@alicloud/ecs20140526 7.8.5 → 7.9.0

package/src/models/RevokeSecurityGroupEgressRequest.ts

@@ -13,7 +13,7 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * The destination IPv4 CIDR block of the security group rule. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The destination IPv4 Classless Inter-Domain Routing (CIDR) block for which you want to revoke access permissions. The format supports both CIDR blocks and IPv4 address ranges.
    * 
    * @example
    * 10.0.0.0/8
@@ -21,19 +21,16 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * The ID of the destination security group of the security group rule.
+   * The ID of the destination security group for which you want to revoke access permissions.
    * 
-   * - You must specify at least one of the following parameters: `DestGroupId`, `DestCidrIp`, `Ipv6DestCidrIp`, and `DestPrefixListId`.
+   * - Specify at least one of `DestGroupId`, `DestCidrIp`, `Ipv6DestCidrIp`, or `DestPrefixListId`.
+   * - If `DestGroupId` is specified but `DestCidrIp` is not, the `NicType` parameter can only be set to intranet.
+   * - If both `DestGroupId` and `DestCidrIp` are specified, `DestCidrIp` takes precedence.
    * 
-   * - If you specify `DestGroupId` but do not specify `DestCidrIp`, you must set `NicType` to intranet.
+   * Note:
    * 
-   * - If you specify both `DestGroupId` and `DestCidrIp`, `DestCidrIp` takes precedence.
-   * 
-   * Take note of the following items:
-   * 
-   * - Advanced security groups do not support security group rules that reference security groups as authorization objects.
-   * 
-   * - Each basic security group can contain up to 20 security group rules that reference security groups as authorization objects.
+   * - Advanced security groups do not support authorization for other security groups.
+   * - A maximum of 20 security groups can be authorized for a basic security group.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -41,11 +38,10 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destGroupId?: string;
   /**
    * @remarks
-   * The Alibaba Cloud account that manages the destination security group specified in the security group rule.
-   * 
-   * - If you leave `DestGroupOwnerAccount` and `DestGroupOwnerId` empty, access control configurations are removed from another security group managed by your Alibaba Cloud account.
+   * The Alibaba Cloud account that manages the destination security group when you revoke a cross-account authorization security group rule.
    * 
-   * - If you specify `DestCidrIp`, `DestGroupOwnerAccount` is invalid.
+   * - If neither `DestGroupOwnerAccount` nor `DestGroupOwnerId` is specified, the access permissions for another security group within your account are revoked. Settings for cross-account scenarios require this parameter.
+   * - If `DestCidrIp` is specified, this parameter is ignored.
    * 
    * @example
    * Test@aliyun.com
@@ -53,11 +49,10 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destGroupOwnerAccount?: string;
   /**
    * @remarks
-   * The ID of the Alibaba Cloud account that manages the destination security group specified in the security group rule.
+   * The ID of the Alibaba Cloud account that manages the destination security group when you revoke a cross-account authorization security group rule.
    * 
-   * - If you leave `DestGroupOwnerId` and `DestGroupOwnerAccount` empty, access control configurations are removed from another security group managed by your Alibaba Cloud account.
-   * 
-   * - If you specify `DestCidrIp`, `DestGroupOwnerId` is invalid.
+   * - If neither `DestGroupOwnerId` nor `DestGroupOwnerAccount` is specified, the access permissions for another security group within your account are revoked. Settings for cross-account scenarios require this parameter.
+   * - If `DestCidrIp` is specified, this parameter is ignored.
    * 
    * @example
    * 12345678910
@@ -65,13 +60,13 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destGroupOwnerId?: string;
   /**
    * @remarks
-   * The ID of the destination prefix list of the security group rule. You can call the [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) operation to query the IDs of available prefix lists.
+   * The ID of the destination prefix list for which you want to revoke access permissions. You can call [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) to query available prefix list IDs.
    * 
-   * Take note of the following items:
+   * Note:
    * 
-   * - If a security group resides in the classic network, you cannot reference prefix lists in the rules of the security group. For information about the limits on security groups and prefix lists, see the [Security group limits](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas" topic.
+   * If one of `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId` is specified, this parameter is ignored.
    * 
-   * - If you specify `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId`, this parameter is ignored.
+   * For more information, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****
@@ -79,19 +74,14 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destPrefixListId?: string;
   /**
    * @remarks
-   * The protocol type. The values of this parameter are case-insensitive. Valid values:
-   * 
+   * The protocol type. The value is case-insensitive. Valid values: 
+   *          
    * - TCP.
-   * 
    * - UDP.
-   * 
    * - ICMP.
-   * 
    * - ICMPv6.
-   * 
    * - GRE.
-   * 
-   * - ALL: All protocols are supported.
+   * - ALL: all protocols.
