urbanopt-cli 0.6.4 → 0.7.0

data/example_files/resources/hpxml-measures/BuildResidentialHPXML/tests/build_residential_hpxml_test.rb

@@ -5,416 +5,1128 @@ require 'openstudio/ruleset/ShowRunnerOutput'
 require 'minitest/autorun'
 require_relative '../measure.rb'
 require 'fileutils'
-require_relative '../../HPXMLtoOpenStudio/resources/meta_measure'
-require_relative '../../HPXMLtoOpenStudio/resources/hpxml'
 
 class BuildResidentialHPXMLTest < MiniTest::Test
   def test_workflows
-    require 'json'
+    # Extra buildings that don't correspond with sample files
+    hpxmls_files = {
+      # Base files to derive from
+      'base-sfd.xml' => nil,
+      'base-sfa.xml' => 'base-sfd.xml',
+      'base-mf.xml' => 'base-sfd.xml',
 
-    this_dir = File.dirname(__FILE__)
+      # Extra files to test
+      'extra-auto.xml' => 'base-sfd.xml',
+      'extra-pv-roofpitch.xml' => 'base-sfd.xml',
+      'extra-dhw-solar-latitude.xml' => 'base-sfd.xml',
+      'extra-second-refrigerator.xml' => 'base-sfd.xml',
+      'extra-second-heating-system-portable-heater-to-heating-system.xml' => 'base-sfd.xml',
+      'extra-second-heating-system-fireplace-to-heating-system.xml' => 'base-sfd.xml',
+      'extra-second-heating-system-boiler-to-heating-system.xml' => 'base-sfd.xml',
+      'extra-second-heating-system-portable-heater-to-heat-pump.xml' => 'base-sfd.xml',
+      'extra-second-heating-system-fireplace-to-heat-pump.xml' => 'base-sfd.xml',
+      'extra-second-heating-system-boiler-to-heat-pump.xml' => 'base-sfd.xml',
+      'extra-enclosure-windows-shading.xml' => 'base-sfd.xml',
+      'extra-enclosure-garage-partially-protruded.xml' => 'base-sfd.xml',
+      'extra-enclosure-garage-atticroof-conditioned.xml' => 'base-sfd.xml',
+      'extra-enclosure-atticroof-conditioned-eaves-gable.xml' => 'base-sfd.xml',
+      'extra-enclosure-atticroof-conditioned-eaves-hip.xml' => 'extra-enclosure-atticroof-conditioned-eaves-gable.xml',
+      'extra-zero-refrigerator-kwh.xml' => 'base-sfd.xml',
+      'extra-zero-extra-refrigerator-kwh.xml' => 'base-sfd.xml',
+      'extra-zero-freezer-kwh.xml' => 'base-sfd.xml',
+      'extra-zero-clothes-washer-kwh.xml' => 'base-sfd.xml',
+      'extra-zero-dishwasher-kwh.xml' => 'base-sfd.xml',
+      'extra-sfa-atticroof-flat.xml' => 'base-sfa.xml',
+      'extra-gas-pool-heater-with-zero-kwh.xml' => 'base-sfd.xml',
+      'extra-gas-hot-tub-heater-with-zero-kwh.xml' => 'base-sfd.xml',
+      'extra-no-rim-joists.xml' => 'base-sfd.xml',
+      'extra-iecc-zone-different-than-epw.xml' => 'base-sfd.xml',
+      'extra-state-code-different-than-epw.xml' => 'base-sfd.xml',
 
-    test_dirs = [
-      this_dir,
-    ]
+      'extra-sfa-atticroof-conditioned-eaves-gable.xml' => 'extra-sfa-slab.xml',
+      'extra-sfa-atticroof-conditioned-eaves-hip.xml' => 'extra-sfa-atticroof-conditioned-eaves-gable.xml',
+      'extra-mf-eaves.xml' => 'extra-mf-slab.xml',
 
-    test_base = true
-    test_extra = true
+      'extra-sfa-slab.xml' => 'base-sfa.xml',
+      'extra-sfa-vented-crawlspace.xml' => 'base-sfa.xml',
+      'extra-sfa-unvented-crawlspace.xml' => 'base-sfa.xml',
+      'extra-sfa-conditioned-crawlspace.xml' => 'base-sfa.xml',
+      'extra-sfa-unconditioned-basement.xml' => 'base-sfa.xml',
 
-    osws = []
-    test_dirs.each do |test_dir|
-      Dir["#{test_dir}/base*.osw"].sort.each do |osw|
-        osws << File.absolute_path(osw) if test_base
-      end
-      Dir["#{test_dir}/extra*.osw"].sort.each do |osw|
-        osws << File.absolute_path(osw) if test_extra
-      end
-    end
-
-    workflow_dir = File.expand_path(File.join(File.dirname(__FILE__), '../../workflow/sample_files'))
-    tests_dir = File.expand_path(File.join(File.dirname(__FILE__), '../../BuildResidentialHPXML/tests'))
-    built_dir = File.join(tests_dir, 'built_residential_hpxml')
-    unless Dir.exist?(built_dir)
-      Dir.mkdir(built_dir)
-    end
-
-    puts "Running #{osws.size} OSW files..."
-    measures = {}
-    fail = false
-    osws.each do |osw|
-      puts "\nTesting #{File.basename(osw)}..."
-
-      _setup(tests_dir)
-      osw_hash = JSON.parse(File.read(osw))
-      measures_dir = File.join(File.dirname(__FILE__), osw_hash['measure_paths'][0])
-      osw_hash['steps'].each do |step|
-        measures[step['measure_dir_name']] = [step['arguments']]
-        model = OpenStudio::Model::Model.new
-        runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-        # Apply measure
-        success = apply_measures(measures_dir, measures, runner, model)
-
-        # Report warnings/errors
-        runner.result.stepWarnings.each do |s|
-          puts "Warning: #{s}"
-        end
-        runner.result.stepErrors.each do |s|
-          puts "Error: #{s}"
-        end
+      'extra-sfa-rear-units.xml' => 'base-sfa.xml',
+      'extra-sfa-exterior-corridor.xml' => 'base-sfa.xml',
 
-        assert(success)
+      'extra-sfa-slab-middle.xml' => 'extra-sfa-slab.xml',
+      'extra-sfa-slab-right.xml' => 'extra-sfa-slab.xml',
+      'extra-sfa-vented-crawlspace-middle.xml' => 'extra-sfa-vented-crawlspace.xml',
+      'extra-sfa-vented-crawlspace-right.xml' => 'extra-sfa-vented-crawlspace.xml',
+      'extra-sfa-unvented-crawlspace-middle.xml' => 'extra-sfa-unvented-crawlspace.xml',
+      'extra-sfa-unvented-crawlspace-right.xml' => 'extra-sfa-unvented-crawlspace.xml',
+      'extra-sfa-unconditioned-basement-middle.xml' => 'extra-sfa-unconditioned-basement.xml',
+      'extra-sfa-unconditioned-basement-right.xml' => 'extra-sfa-unconditioned-basement.xml',
 
-        if File.basename(osw).start_with? 'extra-'
-          next # No corresponding sample file
-        end
+      'extra-mf-slab.xml' => 'base-mf.xml',
+      'extra-mf-vented-crawlspace.xml' => 'base-mf.xml',
+      'extra-mf-unvented-crawlspace.xml' => 'base-mf.xml',
 
-        # Compare the hpxml to the manually created one
-        test_dir = File.basename(File.dirname(osw))
-        hpxml_path = step['arguments']['hpxml_path']
-        begin
-          _check_hpxmls(workflow_dir, built_dir, test_dir, hpxml_path)
-        rescue Exception => e
-          puts "#{e}\n#{e.backtrace.join('\n')}"
-          fail = true
-        end
-      end
-      break if fail # FIXME: Temporary
-    end
+      'extra-mf-rear-units.xml' => 'base-mf.xml',
+      'extra-mf-exterior-corridor.xml' => 'base-mf.xml',
 
-    assert false if fail
-  end
+      'extra-mf-slab-left-bottom.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-left-middle.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-left-top.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-middle-bottom.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-middle-middle.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-middle-top.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-right-bottom.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-right-middle.xml' => 'extra-mf-slab.xml',
+      'extra-mf-slab-right-top.xml' => 'extra-mf-slab.xml',
+      'extra-mf-vented-crawlspace-left-bottom.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-left-middle.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-left-top.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-middle-bottom.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-middle-middle.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-middle-top.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-right-bottom.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-right-middle.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-vented-crawlspace-right-top.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-left-bottom.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-left-middle.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-left-top.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-middle-bottom.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-middle-middle.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-middle-top.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-right-bottom.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-right-middle.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-right-top.xml' => 'extra-mf-unvented-crawlspace.xml',
 
