@alicloud/ecs20140526 7.8.4 → 7.8.6

package/src/models/ModifySecurityGroupEgressRuleRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters and cannot exceed 64 characters in length.**** For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * Ensures the idempotency of the request. The value is generated by a client and must be unique among different requests. **ClientToken** supports only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotency](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -21,9 +21,9 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * The destination IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The destination IPv4 CIDR block. CIDR format and IPv4 format are supported.
    * 
-   * By default, this parameter is left empty.
+   * Default value: none.
    * 
    * @example
    * 10.0.0.0/8
@@ -31,11 +31,11 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * The ID of the destination security group. You must specify at least one of `DestGroupId` and `DestCidrIp`.
+   * The ID of the destination security group to which you want to set access permissions. At least one of `DestGroupId` or `DestCidrIp` must be specified.
    * 
-   * *   At least one of DestGroupId, DestCidrIp, Ipv6DestCidrIp, and DestPrefixListId must be specified.
-   * *   If DestGroupId is specified but DestCidrIp is not specified, the NicType parameter can be set only to intranet.
-   * *   If both DestGroupId and DestCidrIp are specified, DestCidrIp takes precedence.
+   * - At least one of the DestGroupId, DestCidrIp, Ipv6DestCidrIp, or DestPrefixListId parameters must be specified.
+   * - If DestGroupId is specified without DestCidrIp, the NicType parameter can only be set to intranet.
+   * - If both DestGroupId and DestCidrIp are specified, DestCidrIp takes precedence by default.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -43,7 +43,7 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   destGroupId?: string;
   /**
    * @remarks
-   * The Alibaba Cloud account that manages the destination security group when you set security group rule N across accounts.
+   * The Alibaba Cloud account that owns the destination security group when you set security group rules across accounts.
    * 
    * @example
    * EcsforCloud@Alibaba.com
@@ -51,7 +51,7 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   destGroupOwnerAccount?: string;
   /**
    * @remarks
-   * The ID of the Alibaba Cloud account that manages the destination security group when you set security group rule N across accounts.
+   * The ID of the Alibaba Cloud account that owns the destination security group when you set security group rules across accounts.
    * 
    * @example
    * 1234567890
@@ -59,9 +59,9 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   destGroupOwnerId?: number;
   /**
    * @remarks
-   * The ID of the destination prefix list. You can call the [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) operation to query the IDs of available prefix lists.
+   * The ID of the destination prefix list. You can call [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) to query available prefix list IDs.
    * 
-   * If you specify `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId`, this parameter is ignored.
+   * This parameter is ignored when any of the `DestCidrIp`, `Ipv6DestCidrIp`, or `DestGroupId` parameters is specified.
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****
@@ -69,25 +69,21 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   destPrefixListId?: string;
   /**
    * @remarks
-   * Network Layer /transport layer protocol. Two types of assignments are supported:
-   * 
-   * 1.  The case-insensitive protocol name. Valid values:
-   * 
-   * *   ICMP
-   * *   GRE
-   * *   TCP
-   * *   UDP
-   * *   ALL: supports all protocols.
-   * 
-   * 2.  The value of the IANA-compliant protocol number, which is an integer from 0 to 255. List of regions currently available:
-   * 
-   * *   Philippines (Manila)
-   * *   UK (London)
-   * *   Malaysia (Kuala Lumpur)
-   * *   China (Hohhot)
-   * *   China (Qingdao)
-   * *   US (Silicon Valley)
-   * *   Singapore
+   * The network/transport layer protocol. Two types of values are supported:
+   * 1. Case-insensitive protocol names. Valid values:
+   * - ICMP
+   * - GRE
+   * - TCP
+   * - UDP
+   * - ALL: supports all protocols.
+   * 2. Protocol numbers that comply with IANA specifications, which are integers from 0 to 255. Currently available regions:
+   * - Philippines
+   * - UK (London)
+   * - Malaysia
+   * - Hohhot
+   * - Qingdao
+   * - US West
+   * - Singapore
    * 
    * @example
    * tcp
@@ -95,11 +91,11 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   ipProtocol?: string;
   /**
    * @remarks
-   * The destination IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The destination IPv6 CIDR block. CIDR format and IPv6 format are supported.
