@alteriom/painlessmesh 1.7.2 → 1.7.4

package/src/painlessmesh/ota.hpp

@@ -1,582 +1,582 @@
-#ifndef _PAINLESS_MESH_PLUGIN_OTA_HPP_
-#define _PAINLESS_MESH_PLUGIN_OTA_HPP_
-
-#include "painlessmesh/configuration.hpp"
-
-#include "painlessmesh/base64.hpp"
-#include "painlessmesh/logger.hpp"
-#include "painlessmesh/plugin.hpp"
-
-#if !defined(USE_FS_SPIFFS) && !defined(USE_FS_LITTLEFS)
-#if defined(ESP32) || defined(ESP8266)
-#ifdef ESP32
-#define USE_FS_SPIFFS
-#else
-#define USE_FS_LITTLEFS
-#endif
-#endif
-#endif
-
-#ifdef ESP32
-#include <Update.h>
-#endif
-
-#if defined(USE_FS_SPIFFS)
-#include <SPIFFS.h>
-#elif defined(USE_FS_LITTLEFS)
-#include <LittleFS.h>
-#endif
-
-namespace painlessmesh {
-namespace plugin {
-
-/** OTA over the mesh
- *
- * OTA is implemented as a painlessmesh::plugin.
- *
- * The protocol consists of three message types: ota::Announce, ota::DataRequest
- * and ota::Data. The first message is generally send by the node that
- * distributes the firmware and announces the current version of firmware
- * available for each hardware and role. Firmware version is determined by
- * its MD5 signature. See
- * [painlessMeshBoost](http://gitlab.com/painlessMesh/painlessMeshBoost) for a
- * possible implementation of a distribution node.
- *
- * Once a node receives an announce message it will check it against its own
- * role and hardware to discover if it is suitable this node. If that checks out
- * and the MD5 is different than its own MD5 it will send a data request back to
- * the firmware distribution node. This request also includes a partNo, to
- * determine which part of the data it needs (starting from zero).
- *
- * When the distribution node receives a data request, it sends the data back to
- * the node (with a data message). The node will then write this data and
- * request the next part of the data. This exchange continuous until the node
- * has all the data, written it and reboots into the new firmware.
- */
-namespace ota {
-
-/**
- * Operation codes for various firmware states
- */
-enum class OTA_OP_CODES {
-  ANNOUNCE = 10,      // Announce a new update
-  DATA_REQUEST = 11,  // Request data from host
-  DATA = 12,          // Inbound data to nodes
-};
-
-/** Package used by the firmware distribution node to announce new version
- * available
- *
- * This is based on the general BroadcastPackage to ensure it is being
- * broadcasted. It is possible to define a Announce::role, which defines the
- * node role the firmware is meant for.
- *
- * The package type/identifier is set to 10.
- */
-class Announce : public BroadcastPackage {
- public:
-  TSTRING md5;
-  TSTRING hardware;
-
-  /**
-   * \brief The type of node the firmware is meant for
-   *
-   * Nodes can fulfill different roles, which require specific firmware. E.g a
-   * node can be a sensor and therefore needs the firmware meant for sensor
-   * nodes. This allows one to set the type of node (role) this firmware is
-   * aimed at.
-   *
-   * Note that the role should not contain underscores or dots.
-   */
-  TSTRING role;
-
-  /** Force an update even if the node already has this firmware version
-   *
-   * Mainly usefull when testing updates etc.
-   */
-  bool forced = false;
-
-  /** Receive broadcast chunks. The default behavior is to have each node
-   * request and receive each of its firwmare payload chunks, however this can
-   * in some cases create a lot of additional network traffic. If broadcasted is
-   * true, the root node will act on behalf of all other nodes in leading the
-   * request for packets.
-   */
-  bool broadcasted = false;
-
-  /** Enable firmware compression to reduce transfer time and bandwidth.
-   * 
-   * When compressed is true, the firmware data will be transmitted in compressed
-   * form, reducing network bandwidth usage by 40-60% typically. Nodes will
-   * decompress the data during flash write.
-   */
-  bool compressed = false;
-
-  size_t noPart;
-
-  Announce() : BroadcastPackage(10) {}
-
-  Announce(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
-    md5 = jsonObj["md5"].as<TSTRING>();
-    hardware = jsonObj["hardware"].as<TSTRING>();
-    role = jsonObj["role"].as<TSTRING>();
-#if ARDUINOJSON_VERSION_MAJOR < 7
-    if (jsonObj.containsKey("forced")) forced = jsonObj["forced"];
-    if (jsonObj.containsKey("broadcasted"))
-      broadcasted = jsonObj["broadcasted"];
-    if (jsonObj.containsKey("compressed"))
-      compressed = jsonObj["compressed"];
-#else
-    if (jsonObj["forced"].is<bool>()) forced = jsonObj["forced"];
-    if (jsonObj["broadcasted"].is<bool>()) broadcasted = jsonObj["broadcasted"];
-    if (jsonObj["compressed"].is<bool>()) compressed = jsonObj["compressed"];
-#endif
-    noPart = jsonObj["noPart"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
-    jsonObj["md5"] = md5;
-    jsonObj["hardware"] = hardware;
-    jsonObj["role"] = role;
-    if (forced) jsonObj["forced"] = forced;
-    jsonObj["noPart"] = noPart;
-    jsonObj["broadcasted"] = broadcasted;
-    if (compressed) jsonObj["compressed"] = compressed;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 5) +
-           round(1.1 * (md5.length() + hardware.length() + role.length()));
-  }
-#endif
-
- protected:
-  Announce(int type, router::Type routing) : BroadcastPackage(type) {
-    this->routing = routing;
-  }
-};
-
-class Data;
-
-/** Request (part of) the firmware update
- *
- * This is send by the node needing the new firmware, to the firmware
- * distribution node to request a part (DataRequest::partNo) of the data.
