wiringpi-ruby 2.0.0 → 2.0.1

data/ext/wiringpi/WiringPi/examples/PiGlow/piglow.c

@@ -0,0 +1,176 @@
+/*
+ * piglow.c:
+ *	Very simple demonstration of the PiGlow board.
+ *	This uses the piGlow devLib.
+ *
+ * Copyright (c) 2013 Gordon Henderson.
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+#ifndef	TRUE
+#  define TRUE  (1==1)
+#  define FALSE (!TRUE)
+#endif
+
+#include <wiringPi.h>
+#include <piGlow.h>
+
+static void failUsage (void)
+{
+  fprintf (stderr, "Usage examples:\n") ;
+  fprintf (stderr, "  piglow off         # All off\n") ;
+  fprintf (stderr, "  piglow red 50      # Light the 3 red LEDs to 50%%\n") ;
+  fprintf (stderr, "     colours are: red, yellow, orange, green, blue and white\n") ;
+  fprintf (stderr, "  piglow all 75      # Light all to 75%%\n") ;
+  fprintf (stderr, "  piglow leg 0 25    # Light leg 0 to 25%%\n") ;
+  fprintf (stderr, "  piglow ring 3 100  # Light ring 3 to 100%%\n") ;
+  fprintf (stderr, "  piglow led 2 5 100 # Light the single LED on Leg 2, ring 5 to 100%%\n") ;
+
+  exit (EXIT_FAILURE) ;
+}
+
+static int getPercent (char *typed)
+{
+  int percent ;
+
+  percent = atoi (typed) ;
+  if ((percent < 0) || (percent > 100))
+  {
+    fprintf (stderr, "piglow: percent value out of range\n") ;
+    exit (EXIT_FAILURE) ;
+  }
+  return (percent * 255) / 100 ;
+}
+
+
+/*
+ * main:
+ *	Our little demo prgoram
+ *********************************************************************************
+ */
+
+int main (int argc, char *argv [])
+{
+  int percent ;
+  int ring, leg ;
+
+// Always initialise wiringPi:
+//	Use the Sys method if you don't need to run as root
+
+  wiringPiSetupSys () ;
+
+// Initialise the piGlow devLib
+
+  piGlowSetup (FALSE) ;
+
+  if (argc == 1)
+    failUsage () ;
+
+  if ((argc == 2) && (strcasecmp (argv [1], "off") == 0))
+  {
+    for (leg = 0 ; leg < 3 ; ++leg)
+      piGlowLeg (leg, 0) ;
+    return 0 ;
+  }
+
+  if (argc == 3)
+  {
+    percent = getPercent (argv [2]) ;
+
+    /**/ if (strcasecmp (argv [1], "red") == 0)
+      piGlowRing (PIGLOW_RED, percent) ;
+    else if (strcasecmp (argv [1], "yellow") == 0)
+      piGlowRing (PIGLOW_YELLOW, percent) ;
+    else if (strcasecmp (argv [1], "orange") == 0)
+      piGlowRing (PIGLOW_ORANGE, percent) ;
+    else if (strcasecmp (argv [1], "green") == 0)
+      piGlowRing (PIGLOW_GREEN, percent) ;
+    else if (strcasecmp (argv [1], "blue") == 0)
+      piGlowRing (PIGLOW_BLUE, percent) ;
+    else if (strcasecmp (argv [1], "white") == 0)
+      piGlowRing (PIGLOW_WHITE, percent) ;
+    else if (strcasecmp (argv [1], "all") == 0)
+      for (ring = 0 ; ring < 6 ; ++ring)
+	piGlowRing (ring, percent) ;
+    else
+    {
+      fprintf (stderr, "piglow: invalid colour\n") ;
+      exit (EXIT_FAILURE) ;
+    }
+    return 0 ;
+  }
+
+  if (argc == 4)
+  {
+    /**/ if (strcasecmp (argv [1], "leg") == 0)
+    {
+      leg = atoi (argv [2]) ;
+      if ((leg < 0) || (leg > 2))
+      {
+	fprintf (stderr, "piglow: leg value out of range\n") ;
+	exit (EXIT_FAILURE) ;
+      }
+      percent = getPercent (argv [3]) ;
+      piGlowLeg (leg, percent) ;
+    }
+    else if (strcasecmp (argv [1], "ring") == 0)
+    {
+      ring = atoi (argv [2]) ;
+      if ((ring < 0) || (ring > 5))
+      {
+	fprintf (stderr, "piglow: ring value out of range\n") ;
+	exit (EXIT_FAILURE) ;
+      }
+      percent = getPercent (argv [3]) ;
+      piGlowRing (ring, percent) ;
+    }
+    return 0 ;
+  }
+
+  if (argc == 5)
+  {
+    if (strcasecmp (argv [1], "led") != 0)
+      failUsage () ;
+
+    leg = atoi (argv [2]) ;
+    if ((leg < 0) || (leg > 2))
+    {
+      fprintf (stderr, "piglow: leg value out of range\n") ;
+      exit (EXIT_FAILURE) ;
+    }
+    ring = atoi (argv [3]) ;
+    if ((ring < 0) || (ring > 5))
+    {
+      fprintf (stderr, "piglow: ring value out of range\n") ;
+      exit (EXIT_FAILURE) ;
+    }
+    percent = getPercent (argv [4]) ;
+    piGlow1 (leg, ring, percent) ;
+    return 0 ;
+  }
+
+  failUsage () ;
+  return 0 ; 
+}
+
+