-  def test_invalid_workflows
-    require 'json'
+      'extra-mf-slab-rear-units.xml' => 'extra-mf-slab.xml',
+      'extra-mf-vented-crawlspace-rear-units.xml' => 'extra-mf-vented-crawlspace.xml',
+      'extra-mf-unvented-crawlspace-rear-units.xml' => 'extra-mf-unvented-crawlspace.xml',
+      'extra-mf-slab-left-bottom-rear-units.xml' => 'extra-mf-slab-left-bottom.xml',
+      'extra-mf-slab-left-middle-rear-units.xml' => 'extra-mf-slab-left-middle.xml',
+      'extra-mf-slab-left-top-rear-units.xml' => 'extra-mf-slab-left-top.xml',
+      'extra-mf-slab-middle-bottom-rear-units.xml' => 'extra-mf-slab-middle-bottom.xml',
+      'extra-mf-slab-middle-middle-rear-units.xml' => 'extra-mf-slab-middle-middle.xml',
+      'extra-mf-slab-middle-top-rear-units.xml' => 'extra-mf-slab-middle-top.xml',
+      'extra-mf-slab-right-bottom-rear-units.xml' => 'extra-mf-slab-right-bottom.xml',
+      'extra-mf-slab-right-middle-rear-units.xml' => 'extra-mf-slab-right-middle.xml',
+      'extra-mf-slab-right-top-rear-units.xml' => 'extra-mf-slab-right-top.xml',
+      'extra-mf-vented-crawlspace-left-bottom-rear-units.xml' => 'extra-mf-vented-crawlspace-left-bottom.xml',
+      'extra-mf-vented-crawlspace-left-middle-rear-units.xml' => 'extra-mf-vented-crawlspace-left-middle.xml',
+      'extra-mf-vented-crawlspace-left-top-rear-units.xml' => 'extra-mf-vented-crawlspace-left-top.xml',
+      'extra-mf-vented-crawlspace-middle-bottom-rear-units.xml' => 'extra-mf-vented-crawlspace-middle-bottom.xml',
+      'extra-mf-vented-crawlspace-middle-middle-rear-units.xml' => 'extra-mf-vented-crawlspace-middle-middle.xml',
+      'extra-mf-vented-crawlspace-middle-top-rear-units.xml' => 'extra-mf-vented-crawlspace-middle-top.xml',
+      'extra-mf-vented-crawlspace-right-bottom-rear-units.xml' => 'extra-mf-vented-crawlspace-right-bottom.xml',
+      'extra-mf-vented-crawlspace-right-middle-rear-units.xml' => 'extra-mf-vented-crawlspace-right-middle.xml',
+      'extra-mf-vented-crawlspace-right-top-rear-units.xml' => 'extra-mf-vented-crawlspace-right-top.xml',
+      'extra-mf-unvented-crawlspace-left-bottom-rear-units.xml' => 'extra-mf-unvented-crawlspace-left-bottom.xml',
+      'extra-mf-unvented-crawlspace-left-middle-rear-units.xml' => 'extra-mf-unvented-crawlspace-left-middle.xml',
+      'extra-mf-unvented-crawlspace-left-top-rear-units.xml' => 'extra-mf-unvented-crawlspace-left-top.xml',
+      'extra-mf-unvented-crawlspace-middle-bottom-rear-units.xml' => 'extra-mf-unvented-crawlspace-middle-bottom.xml',
+      'extra-mf-unvented-crawlspace-middle-middle-rear-units.xml' => 'extra-mf-unvented-crawlspace-middle-middle.xml',
+      'extra-mf-unvented-crawlspace-middle-top-rear-units.xml' => 'extra-mf-unvented-crawlspace-middle-top.xml',
+      'extra-mf-unvented-crawlspace-right-bottom-rear-units.xml' => 'extra-mf-unvented-crawlspace-right-bottom.xml',
+      'extra-mf-unvented-crawlspace-right-middle-rear-units.xml' => 'extra-mf-unvented-crawlspace-right-middle.xml',
+      'extra-mf-unvented-crawlspace-right-top-rear-units.xml' => 'extra-mf-unvented-crawlspace-right-top.xml',
 
-    this_dir = File.dirname(__FILE__)
+      'error-heating-system-and-heat-pump.xml' => 'base-sfd.xml',
+      'error-cooling-system-and-heat-pump.xml' => 'base-sfd.xml',
+      'error-non-integer-geometry-num-bathrooms.xml' => 'base-sfd.xml',
+      'error-non-integer-ceiling-fan-quantity.xml' => 'base-sfd.xml',
+      'error-sfd-conditioned-basement-zero-foundation-height.xml' => 'base-sfd.xml',
+      'error-sfd-adiabatic-walls.xml' => 'base-sfd.xml',
+      'error-sfa-ambient.xml' => 'base-sfa.xml',
+      'error-mf-bottom-crawlspace-zero-foundation-height.xml' => 'base-mf.xml',
+      'error-ducts-location-and-areas-not-same-type.xml' => 'base-sfd.xml',
+      'error-second-heating-system-serves-total-heat-load.xml' => 'base-sfd.xml',
+      'error-second-heating-system-but-no-primary-heating.xml' => 'base-sfd.xml',
+      'error-sfa-no-building-num-units.xml' => 'base-sfa.xml',
+      'error-sfa-above-apartment.xml' => 'base-sfa.xml',
+      'error-sfa-below-apartment.xml' => 'base-sfa.xml',
+      'error-sfa-all-adiabatic-walls.xml' => 'base-sfa.xml',
+      'error-mf-no-building-num-units.xml' => 'base-mf.xml',
+      'error-mf-all-adiabatic-walls.xml' => 'base-mf.xml',
+      'error-mf-two-stories.xml' => 'base-mf.xml',
+      'error-dhw-indirect-without-boiler.xml' => 'base-sfd.xml',
+      'error-foundation-wall-insulation-greater-than-height.xml' => 'base-sfd.xml',
+      'error-conditioned-attic-with-one-floor-above-grade.xml' => 'base-sfd.xml',
+      'error-zero-number-of-bedrooms.xml' => 'base-sfd.xml',
+      'error-sfd-with-shared-system.xml' => 'base-sfd.xml',
+      'error-rim-joist-height-but-no-assembly-r.xml' => 'base-sfd.xml',
+      'error-rim-joist-assembly-r-but-no-height.xml' => 'base-sfd.xml',
 
-    tests_dir = File.expand_path(File.join(File.dirname(__FILE__), '../../BuildResidentialHPXML/tests'))
-    built_dir = File.join(tests_dir, 'built_residential_hpxml')
-    unless Dir.exist?(built_dir)
-      Dir.mkdir(built_dir)
-    end
+      'warning-non-electric-heat-pump-water-heater.xml' => 'base-sfd.xml',
+      'warning-sfd-slab-non-zero-foundation-height.xml' => 'base-sfd.xml',
+      'warning-mf-bottom-slab-non-zero-foundation-height.xml' => 'base-mf.xml',
+      'warning-slab-non-zero-foundation-height-above-grade.xml' => 'base-sfd.xml',
+      'warning-second-heating-system-serves-majority-heat.xml' => 'base-sfd.xml',
+      'warning-vented-crawlspace-with-wall-and-ceiling-insulation.xml' => 'base-sfd.xml',
+      'warning-unvented-crawlspace-with-wall-and-ceiling-insulation.xml' => 'base-sfd.xml',
+      'warning-unconditioned-basement-with-wall-and-ceiling-insulation.xml' => 'base-sfd.xml',
+      'warning-vented-attic-with-floor-and-roof-insulation.xml' => 'base-sfd.xml',
+      'warning-unvented-attic-with-floor-and-roof-insulation.xml' => 'base-sfd.xml',
+      'warning-conditioned-basement-with-ceiling-insulation.xml' => 'base-sfd.xml',
+      'warning-conditioned-attic-with-floor-insulation.xml' => 'base-sfd.xml',
+      'warning-multipliers-without-tv-plug-loads.xml' => 'base-sfd.xml',
+      'warning-multipliers-without-other-plug-loads.xml' => 'base-sfd.xml',
+      'warning-multipliers-without-well-pump-plug-loads.xml' => 'base-sfd.xml',
+      'warning-multipliers-without-vehicle-plug-loads.xml' => 'base-sfd.xml',
+      'warning-multipliers-without-fuel-loads.xml' => 'base-sfd.xml',
+    }
 
