@alteriom/painlessmesh 1.7.4 → 1.7.5

package/examples/alteriom/.pio/libdeps/esp8266/TaskScheduler/src/TaskSchedulerSleepMethods.h

@@ -1,399 +0,0 @@
-/**
- * @file TaskSchedulerSleepMethods.h
- * @brief Platform-specific sleep method implementations for TaskScheduler library
- *
- * This file contains platform-specific implementations of the SleepMethod function
- * used by the TaskScheduler library for power management and idle state handling.
- * Each implementation is optimized for the specific microcontroller architecture
- * and its available low-power modes.
- *
- * The SleepMethod function is called by the scheduler when there are no tasks
- * ready to execute, allowing the system to enter a low-power state until the
- * next task becomes ready or an interrupt occurs.
- *
- * @note This file is automatically included by TaskScheduler.h when
- *       _TASK_SLEEP_ON_IDLE_RUN compilation option is enabled.
- *
- * @author Anatoli Arkhipenko
- * @copyright Copyright (c) 2015-2022 Anatoli Arkhipenko
- * @version 4.0.0
- *
- * Supported platforms:
- * - Arduino AVR (ATmega328P, ATmega32U4, etc.)
- * - Teensy (ARM Cortex-M4)
- * - ESP8266
- * - ESP32
- * - STM32F1 (libmaple)
- * - MSP432 (Energia)
- * - MSP430 (Energia)
- * - Generic/Default implementation
- */
-
-// Cooperative multitasking library for Arduino
-// Copyright (c) 2015-2022 Anatoli Arkhipenko
-
-#ifndef _TASKSCHEDULERSLEEPMETHODS_H_
-#define _TASKSCHEDULERSLEEPMETHODS_H_
-
-		
-#if defined( ARDUINO_ARCH_AVR ) // Could be used only for AVR-based boards.
-
-#include <avr/sleep.h>
-#include <avr/power.h>
-
-/**
- * @brief AVR-specific sleep method implementation using IDLE sleep mode
- *
- * This implementation uses the AVR's IDLE sleep mode which stops the CPU
- * but keeps all peripherals running. This allows timers to continue operating
- * and wake up the processor when needed. The sleep duration parameter is
- * ignored as the wake-up is controlled by timer interrupts.
- *
- * @param aDuration Duration parameter (ignored in AVR implementation)
- *                  Wake-up is controlled by timer interrupts (~1ms)
- *
- * @note Only available on Arduino AVR-based boards (ATmega328P, ATmega32U4, etc.)
- * @note Uses SLEEP_MODE_IDLE which provides the best balance between power savings
- *       and peripheral functionality for cooperative multitasking
- * @note Timer0 and other timers continue to run, maintaining millis() accuracy
- * @note Interrupts will wake the processor from sleep mode
- *
- * Power consumption:
- * - CPU: Stopped
- * - Flash: Operational
- * - SRAM: Operational
- * - Timers: Operational
- * - I/O pins: Operational
- *
- * @see set_sleep_mode()
- * @see sleep_enable()
- * @see sleep_mode()
- * @see sleep_disable()
- *
- * Example power savings:
- * - ATmega328P: ~15mA active → ~6mA idle (60% power reduction)
- * - ATmega32U4: ~20mA active → ~8mA idle (60% power reduction)
- */
-void SleepMethod( unsigned long aDuration ) {
-  set_sleep_mode(SLEEP_MODE_IDLE);
-  sleep_enable();
-  /* Now enter sleep mode. */
-  sleep_mode();
-
-  /* The program will continue from here after the timer timeout ~1 ms */
-  sleep_disable(); /* First thing to do is disable sleep. */
-}
-// ARDUINO_ARCH_AVR
-
-
-#elif defined( CORE_TEENSY )
-/**
- * @brief Teensy-specific sleep method using Wait For Interrupt (WFI)
- *
- * This implementation uses the ARM Cortex-M4 WFI (Wait For Interrupt) instruction
- * to put the processor into a low-power idle state. The processor will wake up
- * on any interrupt, including timer interrupts used by the TaskScheduler.
