@alicloud/ecs20140526 7.8.5 → 7.9.0

package/src/models/RevokeSecurityGroupRequest.ts

@@ -13,9 +13,9 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * The destination IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The destination IPv4 CIDR block. CIDR blocks and IPv4 address range are supported.
    * 
-   * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
+   * This parameter is used for quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
    * @example
    * 10.0.0.0/8
@@ -23,19 +23,14 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * The protocol. The values of this parameter are case-insensitive. Valid values:
-   * 
+   * The protocol type. The value is case-insensitive. Valid values: 
+   *          
    * - TCP.
-   * 
    * - UDP.
-   * 
    * - ICMP.
-   * 
    * - ICMPv6.
-   * 
    * - GRE.
-   * 
-   * - ALL: All protocols are supported.
+   * - ALL: all protocols.
    * 
    * @example
    * TCP
@@ -43,11 +38,11 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   ipProtocol?: string;
   /**
    * @remarks
-   * The destination IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The destination IPv6 CIDR block. CIDR blocks and IPv6 address range are supported.
    * 
-   * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
+   * This parameter is used for quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
-   * > This parameter is valid only for ECS instances that reside in VPCs and support IPv6 CIDR blocks. You cannot specify both this parameter and `DestCidrIp` in the same request.
+   * > This parameter is valid only for VPC-type ECS instances that support IPv6. You cannot specify both this parameter and `DestCidrIp`.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -55,9 +50,9 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * The source IPv6 CIDR block of the security group rule. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The source IPv6 Classless Inter-Domain Routing (CIDR) block from which you want to revoke access permissions. CIDR format and IPv6 address range are supported.
    * 
-   * > This parameter is valid only for Elastic Compute Service (ECS) instances that reside in virtual private clouds (VPCs) and support IPv6 CIDR blocks. You cannot specify both this parameter and `SourceCidrIp` in the same request.
+   * > This parameter is valid only for VPC-type ECS instances that support IPv6. You cannot specify both this parameter and `SourceCidrIp`.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -65,17 +60,11 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * The network interface controller (NIC) type of the security group rule if the security group resides in the classic network. Valid values:
+   * The network interface controller (NIC) type of the security group rule. For VPC-type security groups, you do not need to set the network type. The default value is intranet, and only intranet is supported.
    * 
-   * - internet: public NIC.
-   * 
-   * - intranet: internal NIC.
-   * 
-   * If the security group resides in a VPC, this parameter is set to intranet by default and cannot be modified.
-   * 
-   * If you specify `SourceGroupId` to delete inbound security group rules that reference the specified security group as an authorization object, you must set this parameter to intranet.
-   * 
-   * Default value: internet.
+   * > The classic network feature has been taken offline. For details, see [Retirement notice](https://help.aliyun.com/document_detail/2833134.html). For classic network-type security group rules, valid values are:
+   * > - internet: public network interface controller (NIC).
+   * > - intranet: internal network interface controller (NIC).
    * 
    * @example
    * intranet
@@ -83,11 +72,10 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   nicType?: string;
   /**
    * @remarks
-   * The action of the security group rule. Valid values:
-   * 
-   * - accept: allows inbound access.
-   * 
-   * - drop: denies inbound access and returns no responses. In this case, the request times out or the connection cannot be established.
+   * The access permissions. Valid values: 
+   *          
+   * - accept: Accepts access.
+   * - drop: Deny access without returning any denial information. The request appears to timeout or the connection cannot be established.
    * 
    * Default value: accept.
    * 
@@ -97,15 +85,12 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * The destination port range of the security group rule. Valid values:
-   * 
-   * - If you set IpProtocol to TCP or UDP, the valid values of this parameter are 1 to 65535. Specify a port range in the format of \\<Start port number>/\\<End port number>. Example: 1/200.
-   * 
-   * - If you set IpProtocol to ICMP, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to GRE, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to ALL, the port range is -1/-1.
+   * The range of destination ports that correspond to the transport layer protocol. Valid values:
+   *          
+   * - TCP/UDP: Valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
    * @example
    * 1/200
@@ -113,11 +98,13 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * The ID of the port list. You can call the `DescribePortRangeLists` operation to query the IDs of available port lists.
+   * The port list ID.
+   * 
+   * You can call `DescribePortRangeLists` to query available port list IDs.
