@alteriom/painlessmesh 1.7.4 → 1.7.5

package/examples/basic/.pio/libdeps/esp32/AsyncTCP/LICENSE

@@ -1,165 +0,0 @@
-                   GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
-  This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
-  0. Additional Definitions.
-
-  As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
-  "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
-  An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
-  A "Combined Work" is a work produced by combining or linking an
-Application with the Library.  The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
-  The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
-  The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
-  1. Exception to Section 3 of the GNU GPL.
-
-  You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
-  2. Conveying Modified Versions.
-
-  If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
-   a) under this License, provided that you make a good faith effort to
-   ensure that, in the event an Application does not supply the
-   function or data, the facility still operates, and performs
-   whatever part of its purpose remains meaningful, or
-
-   b) under the GNU GPL, with none of the additional permissions of
-   this License applicable to that copy.
-
-  3. Object Code Incorporating Material from Library Header Files.
-
-  The object code form of an Application may incorporate material from
-a header file that is part of the Library.  You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
-   a) Give prominent notice with each copy of the object code that the
-   Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the object code with a copy of the GNU GPL and this license
-   document.
-
-  4. Combined Works.
-
-  You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
-   a) Give prominent notice with each copy of the Combined Work that
-   the Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the Combined Work with a copy of the GNU GPL and this license
-   document.
-
-   c) For a Combined Work that displays copyright notices during
-   execution, include the copyright notice for the Library among
-   these notices, as well as a reference directing the user to the
-   copies of the GNU GPL and this license document.
-
-   d) Do one of the following:
-
-       0) Convey the Minimal Corresponding Source under the terms of this
-       License, and the Corresponding Application Code in a form
-       suitable for, and under terms that permit, the user to
-       recombine or relink the Application with a modified version of
-       the Linked Version to produce a modified Combined Work, in the
-       manner specified by section 6 of the GNU GPL for conveying
-       Corresponding Source.
-
-       1) Use a suitable shared library mechanism for linking with the
-       Library.  A suitable mechanism is one that (a) uses at run time
-       a copy of the Library already present on the user's computer
-       system, and (b) will operate properly with a modified version
-       of the Library that is interface-compatible with the Linked
-       Version.
-
-   e) Provide Installation Information, but only if you would otherwise
-   be required to provide such information under section 6 of the
-   GNU GPL, and only to the extent that such information is
-   necessary to install and execute a modified version of the
-   Combined Work produced by recombining or relinking the
-   Application with a modified version of the Linked Version. (If
-   you use option 4d0, the Installation Information must accompany
-   the Minimal Corresponding Source and Corresponding Application
-   Code. If you use option 4d1, you must provide the Installation
-   Information in the manner specified by section 6 of the GNU GPL
-   for conveying Corresponding Source.)
-
-  5. Combined Libraries.
-
-  You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
-   a) Accompany the combined library with a copy of the same work based
-   on the Library, uncombined with any other library facilities,
-   conveyed under the terms of this License.
-
-   b) Give prominent notice with the combined library that part of it
-   is a work based on the Library, and explaining where to find the
-   accompanying uncombined form of the same work.
-
-  6. Revised Versions of the GNU Lesser General Public License.
-
-  The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
-  Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
-  If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.

