vsphere-automation-appliance 0.1.0 → 0.2.0

data/docs/NtpApi.md

@@ -18,6 +18,13 @@ Get the NTP configuration status. If you run the 'timesync.get' command, you can
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::NtpApi.new
 
@@ -39,17 +46,17 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **set**
-> set(appliance_ntp_set)
+> set(request_body)
 
 Set NTP servers. This method updates old NTP servers from configuration and sets the input NTP servers in the configuration. If NTP based time synchronization is used internally, the NTP daemon will be restarted to reload given NTP configuration. In case NTP based time synchronization is not used, this method only replaces servers in the NTP configuration.
 
@@ -57,13 +64,20 @@ Set NTP servers. This method updates old NTP servers from configuration and sets
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::NtpApi.new
-appliance_ntp_set = VSphereAutomation::ApplianceNtpSet.new # ApplianceNtpSet | 
+request_body = Appliance::ApplianceNtpSet.new # ApplianceNtpSet | 
 
 begin
   #Set NTP servers. This method updates old NTP servers from configuration and sets the input NTP servers in the configuration. If NTP based time synchronization is used internally, the NTP daemon will be restarted to reload given NTP configuration. In case NTP based time synchronization is not used, this method only replaces servers in the NTP configuration.
-  api_instance.set(appliance_ntp_set)
+  api_instance.set(request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling NtpApi->set: #{e}"
 end
@@ -73,7 +87,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_ntp_set** | [**ApplianceNtpSet**](ApplianceNtpSet.md)|  | 
+ **request_body** | [**ApplianceNtpSet**](ApplianceNtpSet.md)|  | 
 
 ### Return type
 
@@ -81,17 +95,17 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **test**
-> ApplianceNtpTestResult test(appliance_ntp_test)
+> ApplianceNtpTestResult test(request_body)
 
 Test the connection to a list of ntp servers.
 
@@ -99,13 +113,20 @@ Test the connection to a list of ntp servers.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::NtpApi.new
-appliance_ntp_test = VSphereAutomation::ApplianceNtpTest.new # ApplianceNtpTest | 
+request_body = Appliance::ApplianceNtpTest.new # ApplianceNtpTest | 
 
 begin
   #Test the connection to a list of ntp servers.
-  result = api_instance.test(appliance_ntp_test)
+  result = api_instance.test(request_body)
   p result
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling NtpApi->test: #{e}"
@@ -116,7 +137,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_ntp_test** | [**ApplianceNtpTest**](ApplianceNtpTest.md)|  | 
+ **request_body** | [**ApplianceNtpTest**](ApplianceNtpTest.md)|  | 
 
 ### Return type
 
@@ -124,12 +145,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/RecoveryApi.md

@@ -16,6 +16,13 @@ Gets the properties of the appliance Recovery subsystem.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/RecoveryBackupApi.md

@@ -8,7 +8,7 @@ Method | HTTP request | Description
 
 
 # **validate**
-> ApplianceRecoveryBackupValidateResult validate(appliance_recovery_backup_validate)
+> ApplianceRecoveryBackupValidateResult validate(request_body)
 
 Check for backup errors without starting backup.
 
@@ -16,13 +16,20 @@ Check for backup errors without starting backup.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupApi.new
-appliance_recovery_backup_validate = VSphereAutomation::ApplianceRecoveryBackupValidate.new # ApplianceRecoveryBackupValidate | 
+request_body = Appliance::ApplianceRecoveryBackupValidate.new # ApplianceRecoveryBackupValidate | 
 
 begin
   #Check for backup errors without starting backup.
-  result = api_instance.validate(appliance_recovery_backup_validate)
+  result = api_instance.validate(request_body)
   p result
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling RecoveryBackupApi->validate: #{e}"
@@ -33,7 +40,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_recovery_backup_validate** | [**ApplianceRecoveryBackupValidate**](ApplianceRecoveryBackupValidate.md)|  | 
+ **request_body** | [**ApplianceRecoveryBackupValidate**](ApplianceRecoveryBackupValidate.md)|  | 
 
 ### Return type
 
@@ -41,12 +48,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/RecoveryBackupJobApi.md

@@ -19,6 +19,13 @@ Cancel the backup job.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupJobApi.new
 id = 'id_example' # String | ID (ID of job)
@@ -44,17 +51,17 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **create**
-> ApplianceRecoveryBackupJobCreateResult create(appliance_recovery_backup_job_create)
+> ApplianceRecoveryBackupJobCreateResult create(request_body)
 
 Initiate backup.
 
@@ -62,13 +69,20 @@ Initiate backup.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupJobApi.new
-appliance_recovery_backup_job_create = VSphereAutomation::ApplianceRecoveryBackupJobCreate.new # ApplianceRecoveryBackupJobCreate | 
+request_body = Appliance::ApplianceRecoveryBackupJobCreate.new # ApplianceRecoveryBackupJobCreate | 
 
 begin
   #Initiate backup.
-  result = api_instance.create(appliance_recovery_backup_job_create)
+  result = api_instance.create(request_body)
   p result
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling RecoveryBackupJobApi->create: #{e}"
@@ -79,7 +93,7 @@ end
 
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
- **appliance_recovery_backup_job_create** | [**ApplianceRecoveryBackupJobCreate**](ApplianceRecoveryBackupJobCreate.md)|  | 
+ **request_body** | [**ApplianceRecoveryBackupJobCreate**](ApplianceRecoveryBackupJobCreate.md)|  | 
 
