@eosrio/node-abieos 2.1.0-beta.0 → 2.2.0

package/external/rapidjson/doc/schema.md

@@ -1,505 +0,0 @@
-# Schema
-
-(This feature was released in v1.1.0)
-
-JSON Schema is a draft standard for describing the format of JSON data. The schema itself is also JSON data. By validating a JSON structure with JSON Schema, your code can safely access the DOM without manually checking types, or whether a key exists, etc. It can also ensure that the serialized JSON conform to a specified schema.
-
-RapidJSON implemented a JSON Schema validator for [JSON Schema Draft v4](http://json-schema.org/documentation.html). If you are not familiar with JSON Schema, you may refer to [Understanding JSON Schema](http://spacetelescope.github.io/understanding-json-schema/).
-
-[TOC]
-
-# Basic Usage {#Basic}
-
-First of all, you need to parse a JSON Schema into `Document`, and then compile the `Document` into a `SchemaDocument`.
-
-Secondly, construct a `SchemaValidator` with the `SchemaDocument`. It is similar to a `Writer` in the sense of handling SAX events. So, you can use `document.Accept(validator)` to validate a document, and then check the validity.
-
-~~~cpp
-#include "rapidjson/schema.h"
-
-// ...
-
-Document sd;
-if (sd.Parse(schemaJson).HasParseError()) {
-    // the schema is not a valid JSON.
-    // ...       
-}
-SchemaDocument schema(sd); // Compile a Document to SchemaDocument
-// sd is no longer needed here.
-
-Document d;
-if (d.Parse(inputJson).HasParseError()) {
-    // the input is not a valid JSON.
-    // ...       
-}
-
-SchemaValidator validator(schema);
-if (!d.Accept(validator)) {
-    // Input JSON is invalid according to the schema
-    // Output diagnostic information
-    StringBuffer sb;
-    validator.GetInvalidSchemaPointer().StringifyUriFragment(sb);
-    printf("Invalid schema: %s\n", sb.GetString());
-    printf("Invalid keyword: %s\n", validator.GetInvalidSchemaKeyword());
-    sb.Clear();
-    validator.GetInvalidDocumentPointer().StringifyUriFragment(sb);
-    printf("Invalid document: %s\n", sb.GetString());
-}
-~~~
-
-Some notes:
-
-* One `SchemaDocument` can be referenced by multiple `SchemaValidator`s. It will not be modified by `SchemaValidator`s.
-* A `SchemaValidator` may be reused to validate multiple documents. To run it for other documents, call `validator.Reset()` first.
-
-# Validation during parsing/serialization {#Fused}
-
-Unlike most JSON Schema validator implementations, RapidJSON provides a SAX-based schema validator. Therefore, you can parse a JSON from a stream while validating it on the fly. If the validator encounters a JSON value that invalidates the supplied schema, the parsing will be terminated immediately. This design is especially useful for parsing large JSON files.
-
-## DOM parsing {#DOM}
-
-For using DOM in parsing, `Document` needs some preparation and finalizing tasks, in addition to receiving SAX events, thus it needs some work to route the reader, validator and the document. `SchemaValidatingReader` is a helper class that doing such work.
-
-~~~cpp
-#include "rapidjson/filereadstream.h"
-
-// ...
-SchemaDocument schema(sd); // Compile a Document to SchemaDocument
-
-// Use reader to parse the JSON
-FILE* fp = fopen("big.json", "r");
-FileReadStream is(fp, buffer, sizeof(buffer));
-
-// Parse JSON from reader, validate the SAX events, and store in d.
-Document d;
-SchemaValidatingReader<kParseDefaultFlags, FileReadStream, UTF8<> > reader(is, schema);
-d.Populate(reader);
-
-if (!reader.GetParseResult()) {
-    // Not a valid JSON
-    // When reader.GetParseResult().Code() == kParseErrorTermination,
-    // it may be terminated by:
-    // (1) the validator found that the JSON is invalid according to schema; or
-    // (2) the input stream has I/O error.
-
-    // Check the validation result
-    if (!reader.IsValid()) {
-        // Input JSON is invalid according to the schema
-        // Output diagnostic information
-        StringBuffer sb;
-        reader.GetInvalidSchemaPointer().StringifyUriFragment(sb);
-        printf("Invalid schema: %s\n", sb.GetString());
-        printf("Invalid keyword: %s\n", reader.GetInvalidSchemaKeyword());
-        sb.Clear();
-        reader.GetInvalidDocumentPointer().StringifyUriFragment(sb);
-        printf("Invalid document: %s\n", sb.GetString());
-    }
-}
-~~~
-
-## SAX parsing {#SAX}
-
-For using SAX in parsing, it is much simpler. If it only need to validate the JSON without further processing, it is simply:
-
-~~~
-SchemaValidator validator(schema);
-Reader reader;
-if (!reader.Parse(stream, validator)) {
-    if (!validator.IsValid()) {
-        // ...    
