@alicloud/ecs20140526 7.8.5 → 7.9.0

package/dist/models/ModifyPrepayInstanceSpecRequest.d.ts

@@ -2,13 +2,11 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifyPrepayInstanceSpecRequestSystemDisk extends $dara.Model {
     /**
      * @remarks
-     * The new category of the system disk. Valid values:
+     * The new system disk category. Valid values:
      *
-     * - cloud_efficiency: utra disk
-     *
-     * - cloud_ssd: standard SSD
-     *
-     * > This parameter takes effect on an instance only when you change from a [retired instance type](https://help.aliyun.com/document_detail/55263.html) to an instance type in an [instance family available for purchase](https://help.aliyun.com/document_detail/25378.html) and upgrade the instance from a non-I/O optimized instance type to an I/O optimized instance type.
+     * - cloud_efficiency: ultra disk.
+     * - cloud_ssd: standard SSD.
+     * > This parameter is valid only when you perform an Increase Quota from a [retired instance type](https://help.aliyun.com/document_detail/55263.html) to a [Normal instance family](https://help.aliyun.com/document_detail/25378.html) and change a non-I/O optimization instance to an I/O optimization instance.
      *
      * @example
      * cloud_efficiency
@@ -65,21 +63,15 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     systemDisk?: ModifyPrepayInstanceSpecRequestSystemDisk;
     /**
      * @remarks
-     * Specifies whether to enable automatic payment when you upgrade the instance type. Valid values:
+     * Specifies whether to automatically complete the payment when you upgrade the instance type. Valid values:
      *
      * - true: The payment is automatically completed.
-     *
-     * - false: An order is generated but no payment is made.
+     * - false: Only an order is created. No payment is made.
      *
      * Default value: true.
-     *
-     * >
-     *
-     * - Make sure that your account balance is sufficient. Otherwise, your order becomes invalid and must be canceled.
-     *
-     * - If your account balance is insufficient, you can set `AutoPay` to `false` to generate an unpaid order. Then, you can log on to the ECS console to pay for the order.
-     *
-     * - If you set `OperatorType` to `downgrade`, `AutoPay` is ignored.
+     * > - If automatic payment is enabled, make sure that your payment method has a sufficient balance. Otherwise, an abnormal order is generated, and you can only cancel the order.
+     * > - If your payment method balance is insufficient, you can set `AutoPay` to `false` to generate an unpaid order. Then, you can logon to the ECS console to pay for the order.
+     * > - When `OperatorType` is set to `downgrade`, the `AutoPay` parameter is ignored.
      *
      * @example
      * true
@@ -87,7 +79,7 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     autoPay?: boolean;
     /**
      * @remarks
-     * The client token that you want to use to ensure the idempotency of the request. You can use the client to generate the value, but make sure that the value is unique among different requests. This value allows only ASCII characters and is up to 64 characters in length. For more information, see [How do I ensure the idempotence of a request?](https://help.aliyun.com/document_detail/25693.html)
+     * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The ClientToken value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
      *
      * @example
      * 123e4567-e89b-12d3-a456-426655440000
@@ -100,7 +92,7 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     disk?: ModifyPrepayInstanceSpecRequestDisk[];
     /**
      * @remarks
-     * The end time of the temporary change. The time follows the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC.
+     * The end time of the temporary instance type change. Specify the time in the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mmZ format. The time must be in UTC.
      *
      * @example
      * 2018-01-01T12:05Z
@@ -118,7 +110,7 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     instanceId?: string;
     /**
      * @remarks
-     * The new instance type. For information about available instance types, see [Instance families](https://help.aliyun.com/document_detail/25378.html) or call the [DescribeInstanceTypes](https://help.aliyun.com/document_detail/25620.html) operation.
+     * The target instance type for the Upgrade/Downgrade. For more information, see [Instance family](https://help.aliyun.com/document_detail/25378.html) or invoke [DescribeInstanceTypes](https://help.aliyun.com/document_detail/25620.html).
      *
      * This parameter is required.
      *
@@ -128,23 +120,15 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     instanceType?: string;
     /**
      * @remarks
-     * Specifies whether to allow cross-cluster instance type upgrade. Valid values:
-     *
-     * - true
-     *
-     * - false
+     * Specifies whether to support cross-cluster instance type changes. Valid values:
+     * - true: supported.
+     * - false: not supported.
