vsphere-automation-appliance 0.1.0 → 0.2.0

data/docs/ApplianceTaskInfo.md

@@ -12,7 +12,7 @@ Name | Type | Description | Notes
 **parent** | **String** | Parent of the current task. | [optional] 
 **target** | [**VapiStdDynamicID**](VapiStdDynamicID.md) |  | [optional] 
 **status** | [**CisTaskStatus**](CisTaskStatus.md) |  | 
-**cancelable** | **BOOLEAN** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | 
+**cancelable** | **Boolean** | Flag to indicate whether or not the operation can be cancelled. The value may change as the operation progresses. | 
 **error** | **String** | Description of the error if the operation status is \"FAILED\". | [optional] 
 **start_time** | **DateTime** | Time when the operation is started. | [optional] 
 **end_time** | **DateTime** | Time when the operation is completed. | [optional] 

data/docs/ApplianceTaskInfoSubtasks.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceSubtaskInfo**](ApplianceSubtaskInfo.md) |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | [**ApplianceSubtaskInfo**](ApplianceSubtaskInfo.md) |  | [optional] 
 
 

data/docs/ApplianceTechpreviewMonitoringSnmpSNMPConfigReadOnly.md

@@ -5,7 +5,7 @@ Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **authentication** | [**ApplianceTechpreviewMonitoringSnmpSNMPAuthProto**](ApplianceTechpreviewMonitoringSnmpSNMPAuthProto.md) |  | 
 **communities** | **Array<String>** | Set up to ten communities, each of no more than 64 characters long. The format is: community1[,community2,...]. This setting overwrites any previous settings. | 
-**enable** | **BOOLEAN** | Set enable to true/false | 
+**enable** | **Boolean** | Set enable to true/false | 
 **engineid** | **String** | Set SNMPv3 engine ID. | 
 **loglevel** | **String** | System Agent syslog logging level: debug|info|warning|error. | 
 **notraps** | **Array<String>** | Comma-separated list of trap OIDs (object identifiers) for traps not to be sent by the agent. Use 'reset' to clear the setting. | 

data/docs/ApplianceTechpreviewMonitoringSnmpSNMPHashConfig.md

@@ -5,6 +5,6 @@ Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
 **auth_hash** | **String** | Provide filename to secret for authentication hash, use in set --users (required secret) | 
 **priv_hash** | **String** | Provide filename to secret for privacy hash, use in set --users (secret) | 
-**raw_secret** | **BOOLEAN** | Make --auth_path and --priv_path flags read raw secret from command line instead of file. | 
+**raw_secret** | **Boolean** | Make --auth_path and --priv_path flags read raw secret from command line instead of file. | 
 
 

data/docs/ApplianceTechpreviewMonitoringSnmpSNMPTestResults.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**success** | **BOOLEAN** | Set success to true/false | 
+**success** | **Boolean** | Set success to true/false | 
 **message** | **String** | message | 
 
 

data/docs/ApplianceUpdatePendingInfo.md

@@ -6,13 +6,13 @@ Name | Type | Description | Notes
 **contents** | [**Array<VapiStdLocalizableMessage>**](VapiStdLocalizableMessage.md) | List of the 1. issues addressed since previous/current version 2. new features/improvements | 
 **services_will_be_stopped** | [**Array<ApplianceUpdateServiceInfo>**](ApplianceUpdateServiceInfo.md) | List of the services that will be stopped and restarted during the update installation. | 
 **eulas** | [**Array<VapiStdLocalizableMessage>**](VapiStdLocalizableMessage.md) | List of EULAs. This list has multiple entries and can be dynamic based on what we are actually installing. | 
-**staged** | **BOOLEAN** | Is the update staged | 
+**staged** | **Boolean** | Is the update staged | 
 **description** | [**VapiStdLocalizableMessage**](VapiStdLocalizableMessage.md) |  | 
 **priority** | [**ApplianceUpdateCommonInfoPriority**](ApplianceUpdateCommonInfoPriority.md) |  | 
 **severity** | [**ApplianceUpdateCommonInfoSeverity**](ApplianceUpdateCommonInfoSeverity.md) |  | 
 **update_type** | [**ApplianceUpdateCommonInfoCategory**](ApplianceUpdateCommonInfoCategory.md) |  | 
 **release_date** | **DateTime** | Update release date. | 
-**reboot_required** | **BOOLEAN** | Flag indicating whether reboot is required after update. | 
+**reboot_required** | **Boolean** | Flag indicating whether reboot is required after update. | 
 **size** | **Integer** | Download Size of update in Megabytes. | 
 