data/ext/wiringpi/WiringPi/examples/blink-thread.c

@@ -0,0 +1,61 @@
+/*
+ * blink-thread.c:
+ *	Standard "blink" program in wiringPi. Blinks an LED connected
+ *	to the first GPIO pin.
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <wiringPi.h>
+
+// LED Pin - wiringPi pin 0 is BCM_GPIO 17.
+
+#define	LED	0
+
+PI_THREAD (blinky)
+{
+  for (;;)
+  {
+    digitalWrite (LED, HIGH) ;	// On
+    delay (500) ;		// mS
+    digitalWrite (LED, LOW) ;	// Off
+    delay (500) ;
+  }
+}
+
+
+int main (void)
+{
+  printf ("Raspberry Pi blink\n") ;
+
+  wiringPiSetup () ;
+  pinMode (LED, OUTPUT) ;
+
+  piThreadCreate (blinky) ;
+
+  for (;;)
+  {
+    printf ("Hello, world\n") ;
+    delay (600) ;
+  }
+
+  return 0 ;
+}

data/ext/wiringpi/WiringPi/examples/blink.c

@@ -0,0 +1,48 @@
+/*
+ * blink.c:
+ *	Standard "blink" program in wiringPi. Blinks an LED connected
+ *	to the first GPIO pin.
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <wiringPi.h>
+
+// LED Pin - wiringPi pin 0 is BCM_GPIO 17.
+
+#define	LED	0
+
+int main (void)
+{
+  printf ("Raspberry Pi blink\n") ;
+
+  wiringPiSetup () ;
+  pinMode (LED, OUTPUT) ;
+
+  for (;;)
+  {
+    digitalWrite (LED, HIGH) ;	// On
+    delay (500) ;		// mS
+    digitalWrite (LED, LOW) ;	// Off
+    delay (500) ;
+  }
+  return 0 ;
+}

data/ext/wiringpi/WiringPi/examples/blink12.c

@@ -0,0 +1,111 @@
+/*
+ * blink12.c:
+ *	Simple sequence over the first 12 GPIO pins - LEDs
+ *	Aimed at the Gertboard, but it's fairly generic.
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <wiringPi.h>
+
+// Simple sequencer data
+//	Triplets of LED, On/Off and delay
+
+int data [] =
+{
+            0, 1, 1,
+            1, 1, 1,
+  0, 0, 0,  2, 1, 1,
+  1, 0, 0,  3, 1, 1,
+  2, 0, 0,  4, 1, 1,
+  3, 0, 0,  5, 1, 1,
+  4, 0, 0,  6, 1, 1,
+  5, 0, 0,  7, 1, 1,
+  6, 0, 0, 11, 1, 1,
+  7, 0, 0, 10, 1, 1,
+ 11, 0, 0, 13, 1, 1,
+ 10, 0, 0, 12, 1, 1,
+ 13, 0, 1,
+ 12, 0, 1,
+
+  0, 0, 1,	// Extra delay
+
+// Back again
+
+           12, 1, 1,
+           13, 1, 1,
+ 12, 0, 0, 10, 1, 1,
+ 13, 0, 0, 11, 1, 1,
+ 10, 0, 0,  7, 1, 1,
+ 11, 0, 0,  6, 1, 1,
+  7, 0, 0,  5, 1, 1,
+  6, 0, 0,  4, 1, 1,
+  5, 0, 0,  3, 1, 1,
+  4, 0, 0,  2, 1, 1,
+  3, 0, 0,  1, 1, 1,
+  2, 0, 0,  0, 1, 1,
+  1, 0, 1,
+  0, 0, 1,
+
+  0, 0, 1,	// Extra delay
+
+  0, 9, 0,	// End marker
+
+} ;
+
+
+int main (void)
+{
+  int pin ;
+  int dataPtr ;
+  int l, s, d ;
+
+  printf ("Raspberry Pi - 12-LED Sequence\n") ;
+  printf ("==============================\n") ;
+  printf ("\n") ;
+  printf ("Connect LEDs up to the first 8 GPIO pins, then pins 11, 10, 13, 12 in\n") ;
+  printf ("    that order, then sit back and watch the show!\n") ;
+
+  wiringPiSetup () ;
+
+  for (pin = 0 ; pin < 14 ; ++pin)
+    pinMode (pin, OUTPUT) ;
+
+  dataPtr = 0 ;
+
+  for (;;)
+  {
+    l = data [dataPtr++] ;	// LED
+    s = data [dataPtr++] ;	// State
+    d = data [dataPtr++] ;	// Duration (10ths)
+
+    if (s == 9)			// 9 -> End Marker
+    {
+      dataPtr = 0 ;
+      continue ;
+    }
+
+    digitalWrite (l, s) ;
+    delay        (d * 100) ;
+  }
+
+  return 0 ;
+}