    * 
-   * - If you specify `Permissions.N.PortRange`, this parameter is ignored.
+   * If you specify `Permissions.N.PortRange`, this parameter is ignored.
    * 
-   * - If a security group resides in the classic network, you cannot reference port lists in the rules of the security group. For information about the limits on security groups and port lists, see the [Security groups](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas on ECS" topic.
+   * For more information, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * prl-2ze9743****
@@ -125,7 +112,7 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   portRangeListId?: string;
   /**
    * @remarks
-   * The priority of the security group rule. A smaller value specifies a higher priority. Valid values: 1 to 100.
+   * The priority of the security group rule. A smaller value indicates a higher priority. Valid values: 1 to 100.
    * 
    * Default value: 1.
    * 
@@ -135,7 +122,7 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The source IPv4 CIDR block of the security group rule. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The source IPv4 Classless Inter-Domain Routing (CIDR) block from which you want to revoke access permissions. CIDR format and IPv4 address range are supported.
    * 
    * @example
    * 10.0.0.0/8
@@ -143,19 +130,19 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * The ID of the source security group referenced in the security group rule.
+   * The ID of the source security group from which you want to revoke access permissions.
    * 
-   * - You must specify at least one of the following parameters: `SourceGroupId`, `SourceCidrIp`, `Ipv6SourceCidrIp`, and `SourcePrefixListId`.
+   * - Set at least one of `SourceGroupId`, `SourceCidrIp`, `Ipv6SourceCidrIp`, or `SourcePrefixListId`.
    * 
-   * - If you specify `SourceGroupId` but do not specify `SourceCidrIp` or `Ipv6SourceCidrIp`, you must set NicType to intranet.
+   * - If you specify `SourceGroupId` but do not specify the `SourceCidrIp` or `Ipv6SourceCidrIp` parameter, set NicType to intranet.
    * 
-   * - If you specify both `SourceGroupId` and `SourceCidrIp`, `SourceCidrIp` takes precedence.
+   * - If you specify both `SourceGroupId` and `SourceCidrIp`, `SourceCidrIp` takes precedence by default.
    * 
-   * Take note of the following items:
+   * Note:
    * 
-   * - Advanced security groups do not support security group rules that reference security groups as authorization objects (sources or destinations of traffic).
+   * - Advanced security groups do not support authorization by security group access.
    * 
-   * - Each basic security group can contain up to 20 security group rules that reference security groups as authorization objects.
+   * - A maximum of 20 security groups can be authorized for a basic security group.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -163,11 +150,10 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   sourceGroupId?: string;
   /**
    * @remarks
-   * The Alibaba Cloud account that manages the source security group referenced in the security group rule.
-   * 
-   * - If both `SourceGroupOwnerAccount` and `SourceGroupOwnerId` are empty, access control on another security group in your Alibaba Cloud account is removed.
+   * The Alibaba Cloud account that owns the source security group when you revoke a cross-account authorization security group rule.
    * 
-   * - If you specify `SourceCidrIp`, `SourceGroupOwnerAccount` is ignored.
+   * - If neither `SourceGroupOwnerAccount` nor `SourceGroupOwnerId` is set, the access permissions for another security group within your account are revoked.
+   * - If the `SourceCidrIp` parameter is set, the `SourceGroupOwnerAccount` parameter is ignored.
    * 
    * @example
    * Test@aliyun.com
@@ -175,11 +161,10 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   sourceGroupOwnerAccount?: string;
   /**
    * @remarks
-   * The ID of the Alibaba Cloud account that manages the source security group referenced in the security group rule.
+   * The ID of the Alibaba Cloud account that owns the source security group when you revoke a cross-account authorization security group rule.
    * 
-   * - If both `SourceGroupOwnerId` and `SourceGroupOwnerAccount` are empty, access control on another security group in your Alibaba Cloud account is removed.
-   * 
-   * - If you specify `SourceCidrIp`, `SourceGroupOwnerId` is ignored.
+   * - If neither `SourceGroupOwnerId` nor `SourceGroupOwnerAccount` is set, the access permissions for another security group within your account are revoked.
+   * - If the `SourceCidrIp` parameter is set, the `SourceGroupOwnerId` parameter is ignored.
