vsphere-automation-appliance 0.1.0 → 0.2.0

data/docs/ShutdownApi.md

@@ -19,6 +19,13 @@ Cancel pending shutdown action.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::ShutdownApi.new
 
@@ -39,12 +46,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -57,6 +64,13 @@ Get details about the pending shutdown action.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::ShutdownApi.new
 
@@ -78,17 +92,17 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **poweroff**
-> poweroff(appliance_shutdown_poweroff)
+> poweroff(request_body)
 
 Power off the appliance.
 
@@ -96,13 +110,20 @@ Power off the appliance.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::ShutdownApi.new
-appliance_shutdown_poweroff = VSphereAutomation::ApplianceShutdownPoweroff.new # ApplianceShutdownPoweroff | 
+request_body = Appliance::ApplianceShutdownPoweroff.new # ApplianceShutdownPoweroff | 
 
 begin
   #Power off the appliance.
-  api_instance.poweroff(appliance_shutdown_poweroff)
+  api_instance.poweroff(request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling ShutdownApi->poweroff: #{e}"
 end
@@ -112,7 +133,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_shutdown_poweroff** | [**ApplianceShutdownPoweroff**](ApplianceShutdownPoweroff.md)|  | 
+ **request_body** | [**ApplianceShutdownPoweroff**](ApplianceShutdownPoweroff.md)|  | 
 
 ### Return type
 
@@ -120,17 +141,17 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **reboot**
-> reboot(appliance_shutdown_reboot)
+> reboot(request_body)
 
 Reboot the appliance.
 
@@ -138,13 +159,20 @@ Reboot the appliance.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::ShutdownApi.new
-appliance_shutdown_reboot = VSphereAutomation::ApplianceShutdownReboot.new # ApplianceShutdownReboot | 
+request_body = Appliance::ApplianceShutdownReboot.new # ApplianceShutdownReboot | 
 
 begin
   #Reboot the appliance.
-  api_instance.reboot(appliance_shutdown_reboot)
+  api_instance.reboot(request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling ShutdownApi->reboot: #{e}"
 end
@@ -154,7 +182,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_shutdown_reboot** | [**ApplianceShutdownReboot**](ApplianceShutdownReboot.md)|  | 
+ **request_body** | [**ApplianceShutdownReboot**](ApplianceShutdownReboot.md)|  | 
 
 ### Return type
 
@@ -162,12 +190,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/SystemStorageApi.md

@@ -6,7 +6,7 @@ Method | HTTP request | Description
 ------------- | ------------- | -------------
 [**list**](SystemStorageApi.md#list) | **GET** /appliance/system/storage | Get disk to partition mapping.
 [**resize**](SystemStorageApi.md#resize) | **POST** /appliance/system/storage/resize | Resize all partitions to 100 percent of disk size.
-[**resize_ex**](SystemStorageApi.md#resize_ex) | **POST** /appliance/system/storage?action=resize-ex | Resize all partitions to 100 percent of disk size.
+[**resize_ex**](SystemStorageApi.md#resize_ex) | **POST** /appliance/system/storage | Resize all partitions to 100 percent of disk size.
 
 
 # **list**
@@ -18,6 +18,13 @@ Get disk to partition mapping.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemStorageApi.new
 
@@ -39,12 +46,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -57,6 +64,13 @@ Resize all partitions to 100 percent of disk size.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemStorageApi.new
 
@@ -77,17 +91,17 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **resize_ex**
-> ApplianceSystemStorageResizeExResult resize_ex
+> ApplianceSystemStorageResizeExResult resize_ex(action)
 
 Resize all partitions to 100 percent of disk size.
 
@@ -95,12 +109,20 @@ Resize all partitions to 100 percent of disk size.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemStorageApi.new
+action = 'action_example' # String | action=resize-ex
 