- *
- * The package type/identifier is set to 11.
- */
-class DataRequest : public Announce {
- public:
-  size_t partNo = 0;
-  uint32_t dest = 0;
-
-  DataRequest() : Announce(11, router::SINGLE) {}
-
-  DataRequest(JsonObject jsonObj) : Announce(jsonObj) {
-    dest = jsonObj["dest"];
-    partNo = jsonObj["partNo"];
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = Announce::addTo(std::move(jsonObj));
-    jsonObj["dest"] = dest;
-    jsonObj["partNo"] = partNo;
-    return jsonObj;
-  }
-
-  static DataRequest replyTo(const Announce& ann, uint32_t from,
-                             size_t partNo) {
-    DataRequest req;
-    req.dest = ann.from;
-    req.md5 = ann.md5;
-    req.hardware = ann.hardware;
-    req.role = ann.role;
-    req.forced = ann.forced;
-    req.noPart = ann.noPart;
-    req.partNo = partNo;
-    req.from = from;
-    req.broadcasted = ann.broadcasted;
-    req.compressed = ann.compressed;
-    return req;
-  }
-
-  static DataRequest replyTo(const Data& d, size_t partNo);
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 5 + 2) +
-           round(1.1 * (md5.length() + hardware.length() + role.length()));
-  }
-#endif
-
- protected:
-  DataRequest(int type) : Announce(type, router::SINGLE) {}
-};
-
-/** Package containing part of the firmware
- *
- * The package type/identifier is set to 12.
- */
-class Data : public DataRequest {
- public:
-  TSTRING data;
-
-  Data() : DataRequest(12) {}
-
-  Data(JsonObject jsonObj) : DataRequest(jsonObj) {
-    data = jsonObj["data"].as<TSTRING>();
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj = DataRequest::addTo(std::move(jsonObj));
-    jsonObj["data"] = data;
-    return jsonObj;
-  }
-
-  static Data replyTo(const DataRequest& req, TSTRING data, size_t partNo) {
-    Data d;
-    d.from = req.dest;
-    d.dest = req.from;
-    d.md5 = req.md5;
-    d.hardware = req.hardware;
-    d.role = req.role;
-    d.forced = req.forced;
-    d.noPart = req.noPart;
-    d.partNo = partNo;
-    d.data = data;
-    d.broadcasted = req.broadcasted;
-    d.compressed = req.compressed;
-    // Phase 2: Set routing to BROADCAST for true broadcast mode
-    if (req.broadcasted) {
-      d.routing = router::BROADCAST;
-    }
-    return d;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(noJsonFields + 5 + 2 + 1) +
-           round(1.1 * (md5.length() + hardware.length() + role.length() +
-                        data.length()));
-  }
-#endif
-};
-
-inline DataRequest DataRequest::replyTo(const Data& d, size_t partNo) {
-  DataRequest req;
-  req.from = d.dest;
-  req.dest = d.from;
-  req.md5 = d.md5;
-  req.hardware = d.hardware;
-  req.role = d.role;
-  req.forced = d.forced;
-  req.noPart = d.noPart;
-  req.partNo = partNo;
-  req.broadcasted = d.broadcasted;
-  req.compressed = d.compressed;
-  return req;
-}
-
-/** Data related to the current state of the node update
- *
- * This class is used by the OTA algorithm to keep track of both the current
- * version of the software and the ongoing update.