    * 
-   * >  Only the IP addresses of instances in virtual private clouds (VPCs) are supported. You cannot specify both Ipv6DestCidrIp and `DestCidrIp`.
+   * > Only VPC-type IP addresses are supported. This parameter and `DestCidrIp` cannot be specified at the same time.
    * 
-   * By default, this parameter is left empty.
+   * Default value: none.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -107,11 +103,11 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * The source IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * The source IPv6 CIDR block. CIDR format and IPv6 format are supported.
    * 
-   * >  Only the IP addresses of instances in VPCs are supported. You cannot specify both Ipv6SourceCidrIp and `SourceCidrIp`.
+   * > Only VPC-type IP addresses are supported. This parameter and `SourceCidrIp` cannot be specified at the same time.
    * 
-   * By default, this parameter is left empty.
+   * Default value: none.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -119,9 +115,10 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * The network interface controller (NIC) type.
+   * The NIC type.
+   * 
    * 
-   * >  You cannot modify this parameter when you modify a security group rule by specifying the ID of the rule. If you want to change the NIC type of a security group rule, you can create a security group rule of a desired NIC type and delete the existing rule.
+   * > When modifying a rule by security group rule ID, this parameter cannot be modified. If modification is needed, we recommend that you add a new rule first and then delete the current rule.
    * 
    * @example
    * intranet
@@ -131,10 +128,10 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The action of the security group rule. Valid values:
+   * The access control policy. Valid values:
    * 
-   * *   accept: allows access.
-   * *   drop: denies access and returns no responses.
+   * - accept: accepts access requests.
+   * - drop: denies access requests without returning a rejection response.
    * 
    * Default value: accept.
    * 
@@ -144,12 +141,12 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * The range of destination ports that correspond to the transport layer protocol. Valid values:
+   * The range of destination ports relevant to the transport layer protocol. Valid values:
    * 
-   * *   If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port number range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port number range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port number range is -1/-1.
+   * - TCP/UDP protocol: Valid values are 1 to 65535. Use a forward slash (/) to separate the start port and the end port. Example: 1/200.
+   * - ICMP protocol: -1/-1.
+   * - GRE protocol: -1/-1.
+   * - ALL: -1/-1.
    * 
    * @example
    * 80/80
@@ -157,10 +154,10 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * The ID of the port list. You can call the `DescribePortRangeLists` operation to query the IDs of available prefix lists.
-   * 
-   * *   If you specify PortRange, the value of this parameter is ignored.
-   * *   If the security group is of the classic network type, you cannot reference port lists in the security group rules. For information about the limits on security groups and port lists, see the [Security groups](~~25412#SecurityGroupQuota1~~) section of the "Limits and quotas" topic.
+   * The port range list ID.
+   * You can call `DescribePortRangeLists` to query available port range list IDs.
+   * - This parameter is ignored when the PortRange parameter is specified.
+   * - Port range lists are not supported for security groups of the classic network type. For more information about the usage limits of security groups and port range lists, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * prl-2ze9743****
@@ -178,7 +175,7 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the source security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the latest region list of Alibaba Cloud.
    * 
    * This parameter is required.
    * 
@@ -190,7 +187,7 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The ID of the security group.
+   * The security group ID.
    * 
    * This parameter is required.
    * 
@@ -200,7 +197,7 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   securityGroupId?: string;
   /**
    * @remarks
-   * The ID of the security group rule. You can call the [DescribeSecurityGroupAttribute](https://help.aliyun.com/document_detail/2679845.html) operation to query the IDs of security group rules in a security group.
+   * The security group rule ID. You can call [DescribeSecurityGroupAttribute](https://help.aliyun.com/document_detail/2679845.html) to query security group rule IDs.
    * 
    * @example
    * sgr-bp67acfmxazb4q****
@@ -208,9 +205,9 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   securityGroupRuleId?: string;
   /**
    * @remarks
-   * The source IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The source IPv4 CIDR block. CIDR format and IPv4 format are supported.
    * 
-   * By default, this parameter is left empty.
+   * Default value: none.
    * 
    * @example
    * 10.0.0.0/8
@@ -218,12 +215,12 @@ export class ModifySecurityGroupEgressRuleRequest extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * The range of source ports that correspond to the transport layer protocol. Valid values:
+   * The range of source ports relevant to the transport layer protocol. Valid values:
    * 
-   * *   If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port number range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port number range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port number range is -1/-1.
