@alicloud/ecs20140526 7.8.4 → 7.8.6

package/src/models/ResetDisksRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ResetDisksRequestDisk extends $dara.Model {
   /**
    * @remarks
-   * The ID of the disk that you want to roll back. You can specify up to 10 disk IDs.
+   * The ID of the disk to roll back.
    * 
    * @example
    * d-j6cf7l0ewidb78lq****
@@ -13,7 +13,7 @@ export class ResetDisksRequestDisk extends $dara.Model {
   diskId?: string;
   /**
    * @remarks
-   * The ID of the disk snapshot that is contained in the instance snapshot. You can specify up to 10 disk snapshot IDs.
+   * The ID of the snapshot from an instance snapshot that is used to roll back the disk.
    * 
    * @example
    * s-j6cdofbycydvg7ey****
@@ -45,17 +45,18 @@ export class ResetDisksRequestDisk extends $dara.Model {
 export class ResetDisksRequest extends $dara.Model {
   /**
    * @remarks
-   * The disks that you want to roll back.
+   * The disks to roll back. You can specify up to 10 disks.
    * 
    * This parameter is required.
    */
   disk?: ResetDisksRequestDisk[];
   /**
    * @remarks
-   * Specifies whether to perform only a dry run, without performing the actual request. Valid values:
+   * Specifies whether to perform a dry run. Valid values:
    * 
-   * *   true: performs only a dry run. The system checks the request for potential issues, including missing parameter values, incorrect request syntax, and resource state limits. If the request fails the dry run, an error code is returned. If the request passes the dry run, the `DryRunOperation` error code is returned.
-   * *   false: performs a dry run and performs the actual request. If the request passes the dry run, the rollback operation is performed.
+   * - true: performs a dry run to check the request. The disks are not rolled back. The check verifies required parameters, the request format, and resource states. If the request fails the check, the operation returns an error message. If the request passes the check, the operation returns the `DryRunOperation` error code.
+   * 
+   * - false: sends a normal request. After the request passes the check, the operation rolls back the disks.
    * 
    * Default value: false.
    * 
@@ -67,7 +68,7 @@ export class ResetDisksRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the latest Alibaba Cloud regions.
    * 
    * This parameter is required.
    * 

package/src/models/ResetDisksResponseBody.ts

@@ -119,7 +119,7 @@ export class ResetDisksResponseBody extends $dara.Model {
   operationProgressSet?: ResetDisksResponseBodyOperationProgressSet;
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 3D66C85C-AA97-4A00-B0ED-2D9A80FE782C

package/src/models/ResizeDiskRequest.ts

@@ -7,43 +7,49 @@ export class ResizeDiskRequest extends $dara.Model {
    * @remarks
    * The new disk capacity. Unit: GiB. Valid values:
    * 
-   * *   For a system disk:
+   * - For a system disk:
    * 
-   *     *   Basic disk (cloud): 20 to 500.
+   *   - Basic disk (cloud): 20 to 500.
    * 
-   *     *   ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.
+   *   - ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.
    * 
-   *         *   PL0 ESSD: 1 to 2048.
-   *         *   PL1 ESSD: 20 to 2048.
-   *         *   PL2 ESSD: 461 to 2048.
-   *         *   PL3 ESSD: 1261 to 2048.
+   *     - PL0 ESSD: 1 to 2048.
    * 
-   *     *   ESSD AutoPL disk: 1 to 2048.
+   *     - PL1 ESSD: 20 to 2048.
    * 
-   *     *   Other disk categories: 20 to 2048.
+   *     - PL2 ESSD: 461 to 2048.
    * 
-   * *   For a data disk:
+   *     - PL3 ESSD: 1261 to 2048.
    * 
-   *     *   Ultra disk (cloud_efficiency): 20 to 32768.
+   *   - ESSD AutoPL disk: 1 to 2048.
    * 
-   *     *   Standard SSD (cloud_ssd): 20 to 32768.
+   *   - Other disk categories: 20 to 2048.
    * 
-   *     *   ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.`` To query the performance level of an ESSD, call the [DescribeDisks](https://help.aliyun.com/document_detail/25514.html) operation to query disk information and check the `PerformanceLevel` value in the response.
+   * - For a data disk:
    * 
-   *         *   PL0 ESSD: 1 to 65536.