 

data/docs/{ApplianceUpdatePendingValidateUserData.md → ApplianceUpdatePendingInstallUserData.md}

@@ -1,9 +1,9 @@
-# VSphereAutomation::Appliance::ApplianceUpdatePendingValidateUserData
+# VSphereAutomation::Appliance::ApplianceUpdatePendingInstallUserData
 
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | **String** |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | **String** |  | [optional] 
 
 

data/docs/ApplianceUpdatePendingPrecheckResult.md

@@ -6,7 +6,7 @@ Name | Type | Description | Notes
 **check_time** | **DateTime** | Time when this precheck was run | 
 **estimated_time_to_install** | **Integer** | Rough estimate of time to install the update (minutes). | [optional] 
 **estimated_time_to_rollback** | **Integer** | Rough estimate of time to rollback the update (minutes). | [optional] 
-**reboot_required** | **BOOLEAN** | Is reboot required to install the update. | 
+**reboot_required** | **Boolean** | Is reboot required to install the update. | 
 **issues** | [**ApplianceNotifications**](ApplianceNotifications.md) |  | [optional] 
 **questions** | [**Array<ApplianceUpdatePendingQuestion>**](ApplianceUpdatePendingQuestion.md) | List of questions that must be answered to install the update. | 
 

data/docs/ApplianceUpdatePolicyConfig.md

@@ -7,6 +7,6 @@ Name | Type | Description | Notes
 **username** | **String** | Username for the update repository | [optional] 
 **password** | **String** | Password for the update repository | [optional] 
 **check_schedule** | [**Array<ApplianceUpdatePolicyTime>**](ApplianceUpdatePolicyTime.md) | Schedule when the automatic check will be run. | 
-**auto_stage** | **BOOLEAN** | Automatically stage the latest update if available. | 
+**auto_stage** | **Boolean** | Automatically stage the latest update if available. | 
 
 

data/docs/ApplianceUpdatePolicyInfo.md

@@ -7,8 +7,8 @@ Name | Type | Description | Notes
 **default_url** | **String** | Current appliance update default repository URL. | 
 **username** | **String** | Username for the update repository | [optional] 
 **check_schedule** | [**Array<ApplianceUpdatePolicyTime>**](ApplianceUpdatePolicyTime.md) | Schedule when the automatic check will be run. | 
-**auto_stage** | **BOOLEAN** | Automatically stage the latest update if available. | 
-**auto_update** | **BOOLEAN** | Is the appliance updated automatically. If {@term set} the appliance may ignore the check schedule or auto-stage settings. | 
-**manual_control** | **BOOLEAN** | Whether API client should allow the user to start update manually | 
+**auto_stage** | **Boolean** | Automatically stage the latest update if available. | 
+**auto_update** | **Boolean** | Is the appliance updated automatically. If {@term set} the appliance may ignore the check schedule or auto-stage settings. | 
+**manual_control** | **Boolean** | Whether API client should allow the user to start update manually | 
 