      *
      * Default value: false.
      *
-     * When you set `MigrateAcrossZone` to `true` and you upgrade the instance type of an instance based on the returned information, take note of the following items:
-     *
-     * Instance that resides in the classic network:
-     *
-     * - For [retired instance types](https://help.aliyun.com/document_detail/55263.html), when a non-I/O optimized instance is upgraded to an I/O optimized instance, the private IP address, disk device names, and software authorization codes of the instance change. For a Linux instance, basic disks (cloud) are identified as xvd\\* such as xvda and xvdb, and ultra disks (cloud_efficiency) and standard SSDs (cloud_ssd) are identified as vd\\* such as vda and vdb.
+     * When the `MigrateAcrossZone` parameter is set to `true`, take note of the following items after you perform the optimization on the Elastic Compute Service instance based on the response:
      *
-     * - For [instance families available for purchase](https://help.aliyun.com/document_detail/25378.html), when the instance type of an instance is changed, the private IP address of the instance changes.
-     *
-     * Instance that resides in a virtual private cloud (VPC): For [retired instance types](https://help.aliyun.com/document_detail/55263.html), when a non-I/O optimized instance is upgraded to an I/O optimized instance, the disk device names and software authorization codes of the instance change. For a Linux instance, basic disks (cloud) are identified as xvd\\* such as xvda and xvdb, and ultra disks (cloud_efficiency) and standard SSDs (cloud_ssd) are identified as vd\\* such as vda and vdb.
+     * VPC-type instances: For [retired instance types](https://help.aliyun.com/document_detail/55263.html), when a non-I/O optimized instance is changed to an I/O optimized instance, the disk device names and software authorization codes of the server change. For Linux instances, basic disks (cloud) are identified as xvda or xvdb. Ultra disks (cloud_efficiency) and standard SSDs (cloud_ssd) are identified as vda or vdb.
      *
      * @example
      * false
@@ -160,15 +144,14 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     modifyMode?: string;
     /**
      * @remarks
-     * The type of the change to the instance. Valid values:
-     *
-     * > This parameter is optional. The system can automatically determine whether the instance change is an upgrade or a downgrade. If you want to specify this parameter, refer to the following valid values of the parameter.
+     * The type of the operation. Valid values:
+     * > This parameter is optional. The system can automatically determine whether the operation is an upgrade or a downgrade. If you upload this parameter, follow the rules below.
      *
-     * - upgrade: upgrades the instance type. Make sure that the balance in your account is sufficient.
+     * - upgrade: upgrades the instance type. Make sure that your account payment method has a sufficient balance.
      *
-     * - downgrade: downgrades the instance type. When the new instance type specified by the `InstanceType` parameter has lower specifications than the current instance type, set `OperatorType` to downgrade.
+     * - downgrade: decrease the quota of the instance type. When the instance type specified by `InstanceType` is lower than the current instance type, set `OperatorType` to `downgrade`.
      *
-     * > You can refer to the preceding usage notes on how to upgrade or downgrade the instance type.
+     * > For precautions about upgrading or downgrading instance types, see the operation description section above.
      *
      * @example
      * upgrade
@@ -178,7 +161,7 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     ownerId?: number;
     /**
      * @remarks
-     * The restart time of the instance. The time follows the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC.
+     * The restart time of the instance. Specify the time in the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mmZ format. The time must be in UTC.
      *
      * @example
      * 2018-01-01T12:05Z
@@ -186,15 +169,14 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     rebootTime?: string;
     /**
      * @remarks
-     * Specifies whether to restart the instance immediately after the instance type is changed. Valid values:
-     *
-     * - true
+     * Specifies whether to immediately restart the instance after the instance type change is complete. Valid values:
      *
-     * - false
+     * - true: The instance is immediately restarted.
+     * - false: The instance is not restarted.
      *
      * Default value: false.
      *
-     * > If the instance is in the **Stopped** state, the instance remains in the Stopped state and no operations are performed, regardless of whether `RebootWhenFinished` is set to true.
+     * > If the instance is in the **Stopped** state, the instance remains stopped even if you set `RebootWhenFinished` to `true`. No operation is performed.
      *
      * @example
      * false
@@ -202,7 +184,7 @@ export declare class ModifyPrepayInstanceSpecRequest extends $dara.Model {
     rebootWhenFinished?: boolean;
     /**
      * @remarks
-     * The region ID of the instance. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+     * The region ID of the instance. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
      *
      * This parameter is required.
