@alicloud/ecs20140526 7.8.5 → 7.9.0

package/src/models/ModifyAutoSnapshotPolicyExRequest.ts

@@ -62,9 +62,8 @@ export class ModifyAutoSnapshotPolicyExRequestCopyEncryptionConfiguration extend
    * @remarks
    * Specifies whether to enable encryption for cross-region snapshot replication. Valid values:
    * 
-   * - true
-   * 
-   * - false
+   * - true: enabled. 
+   * - false: disabled. 
    * 
    * Default value: false.
    * 
@@ -74,7 +73,7 @@ export class ModifyAutoSnapshotPolicyExRequestCopyEncryptionConfiguration extend
   encrypted?: boolean;
   /**
    * @remarks
-   * The ID of the KMS key used for encryption in cross-region snapshot replication.
+   * The key ID of the KMS key used for encrypted cross-region snapshot replication.
    * 
    * @example
    * 0e478b7a-4262-4802-b8cb-00d3fb40826X
@@ -111,11 +110,10 @@ export class ModifyAutoSnapshotPolicyExRequestCopyEncryptionConfiguration extend
 export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   /**
    * @remarks
-   * The retention period of the snapshot copy in the destination region. Unit: days. Valid values:
-   * 
-   * - -1: The snapshot copy is retained until it is deleted.
+   * The retention period of cross-region snapshot replicas. Unit: days. Valid values:
    * 
-   * - 1 to 65535: The snapshot copy is retained for a specified number of days.
+   * - -1: permanently retained.
+   * - 1 to 65535: the specified number of days for which snapshot replicas are retained.
    * 
    * Default value: -1.
    * 
@@ -125,16 +123,15 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   copiedSnapshotsRetentionDays?: number;
   /**
    * @remarks
-   * The encryption configurations for cross-region snapshot replication.
+   * The encryption parameter for cross-region snapshot replication.
    */
   copyEncryptionConfiguration?: ModifyAutoSnapshotPolicyExRequestCopyEncryptionConfiguration;
   /**
    * @remarks
-   * Specifies whether to enable cross-region replication for the automatic snapshot.
-   * 
-   * - true: enables cross-region replication for the automatic snapshot.
+   * Specifies whether to allow automatic cross-region replication.
    * 
-   * - false: disables cross-region replication for the automatic snapshot.
+   * - true: allowed.
+   * - false: not allowed.
    * 
    * @example
    * false
@@ -145,7 +142,7 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The destination region to which to copy the snapshot. You can specify only a single destination region.
+   * The destination region for cross-region snapshot replication. You can set one destination region.
    * 
    * @example
    * ["cn-hangzhou"]
@@ -153,7 +150,7 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   targetCopyRegions?: string;
   /**
    * @remarks
-   * The ID of the automatic snapshot policy. You can call the [DescribeAutoSnapshotPolicyEx](https://help.aliyun.com/document_detail/25530.html) operation to query available automatic snapshot policies.
+   * The ID of the automatic snapshot policy. You can call [DescribeAutoSnapshotPolicyEx](https://help.aliyun.com/document_detail/25530.html) to query available automatic snapshot policies.
    * 
    * This parameter is required.
    * 
@@ -163,7 +160,7 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   autoSnapshotPolicyId?: string;
   /**
    * @remarks
-   * The name of the automatic snapshot policy. If this parameter is not specified, the original name of the automatic snapshot policy is retained.
+   * The name of the automatic snapshot policy. If this parameter is left empty, the name is not modified.
    * 
    * @example
    * SPTestName
@@ -171,7 +168,7 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   autoSnapshotPolicyName?: string;
   /**
    * @remarks
-   * The region ID of the automatic snapshot policy. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the automatic snapshot policy. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 
@@ -181,13 +178,12 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   regionId?: string;
   /**
    * @remarks
-   * The days of the week on which to create automatic snapshots. Valid values are 1 to 7, which correspond to the days of the week. For example, a value of 1 indicates Monday.
+   * The days of the week on which automatic snapshots are created. Unit: days. The cycle is weekly. Valid values: 1 to 7. For example, 1 indicates Monday.
    * 
-   * To schedule multiple automatic snapshots to be created in a week, you can specify multiple days.
+   * To create multiple automatic snapshots within a week, specify multiple days:
    * 
-   * - You can specify up to seven days over a one-week period.
-   * 
-   * - You must set this parameter to a JSON array such as `["1", "2" ... "7"]`. Separate the values in the array with commas (,).
+   * - You can specify up to 7 days.
+   * - Specify multiple days in a JSON array in the format of `"1", "2", … "7"`. Separate the days with commas (,).
    * 
    * @example
    * ["1", "7"]
@@ -195,11 +191,10 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   repeatWeekdays?: string;
   /**
    * @remarks
-   * The retention period of the automatic snapshot. Unit: days. Valid values:
-   * 
-   * - -1: The automatic snapshot is permanently retained.
+   * The retention period of automatic snapshots. Unit: days. Valid values:
    * 
-   * - 1 to 65536: The auto snapshot is retained for the specified number of days.
+   * - -1: permanently retained.
+   * - 1 to 65536: the specified number of days for which snapshots are retained.
    * 
    * Default value: -1.
    * 
@@ -209,13 +204,12 @@ export class ModifyAutoSnapshotPolicyExRequest extends $dara.Model {
   retentionDays?: number;
   /**
    * @remarks
-   * The points in time of the day at which to create automatic snapshots. The time must be in UTC+8. Unit: hours. Valid values are 0 to 23, which correspond to the 24 points in time on the hour from 00:00:00 to 23:00:00. For example, a value of 1 indicates 01:00:00.
+   * The points in time at which automatic snapshots are created. The time is displayed in UTC+8. Unit: hours. Valid values: 0 to 23, which correspond to the 24 points in time from 00:00 to 23:00. For example, 1 indicates 01:00.
    * 
-   * To schedule multiple automatic snapshots to be created in a day, you can specify multiple hours.
+   * To create multiple automatic snapshots within a day, specify multiple points in time:
    * 
    * - You can specify up to 24 points in time.
-   * 
-   * - You must set this parameter to a JSON array such as `["0", "1", ... "23"]`. Separate the points in time with commas (,).
+   * - Specify multiple points in time in a JSON array in the format of `"0", "1", … "23"`. Separate the points in time with commas (,).
    * 
    * @example
    * ["0", "1"]

