@antv/l7-layers 2.9.32-alpha.0 → 2.9.32-alpha.2

package/es/line/shaders/dash/arc_dash_vert.glsl

@@ -1,150 +0,0 @@
-
-attribute vec4 a_Color;
-attribute vec3 a_Position;
-attribute vec4 a_Instance;
-attribute float a_Size;
-uniform mat4 u_ModelMatrix;
-uniform mat4 u_Mvp;
-uniform float segmentNumber;
-varying vec4 v_color;
-
-
-uniform vec4 u_dash_array: [10.0, 5., 0, 0];
-uniform float u_lineDir: 1.0;
-varying vec4 v_dash_array;
-
-uniform float u_thetaOffset: 0.314;
-
-uniform float u_opacity: 1.0;
-varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
-
-#pragma include "styleMapping"
-#pragma include "styleMappingCalOpacity"
-#pragma include "styleMappingCalThetaOffset"
-
-#pragma include "projection"
-#pragma include "project"
-#pragma include "picking"
-
-float bezier3(vec3 arr, float t) {
-  float ut = 1. - t;
-  return (arr.x * ut + arr.y * t) * ut + (arr.y * ut + arr.z * t) * t;
-}
-vec2 midPoint(vec2 source, vec2 target, float arcThetaOffset) {
-  vec2 center = target - source;
-  float r = length(center);
-  float theta = atan(center.y, center.x);
-  float thetaOffset = arcThetaOffset;
-  float r2 = r / 2.0 / cos(thetaOffset);
-  float theta2 = theta + thetaOffset;
-  vec2 mid = vec2(r2*cos(theta2) + source.x, r2*sin(theta2) + source.y);
-  if(u_lineDir == 1.0) { // 正向
-    return mid;
-  } else { // 逆向
-    // (mid + vmin)/2 = (s + t)/2
-    vec2 vmid = source + target - mid;
-    return vmid;
-  }
-  // return mid;
-}
-float getSegmentRatio(float index) {
-  // dash: index / (segmentNumber - 1.);
-  // normal: smoothstep(0.0, 1.0, index / (segmentNumber - 1.));
-  return index / (segmentNumber - 1.);
-}
-vec2 interpolate (vec2 source, vec2 target, float t, float arcThetaOffset) {
-  // if the angularDist is PI, linear interpolation is applied. otherwise, use spherical interpolation
-  vec2 mid = midPoint(source, target, arcThetaOffset);
-  vec3 x = vec3(source.x, mid.x, target.x);
-  vec3 y = vec3(source.y, mid.y, target.y);
-  return vec2(bezier3(x ,t), bezier3(y,t));
-}
-vec2 getExtrusionOffset(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-  vec2 offset = dir_screenspace * offset_direction * setPickingSize(a_Size) / 2.0;
-  return offset;
-}
-vec2 getNormal(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-   return reverse_offset_normal(vec3(dir_screenspace,1.0)).xy * sign(offset_direction);
-}
-
-void main() {
-  v_color = a_Color;
-
-  // cal style mapping - 数据纹理映射部分的计算
-  styleMappingMat = mat4(
-    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
-    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
-    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
-    0.0, 0.0, 0.0, 0.0  // dataset 数据集
-  );
-
-  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
-  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
-  float columnWidth = 1.0/columnCount;  // 列宽
-  float rowHeight = 1.0/rowCount;       // 行高
-  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
-  float id = a_vertexId; // 第n个顶点
-  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
-  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
-  
-  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke -> thetaOffset... 
-  // 按顺序从 cell 中取值、若没有则自动往下取值
-  float textureOffset = 0.0; // 在 cell 中取值的偏移量
-
-  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
-  styleMappingMat[0][0] = opacityAndOffset.r;
-  textureOffset = opacityAndOffset.g;
-
-  vec2 thetaOffsetAndOffset = calThetaOffsetAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
-  styleMappingMat[0][1] = thetaOffsetAndOffset.r;
-  textureOffset = thetaOffsetAndOffset.g;
-  // cal style mapping - 数据纹理映射部分的计算
-
-  
-  vec2 source = a_Instance.rg;  // 起始点
-  vec2 target =  a_Instance.ba; // 终点
-  float segmentIndex = a_Position.x;
-  float segmentRatio = getSegmentRatio(segmentIndex);
-
-  float indexDir = mix(-1.0, 1.0, step(segmentIndex, 0.0));
-  float nextSegmentRatio = getSegmentRatio(segmentIndex + indexDir);
-
-  vec2 s = source;
-  vec2 t = target;
-  
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    s = unProjCustomCoord(source);
-    t = unProjCustomCoord(target);
-  }
-  float total_Distance = pixelDistance(s, t) / 2.0 * PI;
-  v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / total_Distance;
-
-  styleMappingMat[3].b = segmentIndex / segmentNumber;
-
-  // styleMappingMat[0][1] - arcThetaOffset
-  vec4 curr = project_position(vec4(interpolate(source, target, segmentRatio, styleMappingMat[0][1]), 0.0, 1.0));
-  vec4 next = project_position(vec4(interpolate(source, target, nextSegmentRatio, styleMappingMat[0][1]), 0.0, 1.0));
-  // v_normal = getNormal((next.xy - curr.xy) * indexDir, a_Position.y);
-  //unProjCustomCoord
-  
-  vec2 offset = project_pixel(getExtrusionOffset((next.xy - curr.xy) * indexDir, a_Position.y));
-  
-
-  // gl_Position = project_common_position_to_clipspace(vec4(curr.xy + offset, 0, 1.0));
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    // gl_Position = u_Mvp * (vec4(curr.xy + offset, 0, 1.0));
-    gl_Position = u_Mvp * (vec4(curr.xy + offset, 0, 1.0));
-  } else {
-    gl_Position = project_common_position_to_clipspace(vec4(curr.xy + offset, 0, 1.0));
-  }
-  gl_PointSize = 5.0;
-  setPickingColor(a_PickingColor);
-}