+   * - TCP/UDP protocol: Valid values are 1 to 65535. Use a forward slash (/) to separate the start port and the end port. Example: 1/200.
+   * - ICMP protocol: -1/-1.
+   * - GRE protocol: -1/-1.
+   * - ALL: -1/-1.
    * 
    * @example
    * 80/80

package/src/models/ModifySecurityGroupPolicyRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifySecurityGroupPolicyRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **token** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -13,12 +13,12 @@ export class ModifySecurityGroupPolicyRequest extends $dara.Model {
   clientToken?: string;
   /**
    * @remarks
-   * The internal access control policy of the security group. Valid values:
+   * The internal connectivity policy between ECS instances in the security group. Valid values:
    * 
-   * *   Accept: the internal interconnectivity policy
-   * *   Drop: the internal isolation policy
+   * - Accept: intra-group connectivity
+   * - Drop: internal isolation
    * 
-   * >  The value of this parameter is case-insensitive.
+   * >The value is case-insensitive.
    * 
    * This parameter is required.
    * 
@@ -30,7 +30,7 @@ export class ModifySecurityGroupPolicyRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 

package/src/models/ModifySecurityGroupRuleRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifySecurityGroupRuleRequest extends $dara.Model {
   /**
    * @remarks
-   * The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The **token** can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
+   * A client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but make sure that the token is unique among different requests. The **ClientToken** value can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see [How to ensure idempotence](https://help.aliyun.com/document_detail/25693.html).
    * 
    * @example
    * 123e4567-e89b-12d3-a456-426655440000
@@ -21,9 +21,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   description?: string;
   /**
    * @remarks
-   * The destination IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * The destination IPv4 Classless Inter-Domain Routing (CIDR) block. CIDR format and IPv4 format IP address range are supported.
    * 
-   * By default, this parameter is left empty.
+   * Default value: null.
    * 
    * @example
    * 10.0.0.0/8
@@ -31,37 +31,33 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   destCidrIp?: string;
   /**
    * @remarks
-   * Network Layer /transport layer protocol. Two types of assignments are supported:
-   * 
-   * 1.  The case-insensitive protocol name. Valid values:
-   * 
-   * *   ICMP
-   * *   GRE
-   * *   TCP
-   * *   UDP
-   * *   ALL: supports all protocols.
-   * 
-   * 2.  The value of the IANA-compliant protocol number, which is an integer from 0 to 255. List of regions currently available:
-   * 
-   * *   Philippines (Manila)
-   * *   UK (London)
-   * *   Malaysia (Kuala Lumpur)
-   * *   China (Hohhot)
-   * *   China (Qingdao)
-   * *   US (Silicon Valley)
-   * *   Singapore
+   * The network-layer or transport-layer protocol. Two types of values are supported:
+   * 1. Case-insensitive protocol names. Valid values:
+   * - ICMP
+   * - GRE
+   * - TCP
+   * - UDP
+   * - ALL: all protocols are supported.
+   * 2. Protocol numbers that comply with IANA specifications, which are integers from 0 to 255. The following regions currently support this feature:
+   * - Philippines
+   * - UK (London)
+   * - Malaysia
+   * - China (Hohhot)
+   * - China (Qingdao)
+   * - US (Virginia)
+   * - Singapore.
    * 
    * @example
-   * all
+   * ALL
    */
   ipProtocol?: string;
   /**
    * @remarks
-   * The destination IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * Settings for the destination IPv6 CIDR block. CIDR format and IPv6 format IP address range are supported.
    * 
-   * >  Only the IP addresses of instances in VPCs are supported. You cannot specify both Ipv6DestCidrIp and `DestCidrIp`.
+   * > Only VPC-type IP addresses are supported. This parameter and `DestCidrIp` cannot be specified at the same time.
    * 
-   * By default, this parameter is left empty.
+   * Default value: null.
    * 
    * @example
    * 2001:db8:1234:1a00::***
@@ -69,11 +65,11 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   ipv6DestCidrIp?: string;
   /**
    * @remarks
-   * The source IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.