- *
- * @param aDuration Duration parameter (ignored in Teensy implementation)
- *                  Wake-up is controlled by interrupts
- *
- * @note Only available on Teensy boards (ARM Cortex-M4 based)
- * @note Uses the ARM Cortex-M4 WFI instruction for optimal power efficiency
- * @note All peripherals remain active and can generate wake-up interrupts
- * @note SysTick timer continues to run, maintaining millis() accuracy
- *
- * Power consumption:
- * - CPU core: Stopped
- * - System clock: Operational
- * - Peripherals: Operational
- * - RAM: Operational
- *
- * @see ARM Cortex-M4 Technical Reference Manual for WFI details
- *
- * Example power savings:
- * - Teensy 3.2: ~50mA active → ~20mA idle (60% power reduction)
- * - Teensy 4.0: ~100mA active → ~30mA idle (70% power reduction)
- */
-void SleepMethod( unsigned long aDuration ) {
-  asm("wfi");
-}
-//CORE_TEENSY
-
-
-#elif defined( ARDUINO_ARCH_ESP8266 )
-
-/**
- * @brief ESP8266 delay threshold for sleep optimization
- *
- * This threshold determines when to use a short delay instead of more complex
- * sleep operations. Values below this threshold trigger a 1ms delay which
- * allows the ESP8266's background WiFi operations to continue normally.
- *
- * @note Default value is 200 microseconds
- * @note Can be overridden by defining _TASK_ESP8266_DLY_THRESHOLD before including this file
- */
-#ifndef _TASK_ESP8266_DLY_THRESHOLD
-#define _TASK_ESP8266_DLY_THRESHOLD 200L
-#endif
-extern "C" {
-#include "user_interface.h"
-}
-
-/**
- * @brief ESP8266-specific sleep method with WiFi compatibility
- *
- * This implementation provides power management for ESP8266 while maintaining
- * WiFi connectivity and background operations. For short durations, it uses
- * delay(1) which yields to the ESP8266's system tasks including WiFi management.
- *
- * @param aDuration Duration in microseconds until next task execution
- *                  If less than _TASK_ESP8266_DLY_THRESHOLD, triggers delay(1)
- *
- * @note Only available on ESP8266 boards
- * @note Uses delay(1) for short durations to maintain WiFi connectivity
- * @note ESP8266's delay() implementation includes yield() calls for background tasks
- * @note Longer sleep modes are not implemented to preserve WiFi functionality
- *
- * @warning Deep sleep modes would disconnect WiFi and require reconnection
- * @warning Modem sleep interferes with cooperative multitasking timing
- *
- * Power management strategy:
- * - Short durations (< 200µs): Use delay(1) with background task yielding
- * - Longer durations: No additional sleep (preserves WiFi)
- *
- * @see _TASK_ESP8266_DLY_THRESHOLD
- * @see delay()
- * @see yield()
- *
- * Example usage scenarios:
- * - Web server applications maintaining client connections
- * - IoT devices with continuous WiFi connectivity requirements
- * - Real-time data streaming applications
- */
-void SleepMethod( unsigned long aDuration ) {
-// to do: find suitable sleep function for esp8266
-      if ( aDuration < _TASK_ESP8266_DLY_THRESHOLD) delay(1);   // ESP8266 implementation of delay() uses timers and yield
-}
-// ARDUINO_ARCH_ESP8266
-
-
-#elif defined( ARDUINO_ARCH_ESP32 )
-
-#include <esp_sleep.h>
-
-/**
- * @brief ESP32 delay threshold for sleep optimization
- *
- * This threshold determines when to use ESP32's light sleep mode versus
- * staying awake. Values below this threshold do not trigger sleep to
- * avoid the overhead of sleep/wake cycles for very short durations.
- *
- * @note Default value is 200 microseconds
- * @note Can be overridden by defining _TASK_ESP32_DLY_THRESHOLD before including this file
- */
-#ifndef _TASK_ESP32_DLY_THRESHOLD
-#define _TASK_ESP32_DLY_THRESHOLD 200L
-#endif
-extern unsigned long tStart, tFinish;
-/**
- * @brief Calculated remaining time threshold for sleep decisions
- *
- * This constant represents the effective sleep duration threshold after
- * accounting for the ESP32's sleep/wake overhead and the delay threshold.