 

data/docs/ApplianceUpdateStagedInfo.md

@@ -3,14 +3,14 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**staging_complete** | **BOOLEAN** | Is staging complete | 
+**staging_complete** | **Boolean** | Is staging complete | 
 **version** | **String** | Version in form of X.Y.Z.P. e.g. 6.5.1.5400 | 
 **description** | [**VapiStdLocalizableMessage**](VapiStdLocalizableMessage.md) |  | 
 **priority** | [**ApplianceUpdateCommonInfoPriority**](ApplianceUpdateCommonInfoPriority.md) |  | 
 **severity** | [**ApplianceUpdateCommonInfoSeverity**](ApplianceUpdateCommonInfoSeverity.md) |  | 
 **update_type** | [**ApplianceUpdateCommonInfoCategory**](ApplianceUpdateCommonInfoCategory.md) |  | 
 **release_date** | **DateTime** | Update release date. | 
-**reboot_required** | **BOOLEAN** | Flag indicating whether reboot is required after update. | 
+**reboot_required** | **Boolean** | Flag indicating whether reboot is required after update. | 
 **size** | **Integer** | Download Size of update in Megabytes. | 
 
 

data/docs/ApplianceUpdateSummary.md

@@ -9,7 +9,7 @@ Name | Type | Description | Notes
 **severity** | [**ApplianceUpdateCommonInfoSeverity**](ApplianceUpdateCommonInfoSeverity.md) |  | 
 **update_type** | [**ApplianceUpdateCommonInfoCategory**](ApplianceUpdateCommonInfoCategory.md) |  | 
 **release_date** | **DateTime** | Update release date. | 
-**reboot_required** | **BOOLEAN** | Flag indicating whether reboot is required after update. | 
+**reboot_required** | **Boolean** | Flag indicating whether reboot is required after update. | 
 **size** | **Integer** | Download Size of update in Megabytes. | 
 
 

data/docs/ApplianceVmonServiceListDetailsResultValue.md

@@ -3,7 +3,7 @@
 ## Properties
 Name | Type | Description | Notes
 ------------ | ------------- | ------------- | -------------
-**value** | [**ApplianceVmonServiceInfo**](ApplianceVmonServiceInfo.md) |  | [optional] 
 **key** | **String** |  | [optional] 
+**value** | [**ApplianceVmonServiceInfo**](ApplianceVmonServiceInfo.md) |  | [optional] 
 
 

data/docs/HealthApi.md

@@ -16,6 +16,13 @@ Get health messages.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthApi.new
 item = 'item_example' # String | ID of the data item
@@ -41,12 +48,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthApplmgmtApi.md

@@ -16,6 +16,13 @@ Get health status of applmgmt services.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthApplmgmtApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthDatabasestorageApi.md

@@ -16,6 +16,13 @@ Get database storage health.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthDatabasestorageApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthLoadApi.md

@@ -16,6 +16,13 @@ Get load health.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthLoadApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthMemApi.md

@@ -16,6 +16,13 @@ Get memory health.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthMemApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthSoftwarepackagesApi.md

@@ -16,6 +16,13 @@ Get information on available software updates available in the remote vSphere Up
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthSoftwarepackagesApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthStorageApi.md

@@ -16,6 +16,13 @@ Get storage health.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthStorageApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthSwapApi.md

@@ -16,6 +16,13 @@ Get swap health.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthSwapApi.new
 
@@ -37,12 +44,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/HealthSystemApi.md

@@ -17,6 +17,13 @@ Get overall health of system.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthSystemApi.new
 
@@ -38,12 +45,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -56,6 +63,13 @@ Get last check timestamp of the health of the system.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::HealthSystemApi.new
 
@@ -77,12 +91,12 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 

data/docs/LocalAccountsApi.md

@@ -13,7 +13,7 @@ Method | HTTP request | Description
 
 
 # **create**
-> create(username, appliance_local_accounts_create)
+> create(username, request_body)
 
 Create a new local user account.
 
@@ -21,14 +21,21 @@ Create a new local user account.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::LocalAccountsApi.new
 username = 'username_example' # String | User login name
-appliance_local_accounts_create = VSphereAutomation::ApplianceLocalAccountsCreate.new # ApplianceLocalAccountsCreate | 
+request_body = Appliance::ApplianceLocalAccountsCreate.new # ApplianceLocalAccountsCreate | 
 
 begin
   #Create a new local user account.
-  api_instance.create(username, appliance_local_accounts_create)
+  api_instance.create(username, request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling LocalAccountsApi->create: #{e}"
 end
@@ -39,7 +46,7 @@ end
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
  **username** | **String**| User login name | 
- **appliance_local_accounts_create** | [**ApplianceLocalAccountsCreate**](ApplianceLocalAccountsCreate.md)|  | 
+ **request_body** | [**ApplianceLocalAccountsCreate**](ApplianceLocalAccountsCreate.md)|  | 
 
