@alteriom/painlessmesh 1.7.4 → 1.7.5

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example27_PlatformIO/platformio.ini

@@ -1,37 +0,0 @@
-; PlatformIO Project Configuration File
-;
-;   Build options: build flags, source filter
-;   Upload options: custom upload port, speed and extra flags
-;   Library options: dependencies, extra library storages
-;   Advanced options: extra scripting
-;
-; Please visit documentation for the other options and examples
-; https://docs.platformio.org/page/projectconf.html
-
-[env:esp32dev]
-platform = espressif32
-board = esp32dev
-framework = arduino
-
-[env]
-lib_deps =
-    arkhipenko/TaskScheduler @ ^3.0.0
-    
-build_flags = 
-    ; -D _TASK_TIMECRITICAL       
-    -D _TASK_SLEEP_ON_IDLE_RUN  
-    -D _TASK_STATUS_REQUEST     
-    ; -D _TASK_WDT_IDS            
-    ; -D _TASK_LTS_POINTER        
-    ; -D _TASK_PRIORITY           
-    ; -D _TASK_MICRO_RES          
-    ; -D _TASK_STD_FUNCTION       
-    ; -D _TASK_DEBUG              
-    ; -D _TASK_INLINE             
-    ; -D _TASK_TIMEOUT            
-    ; -D _TASK_OO_CALLBACKS       
-    ; -D _TASK_EXPOSE_CHAIN       
-    ; -D _TASK_SCHEDULING_OPTIONS  
-    -D _TASK_HEADER_AND_CPP
-    -D _DEBUG_
-    ; -D _TEST_  

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example27_PlatformIO/src/led.cpp

@@ -1,11 +0,0 @@
-#include <Arduino.h>
-#include "led.h"
-#include "main.h"
-
-void LEDOn() {
-  digitalWrite( LED_BUILTIN, HIGH );
-}
-
-void LEDOff() {
-  digitalWrite( LED_BUILTIN, LOW );
-}

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example27_PlatformIO/src/main.cpp

