@alicloud/ecs20140526 7.8.4 → 7.8.6

package/src/models/AcceptInquiredSystemEventRequest.ts

@@ -4,12 +4,17 @@ import * as $dara from '@darabonba/typescript';
 
 export class AcceptInquiredSystemEventRequest extends $dara.Model {
   /**
+   * @remarks
+   * > This parameter is in invitational preview and is not supported for use.
+   * 
    * @example
    * hide
    */
   choice?: string;
   /**
    * @remarks
+   * The ID of the system event.
+   * 
    * This parameter is required.
    * 
    * @example
@@ -20,6 +25,8 @@ export class AcceptInquiredSystemEventRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
+   * The region ID where the system event is located. You can invoke [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to view the latest list of Alibaba Cloud regions.
+   * 
    * This parameter is required.
    * 
    * @example

package/src/models/AcceptInquiredSystemEventResponseBody.ts

@@ -4,6 +4,9 @@ import * as $dara from '@darabonba/typescript';
 
 export class AcceptInquiredSystemEventResponseBody extends $dara.Model {
   /**
+   * @remarks
+   * The request ID.
+   * 
    * @example
    * 4DD56CA6-6D75-4D33-BE34-E4A44EBE1C3D
    */

package/src/models/AddTagsRequest.ts

@@ -7,7 +7,7 @@ import * as $dara from '@darabonba/typescript';
 export class AddTagsRequestTag extends $dara.Model {
   /**
    * @remarks
-   * The key of tag N of the resource. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot start with acs: or aliyun. It cannot contain [http:// or https://](http://https://).
+   * The tag key of the resource. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length and cannot start with aliyun or acs:. The tag key cannot contain http:// or https://.
    * 
    * @example
    * TestKey
@@ -15,7 +15,7 @@ export class AddTagsRequestTag extends $dara.Model {
   key?: string;
   /**
    * @remarks
-   * The value of tag N of the resource. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot start with acs: or aliyun. It cannot contain [http:// or https://](http://https://).
+   * The tag value of the resource. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot start with aliyun or acs:. The tag value cannot contain http:// or https://.
    * 
    * @example
    * TestValue
@@ -48,7 +48,7 @@ export class AddTagsRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID of the resource. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the resource. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 
@@ -58,7 +58,7 @@ export class AddTagsRequest extends $dara.Model {
   regionId?: string;
   /**
    * @remarks
-   * The ID of the resource. When the resources are instances, this parameter can be interpreted as InstanceId.
+   * The ID of the resource to which you want to add tags. For example, when ResourceType is set to instance, ResourceId is the instance ID.
    * 
    * This parameter is required.
    * 
@@ -72,20 +72,20 @@ export class AddTagsRequest extends $dara.Model {
    * @remarks
    * The type of the resource. Valid values:
    * 
-   * *   instance: ECS instance
-   * *   disk: disk
-   * *   snapshot: snapshot
-   * *   image: image
-   * *   securitygroup: security group
-   * *   volume: storage volume
-   * *   eni: elastic network interface (ENI)
-   * *   ddh: dedicated host
-   * *   keypair: SSH key pair
-   * *   launchtemplate: launch template
-   * *   reservedinstance: reserved instance
-   * *   snapshotpolicy: automatic snapshot policy
+   * - instance: ECS instance
+   * - disk: cloud disk
+   * - snapshot: snapshot
+   * - image: image
+   * - securitygroup: security group
+   * - volume: storage volume
+   * - eni: Elastic Network Interface (ENI)
+   * - ddh: dedicated host
+   * - keypair: SSH key pair
+   * - launchtemplate: launch template
+   * - reservedinstance: reserved instance
+   * - snapshotpolicy: automatic snapshot policy
    * 
-   * All values must be lowercase.
+   * All valid values are in lowercase.
    * 
    * This parameter is required.
    * 

package/src/models/AddTagsResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class AddTagsResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E