 ### Return type
 
@@ -47,12 +54,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -65,6 +72,13 @@ Delete a local user account.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::LocalAccountsApi.new
 username = 'username_example' # String | User login name
@@ -89,12 +103,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -107,6 +121,13 @@ Get the local user account information.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::LocalAccountsApi.new
 username = 'username_example' # String | User login name
@@ -132,12 +153,12 @@ Name | Type | Description  | Notes
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
@@ -150,6 +171,13 @@ Get a list of the local user accounts.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::LocalAccountsApi.new
 
@@ -171,17 +199,17 @@ This endpoint does not need any parameter.
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: Not defined
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **set**
-> set(username, appliance_local_accounts_set)
+> set(username, request_body)
 
 Set local user account properties.
 
@@ -189,14 +217,21 @@ Set local user account properties.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::LocalAccountsApi.new
 username = 'username_example' # String | User login name
-appliance_local_accounts_set = VSphereAutomation::ApplianceLocalAccountsSet.new # ApplianceLocalAccountsSet | 
+request_body = Appliance::ApplianceLocalAccountsSet.new # ApplianceLocalAccountsSet | 
 
 begin
   #Set local user account properties.
-  api_instance.set(username, appliance_local_accounts_set)
+  api_instance.set(username, request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling LocalAccountsApi->set: #{e}"
 end
@@ -207,7 +242,7 @@ end
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
  **username** | **String**| User login name | 
- **appliance_local_accounts_set** | [**ApplianceLocalAccountsSet**](ApplianceLocalAccountsSet.md)|  | 
+ **request_body** | [**ApplianceLocalAccountsSet**](ApplianceLocalAccountsSet.md)|  | 
 
 ### Return type
 
@@ -215,17 +250,17 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json
 
 
 
 # **update**
-> update(username, appliance_local_accounts_update)
+> update(username, request_body)
 
 Update selected fields in local user account properties.
 
@@ -233,14 +268,21 @@ Update selected fields in local user account properties.
 ```ruby
 # load the gem
 require 'vsphere-automation-appliance'
+# setup authorization
+VSphereAutomation::Configuration.new.tap do |config|
+  # Configure API key authorization: api_key
+  config.api_key['vmware-api-session-id'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['vmware-api-session-id'] = 'Bearer'
+end
 
 api_instance = VSphereAutomation::Appliance::LocalAccountsApi.new
 username = 'username_example' # String | User login name
-appliance_local_accounts_update = VSphereAutomation::ApplianceLocalAccountsUpdate.new # ApplianceLocalAccountsUpdate | 
+request_body = Appliance::ApplianceLocalAccountsUpdate.new # ApplianceLocalAccountsUpdate | 
 
 begin
   #Update selected fields in local user account properties.
-  api_instance.update(username, appliance_local_accounts_update)
+  api_instance.update(username, request_body)
 rescue VSphereAutomation::ApiError => e
   puts "Exception when calling LocalAccountsApi->update: #{e}"
 end
@@ -251,7 +293,7 @@ end
 Name | Type | Description  | Notes
 ------------- | ------------- | ------------- | -------------
  **username** | **String**| User login name | 
- **appliance_local_accounts_update** | [**ApplianceLocalAccountsUpdate**](ApplianceLocalAccountsUpdate.md)|  | 
+ **request_body** | [**ApplianceLocalAccountsUpdate**](ApplianceLocalAccountsUpdate.md)|  | 
 
 ### Return type
 
@@ -259,12 +301,12 @@ nil (empty response body)
 
 ### Authorization
 
-No authorization required
+[api_key](../README.md#api_key)
 
 ### HTTP request headers
 
  - **Content-Type**: application/json
- - **Accept**: */*
+ - **Accept**: application/json