- */
-const unsigned long tRem = 1000-_TASK_ESP32_DLY_THRESHOLD;
-
-/**
- * @brief ESP32-specific sleep method with light sleep capability
- *
- * This implementation is designed to use ESP32's light sleep mode for
- * power management while maintaining WiFi and Bluetooth connectivity.
- * Currently, the light sleep implementation is commented out pending
- * further testing and optimization.
- *
- * @param aDuration Duration in microseconds until next task execution
- *                  Used to determine if light sleep should be entered
- *
- * @note Only available on ESP32 boards
- * @note Light sleep implementation is currently disabled (commented out)
- * @note When enabled, uses timer wake-up to maintain precise timing
- * @note Preserves WiFi and Bluetooth connectivity during light sleep
- *
- * @todo Complete and test the light sleep implementation
- * @todo Verify compatibility with WiFi and Bluetooth operations
- * @todo Measure actual power savings vs. wake-up overhead
- *
- * Planned power management strategy:
- * - Short durations (< 800µs): Stay awake to avoid sleep overhead
- * - Longer durations: Enter light sleep with timer wake-up
- *
- * @see _TASK_ESP32_DLY_THRESHOLD
- * @see esp_sleep_enable_timer_wakeup()
- * @see esp_light_sleep_start()
- *
- * Expected power savings when implemented:
- * - Active: ~240mA (with WiFi)
- * - Light sleep: ~0.8mA (with WiFi maintained)
- * - Deep sleep: ~10µA (WiFi disconnected)
- */
-void SleepMethod( unsigned long aDuration ) {
-    // === NOT IMPLEMENTED ===
-    // if ( aDuration < tRem ) {
-    //     esp_sleep_enable_timer_wakeup((uint64_t) (1000 - aDuration));
-    //     esp_light_sleep_start();
-    // }
-}
-// ARDUINO_ARCH_ESP32
-
-
-#elif defined( ARDUINO_ARCH_STM32F1 )
-
-#include <libmaple/pwr.h>
-#include <libmaple/scb.h>
-
-/**
- * @brief STM32F1-specific sleep method using Wait For Interrupt
- *
- * This implementation uses the ARM Cortex-M3 WFI (Wait For Interrupt) instruction
- * to put the STM32F1 processor into a low-power state. The processor will wake up
- * on any interrupt, including the SysTick interrupt that runs every millisecond.
- *
- * @param aDuration Duration parameter (ignored in STM32F1 implementation)
- *                  Wake-up is controlled by interrupts, primarily SysTick
- *
- * @note Only available on STM32F1 boards using libmaple framework
- * @note Uses ARM Cortex-M3 WFI instruction for power management
- * @note SysTick interrupt continues to run every 1ms maintaining system timing
- * @note All peripherals remain operational and can generate wake-up interrupts
- * @note Could potentially use STOP mode for deeper power savings
- *
- * Power consumption:
- * - CPU core: Stopped
- * - System clock: Operational
- * - Peripherals: Operational
- * - RAM: Operational
- * - Flash: Operational
- *
- * @see ARM Cortex-M3 Technical Reference Manual for WFI details
- * @see libmaple power management documentation
- *
- * Example power savings:
- * - STM32F103: ~36mA active → ~15mA idle (58% power reduction)
- * - STM32F107: ~50mA active → ~20mA idle (60% power reduction)
- *
- * @todo Consider implementing STOP mode for deeper power savings
- * @todo Evaluate impact on peripheral timing and wake-up latency
- */
-void SleepMethod( unsigned long aDuration ) {
-	  // Now go into stop mode, wake up on interrupt.
-	  // Systick interrupt will run every 1 milliseconds.
-	  asm("    wfi");
-}
-// ARDUINO_ARCH_STM32
-
-
-#elif defined( ENERGIA_ARCH_MSP432 )
-
-/**
- * @brief MSP432-specific sleep method using delay
- *
- * This implementation uses a simple 1-millisecond delay for the MSP432
- * platform under the Energia framework. The delay allows other system
- * tasks to execute while providing a basic form of power management.