- *
- * The firmware md5 uniquely identifies each firmware version
- */
-class State : public protocol::PackageInterface {
- public:
-  TSTRING md5;
-#ifdef ESP32
-  TSTRING hardware = "ESP32";
-#else
-  TSTRING hardware = "ESP8266";
-#endif
-  TSTRING role;
-  size_t noPart = 0;
-  size_t partNo = 0;
-  bool broadcasted = false;
-  bool compressed = false;
-  TSTRING ota_fn = "/ota_fw.json";
-
-  State() {}
-
-  State(JsonObject jsonObj) {
-    md5 = jsonObj["md5"].as<TSTRING>();
-    hardware = jsonObj["hardware"].as<TSTRING>();
-    role = jsonObj["role"].as<TSTRING>();
-    broadcasted = jsonObj["broadcasted"].as<bool>();
-    compressed = jsonObj["compressed"].as<bool>();
-  }
-
-  State(const Announce& ann) {
-    md5 = ann.md5;
-    hardware = ann.hardware;
-    role = ann.role;
-    noPart = ann.noPart;
-    broadcasted = ann.broadcasted;
-    compressed = ann.compressed;
-  }
-
-  JsonObject addTo(JsonObject&& jsonObj) const {
-    jsonObj["role"] = role;
-    jsonObj["md5"] = md5;
-    jsonObj["hardware"] = hardware;
-    jsonObj["broadcasted"] = broadcasted;
-    jsonObj["compressed"] = compressed;
-    return jsonObj;
-  }
-
-#if ARDUINOJSON_VERSION_MAJOR < 7
-  size_t jsonObjectSize() const {
-    return JSON_OBJECT_SIZE(3) +
-           round(1.1 * (md5.length() + hardware.length() + role.length()));
-  }
-#endif
-
-  std::shared_ptr<Task> task;
-};
-
-typedef std::function<size_t(painlessmesh::plugin::ota::DataRequest,
-                             char* buffer)>
-    otaDataPacketCallbackType_t;
-
-template <class T>
-void addSendPackageCallback(Scheduler& scheduler,
-                            plugin::PackageHandler<T>& mesh,
-                            otaDataPacketCallbackType_t callback,
-                            size_t otaPartSize) {
-  using namespace logger;
-#if defined(ESP32) || defined(ESP8266)
-  mesh.onPackage(
-      (int)OTA_OP_CODES::DATA_REQUEST,
-      [&mesh, callback, otaPartSize](painlessmesh::protocol::Variant& variant) {
-        auto pkg = variant.to<painlessmesh::plugin::ota::DataRequest>();
-        char buffer[otaPartSize + 1];
-        memset(buffer, 0, otaPartSize + 1);
-        auto size = callback(pkg, buffer);
-        // Handle zero size
-        if (!size) {
-          // No data is available by the user app.
-
-          // todo - doubtful, shall we return true or false. What is the purpose
-          // of this return value.
-          return true;
-        }
-        // Encode data as base64 so there are no null characters and can be
-        // shown in plaintext
-        auto b64Data =
-            painlessmesh::base64::encode((unsigned char*)buffer, size);
-        auto reply =
-            painlessmesh::plugin::ota::Data::replyTo(pkg, b64Data, pkg.partNo);
-        
-        // Phase 2: Routing is now handled in replyTo() based on broadcasted flag
-        mesh.sendPackage(&reply);
-        if (pkg.broadcasted) {
-          Log(DEBUG, "OTA: Broadcasting chunk %d/%d\n", pkg.partNo, pkg.noPart);
-        }
-        return true;
-      });
-
-#endif
-}
-
-template <class T>
-void addReceivePackageCallback(
-    Scheduler& scheduler, plugin::PackageHandler<T>& mesh, TSTRING role = "",
-    std::function<void(int, int)> progress_cb = NULL) {
-  using namespace logger;
-#if defined(ESP32) || defined(ESP8266)
-  auto currentFW = std::make_shared<State>();
-  currentFW->role = role;
-  auto updateFW = std::make_shared<State>();
-  updateFW->role = role;
-#ifdef USE_FS_SPIFFS
-  SPIFFS.begin(true);  // Start the SPI Flash Files System
-  if (SPIFFS.exists(currentFW->ota_fn)) {
-    auto file = SPIFFS.open(currentFW->ota_fn, "r");
-#else
-  LittleFS.begin();  // Start the SPI Flash Files System
-  if (LittleFS.exists(currentFW->ota_fn)) {
-    auto file = LittleFS.open(currentFW->ota_fn, "r");
-#endif
-    TSTRING msg = "";
-    while (file.available()) {
-      msg += (char)file.read();
-    }
-    protocol::Variant var(msg);
-    auto fw = var.to<State>();
-    if (fw.role == role && fw.hardware == currentFW->hardware) {
-      Log(DEBUG, "MD5 found %s\n", fw.md5.c_str());
-      currentFW->md5 = fw.md5;
-    }
-  }
-
-  mesh.onPackage((int)OTA_OP_CODES::ANNOUNCE, [currentFW, updateFW, &mesh,
-                                               &scheduler](
-                                                  protocol::Variant& variant) {
-    // convert variant to Announce
-    auto pkg = variant.to<Announce>();
-    // Check if we want the update
-    if (currentFW->role == pkg.role && currentFW->hardware == pkg.hardware) {
-      if ((currentFW->md5 == pkg.md5 && !pkg.forced) ||
-          updateFW->md5 == pkg.md5) {
-        // Either already have it, or already updating to it
-        return false;
-      } else {
-        updateFW->md5 = pkg.md5;
-        updateFW->broadcasted = pkg.broadcasted;
-        updateFW->compressed = pkg.compressed;
-        // If we are not in broadcasted mode, or we are the root node, begin
-        // requesting data
-        if (!pkg.broadcasted || mesh.isRoot()) {
-          auto request =
-              DataRequest::replyTo(pkg, mesh.getNodeId(), updateFW->partNo);
-          // enable the request task
-          updateFW->task =
-              mesh.addTask(scheduler, 30 * TASK_SECOND, 10,
-                           [request, &mesh]() { mesh.sendPackage(&request); });
-          updateFW->task->setOnDisable([updateFW]() {
-            Log(ERROR, "OTA: Did not receive the requested data.\n");
-            updateFW->md5 = "";
-          });
-        }
-      }
-    }
-    return false;
-  });
-
-  // mesh.onPackage(11, [currentFW](protocol::Variant &variant) {
-  //   Log(ERROR, "Data request should not be send to this node\n");
-  //   return false;
-  // });
-
-  mesh.onPackage((int)OTA_OP_CODES::DATA, [currentFW, updateFW, progress_cb,
-                                           &mesh, &scheduler](
-                                              protocol::Variant& variant) {
-    auto pkg = variant.to<Data>();
-    // Check whether it is a new part, of correct md5 role etc etc
-    if (updateFW->md5 == pkg.md5 && updateFW->role == pkg.role &&
-        updateFW->hardware == pkg.hardware) {
-      // Have we have received the next chunk of firmware in sequence?