-    expected_warning_msgs = {
-      'non-electric-heat-pump-water-heater.osw' => 'water_heater_type=heat pump water heater and water_heater_fuel_type=natural gas',
-      'single-family-detached-slab-non-zero-foundation-height.osw' => 'geometry_unit_type=single-family detached and geometry_foundation_type=SlabOnGrade and geometry_foundation_height=8.0',
-      'multifamily-bottom-slab-non-zero-foundation-height.osw' => 'geometry_unit_type=apartment unit and geometry_level=Bottom and geometry_foundation_type=SlabOnGrade and geometry_foundation_height=8.0',
-      'slab-non-zero-foundation-height-above-grade.osw' => 'geometry_foundation_type=SlabOnGrade and geometry_foundation_height_above_grade=1.0',
-      'second-heating-system-serves-majority-heat.osw' => 'heating_system_type_2=Fireplace and heating_system_fraction_heat_load_served_2=0.6',
-      'vented-crawlspace-with-wall-and-ceiling-insulation.osw' => 'geometry_foundation_type=VentedCrawlspace and foundation_wall_insulation_r=8.9 and foundation_wall_assembly_r=false and floor_assembly_r=10.0',
-      'unvented-crawlspace-with-wall-and-ceiling-insulation.osw' => 'geometry_foundation_type=UnventedCrawlspace and foundation_wall_insulation_r=8.9 and foundation_wall_assembly_r=false and floor_assembly_r=10.0',
-      'unconditioned-basement-with-wall-and-ceiling-insulation.osw' => 'geometry_foundation_type=UnconditionedBasement and foundation_wall_insulation_r=8.9 and foundation_wall_assembly_r=false and floor_assembly_r=10.0',
-      'vented-attic-with-floor-and-roof-insulation.osw' => 'geometry_attic_type=VentedAttic and ceiling_assembly_r=39.3 and roof_assembly_r=10.0',
-      'unvented-attic-with-floor-and-roof-insulation.osw' => 'geometry_attic_type=UnventedAttic and ceiling_assembly_r=39.3 and roof_assembly_r=10.0',
-      'conditioned-basement-with-ceiling-insulation.osw' => 'geometry_foundation_type=ConditionedBasement and floor_assembly_r=10.0',
-      'conditioned-attic-with-floor-insulation.osw' => 'geometry_attic_type=ConditionedAttic and ceiling_assembly_r=39.3',
-      'multipliers-without-tv-plug-loads.osw' => 'plug_loads_television_annual_kwh=0.0 and plug_loads_television_usage_multiplier=1.0',
-      'multipliers-without-other-plug-loads.osw' => 'plug_loads_other_annual_kwh=0.0 and plug_loads_other_usage_multiplier=1.0',
-      'multipliers-without-well-pump-plug-loads.osw' => 'plug_loads_well_pump_annual_kwh=0.0 and plug_loads_well_pump_usage_multiplier=1.0',
-      'multipliers-without-vehicle-plug-loads.osw' => 'plug_loads_vehicle_annual_kwh=0.0 and plug_loads_vehicle_usage_multiplier=1.0',
-      'multipliers-without-fuel-loads.osw' => 'fuel_loads_grill_present=false and fuel_loads_grill_usage_multiplier=1.0 and fuel_loads_lighting_present=false and fuel_loads_lighting_usage_multiplier=1.0 and fuel_loads_fireplace_present=false and fuel_loads_fireplace_usage_multiplier=1.0'
+    expected_errors = {
+      'error-heating-system-and-heat-pump.xml' => 'heating_system_type=Furnace and heat_pump_type=air-to-air',
+      'error-cooling-system-and-heat-pump.xml' => 'cooling_system_type=central air conditioner and heat_pump_type=air-to-air',
+      'error-non-integer-geometry-num-bathrooms.xml' => 'geometry_unit_num_bathrooms=1.5',
+      'error-non-integer-ceiling-fan-quantity.xml' => 'ceiling_fan_quantity=0.5',
+      'error-sfd-conditioned-basement-zero-foundation-height.xml' => 'geometry_unit_type=single-family detached and geometry_foundation_type=ConditionedBasement and geometry_foundation_height=0.0',
+      'error-sfd-adiabatic-walls.xml' => 'No adiabatic surfaces can be applied to single-family detached homes',
+      'error-sfa-ambient.xml' => 'geometry_unit_type=single-family attached and geometry_foundation_type=Ambient',
+      'error-mf-conditioned-basement' => 'geometry_unit_type=apartment unit and geometry_foundation_type=ConditionedBasement',
+      'error-mf-conditioned-crawlspace' => 'geometry_unit_type=apartment unit and geometry_foundation_type=ConditionedCrawlspace',
+      'error-mf-bottom-crawlspace-zero-foundation-height.xml' => 'geometry_unit_type=apartment unit and geometry_foundation_type=UnventedCrawlspace and geometry_foundation_height=0.0',
+      'error-ducts-location-and-areas-not-same-type.xml' => 'ducts_supply_location=auto and ducts_supply_surface_area=150.0 and ducts_return_location=attic - unvented and ducts_return_surface_area=50.0',
+      'error-second-heating-system-serves-total-heat-load.xml' => 'heating_system_2_type=Fireplace and heating_system_2_fraction_heat_load_served=1.0',
+      'error-second-heating-system-but-no-primary-heating.xml' => 'heating_system_type=none and heat_pump_type=none and heating_system_2_type=Fireplace',
+      'error-sfa-no-building-num-units.xml' => 'geometry_unit_type=single-family attached and geometry_building_num_units=not provided',
+      'error-sfa-above-apartment.xml' => 'Single-family attached buildings cannot be above another unit',
+      'error-sfa-below-apartment.xml' => 'Single-family attached buildings cannot be below another unit',
+      'error-sfa-all-adiabatic-walls.xml' => 'At least one wall must be set to non-adiabatic',
+      'error-mf-no-building-num-units.xml' => 'geometry_unit_type=apartment unit and geometry_building_num_units=not provided',
+      'error-mf-all-adiabatic-walls.xml' => 'At least one wall must be set to non-adiabatic',
+      'error-mf-two-stories.xml' => 'Apartment units can only have one above grade floor',
+      'error-dhw-indirect-without-boiler.xml' => 'water_heater_type=space-heating boiler with storage tank and heating_system_type=Furnace',
+      'error-conditioned-attic-with-one-floor-above-grade.xml' => 'geometry_unit_num_floors_above_grade=1 and geometry_attic_type=ConditionedAttic',
+      'error-zero-number-of-bedrooms.xml' => 'geometry_unit_num_bedrooms=0',
+      'error-sfd-with-shared-system.xml' => 'geometry_unit_type=single-family detached and heating_system_type=Shared Boiler w/ Baseboard',
+      'error-rim-joist-height-but-no-assembly-r.xml' => 'geometry_rim_joist_height=9.25 and rim_joist_assembly_r=not provided',
+      'error-rim-joist-assembly-r-but-no-height.xml' => 'rim_joist_assembly_r=23.0 and geometry_rim_joist_height=not provided',
     }
 