package/es/line/shaders/dash/line_dash_frag.glsl

@@ -1,31 +0,0 @@
-#define LineTypeSolid 0.0
-uniform float u_opacity : 1.0;
-
-varying vec4 v_color;
-
-// dash
-varying vec4 v_dash_array;
-
-#pragma include "picking"
-
-uniform float u_time;
-uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ]; // 控制运动
-
-varying mat4 styleMappingMat;
-// [animate, duration, interval, trailLength],
-void main() {
-  float opacity = styleMappingMat[0][0];
-  float d_distance_ratio = styleMappingMat[3].r; // 当前点位距离占线总长的比例
-  gl_FragColor = v_color;
-  gl_FragColor.a *= opacity; // 全局透明度
- 
-  float dashLength = mod(d_distance_ratio, v_dash_array.x + v_dash_array.y + v_dash_array.z + v_dash_array.w);
-  if(dashLength < v_dash_array.x || (dashLength > (v_dash_array.x + v_dash_array.y) && dashLength <  v_dash_array.x + v_dash_array.y + v_dash_array.z)) {
-    // 实线部分
-  } else {
-    // 虚线部分
-    discard;
-  };
-
-  gl_FragColor = filterColor(gl_FragColor);
-}

package/es/line/shaders/dash/line_dash_vert.glsl

@@ -1,93 +0,0 @@
-#define LineTypeSolid 0.0
-#define LineTypeDash 1.0
-#define Animate 0.0
-
-attribute float a_Miter;
-attribute vec4 a_Color;
-attribute vec2 a_Size;
-attribute vec3 a_Normal;
-attribute vec3 a_Position;
-
-attribute vec2 a_iconMapUV;
-
-// dash line
-attribute float a_Total_Distance;
-attribute vec2 a_DistanceAndIndex;
-
-uniform mat4 u_ModelMatrix;
-uniform mat4 u_Mvp;
-uniform vec4 u_dash_array: [10.0, 5., 0, 0];
-
-uniform float u_vertexScale: 1.0;
-
-#pragma include "projection"
-#pragma include "picking"
-
-varying vec4 v_color;
-varying vec4 v_dash_array;
-
-uniform float u_opacity: 1.0;
-varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
-
-#pragma include "styleMapping"
-#pragma include "styleMappingCalOpacity"
-
-void main() {
-  // cal style mapping - 数据纹理映射部分的计算
-  styleMappingMat = mat4(
-    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
-    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
-    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
-    0.0, 0.0, 0.0, 0.0  // distance_ratio/distance/pixelLen/texV
-  );
-
-  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
-  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
-  float columnWidth = 1.0/columnCount;  // 列宽
-  float rowHeight = 1.0/rowCount;       // 行高
-  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
-  float id = a_vertexId; // 第n个顶点
-  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
-  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
-  
-  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
-  // 按顺序从 cell 中取值、若没有则自动往下取值
-  float textureOffset = 0.0; // 在 cell 中取值的偏移量
-
-  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
-  styleMappingMat[0][0] = opacityAndOffset.r;
-  textureOffset = opacityAndOffset.g;
-  // cal style mapping - 数据纹理映射部分的计算
-