package/src/models/ModifyAutoSnapshotPolicyExResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyAutoSnapshotPolicyExResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E

package/src/models/ModifyDiskAttributeRequest.ts

@@ -5,13 +5,12 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyDiskAttributeRequest extends $dara.Model {
   /**
    * @remarks
-   * Specifies whether to enable performance burst for the disk if the disk supports performance burst. Valid values:
+   * Specifies whether to enable the performance burst feature for disks that support this feature. Valid values:
    * 
-   * - true
+   * - true: Enabled.
+   * - false: Disabled.
    * 
-   * - false
-   * 
-   * > An error is reported if you specify this parameter for a disk that does not support performance burst.
+   * > An error is returned if you specify this parameter for a disk that does not support the performance burst feature.
    * 
    * @example
    * false
@@ -19,13 +18,13 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   burstingEnabled?: boolean;
   /**
    * @remarks
-   * Specifies whether to delete the automatic snapshots of the disk when the disk is released. Valid values:
+   * Specifies whether to delete the automatic snapshots of the disk when the disk is deleted. Valid values:
    * 
-   * - true
+   * - true: Enabled.
    * 
-   * - false
+   * - false: Disabled.
    * 
-   * This parameter is empty by default, which indicates that the current value remains unchanged.
+   * Default value: null, which indicates that the current value is not changed.
    * 
    * @example
    * false
@@ -33,17 +32,16 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   deleteAutoSnapshot?: boolean;
   /**
    * @remarks
-   * Specifies whether to release the disk together with the associated instance. This parameter is empty by default, which indicates that the current value remains unchanged.
-   * 
-   * An error is returned if you set `DeleteWithInstance` to `false` in one of the following cases:
-   * 
-   * - The disk is a local disk.
+   * Specifies whether to release the disk along with the instance. Default value: null, which indicates that the current value is not changed.
    * 
-   * - The disk is a basic disk and is not removable. If the Portable attribute of a disk is set to false, the disk is not removable.
+   * <props="china">This parameter is not supported for disks that have the multi-attach feature enabled.
    * 
-   * \\*\\*
+   * An error is returned if you set DeleteWithInstance to `false` in either of the following cases: 
+   *          
+   * - The category of the disk is local disk (ephemeral).  
+   * - The category of the disk is basic disk (cloud) and the disk is not detachable (Portable=false).  
    * 
-   * **Warning** If you set DeleteWithInstance to false and the instance to which the disk is attached is locked for security reasons, the DeleteWithInstance attribute of the disk is ignored and the disk is released together with the instance. If "LockReason" : "security" is displayed in the response when you query information about an instance, the instance is locked for security reasons.
+   * >Warning: If you set DeleteWithInstance to false and the ECS instance to which the disk is attached is security-locked with "LockReason" : "security" in OperationLocks, the DeleteWithInstance attribute is ignored and the disk is released along with the instance..
    * 
    * @example
    * false
@@ -51,7 +49,7 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   deleteWithInstance?: boolean;
   /**
    * @remarks
-   * The description of the disk. The description must be 2 to 256 characters in length. It cannot start with `http://` or `https://`.
+   * The description of the disk. The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`.
    * 
    * @example
    * TestDescription
@@ -60,8 +58,7 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   /**
    * @remarks
    * The ID of the disk whose attributes you want to modify.
-   * 
-   * > You can specify `DiskId` or `DiskIds.N`, but not both.
