@alicloud/ecs20140526 7.8.4 → 7.8.6

package/src/models/DescribeDeploymentSetsRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class DescribeDeploymentSetsRequest extends $dara.Model {
   /**
    * @remarks
-   * The IDs of deployment sets. The value can be a JSON array that consists of deployment set IDs in the format of `["ds-xxxxxxxxx", "ds-yyyyyyyyy", ... "ds-zzzzzzzzz"]`. You can specify up to 100 deployment set IDs in each request. Separate the deployment set IDs with commas (,).
+   * The IDs of the deployment sets. The value can be a JSON array that consists of up to 100 deployment set IDs. Sample format: `["ds-xxxxxxxxx", "ds-yyyyyyyyy", … "ds-zzzzzzzzz"]`.
    * 
    * @example
    * ["ds-bp67acfmxazb4ph****", "ds-bp67acfmxazb4pi****", … "ds-bp67acfmxazb4pj****"]
@@ -13,7 +13,7 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
   deploymentSetIds?: string;
   /**
    * @remarks
-   * The name of the deployment set. The name must be 2 to 128 characters in length. The name must start with a letter and cannot start with `http://` or `https://`. The name can contain digits, letters, colons (:), underscores (_), and hyphens (-).
+   * The name of the deployment set. The name must be 2 to 128 characters in length and can contain letters, digits, colons (:), underscores (_), periods (.), and hyphens (-).
    * 
    * @example
    * testDeploymentSetName
@@ -21,7 +21,7 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
   deploymentSetName?: string;
   /**
    * @remarks
-   * >  This parameter is deprecated.
+   * > This parameter is deprecated.
    * 
    * @example
    * null
@@ -29,7 +29,7 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
   domain?: string;
   /**
    * @remarks
-   * >  This parameter is deprecated.
+   * > This parameter is deprecated.
    * 
    * @example
    * null
@@ -37,7 +37,7 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
   granularity?: string;
   /**
    * @remarks
-   * >  This parameter is deprecated.
+   * > This parameter is deprecated.
    * 
    * @example
    * null
@@ -49,7 +49,7 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
    * @remarks
    * The page number.
    * 
-   * Pages start from page 1.
+   * Starts at 1.
    * 
    * Default value: 1.
    * 
@@ -59,9 +59,9 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
   pageNumber?: number;
   /**
    * @remarks
-   * The number of entries to return on each page.
+   * The number of entries per page.
    * 
-   * Valid values: 1 to 50.
+   * Maximum value: 50.
    * 
    * Default value: 10.
    * 
@@ -71,7 +71,7 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
   pageSize?: number;
   /**
    * @remarks
-   * The region ID of the deployment set. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The ID of the region where the deployment set is located. You can call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to view the latest list of Alibaba Cloud regions.
    * 
    * This parameter is required.
    * 
@@ -85,13 +85,31 @@ export class DescribeDeploymentSetsRequest extends $dara.Model {
    * @remarks
    * The deployment strategy. Valid values:
    * 
-   * *   Availability: high availability strategy
-   * *   AvailabilityGroup: high availability group strategy
+   * - Availability: high availability strategy.
+   * 
+   * - AvailabilityGroup: high availability group strategy.
+   * 
+   * - LowLatency: low-latency strategy.
    * 
    * @example
    * Availability
    */
   strategy?: string;
+  /**
+   * @remarks
+   * The deployment type. Valid values:
+   * 
+   * - host: Ensures that the instances in the deployment set are deployed on different hosts.
+   * 
+   * - sw: Ensures that the instances in the deployment set are deployed on different switches.
+   * 
+   * - rack: Ensures that the instances in the deployment set are deployed on different racks.
+   * 
+   * Default value: host.
+   * 
+   * @example
+   * host
+   */
   type?: string;
   static names(): { [key: string]: string } {
     return {

package/src/models/DescribeDeploymentSetsResponseBody.ts

@@ -181,10 +181,14 @@ export class DescribeDeploymentSetsResponseBodyDeploymentSets extends $dara.Mode
 }
 