+   * Settings for the source IPv6 CIDR block for the access permissions. Classless Inter-Domain Routing (CIDR) format and IPv6 format IP address range are supported.
    * 
-   * >  Only the IP addresses of instances in virtual private clouds (VPCs) are supported. You cannot specify both Ipv6SourceCidrIp and `SourceCidrIp`.
+   * > Only VPC-type IP addresses are supported. This parameter and `SourceCidrIp` cannot be specified at the same time.
    * 
-   * By default, this parameter is left empty.
+   * Default value: null.
    * 
    * @example
    * 2001:db8:1233:1a00::***
@@ -81,9 +77,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   ipv6SourceCidrIp?: string;
   /**
    * @remarks
-   * The type of the network interface controller (NIC).
+   * The network interface controller (NIC) type.
    * 
-   * >  You cannot modify this parameter when you modify a security group rule by specifying the ID of the rule. If you want to change the NIC type of a security group rule, you can create a security group rule of a desired NIC type and delete the existing rule.
+   * > When you modify a rule by specifying the security group rule ID, this parameter cannot be modified. To change this value, add a new rule and then delete the current rule.
    * 
    * @example
    * intranet
@@ -93,10 +89,10 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The action of the security group rule. Valid values:
-   * 
-   * *   accept: allows access.
-   * *   drop: denies access and returns no responses.
+   * The access permissions. Valid values: 
+   *          
+   * - accept: accepts access.
+   * - drop: deny access and does not return a rejection response.
    * 
    * Default value: accept.
    * 
@@ -106,12 +102,12 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   policy?: string;
   /**
    * @remarks
-   * The range of destination ports that correspond to the transport layer protocol. Valid values:
-   * 
-   * *   If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port number range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port number range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port number range is -1/-1.
+   * The range of destination ports that correspond to the transport-layer protocol. Valid values: 
+   *          
+   * - TCP/UDP: valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
    * @example
    * 80/80
@@ -119,10 +115,10 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   portRange?: string;
   /**
    * @remarks
-   * The ID of the port list. You can call the `DescribePortRangeLists` operation to query the IDs of available port lists.
-   * 
-   * *   If you specify PortRange, this parameter is ignored.
-   * *   If a security group is in the classic network, you cannot configure port lists in the rules of the security group. For information about the limits on security groups and port lists, see [Security group limits](~~25412#SecurityGroupQuota1~~).
+   * Settings for the port address book ID.
+   * You can invoke `DescribePortRangeLists` to query available port address book IDs.
+   * - This parameter is ignored if you specify the PortRange parameter.
+   * - Port address books are not supported for security groups with the classic network type. For more information about the limits of security groups and port address books, see [Security group limits](~~25412#SecurityGroupQuota1~~).
    * 
    * @example
    * prl-2ze9743****
@@ -140,7 +136,7 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   priority?: string;
   /**
    * @remarks
-   * The region ID of the security group. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The region ID of the target security group. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to query the most recent region list.
    * 
    * This parameter is required.
    * 
@@ -162,7 +158,7 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   securityGroupId?: string;
   /**
    * @remarks
-   * The ID of the security group rule. You can call the [DescribeSecurityGroupAttribute](https://help.aliyun.com/document_detail/2679845.html) operation to query the IDs of security group rules in a security group.
+   * The security group rule ID. You can call [DescribeSecurityGroupAttribute](https://help.aliyun.com/document_detail/2679845.html) to query security group rule IDs.
    * 
    * @example
    * sgr-bp67acfmxa123b***
@@ -170,9 +166,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   securityGroupRuleId?: string;
   /**
    * @remarks
-   * The source IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.
+   * Settings for the source IPv4 CIDR block for the access permissions. Classless Inter-Domain Routing (CIDR) format and IPv4 format IP address range are supported.
    * 
-   * By default, this parameter is left empty.
+   * Default value: null.
    * 
    * @example
    * 10.0.0.0/8
@@ -180,10 +176,10 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   sourceCidrIp?: string;
   /**
    * @remarks
-   * The source security group ID. You must specify either `SourceGroupId` or `SourceCidrIp` or specify both of them.
+   * Settings for the ID of the source security group for the access permissions. Specify at least one of `SourceGroupId` and `SourceCidrIp`.