data/ext/wiringpi/WiringPi/examples/blink12drcs.c

@@ -0,0 +1,125 @@
+/*
+ * blink12drcs.c:
+ *	Simple sequence over the first 12 GPIO pins - LEDs
+ *	Aimed at the Gertboard, but it's fairly generic.
+ *	This version uses DRC totalk to the ATmega on the Gertboard
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <wiringPi.h>
+#include <drcSerial.h>
+
+#define	GERT_BASE	100
+
+static int pinMap [] =
+{
+  0, 1, 2, 3,		// Pi Native
+  GERT_BASE + 2, GERT_BASE + 3, GERT_BASE + 4, GERT_BASE + 5,
+  GERT_BASE + 6, GERT_BASE + 7, GERT_BASE + 8, GERT_BASE + 9,
+} ;
+
+// Simple sequencer data
+//	Triplets of LED, On/Off and delay
+
+
+int data [] =
+{
+               0, 1, 1,
+               1, 1, 1,
+   0, 0, 0,    2, 1, 1,
+   1, 0, 0,    3, 1, 1,
+   2, 0, 0,    4, 1, 1,
+   3, 0, 0,    5, 1, 1,
+   4, 0, 0,    6, 1, 1,
+   5, 0, 0,    7, 1, 1,
+   6, 0, 0,    8, 1, 1,
+   7, 0, 0,    9, 1, 1,
+   8, 0, 0,   10, 1, 1,
+   9, 0, 0,   11, 1, 1,
+  10, 0, 1,
+  11, 0, 1,
+
+  0, 0, 1,	// Extra delay
+
+// Back again
+
+              11, 1, 1,
+              10, 1, 1,
+  11, 0, 0,    9, 1, 1,
+  10, 0, 0,    8, 1, 1,
+   9, 0, 0,    7, 1, 1,
+   8, 0, 0,    6, 1, 1,
+   7, 0, 0,    5, 1, 1,
+   6, 0, 0,    4, 1, 1,
+   5, 0, 0,    3, 1, 1,
+   4, 0, 0,    2, 1, 1,
+   3, 0, 0,    1, 1, 1,
+   2, 0, 0,    0, 1, 1,
+   1, 0, 1,
+   0, 0, 1,
+
+   0, 0, 1,	// Extra delay
+
+   0, 9, 0,	// End marker
+
+} ;
+
+
+int main (void)
+{
+  int pin ;
+  int dataPtr ;
+  int l, s, d ;
+
+  printf ("Raspberry Pi - 12-LED Sequence\n") ;
+  printf ("==============================\n") ;
+  printf ("\n") ;
+  printf ("Connect LEDs up to the first 4 Pi pins and 8 pins on the ATmega\n") ;
+  printf ("    from PD2 through PB1 in that order,\n") ;
+  printf ("  then sit back and watch the show!\n") ;
+
+  wiringPiSetup  () ;
+  drcSetupSerial (GERT_BASE, 20, "/dev/ttyAMA0", 115200) ;
+
+  for (pin = 0 ; pin < 12 ; ++pin)
+    pinMode (pinMap [pin], OUTPUT) ;
+
+  dataPtr = 0 ;
+
+  for (;;)
+  {
+    l = data [dataPtr++] ;	// LED
+    s = data [dataPtr++] ;	// State
+    d = data [dataPtr++] ;	// Duration (10ths)
+
+    if (s == 9)			// 9 -> End Marker
+    {
+      dataPtr = 0 ;
+      continue ;
+    }
+
+    digitalWrite (pinMap [l], s) ;
+    delay        (d * analogRead (GERT_BASE) / 4) ;
+  }
+
+  return 0 ;
+}