-  v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / a_Total_Distance;
-  v_color = a_Color;
-
-  vec3 size = a_Miter * setPickingSize(a_Size.x) * reverse_offset_normal(a_Normal);
-  vec2 offset = project_pixel(size.xy);
-
-  // 设置数据集的参数
-  styleMappingMat[3][0] = a_DistanceAndIndex.x / a_Total_Distance; // 当前点位距离占线总长的比例
-  styleMappingMat[3][1] = a_DistanceAndIndex.x;       // 当前顶点的距离
-
-  vec4 project_pos = project_position(vec4(a_Position.xy, 0, 1.0));
-
-  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, a_Size.y, 1.0));
-
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    gl_Position = u_Mvp * (vec4(project_pos.xy + offset, project_pixel(a_Size.y), 1.0));
-  } else {
-    float lineHeight = a_Size.y;
- 
-    // #define COORDINATE_SYSTEM_P20 5.0
-    // #define COORDINATE_SYSTEM_P20_OFFSET 6.0
-    // amap1.x
-    if(u_CoordinateSystem == COORDINATE_SYSTEM_P20 || u_CoordinateSystem == COORDINATE_SYSTEM_P20_OFFSET) {
-      // 保持高度相对不变
-      lineHeight *= pow(2.0, 20.0 - u_Zoom);
-    }
-
-    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, lineHeight, 1.0));
-  }
-
-  setPickingColor(a_PickingColor);
-}

package/es/line/shaders/half/line_half_frag.glsl

@@ -1,53 +0,0 @@
-#define COORDINATE_SYSTEM_LNGLAT 1.0        // mapbox
-#define COORDINATE_SYSTEM_LNGLAT_OFFSET 2.0 // mapbox offset
-#define COORDINATE_SYSTEM_VECTOR_TILE 3.0
-#define COORDINATE_SYSTEM_IDENTITY 4.0
-#define COORDINATE_SYSTEM_P20 5.0           // amap
-#define COORDINATE_SYSTEM_P20_OFFSET 6.0    // amap offset
-#define COORDINATE_SYSTEM_METER_OFFSET 7.0
-
-#define COORDINATE_SYSTEM_P20_2 8.0         // amap2.0
-uniform float u_CoordinateSystem;
-varying vec4 v_color;
-uniform float u_arrow: 0.0;
-uniform float u_linearColor: 0;
-uniform vec4 u_sourceColor;
-uniform vec4 u_targetColor;
-
-#pragma include "picking"
-
-varying mat4 styleMappingMat;
-void main() {
-  float distanceAndIndex = styleMappingMat[0][3];
-  float miter = styleMappingMat[0][2];
-
-  float opacity = styleMappingMat[0][0];
-  float d_distance_ratio = styleMappingMat[3].r; // 当前点位距离占线总长的比例
-
-
-  if(u_arrow > 0.0 && distanceAndIndex < 2.0) { // arrow
-    if(u_CoordinateSystem == COORDINATE_SYSTEM_P20 || u_CoordinateSystem == COORDINATE_SYSTEM_P20_OFFSET) { 
-      if(cross(vec3(styleMappingMat[1].rg, 0.0), vec3(styleMappingMat[1].ba, 0.0)).z < 0.0) { // amap
-        discard;
-      }
-    } else { // amap2 mapbox map
-      if(cross(vec3(styleMappingMat[1].rg, 0.0), vec3(styleMappingMat[1].ba, 0.0)).z > 0.0) { 
-        discard;
-      }
-    }
-  } else { // line body
-    if(miter < 0.0) {
-      discard;
-    }
-  }
-
-
-  if(u_linearColor == 1.0) { // 使用渐变颜色
-    gl_FragColor = mix(u_sourceColor, u_targetColor, d_distance_ratio);
-  } else { // 使用 color 方法传入的颜色
-    gl_FragColor = v_color;
-  }
-
-  gl_FragColor.a *= opacity; // 全局透明度
-  gl_FragColor = filterColor(gl_FragColor);
-}

