- Power-to-power connections
+- Pin type mismatches
+
+### DRC Violation Fixture
+Create PCB with:
+- Clearance violations (< 0.15mm)
+- Missing connections
+- Pad/footprint overlaps
+- Board edge constraints
+
+### Device Tree Fixture
+Create project with:
+- MCU component (STM32/ESP32/etc.)
+- I2C devices with proper naming
+- SPI devices with chip selects
+- GPIO pins with named nets
+- Power management components
+
+## Usage
+
+```python
+# Example test using fixtures
+def test_run_erc_with_violations():
+    result = await run_erc("tests/fixtures/erc_violations.kicad_sch")
+    assert "❌ ERC violation detected" in result
+    assert "unconnected pin" in result.lower()
+```
+
+## Note
+
+These fixtures should be created using actual KiCad 9.0 to ensure compatibility.
+For now, this directory serves as a placeholder for future fixture creation.

package/mcp_servers/kicad-mcp-server/tests/fixtures/__init__.py

@@ -0,0 +1 @@
+"""Test fixtures for KiCad MCP Server."""

package/mcp_servers/kicad-mcp-server/tests/fixtures/example_pcb.kicad_pcb

@@ -0,0 +1,177 @@
+(kicad_pcb (version 20171130) (host pcbnew 5.1.0)
+
+  (general
+    (thickness 1.6)
+    (drawings 0)
+    (tracks 0)
+    (vias 0)
+    (zones 0)
+    (modules 4)
+    (nets 3)
+  )
+
+  (page A4)
+  (layers
+    (0 F.Cu signal)
+    (31 B.Cu signal)
+    (32 B.Adhes user)
+    (33 F.Adhes user)
+    (34 B.Paste user)
+    (35 F.Paste user)
+    (36 B.SilkS user)
+    (37 F.SilkS user)
+    (38 B.Mask user)
+    (39 F.Mask user)
+    (40 Dwgs.User user)
+    (41 Cmts.User user)
+    (42 Eco1.User user)
+    (43 Eco2.User user)
+    (44 Edge.Cuts user)
+    (45 Margin user)
+    (46 B.CrtYd user)
+    (47 F.CrtYd user)
+    (48 B.Fab user)
+    (49 F.Fab user)
+  )
+
+  (setup
+    (last_trace_width 0.25)
+    (trace_clearance 0.2)
+    (zone_clearance 0.508)
+    (zone_45_only no)
+    (trace_min 0.2)
+    (via_size 0.8)
+    (via_drill 0.4)
+    (via_min_size 0.4)
+    (via_min_drill 0.3)
+    (uvia_size 0.3)
+    (uvia_drill 0.1)
+    (uvias_allowed no)
+    (uvia_min_size 0.2)
+    (uvia_min_drill 0.1)
+    (edge_width 0.05)
+    (segment_width 0.2)
+    (pcb_text_width 0.3)
+    (pcb_text_size 1.5 1.5)
+    (mod_edge_width 0.12)
+    (mod_text_size 1 1)
+    (mod_text_width 0.15)
+    (pad_size 1.524 1.524)
+    (pad_drill 0.762)
+    (pad_to_mask_clearance 0.05)
+    (aux_axis_origin 0 0)
+    (visible_elements FFFFFF7F)
+    (pcbplotparams
+      (layerselection 0x010fc_ffffffff)
+      (usegerberextensions false)
+      (usegerberattributes false)
+      (usegerberadvancedattributes false)
+      (creategerberjobfile false)
+      (excludeedgelayer true)
+      (linewidth 0.100000)
+      (plotframeref false)
+      (viasonmask false)
+      (mode 1)
+      (useauxorigin false)
+      (hpglpennumber 1)
+      (hpglpenspeed 20)
+      (hpglpendiameter 15.000000)
+      (psnegative false)
+      (psa4output false)
+      (plotreference true)
+      (plotvalue true)
+      (plotinvisibletext false)
+      (padsonsilk false)