 export class DescribeDeploymentSetsResponseBody extends $dara.Model {
+  /**
+   * @remarks
+   * Details of deployment sets.
+   */
   deploymentSets?: DescribeDeploymentSetsResponseBodyDeploymentSets;
   /**
    * @remarks
-   * The page number.
+   * The page number of the deployment set list.
    * 
    * @example
    * 1
@@ -192,7 +196,7 @@ export class DescribeDeploymentSetsResponseBody extends $dara.Model {
   pageNumber?: number;
   /**
    * @remarks
-   * The number of entries per page.
+   * The number of entries returned per page.
    * 
    * @example
    * 1
@@ -216,10 +220,10 @@ export class DescribeDeploymentSetsResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * The total number of queried deployment sets.
+   * The total number of deployment sets.
    * 
    * @example
-   * 1
+   * 5
    */
   totalCount?: number;
   static names(): { [key: string]: string } {

package/src/models/DescribeDiagnosticMetricSetsRequest.ts

@@ -9,8 +9,9 @@ export class DescribeDiagnosticMetricSetsRequest extends $dara.Model {
    * 
    * Default value:
    * 
-   * *   If this parameter is left empty, the default value is 10.
-   * *   If you set this parameter to a value that is greater than 100, the default value is 100.
+   * - If this parameter is left empty, the default value is 10.
+   * 
+   * - If you set this parameter to a value that is greater than 100, the default value is 100.
    * 
    * @example
    * 10
@@ -51,8 +52,9 @@ export class DescribeDiagnosticMetricSetsRequest extends $dara.Model {
    * @remarks
    * The type of the diagnostic metric set. Valid values:
    * 
-   * *   User: custom diagnostic metric set
-   * *   Common: public diagnostic metric set
+   * - User: custom diagnostic metric set
+   * 
+   * - Common: public diagnostic metric set
    * 
    * Default value: User.
    * 

package/src/models/DescribeDiagnosticMetricSetsResponseBody.ts

@@ -8,7 +8,7 @@ export class DescribeDiagnosticMetricSetsResponseBodyMetricSets extends $dara.Mo
    * The description of the diagnostic metric set.
    * 
    * @example
-   * connection issue diagnostics
+   * 远程连接问题诊断
    */
   description?: string;
   /**
@@ -29,7 +29,7 @@ export class DescribeDiagnosticMetricSetsResponseBodyMetricSets extends $dara.Mo
    * The name of the diagnostic metric set.
    * 
    * @example
-   * connection issue diagnostics
+   * 远程连接问题诊断
    */
   metricSetName?: string;
   /**
@@ -44,8 +44,9 @@ export class DescribeDiagnosticMetricSetsResponseBodyMetricSets extends $dara.Mo
    * @remarks
    * The type of the diagnostic metric set. Valid values:
    * 
-   * *   User: user-defined diagnostic metric set
-   * *   Common: common diagnostic metric set
+   * - User: user-defined diagnostic metric set
+   * 
+   * - Common: common diagnostic metric set
    * 
    * @example
    * User

package/src/models/DescribeDiagnosticMetricsRequest.ts

@@ -9,8 +9,9 @@ export class DescribeDiagnosticMetricsRequest extends $dara.Model {
    * 
    * Default value:
    * 
-   * *   If this parameter is left empty, the default value is 10.
-   * *   If you set this parameter to a value that is greater than 100, the default value is 100.
+   * - If this parameter is left empty, the default value is 10.
+   * 
+   * - If you set this parameter to a value that is greater than 100, the default value is 100.
    * 
    * @example
    * 10

package/src/models/DescribeDiagnosticMetricsResponseBody.ts

@@ -8,7 +8,7 @@ export class DescribeDiagnosticMetricsResponseBodyMetrics extends $dara.Model {
    * The description of the diagnostic metric.
    * 
    * @example
-   * CPU diagnostic
+   * CPU诊断
    */
   description?: string;
   /**
@@ -40,7 +40,7 @@ export class DescribeDiagnosticMetricsResponseBodyMetrics extends $dara.Model {
    * The name of the diagnostic metric.
    * 
    * @example
-   * CPU diagnostic
+   * CPU诊断
    */
   metricName?: string;
   /**
@@ -55,9 +55,11 @@ export class DescribeDiagnosticMetricsResponseBodyMetrics extends $dara.Model {
    * @remarks
    * The operating system type supported by the diagnostic metric. Valid values:
    * 
-   * *   Windows
-   * *   Linux
-   * *   All: Windows and Linux
+   * - Windows
+   * 
+   * - Linux
+   * 
+   * - All: Windows and Linux
    * 
    * @example
    * ALL