-   *         *   PL1 ESSD: 20 to 65536.
-   *         *   PL2 ESSD: 461 to 65536.
-   *         *   PL3 ESSD: 1261 to 65536.
+   *   - Ultra disk (cloud_efficiency): 20 to 32768.
    * 
-   *     *   Basic disk (cloud): 5 to 2000.
+   *   - Standard SSD (cloud_ssd): 20 to 32768.
    * 
-   *     *   ESSD AutoPL disk (cloud_auto): 1 to 65536.
+   *   - ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.\\`\\` To query the performance level of an ESSD, call the [DescribeDisks](https://help.aliyun.com/document_detail/25514.html) operation to query disk information and check the `PerformanceLevel` value in the response.
    * 
-   *     *   Standard elastic ephemeral disk (elastic_ephemeral_disk_standard): 64 to 8192.
+   *     - PL0 ESSD: 1 to 65536.
    * 
-   *     *   Premium elastic ephemeral disk (elastic_ephemeral_disk_premium): 64 to 8192.
+   *     - PL1 ESSD: 20 to 65536.
    * 
-   * >  The new disk capacity must be larger than the original disk capacity. Otherwise, an error is reported.
+   *     - PL2 ESSD: 461 to 65536.
+   * 
+   *     - PL3 ESSD: 1261 to 65536.
+   * 
+   *   - Basic disk (cloud): 5 to 2000.
+   * 
+   *   - ESSD AutoPL disk (cloud_auto): 1 to 65536.
+   * 
+   *   - Standard elastic ephemeral disk (elastic_ephemeral_disk_standard): 64 to 8192.
+   * 
+   *   - Premium elastic ephemeral disk (elastic_ephemeral_disk_premium): 64 to 8192.
+   * 
+   * > The new disk capacity must be larger than the original disk capacity. Otherwise, an error is reported.
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -63,43 +69,49 @@ export class ResizeDiskRequest extends $dara.Model {
    * @remarks
    * The new disk capacity. Unit: GiB. Valid values:
    * 
-   * *   System disk:
+   * - System disk:
+   * 
+   *   - Basic disk (cloud): 20 to 500.
    * 
-   *     *   Basic disk (cloud): 20 to 500.
+   *   - ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.
    * 
-   *     *   ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.
+   *     - Valid values when SystemDisk.PerformanceLevel is set to PL0: 1 to 2048.
    * 
-   *         *   Valid values when SystemDisk.PerformanceLevel is set to PL0: 1 to 2048.
-   *         *   Valid values when SystemDisk.PerformanceLevel is set to PL1: 20 to 2048.
-   *         *   Valid values when SystemDisk.PerformanceLevel is set to PL2: 461 to 2048.
-   *         *   Valid values when SystemDisk.PerformanceLevel is set to PL3: 1261 to 2048.
+   *     - Valid values when SystemDisk.PerformanceLevel is set to PL1: 20 to 2048.
    * 
-   *     *   ESSD AutoPL disk: 1 to 2048.
+   *     - Valid values when SystemDisk.PerformanceLevel is set to PL2: 461 to 2048.
    * 
-   *     *   Other disk categories: 20 to 2048.
+   *     - Valid values when SystemDisk.PerformanceLevel is set to PL3: 1261 to 2048.
    * 
-   * *   Data disk:
+   *   - ESSD AutoPL disk: 1 to 2048.
    * 
-   *     *   Ultra disk (cloud_efficiency): 20 to 32768.
+   *   - Other disk categories: 20 to 2048.
    * 
-   *     *   Standard SSD (cloud_ssd): 20 to 32768.
+   * - Data disk:
    * 
-   *     *   ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.`` To query the performance level of an ESSD, call the [DescribeDisks](https://help.aliyun.com/document_detail/25514.html) operation to query disk information and check the `PerformanceLevel` value in the response.
+   *   - Ultra disk (cloud_efficiency): 20 to 32768.
    * 
-   *         *   PL0 ESSD: 1 to 65536.
-   *         *   PL1 ESSD: 20 to 65536.
-   *         *   PL2 ESSD: 461 to 65536.
-   *         *   PL3 ESSD: 1261 to 65536.
+   *   - Standard SSD (cloud_ssd): 20 to 32768.
    * 
-   *     *   Basic disk (cloud): 5 to 2000.