+      (subtractmaskfromsilk false)
+      (outputformat 1)
+      (mirror false)
+      (drillshape 1)
+      (scaleselection 1)
+      (outputdirectory ""))
+  )
+
+  (net 0 "")
+  (net 1 "GND")
+  (net 2 "+3V3")
+
+  (net_class Default "This is the default net class."
+    (clearance 0.2)
+    (trace_width 0.25)
+    (via_dia 0.8)
+    (via_drill 0.4)
+    (uvia_dia 0.3)
+    (uvia_drill 0.1)
+  )
+
+  (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5ABCDEF0)
+    (at 100 100)
+    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal")
+    (tags resistor)
+    (path 12345678-1234-1234-1234-123456789abc)
+    (attr smd)
+    (fp_text reference R1 (at 0 -1.65) (layer F.SilkS)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (fp_text value 10k (at 0 1.65) (layer F.Fab)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (pad 1 smd rect (at -0.95 0) (size 1.2 1.5) (layers F.Cu F.Paste F.Mask)
+      (net 1))
+    (pad 2 smd rect (at 0.95 0) (size 1.2 1.5) (layers F.Cu F.Paste F.Mask)
+      (net 2))
+  )
+
+  (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5ABCDEF1)
+    (at 150 100)
+    (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal")
+    (tags resistor)
+    (path 12345678-1234-1234-1234-123456789abd)
+    (attr smd)
+    (fp_text reference R2 (at 0 -1.65) (layer F.SilkS)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (fp_text value 4.7k (at 0 1.65) (layer F.Fab)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (pad 1 smd rect (at -0.95 0) (size 1.2 1.5) (layers F.Cu F.Paste F.Mask)
+      (net 2))
+    (pad 2 smd rect (at 0.95 0) (size 1.2 1.5) (layers F.Cu F.Paste F.Mask)
+      (net 1))
+  )
+
+  (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5ABCDEF2)
+    (at 100 150)
+    (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal")
+    (tags capacitor)
+    (path 12345678-1234-1234-1234-123456789abe)
+    (attr smd)
+    (fp_text reference C1 (at 0 -1.65) (layer F.SilkS)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (fp_text value 100nF (at 0 1.65) (layer F.Fab)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (pad 1 smd rect (at -0.95 0) (size 1.2 1.5) (layers F.Cu F.Paste F.Mask)
+      (net 2))
+    (pad 2 smd rect (at 0.95 0) (size 1.2 1.5) (layers F.Cu F.Paste F.Mask)
+      (net 1))
+  )
+
+  (module Module:ESP32-WROOM-32 (layer F.Cu) (tedit 5A030DC3) (tstamp 5ABCDEF3)
+    (at 200 150)
+    (descr "RF Module, ESP32-WROOM-32, http://www.espressif.com/sites/default/files/documentation/0a-esp32-wroom-32_datasheet_en.pdf")
+    (tags "ESP Wi-Fi Bluetooth")
+    (path 12345678-1234-1234-1234-123456789abf)
+    (attr smd)
+    (fp_text reference U1 (at 0 -12.7) (layer F.SilkS)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (fp_text value ESP32-WROOM-32 (at 0 12.7) (layer F.Fab)
+      (effects (font (size 1 1) (thickness 0.15)))
+    )
+    (pad 1 smd rect (at -8 6) (size 2 1) (layers F.Cu F.Paste F.Mask)
+      (net 1))
+    (pad 2 smd rect (at -8 4) (size 2 1) (layers F.Cu F.Paste F.Mask)
+      (net 2))
+  )
+)