    * 
-   * *   If `SourceGroupId` is specified but `SourceCidrIp` is not specified, the value of `NicType` must be set to intranet.
-   * *   If both `SourceGroupId` and `SourceCidrIp` are specified, the value of `SourceCidrIp` prevails by default.
+   * - If `SourceGroupId` is specified but `SourceCidrIp` is not, the `NicType` parameter can only be set to intranet.
+   * - If both `SourceGroupId` and `SourceCidrIp` are specified, `SourceCidrIp` takes precedence by default.
    * 
    * @example
    * sg-bp67acfmxa123b****
@@ -191,10 +187,10 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   sourceGroupId?: string;
   /**
    * @remarks
-   * The Alibaba Cloud account that manages the source security group when you configure a security group rule across accounts.
-   * 
-   * *   If both `SourceGroupOwnerId` and `SourceGroupOwnerAccount` are empty, access permissions are configured for another security group managed by your account.
-   * *   If `SourceCidrIp` is specified, `SourceGroupOwnerAccount` is ignored.
+   * The Alibaba Cloud account that owns the source security group when you configure a cross-account security group rule. 
+   *          
+   * - If neither `SourceGroupOwnerAccount` nor `SourceGroupOwnerID` is set, the rule is configured for access permissions of another security group within your account.
+   * - If the parameter `SourceCidrIp` is specified, the parameter `SourceGroupOwnerAccount` is ignored.
    * 
    * @example
    * EcsforCloud@Alibaba.com
@@ -202,10 +198,10 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   sourceGroupOwnerAccount?: string;
   /**
    * @remarks
-   * The ID of the Alibaba Cloud account that manages the source security group when you configure a security group rule across accounts.
-   * 
-   * *   If both `SourceGroupOwnerId` and `SourceGroupOwnerAccount` are empty, access permissions are configured for another security group managed by your account.
-   * *   If `SourceCidrIp` is specified, `SourceGroupOwnerId` is ignored.
+   * The Alibaba Cloud account that owns the source security group when you configure a cross-account security group rule. 
+   *          
+   * - If neither `SourceGroupOwnerId` nor `SourceGroupOwnerAccount` is set, the rule is configured for access permissions of another security group within your account.
+   * - If the parameter `SourceCidrIp` is specified, the parameter `SourceGroupOwnerId` is ignored.
    * 
    * @example
    * 12345678910
@@ -213,12 +209,12 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   sourceGroupOwnerId?: number;
   /**
    * @remarks
-   * The range of source ports that correspond to the transport layer protocol. Valid values:
-   * 
-   * *   If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
-   * *   If you set IpProtocol to ICMP, the port number range is -1/-1.
-   * *   If you set IpProtocol to GRE, the port number range is -1/-1.
-   * *   If you set IpProtocol to ALL, the port number range is -1/-1.
+   * The range of source ports that correspond to the transport-layer protocol. Valid values: 
+   *          
+   * - TCP/UDP: valid values are 1 to 65535. Separate the start port and the end port with a forward slash (/). Example: 1/200.
+   * - ICMP: -1/-1.
+   * - GRE: -1/-1.
+   * - ALL: -1/-1.
    * 
    * @example
    * 80/80
@@ -226,9 +222,9 @@ export class ModifySecurityGroupRuleRequest extends $dara.Model {
   sourcePortRange?: string;
   /**
    * @remarks
-   * The ID of the source prefix list to which you want to control access. You can call the [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) operation to query the IDs of available prefix lists.
+   * Settings for the ID of the source prefix list for the access permissions. You can invoke [DescribePrefixLists](https://help.aliyun.com/document_detail/205046.html) to query available prefix list IDs.
    * 
-   * If you specify `SourceCidrIp`, `Ipv6SourceCidrIp`, or `SourceGroupId`, this parameter is ignored.
+   * This parameter is ignored if you specify one of the `SourceCidrIp`, `Ipv6SourceCidrIp`, or `SourceGroupId` parameters.
    * 
    * @example
    * pl-x1j1k5ykzqlixdcy****

package/src/models/ModifySnapshotAttributeRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class ModifySnapshotAttributeRequest extends $dara.Model {
   /**
    * @remarks
-   * The snapshot description. It can be empty or up to 256 characters in length. It cannot start with http:// or https://.