+   *   - ESSD (cloud_essd): The valid values vary based on the performance level of the ESSD.\\`\\` To query the performance level of an ESSD, call the [DescribeDisks](https://help.aliyun.com/document_detail/25514.html) operation to query disk information and check the `PerformanceLevel` value in the response.
    * 
-   *     *   ESSD AutoPL disk (cloud_auto): 1 to 65536.
+   *     - PL0 ESSD: 1 to 65536.
    * 
-   *     *   Standard elastic ephemeral disk (elastic_ephemeral_disk_standard): 64 to 8192.
+   *     - PL1 ESSD: 20 to 65536.
    * 
-   *     *   Premium elastic ephemeral disk (elastic_ephemeral_disk_premium): 64 to 8192.
+   *     - PL2 ESSD: 461 to 65536.
    * 
-   * >  The new disk capacity must be larger than the original disk capacity. Otherwise, an error is reported.
+   *     - PL3 ESSD: 1261 to 65536.
+   * 
+   *   - Basic disk (cloud): 5 to 2000.
+   * 
+   *   - ESSD AutoPL disk (cloud_auto): 1 to 65536.
+   * 
+   *   - Standard elastic ephemeral disk (elastic_ephemeral_disk_standard): 64 to 8192.
+   * 
+   *   - Premium elastic ephemeral disk (elastic_ephemeral_disk_premium): 64 to 8192.
+   * 
+   * > The new disk capacity must be larger than the original disk capacity. Otherwise, an error is reported.
    * 
    * This parameter is required.
    * 
@@ -115,8 +127,9 @@ export class ResizeDiskRequest extends $dara.Model {
    * @remarks
    * The method that you want to use to resize the disk. Valid values:
    * 
-   * *   offline (default): resizes the disk offline. After resizing a disk offline, you must [restart the instance](https://help.aliyun.com/document_detail/25440.html) in the console or call an API operation [RebootInstance](https://help.aliyun.com/document_detail/25502.html) make the operation take effect.
-   * *   online: resizes the disk online without the need to restart the instance. You can resize ultra disks, standard SSDs, ESSDs, and elastic ephemeral disks online.
+   * - offline (default): resizes the disk offline. After resizing a disk offline, you must [restart the instance](https://help.aliyun.com/document_detail/25440.html) in the console or call an API operation [RebootInstance](https://help.aliyun.com/document_detail/25502.html) make the operation take effect.
+   * 
+   * - online: resizes the disk online without the need to restart the instance. You can resize ultra disks, standard SSDs, ESSDs, and elastic ephemeral disks online.
    * 
    * @example
    * offline

package/src/models/RevokeSecurityGroupEgressRequest.ts

@@ -13,7 +13,7 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * The destination IPv4 CIDR block of the security group rule. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The destination IPv4 Classless Inter-Domain Routing (CIDR) block for which you want to revoke access permissions. CIDR format and IPv4 address range are supported.
    * 
    * @example
    * 10.0.0.0/8
@@ -21,16 +21,16 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * The ID of the destination security group of the security group rule.
+   * The ID of the destination security group for which you want to revoke access permissions.
    * 
-   * *   You must specify at least one of the following parameters: `DestGroupId`, `DestCidrIp`, `Ipv6DestCidrIp`, and `DestPrefixListId`.
-   * *   If you specify `DestGroupId` but do not specify `DestCidrIp`, you must set `NicType` to intranet.
-   * *   If you specify both `DestGroupId` and `DestCidrIp`, `DestCidrIp` takes precedence.
+   * - Specify at least one of `DestGroupId`, `DestCidrIp`, `Ipv6DestCidrIp`, or `DestPrefixListId`.
+   * - If you specify `DestGroupId` but do not specify `DestCidrIp`, the `NicType` parameter can only be set to intranet.
+   * - If you specify both `DestGroupId` and `DestCidrIp`, `DestCidrIp` takes precedence.
    * 
-   * Take note of the following items:
+   * Note:
    * 
-   * *   Advanced security groups do not support security group rules that reference security groups as authorization objects.
-   * *   Each basic security group can contain up to 20 security group rules that reference security groups as authorization objects.
+   * - Advanced security groups do not support authorization for other security groups.
+   * - A maximum of 20 security groups can be authorized for a basic security group.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -38,10 +38,10 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destGroupId?: string;
   /**
    * @remarks
-   * The Alibaba Cloud account that manages the destination security group specified in the security group rule.