@@ -1,254 +0,0 @@
-/*
-   Every example set must have a LED blink example
-   For this one the idea is to have as many ways to blink the LED
-   as I can think of. So, here we go.
-
-   Tested on:
-   - Arduino Nano
-   - ESP8266
-   - ESP32
-   - STM32 Maple Mini
-*/
-
-#include <TaskSchedulerDeclarations.h>
-
-#include "main.h"
-#include "led.h"
-
-// Scheduler
-Scheduler ts;
-
-/*
-   Approach 1: LED is driven by the boolean variable; false = OFF, true = ON
-*/
-void blink1CB();
-Task tBlink1 ( PERIOD1 * TASK_MILLISECOND, DURATION / PERIOD1, &blink1CB, &ts, true );
-
-/*
-   Approach 2: two callback methods: one turns ON, another turns OFF
-*/
-void blink2CB_ON();
-void blink2CB_OFF();
-Task tBlink2 ( PERIOD2 * TASK_MILLISECOND, DURATION / PERIOD2, &blink2CB_ON, &ts, false );
-
-/*
-   Approach 3: Use RunCounter
-*/
-void blink3CB();
-Task tBlink3 (PERIOD3 * TASK_MILLISECOND, DURATION / PERIOD3, &blink3CB, &ts, false);
-
-/*
-   Approach 4: Use status request objects to pass control from one task to the other
-*/
-bool blink41OE();
-void blink41();
-void blink42();
-void blink42OD();
-Task tBlink4On  ( PERIOD4 * TASK_MILLISECOND, TASK_ONCE, blink41, &ts, false, &blink41OE );
-Task tBlink4Off ( PERIOD4 * TASK_MILLISECOND, TASK_ONCE, blink42, &ts, false, NULL, &blink42OD );
-
-
-/*
-   Approach 5: Two interleaving tasks
-*/
-bool blink51OE();
-void blink51();
-void blink52();
-void blink52OD();
-Task tBlink5On  ( 600 * TASK_MILLISECOND, DURATION / PERIOD5, &blink51, &ts, false, &blink51OE );
-Task tBlink5Off ( 600 * TASK_MILLISECOND, DURATION / PERIOD5, &blink52, &ts, false, NULL, &blink52OD );
-
-
-/*
-   Approach 6: RunCounter-based with random intervals
-*/
-void blink6CB();
-bool blink6OE();
-void blink6OD();
-Task tBlink6 ( PERIOD6 * TASK_MILLISECOND, DURATION / PERIOD6, &blink6CB, &ts, false, &blink6OE, &blink6OD );
-
-void setup() {
-  // put your setup code here, to run once:
-#if defined(_DEBUG_) || defined(_TEST_)
-  Serial.begin(115200);
-  delay(TASK_SECOND);
-  _PL("TaskScheduler Blink example");
-  _PL("Blinking for 10 seconds using various techniques\n");
-  delay(2 * TASK_SECOND);
-#endif
-  pinMode(LED_BUILTIN, OUTPUT);
-}
-
-void loop() {
-  ts.execute();
-}
-
-// === 1 =======================================
-bool LED_state = false;
-void blink1CB() {
-  if ( tBlink1.isFirstIteration() ) {
-    _PP(millis());
-    _PL(": Blink1 - simple flag driven");
-    LED_state = false;
-  }
-
-  if ( LED_state ) {
-    LEDOff();
-    LED_state = false;
-  }
-  else {
-    LEDOn();
-    LED_state = true;
-  }
-
-  if ( tBlink1.isLastIteration() ) {
-    tBlink2.restartDelayed( 2 * TASK_SECOND );
-    LEDOff();
-  }
-}
-
-
-// === 2 ======================================
-void blink2CB_ON() {
-  if ( tBlink2.isFirstIteration() ) {
-    _PP(millis());