package/examples/basic/.pio/libdeps/esp32/AsyncTCP/README.md

@@ -1,55 +0,0 @@
-![https://avatars.githubusercontent.com/u/195753706?s=96&v=4](https://avatars.githubusercontent.com/u/195753706?s=96&v=4)
-
-# AsyncTCP
-
-[![License: LGPL 3.0](https://img.shields.io/badge/License-LGPL%203.0-yellow.svg)](https://opensource.org/license/lgpl-3-0/)
-[![Continuous Integration](https://github.com/ESP32Async/AsyncTCP/actions/workflows/ci.yml/badge.svg)](https://github.com/ESP32Async/AsyncTCP/actions/workflows/ci.yml)
-[![PlatformIO Registry](https://badges.registry.platformio.org/packages/ESP32Async/library/AsyncTCP.svg)](https://registry.platformio.org/libraries/ESP32Async/AsyncTCP)
-
-Discord Server: [https://discord.gg/X7zpGdyUcY](https://discord.gg/X7zpGdyUcY)
-
-## Async TCP Library for ESP32 Arduino
-
-This is a fully asynchronous TCP library, aimed at enabling trouble-free, multi-connection network environment for Espressif's ESP32 MCUs.
-
-This library is the base for [ESPAsyncWebServer](https://github.com/ESP32Async/ESPAsyncWebServer)
-
-## How to install
-
-The library can be downloaded from the releases page at [https://github.com/ESP32Async/AsyncTCP/releases](https://github.com/ESP32Async/AsyncTCP/releases).
-
-It is also deployed in these registries:
-
-- Arduino Library Registry: [https://github.com/arduino/library-registry](https://github.com/arduino/library-registry)
-
-- ESP Component Registry [https://components.espressif.com/components/esp32async/asynctcp/](https://components.espressif.com/components/esp32async/asynctcp/)
-
-- PlatformIO Registry: [https://registry.platformio.org/libraries/esp32async/AsyncTCP](https://registry.platformio.org/libraries/esp32async/AsyncTCP)
-
-  - Use: `lib_deps=ESP32Async/AsyncTCP` to point to latest version
-  - Use: `lib_deps=ESP32Async/AsyncTCP @ ^<x.y.z>` to point to latest version with the same major version
-  - Use: `lib_deps=ESP32Async/AsyncTCP @ <x.y.z>` to always point to the same version (reproductible build)
-
-## AsyncClient and AsyncServer
-
-The base classes on which everything else is built. They expose all possible scenarios, but are really raw and require more skills to use.
-
-## Important recommendations
-
-Most of the crashes are caused by improper configuration of the library for the project.
-Here are some recommendations to avoid them.
-
-I personally use the following configuration in my projects:
-
-```c++
-  -D CONFIG_ASYNC_TCP_MAX_ACK_TIME=5000 // (keep default)
-  -D CONFIG_ASYNC_TCP_PRIORITY=10 // (keep default)
-  -D CONFIG_ASYNC_TCP_QUEUE_SIZE=64 // (keep default)
-  -D CONFIG_ASYNC_TCP_RUNNING_CORE=1 // force async_tcp task to be on same core as the app (default is core 0)
-  -D CONFIG_ASYNC_TCP_STACK_SIZE=4096 // reduce the stack size (default is 16K)
-```
-
-## Compatibility
-
-- ESP32
-- Arduino Core 2.x and 3.x

package/examples/basic/.pio/libdeps/esp32/AsyncTCP/examples/AsyncSend/AsyncSend.ino