    * 
    * @example
    * 12345678910
@@ -187,17 +172,14 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   sourceGroupOwnerId?: number;
   /**
    * @remarks
-   * The source port range of the security group rule. Valid values:
-   * 
-   * - If you set IpProtocol to TCP or UDP, the valid values of this parameter are 1 to 65535. Specify a port range in the format of \\<Start port number>/\\<End port number>. Example: 1/200.
-   * 
-   * - If you set IpProtocol to ICMP, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to GRE, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to ALL, the port range is -1/-1.
+   * The range of source ports that correspond to the transport layer protocol. Valid values: 
+   *          
+   * - TCP/UDP: Valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
-   * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
+   * This parameter is used for quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
    * @example
    * 80/80
@@ -205,13 +187,13 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
   sourcePortRange?: string;
   /**
    * @remarks
-   * The ID of the source prefix list of the security group rule. You can call the [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) operation to query the IDs of available prefix lists.
+   * The ID of the source prefix list from which you want to revoke access permissions. You can invoke [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) to query available prefix list IDs.
    * 
-   * Take note of the following items:
+   * Note:
    * 
-   * - If a security group resides in the classic network, you cannot specify prefix lists in the rules of the security group. For information about the limits on security groups and prefix lists, see the [Security groups](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas on ECS" topic.
+   * If you specify `SourceCidrIp`, `Ipv6SourceCidrIp`, or `SourceGroupId`, this parameter is ignored.
    * 
-   * - If you specify `SourceCidrIp`, `Ipv6SourceCidrIp`, or `SourceGroupId`, this parameter is ignored.
+   * For more information, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****
@@ -271,7 +253,7 @@ export class RevokeSecurityGroupRequestPermissions extends $dara.Model {
 export class RevokeSecurityGroupRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * A client token used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -279,7 +261,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Description` to specify the rule description.
+   * Deprecated. Use `Permissions.N.Description` to specify the rule description.
    * 
    * @example
    * This is description.
@@ -289,7 +271,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestCidrIp` to specify the destination IPv4 CIDR block.
+   * Deprecated. Use `Permissions.N.DestCidrIp` to specify the destination IPv4 CIDR block.
    * 
    * @example
    * 10.0.0.0/8
@@ -299,7 +281,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.IpProtocol` to specify the protocol.
+   * Deprecated. Use `Permissions.N.IpProtocol` to specify the protocol type.
    * 
    * @example
    * ALL
@@ -309,7 +291,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   ipProtocol?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Ipv6DestCidrIp` to specify the destination IPv6 CIDR block.
+   * Deprecated. Use `Permissions.N.Ipv6DestCidrIp` to specify the destination IPv6 CIDR block.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -319,7 +301,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Ipv6SourceCidrIp` to specify the source IPv6 CIDR block.
+   * Deprecated. Use `Permissions.N.Ipv6SourceCidrIp` to specify the source IPv6 Classless Inter-Domain Routing (CIDR) block.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -329,7 +311,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.NicType` to specify the network interface type.
+   * Deprecated. Use `Permissions.N.NicType` to specify the network interface type.
    * 
    * @example
    * intranet
@@ -341,12 +323,12 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The security group rules. You can specify up to 100 security group rules.
+   * The security group rules. Array length: 0 to 100.
    */
   permissions?: RevokeSecurityGroupRequestPermissions[];
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Policy` to specify whether to allow inbound access.
+   * Deprecated. Use `Permissions.N.Policy` to set the access permissions.
    * 
    * @example
    * accept
@@ -356,7 +338,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.PortRange` to specify the range of destination ports.
+   * Deprecated. Use `Permissions.N.PortRange` to specify the port range.
    * 
    * @example
    * 1/200
@@ -366,7 +348,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Priority` to specify the rule priority.
+   * Deprecated. Use `Permissions.N.Priority` to specify the rule priority.
    * 
    * @example
    * 1
@@ -376,7 +358,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 
@@ -388,7 +370,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The ID of the security group.
+   * The security group ID.
    * 
    * This parameter is required.
    * 
@@ -398,12 +380,12 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   securityGroupId?: string;
   /**
    * @remarks
-   * The security group rule IDs. You can specify 1 to 100 security group rule IDs in a request.
+   * The IDs of security group rules. Array length: 0 to 100.
    */
   securityGroupRuleId?: string[];
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourceCidrIp` to specify the source IPv4 CIDR block.
+   * Deprecated. Use `Permissions.N.SourceCidrIp` to specify the source IPv4 Classless Inter-Domain Routing (CIDR) block.