-    _PL(": Blink2 - 2 callback methods");
-  }
-
-  LEDOn();
-  tBlink2.setCallback( &blink2CB_OFF );
-
-  if ( tBlink2.isLastIteration() ) {
-    tBlink3.restartDelayed( 2 * TASK_SECOND );
-    LEDOff();
-  }
-}
-
-
-void blink2CB_OFF() {
-
-  LEDOff();
-  tBlink2.setCallback( &blink2CB_ON );
-
-  if ( tBlink2.isLastIteration() ) {
-    tBlink3.restartDelayed( 2 * TASK_SECOND );
-    LEDOff();
-  }
-}
-
-
-// === 3 =====================================
-void blink3CB() {
-  if ( tBlink3.isFirstIteration() ) {
-    _PP(millis());
-    _PL(": Blink3 - Run Counter driven");
-  }
-
-  if ( tBlink3.getRunCounter() & 1 ) {
-    LEDOn();
-  }
-  else {
-    LEDOff();
-  }
-
-  if ( tBlink3.isLastIteration() ) {
-    tBlink4On.setOnEnable( &blink41OE );
-    tBlink4On.restartDelayed( 2 * TASK_SECOND );
-    LEDOff();
-  }
-}
-
-
-// === 4 =============================================
-int counter = 0;
-bool blink41OE() {
-  _PP(millis());
-  _PL(": Blink4 - Internal status request based");
-  counter = 0;
-  tBlink4On.setOnEnable( NULL );
-  return true;
-}
-
-void blink41() {
-  //  _PP(millis());
-  //  _PL(": blink41");
-  LEDOn();
-  StatusRequest* r = tBlink4On.getInternalStatusRequest();
-  tBlink4Off.waitForDelayed( r );
-  counter++;
-}
-
-void blink42() {
-  //  _PP(millis());
-  //  _PL(": blink42");
-  LEDOff();
-  StatusRequest* r = tBlink4Off.getInternalStatusRequest();
-  tBlink4On.waitForDelayed( r );
-  counter++;
-}
-
-
-void blink42OD() {
-  if ( counter >= DURATION / PERIOD4 ) {
-    tBlink4On.disable();
-    tBlink4Off.disable();
-
-    tBlink5On.setOnEnable( &blink51OE );
-    tBlink5On.restartDelayed( 2 * TASK_SECOND );
-    tBlink5Off.restartDelayed( 2 * TASK_SECOND + PERIOD5 / 2 );
-    LEDOff();
-  }
-}
-
-
-// === 5 ==========================================
-bool blink51OE() {
-  _PP(millis());
-  _PL(": Blink5 - Two interleaving tasks");
-  tBlink5On.setOnEnable( NULL );
-  return true;
-}
-void blink51() {
-  //  _PP(millis());
-  //  _PL(": blink51");
-  LEDOn();
-}
-void blink52() {
-  //  _PP(millis());
-  //  _PL(": blink52");
-  LEDOff();
-}
-void blink52OD() {
-  tBlink6.restartDelayed( 2 * TASK_SECOND );
-  LEDOff();
-}
-
-
-// === 6 ============================================
-long interval6 = 0;
-bool blink6OE() {
-  _PP(millis());
-  _PP(": Blink6 - RunCounter + Random ON interval = ");
-  interval6 = random( 100, 901 );
-  tBlink6.setInterval( interval6 );
-  _PL( interval6 );
-  tBlink6.delay( 2 * TASK_SECOND );
-
-  return true;
-}
-
-void blink6CB() {
-  if ( tBlink6.getRunCounter() & 1 ) {
-    LEDOn();
-    tBlink6.setInterval( interval6 );
-  }
-  else {
-    LEDOff();
-    tBlink6.setInterval( TASK_SECOND - interval6 );
-  }
-}
-
-void blink6OD() {
-  tBlink1.restartDelayed( 2 * TASK_SECOND );
-  LEDOff();
-}