      *

package/dist/models/ModifyPrepayInstanceSpecRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"ModifyPrepayInstanceSpecRequest.js","sourceRoot":"","sources":["../../src/models/ModifyPrepayInstanceSpecRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,yCAA0C,SAAQ,KAAK,CAAC,KAAK;IAexE,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,UAAU;SACrB,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,QAAQ;SACnB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAlCD,8FAkCC;AAED,MAAa,mCAAoC,SAAQ,KAAK,CAAC,KAAK;IAyBlE,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,UAAU;YACpB,MAAM,EAAE,QAAQ;YAChB,gBAAgB,EAAE,kBAAkB;SACrC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,QAAQ;YAClB,MAAM,EAAE,QAAQ;YAChB,gBAAgB,EAAE,QAAQ;SAC3B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhDD,kFAgDC;AAED,MAAa,+BAAgC,SAAQ,KAAK,CAAC,KAAK;IAuJ9D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,UAAU,EAAE,YAAY;YACxB,OAAO,EAAE,SAAS;YAClB,WAAW,EAAE,aAAa;YAC1B,IAAI,EAAE,MAAM;YACZ,OAAO,EAAE,SAAS;YAClB,UAAU,EAAE,YAAY;YACxB,YAAY,EAAE,cAAc;YAC5B,iBAAiB,EAAE,mBAAmB;YACtC,UAAU,EAAE,YAAY;YACxB,YAAY,EAAE,cAAc;YAC5B,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,UAAU,EAAE,YAAY;YACxB,kBAAkB,EAAE,oBAAoB;YACxC,QAAQ,EAAE,UAAU;YACpB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;SACnC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,UAAU,EAAE,yCAAyC;YACrD,OAAO,EAAE,SAAS;YAClB,WAAW,EAAE,QAAQ;YACrB,IAAI,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,mCAAmC,EAAE;YAC1E,OAAO,EAAE,QAAQ;YACjB,UAAU,EAAE,QAAQ;YACpB,YAAY,EAAE,QAAQ;YACtB,iBAAiB,EAAE,SAAS;YAC5B,UAAU,EAAE,QAAQ;YACpB,YAAY,EAAE,QAAQ;YACtB,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,UAAU,EAAE,QAAQ;YACpB,kBAAkB,EAAE,SAAS;YAC7B,QAAQ,EAAE,QAAQ;YAClB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;SAC1B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,IAAI,CAAC,UAAU,IAAI,OAAQ,IAAI,CAAC,UAAkB,CAAC,QAAQ,KAAK,UAAU,EAAE,CAAC;YAC7E,IAAI,CAAC,UAAkB,CAAC,QAAQ,EAAE,CAAC;QACtC,CAAC;QACD,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC;YAC5B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;QACvC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhND,0EAgNC"}
+{"version":3,"file":"ModifyPrepayInstanceSpecRequest.js","sourceRoot":"","sources":["../../src/models/ModifyPrepayInstanceSpecRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,yCAA0C,SAAQ,KAAK,CAAC,KAAK;IAaxE,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,UAAU;SACrB,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,QAAQ;SACnB,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhCD,8FAgCC;AAED,MAAa,mCAAoC,SAAQ,KAAK,CAAC,KAAK;IAyBlE,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,UAAU;YACpB,MAAM,EAAE,QAAQ;YAChB,gBAAgB,EAAE,kBAAkB;SACrC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,QAAQ,EAAE,QAAQ;YAClB,MAAM,EAAE,QAAQ;YAChB,gBAAgB,EAAE,QAAQ;SAC3B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhDD,kFAgDC;AAED,MAAa,+BAAgC,SAAQ,KAAK,CAAC,KAAK;IAuI9D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,UAAU,EAAE,YAAY;YACxB,OAAO,EAAE,SAAS;YAClB,WAAW,EAAE,aAAa;YAC1B,IAAI,EAAE,MAAM;YACZ,OAAO,EAAE,SAAS;YAClB,UAAU,EAAE,YAAY;YACxB,YAAY,EAAE,cAAc;YAC5B,iBAAiB,EAAE,mBAAmB;YACtC,UAAU,EAAE,YAAY;YACxB,YAAY,EAAE,cAAc;YAC5B,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,UAAU,EAAE,YAAY;YACxB,kBAAkB,EAAE,oBAAoB;YACxC,QAAQ,EAAE,UAAU;YACpB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;SACnC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,UAAU,EAAE,yCAAyC;YACrD,OAAO,EAAE,SAAS;YAClB,WAAW,EAAE,QAAQ;YACrB,IAAI,EAAE,EAAE,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,mCAAmC,EAAE;YAC1E,OAAO,EAAE,QAAQ;YACjB,UAAU,EAAE,QAAQ;YACpB,YAAY,EAAE,QAAQ;YACtB,iBAAiB,EAAE,SAAS;YAC5B,UAAU,EAAE,QAAQ;YACpB,YAAY,EAAE,QAAQ;YACtB,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,UAAU,EAAE,QAAQ;YACpB,kBAAkB,EAAE,SAAS;YAC7B,QAAQ,EAAE,QAAQ;YAClB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;SAC1B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,IAAG,IAAI,CAAC,UAAU,IAAI,OAAQ,IAAI,CAAC,UAAkB,CAAC,QAAQ,KAAK,UAAU,EAAE,CAAC;YAC7E,IAAI,CAAC,UAAkB,CAAC,QAAQ,EAAE,CAAC;QACtC,CAAC;QACD,IAAG,KAAK,CAAC,OAAO,CAAC,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC;YAC5B,KAAK,CAAC,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;QACvC,CAAC;QACD,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAhMD,0EAgMC"}

