vsphere-automation-appliance 0.1.0 → 0.2.0

data/docs/AccessSshApi.md

@@ -17,6 +17,13 @@ Get enabled state of the SSH-based controlled CLI.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::AccessSshApi.new
 
@@ -38,17 +45,17 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **set**
-> set(appliance_access_ssh_set)
+> set(request_body)
 
 Set enabled state of the SSH-based controlled CLI.
 
@@ -56,13 +63,20 @@ Set enabled state of the SSH-based controlled CLI.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::AccessSshApi.new
-appliance_access_ssh_set = VSphereAutomation::ApplianceAccessSshSet.new # ApplianceAccessSshSet | 
+request_body = Appliance::ApplianceAccessSshSet.new # ApplianceAccessSshSet | 
 
 begin
   #Set enabled state of the SSH-based controlled CLI.
-  api_instance.set(appliance_access_ssh_set)
+  api_instance.set(request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling AccessSshApi->set: #{e}"
 end
@@ -72,7 +86,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_access_ssh_set** | [**ApplianceAccessSshSet**](ApplianceAccessSshSet.md)|  | 
+ **request_body** | [**ApplianceAccessSshSet**](ApplianceAccessSshSet.md)|  | 
 
 ### Return type
 
@@ -80,12 +94,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/ApplianceAccessConsolecliResult.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | **BOOLEAN** |  | 
+**value** | **Boolean** |  | 
 
 

data/docs/ApplianceAccessConsolecliSet.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**enabled** | **BOOLEAN** | Console-based controlled CLI is enabled. | 
+**enabled** | **Boolean** | Console-based controlled CLI is enabled. | 
 
 

data/docs/ApplianceAccessDcuiResult.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | **BOOLEAN** |  | 
+**value** | **Boolean** |  | 
 
 

data/docs/ApplianceAccessDcuiSet.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**enabled** | **BOOLEAN** | DCUI is enabled. | 
+**enabled** | **Boolean** | DCUI is enabled. | 
 
 

data/docs/ApplianceAccessShellShellConfig.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**enabled** | **BOOLEAN** | Enabled can be set to true or false | 
+**enabled** | **Boolean** | Enabled can be set to true or false | 
 **timeout** | **Integer** | The timeout (in seconds) specifies how long you enable the Shell access. The maximum timeout is 86400 seconds(1 day). | 
 
 

data/docs/ApplianceAccessSshResult.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | **BOOLEAN** |  | 
+**value** | **Boolean** |  | 
 
 

data/docs/ApplianceAccessSshSet.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**enabled** | **BOOLEAN** | SSH-based controlled CLI is enabled. | 
+**enabled** | **Boolean** | SSH-based controlled CLI is enabled. | 
 
 

data/docs/ApplianceLocalAccountsConfig.md

@@ -8,10 +8,10 @@ Name | Type | Description | Notes
 **full_name** | **String** | Full name of the user | [optional] 
 **email** | **String** | Email address of the local account | [optional] 
 **roles** | **Array<String>** | User roles | 
-**enabled** | **BOOLEAN** | Flag indicating if the account is enabled | [optional] 
-**password_expires** | **BOOLEAN** | Flag indicating if the account password expires | [optional] 
+**enabled** | **Boolean** | Flag indicating if the account is enabled | [optional] 
+**password_expires** | **Boolean** | Flag indicating if the account password expires | [optional] 
 **password_expires_at** | **DateTime** | Date when the account's password will expire | [optional] 
-**inactive_after_password_expiration** | **BOOLEAN** | Flag indicating if the account will be locked after password expiration | [optional] 
+**inactive_after_password_expiration** | **Boolean** | Flag indicating if the account will be locked after password expiration | [optional] 
 **days_after_password_expiration** | **Integer** | Number of days after password expiration before the account will be locked | [optional] 
 **min_days_between_password_change** | **Integer** | Minimum number of days between password change | [optional] 
 **max_days_between_password_change** | **Integer** | Maximum number of days between password change | [optional] 

data/docs/ApplianceLocalAccountsInfo.md

@@ -6,8 +6,8 @@ Name | Type | Description | Notes
 **fullname** | **String** | Full name of the user | [optional] 
 **email** | **String** | Email address of the local account | [optional] 
 **roles** | **Array<String>** | User roles | 
-**enabled** | **BOOLEAN** | Flag indicating if the account is enabled | 
-**has_password** | **BOOLEAN** | Is the user password set. | 
+**enabled** | **Boolean** | Flag indicating if the account is enabled | 
+**has_password** | **Boolean** | Is the user password set. | 
 **last_password_change** | **DateTime** | Date and time password was changed. | [optional] 
 **password_expires_at** | **DateTime** | Date when the account's password will expire | [optional] 
 **inactive_at** | **DateTime** | Date and time account will be locked after password expiration. | [optional] 