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example27_PlatformIO/test/README

@@ -1,11 +0,0 @@
-
-This directory is intended for PlatformIO Unit Testing and project tests.
-
-Unit Testing is a software testing method by which individual units of
-source code, sets of one or more MCU program modules together with associated
-control data, usage procedures, and operating procedures, are tested to
-determine whether they are fit for use. Unit testing finds problems early
-in the development cycle.
-
-More information about PlatformIO Unit Testing:
-- https://docs.platformio.org/page/plus/unit-testing.html

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example28_Tickless/Scheduler_example28_Tickless.ino

@@ -1,105 +0,0 @@
-/** 
- *  TaskScheduler Test
- * 
- *  This test illustrates how to use TS's tickless support functionality
- *  Tickless support enables more deterministic sleep by calculating time delay until next task invocation
- *  during every pass. That delay could then be used to put microcontroller in sleep mode continously
- *  instead of in small intervals
- *
- *  Initially only tasks 1 and 2 are enabled
- *  Task1 runs every 2 seconds 10 times and then stops
- *  Task2 runs every 3 seconds indefinitely
- *  Task1 enables Task3 at its first run
- *  Task3 run every 5 seconds
- *  Task1 disables Task3 on its last iteration and changed Task2 to run every 1/2 seconds
- *  At the end Task2 is the only task running every 1/2 seconds
- */
-
-#define _TASK_SLEEP_ON_IDLE_RUN  // Enable 1 ms SLEEP_IDLE powerdowns between runs if no callback methods were invoked during the pass
-#define _TASK_TICKLESS           // Enable support for tickless sleep on FreeRTOS
-#define _TASK_DO_NOT_YIELD       // Disable yield() method in execute() 
- 
-#include <TaskScheduler.h>
-
-// Callback methods prototypes
-void t1Callback();
-void t2Callback();
-void t3Callback();
-
-//Tasks
-Task t4();
-Task t1(2000, 10, &t1Callback);
-Task t2(3000, TASK_FOREVER, &t2Callback);
-Task t3(5000, TASK_FOREVER, &t3Callback);
-
-Scheduler runner;
-
-
-void t1Callback() {
-    Serial.print("t1: ");
-    Serial.println(millis());
-    
-    if (t1.isFirstIteration()) {
-      runner.addTask(t3);
-      t3.enable();
-      Serial.println("t1: enabled t3 and added to the chain");
-    }
-    
-    if (t1.isLastIteration()) {
-      t3.disable();
-      runner.deleteTask(t3);
-      t2.setInterval(500);
-      Serial.println("t1: disable t3 and delete it from the chain. t2 interval set to 500");
-    }
-}
-
-void t2Callback() {
-    Serial.print("t2: ");
-    Serial.println(millis());
-	
-	// comment this line out if you want to test t2's 500 ms explicit delay
-	// as-is this delay tests that task in catch up mode will prevent explicit tickless delay
-    delay(501);
-  
-}
-
-void t3Callback() {
-    Serial.print("t3: ");
-    Serial.println(millis());
-  
-}
-
-void setup () {
-  Serial.begin(115200);
-  Serial.println("Scheduler TEST");
-  
-  runner.init();
-  Serial.println("Initialized scheduler");
-  
-  runner.addTask(t1);
-  Serial.println("added t1");
-  
-  runner.addTask(t2);
-  Serial.println("added t2");
-
-  delay(1000);
-  
-  t1.enable();
-  Serial.println("Enabled t1");
-  t2.enable();
-  Serial.println("Enabled t2");
-}
-
-unsigned long nr = 0;
-void loop () {
-  runner.execute();
-  nr = runner.getNextRun();
-  if ( nr ) {
-    Serial.println("TS stats:");
-    Serial.print("\tTotal   tasks: "); Serial.println(runner.getTotalTasks() );
-    Serial.print("\tActive  tasks: "); Serial.println(runner.getActiveTasks() );
-    Serial.print("\tInvoked tasks: "); Serial.println(runner.getInvokedTasks() );
-    Serial.print("Next scheduling pass in "); Serial.print(nr); Serial.println(" ms");
-    delay(nr);
-  }
-}

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example29_NonArduino/include/README

@@ -1,39 +0,0 @@
-
-This directory is intended for project header files.
-
-A header file is a file containing C declarations and macro definitions
-to be shared between several project source files. You request the use of a
-header file in your project source file (C, C++, etc) located in `src` folder
-by including it, with the C preprocessing directive `#include'.
-
-```src/main.c
-
-#include "header.h"
-
-int main (void)
-{
- ...
-}
-```
-
-Including a header file produces the same results as copying the header file
-into each source file that needs it. Such copying would be time-consuming
-and error-prone. With a header file, the related declarations appear
-in only one place. If they need to be changed, they can be changed in one
-place, and programs that include the header file will automatically use the
-new version when next recompiled. The header file eliminates the labor of
-finding and changing all the copies as well as the risk that a failure to
-find one copy will result in inconsistencies within a program.
-
-In C, the usual convention is to give header files names that end with `.h'.
-It is most portable to use only letters, digits, dashes, and underscores in
-header file names, and at most one dot.
-
-Read more about using header files in official GCC documentation:
-
-* Include Syntax
-* Include Operation
-* Once-Only Headers
-* Computed Includes
-
-https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example29_NonArduino/include/led.h

@@ -1,12 +0,0 @@
-#ifndef _TS27_LED_H
-#define _TS27_LED_H
-
-// LED_BUILTIN  13
-#if defined( ARDUINO_ARCH_ESP32 )
-#define LED_BUILTIN  23 // esp32 dev2 kit does not have LED
-#endif
-
-void LEDOff();
-void LEDOn();
-
-#endif //   _TS27_LED_H