-    expected_error_msgs = {
-      'heating-system-and-heat-pump.osw' => 'heating_system_type=Furnace and heat_pump_type=air-to-air',
-      'cooling-system-and-heat-pump.osw' => 'cooling_system_type=central air conditioner and heat_pump_type=air-to-air',
-      'non-integer-geometry-num-bathrooms.osw' => 'geometry_num_bathrooms=1.5',
-      'non-integer-ceiling-fan-quantity.osw' => 'ceiling_fan_quantity=0.5',
-      'single-family-detached-finished-basement-zero-foundation-height.osw' => 'geometry_unit_type=single-family detached and geometry_foundation_type=ConditionedBasement and geometry_foundation_height=0.0',
-      'single-family-attached-ambient.osw' => 'geometry_unit_type=single-family attached and geometry_foundation_type=Ambient',
-      'multifamily-bottom-crawlspace-zero-foundation-height.osw' => 'geometry_unit_type=apartment unit and geometry_level=Bottom and geometry_foundation_type=UnventedCrawlspace and geometry_foundation_height=0.0',
-      'ducts-location-and-areas-not-same-type.osw' => 'ducts_supply_location=auto and ducts_supply_surface_area=150.0 and ducts_return_location=attic - unvented and ducts_return_surface_area=50.0',
-      'second-heating-system-serves-total-heat-load.osw' => 'heating_system_type_2=Fireplace and heating_system_fraction_heat_load_served_2=1.0',
-      'second-heating-system-but-no-primary-heating.osw' => 'heating_system_type=none and heat_pump_type=none and heating_system_type_2=Fireplace',
-      'single-family-attached-no-building-orientation.osw' => 'geometry_unit_type=single-family attached and geometry_building_num_units=false and geometry_horizontal_location=false',
-      'multifamily-no-building-orientation.osw' => 'geometry_unit_type=apartment unit and geometry_building_num_units=false and geometry_level=false and geometry_horizontal_location=false',
-      'dhw-indirect-without-boiler.osw' => 'water_heater_type=space-heating boiler with storage tank and heating_system_type=Furnace',
-      'foundation-wall-insulation-greater-than-height.osw' => 'foundation_wall_insulation_distance_to_bottom=6.0 and geometry_foundation_height=4.0',
-      'conditioned-attic-with-one-floor-above-grade.osw' => 'geometry_num_floors_above_grade=1 and geometry_attic_type=ConditionedAttic',
-      'zero-number-of-bedrooms.osw' => 'geometry_num_bedrooms=0',
-      'single-family-detached-with-shared-system.osw' => 'geometry_unit_type=single-family detached and heating_system_type=Shared Boiler w/ Baseboard'
+    expected_warnings = {
+      'warning-non-electric-heat-pump-water-heater.xml' => 'water_heater_type=heat pump water heater and water_heater_fuel_type=natural gas',
+      'warning-sfd-slab-non-zero-foundation-height.xml' => 'geometry_unit_type=single-family detached and geometry_foundation_type=SlabOnGrade and geometry_foundation_height=8.0',
+      'warning-mf-bottom-slab-non-zero-foundation-height.xml' => 'geometry_unit_type=apartment unit and geometry_foundation_type=SlabOnGrade and geometry_foundation_height=8.0',
+      'warning-slab-non-zero-foundation-height-above-grade.xml' => 'geometry_foundation_type=SlabOnGrade and geometry_foundation_height_above_grade=1.0',
+      'warning-second-heating-system-serves-majority-heat.xml' => 'heating_system_2_type=Fireplace and heating_system_2_fraction_heat_load_served=0.6',
+      'warning-vented-crawlspace-with-wall-and-ceiling-insulation.xml' => 'geometry_foundation_type=VentedCrawlspace and foundation_wall_insulation_r=8.9 and foundation_wall_assembly_r=10.0 and floor_over_foundation_assembly_r=10.0',
+      'warning-unvented-crawlspace-with-wall-and-ceiling-insulation.xml' => 'geometry_foundation_type=UnventedCrawlspace and foundation_wall_insulation_r=8.9 and foundation_wall_assembly_r=10.0 and floor_over_foundation_assembly_r=10.0',
+      'warning-unconditioned-basement-with-wall-and-ceiling-insulation.xml' => 'geometry_foundation_type=UnconditionedBasement and foundation_wall_insulation_r=8.9 and foundation_wall_assembly_r=10.0 and floor_over_foundation_assembly_r=10.0',
+      'warning-vented-attic-with-floor-and-roof-insulation.xml' => 'geometry_attic_type=VentedAttic and ceiling_assembly_r=39.3 and roof_assembly_r=10.0',
+      'warning-unvented-attic-with-floor-and-roof-insulation.xml' => 'geometry_attic_type=UnventedAttic and ceiling_assembly_r=39.3 and roof_assembly_r=10.0',
+      'warning-conditioned-basement-with-ceiling-insulation.xml' => 'geometry_foundation_type=ConditionedBasement and floor_over_foundation_assembly_r=10.0',
+      'warning-conditioned-attic-with-floor-insulation.xml' => 'geometry_attic_type=ConditionedAttic and ceiling_assembly_r=39.3',
+      'warning-multipliers-without-tv-plug-loads.xml' => 'misc_plug_loads_television_annual_kwh=0.0 and misc_plug_loads_television_usage_multiplier=1.0',
+      'warning-multipliers-without-other-plug-loads.xml' => 'misc_plug_loads_other_annual_kwh=0.0 and misc_plug_loads_other_usage_multiplier=1.0',
+      'warning-multipliers-without-well-pump-plug-loads.xml' => 'misc_plug_loads_well_pump_annual_kwh=0.0 and misc_plug_loads_well_pump_usage_multiplier=1.0',
+      'warning-multipliers-without-vehicle-plug-loads.xml' => 'misc_plug_loads_vehicle_annual_kwh=0.0 and misc_plug_loads_vehicle_usage_multiplier=1.0',
+      'warning-multipliers-without-fuel-loads.xml' => 'misc_fuel_loads_grill_present=false and misc_fuel_loads_grill_usage_multiplier=1.0 and misc_fuel_loads_lighting_present=false and misc_fuel_loads_lighting_usage_multiplier=1.0 and misc_fuel_loads_fireplace_present=false and misc_fuel_loads_fireplace_usage_multiplier=1.0',
     }
 
-    measures = {}
-    Dir["#{this_dir}/invalid_files/*.osw"].sort.each do |osw|
-      puts "\nTesting #{File.basename(osw)}..."
-
-      _setup(this_dir)
-      osw_hash = JSON.parse(File.read(osw))
-      measures_dir = File.join(File.dirname(__FILE__), osw_hash['measure_paths'][0])
-      osw_hash['steps'].each do |step|
-        measures[step['measure_dir_name']] = [step['arguments']]
-        model = OpenStudio::Model::Model.new
-        runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-        # Apply measure
-        success = apply_measures(measures_dir, measures, runner, model)
-
-        # Report warnings/errors
-        if Gem::Specification::find_all_by_name('nokogiri').any?
-          assert(runner.result.stepWarnings.length > 0 || runner.result.stepErrors.length > 0)
-        else
-          assert(runner.result.stepWarnings.length > 1 || runner.result.stepErrors.length > 0)
-        end
-        runner.result.stepWarnings.each do |s|
-          next if s.include? 'nokogiri'
+    hpxmls_files.each_with_index do |(hpxml_file, parent), i|
+      puts "[#{i + 1}/#{hpxmls_files.size}] Testing #{hpxml_file}..."
 
-          puts "Warning: #{s}"
-          assert_equal(s, expected_warning_msgs[File.basename(osw)])
+      begin
+        all_hpxml_files = [hpxml_file]
+        unless parent.nil?
+          all_hpxml_files.unshift(parent)
         end
-        runner.result.stepErrors.each do |s|
-          puts "Error: #{s}"
-          assert_equal(s, expected_error_msgs[File.basename(osw)])
+        while not parent.nil?
+          next unless hpxmls_files.keys.include? parent
+
+          unless hpxmls_files[parent].nil?
+            all_hpxml_files.unshift(hpxmls_files[parent])
+          end
+          parent = hpxmls_files[parent]
         end
 
-        if expected_error_msgs.include? File.basename(osw)
-          assert(!success)
-        else
-          assert(success)
+        args = {}
+        all_hpxml_files.each do |f|
+          _set_measure_argument_values(f, args)
         end
+
+        File.delete(args['hpxml_path']) if File.exist? args['hpxml_path']
+        _test_measure(args, expected_errors[hpxml_file], expected_warnings[hpxml_file])
+        File.delete(args['hpxml_path']) if File.exist? args['hpxml_path']
+      rescue Exception => e
+        puts "\n#{e}\n#{e.backtrace.join('\n')}"
+        puts "\nError: Did not successfully generate #{hpxml_file}."
+        exit!
       end
     end
   end
 
   private
 
-  def _check_hpxmls(workflow_dir, built_dir, test_dir, hpxml_path)
-    if test_dir == 'tests'
-      test_dir = ''
-    end
+  def _set_measure_argument_values(hpxml_file, args)
+    args['hpxml_path'] = File.absolute_path(File.join(File.dirname(__FILE__), hpxml_file))
 