package/dist/models/ModifyPrepayInstanceSpecResponseBody.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifyPrepayInstanceSpecResponseBody extends $dara.Model {
     /**
      * @remarks
-     * The ID of the order.
+     * The order ID.
      *
      * @example
      * 1234567890
@@ -10,7 +10,7 @@ export declare class ModifyPrepayInstanceSpecResponseBody extends $dara.Model {
     orderId?: string;
     /**
      * @remarks
-     * The ID of the request.
+     * The request ID.
      *
      * @example
      * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E

package/dist/models/ModifySecurityGroupAttributeRequest.d.ts

@@ -2,9 +2,9 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifySecurityGroupAttributeRequest extends $dara.Model {
     /**
      * @remarks
-     * The new description of the security group. The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
+     * The description of the security group. The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
      *
-     * By default, the parameter is empty, which indicates that the description remains unchanged.
+     * Default value: null. The description is not modified.
      *
      * @example
      * TestDescription
@@ -14,7 +14,7 @@ export declare class ModifySecurityGroupAttributeRequest extends $dara.Model {
     ownerId?: number;
     /**
      * @remarks
-     * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+     * The region ID. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
      *
      * This parameter is required.
      *
@@ -36,9 +36,9 @@ export declare class ModifySecurityGroupAttributeRequest extends $dara.Model {
     securityGroupId?: string;
     /**
      * @remarks
-     * The new name of the security group. The name must be 2 to 128 characters in length. The name must start with a letter and cannot start with `http://` or `https://`. The name can contain letters, digits, colons (:), underscores (_), periods (.), and hyphens (-).
+     * The name of the security group. The name must be 2 to 128 characters in length and must start with a letter or a Chinese character. It cannot start with `http://` or `https://`. The name can contain characters that are categorized as letters in Unicode, including Chinese characters, and digits. The name can also contain colons (:), underscores (_), periods (.), or hyphens (-).
      *
-     * By default, the parameter is empty, which indicates that the name remains unchanged.
+     * Default value: null. The name is not modified.
      *
      * @example
      * SecurityGroupTestName

package/dist/models/ModifySecurityGroupEgressRuleRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     /**
      * @remarks
-     * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters and cannot exceed 64 characters in length.\\*\\*\\*\\* For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+     * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
      *
      * @example
      * 123e4567-e89b-12d3-a456-426655440000
@@ -18,9 +18,9 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     description?: string;
     /**
      * @remarks
-     * The destination IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.
+     * The destination IPv4 Classless Inter-Domain Routing (CIDR) block. CIDR format and IPv4 format IP address range are supported.
      *
-     * By default, this parameter is left empty.
+     * Default value: null.
      *
      * @example
      * 10.0.0.0/8
@@ -28,12 +28,10 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     destCidrIp?: string;
     /**
      * @remarks
-     * The ID of the destination security group. You must specify at least one of `DestGroupId` and `DestCidrIp`.