    * 
    * @example
    * 10.0.0.0/8
@@ -413,7 +395,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourceGroupId` to specify the ID of the source security group.
+   * Deprecated. Use `Permissions.N.SourceGroupId` to specify the source security group ID.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -423,7 +405,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   sourceGroupId?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourceGroupOwnerAccount` to specify the Alibaba Cloud account that manages the source security group.
+   * Deprecated. Use `Permissions.N.SourceGroupOwnerAccount` to specify the Alibaba Cloud account that owns the source security group.
    * 
    * @example
    * Test@aliyun.com
@@ -433,7 +415,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   sourceGroupOwnerAccount?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourceGroupOwnerId` to specify the ID of the Alibaba Cloud account that manages the source security group.
+   * Deprecated. Use `Permissions.N.SourceGroupOwnerId` to specify the ID of the Alibaba Cloud account that owns the source security group.
    * 
    * @example
    * 12345678910
@@ -443,7 +425,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   sourceGroupOwnerId?: number;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourcePortRange` to specify the range of source ports.
+   * Deprecated. Use `Permissions.N.SourcePortRange` to specify the source port range.
    * 
    * @example
    * 80/80
@@ -453,7 +435,7 @@ export class RevokeSecurityGroupRequest extends $dara.Model {
   sourcePortRange?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourcePrefixListId` to specify the ID of the source prefix list.
+   * Deprecated. Use `Permissions.N.SourcePrefixListId` to specify the source prefix list ID.
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****

package/src/models/StartTerminalSessionRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class StartTerminalSessionRequestEncryptionOptions extends $dara.Model {
   /**
    * @remarks
-   * Enable end-to-end encryption for the session connection.
+   * Specifies whether to enable end-to-end encryption for the session connection.
    * 
    * @example
    * true
@@ -13,12 +13,10 @@ export class StartTerminalSessionRequestEncryptionOptions extends $dara.Model {
   enabled?: boolean;
   /**
    * @remarks
-   * KMS key ID.<br>
-   * Notes:
-   * 
+   * The KMS key ID.
+   * Note:
    * - Only KMS symmetric keys are supported.
-   * 
-   * - This parameter can be specified only when the encryption mode is Kms.
+   * - This parameter can be specified only when the encryption mode is set to Kms.
    * 
    * @example
    * xxx
@@ -26,16 +24,12 @@ export class StartTerminalSessionRequestEncryptionOptions extends $dara.Model {
   KMSKeyId?: string;
   /**
    * @remarks
-   * Encryption mode. Valid values:
-   * 
-   * - Auto: Use autonegotiation to encrypt the session with a secret key.
-   * 
-   * - Kms: Use a KMS key to encrypt the session.
-   * 
+   * The secret key encryption pattern. Valid values:
+   * - Auto: uses an automatically negotiated key to encrypt the session.
+   * - Kms: uses a KMS key to encrypt the session.
    * - Default value: Auto.
    * 
-   * Notes:
-   * 
+   * Note:
    * - This parameter can be specified only when session encryption is enabled.
    * 
    * @example
@@ -70,7 +64,7 @@ export class StartTerminalSessionRequestEncryptionOptions extends $dara.Model {
 export class StartTerminalSessionRequest extends $dara.Model {
   /**
    * @remarks
-   * Ensures the idempotence of the request. Generate a unique parameter value from your client to guarantee uniqueness across different requests. **ClientToken** supports only ASCII characters and must not exceed 64 characters. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -78,9 +72,9 @@ export class StartTerminalSessionRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * The command to run after the session is initiated. The command length cannot exceed 512 characters.
+   * The command to run after the session is initiated. The command can be up to 512 characters in length.
    * 
-   * > If you specify the `CommandLine` parameter, you cannot specify the `PortNumber` or `TargetServer` parameter.
+   * > After you specify `CommandLine`, you cannot specify `PortNumber` or `TargetServer`.
    * 
    * @example
    * ssh root@192.168.0.246
@@ -88,11 +82,9 @@ export class StartTerminalSessionRequest extends $dara.Model {
   commandLine?: string;
   /**
    * @remarks
-   * The network type of the WebSocket URL required to connect to the instance. Valid values:
-   * 
-   * - Internet (default)
-   * 
-   * - Intranet
+   * The network type of the WebSocket URL required for the remote connection to the instance. Valid values:
+   * - Internet: the Internet. This is the default value.