package/es/line/shaders/half/line_half_vert.glsl

@@ -1,169 +0,0 @@
-attribute float a_Miter;
-attribute vec4 a_Color;
-attribute vec2 a_Size;
-attribute vec3 a_Normal;
-attribute vec3 a_Position;
-
-// dash line
-attribute vec4 a_dirPoints;
-attribute vec3 a_DistanceAndIndex;
-
-uniform vec4 u_lineDir;
-
-uniform mat4 u_ModelMatrix;
-uniform mat4 u_Mvp;
-
-#pragma include "projection"
-#pragma include "picking"
-
-varying vec4 v_color;
-
-uniform float u_linearColor: 0;
-uniform float u_arrow: 0.0;
-uniform float u_arrowHeight: 3.0;
-uniform float u_arrowWidth: 2.0;
-uniform float u_tailWidth: 1.0;
-
-uniform float u_opacity: 1.0;
-varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
-
-#pragma include "styleMapping"
-#pragma include "styleMappingCalOpacity"
-
-vec2 calculateArrow(vec2 offset) {
-  /*
-  * 在支持箭头的时候，第二、第三组顶点是额外插入用于构建顶点的
-  */
-  float arrowFlag = -1.0;
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) {
-    // 高德 2.0 的旋转角度不同
-    arrowFlag = 1.0;
-  }
-  float pi = arrowFlag * 3.1415926/2.;
-  if(a_Miter < 0.) {
-    // 根据线的两侧偏移不同、旋转的方向相反
-    pi = -pi;
-  }
-  highp float angle_sin = sin(pi);
-  highp float angle_cos = cos(pi);
-  // 计算垂直与线方向的旋转矩阵
-  mat2 rotation_matrix = mat2(angle_cos, -1.0 * angle_sin, angle_sin, angle_cos);
-  float arrowWidth = u_arrowWidth;
-  float arrowHeight = u_arrowHeight;
-
-  vec2 arrowOffset = vec2(0.0);
-  /*
-  * a_DistanceAndIndex.y 用于标记当前顶点属于哪一组（两个顶点一组，构成线的其实是矩形，最简需要四个顶点、两组顶点构成）
-  */
-  if(a_DistanceAndIndex.y == 0.0) {
-    // 箭头尖部
-    offset = vec2(0.0);
-  } else if(a_DistanceAndIndex.y == 1.0) {
-    // 箭头两侧
-    arrowOffset = rotation_matrix*(offset * arrowHeight);
-    offset += arrowOffset; // 沿线偏移
-    offset = offset * arrowWidth; // 垂直线向外偏移（是构建箭头两侧的顶点）
-  } else if(a_DistanceAndIndex.y == 2.0 || a_DistanceAndIndex.y == 3.0 || a_DistanceAndIndex.y == 4.0) {
-    // 偏移其余的点位（将长度让位给箭头）
-    arrowOffset = rotation_matrix*(offset * arrowHeight) * arrowWidth;
-    offset += arrowOffset;// 沿线偏移
-  }
-
-  return offset;
-}
-
-void main() {
-  // cal style mapping - 数据纹理映射部分的计算
-  styleMappingMat = mat4(
-    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - a_Miter - a_DistanceAndIndex
-    0.0, 0.0, 0.0, 0.0, // originX - originY - vectorX - vectorY
-    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
-    0.0, 0.0, 0.0, 0.0  // distance_ratio/distance/pixelLen/texV
-  );
-  styleMappingMat[0][3] = a_DistanceAndIndex.y;
-  styleMappingMat[0][2] = a_Miter;
-
-  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
-  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
-  float columnWidth = 1.0/columnCount;  // 列宽
-  float rowHeight = 1.0/rowCount;       // 行高
-  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
-  float id = a_vertexId; // 第n个顶点
-  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