-    }
-}
-~~~
-
-This is exactly the method used in the [schemavalidator](example/schemavalidator/schemavalidator.cpp) example. The distinct advantage is low memory usage, no matter how big the JSON was (the memory usage depends on the complexity of the schema).
-
-If you need to handle the SAX events further, then you need to use the template class `GenericSchemaValidator` to set the output handler of the validator:
-
-~~~
-MyHandler handler;
-GenericSchemaValidator<SchemaDocument, MyHandler> validator(schema, handler);
-Reader reader;
-if (!reader.Parse(ss, validator)) {
-    if (!validator.IsValid()) {
-        // ...    
-    }
-}
-~~~
-
-## Serialization {#Serialization}
-
-It is also possible to do validation during serializing. This can ensure the result JSON is valid according to the JSON schema.
-
-~~~
-StringBuffer sb;
-Writer<StringBuffer> writer(sb);
-GenericSchemaValidator<SchemaDocument, Writer<StringBuffer> > validator(s, writer);
-if (!d.Accept(validator)) {
-    // Some problem during Accept(), it may be validation or encoding issues.
-    if (!validator.IsValid()) {
-        // ...
-    }
-}
-~~~
-
-Of course, if your application only needs SAX-style serialization, it can simply send SAX events to `SchemaValidator` instead of `Writer`.
-
-# Remote Schema {#Remote}
-
-JSON Schema supports [`$ref` keyword](http://spacetelescope.github.io/understanding-json-schema/structuring.html), which is a [JSON pointer](doc/pointer.md) referencing to a local or remote schema. Local pointer is prefixed with `#`, while remote pointer is an relative or absolute URI. For example:
-
-~~~js
-{ "$ref": "definitions.json#/address" }
-~~~
-
-As `SchemaDocument` does not know how to resolve such URI, it needs a user-provided `IRemoteSchemaDocumentProvider` instance to do so.
-
-~~~
-class MyRemoteSchemaDocumentProvider : public IRemoteSchemaDocumentProvider {
-public:
-    virtual const SchemaDocument* GetRemoteDocument(const char* uri, SizeType length) {
-        // Resolve the uri and returns a pointer to that schema.
-    }
-};
-
-// ...
-
-MyRemoteSchemaDocumentProvider provider;
-SchemaDocument schema(sd, &provider);
-~~~
-
-# Conformance {#Conformance}
-
-RapidJSON passed 262 out of 263 tests in [JSON Schema Test Suite](https://github.com/json-schema/JSON-Schema-Test-Suite) (Json Schema draft 4).
-
-The failed test is "changed scope ref invalid" of "change resolution scope" in `refRemote.json`. It is due to that `id` schema keyword and URI combining function are not implemented.
-
-Besides, the `format` schema keyword for string values is ignored, since it is not required by the specification.
-
-## Regular Expression {#Regex}
-
-The schema keyword `pattern` and `patternProperties` uses regular expression to match the required pattern.
-
-RapidJSON implemented a simple NFA regular expression engine, which is used by default. It supports the following syntax.
-
-|Syntax|Description|
-|------|-----------|
-|`ab`    | Concatenation |
-|<code>a&#124;b</code>   | Alternation |
-|`a?`    | Zero or one |
-|`a*`    | Zero or more |
-|`a+`    | One or more |
-|`a{3}`  | Exactly 3 times |
-|`a{3,}` | At least 3 times |
-|`a{3,5}`| 3 to 5 times |
-|`(ab)`  | Grouping |
-|`^a`    | At the beginning |
-|`a$`    | At the end |
-|`.`     | Any character |
-|`[abc]` | Character classes |
-|`[a-c]` | Character class range |
-|`[a-z0-9_]` | Character class combination |
-|`[^abc]` | Negated character classes |
-|`[^a-c]` | Negated character class range |
-|`[\b]`   | Backspace (U+0008) |
-|<code>\\&#124;</code>, `\\`, ...  | Escape characters |
-|`\f` | Form feed (U+000C) |
-|`\n` | Line feed (U+000A) |
-|`\r` | Carriage return (U+000D) |
-|`\t` | Tab (U+0009) |
-|`\v` | Vertical tab (U+000B) |
-
-For C++11 compiler, it is also possible to use the `std::regex` by defining `RAPIDJSON_SCHEMA_USE_INTERNALREGEX=0` and `RAPIDJSON_SCHEMA_USE_STDREGEX=1`. If your schemas do not need `pattern` and `patternProperties`, you can set both macros to zero to disable this feature, which will reduce some code size.
-
-# Performance {#Performance}
-
-Most C++ JSON libraries do not yet support JSON Schema. So we tried to evaluate the performance of RapidJSON's JSON Schema validator according to [json-schema-benchmark](https://github.com/ebdrup/json-schema-benchmark), which tests 11 JavaScript libraries running on Node.js.