+   * The Alibaba Cloud account that manages the destination security group when you revoke a cross-account authorization security group rule.
    * 
-   * *   If you leave `DestGroupOwnerAccount` and `DestGroupOwnerId` empty, access control configurations are removed from another security group managed by your Alibaba Cloud account.
-   * *   If you specify `DestCidrIp`, `DestGroupOwnerAccount` is invalid.
+   * - If neither `DestGroupOwnerAccount` nor `DestGroupOwnerId` is configured in Settings, the rule is considered to revoke access permissions for another security group within your account. 
+   * - If `DestCidrIp` is specified, this parameter is ignored.
    * 
    * @example
    * Test@aliyun.com
@@ -49,10 +49,10 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destGroupOwnerAccount?: string;
   /**
    * @remarks
-   * The ID of the Alibaba Cloud account that manages the destination security group specified in the security group rule.
+   * The ID of the Alibaba Cloud account that manages the destination security group when you revoke a cross-account authorization security group rule.
    * 
-   * *   If you leave `DestGroupOwnerId` and `DestGroupOwnerAccount` empty, access control configurations are removed from another security group managed by your Alibaba Cloud account.
-   * *   If you specify `DestCidrIp`, `DestGroupOwnerId` is invalid.
+   * - If neither `DestGroupOwnerId` nor `DestGroupOwnerAccount` is configured in Settings, the rule is considered to revoke access permissions for another security group within your account.  
+   * - If `DestCidrIp` is specified, this parameter is ignored.
    * 
    * @example
    * 12345678910
@@ -60,12 +60,12 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destGroupOwnerId?: string;
   /**
    * @remarks
-   * The ID of the destination prefix list of the security group rule. You can call the [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) operation to query the IDs of available prefix lists.
+   * The ID of the destination prefix list for which you want to revoke access permissions. You can invoke [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) to query available prefix list IDs.
    * 
-   * Take note of the following items:
+   * Note:
    * 
-   * *   If a security group resides in the classic network, you cannot reference prefix lists in the rules of the security group. For information about the limits on security groups and prefix lists, see the [Security group limits](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas" topic.
-   * *   If you specify `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId`, this parameter is ignored.
+   * - Prefix lists are not supported when the network type of the security group is classic network. For more information about the limits on security groups and prefix lists, see [Security group limits](~~25412#SecurityGroupQuota1~~). You cannot configure prefix lists in Settings for classic network security groups.
+   * - If you specify one of `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId`, this parameter is ignored.
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****
@@ -73,14 +73,14 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   destPrefixListId?: string;
   /**
    * @remarks
-   * The protocol type. The values of this parameter are case-insensitive. Valid values:
-   * 
-   * *   TCP.
-   * *   UDP.
-   * *   ICMP.
-   * *   ICMPv6.
-   * *   GRE.
-   * *   ALL: All protocols are supported.
+   * The protocol type. The value is case-insensitive. Valid values: 
+   *          
+   * - TCP.
+   * - UDP.
+   * - ICMP.
+   * - ICMPv6.
+   * - GRE.
+   * - ALL: all protocols.
    * 
    * @example
    * TCP
@@ -88,9 +88,9 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   ipProtocol?: string;
   /**
    * @remarks
-   * The destination IPv6 CIDR block of the security group rule. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The destination IPv6 Classless Inter-Domain Routing (CIDR) block for which you want to revoke access permissions. CIDR format and IPv6 address range are supported.
    * 
-   * >  This parameter is valid only for Elastic Compute Service (ECS) instances that reside in virtual private clouds (VPCs) and support IPv6 CIDR blocks. You cannot specify both this parameter and `DestCidrIp` in the same request.
+   * > This parameter is valid only for ECS instances that reside in VPCs and support IPv6. You cannot configure this parameter and `DestCidrIp` in Settings at the same time.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -98,11 +98,11 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * The source IPv6 CIDR block of the security group rule. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The source IPv6 CIDR block. CIDR format and IPv6 address range are supported.
    * 
    * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
-   * >  This parameter is valid only for ECS instances that reside in VPCs and support IPv6 CIDR blocks. You cannot specify both this parameter and `DestCidrIp` in the same request.