 ### Return type
 
@@ -87,12 +101,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -105,6 +119,13 @@ See backup job progress/result.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupJobApi.new
 id = 'id_example' # String | ID (ID of job)
@@ -130,12 +151,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -148,6 +169,13 @@ Get list of backup jobs
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupJobApi.new
 
@@ -169,12 +197,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/RecoveryBackupJobDetailsApi.md

@@ -16,6 +16,13 @@ Returns detailed information about the current and historical backup jobs.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupJobDetailsApi.new
 opts = {
@@ -43,12 +50,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/RecoveryBackupPartsApi.md

@@ -17,6 +17,13 @@ Gets the size (in MB) of the part.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupPartsApi.new
 id = 'id_example' # String | Identifier of the part.
@@ -42,12 +49,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -60,6 +67,13 @@ Gets a list of the backup parts.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupPartsApi.new
 
@@ -81,12 +95,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/RecoveryBackupSchedulesApi.md

@@ -13,7 +13,7 @@ Method | HTTP request | Description
 
 
 # **create**
-> create(schedule, appliance_recovery_backup_schedules_create)
+> create(schedule, request_body)
 
 Creates a schedule
 
@@ -21,14 +21,21 @@ Creates a schedule
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupSchedulesApi.new
 schedule = 'schedule_example' # String | Identifier of the schedule
-appliance_recovery_backup_schedules_create = VSphereAutomation::ApplianceRecoveryBackupSchedulesCreate.new # ApplianceRecoveryBackupSchedulesCreate | 
+request_body = Appliance::ApplianceRecoveryBackupSchedulesCreate.new # ApplianceRecoveryBackupSchedulesCreate | 
 
 begin
   #Creates a schedule
-  api_instance.create(schedule, appliance_recovery_backup_schedules_create)
+  api_instance.create(schedule, request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling RecoveryBackupSchedulesApi->create: #{e}"
 end
@@ -39,7 +46,7 @@ end
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
  **schedule** | **String**| Identifier of the schedule | 
- **appliance_recovery_backup_schedules_create** | [**ApplianceRecoveryBackupSchedulesCreate**](ApplianceRecoveryBackupSchedulesCreate.md)|  | 
+ **request_body** | [**ApplianceRecoveryBackupSchedulesCreate**](ApplianceRecoveryBackupSchedulesCreate.md)|  | 
 
 ### Return type
 
@@ -47,12 +54,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -65,6 +72,13 @@ Deletes an existing schedule
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupSchedulesApi.new
 schedule = 'schedule_example' # String | Identifier of the schedule
@@ -89,12 +103,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -107,6 +121,13 @@ Returns an existing schedule information based on id
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupSchedulesApi.new
 schedule = 'schedule_example' # String | Identifier of the schedule
@@ -132,12 +153,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -150,6 +171,13 @@ Returns a list of existing schedules with details
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupSchedulesApi.new
 
@@ -171,12 +199,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -189,11 +217,18 @@ Initiate backup with the specified schedule
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupSchedulesApi.new
 schedule = 'schedule_example' # String | Identifier of the schedule
 opts = {
-  appliance_recovery_backup_schedules_run: VSphereAutomation::ApplianceRecoveryBackupSchedulesRun.new # ApplianceRecoveryBackupSchedulesRun | 
+  request_body: Appliance::ApplianceRecoveryBackupSchedulesRun.new # ApplianceRecoveryBackupSchedulesRun | 
 }
 
 begin
@@ -210,7 +245,7 @@ end
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
  **schedule** | **String**| Identifier of the schedule | 
- **appliance_recovery_backup_schedules_run** | [**ApplianceRecoveryBackupSchedulesRun**](ApplianceRecoveryBackupSchedulesRun.md)|  | [optional] 
+ **request_body** | [**ApplianceRecoveryBackupSchedulesRun**](ApplianceRecoveryBackupSchedulesRun.md)|  | [optional] 
 
 ### Return type
 
@@ -218,17 +253,17 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **update**
-> update(schedule, appliance_recovery_backup_schedules_update)
+> update(schedule, request_body)
 
 Updates a schedule
 
@@ -236,14 +271,21 @@ Updates a schedule
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::RecoveryBackupSchedulesApi.new
 schedule = 'schedule_example' # String | Identifier of the schedule
-appliance_recovery_backup_schedules_update = VSphereAutomation::ApplianceRecoveryBackupSchedulesUpdate.new # ApplianceRecoveryBackupSchedulesUpdate | 
+request_body = Appliance::ApplianceRecoveryBackupSchedulesUpdate.new # ApplianceRecoveryBackupSchedulesUpdate | 
 
 begin
   #Updates a schedule
-  api_instance.update(schedule, appliance_recovery_backup_schedules_update)
+  api_instance.update(schedule, request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling RecoveryBackupSchedulesApi->update: #{e}"
 end
@@ -254,7 +296,7 @@ end
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
  **schedule** | **String**| Identifier of the schedule | 
- **appliance_recovery_backup_schedules_update** | [**ApplianceRecoveryBackupSchedulesUpdate**](ApplianceRecoveryBackupSchedulesUpdate.md)|  | 
+ **request_body** | [**ApplianceRecoveryBackupSchedulesUpdate**](ApplianceRecoveryBackupSchedulesUpdate.md)|  | 
 
 ### Return type
 
@@ -262,12 +304,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json