package/mcp_servers/kicad-mcp-server/tests/fixtures/example_schematic.kicad_sch

@@ -0,0 +1,145 @@
+(kicad_sch (version 20211123) (generator eeschema)
+
+  (paper "A4")
+  (title_block
+    (title "Example Project")
+    (company "Test Company")
+    (date "2025-01-25")
+    (rev "1.0")
+  )
+
+  (lib_symbols
+  )
+
+  (polyline (pts (xy 50 100) (xy 150 100)))
+
+  (symbol (lib_id "Device:R") (at 100 100 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid 12345678-1234-1234-1234-123456789abc)
+    (property "Reference" "R1" (at 95 95 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "10k" (at 95 105 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Resistor_SMD:R_0805_2012Metric" (at 100 100 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 11111111-1111-1111-1111-111111111111))
+    (pin "2" (uuid 22222222-2222-2222-2222-222222222222))
+  )
+
+  (symbol (lib_id "Device:R") (at 150 100 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid 12345678-1234-1234-1234-123456789abd)
+    (property "Reference" "R2" (at 145 95 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "4.7k" (at 145 105 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "" (at 150 100 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 33333333-3333-3333-3333-333333333333))
+    (pin "2" (uuid 44444444-4444-4444-4444-444444444444))
+  )
+
+  (symbol (lib_id "Device:C") (at 100 150 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid 12345678-1234-1234-1234-123456789abe)
+    (property "Reference" "C1" (at 95 145 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "100nF" (at 95 155 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Capacitor_SMD:C_0805_2012Metric" (at 100 150 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 55555555-5555-5555-5555-555555555555))
+    (pin "2" (uuid 66666666-6666-6666-6666-666666666666))
+  )
+
+  (symbol (lib_id "MCU_Module:ESP32_WROOM") (at 200 150 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid 12345678-1234-1234-1234-123456789abf)
+    (property "Reference" "U1" (at 195 145 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "ESP32-WROOM-32" (at 195 155 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Module:ESP32-WROOM-32" (at 200 150 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 77777777-7777-7777-7777-777777777777))
+    (pin "2" (uuid 88888888-8888-8888-8888-888888888888))
+  )
+
+  (symbol (lib_id "Connector:Conn_01x04_Pin") (at 250 100 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid 12345678-1234-1234-1234-123456789ac0)
+    (property "Reference" "J1" (at 245 95 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "Conn_01x04" (at 245 105 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" (at 250 100 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 99999999-9999-9999-9999-999999999999))
+    (pin "2" (uuid aaaaaaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa))
+    (pin "3" (uuid bbbbbbbb-bbbb-bbbb-bbbb-bbbbbbbbbbbb))
+    (pin "4" (uuid cccccccc-cccc-cccc-cccc-cccccccccccc))
+  )
+
+  (symbol (lib_id "Device:R") (at 300 100 0) (unit 1)
+    (exclude_from_sim no) (in_bom no) (on_board yes) (dnp yes)
+    (uuid 12345678-1234-1234-1234-123456789ac1)
+    (property "Reference" "R3" (at 295 95 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "0R" (at 295 105 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Resistor_SMD:R_0402_1005Metric" (at 300 100 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid dddddddd-dddd-dddd-dddd-dddddddddddd))
+    (pin "2" (uuid eeeeeeee-eeee-eeee-eeee-eeeeeeeeeeee))
+  )
+
+  (global_label "SPI_CLK" (shape input) (at 120 90 0) (fields_autoplaced yes)
+    (effects (font (size 1.27 1.27)) (justify left))
+    (uuid ffffffff-ffff-ffff-ffff-ffffffffffff)
+  )
+
+  (label "+3V3" (at 140 100 0) (fields_autoplaced yes)
+    (effects (font (size 1.27 1.27)) (justify left))
+    (uuid dddddddd-dddd-dddd-dddd-ffffffffffff)
+  )
+
+  (hierarchical_label "SDA" (shape bidirectional) (at 160 90 0)
+    (effects (font (size 1.27 1.27)) (justify left))
+    (uuid aaaaaaaa-aaaa-aaaa-aaaa-ffffffffffff)
+  )
+
+  (hierarchical_label "SCL" (shape bidirectional) (at 160 95 0)
+    (effects (font (size 1.27 1.27)) (justify left))
+    (uuid bbbbbbbb-bbbb-bbbb-bbbb-ffffffffffff)
+  )
+
+  (symbol (lib_id "power:GND") (at 100 120 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid cccccccc-cccc-cccc-cccc-ffffffffffff)
+    (property "Reference" "#PWR01" (at 100 126.35 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Value" "GND" (at 100 123.81 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (pin "1" (uuid bbbbbbbb-bbbb-bbbb-bbbb-ffffffffffff))
+  )
+)

package/mcp_servers/kicad-mcp-server/tests/fixtures/hier/child.kicad_sch

@@ -0,0 +1,24 @@
+(kicad_sch (version 20231120) (generator eeschema)
+
+  (paper "A4")
+
+  (lib_symbols
+  )
+
+  (symbol (lib_id "Device:C") (at 80 80 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid bbbbbbbb-0000-0000-0000-000000000002)
+    (property "Reference" "C9" (at 75 75 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "100nF" (at 75 85 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Capacitor_SMD:C_0603_1608Metric" (at 80 80 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 33333333-0000-0000-0000-333333333333))
+    (pin "2" (uuid 44444444-0000-0000-0000-444444444444))
+  )
+
+)

package/mcp_servers/kicad-mcp-server/tests/fixtures/hier/root.kicad_sch

@@ -0,0 +1,38 @@
+(kicad_sch (version 20231120) (generator eeschema)
+
+  (paper "A4")
+
+  (lib_symbols
+  )
+
+  (symbol (lib_id "Device:R") (at 100 100 0) (unit 1)
+    (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no)
+    (uuid aaaaaaaa-0000-0000-0000-000000000001)
+    (property "Reference" "R1" (at 95 95 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "10k" (at 95 105 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Resistor_SMD:R_0805_2012Metric" (at 100 100 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (pin "1" (uuid 11111111-0000-0000-0000-111111111111))
+    (pin "2" (uuid 22222222-0000-0000-0000-222222222222))
+  )
+
+  (sheet
+    (at 150 50)
+    (size 30 20)
+    (property "Sheetname" "Power")
+    (property "Sheetfile" "child.kicad_sch")
+  )
+
+  (sheet
+    (at 150 100)
+    (size 30 20)
+    (property "Sheetname" "Ghost")
+    (property "Sheetfile" "missing.kicad_sch")
+  )
+
+)

package/mcp_servers/kicad-mcp-server/tests/test_tools/__init__.py

@@ -0,0 +1 @@
+"""Test package for tools."""