package/src/models/AllocateDedicatedHostsRequest.ts

@@ -92,13 +92,13 @@ export class AllocateDedicatedHostsRequest extends $dara.Model {
    * @remarks
    * The policy for migrating the instances deployed on the dedicated host when the dedicated host fails or needs to be repaired online. Valid values:
    * 
-   * *   Migrate: The instances are migrated to another physical machine and then restarted.
+   * - Migrate: The instances are migrated to another physical machine and then restarted.
    * 
-   *     If cloud disks are attached to the dedicated host, the default value is Migrate.
+   *   If cloud disks are attached to the dedicated host, the default value is Migrate.
    * 
-   * *   Stop: The instances are stopped. If the dedicated host cannot be repaired, the instances are migrated to another physical machine and then restarted.
+   * - Stop: The instances are stopped. If the dedicated host cannot be repaired, the instances are migrated to another physical machine and then restarted.
    * 
-   *     If local disks are attached to the dedicated host, the default value is Stop.
+   *   If local disks are attached to the dedicated host, the default value is Stop.
    * 
    * @example
    * Migrate
@@ -108,8 +108,9 @@ export class AllocateDedicatedHostsRequest extends $dara.Model {
    * @remarks
    * Specifies whether to add the dedicated host to the resource pool for automatic deployment. If you create an ECS instance on a dedicated host without specifying the **DedicatedHostId** parameter, Alibaba Cloud selects a dedicated host from the resource pool to host the instance. For more information, see [Automatic deployment](https://help.aliyun.com/document_detail/118938.html). Valid values:
    * 
-   * *   on: adds the dedicated host to the resource pool for automatic deployment.
-   * *   off: does not add the dedicated host to the resource pool for automatic deployment.
+   * - on: adds the dedicated host to the resource pool for automatic deployment.
+   * 
+   * - off: does not add the dedicated host to the resource pool for automatic deployment.
    * 
    * Default value: on.
    * 
@@ -123,13 +124,13 @@ export class AllocateDedicatedHostsRequest extends $dara.Model {
    * @remarks
    * The time when to automatically release the dedicated host. Specify the time in the `ISO 8601` standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC.
    * 
-   * > 
+   * >
    * 
-   * *   It must be at least half an hour later than the current time.
+   * - It must be at least half an hour later than the current time.
    * 
-   * *   It must be at most three years later than the current time.
+   * - It must be at most three years later than the current time.
    * 
-   * *   If the value of seconds (ss) is not 00, it is automatically set to 00.
+   * - If the value of seconds (ss) is not 00, it is automatically set to 00.
    * 
    * @example
    * 2019-08-21T12:30:24Z
@@ -161,8 +162,9 @@ export class AllocateDedicatedHostsRequest extends $dara.Model {
    * @remarks
    * The billing method of the dedicated host. Valid values:
    * 
-   * *   PrePaid: subscription. If you set this parameter to PrePaid, make sure that you have sufficient account balance or credits. Otherwise, `InvalidPayMethod` is returned.
-   * *   PostPaid: pay-as-you-go.
+   * - PrePaid: subscription. If you set this parameter to PrePaid, make sure that you have sufficient account balance or credits. Otherwise, `InvalidPayMethod` is returned.
+   * 
+   * - PostPaid: pay-as-you-go.
    * 
    * Default value: PostPaid.
    * 
@@ -238,8 +240,9 @@ export class AllocateDedicatedHostsRequest extends $dara.Model {
    * @remarks
    * The subscription duration of the dedicated host. The `Period` parameter is required and takes effect only when the `ChargeType` parameter is set to `PrePaid`. Valid values:
    * 
-   * *   Valid values when the PeriodUnit parameter is set to Month: 1, 2, 3, 4, 5, 6, 7, 8, 9, 12, 24, 36, 48, and 60.
-   * *   Valid values when the PeriodUnit parameter is set to Year: 1, 2, 3, 4, and 5.
+   * - Valid values when the PeriodUnit parameter is set to Month: 1, 2, 3, 4, 5, 6, 7, 8, 9, 12, 24, 36, 48, and 60.
+   * 
+   * - Valid values when the PeriodUnit parameter is set to Year: 1, 2, 3, 4, and 5.
    * 
    * @example
    * 6
@@ -249,8 +252,9 @@ export class AllocateDedicatedHostsRequest extends $dara.Model {
    * @remarks
    * The unit of the subscription duration of the dedicated host. Valid values:
    * 
-   * *   Month
-   * *   Year
+   * - Month
+   * 
+   * - Year
    * 
    * Default value: Month.
    * 