-
-That benchmark runs validations on [JSON Schema Test Suite](https://github.com/json-schema/JSON-Schema-Test-Suite), in which some test suites and tests are excluded. We made the same benchmarking procedure in [`schematest.cpp`](test/perftest/schematest.cpp).
-
-On a Mac Book Pro (2.8 GHz Intel Core i7), the following results are collected.
-
-|Validator|Relative speed|Number of test runs per second|
-|---------|:------------:|:----------------------------:|
-|RapidJSON|155%|30682|
-|[`ajv`](https://github.com/epoberezkin/ajv)|100%|19770 (± 1.31%)|
-|[`is-my-json-valid`](https://github.com/mafintosh/is-my-json-valid)|70%|13835 (± 2.84%)|
-|[`jsen`](https://github.com/bugventure/jsen)|57.7%|11411 (± 1.27%)|
-|[`schemasaurus`](https://github.com/AlexeyGrishin/schemasaurus)|26%|5145 (± 1.62%)|
-|[`themis`](https://github.com/playlyfe/themis)|19.9%|3935 (± 2.69%)|
-|[`z-schema`](https://github.com/zaggino/z-schema)|7%|1388 (± 0.84%)|
-|[`jsck`](https://github.com/pandastrike/jsck#readme)|3.1%|606 (± 2.84%)|
-|[`jsonschema`](https://github.com/tdegrunt/jsonschema#readme)|0.9%|185 (± 1.01%)|
-|[`skeemas`](https://github.com/Prestaul/skeemas#readme)|0.8%|154 (± 0.79%)|
-|tv4|0.5%|93 (± 0.94%)|
-|[`jayschema`](https://github.com/natesilva/jayschema)|0.1%|21 (± 1.14%)|
-
-That is, RapidJSON is about 1.5x faster than the fastest JavaScript library (ajv). And 1400x faster than the slowest one.
-
-# Schema violation reporting {#Reporting}
-
-(Unreleased as of 2017-09-20)
-
-When validating an instance against a JSON Schema,
-it is often desirable to report not only whether the instance is valid,
-but also the ways in which it violates the schema.
-
-The `SchemaValidator` class
-collects errors encountered during validation
-into a JSON `Value`.
-This error object can then be accessed as `validator.GetError()`.
-
-The structure of the error object is subject to change
-in future versions of RapidJSON,
-as there is no standard schema for violations.
-The details below this point are provisional only.
-
-## General provisions {#ReportingGeneral}
-
-Validation of an instance value against a schema
-produces an error value.
-The error value is always an object.
-An empty object `{}` indicates the instance is valid.
-
-* The name of each member
-  corresponds to the JSON Schema keyword that is violated.
-* The value is either an object describing a single violation,
-  or an array of such objects.
-
-Each violation object contains two string-valued members
-named `instanceRef` and `schemaRef`.
-`instanceRef` contains the URI fragment serialization
-of a JSON Pointer to the instance subobject
-in which the violation was detected.
-`schemaRef` contains the URI of the schema
-and the fragment serialization of a JSON Pointer
-to the subschema that was violated.
-
-Individual violation objects can contain other keyword-specific members.
-These are detailed further.
-
-For example, validating this instance:
-
-~~~json
-{"numbers": [1, 2, "3", 4, 5]}
-~~~
-
-against this schema:
-
-~~~json
-{
-  "type": "object",
-  "properties": {
-    "numbers": {"$ref": "numbers.schema.json"}
-  }
-}
-~~~
-
-where `numbers.schema.json` refers
-(via a suitable `IRemoteSchemaDocumentProvider`)
-to this schema:
-
-~~~json
-{
-  "type": "array",
-  "items": {"type": "number"}
-}
-~~~
-
-produces the following error object:
-
-~~~json
-{
-  "type": {
-    "instanceRef": "#/numbers/2",
-    "schemaRef": "numbers.schema.json#/items",
-    "expected": ["number"],
-    "actual": "string"
-  }
-}
-~~~
-
-## Validation keywords for numbers {#Numbers}
-
-### multipleOf {#multipleof}
-
-* `expected`: required number strictly greater than 0.
-  The value of the `multipleOf` keyword specified in the schema.
-* `actual`: required number.
-  The instance value.
-
-### maximum {#maximum}
-
-* `expected`: required number.
-  The value of the `maximum` keyword specified in the schema.
-* `exclusiveMaximum`: optional boolean.
-  This will be true if the schema specified `"exclusiveMaximum": true`,
-  and will be omitted otherwise.
-* `actual`: required number.
-  The instance value.
-
-### minimum {#minimum}
-
-* `expected`: required number.
-  The value of the `minimum` keyword specified in the schema.