@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: LGPL-3.0-or-later
-// Copyright 2016-2025 Hristo Gochkov, Mathieu Carbou, Emil Muratov
-
-/*
-  This example demonstrates how to send data to a remote server asynchronously.
-  Run on the remote computer: nc -l -p 1234
-
-  You should see in the logs:
-
-Connected!
-Will send 5760 bytes...
-Acked 1436 bytes in 19 ms
-Will send 1436 bytes...
-Acked 1436 bytes in 2 ms
-Will send 996 bytes...
-Waiting for acks...
-Acked 1436 bytes in 1 ms
-Acked 1436 bytes in 5 ms
-Acked 1452 bytes in 17 ms
-Acked 996 bytes in 28 ms
-Buffer received - next send in 2 sec
-Will send 5760 bytes...
-Acked 1436 bytes in 14 ms
-Will send 1436 bytes...
-Acked 1436 bytes in 2 ms
-Acked 1436 bytes in 0 ms
-Acked 1452 bytes in 1 ms
-Will send 996 bytes...
-Waiting for acks...
-Acked 1436 bytes in 3 ms
-Acked 996 bytes in 18 ms
-Buffer received - next send in 2 sec
-
-  And in the remote terminal 3072 characters sent [.........  ...........] and so on.
-*/
-
-#include <Arduino.h>
-#include <AsyncTCP.h>
-#include <StreamString.h>
-#include <WiFi.h>
-#include <assert.h>
-
-#include <functional>
-#include <string>
-
-#define WIFI_SSID     "IoT"
-#define WIFI_PASSWORD ""
-
-#define REMOTE_IP   "192.168.125.116"
-#define REMOTE_PORT 1234
-
-#define BUFFER_SIZE 8 * 1024
-
-static char buffer[BUFFER_SIZE] = {0};
-static size_t bufferPos = 0;
-
-// 0 == disconnected
-// 1 == connecting
-// 2 == connected
-static uint8_t state = 0;
-
-// number of bytes waiting for a ack
-static size_t waitingAck = 0;
-
-static AsyncClient client;
-
-void setup() {
-  Serial.begin(115200);
-  while (!Serial) {
-    continue;
-  }
-
-  // connect to WiFi
-  WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
-  while (WiFi.status() != WL_CONNECTED) {
-    delay(500);
-  }
-  Serial.println("Connected to WiFi!");
-  Serial.println(WiFi.localIP());
-
-  // fill buffer
-  buffer[0] = '[';
-  for (size_t i = 1; i < BUFFER_SIZE - 1; i++) {
-    buffer[i] = '.';
-  }
-  buffer[BUFFER_SIZE - 1] = ']';
-
-  // register a callback when the client disconnects
-  client.onDisconnect([](void *arg, AsyncClient *client) {
-    Serial.printf("Disconnected.\n");
-    state = 0;
-  });
-
-  // register a callback when an error occurs
-  client.onError([](void *arg, AsyncClient *client, int8_t error) {
-    Serial.printf("Error: %s\n", client->errorToString(error));
-  });
-
-  // register a callback when data arrives, to accumulate it
-  client.onData([](void *arg, AsyncClient *client, void *data, size_t len) {
-    Serial.printf("Received %u bytes...\n", len);
-    Serial.write((uint8_t *)data, len);
-  });
-
-  // register a callback when we are connected
-  client.onConnect([](void *arg, AsyncClient *client) {
-    Serial.printf("Connected!\n");
-    state = 2;
-  });
-
-  client.onAck([](void *arg, AsyncClient *client, size_t len, uint32_t time) {
-    Serial.printf("Acked %u bytes in %" PRIu32 " ms\n", len, time);
-    assert(waitingAck >= len);
-    waitingAck -= len;
-  });
-
-  client.setRxTimeout(20000);
-  client.setNoDelay(true);
-}
-
-void loop() {
-  switch (state) {
-    case 0:
-    {
-      Serial.printf("Connecting...\n");
-      if (!client.connect(REMOTE_IP, REMOTE_PORT)) {
-        Serial.printf("Failed to connect!\n");
-        delay(1000);  // to not flood logs
-      } else {
-        state = 1;
-      }
-      break;
-    }
-
-    case 1:
-    {
-      Serial.printf("Still connecting...\n");
-      delay(500);  // to not flood logs
-      break;
-    }
-
-    case 2:
-    {
-      // fill PCB space until we can
-      size_t willSend;
-      while (bufferPos < BUFFER_SIZE && (willSend = client.write(buffer + bufferPos, BUFFER_SIZE - bufferPos))) {
-        Serial.printf("Will send %u bytes...\n", willSend);
-        bufferPos += willSend;
-        waitingAck += willSend;
-      }
-
-      // we have sent the whole buffer ?
-      if (bufferPos >= BUFFER_SIZE) {
-        // wait for acks, or send again after 2 sec
-        if (waitingAck) {
-          Serial.printf("Waiting for acks...\n");
-          delay(100);
-        } else {
-          Serial.printf("Buffer received - next send in 2 sec\n");
-          delay(2000);
-          bufferPos = 0;
-        }
-      }
-      break;
-    }
-
-    default: break;
-  }
-}