package/src/models/DescribeDiagnosticReportAttributesRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class DescribeDiagnosticReportAttributesRequest extends $dara.Model {
   /**
    * @remarks
-   * The region ID of the diagnostic report. You can call the [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) operation to query the most recent region list.
+   * The ID of the region. Call [DescribeRegions](https://help.aliyun.com/document_detail/25609.html) to get the latest list of Alibaba Cloud regions.
    * 
    * This parameter is required.
    * 

package/src/models/DescribeDiagnosticReportAttributesResponseBody.ts

@@ -136,9 +136,7 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
    * The extended attributes of the diagnostic report.
    * 
    * @example
-   * {
-   *     "OfflineDiagReportStatus":"CONFIRMED"
-   * }
+   * {"OfflineDiagReportStatus":"CONFIRMED"}
    */
   attributes?: string;
   /**
@@ -151,7 +149,7 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
   creationTime?: string;
   /**
    * @remarks
-   * The end of the reporting period of the diagnostic report. The value is the EndTime value that was passed in when you called the [CreateDiagnosticReport](https://help.aliyun.com/document_detail/442490.html) operation to create the diagnostic report.
+   * The end of the diagnostic time range. This value corresponds to the `EndTime` parameter you provided when calling the [CreateDiagnosticReport](https://help.aliyun.com/document_detail/442490.html) operation.
    * 
    * @example
    * 2022-07-11T14:00:00Z
@@ -159,16 +157,20 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
   endTime?: string;
   /**
    * @remarks
-   * The time when the diagnostic report was complete.
+   * The time when the diagnosis was complete.
    * 
    * @example
    * 2022-07-11T14:00:00Z
    */
   finishedTime?: string;
+  /**
+   * @remarks
+   * The diagnostic results for the metrics.
+   */
   metricResults?: DescribeDiagnosticReportAttributesResponseBodyMetricResults;
   /**
    * @remarks
-   * The ID of the diagnostic metric set.
+   * The metric set ID.
    * 
    * @example
    * dms-bp17p0qwtr72zmu*****
@@ -176,7 +178,7 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
   metricSetId?: string;
   /**
    * @remarks
-   * The ID of the diagnostic report, which is the unique identifier of the report.
+   * The unique ID of the diagnostic report.
    * 
    * @example
    * dr-uf6i0tv2refv8wz*****
@@ -200,7 +202,7 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
   resourceId?: string;
   /**
    * @remarks
-   * The type of the resource. ResourceType can only be set to instance, which indicates that only instances are supported.
+   * The resource type. Only `instance` is supported.
    * 
    * @example
    * instance
@@ -208,13 +210,17 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
   resourceType?: string;
   /**
    * @remarks
-   * The severity level of the diagnostic report. The value of this parameter is determined by the highest severity level of all diagnostic metrics. Valid values:
+   * The overall severity level of the diagnostic report. This is the highest severity level among all metrics in the report. Valid values are listed below, from lowest to highest severity:
+   * 
+   * - Unknown: The initial state. The diagnosis has not started or exited unexpectedly, so the result is inconclusive.
+   * 
+   * - Normal: The resource is healthy, and no issues were found.
    * 
-   * *   Unknown: The diagnostic has not started, failed to run, or exited unexpectedly without a diagnosis.
-   * *   Normal: No exceptions were detected.
-   * *   Info: Diagnostic information was recorded and may be related to exceptions.
-   * *   Warn: Diagnostic information was recorded and may indicate potential exceptions.
-   * *   Critical: Critical exceptions were detected.
+   * - Info: Informational messages were found that may be relevant to an issue.
+   * 
+   * - Warn: Warnings were found that may lead to an issue.
+   * 
+   * - Critical: Critical issues were found.
    * 
    * @example
    * Normal
@@ -222,7 +228,7 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
   severity?: string;
   /**
    * @remarks
-   * The beginning of the reporting period of the diagnostic report. The value is the StartTime value that was passed in when you called the [CreateDiagnosticReport](https://help.aliyun.com/document_detail/442490.html) operation to create the diagnostic report.
+   * The start of the diagnostic time range. This value corresponds to the `StartTime` parameter you provided when calling the [CreateDiagnosticReport](https://help.aliyun.com/document_detail/442490.html) operation.
    * 
    * @example
    * 2022-07-11T12:00:00Z
@@ -230,11 +236,13 @@ export class DescribeDiagnosticReportAttributesResponseBody extends $dara.Model
   startTime?: string;
   /**
    * @remarks
-   * The state of the diagnostic report. Valid values:
+   * The status of the diagnostic report. Possible values:
+   * 
+   * - InProgress: The diagnosis is in progress.
+   * 
+   * - Finished: The diagnosis is complete.
    * 
-   * *   InProgress: The diagnostic is in progress.
-   * *   Finished: The diagnostic is complete.
-   * *   Failed: The diagnostic failed.
+   * - Failed: The diagnosis failed.
    * 
    * @example
    * Finished