-     *
-     * - At least one of DestGroupId, DestCidrIp, Ipv6DestCidrIp, and DestPrefixListId must be specified.
-     *
-     * - If DestGroupId is specified but DestCidrIp is not specified, the NicType parameter can be set only to intranet.
+     * The ID of the destination security group to which you want to grant access permissions. Specify at least one of `DestGroupId` and `DestCidrIp`.
      *
+     * - Specify at least one of DestGroupId, DestCidrIp, Ipv6DestCidrIp, and DestPrefixListId.
+     * - If DestGroupId is specified but DestCidrIp is not specified, the NicType parameter can only be set to intranet.
      * - If both DestGroupId and DestCidrIp are specified, DestCidrIp takes precedence.
      *
      * @example
@@ -42,7 +40,7 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     destGroupId?: string;
     /**
      * @remarks
-     * The Alibaba Cloud account that manages the destination security group when you set security group rule N across accounts.
+     * The Alibaba Cloud account that owns the destination security group when you set a cross-account security group rule.
      *
      * @example
      * EcsforCloud@Alibaba.com
@@ -50,7 +48,7 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     destGroupOwnerAccount?: string;
     /**
      * @remarks
-     * The ID of the Alibaba Cloud account that manages the destination security group when you set security group rule N across accounts.
+     * The ID of the Alibaba Cloud account that owns the destination security group when you set a cross-account security group rule.
      *
      * @example
      * 1234567890
@@ -58,9 +56,9 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     destGroupOwnerId?: number;
     /**
      * @remarks
-     * The ID of the destination prefix list. You can call the [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) operation to query the IDs of available prefix lists.
+     * The ID of the destination prefix list. You can call [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) to query available prefix list IDs.
      *
-     * If you specify `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId`, this parameter is ignored.
+     * This parameter is ignored if you specify one of `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId`.
      *
      * @example
      * pl-x1j1k5ykzqlixdcy****
@@ -68,34 +66,20 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     destPrefixListId?: string;
     /**
      * @remarks
-     * Network Layer /transport layer protocol. Two types of assignments are supported:
-     *
-     * 1. The case-insensitive protocol name. Valid values:
-     *
+     * The network layer or transport layer protocol. Two types of values are supported:
+     * 1. Case-insensitive protocol names. Valid values:
      * - ICMP
-     *
      * - GRE
-     *
      * - TCP
-     *
      * - UDP
-     *
-     * - ALL: supports all protocols.
-     *
-     * 2. The value of the IANA-compliant protocol number, which is an integer from 0 to 255. List of regions currently available:
-     *
-     * - Philippines (Manila)
-     *
+     * - ALL: all protocols are supported.
+     * 2. Protocol numbers that comply with the IANA specification, which are integers from 0 to 255. The following regions currently support this feature:
+     * - Philippines
      * - UK (London)
-     *
-     * - Malaysia (Kuala Lumpur)
-     *
+     * - Malaysia
      * - China (Hohhot)
-     *
      * - China (Qingdao)
-     *
-     * - US (Silicon Valley)
-     *
+     * - US (Virginia)
      * - Singapore
      *
      * @example
@@ -104,11 +88,11 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     ipProtocol?: string;
     /**
      * @remarks
-     * The destination IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
+     * The destination IPv6 Classless Inter-Domain Routing (CIDR) block. CIDR format and IPv6 format IP address range are supported.
      *
-     * > Only the IP addresses of instances in virtual private clouds (VPCs) are supported. You cannot specify both Ipv6DestCidrIp and `DestCidrIp`.
+     * > Only VPC-type IP addresses are supported. This parameter and `DestCidrIp` cannot be specified at the same time. Settings for both parameters simultaneously are not allowed.
      *
-     * By default, this parameter is left empty.
+     * Default value: null.
      *
      * @example
      * 2001:db8:1233:1a00::***
@@ -116,11 +100,11 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     ipv6DestCidrIp?: string;
     /**
      * @remarks
-     * The source IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
+     * The source IPv6 Classless Inter-Domain Routing (CIDR) block. CIDR format and IPv6 format IP address range are supported.
      *
-     * > Only the IP addresses of instances in VPCs are supported. You cannot specify both Ipv6SourceCidrIp and `SourceCidrIp`.