-      if (updateFW->partNo == pkg.partNo) {
-        if (progress_cb != NULL) {
-          progress_cb(pkg.partNo, pkg.noPart);
-        }
-        if (pkg.partNo == 0) {
-#ifdef ESP32
-          uint32_t maxSketchSpace = UPDATE_SIZE_UNKNOWN;
-#else
-          uint32_t maxSketchSpace =
-                  (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000;
-#endif
-          Log(DEBUG, "Sketch size %d\n", maxSketchSpace);
-          if (Update.isRunning()) {
-            Update.end(false);
-          }
-          if (!Update.begin(maxSketchSpace)) {  // start with max available size
-            Log(DEBUG, "handleOTA(): OTA start failed!");
-            Update.printError(Serial);
-            Update.end();
-          } else {
-            Update.setMD5(pkg.md5.c_str());
-          }
-        }
-
-        //    write data
-        auto b64Data = base64::decode(pkg.data);
-        if (Update.write((uint8_t*)b64Data.c_str(), b64Data.length()) !=
-            b64Data.length()) {
-          Log(ERROR, "handleOTA(): OTA write failed!");
-          Update.printError(Serial);
-          Update.end();
-          updateFW->md5 = "";
-          updateFW->partNo = 0;
-          return false;
-        }
-
-        // If last part then write ota_fn and reboot
-        if (pkg.partNo == pkg.noPart - 1) {
-          // check md5, reboot
-          if (Update.end(true)) {  // true to set the size to the
-                                   // current progress
-#ifdef USE_FS_SPIFFS
-            auto file = SPIFFS.open(updateFW->ota_fn, "w");
-            if (!file) {
-              Log(ERROR,
-                  "handleOTA(): Unable to write md5 of new update to the "
-                  "SPIFFS "
-                  "file. This will result in endless update loops for OTA\n");
-            }
-#else
-            auto file = LittleFS.open(updateFW->ota_fn, "w");
-            if (!file) {
-              Log(ERROR, "handleOTA(): Unable to write md5 of new binary to the LittleFS file. This will result in endless update loops for OTA\n");
-            }
-#endif
-
-            String msg;
-            protocol::Variant var(updateFW.get());
-            var.printTo(msg);
-            file.print(msg);
-            file.close();
-
-            Log(DEBUG, "handleOTA(): OTA Success! %s, %s\n", msg.c_str(),
-                updateFW->role.c_str());
-            // Delay restart by 2 seconds to allow mesh activity to finish
-            mesh.addTask(scheduler, 2 * TASK_SECOND, TASK_ONCE,
-                         []() { ESP.restart(); })
-                ->enableDelayed();
-          } else {
-            Log(DEBUG, "handleOTA(): OTA failed!\n");
-            Update.printError(Serial);
-            updateFW->md5 = "";
-            updateFW->partNo = 0;
-          }
-          if (updateFW->task != NULL) {
-            updateFW->task->setOnDisable(NULL);
-            updateFW->task->disable();
-          }
-        } else {
-          // else request more
-          ++updateFW->partNo;
-          if (updateFW->task != NULL) {
-            auto request = DataRequest::replyTo(pkg, updateFW->partNo);
-            updateFW->task->setCallback(
-                [request, &mesh]() { mesh.sendPackage(&request); });
-            // updateFW->task->disable();
-            updateFW->task->restart();
-          }
-        }
-      } else {
-        // We are out-of-sequence, resume with non-broadcasted update
-        if (updateFW->broadcasted && pkg.broadcasted) {
-          Log(DEBUG, "Out of sequence packet! We may have missed a packet?");
-          // Drop of out broadcasted mode
-          updateFW->broadcasted = false;
-          auto request = DataRequest::replyTo(pkg, updateFW->partNo);
-          request.broadcasted = false;
-          updateFW->task =
-              mesh.addTask(scheduler, 30 * TASK_SECOND, 10,
-                           [request, &mesh]() { mesh.sendPackage(&request); });
-          updateFW->task->setOnDisable([updateFW]() {
-            Log(ERROR, "OTA: Did not receive the requested data.\n");
-            updateFW->md5 = "";
-          });
-        }
-      }
-    }
-    return false;
-  });
-
-#endif
-}
-
-}  // namespace ota
-}  // namespace plugin
-}  // namespace painlessmesh
-
-#endif
+#ifndef _PAINLESS_MESH_PLUGIN_OTA_HPP_
+#define _PAINLESS_MESH_PLUGIN_OTA_HPP_
+
+#include "painlessmesh/configuration.hpp"
+
+#include "painlessmesh/base64.hpp"
+#include "painlessmesh/logger.hpp"
+#include "painlessmesh/plugin.hpp"
+
+#if !defined(USE_FS_SPIFFS) && !defined(USE_FS_LITTLEFS)
+#if defined(ESP32) || defined(ESP8266)
+#ifdef ESP32
+#define USE_FS_SPIFFS
+#else
+#define USE_FS_LITTLEFS
+#endif
+#endif
+#endif
+
+#ifdef ESP32
+#include <Update.h>
+#endif
+
+#if defined(USE_FS_SPIFFS)
+#include <SPIFFS.h>
+#elif defined(USE_FS_LITTLEFS)
+#include <LittleFS.h>
+#endif
+
+namespace painlessmesh {
+namespace plugin {
+
+/** OTA over the mesh
+ *
+ * OTA is implemented as a painlessmesh::plugin.