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example29_NonArduino/include/main.h

@@ -1,27 +0,0 @@
-#ifndef _TS27_MAIN_H
-#define _TS27_MAIN_H
-
-#include <Arduino.h>
-
-#ifdef _DEBUG_
-#define _PP(a) Serial.print(a);
-#define _PL(a) Serial.println(a);
-#else
-#define _PP(a)
-#define _PL(a)
-#endif
-
-#define PERIOD1 500
-#define DURATION 10000
-
-#define PERIOD2 400
-
-#define PERIOD3 300
-
-#define PERIOD4 200
-
-#define PERIOD5 600
-
-#define PERIOD6 300
-
-#endif

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example29_NonArduino/lib/README

@@ -1,46 +0,0 @@
-
-This directory is intended for project specific (private) libraries.
-PlatformIO will compile them to static libraries and link into executable file.
-
-The source code of each library should be placed in a an own separate directory
-("lib/your_library_name/[here are source files]").
-
-For example, see a structure of the following two libraries `Foo` and `Bar`:
-
-|--lib
-|  |
-|  |--Bar
-|  |  |--docs
-|  |  |--examples
-|  |  |--src
-|  |     |- Bar.c
-|  |     |- Bar.h
-|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
-|  |
-|  |--Foo
-|  |  |- Foo.c
-|  |  |- Foo.h
-|  |
-|  |- README --> THIS FILE
-|
-|- platformio.ini
-|--src
-   |- main.c
-
-and a contents of `src/main.c`:
-```
-#include <Foo.h>
-#include <Bar.h>
-
-int main (void)
-{
-  ...
-}
-
-```
-
-PlatformIO Library Dependency Finder will find automatically dependent
-libraries scanning project source files.
-
-More information about PlatformIO Library Dependency Finder
-- https://docs.platformio.org/page/librarymanager/ldf.html

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example29_NonArduino/platformio.ini

@@ -1,38 +0,0 @@
-; PlatformIO Project Configuration File
-;
-;   Build options: build flags, source filter
-;   Upload options: custom upload port, speed and extra flags
-;   Library options: dependencies, extra library storages
-;   Advanced options: extra scripting
-;
-; Please visit documentation for the other options and examples
-; https://docs.platformio.org/page/projectconf.html
-
-[env:esp32dev]
-platform = espressif32
-board = esp32dev
-framework = arduino
-
-[env]
-lib_deps =
-    arkhipenko/TaskScheduler @ ^3.0.0
-    
-build_flags = 
-    ; -D _TASK_TIMECRITICAL       
-    -D _TASK_SLEEP_ON_IDLE_RUN  
-    -D _TASK_STATUS_REQUEST     
-    ; -D _TASK_WDT_IDS            
-    ; -D _TASK_LTS_POINTER        
-    ; -D _TASK_PRIORITY           
-    ; -D _TASK_MICRO_RES          
-    ; -D _TASK_STD_FUNCTION       
-    ; -D _TASK_DEBUG              
-    ; -D _TASK_INLINE             
-    ; -D _TASK_TIMEOUT            
-    ; -D _TASK_OO_CALLBACKS       
-    ; -D _TASK_EXPOSE_CHAIN       
-    ; -D _TASK_SCHEDULING_OPTIONS  
-    -D _TASK_HEADER_AND_CPP
-    -D _TASK_NON_ARDUINO
-    -D _DEBUG_
-    ; -D _TEST_  

package/examples/alteriom/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example29_NonArduino/src/led.cpp

@@ -1,13 +0,0 @@
-// #include <Arduino.h>
-#include "led.h"
-#include "main.h"
-
-void LEDOn() {
-  // printf("LED On\n");
-  // digitalWrite( LED_BUILTIN, HIGH );
-}
-
-void LEDOff() {
-  // printf("LED Off\n");
-  // digitalWrite( LED_BUILTIN, LOW );
-}