+     * > Only VPC-type IP addresses are supported. This parameter and `SourceCidrIp` cannot be specified at the same time. Settings for both parameters simultaneously are not allowed.
      *
-     * By default, this parameter is left empty.
+     * Default value: null.
      *
      * @example
      * 2001:db8:1234:1a00::***
@@ -128,9 +112,9 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     ipv6SourceCidrIp?: string;
     /**
      * @remarks
-     * The network interface controller (NIC) type.
+     * The network interface type.
      *
-     * > You cannot modify this parameter when you modify a security group rule by specifying the ID of the rule. If you want to change the NIC type of a security group rule, you can create a security group rule of a desired NIC type and delete the existing rule.
+     * > When you modify a rule by specifying the security group rule ID, this parameter cannot be modified. To make such a change, add a new rule and then delete the current rule.
      *
      * @example
      * intranet
@@ -140,11 +124,10 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     ownerId?: number;
     /**
      * @remarks
-     * The action of the security group rule. Valid values:
-     *
-     * - accept: allows access.
+     * The access permissions. Valid values:
      *
-     * - drop: denies access and returns no responses.
+     * - accept: accepts access.
+     * - drop: deny access and does not return a rejection response.
      *
      * Default value: accept.
      *
@@ -156,13 +139,10 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
      * @remarks
      * The range of destination ports that correspond to the transport layer protocol. Valid values:
      *
-     * - If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-     *
-     * - If you set IpProtocol to ICMP, the port number range is -1/-1.
-     *
-     * - If you set IpProtocol to GRE, the port number range is -1/-1.
-     *
-     * - If you set IpProtocol to ALL, the port number range is -1/-1.
+     * - For TCP/UDP: valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+     * - For ICMP: -1/-1.
+     * - For GRE: -1/-1.
+     * - For ALL: -1/-1.
      *
      * @example
      * 80/80
@@ -170,11 +150,12 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     portRange?: string;
     /**
      * @remarks
-     * The ID of the port list. You can call the `DescribePortRangeLists` operation to query the IDs of available prefix lists.
+     * The port address book ID.
+     * You can call `DescribePortRangeLists` to query available port address book IDs.
      *
-     * - If you specify PortRange, the value of this parameter is ignored.
+     * This parameter is ignored if you specify the PortRange parameter.
      *
-     * - If the security group is of the classic network type, you cannot reference port lists in the security group rules. For information about the limits on security groups and port lists, see the [Security groups](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas" topic.
+     * For more information, see [Security group limits](~~25412#SecurityGroupQuota1~~).
      *
      * @example
      * prl-2ze9743****
@@ -192,7 +173,7 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     priority?: string;
     /**
      * @remarks
-     * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+     * The region ID of the source security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
      *
      * This parameter is required.
      *
@@ -204,7 +185,7 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     resourceOwnerId?: number;
     /**
      * @remarks
-     * The ID of the security group.
+     * The security group ID.
      *
      * This parameter is required.
      *
@@ -214,7 +195,7 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     securityGroupId?: string;
     /**
      * @remarks
-     * The ID of the security group rule. You can call the [DescribeSecurityGroupAttribute](https://help.aliyun.com/document_detail/2679845.html) operation to query the IDs of security group rules in a security group.
+     * The security group rule ID. You can call [DescribeSecurityGroupAttribute](https://help.aliyun.com/document_detail/2679845.html) to query the security group rule ID.
      *
      * @example
      * sgr-bp67acfmxazb4q****
@@ -222,9 +203,9 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
     securityGroupRuleId?: string;
     /**
      * @remarks
-     * The source IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.
+     * The source IPv4 Classless Inter-Domain Routing (CIDR) block. CIDR format and IPv4 format IP address range are supported.
      *
-     * By default, this parameter is left empty.
+     * Default value: null.
      *
      * @example
      * 10.0.0.0/8
@@ -234,13 +215,10 @@ export declare class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
      * @remarks
      * The range of source ports that correspond to the transport layer protocol. Valid values:
      *
-     * - If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-     *
-     * - If you set IpProtocol to ICMP, the port number range is -1/-1.
-     *
-     * - If you set IpProtocol to GRE, the port number range is -1/-1.
-     *
-     * - If you set IpProtocol to ALL, the port number range is -1/-1.
+     * - For TCP/UDP: valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+     * - For ICMP: -1/-1.
+     * - For GRE: -1/-1.
+     * - For ALL: -1/-1.