package/src/models/AllocateDedicatedHostsResponseBody.ts

@@ -34,7 +34,7 @@ export class AllocateDedicatedHostsResponseBody extends $dara.Model {
    * @remarks
    * The ID of the order.
    * 
-   * >  This parameter has a return value only when the dedicated host is a subscription one (request parameter **ChargeType set to PrePaid**).
+   * > This parameter has a return value only when the dedicated host is a subscription one (request parameter **ChargeType set to PrePaid**).
    * 
    * @example
    * 23841229****

package/src/models/AllocatePublicIpAddressRequest.ts

@@ -17,7 +17,7 @@ export class AllocatePublicIpAddressRequest extends $dara.Model {
    * @remarks
    * The static public IP address that you want to assign to the instance. This parameter is empty by default, which indicates that a static public IP address is randomly assigned by the system.
    * 
-   * >  Only users in the whitelist can specify this parameter.
+   * > Only users in the whitelist can specify this parameter.
    * 
    * @example
    * ``112.124.**.**``

package/src/models/ApplyAutoSnapshotPolicyRequest.ts

@@ -18,7 +18,7 @@ export class ApplyAutoSnapshotPolicyRequest extends $dara.Model {
   autoSnapshotPolicyId?: string;
   /**
    * @remarks
-   * The IDs of disks. The value is a JSON array that consists of disk IDs. Separate the disk IDs with commas (,).
+   * A JSON array of one or more disk IDs.
    * 
    * This parameter is required.
    * 
@@ -28,7 +28,7 @@ export class ApplyAutoSnapshotPolicyRequest extends $dara.Model {
   diskIds?: string;
   /**
    * @remarks
-   * The region ID of the automatic snapshot policy and the disks. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The ID of the region where the automatic snapshot policy and target disks are located. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to get the latest list of Alibaba Cloud regions.
    * 
    * This parameter is required.
    * 

package/src/models/ApplyAutoSnapshotPolicyResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ApplyAutoSnapshotPolicyResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The request ID.
+   * The ID of the request.
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E