package/examples/basic/.pio/libdeps/esp32/AsyncTCP/examples/Client/Client.ino

@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: LGPL-3.0-or-later
-// Copyright 2016-2025 Hristo Gochkov, Mathieu Carbou, Emil Muratov
-
-#include <Arduino.h>
-#include <AsyncTCP.h>
-#include <WiFi.h>
-
-// Run a server at the root of the project with:
-// > python3 -m http.server 3333
-// Now you can open a browser and test it works by visiting http://192.168.125.122:3333/ or http://192.168.125.122:3333/README.md
-#define HOST "192.168.125.122"
-#define PORT 3333
-
-// WiFi SSID to connect to
-#define WIFI_SSID "IoT"
-
-// 16 slots on esp32 (CONFIG_LWIP_MAX_ACTIVE_TCP)
-#define MAX_CLIENTS CONFIG_LWIP_MAX_ACTIVE_TCP
-// #define MAX_CLIENTS 1
-
-size_t permits = MAX_CLIENTS;
-
-void makeRequest() {
-  if (!permits) {
-    return;
-  }
-
-  Serial.printf("** permits: %d\n", permits);
-
-  AsyncClient *client = new AsyncClient;
-
-  client->onError([](void *arg, AsyncClient *client, int8_t error) {
-    Serial.printf("** error occurred %s \n", client->errorToString(error));
-    client->close(true);
-    delete client;
-  });
-
-  client->onConnect([](void *arg, AsyncClient *client) {
-    permits--;
-    Serial.printf("** client has been connected: %" PRIu16 "\n", client->localPort());
-
-    client->onDisconnect([](void *arg, AsyncClient *client) {
-      Serial.printf("** client has been disconnected: %" PRIu16 "\n", client->localPort());
-      client->close(true);
-      delete client;
-
-      permits++;
-      makeRequest();
-    });
-
-    client->onData([](void *arg, AsyncClient *client, void *data, size_t len) {
-      Serial.printf("** data received by client: %" PRIu16 ": len=%u\n", client->localPort(), len);
-    });
-
-    client->write("GET /README.md HTTP/1.1\r\nHost: " HOST "\r\nUser-Agent: ESP\r\nConnection: close\r\n\r\n");
-  });
-
-  if (client->connect(HOST, PORT)) {
-  } else {
-    Serial.println("** connection failed");
-  }
-}
-
-void setup() {
-  Serial.begin(115200);
-  while (!Serial) {
-    continue;
-  }
-
-  WiFi.mode(WIFI_STA);
-  WiFi.begin(WIFI_SSID);
-  while (WiFi.status() != WL_CONNECTED) {
-    delay(500);
-    Serial.print(".");
-  }
-  Serial.println("** connected to WiFi");
-  Serial.println(WiFi.localIP());
-
-  for (size_t i = 0; i < MAX_CLIENTS; i++) {
-    makeRequest();
-  }
-}
-
-void loop() {
-  delay(1000);
-  Serial.printf("** free heap: %" PRIu32 "\n", ESP.getFreeHeap());
-}

package/examples/basic/.pio/libdeps/esp32/AsyncTCP/examples/FetchWebsite/FetchWebsite.ino