+   * > The DiskId and DiskIds.N parameters cannot be specified at the same time. Specify one of them as needed.
    * 
    * @example
    * d-bp1famypsnar20bv****
@@ -70,8 +67,7 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   /**
    * @remarks
    * The IDs of the disks whose attributes you want to modify. Valid values of N: 0 to 100.
-   * 
-   * > You can specify `DiskId` or `DiskIds.N`, but not both.
+   * > The DiskId and DiskIds.N parameters cannot be specified at the same time. Specify one of them as needed.
    * 
    * @example
    * d-bp1famypsnar20bv****
@@ -79,7 +75,7 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   diskIds?: string[];
   /**
    * @remarks
-   * The name of the disk. The name must be 2 to 128 characters in length and can contain Unicode characters under the Decimal Number category and the categories whose names contain Letter. The name can also contain colons (:), underscores (_), periods (.), and hyphens (-).
+   * The name of the disk. The name must be 2 to 128 characters in length and can contain letters, digits, and characters categorized as letter in Unicode, including Chinese characters. The name can contain colons (:), underscores (_), periods (.), and hyphens (-).
    * 
    * @example
    * MyDiskName
@@ -87,15 +83,14 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   diskName?: string;
   /**
    * @remarks
-   * Specifies whether to enable the automatic snapshot policy feature. Valid values:
-   * 
-   * - true: enables the automatic snapshot policy feature for the cloud disk.
+   * Specifies whether to enable the automatic snapshot policy for the disk. Valid values:
    * 
-   * - false: disables the automatic snapshot policy feature for the cloud disk.
+   * - true: Enabled.
+   * - false: Disabled.
    * 
-   * This parameter is empty by default, which indicates that the current value remains unchanged.
+   * Default value: null, which indicates that the current value is not changed.
    * 
-   * > This parameter is deprecated. By default, the automatic snapshot policy feature is enabled for cloud disks. You only need to apply an automatic snapshot policy to a cloud disk before you can use the automatic snapshot policy.
+   * > This parameter is deprecated. The automatic snapshot policy is enabled by default for disks after they are created. You only need to associate an automatic snapshot policy with the disk.
    * 
    * @example
    * true
@@ -105,7 +100,7 @@ export class ModifyDiskAttributeRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID of the command. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent list of regions.
+   * The region ID. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * @example
    * cn-hangzhou

package/src/models/ModifyDiskAttributeResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyDiskAttributeResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E

package/src/models/ModifyForwardEntryRequest.ts

@@ -3,51 +3,25 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyForwardEntryRequest extends $dara.Model {
-  /**
-   * @remarks
-   * The public IP address for the forward entry.
-   */
   externalIp?: string;
-  /**
-   * @remarks
-   * The external port for the forward entry.
-   */
   externalPort?: string;
   /**
    * @remarks
-   * The ID of the forward entry that you want to modify.
-   * 
    * This parameter is required.
    */
   forwardEntryId?: string;
   /**
    * @remarks
-   * The ID of the forward table.
-   * 
    * This parameter is required.
    */
   forwardTableId?: string;
-  /**
-   * @remarks
-   * The internal IP address for the forward entry.
-   */
   internalIp?: string;
-  /**
-   * @remarks
-   * The internal port for the forward entry.
-   */
   internalPort?: string;
-  /**
-   * @remarks
-   * The IP protocol. Valid values are tcp, udp, and any.
-   */
   ipProtocol?: string;
   ownerAccount?: string;
   ownerId?: number;
   /**
    * @remarks
-   * The ID of the region where the forward table is located.
-   * 
    * This parameter is required.
    */
   regionId?: string;