-* `exclusiveMinimum`: optional boolean.
-  This will be true if the schema specified `"exclusiveMinimum": true`,
-  and will be omitted otherwise.
-* `actual`: required number.
-  The instance value.
-
-## Validation keywords for strings {#Strings}
-
-### maxLength {#maxLength}
-
-* `expected`: required number greater than or equal to 0.
-  The value of the `maxLength` keyword specified in the schema.
-* `actual`: required string.
-  The instance value.
-
-### minLength {#minLength}
-
-* `expected`: required number greater than or equal to 0.
-  The value of the `minLength` keyword specified in the schema.
-* `actual`: required string.
-  The instance value.
-
-### pattern {#pattern}
-
-* `actual`: required string.
-  The instance value.
-
-(The expected pattern is not reported
-because the internal representation in `SchemaDocument`
-does not store the pattern in original string form.)
-
-## Validation keywords for arrays {#Arrays}
-
-### additionalItems {#additionalItems}
-
-This keyword is reported
-when the value of `items` schema keyword is an array,
-the value of `additionalItems` is `false`,
-and the instance is an array
-with more items than specified in the `items` array.
-
-* `disallowed`: required integer greater than or equal to 0.
-  The index of the first item that has no corresponding schema.
-
-### maxItems and minItems {#maxItems-minItems}
-
-* `expected`: required integer greater than or equal to 0.
-  The value of `maxItems` (respectively, `minItems`)
-  specified in the schema.
-* `actual`: required integer greater than or equal to 0.
-  Number of items in the instance array.
-
-### uniqueItems {#uniqueItems}
-
-* `duplicates`: required array
-  whose items are integers greater than or equal to 0.
-  Indices of items of the instance that are equal.
-
-(RapidJSON only reports the first two equal items,
-for performance reasons.)
-
-## Validation keywords for objects
-
-### maxProperties and minProperties {#maxProperties-minProperties}
-
-* `expected`: required integer greater than or equal to 0.
-  The value of `maxProperties` (respectively, `minProperties`)
-  specified in the schema.
-* `actual`: required integer greater than or equal to 0.
-  Number of properties in the instance object.
-
-### required {#required}
-
-* `missing`: required array of one or more unique strings.
-  The names of properties
-  that are listed in the value of the `required` schema keyword
-  but not present in the instance object.
-
-### additionalProperties {#additionalProperties}
-
-This keyword is reported
-when the schema specifies `additionalProperties: false`
-and the name of a property of the instance is
-neither listed in the `properties` keyword
-nor matches any regular expression in the `patternProperties` keyword.
-
-* `disallowed`: required string.
-  Name of the offending property of the instance.
-
-(For performance reasons,
-RapidJSON only reports the first such property encountered.)
-
-### dependencies {#dependencies}
-
-* `errors`: required object with one or more properties.
-  Names and values of its properties are described below.
-
-Recall that JSON Schema Draft 04 supports
-*schema dependencies*,
-where presence of a named *controlling* property
-requires the instance object to be valid against a subschema,
-and *property dependencies*,
-where presence of a controlling property
-requires other *dependent* properties to be also present.
-
-For a violated schema dependency,
-`errors` will contain a property
-with the name of the controlling property
-and its value will be the error object
-produced by validating the instance object
-against the dependent schema.
-
-For a violated property dependency,
-`errors` will contain a property
-with the name of the controlling property
-and its value will be an array of one or more unique strings
-listing the missing dependent properties.
-
-## Validation keywords for any instance type {#AnyTypes}
-
-### enum {#enum}
-
-This keyword has no additional properties
-beyond `instanceRef` and `schemaRef`.
-
-* The allowed values are not listed
-  because `SchemaDocument` does not store them in original form.
-* The violating value is not reported
-  because it might be unwieldy.
-
-If you need to report these details to your users,
-you can access the necessary information
-by following `instanceRef` and `schemaRef`.
-
-### type {#type}
-
-* `expected`: required array of one or more unique strings,
-  each of which is one of the seven primitive types
-  defined by the JSON Schema Draft 04 Core specification.
-  Lists the types allowed by the `type` schema keyword.
-* `actual`: required string, also one of seven primitive types.
-  The primitive type of the instance.
-
-### allOf, anyOf, and oneOf {#allOf-anyOf-oneOf}
-
-* `errors`: required array of at least one object.
-  There will be as many items as there are subschemas
-  in the `allOf`, `anyOf` or `oneOf` schema keyword, respectively.
-  Each item will be the error value
-  produced by validating the instance
-  against the corresponding subschema.
-
-For `allOf`, at least one error value will be non-empty.
-For `anyOf`, all error values will be non-empty.
-For `oneOf`, either all error values will be non-empty,
-or more than one will be empty.
-
-### not {#not}
-
-This keyword has no additional properties
-apart from `instanceRef` and `schemaRef`.