data/docs/ApplianceLocalAccountsUpdateConfig.md

@@ -8,10 +8,10 @@ Name | Type | Description | Notes
 **full_name** | **String** | Full name of the user | [optional] 
 **email** | **String** | Email address of the local account | [optional] 
 **roles** | **Array<String>** | User roles | [optional] 
-**enabled** | **BOOLEAN** | Flag indicating if the account is enabled | [optional] 
-**password_expires** | **BOOLEAN** | Flag indicating if the account password expires | [optional] 
+**enabled** | **Boolean** | Flag indicating if the account is enabled | [optional] 
+**password_expires** | **Boolean** | Flag indicating if the account password expires | [optional] 
 **password_expires_at** | **DateTime** | Date when the account's password will expire | [optional] 
-**inactive_after_password_expiration** | **BOOLEAN** | Flag indicating if the account will be locked after password expiration | [optional] 
+**inactive_after_password_expiration** | **Boolean** | Flag indicating if the account will be locked after password expiration | [optional] 
 **days_after_password_expiration** | **Integer** | Number of days after password expiration before the account will be locked | [optional] 
 **min_days_between_password_change** | **Integer** | Minimum number of days between password change | [optional] 
 **max_days_between_password_change** | **Integer** | Maximum number of days between password change | [optional] 

data/docs/ApplianceLoggingForwardingTest.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**send_test_message** | **BOOLEAN** | Flag specifying whether a default test message should be sent to the configured logging servers. | [optional] 
+**send_test_message** | **Boolean** | Flag specifying whether a default test message should be sent to the configured logging servers. | [optional] 
 
 

data/docs/ApplianceNetworkingInfoInterfaces.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceNetworkingInterfacesInterfaceInfo**](ApplianceNetworkingInterfacesInterfaceInfo.md) |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | [**ApplianceNetworkingInterfacesInterfaceInfo**](ApplianceNetworkingInterfacesInterfaceInfo.md) |  | [optional] 
 
 

data/docs/ApplianceNetworkingInterfacesIpv4Info.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**configurable** | **BOOLEAN** | The specified network interface is configurable or not. | 
+**configurable** | **Boolean** | The specified network interface is configurable or not. | 
 **mode** | [**ApplianceNetworkingInterfacesIpv4Mode**](ApplianceNetworkingInterfacesIpv4Mode.md) |  | 
 **address** | **String** | The IPv4 address, for example, \"10.20.80.191\". | [optional] 
 **prefix** | **Integer** | The IPv4 CIDR prefix, for example, 24.  See http://www.oav.net/mirrors/cidr.html for netmask-to-prefix conversion. | [optional] 

data/docs/ApplianceNetworkingInterfacesIpv6Config.md

@@ -3,8 +3,8 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**dhcp** | **BOOLEAN** | An address will be assigned by a DHCP server. | 
-**autoconf** | **BOOLEAN** | An address will be assigned by Stateless Address Autoconfiguration (SLAAC). | 
+**dhcp** | **Boolean** | An address will be assigned by a DHCP server. | 
+**autoconf** | **Boolean** | An address will be assigned by Stateless Address Autoconfiguration (SLAAC). | 
 **addresses** | [**Array<ApplianceNetworkingInterfacesIpv6Address>**](ApplianceNetworkingInterfacesIpv6Address.md) | The list of addresses to be statically assigned. | 
 **default_gateway** | **String** | The default gateway for static IP address assignment. This configures the global IPv6 default gateway on the appliance with the specified gateway address and interface. This gateway replaces the existing default gateway configured on the appliance. However, if the gateway address is link-local, then it is added for that interface. This does not support configuration of multiple global default gateways through different interfaces. | 
 