+   * - Intranet: the internal network.
    * 
    * @example
    * Intranet
@@ -100,12 +92,12 @@ export class StartTerminalSessionRequest extends $dara.Model {
   connectionType?: string;
   /**
    * @remarks
-   * Session encryption configuration items.
+   * The session encryption configuration.
    */
   encryptionOptions?: StartTerminalSessionRequestEncryptionOptions;
   /**
    * @remarks
-   * The instance IDs.
+   * The instance ID list.
    * 
    * This parameter is required.
    */
@@ -114,8 +106,8 @@ export class StartTerminalSessionRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The password name of the user when using Session Manager on a Windows instance. The length cannot exceed 255 characters.<br>
-   * When you want to use Session Manager on a Windows instance as a non-default user (System), you must pass both Username and this parameter. To reduce the risk of password disclosure, store the plaintext password in the parameter repository of CloudOps Orchestration Service, and pass only the password name here. For more information, see [encrypted parameters](https://help.aliyun.com/document_detail/186828.html).
+   * The name of the password for the user when you use Session Manager on a Windows instance. The name can be up to 255 characters in length.
+   * When you want to use Session Manager on a Windows instance as a non-default user (System), specify both Username and this parameter. To reduce the risk of password leaks, store the plaintext password in the parameter repository of operations management and specify only the password name here. For more information, see [Encryption parameters](https://help.aliyun.com/document_detail/186828.html).
    * 
    * @example
    * axtSecretPassword
@@ -123,9 +115,9 @@ export class StartTerminalSessionRequest extends $dara.Model {
   passwordName?: string;
   /**
    * @remarks
-   * The port number of the ECS instance. The port is used to forward data. After this parameter is configured, Cloud Assistant Agent forwards data to the specified port. For example, you can set this parameter to 22 for data forwarding over SSH.
+   * The port number of the ECS instance for data forwarding. After this parameter is specified, Cloud Assistant Agent forwards data to the specified port for port forwarding. For example, SSH uses port 22.
    * 
-   * This parameter is empty by default, which indicates that no port is configured to forward data.
+   * Default value: empty, which indicates that no port number is specified for data forwarding.
    * 
    * @example
    * 22
@@ -133,7 +125,7 @@ export class StartTerminalSessionRequest extends $dara.Model {
   portNumber?: number;
   /**
    * @remarks
-   * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the instance. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 
@@ -145,9 +137,9 @@ export class StartTerminalSessionRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The IP address of the instance. You can use the IP address to access the destination service in a virtual private cloud (VPC).
+   * The address of the destination server in the VPC that you want to access through the instance.
    * 
-   * > If this parameter is not empty, `PortNumber` specifies the port number that is used by the managed instance to access the destination service in the VPC.
+   * > If this parameter is not empty, `PortNumber` specifies the port number of the destination server in the VPC that you want to access through the managed instance.
    * 
    * @example
    * 192.168.0.246
@@ -155,7 +147,7 @@ export class StartTerminalSessionRequest extends $dara.Model {
   targetServer?: string;
   /**
    * @remarks
-   * The username used for connection establishment.
+   * The username used for the connection.
    * 
    * @example
    * testUser

package/src/models/StartTerminalSessionResponseBody.ts

@@ -13,7 +13,7 @@ export class StartTerminalSessionResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * The security token included in the WebSocket request header. The system uses this token to authenticate the request.
+   * The security token that is appended to the WebSocket request header for system verification of the request.
    * 
    * @example
    * d86c2df2-d19c-4bd8-b817-a19ef123****
@@ -29,7 +29,7 @@ export class StartTerminalSessionResponseBody extends $dara.Model {
   sessionId?: string;
   /**
    * @remarks
-   * The URL of the WebSocket session that is used to connect to the instance. The URL includes the session ID (`SessionId`) and the authentication token (`SecurityToken`).
+   * The URL of the WebSocket session for the remote connection to the ECS instance. The URL contains the session ID (`SessionId`) and the `SecurityToken` for system verification.
    * 
    * @example
    * wss://cn-hangzhou.axt.aliyuncs.com/session?sessionId=s-hz023od0x9****&token=d86c2df2-d19c-4bd8-b817-a19ef123****