+   * The snapshot description. It can be empty or up to 256 characters in length. It cannot start with http\\:// or https\\://.
    * 
    * @example
    * testDescription
@@ -15,12 +15,13 @@ export class ModifySnapshotAttributeRequest extends $dara.Model {
    * @remarks
    * Specifies whether to disable the instant access feature. Valid values:
    * 
-   * *   true
-   * *   false
+   * - true
+   * 
+   * - false
    * 
    * Default value: false.
    * 
-   * >  This parameter is no longer used. By default, new standard snapshots of Enterprise SSDs (ESSDs) are upgraded to instant access snapshots free of charge without the need for additional configurations. For more information, see [Use the instant access feature](https://help.aliyun.com/document_detail/193667.html).
+   * > This parameter is no longer used. By default, new standard snapshots of Enterprise SSDs (ESSDs) are upgraded to instant access snapshots free of charge without the need for additional configurations. For more information, see [Use the instant access feature](https://help.aliyun.com/document_detail/193667.html).
    * 
    * @example
    * false
@@ -34,7 +35,7 @@ export class ModifySnapshotAttributeRequest extends $dara.Model {
    * @remarks
    * The retention period of the snapshot. After you specify this parameter, the end time of the new retention period is the specified number of days apart from the **creation time** of the snapshot, which follows the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format and is displayed in UTC. Valid values: 1 to 65536.
    * 
-   * >  You can extend the retention period of the snapshot and cannot shorten the retention period.
+   * > You can extend the retention period of the snapshot and cannot shorten the retention period.
    * 
    * @example
    * 10
@@ -52,7 +53,7 @@ export class ModifySnapshotAttributeRequest extends $dara.Model {
   snapshotId?: string;
   /**
    * @remarks
-   * The name of the snapshot. The name must be 2 to 128 characters in length. It must start with a letter and cannot start with http:// or https://. It can contain letters, digits, colons (:), underscores (_), and hyphens (-).
+   * The name of the snapshot. The name must be 2 to 128 characters in length. It must start with a letter and cannot start with http\\:// or https\\://. It can contain letters, digits, colons (:), underscores (_), and hyphens (-).
    * 
    * The name cannot start with auto because snapshots whose names start with auto are recognized as automatic snapshots.
    * 

package/src/models/ModifySnapshotCategoryRequest.ts

@@ -5,9 +5,9 @@ import * as $dara from '@darabonba/typescript';
 export class ModifySnapshotCategoryRequest extends $dara.Model {
   /**
    * @remarks
-   * The type of the snapshot.
+   * The snapshot type.
    * 
-   * *   Archive: archive snapshot
+   * - Archive: archive snapshot.
    * 
    * @example
    * Archive
@@ -19,21 +19,21 @@ export class ModifySnapshotCategoryRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The retention period of the snapshot. Unit: days. The retention period started at the point in time when the snapshot was created. You can archive only standard snapshots that have been retained for at least 14 days.
+   * The number of days for which the snapshot is retained. The retention period starts from the snapshot creation time (CreationTime). A standard snapshot must have been retained for at least 14 days after creation before it can be archived.
    * 
-   * After the snapshot is archived, the minimum retention period (also called minimum archive period) is 60 days. When you calculate the retention period of archived snapshots, you must deduct the retention period of standard snapshots. If you delete the snapshot within 60 days after the snapshot is archived, you are charged archive tier storage fees for the snapshot for 60 days. For more information about the billing of snapshots, see [Snapshots](https://help.aliyun.com/document_detail/56159.html).
+   * Archive snapshots must be retained for at least 60 days. When the retention period of an archive snapshot is calculated, the retention period of the standard snapshot is deducted. If an archive snapshot is deleted before 60 days, you are charged for 60 days of archive storage. For more information, see [Snapshot billing](https://help.aliyun.com/document_detail/56159.html).
    * 
-   * Value range [74,65536]
+   * Valid values: [74, 65536].
    * 
    * > If you do not specify this parameter, the snapshot is permanently retained.
    * 
    * @example
-   * 60
+   * 100
    */
   retentionDays?: number;
   /**
    * @remarks
-   * The ID of the snapshot.
+   * The snapshot ID.
    * 
    * This parameter is required.
    *