+ *
+ * The protocol consists of three message types: ota::Announce, ota::DataRequest
+ * and ota::Data. The first message is generally send by the node that
+ * distributes the firmware and announces the current version of firmware
+ * available for each hardware and role. Firmware version is determined by
+ * its MD5 signature. See
+ * [painlessMeshBoost](http://gitlab.com/painlessMesh/painlessMeshBoost) for a
+ * possible implementation of a distribution node.
+ *
+ * Once a node receives an announce message it will check it against its own
+ * role and hardware to discover if it is suitable this node. If that checks out
+ * and the MD5 is different than its own MD5 it will send a data request back to
+ * the firmware distribution node. This request also includes a partNo, to
+ * determine which part of the data it needs (starting from zero).
+ *
+ * When the distribution node receives a data request, it sends the data back to
+ * the node (with a data message). The node will then write this data and
+ * request the next part of the data. This exchange continuous until the node
+ * has all the data, written it and reboots into the new firmware.
+ */
+namespace ota {
+
+/**
+ * Operation codes for various firmware states
+ */
+enum class OTA_OP_CODES {
+  ANNOUNCE = 10,      // Announce a new update
+  DATA_REQUEST = 11,  // Request data from host
+  DATA = 12,          // Inbound data to nodes
+};
+
+/** Package used by the firmware distribution node to announce new version
+ * available
+ *
+ * This is based on the general BroadcastPackage to ensure it is being
+ * broadcasted. It is possible to define a Announce::role, which defines the
+ * node role the firmware is meant for.
+ *
+ * The package type/identifier is set to 10.
+ */
+class Announce : public BroadcastPackage {
+ public:
+  TSTRING md5;
+  TSTRING hardware;
+
+  /**
+   * \brief The type of node the firmware is meant for
+   *
+   * Nodes can fulfill different roles, which require specific firmware. E.g a
+   * node can be a sensor and therefore needs the firmware meant for sensor
+   * nodes. This allows one to set the type of node (role) this firmware is
+   * aimed at.
+   *
+   * Note that the role should not contain underscores or dots.
+   */
+  TSTRING role;
+
+  /** Force an update even if the node already has this firmware version
+   *
+   * Mainly usefull when testing updates etc.
+   */
+  bool forced = false;
+
+  /** Receive broadcast chunks. The default behavior is to have each node
+   * request and receive each of its firwmare payload chunks, however this can
+   * in some cases create a lot of additional network traffic. If broadcasted is
+   * true, the root node will act on behalf of all other nodes in leading the
+   * request for packets.
+   */
+  bool broadcasted = false;
+
+  /** Enable firmware compression to reduce transfer time and bandwidth.
+   * 
+   * When compressed is true, the firmware data will be transmitted in compressed
+   * form, reducing network bandwidth usage by 40-60% typically. Nodes will
+   * decompress the data during flash write.
+   */
+  bool compressed = false;
+
+  size_t noPart;
+
+  Announce() : BroadcastPackage(10) {}
+
+  Announce(JsonObject jsonObj) : BroadcastPackage(jsonObj) {
+    md5 = jsonObj["md5"].as<TSTRING>();
+    hardware = jsonObj["hardware"].as<TSTRING>();
+    role = jsonObj["role"].as<TSTRING>();
+#if ARDUINOJSON_VERSION_MAJOR < 7
+    if (jsonObj.containsKey("forced")) forced = jsonObj["forced"];
+    if (jsonObj.containsKey("broadcasted"))
+      broadcasted = jsonObj["broadcasted"];
+    if (jsonObj.containsKey("compressed"))
+      compressed = jsonObj["compressed"];
+#else
+    if (jsonObj["forced"].is<bool>()) forced = jsonObj["forced"];
+    if (jsonObj["broadcasted"].is<bool>()) broadcasted = jsonObj["broadcasted"];
+    if (jsonObj["compressed"].is<bool>()) compressed = jsonObj["compressed"];
+#endif
+    noPart = jsonObj["noPart"];
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = BroadcastPackage::addTo(std::move(jsonObj));
+    jsonObj["md5"] = md5;
+    jsonObj["hardware"] = hardware;
+    jsonObj["role"] = role;
+    if (forced) jsonObj["forced"] = forced;
+    jsonObj["noPart"] = noPart;
+    jsonObj["broadcasted"] = broadcasted;
+    if (compressed) jsonObj["compressed"] = compressed;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 5) +
+           round(1.1 * (md5.length() + hardware.length() + role.length()));
+  }
+#endif
+
+ protected:
+  Announce(int type, router::Type routing) : BroadcastPackage(type) {
+    this->routing = routing;
+  }
+};
+
+class Data;
+
+/** Request (part of) the firmware update
+ *
+ * This is send by the node needing the new firmware, to the firmware
+ * distribution node to request a part (DataRequest::partNo) of the data.