package/src/models/AssignIpv6addressesRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class AssignIpv6AddressesRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters and cannot exceed 64 characters in length.**** For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -13,11 +13,11 @@ export class AssignIpv6AddressesRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * The IPv6 addresses to assign to the ENI. Valid values of N: 1 to 10.
+   * One or more IPv6 addresses to assign to the ENI. You can set up to 10 IPv6 addresses. Valid values of N: 1 to 10.
    * 
    * Example: Ipv6Address.1=2001:db8:1234:1a00::\\*\\*\\*\\*
    * 
-   * >  You must specify `Ipv6Addresses.N` or `Ipv6AddressCount`, but not both.
+   * > When you invoke this operation, you must set either the `Ipv6Addresses.N` parameter or the `Ipv6AddressCount` parameter, but not both.
    * 
    * @example
    * 2001:db8:1234:1a00::****
@@ -27,7 +27,7 @@ export class AssignIpv6AddressesRequest extends $dara.Model {
    * @remarks
    * The number of IPv6 addresses to randomly generate for the ENI. Valid values: 1 to 10.
    * 
-   * >  You must specify `Ipv6Addresses.N` or `Ipv6AddressCount`, but not both.
+   * > When you invoke this operation, you must set either the `Ipv6Addresses.N` parameter or the `Ipv6AddressCount` parameter, but not both.
    * 
    * @example
    * 1
@@ -35,24 +35,22 @@ export class AssignIpv6AddressesRequest extends $dara.Model {
   ipv6AddressCount?: number;
   /**
    * @remarks
-   * The IPv6 prefixes to assign to the ENI. Valid values of N: 1 to 10.
-   * 
-   * >  To assign IPv6 prefixes to the ENI, you must specify Ipv6Prefix.N or Ipv6PrefixCount, but not both.
+   * One or more IPv6 prefixes to assign to the ENI. Valid values of N: 1 to 10.
+   * > To set IPv6 prefixes for the ENI, you must set either the Ipv6Prefix.N parameter or the Ipv6PrefixCount parameter, but not both.
    */
   ipv6Prefix?: string[];
   /**
    * @remarks
    * The number of IPv6 prefixes to assign to the ENI. Valid values: 1 to 10.
-   * 
-   * >  To assign IPv6 prefixes to the ENI, you must specify Ipv6Prefix.N or Ipv6PrefixCount, but not both.
+   * > To set IPv6 prefixes for the ENI, you must set either the Ipv6Prefix.N parameter or the Ipv6PrefixCount parameter, but not both.
    * 
    * @example
-   * hide
+   * 1
    */
   ipv6PrefixCount?: number;
   /**
    * @remarks
-   * The ENI ID.
+   * The ID of the ENI.
    * 
    * This parameter is required.
    * 
@@ -64,7 +62,7 @@ export class AssignIpv6AddressesRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID of the ENI. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the ENI. You can invoke [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 

package/src/models/AssignIpv6addressesResponseBody.ts

@@ -59,7 +59,7 @@ export class AssignIpv6AddressesResponseBody extends $dara.Model {
   ipv6Sets?: AssignIpv6AddressesResponseBodyIpv6Sets;
   /**
    * @remarks
-   * The ENI ID.
+   * The ID of the ENI.
    * 
    * @example
    * eni-bp1iqejowblx6h8j****

package/src/models/AssignPrivateIpAddressesRequest.ts

@@ -15,17 +15,17 @@ export class AssignPrivateIpAddressesRequest extends $dara.Model {
    * @remarks
    * The IPv4 prefixes to assign to the ENI. Valid values of N: 1 to 10.
    * 
-   * >  To assign IPv4 prefixes to the ENI, you must specify the Ipv4Prefix.N or Ipv4PrefixCount parameter, but not both.
+   * > To assign IPv4 prefixes to the ENI, you must specify the Ipv4Prefix.N or Ipv4PrefixCount parameter, but not both.
    */
   ipv4Prefix?: string[];
   /**
    * @remarks
    * The number of IPv4 prefixes to be randomly generated for the ENI. Valid values: 1 to 10.
    * 
-   * >  To assign IPv4 prefixes to the ENI, you must specify the Ipv4Prefix.N or Ipv4PrefixCount parameter, but not both.
+   * > To assign IPv4 prefixes to the ENI, you must specify the Ipv4Prefix.N or Ipv4PrefixCount parameter, but not both.
    * 
    * @example
-   * hide
+   * 1
    */
   ipv4PrefixCount?: number;
   /**
@@ -44,8 +44,9 @@ export class AssignPrivateIpAddressesRequest extends $dara.Model {
    * @remarks
    * Secondary private IP address N to be automatically assigned from the CIDR block of the vSwitch that is connected to the ENI. Valid values of N:
    * 
-   * *   When the ENI is in the Available (`Available`) state, the valid values of N are 1 to 50.
-   * *   When the ENI is in the InUse (`InUse`) state, the valid values of N are subject to the instance type. For more information, see [Overview of instance families](https://help.aliyun.com/document_detail/25378.html).
+   * - When the ENI is in the Available (`Available`) state, the valid values of N are 1 to 50.
+   * 
+   * - When the ENI is in the InUse (`InUse`) state, the valid values of N are subject to the instance type. For more information, see [Overview of instance families](https://help.aliyun.com/document_detail/25378.html).
    * 
    * To assign secondary private IP addresses to the ENI, you must specify `PrivateIpAddress.N` or `SecondaryPrivateIpAddressCount` but not both.
    * 