-  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
-  
-  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
-  // 按顺序从 cell 中取值、若没有则自动往下取值
-  float textureOffset = 0.0; // 在 cell 中取值的偏移量
-
-  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
-  styleMappingMat[0][0] = opacityAndOffset.r;
-  textureOffset = opacityAndOffset.g;
-  // cal style mapping - 数据纹理映射部分的计算
-
-
-  v_color = a_Color;
-
-  vec3 size = a_Miter * setPickingSize(a_Size.x) * reverse_offset_normal(a_Normal);
-  
-  vec2 offset = project_pixel(size.xy);
-
-  // styleMappingMat[1].rg = a_Position.xy + offset;
-
-  vec2 copyOffset = vec2(offset.x, offset.y);
-
-  float lineDistance = a_DistanceAndIndex.x;
-  float total_Distance = a_DistanceAndIndex.z;
-  float currentLinePointRatio = lineDistance / total_Distance;
- 
-  if(u_arrow > 0.0) {
-      //  计算箭头
-    offset = calculateArrow(offset);
-
-    if(a_DistanceAndIndex.y > 4.0) {
-      offset *= mix(1.0, u_tailWidth, currentLinePointRatio);
-    }
-  }
-
-  float lineOffsetWidth = length(offset + offset * sign(a_Miter)); // 线横向偏移的距离（向两侧偏移的和）
-  float linePixelSize = project_pixel(a_Size.x) * 2.0;  // 定点位置偏移，按地图等级缩放后的距离 单侧 * 2
-
-  // 设置数据集的参数
-  styleMappingMat[3][0] = currentLinePointRatio; // 当前点位距离占线总长的比例
-  styleMappingMat[3][1] = lineDistance;       // 当前顶点的距离
-
-  vec4 project_pos = project_position(vec4(a_Position.xy, 0, 1.0));
-
-  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, a_Size.y, 1.0));
-
-  float h = float(a_Position.z); // 线顶点的高度 - 兼容不存在第三个数值的情况 vertex height
-  float lineHeight = a_Size.y; // size 第二个参数代表的高度 [linewidth, lineheight]
-
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    lineHeight *= 0.2; // 保持和 amap/mapbox 一致的效果
-    gl_Position = u_Mvp * (vec4(project_pos.xy + offset, lineHeight, 1.0));
-  } else {
-    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xy + offset, lineHeight, 1.0));
-  }
-  
-  if(u_arrow > 0.0 && a_DistanceAndIndex.y < 2.0) {
-    vec2 startPoint = a_dirPoints.rg;
-    vec2 endPoint = a_dirPoints.ba;
-    vec4 t1 = project_position(vec4(startPoint, 0, 1.0));
-    vec4 t2 = project_position(vec4(endPoint, 0, 1.0));
-    // TODO： 后续优化可以把位置计算放在 cpu 中完成
-    if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-      vec2 p1 = (u_Mvp * vec4(t1.xy, 0.0, 1.0)).xy;
-      vec2 p2 = (u_Mvp * vec4(t2.xy, 0.0, 1.0)).xy;
-      styleMappingMat[1].rg = normalize(p1 - p2);
-      styleMappingMat[1].ba = normalize(gl_Position.xy - p2);
-    } else {
-      vec2 p1 = project_common_position_to_clipspace(vec4(t1.xy, 0.0, 1.0)).xy;
-      vec2 p2 = project_common_position_to_clipspace(vec4(t2.xy, 0.0, 1.0)).xy;
-      styleMappingMat[1].rg = normalize(p1 - p2);
-      styleMappingMat[1].ba = normalize(gl_Position.xy - p2);
-    }
-  }
-
-  setPickingColor(a_PickingColor);
-}