package/src/models/ModifyForwardEntryResponseBody.ts

@@ -3,10 +3,6 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyForwardEntryResponseBody extends $dara.Model {
-  /**
-   * @remarks
-   * The request ID.
-   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyHaVipAttributeRequest.ts

@@ -3,20 +3,10 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyHaVipAttributeRequest extends $dara.Model {
-  /**
-   * @remarks
-   * A client-generated token used to ensure the idempotence of the request. Make sure that the token is unique across requests. The token can contain only ASCII characters and be no more than 64 characters long.
-   */
   clientToken?: string;
-  /**
-   * @remarks
-   * The new description of the HaVip. The description must be 2 to 256 characters long and must not start with `http://` or `https://`.
-   */
   description?: string;
   /**
    * @remarks
-   * The ID of the HaVip that you want to modify.
-   * 
    * This parameter is required.
    */
   haVipId?: string;
@@ -24,8 +14,6 @@ export class ModifyHaVipAttributeRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The ID of the region where the HaVip is deployed. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/36063.html) operation to obtain the latest list of regions.
-   * 
    * This parameter is required.
    */
   regionId?: string;

package/src/models/ModifyHaVipAttributeResponseBody.ts

@@ -3,10 +3,6 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyHaVipAttributeResponseBody extends $dara.Model {
-  /**
-   * @remarks
-   * The request ID.
-   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/ModifyHpcClusterAttributeRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifyHpcClusterAttributeRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. **The token can contain only ASCII characters and cannot exceed 64 characters in length.** For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -13,9 +13,9 @@ export class ModifyHpcClusterAttributeRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * The description of the HPC cluster. The description must be 2 to 256 characters in length, and cannot start with http\\:// or https\\://.
+   * The description of the HPC cluster. The description must be 2 to 256 characters in length and cannot start with http:// or https://.
    * 
-   * This parameter is empty by default.
+   * Default value: empty.
    * 
    * @example
    * testDescription
@@ -33,9 +33,9 @@ export class ModifyHpcClusterAttributeRequest extends $dara.Model {
   hpcClusterId?: string;
   /**
    * @remarks
-   * The name of the HPC cluster. The name must be 2 to 128 characters in length. The name must start with a letter and cannot start with http\\:// or https\\://. The name can contain letters, digits, underscores (_), and hyphens (-).
+   * The name of the HPC cluster. The name must be 2 to 128 characters in length. It must start with a letter or a Chinese character and cannot start with http:// or https://. It can contain digits, underscores (_), or hyphens (-).
    * 
-   * This parameter is empty by default.
+   * Default value: empty.
    * 
    * @example
    * testName
@@ -45,7 +45,7 @@ export class ModifyHpcClusterAttributeRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 

package/src/models/ModifyImageShareGroupPermissionRequest.ts

@@ -7,8 +7,6 @@ export class ModifyImageShareGroupPermissionRequest extends $dara.Model {
   removeGroup?: string[];
   /**
    * @remarks
-   * The ID of the custom image.
-   * 
    * This parameter is required.
    */
   imageId?: string;
@@ -16,8 +14,6 @@ export class ModifyImageShareGroupPermissionRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The ID of the region. You can call the `DescribeRegions` operation to query the latest region list.
-   * 
    * This parameter is required.
    */
   regionId?: string;

package/src/models/ModifyImageShareGroupPermissionResponseBody.ts

@@ -3,10 +3,6 @@ import * as $dara from '@darabonba/typescript';
 
 
 export class ModifyImageShareGroupPermissionResponseBody extends $dara.Model {
-  /**
-   * @remarks
-   * The ID of the request.
-   */
   requestId?: string;
   static names(): { [key: string]: string } {
     return {