package/src/models/AttachDiskRequest.ts

@@ -7,12 +7,13 @@ export class AttachDiskRequest extends $dara.Model {
    * @remarks
    * Specifies whether to attach the disk as the system disk. Valid values:
    * 
-   * *   true: attaches the disk as the system disk.
-   * *   false: does not attach the disk as the system disk.
+   * - true: attaches the disk as the system disk.
+   * 
+   * - false: does not attach the disk as the system disk.
    * 
    * Default value: false.
    * 
-   * >  You can set `Bootable` to true only if the instance does not have a system disk.
+   * > You can set `Bootable` to true only if the instance does not have a system disk.
    * 
    * @example
    * false
@@ -22,16 +23,19 @@ export class AttachDiskRequest extends $dara.Model {
    * @remarks
    * Specifies whether to release the disk when the instance is released. Valid values:
    * 
-   * *   true: releases the disk when the instance is released.
-   * *   false: does not release the disk when the instance is released. The disk is retained as a pay-as-you-go data disk.
+   * - true: releases the disk when the instance is released.
+   * 
+   * - false: does not release the disk when the instance is released. The disk is retained as a pay-as-you-go data disk.
    * 
    * Default value: false.
    * 
    * When you specify this parameter, take note of the following items:
    * 
-   * *   If `OperationLocks` in the DescribeInstances response contains `"LockReason" : "security"` for the instance to which the disk is attached, the instance is locked for security reasons. Regardless of whether you set `DeleteWithInstance` to `false`, the DeleteWithInstance setting is ignored, and the disk is released when the instance is released.
-   * *   If you want to attach an `elastic ephemeral disk`, you must set `DeleteWithInstance` to `true`.
-   * *   You cannot specify DeleteWithInstance for disks for which the multi-attach feature is enabled.
+   * - If `OperationLocks` in the DescribeInstances response contains `"LockReason" : "security"` for the instance to which the disk is attached, the instance is locked for security reasons. Regardless of whether you set `DeleteWithInstance` to `false`, the DeleteWithInstance setting is ignored, and the disk is released when the instance is released.
+   * 
+   * - If you want to attach an `elastic ephemeral disk`, you must set `DeleteWithInstance` to `true`.
+   * 
+   * - You cannot specify DeleteWithInstance for disks for which the multi-attach feature is enabled.
    * 
    * @example
    * false
@@ -41,7 +45,7 @@ export class AttachDiskRequest extends $dara.Model {
    * @remarks
    * The device name of the disk.
    * 
-   * >  This parameter will be removed in the future. We recommend that you use other parameters to ensure future compatibility.
+   * > This parameter will be removed in the future. We recommend that you use other parameters to ensure future compatibility.
    * 
    * @example
    * testDeviceName
@@ -51,7 +55,7 @@ export class AttachDiskRequest extends $dara.Model {
    * @remarks
    * The ID of the disk. The disk specified by `DiskId` and the instance specified by `InstanceId` must reside in the same zone.
    * 
-   * >  For information about the limits on attaching a data disk and a system disk, see the "Usage notes" section of this topic.
+   * > For information about the limits on attaching a data disk and a system disk, see the "Usage notes" section of this topic.
    * 
    * This parameter is required.
    * 
@@ -63,12 +67,13 @@ export class AttachDiskRequest extends $dara.Model {
    * @remarks
    * Specifies whether to force attach the disk to the instance. Valid values:
    * 
-   * *   true: force attaches the disk to the instance.
-   * *   false: does not force attach the disk to the instance.
+   * - true: force attaches the disk to the instance.
+   * 
+   * - false: does not force attach the disk to the instance.
    * 
    * Default value: false.
    * 
-   * >  You can set this parameter to true only for Regional Enterprise SSDs (ESSDs) (cloud_regional_disk_auto).
+   * > You can set this parameter to true only for Regional Enterprise SSDs (ESSDs) (cloud_regional_disk_auto).
    * 
    * @example
    * false
@@ -88,8 +93,9 @@ export class AttachDiskRequest extends $dara.Model {
    * @remarks
    * The name of the SSH key pair that you bind to the Linux instance when you attach the system disk.
    * 
-   * *   Windows instances do not support logons based on SSH key pairs. The `Password` parameter takes effect even if the KeyPairName parameter is specified.
-   * *   For Linux instances, the username and password-based logon method is disabled by default.
+   * - Windows instances do not support logons based on SSH key pairs. The `Password` parameter takes effect even if the KeyPairName parameter is specified.
+   * 
+   * - For Linux instances, the username and password-based logon method is disabled by default.
    * 
    * @example
    * KeyPairTestName
@@ -101,7 +107,9 @@ export class AttachDiskRequest extends $dara.Model {
    * @remarks
    * The password that is set when you attach the system disk. The password is applicable only to the administrator and root users. The password must be 8 to 30 characters in length and must contain at least three of the following character types: uppercase letters, lowercase letters, digits, and special characters. The following special characters are supported:
    * 
-   *     ()`~!@#$%^&*-_+=|{}[]:;\\"<>,.?/
+   * ```
+   * ()`~!@#$%^&*-_+=|{}[]:;\\"<>,.?/
+   * ```
    * 
    * For Windows instances, passwords cannot start with a forward slash (/).
    * 