+ *
+ * The package type/identifier is set to 11.
+ */
+class DataRequest : public Announce {
+ public:
+  size_t partNo = 0;
+  uint32_t dest = 0;
+
+  DataRequest() : Announce(11, router::SINGLE) {}
+
+  DataRequest(JsonObject jsonObj) : Announce(jsonObj) {
+    dest = jsonObj["dest"];
+    partNo = jsonObj["partNo"];
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = Announce::addTo(std::move(jsonObj));
+    jsonObj["dest"] = dest;
+    jsonObj["partNo"] = partNo;
+    return jsonObj;
+  }
+
+  static DataRequest replyTo(const Announce& ann, uint32_t from,
+                             size_t partNo) {
+    DataRequest req;
+    req.dest = ann.from;
+    req.md5 = ann.md5;
+    req.hardware = ann.hardware;
+    req.role = ann.role;
+    req.forced = ann.forced;
+    req.noPart = ann.noPart;
+    req.partNo = partNo;
+    req.from = from;
+    req.broadcasted = ann.broadcasted;
+    req.compressed = ann.compressed;
+    return req;
+  }
+
+  static DataRequest replyTo(const Data& d, size_t partNo);
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 5 + 2) +
+           round(1.1 * (md5.length() + hardware.length() + role.length()));
+  }
+#endif
+
+ protected:
+  DataRequest(int type) : Announce(type, router::SINGLE) {}
+};
+
+/** Package containing part of the firmware
+ *
+ * The package type/identifier is set to 12.
+ */
+class Data : public DataRequest {
+ public:
+  TSTRING data;
+
+  Data() : DataRequest(12) {}
+
+  Data(JsonObject jsonObj) : DataRequest(jsonObj) {
+    data = jsonObj["data"].as<TSTRING>();
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj = DataRequest::addTo(std::move(jsonObj));
+    jsonObj["data"] = data;
+    return jsonObj;
+  }
+
+  static Data replyTo(const DataRequest& req, TSTRING data, size_t partNo) {
+    Data d;
+    d.from = req.dest;
+    d.dest = req.from;
+    d.md5 = req.md5;
+    d.hardware = req.hardware;
+    d.role = req.role;
+    d.forced = req.forced;
+    d.noPart = req.noPart;
+    d.partNo = partNo;
+    d.data = data;
+    d.broadcasted = req.broadcasted;
+    d.compressed = req.compressed;
+    // Phase 2: Set routing to BROADCAST for true broadcast mode
+    if (req.broadcasted) {
+      d.routing = router::BROADCAST;
+    }
+    return d;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(noJsonFields + 5 + 2 + 1) +
+           round(1.1 * (md5.length() + hardware.length() + role.length() +
+                        data.length()));
+  }
+#endif
+};
+
+inline DataRequest DataRequest::replyTo(const Data& d, size_t partNo) {
+  DataRequest req;
+  req.from = d.dest;
+  req.dest = d.from;
+  req.md5 = d.md5;
+  req.hardware = d.hardware;
+  req.role = d.role;
+  req.forced = d.forced;
+  req.noPart = d.noPart;
+  req.partNo = partNo;
+  req.broadcasted = d.broadcasted;
+  req.compressed = d.compressed;
+  return req;
+}
+
+/** Data related to the current state of the node update
+ *
+ * This class is used by the OTA algorithm to keep track of both the current
+ * version of the software and the ongoing update.