      *
      * @example
      * 80/80

package/dist/models/ModifySecurityGroupEgressRuleRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"ModifySecurityGroupEgressRuleRequest.js","sourceRoot":"","sources":["../../src/models/ModifySecurityGroupEgressRuleRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,oCAAqC,SAAQ,KAAK,CAAC,KAAK;IAuPnE,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,aAAa;YAC1B,UAAU,EAAE,YAAY;YACxB,WAAW,EAAE,aAAa;YAC1B,qBAAqB,EAAE,uBAAuB;YAC9C,gBAAgB,EAAE,kBAAkB;YACpC,gBAAgB,EAAE,kBAAkB;YACpC,UAAU,EAAE,YAAY;YACxB,cAAc,EAAE,gBAAgB;YAChC,gBAAgB,EAAE,kBAAkB;YACpC,OAAO,EAAE,SAAS;YAClB,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,MAAM,EAAE,QAAQ;YAChB,SAAS,EAAE,WAAW;YACtB,eAAe,EAAE,iBAAiB;YAClC,QAAQ,EAAE,UAAU;YACpB,QAAQ,EAAE,UAAU;YACpB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;YAClC,eAAe,EAAE,iBAAiB;YAClC,mBAAmB,EAAE,qBAAqB;YAC1C,YAAY,EAAE,cAAc;YAC5B,eAAe,EAAE,iBAAiB;SACnC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,WAAW,EAAE,QAAQ;YACrB,UAAU,EAAE,QAAQ;YACpB,WAAW,EAAE,QAAQ;YACrB,qBAAqB,EAAE,QAAQ;YAC/B,gBAAgB,EAAE,QAAQ;YAC1B,gBAAgB,EAAE,QAAQ;YAC1B,UAAU,EAAE,QAAQ;YACpB,cAAc,EAAE,QAAQ;YACxB,gBAAgB,EAAE,QAAQ;YAC1B,OAAO,EAAE,QAAQ;YACjB,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,MAAM,EAAE,QAAQ;YAChB,SAAS,EAAE,QAAQ;YACnB,eAAe,EAAE,QAAQ;YACzB,QAAQ,EAAE,QAAQ;YAClB,QAAQ,EAAE,QAAQ;YAClB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;YACzB,eAAe,EAAE,QAAQ;YACzB,mBAAmB,EAAE,QAAQ;YAC7B,YAAY,EAAE,QAAQ;YACtB,eAAe,EAAE,QAAQ;SAC1B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAxTD,oFAwTC"}
+{"version":3,"file":"ModifySecurityGroupEgressRuleRequest.js","sourceRoot":"","sources":["../../src/models/ModifySecurityGroupEgressRuleRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,oCAAqC,SAAQ,KAAK,CAAC,KAAK;IAiOnE,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,WAAW,EAAE,aAAa;YAC1B,UAAU,EAAE,YAAY;YACxB,WAAW,EAAE,aAAa;YAC1B,qBAAqB,EAAE,uBAAuB;YAC9C,gBAAgB,EAAE,kBAAkB;YACpC,gBAAgB,EAAE,kBAAkB;YACpC,UAAU,EAAE,YAAY;YACxB,cAAc,EAAE,gBAAgB;YAChC,gBAAgB,EAAE,kBAAkB;YACpC,OAAO,EAAE,SAAS;YAClB,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,MAAM,EAAE,QAAQ;YAChB,SAAS,EAAE,WAAW;YACtB,eAAe,EAAE,iBAAiB;YAClC,QAAQ,EAAE,UAAU;YACpB,QAAQ,EAAE,UAAU;YACpB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;YAClC,eAAe,EAAE,iBAAiB;YAClC,mBAAmB,EAAE,qBAAqB;YAC1C,YAAY,EAAE,cAAc;YAC5B,eAAe,EAAE,iBAAiB;SACnC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,WAAW,EAAE,QAAQ;YACrB,UAAU,EAAE,QAAQ;YACpB,WAAW,EAAE,QAAQ;YACrB,qBAAqB,EAAE,QAAQ;YAC/B,gBAAgB,EAAE,QAAQ;YAC1B,gBAAgB,EAAE,QAAQ;YAC1B,UAAU,EAAE,QAAQ;YACpB,cAAc,EAAE,QAAQ;YACxB,gBAAgB,EAAE,QAAQ;YAC1B,OAAO,EAAE,QAAQ;YACjB,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,MAAM,EAAE,QAAQ;YAChB,SAAS,EAAE,QAAQ;YACnB,eAAe,EAAE,QAAQ;YACzB,QAAQ,EAAE,QAAQ;YAClB,QAAQ,EAAE,QAAQ;YAClB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;YACzB,eAAe,EAAE,QAAQ;YACzB,mBAAmB,EAAE,QAAQ;YAC7B,YAAY,EAAE,QAAQ;YACtB,eAAe,EAAE,QAAQ;SAC1B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAlSD,oFAkSC"}

package/dist/models/ModifySecurityGroupPolicyRequest.d.ts