-    hpxml_path = {
-      'Rakefile' => File.join(workflow_dir, test_dir, File.basename(hpxml_path)),
-      'BuildResidentialHPXML' => File.join(built_dir, File.basename(hpxml_path))
-    }
+    # Base
+    if ['base-sfd.xml'].include? hpxml_file
+      args['simulation_control_timestep'] = 60
+      args['weather_station_epw_filepath'] = 'USA_CO_Denver.Intl.AP.725650_TMY3.epw'
+      args['site_type'] = HPXML::SiteTypeSuburban
+      args['geometry_unit_type'] = HPXML::ResidentialTypeSFD
+      args['geometry_unit_cfa'] = 2700.0
+      args['geometry_unit_num_floors_above_grade'] = 1
+      args['geometry_average_ceiling_height'] = 8.0
+      args['geometry_unit_orientation'] = 180.0
+      args['geometry_unit_aspect_ratio'] = 1.5
+      args['geometry_garage_width'] = 0.0
+      args['geometry_garage_depth'] = 20.0
+      args['geometry_garage_protrusion'] = 0.0
+      args['geometry_garage_position'] = 'Right'
+      args['geometry_foundation_type'] = HPXML::FoundationTypeBasementConditioned
+      args['geometry_foundation_height'] = 8.0
+      args['geometry_foundation_height_above_grade'] = 1.0
+      args['geometry_rim_joist_height'] = 9.25
+      args['geometry_roof_type'] = 'gable'
+      args['geometry_roof_pitch'] = '6:12'
+      args['geometry_attic_type'] = HPXML::AtticTypeUnvented
+      args['geometry_eaves_depth'] = 0
+      args['geometry_unit_num_bedrooms'] = 3
+      args['geometry_unit_num_bathrooms'] = 2
+      args['geometry_unit_num_occupants'] = 3
+      args['geometry_has_flue_or_chimney'] = Constants.Auto
+      args['floor_over_foundation_assembly_r'] = 0
+      args['floor_over_garage_assembly_r'] = 0
+      args['foundation_wall_insulation_r'] = 8.9
+      args['foundation_wall_insulation_distance_to_top'] = 0.0
+      args['foundation_wall_insulation_distance_to_bottom'] = 8.0
+      args['foundation_wall_thickness'] = 8.0
+      args['rim_joist_assembly_r'] = 23.0
+      args['slab_perimeter_insulation_r'] = 0
+      args['slab_perimeter_depth'] = 0
+      args['slab_under_insulation_r'] = 0
+      args['slab_under_width'] = 0
+      args['slab_thickness'] = 4.0
+      args['slab_carpet_fraction'] = 0.0
+      args['slab_carpet_r'] = 0.0
+      args['ceiling_assembly_r'] = 39.3
+      args['roof_material_type'] = HPXML::RoofTypeAsphaltShingles
+      args['roof_color'] = HPXML::ColorMedium
+      args['roof_assembly_r'] = 2.3
+      args['roof_radiant_barrier'] = false
+      args['roof_radiant_barrier_grade'] = 1
+      args['neighbor_front_distance'] = 0
+      args['neighbor_back_distance'] = 0
+      args['neighbor_left_distance'] = 0
+      args['neighbor_right_distance'] = 0
+      args['neighbor_front_height'] = Constants.Auto
+      args['neighbor_back_height'] = Constants.Auto
+      args['neighbor_left_height'] = Constants.Auto
+      args['neighbor_right_height'] = Constants.Auto
+      args['wall_type'] = HPXML::WallTypeWoodStud
+      args['wall_siding_type'] = HPXML::SidingTypeWood
+      args['wall_color'] = HPXML::ColorMedium
+      args['wall_assembly_r'] = 23
+      args['window_front_wwr'] = 0
+      args['window_back_wwr'] = 0
+      args['window_left_wwr'] = 0
+      args['window_right_wwr'] = 0
+      args['window_area_front'] = 108.0
+      args['window_area_back'] = 108.0
+      args['window_area_left'] = 72.0
+      args['window_area_right'] = 72.0
+      args['window_aspect_ratio'] = 1.333
+      args['window_fraction_operable'] = 0.67
+      args['window_ufactor'] = 0.33
+      args['window_shgc'] = 0.45
+      args['window_interior_shading_winter'] = 0.85
+      args['window_interior_shading_summer'] = 0.7
+      args['overhangs_front_depth'] = 0
+      args['overhangs_back_depth'] = 0
+      args['overhangs_left_depth'] = 0
+      args['overhangs_right_depth'] = 0
+      args['overhangs_front_distance_to_top_of_window'] = 0
+      args['overhangs_back_distance_to_top_of_window'] = 0
+      args['overhangs_left_distance_to_top_of_window'] = 0
+      args['overhangs_right_distance_to_top_of_window'] = 0
+      args['overhangs_front_distance_to_bottom_of_window'] = 0
+      args['overhangs_back_distance_to_bottom_of_window'] = 0
+      args['overhangs_left_distance_to_bottom_of_window'] = 0
+      args['overhangs_right_distance_to_bottom_of_window'] = 0
+      args['skylight_area_front'] = 0
+      args['skylight_area_back'] = 0
+      args['skylight_area_left'] = 0
+      args['skylight_area_right'] = 0
+      args['skylight_ufactor'] = 0.33
+      args['skylight_shgc'] = 0.45
+      args['door_area'] = 40.0
+      args['door_rvalue'] = 4.4
+      args['air_leakage_units'] = HPXML::UnitsACH
+      args['air_leakage_house_pressure'] = 50
+      args['air_leakage_value'] = 3
+      args['site_shielding_of_home'] = Constants.Auto
+      args['heating_system_type'] = HPXML::HVACTypeFurnace
+      args['heating_system_fuel'] = HPXML::FuelTypeNaturalGas
+      args['heating_system_heating_efficiency'] = 0.92
+      args['heating_system_heating_capacity'] = 36000.0
+      args['heating_system_fraction_heat_load_served'] = 1
+      args['cooling_system_type'] = HPXML::HVACTypeCentralAirConditioner
+      args['cooling_system_cooling_efficiency_type'] = HPXML::UnitsSEER
+      args['cooling_system_cooling_efficiency'] = 13.0
+      args['cooling_system_cooling_compressor_type'] = HPXML::HVACCompressorTypeSingleStage
+      args['cooling_system_cooling_sensible_heat_fraction'] = 0.73
+      args['cooling_system_cooling_capacity'] = 24000.0
+      args['cooling_system_fraction_cool_load_served'] = 1
+      args['cooling_system_is_ducted'] = false
+      args['heat_pump_type'] = 'none'
+      args['heat_pump_heating_efficiency_type'] = HPXML::UnitsHSPF
+      args['heat_pump_heating_efficiency'] = 7.7
+      args['heat_pump_cooling_efficiency_type'] = HPXML::UnitsSEER
+      args['heat_pump_cooling_efficiency'] = 13.0
+      args['heat_pump_cooling_compressor_type'] = HPXML::HVACCompressorTypeSingleStage
+      args['heat_pump_cooling_sensible_heat_fraction'] = 0.73
+      args['heat_pump_heating_capacity'] = 36000.0
+      args['heat_pump_heating_capacity_17_f'] = Constants.Auto
+      args['heat_pump_cooling_capacity'] = 36000.0
+      args['heat_pump_fraction_heat_load_served'] = 1
+      args['heat_pump_fraction_cool_load_served'] = 1