- *
- * @param aDuration Duration parameter (ignored in MSP432 implementation)
- *                  Fixed 1ms delay is used regardless of parameter
- *
- * @note Only available on MSP432 boards using Energia framework
- * @note Uses delay(1) which yields processor time to other tasks
- * @note Simple implementation prioritizing system stability over power optimization
- * @note Maintains system timing and peripheral operations
- *
- * Power management strategy:
- * - Uses Energia's delay() function which may include yield operations
- * - Provides basic power management without complex sleep modes
- * - Maintains compatibility with Energia framework expectations
- *
- * @see Energia delay() implementation
- * @see MSP432 power management capabilities
- *
- * @todo Investigate MSP432-specific low-power modes for better power efficiency
- * @todo Evaluate Energia framework support for advanced power management
- */
-void SleepMethod( unsigned long aDuration ) {
-    delay(1);
-}
-// ENERGIA_ARCH_MSP432
-
-
-#elif defined( ENERGIA_ARCH_MSP430 )
-
-/**
- * @brief MSP430-specific sleep method using Energia sleep function
- *
- * This implementation uses the Energia framework's sleep() function
- * which is specifically designed for MSP430 microcontrollers' advanced
- * low-power modes. The MSP430 family is well-known for its excellent
- * power management capabilities.
- *
- * @param aDuration Duration parameter (ignored in MSP430 implementation)
- *                  Fixed 1ms sleep is used regardless of parameter
- *
- * @note Only available on MSP430 boards using Energia framework
- * @note Uses Energia's sleep() function optimized for MSP430 power modes
- * @note MSP430 has excellent low-power capabilities (µA range in sleep modes)
- * @note Sleep function automatically selects appropriate low-power mode
- *
- * Power management features:
- * - Automatic low-power mode selection by Energia framework
- * - Maintains timer operations for accurate wake-up timing
- * - Preserves RAM contents during sleep
- * - Fast wake-up times (typically < 1µs)
- *
- * @see Energia sleep() function documentation
- * @see MSP430 Family User's Guide for low-power modes
- *
- * Expected power consumption:
- * - Active mode: ~1-3mA (depending on clock speed)
- * - LPM0 (sleep): ~85µA
- * - LPM3 (deep sleep): ~0.7µA
- * - LPM4 (off): ~0.1µA
- */
-void SleepMethod( unsigned long aDuration ) {
-    sleep(1);
-}
-// ENERGIA_ARCH_MSP430
-
-
-#else
-/**
- * @brief Default/generic sleep method implementation
- *
- * This is the default implementation used when no platform-specific
- * sleep method is available. It provides no power management functionality
- * but ensures the SleepMethod function exists for compilation compatibility.
- *
- * @param aDuration Duration parameter (ignored in default implementation)
- *                  No sleep or delay operations are performed
- *
- * @note Used for platforms without specific sleep method implementations
- * @note Provides compilation compatibility across all platforms
- * @note No power savings are achieved with this implementation
- * @note The scheduler will continue normal operation without idle power management
- *
- * @warning This implementation provides no power management benefits
- * @warning Consider implementing platform-specific sleep methods for power efficiency
- *
- * @see Platform-specific implementations above for power management examples
- *
- * Usage scenarios:
- * - Development and testing on unsupported platforms
- * - Applications where power management is not required
- * - Fallback for platforms with unknown or untested sleep capabilities
- */
-void SleepMethod( unsigned long aDuration ) {
-}
-
-#endif //  SLEEP METHODS
-
-#endif // _TASKSCHEDULERSLEEPMETHODS_H_

package/examples/alteriom/.pio/libdeps/esp8266/integrity.dat

@@ -1,3 +0,0 @@
-esp32async/ESPAsyncTCP
-arkhipenko/TaskScheduler
-bblanchon/ArduinoJson

package/examples/basic/.pio/build/esp32/lib241/TaskScheduler/TaskScheduler.cpp.d

@@ -1,2 +0,0 @@
-.pio/build/esp32/lib241/TaskScheduler/TaskScheduler.cpp.o: \
- .pio/libdeps/esp32/TaskScheduler/src/TaskScheduler.cpp

package/examples/basic/.pio/build/esp32/lib4f2/FS/FS.cpp.d

@@ -1,138 +0,0 @@
-.pio/build/esp32/lib4f2/FS/FS.cpp.o: \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/libraries/FS/src/FS.cpp \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/libraries/FS/src/FS.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp_arduino_version.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/FreeRTOS.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/esp_additions/freertos/FreeRTOSConfig.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_compiler.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/port/xtensa/include/freertos/FreeRTOSConfig_arch.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/port/xtensa/include/freertos/xtensa_config.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/hal.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/esp32/include/xtensa/config/core.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtensa-versions.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/esp32/include/xtensa/config/core-isa.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/esp32/include/xtensa/config/core-matmap.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/esp32/include/xtensa/config/tie.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/esp32/include/xtensa/config/system.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/port/xtensa/include/freertos/xtensa_context.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtensa_context.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/corebits.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtruntime-frames.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_rom/include/esp_rom_sys.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/esp32/include/soc/reset_reasons.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_rom/include/esp32/rom/ets_sys.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/projdefs.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/portable.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/deprecated_definitions.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/port/xtensa/include/freertos/portmacro.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtruntime.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/esp32/include/xtensa/config/specreg.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtruntime-core-state.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xt_instr_macros.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtruntime.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/soc/spinlock.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/soc/cpu.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_cpu.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/include/hal/cpu_hal.