@@ -2,7 +2,7 @@ import * as $dara from '@darabonba/typescript';
 export declare class ModifySecurityGroupPolicyRequest extends $dara.Model {
     /**
      * @remarks
-     * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **token** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+     * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
      *
      * @example
      * 123e4567-e89b-12d3-a456-426655440000
@@ -10,13 +10,12 @@ export declare class ModifySecurityGroupPolicyRequest extends $dara.Model {
     clientToken?: string;
     /**
      * @remarks
-     * The internal access control policy of the security group. Valid values:
+     * The internal connectivity policy between ECS instances in the security group. Valid values:
      *
-     * - Accept: the internal interconnectivity policy
+     * - Accept: intra-group connectivity
+     * - Drop: internal isolation
      *
-     * - Drop: the internal isolation policy
-     *
-     * > The value of this parameter is case-insensitive.
+     * >The value is case-insensitive.
      *
      * This parameter is required.
      *
@@ -28,7 +27,7 @@ export declare class ModifySecurityGroupPolicyRequest extends $dara.Model {
     ownerId?: number;
     /**
      * @remarks
-     * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+     * The region ID of the security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
      *
      * This parameter is required.
      *

package/dist/models/ModifySecurityGroupPolicyRequest.js.map

@@ -1 +1 @@
-{"version":3,"file":"ModifySecurityGroupPolicyRequest.js","sourceRoot":"","sources":["../../src/models/ModifySecurityGroupPolicyRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,gCAAiC,SAAQ,KAAK,CAAC,KAAK;IAiD/D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,iBAAiB,EAAE,mBAAmB;YACtC,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,QAAQ,EAAE,UAAU;YACpB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;YAClC,eAAe,EAAE,iBAAiB;SACnC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,iBAAiB,EAAE,QAAQ;YAC3B,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,QAAQ,EAAE,QAAQ;YAClB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;YACzB,eAAe,EAAE,QAAQ;SAC1B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAlFD,4EAkFC"}
+{"version":3,"file":"ModifySecurityGroupPolicyRequest.js","sourceRoot":"","sources":["../../src/models/ModifySecurityGroupPolicyRequest.ts"],"names":[],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAAA,6CAA6C;AAC7C,6DAA+C;AAG/C,MAAa,gCAAiC,SAAQ,KAAK,CAAC,KAAK;IAgD/D,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,aAAa;YAC1B,iBAAiB,EAAE,mBAAmB;YACtC,YAAY,EAAE,cAAc;YAC5B,OAAO,EAAE,SAAS;YAClB,QAAQ,EAAE,UAAU;YACpB,oBAAoB,EAAE,sBAAsB;YAC5C,eAAe,EAAE,iBAAiB;YAClC,eAAe,EAAE,iBAAiB;SACnC,CAAC;IACJ,CAAC;IAED,MAAM,CAAC,KAAK;QACV,OAAO;YACL,WAAW,EAAE,QAAQ;YACrB,iBAAiB,EAAE,QAAQ;YAC3B,YAAY,EAAE,QAAQ;YACtB,OAAO,EAAE,QAAQ;YACjB,QAAQ,EAAE,QAAQ;YAClB,oBAAoB,EAAE,QAAQ;YAC9B,eAAe,EAAE,QAAQ;YACzB,eAAe,EAAE,QAAQ;SAC1B,CAAC;IACJ,CAAC;IAED,QAAQ;QACN,KAAK,CAAC,QAAQ,EAAE,CAAC;IACnB,CAAC;IAED,YAAY,GAA4B;QACtC,KAAK,CAAC,GAAG,CAAC,CAAC;IACb,CAAC;CACF;AAjFD,4EAiFC"}