+      args['heat_pump_backup_type'] = HPXML::HeatPumpBackupTypeIntegrated
+      args['heat_pump_backup_fuel'] = HPXML::FuelTypeElectricity
+      args['heat_pump_backup_heating_efficiency'] = 1
+      args['heat_pump_backup_heating_capacity'] = 36000.0
+      args['hvac_control_type'] = HPXML::HVACControlTypeManual
+      args['hvac_control_heating_weekday_setpoint'] = 68
+      args['hvac_control_heating_weekend_setpoint'] = 68
+      args['hvac_control_cooling_weekday_setpoint'] = 78
+      args['hvac_control_cooling_weekend_setpoint'] = 78
+      args['ducts_leakage_units'] = HPXML::UnitsCFM25
+      args['ducts_supply_leakage_to_outside_value'] = 75.0
+      args['ducts_return_leakage_to_outside_value'] = 25.0
+      args['ducts_supply_insulation_r'] = 4.0
+      args['ducts_return_insulation_r'] = 0.0
+      args['ducts_supply_location'] = HPXML::LocationAtticUnvented
+      args['ducts_return_location'] = HPXML::LocationAtticUnvented
+      args['ducts_supply_surface_area'] = 150.0
+      args['ducts_return_surface_area'] = 50.0
+      args['ducts_number_of_return_registers'] = 2
+      args['heating_system_2_type'] = 'none'
+      args['heating_system_2_fuel'] = HPXML::FuelTypeElectricity
+      args['heating_system_2_heating_efficiency'] = 1.0
+      args['heating_system_2_heating_capacity'] = Constants.Auto
+      args['heating_system_2_fraction_heat_load_served'] = 0.25
+      args['mech_vent_fan_type'] = 'none'
+      args['mech_vent_flow_rate'] = 110
+      args['mech_vent_hours_in_operation'] = 24
+      args['mech_vent_recovery_efficiency_type'] = 'Unadjusted'
+      args['mech_vent_total_recovery_efficiency'] = 0.48
+      args['mech_vent_sensible_recovery_efficiency'] = 0.72
+      args['mech_vent_fan_power'] = 30
+      args['mech_vent_num_units_served'] = 1
+      args['mech_vent_2_fan_type'] = 'none'
+      args['mech_vent_2_flow_rate'] = 110
+      args['mech_vent_2_hours_in_operation'] = 24
+      args['mech_vent_2_recovery_efficiency_type'] = 'Unadjusted'
+      args['mech_vent_2_total_recovery_efficiency'] = 0.48
+      args['mech_vent_2_sensible_recovery_efficiency'] = 0.72
+      args['mech_vent_2_fan_power'] = 30
+      args['kitchen_fans_quantity'] = 0
+      args['bathroom_fans_quantity'] = 0
+      args['whole_house_fan_present'] = false
+      args['whole_house_fan_flow_rate'] = 4500
+      args['whole_house_fan_power'] = 300
+      args['water_heater_type'] = HPXML::WaterHeaterTypeStorage
+      args['water_heater_fuel_type'] = HPXML::FuelTypeElectricity
+      args['water_heater_location'] = HPXML::LocationLivingSpace
+      args['water_heater_tank_volume'] = 40
+      args['water_heater_efficiency_type'] = 'EnergyFactor'
+      args['water_heater_efficiency'] = 0.95
+      args['water_heater_recovery_efficiency'] = 0.76
+      args['water_heater_heating_capacity'] = 18767
+      args['water_heater_standby_loss'] = 0
+      args['water_heater_jacket_rvalue'] = 0
+      args['water_heater_setpoint_temperature'] = 125
+      args['water_heater_num_units_served'] = 1
+      args['hot_water_distribution_system_type'] = HPXML::DHWDistTypeStandard
+      args['hot_water_distribution_standard_piping_length'] = 50
+      args['hot_water_distribution_recirc_control_type'] = HPXML::DHWRecirControlTypeNone
+      args['hot_water_distribution_recirc_piping_length'] = 50
+      args['hot_water_distribution_recirc_branch_piping_length'] = 50
+      args['hot_water_distribution_recirc_pump_power'] = 50
+      args['hot_water_distribution_pipe_r'] = 0.0
+      args['dwhr_facilities_connected'] = 'none'
+      args['dwhr_equal_flow'] = true
+      args['dwhr_efficiency'] = 0.55
+      args['water_fixtures_shower_low_flow'] = true
+      args['water_fixtures_sink_low_flow'] = false
+      args['water_fixtures_usage_multiplier'] = 1.0
+      args['solar_thermal_system_type'] = 'none'
+      args['solar_thermal_collector_area'] = 40.0
+      args['solar_thermal_collector_loop_type'] = HPXML::SolarThermalLoopTypeDirect
+      args['solar_thermal_collector_type'] = HPXML::SolarThermalTypeEvacuatedTube
+      args['solar_thermal_collector_azimuth'] = 180
+      args['solar_thermal_collector_tilt'] = 20
+      args['solar_thermal_collector_rated_optical_efficiency'] = 0.5
+      args['solar_thermal_collector_rated_thermal_losses'] = 0.2799
+      args['solar_thermal_storage_volume'] = Constants.Auto
+      args['solar_thermal_solar_fraction'] = 0
+      args['pv_system_module_type'] = 'none'
+      args['pv_system_location'] = Constants.Auto
+      args['pv_system_tracking'] = Constants.Auto
+      args['pv_system_array_azimuth'] = 180
+      args['pv_system_array_tilt'] = 20
+      args['pv_system_max_power_output'] = 4000
+      args['pv_system_inverter_efficiency'] = 0.96
+      args['pv_system_system_losses_fraction'] = 0.14
+      args['pv_system_num_bedrooms_served'] = 3
+      args['pv_system_2_module_type'] = 'none'
+      args['pv_system_2_location'] = Constants.Auto
+      args['pv_system_2_tracking'] = Constants.Auto
+      args['pv_system_2_array_azimuth'] = 180
+      args['pv_system_2_array_tilt'] = 20
+      args['pv_system_2_max_power_output'] = 4000
+      args['lighting_interior_fraction_cfl'] = 0.4
+      args['lighting_interior_fraction_lfl'] = 0.1
+      args['lighting_interior_fraction_led'] = 0.25
+      args['lighting_interior_usage_multiplier'] = 1.0
+      args['lighting_exterior_fraction_cfl'] = 0.4
+      args['lighting_exterior_fraction_lfl'] = 0.1
+      args['lighting_exterior_fraction_led'] = 0.25
+      args['lighting_exterior_usage_multiplier'] = 1.0
+      args['lighting_garage_fraction_cfl'] = 0.4
+      args['lighting_garage_fraction_lfl'] = 0.1
+      args['lighting_garage_fraction_led'] = 0.25
+      args['lighting_garage_usage_multiplier'] = 1.0
+      args['holiday_lighting_present'] = false
+      args['holiday_lighting_daily_kwh'] = Constants.Auto
+      args['dehumidifier_type'] = 'none'
+      args['dehumidifier_efficiency_type'] = 'EnergyFactor'
+      args['dehumidifier_efficiency'] = 1.8
+      args['dehumidifier_capacity'] = 40
+      args['dehumidifier_rh_setpoint'] = 0.5
+      args['dehumidifier_fraction_dehumidification_load_served'] = 1
+      args['clothes_washer_location'] = HPXML::LocationLivingSpace
+      args['clothes_washer_efficiency_type'] = 'IntegratedModifiedEnergyFactor'