    * 
    * @example
    * TCP
@@ -99,9 +89,9 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   ipProtocol?: string;
   /**
    * @remarks
-   * The destination IPv6 CIDR block of the security group rule. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The destination IPv6 Classless Inter-Domain Routing (CIDR) block for which you want to revoke access permissions. The format supports both CIDR blocks and IPv6 address ranges.
    * 
-   * > This parameter is valid only for Elastic Compute Service (ECS) instances that reside in virtual private clouds (VPCs) and support IPv6 CIDR blocks. You cannot specify both this parameter and `DestCidrIp` in the same request.
+   * > This parameter is valid only for VPC-connected ECS instances that support IPv6 and cannot be specified together with the `DestCidrIp` parameter. Settings for IPv6 destinations use this parameter exclusively.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -109,11 +99,11 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * The source IPv6 CIDR block of the security group rule. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The source IPv6 CIDR block. CIDR blocks and IPv6 address ranges are supported.
    * 
-   * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
+   * This parameter is used for quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
-   * > This parameter is valid only for ECS instances that reside in VPCs and support IPv6 CIDR blocks. You cannot specify both this parameter and `DestCidrIp` in the same request.
+   * > This parameter is valid only for VPC-connected ECS instances that support IPv6 and cannot be specified together with the `DestCidrIp` parameter. Settings for IPv6 sources use this parameter exclusively.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -121,17 +111,11 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * The network interface controller (NIC) type of the security group rule if the security group resides in the classic network. Valid values:
-   * 
-   * - internet: public NIC.
-   * 
-   * - intranet: internal NIC.
+   * The network interface controller (NIC) type of the security group rule. For VPC-type security groups, you do not need to configure the network interface controller (NIC) type. The default value is intranet and only intranet is supported. Settings for VPC-type security groups ignore this parameter.
    * 
-   * If the security group resides in a VPC, this parameter is set to intranet by default and cannot be modified.
-   * 
-   * If you specify `DestGroupId` to delete outbound security group rules that reference the specified security group as an authorization object, you must set this parameter to intranet.
-   * 
-   * Default value: internet.
+   * > The classic network feature has been taken offline. For details, see [Discontinuation notice](https://help.aliyun.com/document_detail/2833134.html). The network interface controller (NIC) type for classic network-type security group rules. Valid values:
+   * > - internet: public network interface controller (NIC).
+   * > - intranet: internal network interface controller (NIC).
    * 
    * @example
    * intranet
@@ -139,11 +123,10 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   nicType?: string;
   /**
    * @remarks
-   * The action of the security group rule. Valid values:
-   * 
-   * - accept: allows access.
-   * 
-   * - drop: denies access and returns no responses. In this case, the request times out or the connection cannot be established.
+   * The access permissions. Valid values: 
+   *          
+   * - accept: Accepts access.
+   * - drop: Denies access and returns no deny information. The request timeout or the connection cannot be established.
    * 
    * Default value: accept.
    * 
@@ -153,15 +136,12 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * The destination port range of the security group rule. Valid values:
-   * 
-   * - If you set IpProtocol to TCP or UDP, the valid values of this parameter are 1 to 65535. Specify a port range in the format of \\<Start port number>/\\<End port number>. Example: 1/200.
-   * 
-   * - If you set IpProtocol to ICMP, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to GRE, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to ALL, the port range is -1/-1.
+   * The range of destination ports that correspond to the transport layer protocol. Valid values: 
+   *          
+   * - TCP/UDP: Valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
    * @example
    * 22/22
@@ -169,11 +149,12 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * The ID of the port list. You can call the `DescribePortRangeLists` operation to query the IDs of available prefix lists.
+   * The port list ID.
+   * You can call `DescribePortRangeLists` to query available port list IDs.
    * 
-   * - If you specify `Permissions.N.PortRange`, this parameter is ignored.
+   * If `Permissions.N.PortRange` is specified, this parameter is ignored.
    * 
-   * - If a security group resides in the classic network, you cannot reference port lists in the rules of the security group. For information about the limits on security groups and port lists, see the [Security group limits](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas" topic.
+   * For more information, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * prl-2ze9743****
@@ -181,7 +162,7 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   portRangeListId?: string;
   /**
    * @remarks
-   * The priority of the security group rule. A smaller value specifies a higher priority. Valid values: 1 to 100.
+   * The priority of the security group rule. A smaller value indicates a higher priority. Valid values: 1 to 100.
    * 
    * Default value: 1.
    * 
@@ -191,9 +172,9 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The source IPv4 CIDR block of the security group rule. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The source IPv4 CIDR block. CIDR blocks and IPv4 address ranges are supported.
    * 
-   * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
+   * This parameter is used for quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
    * @example
    * 10.0.0.0/8
@@ -201,17 +182,14 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * The source port range of the security group rule. Valid values:
-   * 
-   * - If you set IpProtocol to TCP or UDP, the valid values of this parameter are 1 to 65535. Specify a port range in the format of \\<Start port number>/\\<End port number>. Example: 1/200.