@@ -1,107 +0,0 @@
-// SPDX-License-Identifier: LGPL-3.0-or-later
-// Copyright 2016-2025 Hristo Gochkov, Mathieu Carbou, Emil Muratov
-
-#include <Arduino.h>
-#include <AsyncTCP.h>
-#include <StreamString.h>
-#include <WiFi.h>
-
-#include <functional>
-#include <string>
-
-#define WIFI_SSID     "IoT"
-#define WIFI_PASSWORD ""
-
-void fetchAsync(const char *host, std::function<void(const StreamString *)> onDone) {
-  Serial.printf("[%s] Fetching: http://%s...\n", host, host);
-
-  // buffer where we will accumulate the received data
-  StreamString *content = new StreamString();
-
-  // reserve enough space to avoid reallocations
-  content->reserve(32 * 1024);
-
-  // create a new client
-  AsyncClient *client = new AsyncClient();
-
-  // register a callback when the client disconnects
-  client->onDisconnect([content, host, onDone](void *arg, AsyncClient *client) {
-    Serial.printf("[%s] Disconnected.\n", host);
-    onDone(content);
-    delete client;
-    delete content;
-  });
-
-  // register a callback when an error occurs
-  client->onError([host, onDone](void *arg, AsyncClient *client, int8_t error) {
-    Serial.printf("[%s] Error: %s\n", host, client->errorToString(error));
-  });
-
-  // register a callback when data arrives, to accumulate it
-  client->onData([host, content](void *arg, AsyncClient *client, void *data, size_t len) {
-    Serial.printf("[%s] Received %u bytes...\n", host, len);
-    content->write((const uint8_t *)data, len);
-  });
-
-  // register a callback when we are connected
-  client->onConnect([host](void *arg, AsyncClient *client) {
-    Serial.printf("[%s] Connected!\n", host);
-
-    // send request
-    client->write("GET / HTTP/1.1\r\n");
-    client->write("Host: ");
-    client->write(host);
-    client->write("\r\n");
-    client->write("User-Agent: ESP32\r\n");
-    client->write("Connection: close\r\n");
-    client->write("\r\n");
-  });
-
-  Serial.printf("[%s] Connecting...\n", host);
-
-  if (!client->connect(host, 80)) {
-    Serial.printf("[%s] Failed to connect!\n", host);
-    delete client;
-    delete content;
-    onDone(nullptr);
-  }
-}
-
-void setup() {
-  Serial.begin(115200);
-  while (!Serial) {
-    continue;
-  }
-
-  // connect to WiFi
-  WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
-  while (WiFi.status() != WL_CONNECTED) {
-    delay(500);
-  }
-  Serial.println("Connected to WiFi!");
-  Serial.println(WiFi.localIP());
-
-  // fetch asynchronously 2 websites:
-
-  // equivalent to curl -v --raw http://www.time.org/
-  fetchAsync("www.time.org", [](const StreamString *content) {
-    if (content) {
-      Serial.printf("[www.time.org] Fetched website:\n%s\n", content->c_str());
-    } else {
-      Serial.println("[www.time.org] Failed to fetch website!");
-    }
-  });
-
-  // equivalent to curl -v --raw http://www.google.com/
-  fetchAsync("www.google.com", [](const StreamString *content) {
-    if (content) {
-      Serial.printf("[www.google.com] Fetched website:\n%s\n", content->c_str());
-    } else {
-      Serial.println("[www.google.com] Failed to fetch website!");
-    }
-  });
-}
-
-void loop() {
-  delay(100);
-}

package/examples/basic/.pio/libdeps/esp32/AsyncTCP/library.json

@@ -1,31 +0,0 @@
-{
-  "name": "AsyncTCP",
-  "version": "3.4.9",
-  "description": "Asynchronous TCP Library for ESP32",
-  "keywords": "async,tcp",
-  "repository": {
-    "type": "git",
-    "url": "https://github.com/ESP32Async/AsyncTCP.git"
-  },
-  "authors":
-  {
-    "name": "ESP32Async",
-    "maintainer": true
-  },
-  "license": "LGPL-3.0",
-  "frameworks": "arduino",
-  "platforms": [
-    "espressif32",
-    "libretiny"
-  ],
-  "export": {
-    "include": [
-      "examples",
-      "src",
-      "library.json",
-      "library.properties",
-      "LICENSE",
-      "README.md"
-    ]
-  }
-}

package/examples/basic/.pio/libdeps/esp32/AsyncTCP/library.properties

@@ -1,11 +0,0 @@
-name=Async TCP
-includes=AsyncTCP.h
-version=3.4.9
-author=ESP32Async
-maintainer=ESP32Async
-sentence=Async TCP Library for ESP32
-paragraph=Async TCP Library for ESP32
-category=Other
-url=https://github.com/ESP32Async/AsyncTCP.git
-architectures=*
-license=LGPL-3.0