+      args['clothes_washer_efficiency'] = 1.21
+      args['clothes_washer_rated_annual_kwh'] = 380.0
+      args['clothes_washer_label_electric_rate'] = 0.12
+      args['clothes_washer_label_gas_rate'] = 1.09
+      args['clothes_washer_label_annual_gas_cost'] = 27.0
+      args['clothes_washer_label_usage'] = 6.0
+      args['clothes_washer_capacity'] = 3.2
+      args['clothes_washer_usage_multiplier'] = 1.0
+      args['clothes_dryer_location'] = HPXML::LocationLivingSpace
+      args['clothes_dryer_fuel_type'] = HPXML::FuelTypeElectricity
+      args['clothes_dryer_efficiency_type'] = 'CombinedEnergyFactor'
+      args['clothes_dryer_efficiency'] = 3.73
+      args['clothes_dryer_vented_flow_rate'] = 150.0
+      args['clothes_dryer_usage_multiplier'] = 1.0
+      args['dishwasher_location'] = HPXML::LocationLivingSpace
+      args['dishwasher_efficiency_type'] = 'RatedAnnualkWh'
+      args['dishwasher_efficiency'] = 307
+      args['dishwasher_label_electric_rate'] = 0.12
+      args['dishwasher_label_gas_rate'] = 1.09
+      args['dishwasher_label_annual_gas_cost'] = 22.32
+      args['dishwasher_label_usage'] = 4.0
+      args['dishwasher_place_setting_capacity'] = 12
+      args['dishwasher_usage_multiplier'] = 1.0
+      args['refrigerator_location'] = HPXML::LocationLivingSpace
+      args['refrigerator_rated_annual_kwh'] = 650.0
+      args['refrigerator_usage_multiplier'] = 1.0
+      args['extra_refrigerator_location'] = 'none'
+      args['extra_refrigerator_rated_annual_kwh'] = Constants.Auto
+      args['extra_refrigerator_usage_multiplier'] = 1.0
+      args['freezer_location'] = 'none'
+      args['freezer_rated_annual_kwh'] = Constants.Auto
+      args['freezer_usage_multiplier'] = 1.0
+      args['cooking_range_oven_location'] = HPXML::LocationLivingSpace
+      args['cooking_range_oven_fuel_type'] = HPXML::FuelTypeElectricity
+      args['cooking_range_oven_is_induction'] = false
+      args['cooking_range_oven_is_convection'] = false
+      args['cooking_range_oven_usage_multiplier'] = 1.0
+      args['ceiling_fan_present'] = false
+      args['ceiling_fan_efficiency'] = Constants.Auto
+      args['ceiling_fan_quantity'] = Constants.Auto
+      args['ceiling_fan_cooling_setpoint_temp_offset'] = 0
+      args['misc_plug_loads_television_present'] = true
+      args['misc_plug_loads_television_annual_kwh'] = 620.0
+      args['misc_plug_loads_television_usage_multiplier'] = 1.0
+      args['misc_plug_loads_other_annual_kwh'] = 2457.0
+      args['misc_plug_loads_other_frac_sensible'] = 0.855
+      args['misc_plug_loads_other_frac_latent'] = 0.045
+      args['misc_plug_loads_other_usage_multiplier'] = 1.0
+      args['misc_plug_loads_well_pump_present'] = false
+      args['misc_plug_loads_well_pump_annual_kwh'] = Constants.Auto
+      args['misc_plug_loads_well_pump_usage_multiplier'] = 0.0
+      args['misc_plug_loads_vehicle_present'] = false
+      args['misc_plug_loads_vehicle_annual_kwh'] = Constants.Auto
+      args['misc_plug_loads_vehicle_usage_multiplier'] = 0.0
+      args['misc_fuel_loads_grill_present'] = false
+      args['misc_fuel_loads_grill_fuel_type'] = HPXML::FuelTypeNaturalGas
+      args['misc_fuel_loads_grill_annual_therm'] = Constants.Auto
+      args['misc_fuel_loads_grill_usage_multiplier'] = 0.0
+      args['misc_fuel_loads_lighting_present'] = false
+      args['misc_fuel_loads_lighting_fuel_type'] = HPXML::FuelTypeNaturalGas
+      args['misc_fuel_loads_lighting_annual_therm'] = Constants.Auto
+      args['misc_fuel_loads_lighting_usage_multiplier'] = 0.0
+      args['misc_fuel_loads_fireplace_present'] = false
+      args['misc_fuel_loads_fireplace_fuel_type'] = HPXML::FuelTypeNaturalGas
+      args['misc_fuel_loads_fireplace_annual_therm'] = Constants.Auto
+      args['misc_fuel_loads_fireplace_frac_sensible'] = Constants.Auto
+      args['misc_fuel_loads_fireplace_frac_latent'] = Constants.Auto
+      args['misc_fuel_loads_fireplace_usage_multiplier'] = 0.0
+      args['pool_present'] = false
+      args['pool_pump_annual_kwh'] = Constants.Auto
+      args['pool_pump_usage_multiplier'] = 1.0
+      args['pool_heater_type'] = HPXML::HeaterTypeElectricResistance
+      args['pool_heater_annual_kwh'] = Constants.Auto
+      args['pool_heater_annual_therm'] = Constants.Auto
+      args['pool_heater_usage_multiplier'] = 1.0
+      args['hot_tub_present'] = false
+      args['hot_tub_pump_annual_kwh'] = Constants.Auto
+      args['hot_tub_pump_usage_multiplier'] = 1.0
+      args['hot_tub_heater_type'] = HPXML::HeaterTypeElectricResistance
+      args['hot_tub_heater_annual_kwh'] = Constants.Auto
+      args['hot_tub_heater_annual_therm'] = Constants.Auto
+      args['hot_tub_heater_usage_multiplier'] = 1.0
+    elsif ['base-sfa.xml'].include? hpxml_file
+      args['geometry_unit_type'] = HPXML::ResidentialTypeSFA
+      args['geometry_unit_cfa'] = 1800.0
+      args['geometry_building_num_units'] = 3
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['window_front_wwr'] = 0.18
+      args['window_back_wwr'] = 0.18
+      args['window_left_wwr'] = 0.18
+      args['window_right_wwr'] = 0.18
+      args['window_area_front'] = 0
+      args['window_area_back'] = 0
+      args['window_area_left'] = 0
+      args['window_area_right'] = 0
+    elsif ['base-mf.xml'].include? hpxml_file
+      args['geometry_unit_type'] = HPXML::ResidentialTypeApartment
+      args['geometry_unit_cfa'] = 900.0
+      args['geometry_foundation_type'] = HPXML::FoundationTypeBasementUnconditioned
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_building_num_units'] = 6
+      args['window_front_wwr'] = 0.18
+      args['window_back_wwr'] = 0.18
+      args['window_left_wwr'] = 0.18
+      args['window_right_wwr'] = 0.18
+      args['window_area_front'] = 0
+      args['window_area_back'] = 0
+      args['window_area_left'] = 0
+      args['window_area_right'] = 0
+      args['ducts_supply_leakage_to_outside_value'] = 0.0
+      args['ducts_return_leakage_to_outside_value'] = 0.0
+      args['ducts_supply_location'] = HPXML::LocationLivingSpace
+      args['ducts_return_location'] = HPXML::LocationLivingSpace
+      args['ducts_supply_insulation_r'] = 0.0
+      args['ducts_return_insulation_r'] = 0.0
+      args['ducts_number_of_return_registers'] = 1
+      args['door_area'] = 20.0
+    end
 