 begin
   #Resize all partitions to 100 percent of disk size.
-  result = api_instance.resize_ex
+  result = api_instance.resize_ex(action)
   p result
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling SystemStorageApi->resize_ex: #{e}"
@@ -108,7 +130,10 @@ end
 ```
 
 ### Parameters
-This endpoint does not need any parameter.
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **action** | **String**| action=resize-ex | 
 
 ### Return type
 
@@ -116,12 +141,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/SystemTimeApi.md

@@ -16,6 +16,13 @@ Get system time.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemTimeApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/SystemTimeTimezoneApi.md

@@ -17,6 +17,13 @@ Get time zone.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemTimeTimezoneApi.new
 
@@ -38,17 +45,17 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **set**
-> set(appliance_system_time_timezone_set)
+> set(request_body)
 
 Set time zone.
 
@@ -56,13 +63,20 @@ Set time zone.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemTimeTimezoneApi.new
-appliance_system_time_timezone_set = VSphereAutomation::ApplianceSystemTimeTimezoneSet.new # ApplianceSystemTimeTimezoneSet | 
+request_body = Appliance::ApplianceSystemTimeTimezoneSet.new # ApplianceSystemTimeTimezoneSet | 
 
 begin
   #Set time zone.
-  api_instance.set(appliance_system_time_timezone_set)
+  api_instance.set(request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling SystemTimeTimezoneApi->set: #{e}"
 end
@@ -72,7 +86,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_system_time_timezone_set** | [**ApplianceSystemTimeTimezoneSet**](ApplianceSystemTimeTimezoneSet.md)|  | 
+ **request_body** | [**ApplianceSystemTimeTimezoneSet**](ApplianceSystemTimeTimezoneSet.md)|  | 
 
 ### Return type
 
@@ -80,12 +94,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/SystemUptimeApi.md

@@ -16,6 +16,13 @@ Get the system uptime.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemUptimeApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/SystemVersionApi.md

@@ -16,6 +16,13 @@ Get the version.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::SystemVersionApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/TechpreviewMonitoringSnmpApi.md

@@ -24,6 +24,13 @@ Stop an enabled SNMP agent.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
 
@@ -44,12 +51,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -62,6 +69,13 @@ Start a disabled SNMP agent.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
 
@@ -82,12 +96,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -100,6 +114,13 @@ Return an SNMP agent configuration.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
 
@@ -121,17 +142,17 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **hash**
-> ApplianceTechpreviewMonitoringSnmpHashResult hash(appliance_techpreview_monitoring_snmp_hash)
+> ApplianceTechpreviewMonitoringSnmpHashResult hash(request_body)
 
 Generate localized keys for secure SNMPv3 communications.
 
@@ -139,13 +160,20 @@ Generate localized keys for secure SNMPv3 communications.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
-appliance_techpreview_monitoring_snmp_hash = VSphereAutomation::ApplianceTechpreviewMonitoringSnmpHash.new # ApplianceTechpreviewMonitoringSnmpHash | 
+request_body = Appliance::ApplianceTechpreviewMonitoringSnmpHash.new # ApplianceTechpreviewMonitoringSnmpHash | 
 
 begin
   #Generate localized keys for secure SNMPv3 communications.
-  result = api_instance.hash(appliance_techpreview_monitoring_snmp_hash)
+  result = api_instance.hash(request_body)
   p result
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling TechpreviewMonitoringSnmpApi->hash: #{e}"
@@ -156,7 +184,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_techpreview_monitoring_snmp_hash** | [**ApplianceTechpreviewMonitoringSnmpHash**](ApplianceTechpreviewMonitoringSnmpHash.md)|  | 
+ **request_body** | [**ApplianceTechpreviewMonitoringSnmpHash**](ApplianceTechpreviewMonitoringSnmpHash.md)|  | 
 
 ### Return type
 
@@ -164,12 +192,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -182,6 +210,13 @@ Get SNMP limits information.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
 
@@ -203,12 +238,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -221,6 +256,13 @@ Restore settings to factory defaults.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
 
@@ -241,17 +283,17 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **set**
-> set(appliance_techpreview_monitoring_snmp_set)
+> set(request_body)
 
 Set SNMP configuration.
 
@@ -259,13 +301,20 @@ Set SNMP configuration.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
-appliance_techpreview_monitoring_snmp_set = VSphereAutomation::ApplianceTechpreviewMonitoringSnmpSet.new # ApplianceTechpreviewMonitoringSnmpSet | 
+request_body = Appliance::ApplianceTechpreviewMonitoringSnmpSet.new # ApplianceTechpreviewMonitoringSnmpSet | 
 
 begin
   #Set SNMP configuration.
-  api_instance.set(appliance_techpreview_monitoring_snmp_set)
+  api_instance.set(request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling TechpreviewMonitoringSnmpApi->set: #{e}"
 end
@@ -275,7 +324,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_techpreview_monitoring_snmp_set** | [**ApplianceTechpreviewMonitoringSnmpSet**](ApplianceTechpreviewMonitoringSnmpSet.md)|  | 
+ **request_body** | [**ApplianceTechpreviewMonitoringSnmpSet**](ApplianceTechpreviewMonitoringSnmpSet.md)|  | 
 
 ### Return type
 
@@ -283,12 +332,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -301,6 +350,13 @@ Generate diagnostics report for snmp agent.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
 
@@ -322,12 +378,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -340,6 +396,13 @@ Send a warmStart notification to all configured traps and inform destinations (s
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::TechpreviewMonitoringSnmpApi.new
 
@@ -361,12 +424,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json