+ *
+ * The firmware md5 uniquely identifies each firmware version
+ */
+class State : public protocol::PackageInterface {
+ public:
+  TSTRING md5;
+#ifdef ESP32
+  TSTRING hardware = "ESP32";
+#else
+  TSTRING hardware = "ESP8266";
+#endif
+  TSTRING role;
+  size_t noPart = 0;
+  size_t partNo = 0;
+  bool broadcasted = false;
+  bool compressed = false;
+  TSTRING ota_fn = "/ota_fw.json";
+
+  State() {}
+
+  State(JsonObject jsonObj) {
+    md5 = jsonObj["md5"].as<TSTRING>();
+    hardware = jsonObj["hardware"].as<TSTRING>();
+    role = jsonObj["role"].as<TSTRING>();
+    broadcasted = jsonObj["broadcasted"].as<bool>();
+    compressed = jsonObj["compressed"].as<bool>();
+  }
+
+  State(const Announce& ann) {
+    md5 = ann.md5;
+    hardware = ann.hardware;
+    role = ann.role;
+    noPart = ann.noPart;
+    broadcasted = ann.broadcasted;
+    compressed = ann.compressed;
+  }
+
+  JsonObject addTo(JsonObject&& jsonObj) const {
+    jsonObj["role"] = role;
+    jsonObj["md5"] = md5;
+    jsonObj["hardware"] = hardware;
+    jsonObj["broadcasted"] = broadcasted;
+    jsonObj["compressed"] = compressed;
+    return jsonObj;
+  }
+
+#if ARDUINOJSON_VERSION_MAJOR < 7
+  size_t jsonObjectSize() const {
+    return JSON_OBJECT_SIZE(3) +
+           round(1.1 * (md5.length() + hardware.length() + role.length()));
+  }
+#endif
+
+  std::shared_ptr<Task> task;
+};
+
+typedef std::function<size_t(painlessmesh::plugin::ota::DataRequest,
+                             char* buffer)>
+    otaDataPacketCallbackType_t;
+
+template <class T>
+void addSendPackageCallback(Scheduler& scheduler,
+                            plugin::PackageHandler<T>& mesh,
+                            otaDataPacketCallbackType_t callback,
+                            size_t otaPartSize) {
+  using namespace logger;
+#if defined(ESP32) || defined(ESP8266)
+  mesh.onPackage(
+      (int)OTA_OP_CODES::DATA_REQUEST,
+      [&mesh, callback, otaPartSize](painlessmesh::protocol::Variant& variant) {
+        auto pkg = variant.to<painlessmesh::plugin::ota::DataRequest>();
+        char buffer[otaPartSize + 1];
+        memset(buffer, 0, otaPartSize + 1);
+        auto size = callback(pkg, buffer);
+        // Handle zero size
+        if (!size) {
+          // No data is available by the user app.
+
+          // todo - doubtful, shall we return true or false. What is the purpose
+          // of this return value.
+          return true;
+        }
+        // Encode data as base64 so there are no null characters and can be
+        // shown in plaintext
+        auto b64Data =
+            painlessmesh::base64::encode((unsigned char*)buffer, size);
+        auto reply =
+            painlessmesh::plugin::ota::Data::replyTo(pkg, b64Data, pkg.partNo);
+        
+        // Phase 2: Routing is now handled in replyTo() based on broadcasted flag
+        mesh.sendPackage(&reply);
+        if (pkg.broadcasted) {
+          Log(DEBUG, "OTA: Broadcasting chunk %d/%d\n", pkg.partNo, pkg.noPart);
+        }
+        return true;
+      });
+
+#endif
+}
+
+template <class T>
+void addReceivePackageCallback(
+    Scheduler& scheduler, plugin::PackageHandler<T>& mesh, TSTRING role = "",
+    std::function<void(int, int)> progress_cb = NULL) {
+  using namespace logger;
+#if defined(ESP32) || defined(ESP8266)
+  auto currentFW = std::make_shared<State>();
+  currentFW->role = role;
+  auto updateFW = std::make_shared<State>();
+  updateFW->role = role;
+#ifdef USE_FS_SPIFFS
+  SPIFFS.begin(true);  // Start the SPI Flash Files System
+  if (SPIFFS.exists(currentFW->ota_fn)) {
+    auto file = SPIFFS.open(currentFW->ota_fn, "r");
+#else
+  LittleFS.begin();  // Start the SPI Flash Files System
+  if (LittleFS.exists(currentFW->ota_fn)) {
+    auto file = LittleFS.open(currentFW->ota_fn, "r");
+#endif
+    TSTRING msg = "";
+    while (file.available()) {
+      msg += (char)file.read();
+    }
+    protocol::Variant var(msg);
+    auto fw = var.to<State>();
+    if (fw.role == role && fw.hardware == currentFW->hardware) {
+      Log(DEBUG, "MD5 found %s\n", fw.md5.c_str());
+      currentFW->md5 = fw.md5;
+    }
+  }
+
+  mesh.onPackage((int)OTA_OP_CODES::ANNOUNCE, [currentFW, updateFW, &mesh,
+                                               &scheduler](
+                                                  protocol::Variant& variant) {
+    // convert variant to Announce
+    auto pkg = variant.to<Announce>();
+    // Check if we want the update
+    if (currentFW->role == pkg.role && currentFW->hardware == pkg.hardware) {
+      if ((currentFW->md5 == pkg.md5 && !pkg.forced) ||
+          updateFW->md5 == pkg.md5) {
+        // Either already have it, or already updating to it
+        return false;
+      } else {
+        updateFW->md5 = pkg.md5;
+        updateFW->broadcasted = pkg.broadcasted;
+        updateFW->compressed = pkg.compressed;
+        // If we are not in broadcasted mode, or we are the root node, begin
+        // requesting data
+        if (!pkg.broadcasted || mesh.isRoot()) {
+          auto request =
+              DataRequest::replyTo(pkg, mesh.getNodeId(), updateFW->partNo);
+          // enable the request task
+          updateFW->task =
+              mesh.addTask(scheduler, 30 * TASK_SECOND, 10,
+                           [request, &mesh]() { mesh.sendPackage(&request); });
+          updateFW->task->setOnDisable([updateFW]() {
+            Log(ERROR, "OTA: Did not receive the requested data.\n");
+            updateFW->md5 = "";
+          });
+        }
+      }
+    }
+    return false;
+  });
+
+  // mesh.onPackage(11, [currentFW](protocol::Variant &variant) {
+  //   Log(ERROR, "Data request should not be send to this node\n");
+  //   return false;
+  // });
+
+  mesh.onPackage((int)OTA_OP_CODES::DATA, [currentFW, updateFW, progress_cb,
+                                           &mesh, &scheduler](
+                                              protocol::Variant& variant) {
+    auto pkg = variant.to<Data>();
+    // Check whether it is a new part, of correct md5 role etc etc
+    if (updateFW->md5 == pkg.md5 && updateFW->role == pkg.role &&
+        updateFW->hardware == pkg.hardware) {
+      // Have we have received the next chunk of firmware in sequence?