package/src/models/AttachInstanceRamRoleRequest.ts

@@ -10,7 +10,7 @@ export class AttachInstanceRamRoleRequest extends $dara.Model {
    * This parameter is required.
    * 
    * @example
-   * [“i-bp14ss25xca5ex1u****”, “i-bp154z5o1qjalfse****”, “i-bp10ws62o04ubhvi****”…]
+   * ["i-bp14ss25xca5ex1u****","i-bp154z5o1qjalfse****", "i-bp10ws62o04ubhvi****"]
    */
   instanceIds?: string;
   ownerId?: number;

package/src/models/AttachKeyPairRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class AttachKeyPairRequest extends $dara.Model {
   /**
    * @remarks
-   * The IDs of instances to which you want to bind the SSH key pair. The value can be a JSON array that consists of up to 50 instance IDs. Separate multiple instance IDs with commas (,).
+   * The IDs of the instances to which you want to bind the SSH key pair. The value can be a JSON array that consists of up to 50 instance IDs. Separate multiple IDs with commas (,).
    * 
    * This parameter is required.
    * 
@@ -26,7 +26,7 @@ export class AttachKeyPairRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID of the SSH key pair. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the SSH key pair. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list of Alibaba Cloud.
    * 
    * This parameter is required.
    * 

package/src/models/AttachKeyPairResponseBody.ts

@@ -63,7 +63,7 @@ export class AttachKeyPairResponseBodyResults extends $dara.Model {
 export class AttachKeyPairResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The number of instances to which the SSH key pair fails to be bound.
+   * The number of instances to which the key pair failed to be bound.
    * 
    * @example
    * 0
@@ -71,7 +71,7 @@ export class AttachKeyPairResponseBody extends $dara.Model {
   failCount?: string;
   /**
    * @remarks
-   * The name of the SSH key pair.
+   * The name of the key pair.
    * 
    * @example
    * testKeyPairName
@@ -88,7 +88,7 @@ export class AttachKeyPairResponseBody extends $dara.Model {
   results?: AttachKeyPairResponseBodyResults;
   /**
    * @remarks
-   * The total number of instances to which the SSH key pair is bound.
+   * The total number of instances to which the key pair is bound.
    * 
    * @example
    * 2