data/docs/ApplianceNetworkingInterfacesIpv6Info.md

@@ -3,10 +3,10 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**dhcp** | **BOOLEAN** | DHCP is on. | 
-**autoconf** | **BOOLEAN** | Stateless Address Autoconfiguration (SLAAC) is on. | 
+**dhcp** | **Boolean** | DHCP is on. | 
+**autoconf** | **Boolean** | Stateless Address Autoconfiguration (SLAAC) is on. | 
 **addresses** | [**Array<ApplianceNetworkingInterfacesIpv6AddressInfo>**](ApplianceNetworkingInterfacesIpv6AddressInfo.md) | List of addresses with their origins and statuses. | 
 **default_gateway** | **String** | The default gateway for static IP address assignment. This configures the global IPv6 default gateway on the appliance with the specified gateway address and interface. This gateway replaces the existing default gateway configured on the appliance. However, if the gateway address is link-local, then it is added for that interface. This does not support configuration of multiple global default gateways through different interfaces. | 
-**configurable** | **BOOLEAN** | Is NIC configurable or not. | 
+**configurable** | **Boolean** | Is NIC configurable or not. | 
 
 

data/docs/ApplianceNetworkingProxyConfig.md

@@ -7,6 +7,6 @@ Name | Type | Description | Notes
 **port** | **Integer** | Port to connect to the proxy server. In a 'get' call, indicates the port connected to the proxy server. In a 'set' call, specifies the port to connect to the proxy server. A value of -1 indicates the default port. | 
 **username** | **String** | Username for proxy server. | [optional] 
 **password** | **String** | Password for proxy server. | [optional] 
-**enabled** | **BOOLEAN** | In the result of the {@name #get} and {@name #list} {@term operations} this {@term field} indicates whether proxying is enabled for a particular protocol. In the input to the {@name test} and {@name set} {@term operations} this {@term field} specifies whether proxying should be enabled for a particular protocol. | 
+**enabled** | **Boolean** | In the result of the {@name #get} and {@name #list} {@term operations} this {@term field} indicates whether proxying is enabled for a particular protocol. In the input to the {@name test} and {@name set} {@term operations} this {@term field} specifies whether proxying should be enabled for a particular protocol. | 
 
 

data/docs/ApplianceNetworkingProxyListResultValue.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceNetworkingProxyConfig**](ApplianceNetworkingProxyConfig.md) |  | [optional] 
 **key** | [**ApplianceNetworkingProxyProtocol**](ApplianceNetworkingProxyProtocol.md) |  | [optional] 
+**value** | [**ApplianceNetworkingProxyConfig**](ApplianceNetworkingProxyConfig.md) |  | [optional] 
 
 

data/docs/ApplianceNetworkingUpdateSpec.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**ipv6_enabled** | **BOOLEAN** | IPv6 Enabled or not | [optional] 
+**ipv6_enabled** | **Boolean** | IPv6 Enabled or not | [optional] 
 
 

data/docs/ApplianceRecoveryBackupJobDetailsBuildInfo.md

@@ -0,0 +1,10 @@
+# VSphereAutomation::Appliance::ApplianceRecoveryBackupJobDetailsBuildInfo
+
+## Properties
+Name | Type | Description | Notes
+------------ | ------------- | ------------- | -------------
+**version_name** | **String** | Appliance product type, for example 6.8.2 GA | 
+**version** | **String** | Appliance version, for example 6.8.2.10000 | 
+**build_number** | **String** | Build Number of the appliance | 
+
+

data/docs/ApplianceRecoveryBackupJobDetailsInfo.md

@@ -10,13 +10,14 @@ Name | Type | Description | Notes
 **location_user** | **String** | The username for the remote backup location. | 
 **type** | [**ApplianceRecoveryBackupJobDetailsType**](ApplianceRecoveryBackupJobDetailsType.md) |  | 
 **messages** | [**Array<VapiStdLocalizableMessage>**](VapiStdLocalizableMessage.md) | List of any info/warning/error messages returned by the backup job. | 
+**build** | [**ApplianceRecoveryBackupJobDetailsBuildInfo**](ApplianceRecoveryBackupJobDetailsBuildInfo.md) |  | [optional] 
 **description** | [**VapiStdLocalizableMessage**](VapiStdLocalizableMessage.md) |  | 
 **service** | **String** | Identifier of the service containing the operation. | 
 **operation** | **String** | Identifier of the operation associated with the task. | 
 **parent** | **String** | Parent of the current task. | [optional] 
 **target** | [**VapiStdDynamicID**](VapiStdDynamicID.md) |  | [optional] 
 **status** | [**CisTaskStatus**](CisTaskStatus.md) |  | 
-**cancelable** | **BOOLEAN** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | 
+**cancelable** | **Boolean** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | 
 **error** | **String** | Description of the error if the operation status is \"FAILED\". | [optional] 
 **start_time** | **DateTime** | Time when the operation is started. | [optional] 
 **end_time** | **DateTime** | Time when the operation is completed. | [optional] 

data/docs/ApplianceRecoveryBackupJobDetailsListResultValue.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceRecoveryBackupJobDetailsInfo**](ApplianceRecoveryBackupJobDetailsInfo.md) |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | [**ApplianceRecoveryBackupJobDetailsInfo**](ApplianceRecoveryBackupJobDetailsInfo.md) |  | [optional] 
 