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_err.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_compiler.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/esp32/include/soc/soc_caps.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/include/hal/cpu_types.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/esp32/include/hal/cpu_ll.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_attr.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/esp32/include/xtensa/config/extreg.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_bit_defs.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/soc/compare_set.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/include/soc/soc_memory_types.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/esp32/include/soc/soc.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_assert.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_system/include/esp_private/crosscore_int.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_timer/include/esp_timer.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/newlib/platform_include/esp_newlib.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/heap/include/esp_heap_caps.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/heap/include/multi_heap.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_system/include/esp_system.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_idf_version.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_mac.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_chip_info.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_random.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/port/xtensa/include/freertos/portbenchmark.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtensa_api.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/xtensa/include/xtensa/xtensa_context.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/port/xtensa/include/freertos/portmacro_deprecated.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/mpu_wrappers.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/task.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/list.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/esp_additions/freertos/task_snapshot.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/semphr.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/queue.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/task.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_sleep.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/include/hal/touch_sensor_types.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/include/hal/gpio_types.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/include/soc/gpio_periph.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/esp32/include/soc/io_mux_reg.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/esp32/include/soc/gpio_struct.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/esp32/include/soc/gpio_reg.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/soc/esp32/include/soc/gpio_sig_map.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/queue.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/event_groups.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/freertos/include/freertos/timers.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-log.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/log/include/esp_log.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/log/include/esp_log_internal.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-matrix.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/include/hal/uart_types.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-gpio.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/variants/esp32/pins_arduino.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-touch.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-dac.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/driver/include/driver/gpio.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/esp_intr_alloc.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_common/include/esp_types.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_rom/include/esp32/rom/gpio.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-adc.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-spi.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-i2c.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-ledc.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-rmt.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-sigmadelta.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-timer.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-bt.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-psram.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-rgb-led.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-cpu.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp8266-compat.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/stdlib_noniso.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/binary.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/WCharacter.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/WString.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/pgmspace.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Stream.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Print.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Printable.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/IPAddress.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/WString.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Printable.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Client.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Server.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Udp.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Stream.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/IPAddress.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/HardwareSerial.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/HWCDC.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/USBCDC.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Esp.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/spi_flash/include/esp_partition.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/spi_flash/include/esp_flash.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/include/hal/spi_flash_types.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/include/hal/esp_flash_err.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/spi_flash/include/esp_spi_flash.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/spi_flash/include/esp_spi_flash_counters.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/esp_hw_support/include/soc/esp32/spiram.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/io_pin_remap.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h \
- C:/Users/sparc/.platformio/packages/framework-arduinoespressif32/libraries/FS/src/FSImpl.h