-   * 
-   * - If you set IpProtocol to ICMP, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to GRE, the port range is -1/-1.
-   * 
-   * - If you set IpProtocol to ALL, the port range is -1/-1.
+   * The range of source ports that correspond to the transport layer protocol. Valid values:
+   *          
+   * - TCP/UDP: Valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
-   * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
+   * This parameter is used for quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
    * @example
    * 22/22
@@ -271,7 +249,7 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
 export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **token** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * A client token used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. **ClientToken** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
@@ -279,7 +257,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Description` to specify the rule description.
+   * Deprecated. Use `Permissions.N.Description` to specify the rule description.
    * 
    * @example
    * This is description.
@@ -289,7 +267,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestCidrIp` to specify the destination IPv4 CIDR block.
+   * Deprecated. Use `Permissions.N.DestCidrIp` to specify the destination IPv4 Classless Inter-Domain Routing (CIDR) block.
    * 
    * @example
    * 10.0.0.0/8
@@ -299,7 +277,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestGroupId` to specify the ID of the destination security group.
+   * Deprecated. Use `Permissions.N.DestGroupId` to specify the destination security group ID.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -309,7 +287,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destGroupId?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestGroupOwnerAccount` to specify the Alibaba Cloud account that manages the destination security group.
+   * Deprecated. Use `Permissions.N.DestGroupOwnerAccount` to specify the Alibaba Cloud account that manages the destination security group.
    * 
    * @example
    * Test@aliyun.com
@@ -319,7 +297,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destGroupOwnerAccount?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestGroupOwnerId` to specify the ID of the Alibaba Cloud account that manages the destination security group.
+   * Deprecated. Use `Permissions.N.DestGroupOwnerId` to specify the ID of the Alibaba Cloud account that manages the destination security group.
    * 
    * @example
    * 12345678910
@@ -329,7 +307,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destGroupOwnerId?: number;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestPrefixListId` to specify the ID of the destination prefix list.
+   * Deprecated. Use `Permissions.N.DestPrefixListId` to specify the source prefix list ID.
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****
@@ -339,7 +317,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destPrefixListId?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.IpProtocol` to specify the protocol.
+   * Deprecated. Use `Permissions.N.IpProtocol` to specify the protocol type.
    * 
    * @example
    * TCP
@@ -349,7 +327,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ipProtocol?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Ipv6DestCidrIp` to specify the destination IPv6 CIDR block.
+   * Deprecated. Use `Permissions.N.Ipv6DestCidrIp` to specify the destination IPv6 Classless Inter-Domain Routing (CIDR) block.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -359,7 +337,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Ipv6SourceCidrIp` to specify the source IPv6 CIDR block.
+   * Deprecated. Use `Permissions.N.Ipv6SourceCidrIp` to specify the source IPv6 CIDR block.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -369,7 +347,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.NicType` to specify the network interface type.
+   * Deprecated. Use `Permissions.N.NicType` to specify the NIC type.
    * 
    * @example
    * intranet
@@ -381,12 +359,12 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The security group rules. You can specify up to 100 security group rules.
+   * The security group rules. Array length: 0 to 100.
    */
   permissions?: RevokeSecurityGroupEgressRequestPermissions[];
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Policy` to specify whether to allow outbound access.
+   * Deprecated. Use `Permissions.N.Policy` to configure the Settings for access permissions.
    * 
    * @example
    * accept
@@ -396,7 +374,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.PortRange` to specify the range of destination ports.
+   * Deprecated. Use `Permissions.N.PortRange` to specify the port range.
    * 
    * @example
    * 22/22
@@ -406,7 +384,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Priority` to specify the rule priority.
+   * Deprecated. Use `Permissions.N.Priority` to specify the rule priority.
    * 
    * @example
    * 1
@@ -416,7 +394,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 
@@ -428,7 +406,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The ID of the security group.
+   * The security group ID.
    * 
    * This parameter is required.
    * 
@@ -438,12 +416,12 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   securityGroupId?: string;
   /**
    * @remarks
-   * An array of security group rule IDs. You can specify 1 to 100 security group rules.
+   * The IDs of security group rules. Array length: 0 to 100.
    */
   securityGroupRuleId?: string[];
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourceCidrIp` to specify the source IPv4 CIDR block.
+   * Deprecated. Use `Permissions.N.SourceCidrIp` to specify the source IPv4 CIDR block.
    * 
    * @example
    * 10.0.0.0/8
@@ -453,7 +431,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourcePortRange` to specify the range of source ports.
+   * Deprecated. Use `Permissions.N.SourcePortRange` to specify the source port range.
    * 
    * @example
    * 22/22

package/src/models/RevokeSecurityGroupEgressResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class RevokeSecurityGroupEgressResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3****