+   * > This parameter is valid only for ECS instances that reside in VPCs and support IPv6. You cannot configure this parameter and `DestCidrIp` in Settings at the same time.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -110,14 +110,14 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * The network interface controller (NIC) type of the security group rule if the security group resides in the classic network. Valid values:
+   * The network interface controller (NIC) type of the security group rule when the security group is in the classic network. Valid values:
    * 
-   * *   internet: public NIC.
-   * *   intranet: internal NIC.
+   * - internet: public NIC.
+   * - intranet: internal NIC.
    * 
-   * If the security group resides in a VPC, this parameter is set to intranet by default and cannot be modified.
+   * For VPC-type security group rules, you do not need to configure the NIC type in Settings. The default value is intranet, and only intranet is supported.
    * 
-   * If you specify `DestGroupId` to delete outbound security group rules that reference the specified security group as an authorization object, you must set this parameter to intranet.
+   * When you revoke an authorization rule between security groups (when `DestGroupId` is specified), this parameter can only be set to intranet.
    * 
    * Default value: internet.
    * 
@@ -127,10 +127,10 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   nicType?: string;
   /**
    * @remarks
-   * The action of the security group rule. Valid values:
-   * 
-   * *   accept: allows access.
-   * *   drop: denies access and returns no responses. In this case, the request times out or the connection cannot be established.
+   * The access permissions. Valid values: 
+   *          
+   * - accept: Accepts access.
+   * - drop: Denies access without returning a deny response. The request timeout or the connection cannot be established.
    * 
    * Default value: accept.
    * 
@@ -140,12 +140,12 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * The destination port range of the security group rule. Valid values:
-   * 
-   * *   If you set IpProtocol to TCP or UDP, the valid values of this parameter are 1 to 65535. Specify a port range in the format of \\<Start port number>/\\<End port number>. Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port range is -1/-1.
+   * The range of destination ports that correspond to the transport layer protocol for the security group. Valid values: 
+   *          
+   * - TCP/UDP: Valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
    * @example
    * 22/22
@@ -153,10 +153,10 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * The ID of the port list. You can call the `DescribePortRangeLists` operation to query the IDs of available prefix lists.
-   * 
-   * *   If you specify `Permissions.N.PortRange`, this parameter is ignored.
-   * *   If a security group resides in the classic network, you cannot reference port lists in the rules of the security group. For information about the limits on security groups and port lists, see the [Security group limits](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas" topic.
+   * The port list ID.
+   * You can invoke `DescribePortRangeLists` to query available port list IDs.
+   * - If you specify `Permissions.N.PortRange`, this parameter is ignored.
+   * - Port lists are not supported when the network type of the security group is classic network. You cannot configure port lists in Settings for classic network security groups. For more information about the limits on security groups and port lists, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * prl-2ze9743****
@@ -164,7 +164,7 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   portRangeListId?: string;
   /**
    * @remarks
-   * The priority of the security group rule. A smaller value specifies a higher priority. Valid values: 1 to 100.
+   * The priority of the security group rule. A smaller value indicates a higher priority. Valid values: 1 to 100.
    * 
    * Default value: 1.
    * 
@@ -174,7 +174,7 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The source IPv4 CIDR block of the security group rule. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The source IPv4 CIDR block. CIDR format and IPv4 address range are supported.
    * 
    * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
@@ -184,12 +184,12 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * The source port range of the security group rule. Valid values:
-   * 
-   * *   If you set IpProtocol to TCP or UDP, the valid values of this parameter are 1 to 65535. Specify a port range in the format of \\<Start port number>/\\<End port number>. Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port range is -1/-1.
+   * The range of source ports that correspond to the transport layer protocol for the security group. Valid values:
+   *          
+   * - TCP/UDP: Valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
    * This parameter is used to support quintuple rules. For more information, see [Security group quintuple rules](https://help.aliyun.com/document_detail/97439.html).
    * 
@@ -251,7 +251,7 @@ export class RevokeSecurityGroupEgressRequestPermissions extends $dara.Model {
 export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **token** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * A client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
@@ -259,7 +259,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Description` to specify the rule description.
+   * Deprecated. Use `Permissions.N.Description` to specify the rule description.
    * 
    * @example
    * This is description.
@@ -269,7 +269,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestCidrIp` to specify the destination IPv4 CIDR block.