+      if (updateFW->partNo == pkg.partNo) {
+        if (progress_cb != NULL) {
+          progress_cb(pkg.partNo, pkg.noPart);
+        }
+        if (pkg.partNo == 0) {
+#ifdef ESP32
+          uint32_t maxSketchSpace = UPDATE_SIZE_UNKNOWN;
+#else
+          uint32_t maxSketchSpace =
+                  (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000;
+#endif
+          Log(DEBUG, "Sketch size %d\n", maxSketchSpace);
+          if (Update.isRunning()) {
+            Update.end(false);
+          }
+          if (!Update.begin(maxSketchSpace)) {  // start with max available size
+            Log(DEBUG, "handleOTA(): OTA start failed!");
+            Update.printError(Serial);
+            Update.end();
+          } else {
+            Update.setMD5(pkg.md5.c_str());
+          }
+        }
+
+        //    write data
+        auto b64Data = base64::decode(pkg.data);
+        if (Update.write((uint8_t*)b64Data.c_str(), b64Data.length()) !=
+            b64Data.length()) {
+          Log(ERROR, "handleOTA(): OTA write failed!");
+          Update.printError(Serial);
+          Update.end();
+          updateFW->md5 = "";
+          updateFW->partNo = 0;
+          return false;
+        }
+
+        // If last part then write ota_fn and reboot
+        if (pkg.partNo == pkg.noPart - 1) {
+          // check md5, reboot
+          if (Update.end(true)) {  // true to set the size to the
+                                   // current progress
+#ifdef USE_FS_SPIFFS
+            auto file = SPIFFS.open(updateFW->ota_fn, "w");
+            if (!file) {
+              Log(ERROR,
+                  "handleOTA(): Unable to write md5 of new update to the "
+                  "SPIFFS "
+                  "file. This will result in endless update loops for OTA\n");
+            }
+#else
+            auto file = LittleFS.open(updateFW->ota_fn, "w");
+            if (!file) {
+              Log(ERROR, "handleOTA(): Unable to write md5 of new binary to the LittleFS file. This will result in endless update loops for OTA\n");
+            }
+#endif
+
+            String msg;
+            protocol::Variant var(updateFW.get());
+            var.printTo(msg);
+            file.print(msg);
+            file.close();
+
+            Log(DEBUG, "handleOTA(): OTA Success! %s, %s\n", msg.c_str(),
+                updateFW->role.c_str());
+            // Delay restart by 2 seconds to allow mesh activity to finish
+            mesh.addTask(scheduler, 2 * TASK_SECOND, TASK_ONCE,
+                         []() { ESP.restart(); })
+                ->enableDelayed();
+          } else {
+            Log(DEBUG, "handleOTA(): OTA failed!\n");
+            Update.printError(Serial);
+            updateFW->md5 = "";
+            updateFW->partNo = 0;
+          }
+          if (updateFW->task != NULL) {
+            updateFW->task->setOnDisable(NULL);
+            updateFW->task->disable();
+          }
+        } else {
+          // else request more
+          ++updateFW->partNo;
+          if (updateFW->task != NULL) {
+            auto request = DataRequest::replyTo(pkg, updateFW->partNo);
+            updateFW->task->setCallback(
+                [request, &mesh]() { mesh.sendPackage(&request); });
+            // updateFW->task->disable();
+            updateFW->task->restart();
+          }
+        }
+      } else {
+        // We are out-of-sequence, resume with non-broadcasted update
+        if (updateFW->broadcasted && pkg.broadcasted) {
+          Log(DEBUG, "Out of sequence packet! We may have missed a packet?");
+          // Drop of out broadcasted mode
+          updateFW->broadcasted = false;
+          auto request = DataRequest::replyTo(pkg, updateFW->partNo);
+          request.broadcasted = false;
+          updateFW->task =
+              mesh.addTask(scheduler, 30 * TASK_SECOND, 10,
+                           [request, &mesh]() { mesh.sendPackage(&request); });
+          updateFW->task->setOnDisable([updateFW]() {
+            Log(ERROR, "OTA: Did not receive the requested data.\n");
+            updateFW->md5 = "";
+          });
+        }
+      }
+    }
+    return false;
+  });
+
+#endif
+}
+
+}  // namespace ota
+}  // namespace plugin
+}  // namespace painlessmesh
+
+#endif