 

data/docs/ApplianceRecoveryBackupPartsPart.md

@@ -6,7 +6,7 @@ Name | Type | Description | Notes
 **id** | **String** | part ID | 
 **name** | [**ApplianceRecoveryBackupPartsLocalizableMessage**](ApplianceRecoveryBackupPartsLocalizableMessage.md) |  | 
 **description** | [**ApplianceRecoveryBackupPartsLocalizableMessage**](ApplianceRecoveryBackupPartsLocalizableMessage.md) |  | 
-**selected_by_default** | **BOOLEAN** | Is this part selected by default in the user interface. | 
-**optional** | **BOOLEAN** | Is this part optional. | 
+**selected_by_default** | **Boolean** | Is this part selected by default in the user interface. | 
+**optional** | **Boolean** | Is this part optional. | 
 
 

data/docs/ApplianceRecoveryBackupSchedulesCreateSpec.md

@@ -8,7 +8,7 @@ Name | Type | Description | Notes
 **location** | **String** | URL of the backup location. | 
 **location_user** | **String** | Username for the given location. | [optional] 
 **location_password** | **String** | Password for the given location. | [optional] 
-**enable** | **BOOLEAN** | Enable or disable a schedule. | [optional] 
+**enable** | **Boolean** | Enable or disable a schedule. | [optional] 
 **recurrence_info** | [**ApplianceRecoveryBackupSchedulesRecurrenceInfo**](ApplianceRecoveryBackupSchedulesRecurrenceInfo.md) |  | [optional] 
 **retention_info** | [**ApplianceRecoveryBackupSchedulesRetentionInfo**](ApplianceRecoveryBackupSchedulesRetentionInfo.md) |  | [optional] 
 

data/docs/ApplianceRecoveryBackupSchedulesInfo.md

@@ -6,7 +6,7 @@ Name | Type | Description | Notes
 **parts** | **Array<String>** | List of optional parts that will be included in backups based on this schedule details. Use the {@link appliance.recovery.backup.Parts#list} {@term operation} to get information about the supported parts. | 
 **location** | **String** | URL of the backup location. | 
 **location_user** | **String** | Username for the given location. | [optional] 
-**enable** | **BOOLEAN** | Enable or disable a schedule, by default when created a schedule will be enabled. | 
+**enable** | **Boolean** | Enable or disable a schedule, by default when created a schedule will be enabled. | 
 **recurrence_info** | [**ApplianceRecoveryBackupSchedulesRecurrenceInfo**](ApplianceRecoveryBackupSchedulesRecurrenceInfo.md) |  | [optional] 
 **retention_info** | [**ApplianceRecoveryBackupSchedulesRetentionInfo**](ApplianceRecoveryBackupSchedulesRetentionInfo.md) |  | [optional] 
 

data/docs/ApplianceRecoveryBackupSchedulesListResultValue.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceRecoveryBackupSchedulesInfo**](ApplianceRecoveryBackupSchedulesInfo.md) |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | [**ApplianceRecoveryBackupSchedulesInfo**](ApplianceRecoveryBackupSchedulesInfo.md) |  | [optional] 
 
 

data/docs/ApplianceRecoveryBackupSchedulesUpdateSpec.md

@@ -8,7 +8,7 @@ Name | Type | Description | Notes
 **location** | **String** | URL of the backup location. | [optional] 
 **location_user** | **String** | Username for the given location. | [optional] 
 **location_password** | **String** | Password for the given location. | [optional] 
-**enable** | **BOOLEAN** | Enable or disable a schedule. | [optional] 
+**enable** | **Boolean** | Enable or disable a schedule. | [optional] 
 **recurrence_info** | [**ApplianceRecoveryBackupSchedulesRecurrenceInfo**](ApplianceRecoveryBackupSchedulesRecurrenceInfo.md) |  | [optional] 
 **retention_info** | [**ApplianceRecoveryBackupSchedulesRetentionInfo**](ApplianceRecoveryBackupSchedulesRetentionInfo.md) |  | [optional] 
 

data/docs/ApplianceRecoveryInfo.md

@@ -3,6 +3,6 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**supported** | **BOOLEAN** | Is recovery supported in this appliance. | 
+**supported** | **Boolean** | Is recovery supported in this appliance. | 
 