package/src/models/DescribeDiagnosticReportsRequest.ts

@@ -9,8 +9,9 @@ export class DescribeDiagnosticReportsRequest extends $dara.Model {
    * 
    * Default value:
    * 
-   * *   If this parameter is left empty, the default value is 10.
-   * *   If you set this parameter to a value that is greater than 100, the default value is 100.
+   * - If this parameter is left empty, the default value is 10.
+   * 
+   * - If you set this parameter to a value that is greater than 100, the default value is 100.
    * 
    * @example
    * 10
@@ -48,11 +49,15 @@ export class DescribeDiagnosticReportsRequest extends $dara.Model {
    * @remarks
    * The severity level of the diagnostic report. Valid values:
    * 
-   * *   Unknown: The diagnostic did not start, failed to run, or unexpectedly exited without a diagnosis.
-   * *   Normal: No exceptions were detected.
-   * *   Info: Diagnostic information was recorded and may be related to exceptions.
-   * *   Warn: Diagnostic information was recorded and may indicate exceptions.
-   * *   Critical: Critical exceptions were detected.
+   * - Unknown: The diagnostic did not start, failed to run, or unexpectedly exited without a diagnosis.
+   * 
+   * - Normal: No exceptions were detected.
+   * 
+   * - Info: Diagnostic information was recorded and may be related to exceptions.
+   * 
+   * - Warn: Diagnostic information was recorded and may indicate exceptions.
+   * 
+   * - Critical: Critical exceptions were detected.
    * 
    * @example
    * Normal
@@ -62,9 +67,11 @@ export class DescribeDiagnosticReportsRequest extends $dara.Model {
    * @remarks
    * The status of the diagnostic report. Valid values:
    * 
-   * *   InProgress
-   * *   Failed
-   * *   Finished
+   * - InProgress
+   * 
+   * - Failed
+   * 
+   * - Finished
    * 
    * @example
    * Finished

package/src/models/DescribeDiskEncryptionByDefaultStatusResponseBody.ts

@@ -7,8 +7,9 @@ export class DescribeDiskEncryptionByDefaultStatusResponseBody extends $dara.Mod
    * @remarks
    * Indicates whether account-level default encryption of EBS resources is enabled in the region. Valid values:
    * 
-   * *   true
-   * *   false
+   * - true
+   * 
+   * - false
    * 
    * Default value: false.
    * 