+   * Deprecated. Use `Permissions.N.DestCidrIp` to specify the destination IPv4 Classless Inter-Domain Routing (CIDR) block.
    * 
    * @example
    * 10.0.0.0/8
@@ -279,7 +279,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestGroupId` to specify the ID of the destination security group.
+   * Deprecated. Use `Permissions.N.DestGroupId` to specify the destination security group ID.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -289,7 +289,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destGroupId?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestGroupOwnerAccount` to specify the Alibaba Cloud account that manages the destination security group.
+   * Deprecated. Use `Permissions.N.DestGroupOwnerAccount` to specify the Alibaba Cloud account that manages the destination security group.
    * 
    * @example
    * Test@aliyun.com
@@ -299,7 +299,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destGroupOwnerAccount?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestGroupOwnerId` to specify the ID of the Alibaba Cloud account that manages the destination security group.
+   * Deprecated. Use `Permissions.N.DestGroupOwnerId` to specify the ID of the Alibaba Cloud account that manages the destination security group.
    * 
    * @example
    * 12345678910
@@ -309,7 +309,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destGroupOwnerId?: number;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.DestPrefixListId` to specify the ID of the destination prefix list.
+   * Deprecated. Use `Permissions.N.DestPrefixListId` to specify the destination prefix list ID.
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****
@@ -319,7 +319,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   destPrefixListId?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.IpProtocol` to specify the protocol.
+   * Deprecated. Use `Permissions.N.IpProtocol` to specify the protocol type.
    * 
    * @example
    * TCP
@@ -329,7 +329,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ipProtocol?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Ipv6DestCidrIp` to specify the destination IPv6 CIDR block.
+   * Deprecated. Use `Permissions.N.Ipv6DestCidrIp` to specify the destination IPv6 Classless Inter-Domain Routing (CIDR) block.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -339,7 +339,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Ipv6SourceCidrIp` to specify the source IPv6 CIDR block.
+   * Deprecated. Use `Permissions.N.Ipv6SourceCidrIp` to specify the source IPv6 CIDR block.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -349,7 +349,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.NicType` to specify the network interface type.
+   * Deprecated. Use `Permissions.N.NicType` to specify the network interface type.
    * 
    * @example
    * intranet
@@ -361,12 +361,12 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The security group rules. You can specify up to 100 security group rules.
+   * The array of security group rules. Array length: 0 to 100.
    */
   permissions?: RevokeSecurityGroupEgressRequestPermissions[];
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Policy` to specify whether to allow outbound access.
+   * Deprecated. Use `Permissions.N.Policy` to configure the access permissions in Settings.
    * 
    * @example
    * accept
@@ -376,7 +376,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.PortRange` to specify the range of destination ports.
+   * Deprecated. Use `Permissions.N.PortRange` to specify the port range.
    * 
    * @example
    * 22/22
@@ -386,7 +386,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.Priority` to specify the rule priority.
+   * Deprecated. Use `Permissions.N.Priority` to specify the rule priority.
    * 
    * @example
    * 1
@@ -396,7 +396,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 
@@ -408,7 +408,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The ID of the security group.
+   * The security group ID.
    * 
    * This parameter is required.
    * 
@@ -418,12 +418,12 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   securityGroupId?: string;
   /**
    * @remarks
-   * An array of security group rule IDs. You can specify 1 to 100 security group rules.
+   * The array of security group rule IDs. Array length: 0 to 100.
    */
   securityGroupRuleId?: string[];
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourceCidrIp` to specify the source IPv4 CIDR block.
+   * Deprecated. Use `Permissions.N.SourceCidrIp` to specify the source IPv4 CIDR block.
    * 
    * @example
    * 10.0.0.0/8
@@ -433,7 +433,7 @@ export class RevokeSecurityGroupEgressRequest extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * This parameter is deprecated. Use `Permissions.N.SourcePortRange` to specify the range of source ports.
+   * Deprecated. Use `Permissions.N.SourcePortRange` to specify the source port range.
    * 
    * @example
    * 22/22

package/src/models/RevokeSecurityGroupEgressResponseBody.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class RevokeSecurityGroupEgressResponseBody extends $dara.Model {
   /**
    * @remarks
-   * The ID of the request.
+   * The request ID.
    * 
    * @example
    * 473469C7-AA6F-4DC5-B3DB-A3DC0DE3****