 

data/docs/ApplianceRecoveryReconciliationJobCreateSpec.md

@@ -5,6 +5,6 @@ Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **sso_admin_user_name** | **String** | Administrators username for SSO. | [optional] 
 **sso_admin_user_password** | **String** | Password for SSO admin user. | [optional] 
-**ignore_warnings** | **BOOLEAN** | Flag indicating whether warnings should be ignored during reconciliation. | [optional] 
+**ignore_warnings** | **Boolean** | Flag indicating whether warnings should be ignored during reconciliation. | [optional] 
 
 

data/docs/ApplianceRecoveryReconciliationJobInfo.md

@@ -9,7 +9,7 @@ Name | Type | Description | Notes
 **parent** | **String** | Parent of the current task. | [optional] 
 **target** | [**VapiStdDynamicID**](VapiStdDynamicID.md) |  | [optional] 
 **status** | [**ApplianceRecoveryReconciliationJobStatus**](ApplianceRecoveryReconciliationJobStatus.md) |  | 
-**cancelable** | **BOOLEAN** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | [optional] 
+**cancelable** | **Boolean** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | [optional] 
 **error** | **String** | Description of the error if the operation status is \"FAILED\". | [optional] 
 **start_time** | **DateTime** | Time when the operation is started. | [optional] 
 **end_time** | **DateTime** | Time when the operation is completed. | [optional] 

data/docs/ApplianceRecoveryRestoreJobRestoreRequest.md

@@ -10,6 +10,6 @@ Name | Type | Description | Notes
 **location_password** | **String** | password for location | [optional] 
 **sso_admin_user_name** | **String** | Administrators Username for SSO. | [optional] 
 **sso_admin_user_password** | **String** | The password for SSO admin user. | [optional] 
-**ignore_warnings** | **BOOLEAN** | The flag to ignore warnings during restore | [optional] 
+**ignore_warnings** | **Boolean** | The flag to ignore warnings during restore | [optional] 
 
 

data/docs/ApplianceRecoveryRestoreMetadata.md

@@ -7,9 +7,9 @@ Name | Type | Description | Notes
 **parts** | **Array<String>** | List of parts included in the backup. | 
 **version** | **String** | VCSA version | 
 **boxname** | **String** | Box name is PNID/ FQDN etc | 
-**sso_login_required** | **BOOLEAN** | Is SSO login required for the vCenter server. | [optional] 
+**sso_login_required** | **Boolean** | Is SSO login required for the vCenter server. | [optional] 
 **comment** | **String** | Custom comment | 
-**applicable** | **BOOLEAN** | Does the VCSA match the deployment type, network properties            and version of backed up VC | 
+**applicable** | **Boolean** | Does the VCSA match the deployment type, network properties            and version of backed up VC | 
 **messages** | [**Array<ApplianceRecoveryRestoreLocalizableMessage>**](ApplianceRecoveryRestoreLocalizableMessage.md) | Any messages if the backup is not aplicable | 
 
 

data/docs/ApplianceServicesListResultValue.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceServicesInfo**](ApplianceServicesInfo.md) |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | [**ApplianceServicesInfo**](ApplianceServicesInfo.md) |  | [optional] 
 
 

data/docs/ApplianceSubtaskInfo.md

@@ -11,7 +11,7 @@ Name | Type | Description | Notes
 **parent** | **String** | Parent of the current task. | [optional] 
 **target** | [**VapiStdDynamicID**](VapiStdDynamicID.md) |  | [optional] 
 **status** | [**CisTaskStatus**](CisTaskStatus.md) |  | 
-**cancelable** | **BOOLEAN** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | 
+**cancelable** | **Boolean** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | 
 **error** | **String** | Description of the error if the operation status is \"FAILED\". | [optional] 
 **start_time** | **DateTime** | Time when the operation is started. | [optional] 
 **end_time** | **DateTime** | Time when the operation is completed. | [optional] 

data/docs/ApplianceSystemStorageResizeExResultValue.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceSystemStorageStorageChange**](ApplianceSystemStorageStorageChange.md) |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | [**ApplianceSystemStorageStorageChange**](ApplianceSystemStorageStorageChange.md) |  | [optional]