package/es/line/shaders/line_arc2d_vert.glsl

@@ -1,114 +0,0 @@
-#define LineTypeSolid 0.0
-#define LineTypeDash 1.0
-#define Animate 0.0
-attribute vec4 a_Color;
-attribute vec3 a_Position;
-attribute vec4 a_Instance;
-attribute float a_Size;
-uniform mat4 u_ModelMatrix;
-uniform float segmentNumber;
-uniform vec4 u_animate: [ 1., 2., 1.0, 0.2 ];
-varying vec4 v_color;
-varying vec2 v_normal;
-
-varying float v_distance_ratio;
-uniform float u_line_type: 0.0;
-uniform vec4 u_dash_array: [10.0, 5., 0, 0];
-varying vec4 v_dash_array;
-
-#pragma include "projection"
-#pragma include "project"
-#pragma include "picking"
-
-float maps (float value, float start1, float stop1, float start2, float stop2) {
-    return start2 + (stop2 - start2) * ((value - start1) / (stop1 - start1));
-}
-
-float getSegmentRatio(float index) {
-    return smoothstep(0.0, 1.0, index / (segmentNumber - 1.));
-}
-
-float paraboloid(vec2 source, vec2 target, float ratio) {
-    vec2 x = mix(source, target, ratio);
-    vec2 center = mix(source, target, 0.5);
-    float dSourceCenter = distance(source, center);
-    float dXCenter = distance(x, center);
-    return (dSourceCenter + dXCenter) * (dSourceCenter - dXCenter);
-}
-
-vec3 getPos(vec2 source, vec2 target, float segmentRatio) {
-     float vertex_height = paraboloid(source, target, segmentRatio);
-
-    return vec3(
-    mix(source, target, segmentRatio),
-    sqrt(max(0.0, vertex_height))
-    );
-}
-vec2 getExtrusionOffset(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-  vec2 offset = dir_screenspace * offset_direction * setPickingSize(a_Size) / 2.0;
-  return offset * vec2(1.0, -1.0);
-}
-vec2 getNormal(vec2 line_clipspace, float offset_direction) {
-  // normalized direction of the line
-  vec2 dir_screenspace = normalize(line_clipspace);
-  // rotate by 90 degrees
-   dir_screenspace = vec2(-dir_screenspace.y, dir_screenspace.x);
-   return reverse_offset_normal(vec3(dir_screenspace,1.0)).xy * sign(offset_direction);
-}
-float getAngularDist (vec2 source, vec2 target) {
-  vec2 delta = source - target;
-  vec2 sin_half_delta = sin(delta / 2.0);
-  float a =
-    sin_half_delta.y * sin_half_delta.y +
-    cos(source.y) * cos(target.y) *
-    sin_half_delta.x * sin_half_delta.x;
-  return 2.0 * atan(sqrt(a), sqrt(1.0 - a));
-}
-vec2 interpolate (vec2 source, vec2 target, float angularDist, float t) {
-  // if the angularDist is PI, linear interpolation is applied. otherwise, use spherical interpolation
-  if(abs(angularDist - PI) < 0.001) {
-    return (1.0 - t) * source + t * target;
-  }
-  float a = sin((1.0 - t) * angularDist) / sin(angularDist);
-  float b = sin(t * angularDist) / sin(angularDist);
-  vec2 sin_source = sin(source);
-  vec2 cos_source = cos(source);
-  vec2 sin_target = sin(target);
-  vec2 cos_target = cos(target);
-  float x = a * cos_source.y * cos_source.x + b * cos_target.y * cos_target.x;
-  float y = a * cos_source.y * sin_source.x + b * cos_target.y * sin_target.x;
-  float z = a * sin_source.y + b * sin_target.y;
-  return vec2(atan(y, x), atan(z, sqrt(x * x + y * y)));
-}
-
-void main() {
-  v_color = a_Color;
-  vec2 source = radians(a_Instance.rg);
-  vec2 target = radians(a_Instance.ba);
-  float angularDist = getAngularDist(source, target);
-  float segmentIndex = a_Position.x;
-  float segmentRatio = getSegmentRatio(segmentIndex);
-  float indexDir = mix(-1.0, 1.0, step(segmentIndex, 0.0));
-  if(u_line_type == LineTypeDash) {
-    v_distance_ratio = segmentIndex / segmentNumber;
-    float total_Distance = pixelDistance(a_Instance.rg, a_Instance.ba);
-    v_dash_array = pow(2.0, 20.0 - u_Zoom) * u_dash_array / (total_Distance / segmentNumber * segmentIndex);
-  }
-  if(u_animate.x == Animate) {
-      v_distance_ratio = segmentIndex / segmentNumber;
-  }
-  float nextSegmentRatio = getSegmentRatio(segmentIndex + indexDir);
-  v_distance_ratio = segmentIndex / segmentNumber;
-  vec4 curr = project_position(vec4(degrees(interpolate(source, target, angularDist, segmentRatio)), 0.0, 1.0));
-  vec4 next = project_position(vec4(degrees(interpolate(source, target, angularDist, nextSegmentRatio)), 0.0, 1.0));
-  v_normal = getNormal((next.xy - curr.xy) * indexDir, a_Position.y);
-  vec2 offset = project_pixel(getExtrusionOffset((next.xy - curr.xy) * indexDir, a_Position.y));
-  //  vec4 project_pos = project_position(vec4(curr.xy, 0, 1.0));
-  gl_Position = project_common_position_to_clipspace(vec4(curr.xy + offset, curr.z, 1.0));
-  setPickingColor(a_PickingColor);
-}
-