package/src/models/DescribeDiskMonitorDataRequest.ts

@@ -5,7 +5,7 @@ import * as $dara from '@darabonba/typescript';
 export class DescribeDiskMonitorDataRequest extends $dara.Model {
   /**
    * @remarks
-   * The ID of the cloud disk that you want to query.
+   * The ID of the disk to query.
    * 
    * This parameter is required.
    * 
@@ -15,7 +15,7 @@ export class DescribeDiskMonitorDataRequest extends $dara.Model {
   diskId?: string;
   /**
    * @remarks
-   * The end of the time range to query. Specify the time in the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the time is rounded up to the next minute.
+   * The end time of the data. Specify the time in the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the end time is automatically set to the beginning of the next minute.
    * 
    * This parameter is required.
    * 
@@ -27,15 +27,15 @@ export class DescribeDiskMonitorDataRequest extends $dara.Model {
   ownerId?: number;
   /**
    * @remarks
-   * The interval at which to retrieve the monitoring data. Unit: seconds. Valid values:
+   * The granularity of the data. Unit: seconds. Valid values:
    * 
-   * *   60
-   * *   600
-   * *   3600
+   * - 60.
+   * - 600.
+   * - 3600.
    * 
    * Default value: 60.
    * 
-   * >  Up to 400 monitoring data entries can be returned at a time. Make sure that the TotalCount value does not exceed 400. The value is calculated by using the following formula: TotalCount = (EndTime - StartTime)/Period.
+   * > The value of (EndTime – StartTime) / Period must be less than or equal to 400. A maximum of 400 data entries can be returned at a time.
    * 
    * @example
    * 60
@@ -45,9 +45,9 @@ export class DescribeDiskMonitorDataRequest extends $dara.Model {
   resourceOwnerId?: number;
   /**
    * @remarks
-   * The beginning of the time range to query. Specify the time in the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the time is rounded up to the next minute.
+   * The start time of the data. Specify the time in the [ISO 8601](https://help.aliyun.com/document_detail/25696.html) standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the start time is automatically set to the beginning of the next minute.
    * 
-   * >  You can query the monitoring data in the last 30 days. If the value of `StartTime` is more than 30 days earlier than the current time, an error is returned.
+   * > You can query the monitoring information of up to the last 30 days. The `StartTime` parameter cannot be more than 30 days earlier than the current time.
    * 
    * This parameter is required.
    * 

package/src/models/DescribeDiskMonitorDataResponseBody.ts

@@ -90,7 +90,7 @@ export class DescribeDiskMonitorDataResponseBody extends $dara.Model {
   requestId?: string;
   /**
    * @remarks
-   * The total number of monitoring data entries returned.
+   * The number of entries returned for disk usage information, which is the number of periods.
    * 
    * @example
    * 3

package/src/models/DescribeDisksFullStatusRequest.ts

@@ -110,10 +110,13 @@ export class DescribeDisksFullStatusRequest extends $dara.Model {
    * @remarks
    * The event type of the EBS device. Valid values:
    * 
-   * *   Degraded: The performance of the EBS device is degraded.
-   * *   SeverelyDegraded: The performance of the EBS device is severely degraded.
-   * *   Stalled: The performance of the EBS device is severely affected.
-   * *   ErrorDetected: The local disk is damaged.
+   * - Degraded: The performance of the EBS device is degraded.
+   * 
+   * - SeverelyDegraded: The performance of the EBS device is severely degraded.
+   * 
+   * - Stalled: The performance of the EBS device is severely affected.
+   * 
+   * - ErrorDetected: The local disk is damaged.
    * 
    * @example
    * Stalled
@@ -123,11 +126,15 @@ export class DescribeDisksFullStatusRequest extends $dara.Model {
    * @remarks
    * The health status of the EBS device. Valid values:
    * 
-   * *   Impaired: The EBS device is damaged.
-   * *   Warning: The performance of the EBS device is degraded.
-   * *   Initializing: The EBS device is being initialized.
-   * *   InsufficientData: The status cannot be determined due to insufficient data.
-   * *   NotApplicable: The EBS device cannot be used.
+   * - Impaired: The EBS device is damaged.
+   * 
+   * - Warning: The performance of the EBS device is degraded.
+   * 
+   * - Initializing: The EBS device is being initialized.
+   * 
+   * - InsufficientData: The status cannot be determined due to insufficient data.
+   * 
+   * - NotApplicable: The EBS device cannot be used.
    * 
    * @example
    * Warning
@@ -179,12 +186,17 @@ export class DescribeDisksFullStatusRequest extends $dara.Model {
    * @remarks
    * The lifecycle status of the EBS device. For more information, see [Disk status](https://help.aliyun.com/document_detail/25689.html). Valid values:
    * 
-   * *   In_use: The EBS device is in use.
-   * *   Available: The EBS device can be attached.
-   * *   Attaching: The EBS device is being attached.
-   * *   Detaching: The EBS device is being detached.
-   * *   Creating: The EBS device is being created.
-   * *   ReIniting: The EBS device is being initialized.
+   * - In_use: The EBS device is in use.
+   * 
+   * - Available: The EBS device can be attached.
+   * 
+   * - Attaching: The EBS device is being attached.
+   * 
+   * - Detaching: The EBS device is being detached.
+   * 
+   * - Creating: The EBS device is being created.
+   * 
+   * - ReIniting: The EBS device is being initialized.
    * 
    * @example
    * Available