-    hpxml_objs = {
-      'Rakefile' => HPXML.new(hpxml_path: hpxml_path['Rakefile']),
-      'BuildResidentialHPXML' => HPXML.new(hpxml_path: hpxml_path['BuildResidentialHPXML'])
-    }
+    # Extras
+    if ['extra-auto.xml'].include? hpxml_file
+      args['geometry_unit_num_occupants'] = Constants.Auto
+      args['ducts_supply_location'] = Constants.Auto
+      args['ducts_return_location'] = Constants.Auto
+      args['ducts_supply_surface_area'] = Constants.Auto
+      args['ducts_return_surface_area'] = Constants.Auto
+      args['water_heater_location'] = Constants.Auto
+      args['water_heater_tank_volume'] = Constants.Auto
+      args['hot_water_distribution_standard_piping_length'] = Constants.Auto
+      args['clothes_washer_location'] = Constants.Auto
+      args['clothes_dryer_location'] = Constants.Auto
+      args['refrigerator_location'] = Constants.Auto
+    elsif ['extra-pv-roofpitch.xml'].include? hpxml_file
+      args['pv_system_module_type'] = HPXML::PVModuleTypeStandard
+      args['pv_system_2_module_type'] = HPXML::PVModuleTypeStandard
+      args['pv_system_array_tilt'] = 'roofpitch'
+      args['pv_system_2_array_tilt'] = 'roofpitch+15'
+    elsif ['extra-dhw-solar-latitude.xml'].include? hpxml_file
+      args['solar_thermal_system_type'] = HPXML::SolarThermalSystemType
+      args['solar_thermal_collector_tilt'] = 'latitude-15'
+    elsif ['extra-second-refrigerator.xml'].include? hpxml_file
+      args['extra_refrigerator_location'] = HPXML::LocationLivingSpace
+    elsif ['extra-second-heating-system-portable-heater-to-heating-system.xml'].include? hpxml_file
+      args['heating_system_fuel'] = HPXML::FuelTypeElectricity
+      args['heating_system_heating_capacity'] = 48000.0
+      args['heating_system_fraction_heat_load_served'] = 0.75
+      args['ducts_supply_leakage_to_outside_value'] = 0.0
+      args['ducts_return_leakage_to_outside_value'] = 0.0
+      args['ducts_supply_location'] = HPXML::LocationLivingSpace
+      args['ducts_return_location'] = HPXML::LocationLivingSpace
+      args['heating_system_2_type'] = HPXML::HVACTypePortableHeater
+      args['heating_system_2_heating_capacity'] = 16000.0
+    elsif ['extra-second-heating-system-fireplace-to-heating-system.xml'].include? hpxml_file
+      args['heating_system_type'] = HPXML::HVACTypeElectricResistance
+      args['heating_system_fuel'] = HPXML::FuelTypeElectricity
+      args['heating_system_heating_efficiency'] = 1.0
+      args['heating_system_heating_capacity'] = 48000.0
+      args['heating_system_fraction_heat_load_served'] = 0.75
+      args['cooling_system_type'] = 'none'
+      args['heating_system_2_type'] = HPXML::HVACTypeFireplace
+      args['heating_system_2_heating_capacity'] = 16000.0
+    elsif ['extra-second-heating-system-boiler-to-heating-system.xml'].include? hpxml_file
+      args['heating_system_type'] = HPXML::HVACTypeBoiler
+      args['heating_system_fraction_heat_load_served'] = 0.75
+      args['heating_system_2_type'] = HPXML::HVACTypeBoiler
+    elsif ['extra-second-heating-system-portable-heater-to-heat-pump.xml'].include? hpxml_file
+      args['heating_system_type'] = 'none'
+      args['cooling_system_type'] = 'none'
+      args['heat_pump_type'] = HPXML::HVACTypeHeatPumpAirToAir
+      args['heat_pump_heating_capacity_17_f'] = 22680.0
+      args['heat_pump_backup_type'] = HPXML::HeatPumpBackupTypeIntegrated
+      args['heat_pump_backup_fuel'] = HPXML::FuelTypeElectricity
+      args['heat_pump_heating_capacity'] = 48000.0
+      args['heat_pump_fraction_heat_load_served'] = 0.75
+      args['ducts_supply_leakage_to_outside_value'] = 0.0
+      args['ducts_return_leakage_to_outside_value'] = 0.0
+      args['ducts_supply_location'] = HPXML::LocationLivingSpace
+      args['ducts_return_location'] = HPXML::LocationLivingSpace
+      args['heating_system_2_type'] = HPXML::HVACTypePortableHeater
+      args['heating_system_2_heating_capacity'] = 16000.0
+    elsif ['extra-second-heating-system-fireplace-to-heat-pump.xml'].include? hpxml_file
+      args['heating_system_type'] = 'none'
+      args['cooling_system_type'] = 'none'
+      args['heat_pump_type'] = HPXML::HVACTypeHeatPumpMiniSplit
+      args['heat_pump_heating_efficiency'] = 10.0
+      args['heat_pump_cooling_efficiency'] = 19.0
+      args['heat_pump_heating_capacity'] = 48000.0
+      args['heat_pump_is_ducted'] = true
+      args['heat_pump_fraction_heat_load_served'] = 0.75
+      args['heating_system_2_type'] = HPXML::HVACTypeFireplace
+      args['heating_system_2_heating_capacity'] = 16000.0
+    elsif ['extra-second-heating-system-boiler-to-heat-pump.xml'].include? hpxml_file
+      args['heating_system_type'] = 'none'
+      args['cooling_system_type'] = 'none'
+      args['heat_pump_type'] = HPXML::HVACTypeHeatPumpGroundToAir
+      args['heat_pump_heating_efficiency_type'] = HPXML::UnitsCOP
+      args['heat_pump_heating_efficiency'] = 3.6
+      args['heat_pump_cooling_efficiency_type'] = HPXML::UnitsEER
+      args['heat_pump_cooling_efficiency'] = 16.6
+      args['heat_pump_backup_type'] = HPXML::HeatPumpBackupTypeIntegrated
+      args['heat_pump_backup_fuel'] = HPXML::FuelTypeElectricity
+      args['heat_pump_fraction_heat_load_served'] = 0.75
+      args['heating_system_2_type'] = HPXML::HVACTypeBoiler
+    elsif ['extra-enclosure-windows-shading.xml'].include? hpxml_file
+      args['window_interior_shading_winter'] = 0.99
+      args['window_interior_shading_summer'] = 0.01
+      args['window_exterior_shading_winter'] = 0.9
+      args['window_exterior_shading_summer'] = 0.1
+    elsif ['extra-enclosure-garage-partially-protruded.xml'].include? hpxml_file
+      args['geometry_garage_width'] = 12
+      args['geometry_garage_protrusion'] = 0.5
+    elsif ['extra-enclosure-garage-atticroof-conditioned.xml'].include? hpxml_file
+      args['geometry_garage_width'] = 30.0
+      args['geometry_garage_protrusion'] = 1.0
+      args['window_area_front'] = 12.0
+      args['window_aspect_ratio'] = 5.0 / 1.5
+      args['geometry_unit_cfa'] = 4500.0
+      args['geometry_unit_num_floors_above_grade'] = 2
+      args['geometry_attic_type'] = HPXML::AtticTypeConditioned
+      args['floor_over_garage_assembly_r'] = 39.3
+      args['ducts_supply_location'] = HPXML::LocationGarage
+      args['ducts_return_location'] = HPXML::LocationGarage
+    elsif ['extra-enclosure-atticroof-conditioned-eaves-gable.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeSlab
+      args['geometry_foundation_height'] = 0.0
+      args['geometry_foundation_height_above_grade'] = 0.0
+      args['foundation_wall_insulation_distance_to_bottom'] = Constants.Auto
+      args['geometry_unit_cfa'] = 4500.0
+      args['geometry_unit_num_floors_above_grade'] = 2
+      args['geometry_attic_type'] = HPXML::AtticTypeConditioned
+      args['geometry_eaves_depth'] = 2
+      args['ducts_supply_location'] = HPXML::LocationUnderSlab
+      args['ducts_return_location'] = HPXML::LocationUnderSlab
+    elsif ['extra-enclosure-atticroof-conditioned-eaves-hip.xml'].include? hpxml_file
+      args['geometry_roof_type'] = 'hip'
+    elsif ['extra-zero-refrigerator-kwh.xml'].include? hpxml_file
+      args['refrigerator_rated_annual_kwh'] = 0
+    elsif ['extra-zero-extra-refrigerator-kwh.xml'].include? hpxml_file
+      args['extra_refrigerator_rated_annual_kwh'] = 0
+    elsif ['extra-zero-freezer-kwh.xml'].include? hpxml_file
+      args['freezer_rated_annual_kwh'] = 0
+    elsif ['extra-zero-clothes-washer-kwh.xml'].include? hpxml_file
+      args['clothes_washer_rated_annual_kwh'] = 0
+      args['clothes_dryer_location'] = 'none'
+    elsif ['extra-zero-dishwasher-kwh.xml'].include? hpxml_file
+      args['dishwasher_efficiency'] = 0
+    elsif ['extra-sfa-atticroof-flat.xml'].include? hpxml_file
+      args['geometry_attic_type'] = HPXML::AtticTypeFlatRoof
+      args['ducts_supply_leakage_to_outside_value'] = 0.0
+      args['ducts_return_leakage_to_outside_value'] = 0.0
+      args['ducts_supply_location'] = HPXML::LocationBasementConditioned
+      args['ducts_return_location'] = HPXML::LocationBasementConditioned
+    elsif ['extra-gas-pool-heater-with-zero-kwh.xml'].include? hpxml_file
+      args['pool_present'] = true
+      args['pool_heater_type'] = HPXML::HeaterTypeGas
+      args['pool_heater_annual_kwh'] = 0
+    elsif ['extra-gas-hot-tub-heater-with-zero-kwh.xml'].include? hpxml_file
+      args['hot_tub_present'] = true
+      args['hot_tub_heater_type'] = HPXML::HeaterTypeGas
+      args['hot_tub_heater_annual_kwh'] = 0
+    elsif ['extra-no-rim-joists.xml'].include? hpxml_file
+      args.delete('geometry_rim_joist_height')
+      args.delete('rim_joist_assembly_r')
+    elsif ['extra-iecc-zone-different-than-epw.xml'].include? hpxml_file
+      args['site_iecc_zone'] = '6B'
+    elsif ['extra-state-code-different-than-epw.xml'].include? hpxml_file
+      args['site_state_code'] = 'WY'
+    elsif ['extra-sfa-atticroof-conditioned-eaves-gable.xml'].include? hpxml_file
+      args['geometry_unit_num_floors_above_grade'] = 2
+      args['geometry_attic_type'] = HPXML::AtticTypeConditioned
+      args['geometry_eaves_depth'] = 2
+      args['ducts_supply_location'] = HPXML::LocationLivingSpace
+      args['ducts_return_location'] = HPXML::LocationLivingSpace
+    elsif ['extra-sfa-atticroof-conditioned-eaves-hip.xml'].include? hpxml_file
+      args['geometry_roof_type'] = 'hip'
+    elsif ['extra-mf-eaves.xml'].include? hpxml_file
+      args['geometry_eaves_depth'] = 2
+    elsif ['extra-sfa-slab.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeSlab
+      args['geometry_foundation_height'] = 0.0
+      args['geometry_foundation_height_above_grade'] = 0.0
+      args['foundation_wall_insulation_distance_to_bottom'] = Constants.Auto
+    elsif ['extra-sfa-vented-crawlspace.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceVented
+      args['geometry_foundation_height'] = 4.0
+      args['floor_over_foundation_assembly_r'] = 18.7
+      args['foundation_wall_insulation_distance_to_bottom'] = 4.0
+    elsif ['extra-sfa-unvented-crawlspace.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceUnvented
+      args['geometry_foundation_height'] = 4.0
+      args['floor_over_foundation_assembly_r'] = 18.7
+      args['foundation_wall_insulation_distance_to_bottom'] = 4.0
+    elsif ['extra-sfa-conditioned-crawlspace.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceConditioned
+      args['geometry_foundation_height'] = 4.0
+      args['floor_over_foundation_assembly_r'] = 2.1
+      args['foundation_wall_insulation_distance_to_bottom'] = 4.0
+    elsif ['extra-sfa-unconditioned-basement.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeBasementUnconditioned
+      args['floor_over_foundation_assembly_r'] = 18.7
+      args['foundation_wall_insulation_r'] = 0
+      args['foundation_wall_insulation_distance_to_bottom'] = 0.0
+    elsif ['extra-sfa-rear-units.xml'].include? hpxml_file
+      args['geometry_building_num_units'] = 4
+    elsif ['extra-sfa-exterior-corridor.xml'].include? hpxml_file
+      args['geometry_building_num_units'] = 4
+    elsif ['extra-sfa-slab-middle.xml',
+           'extra-sfa-vented-crawlspace-middle.xml',
+           'extra-sfa-unvented-crawlspace-middle.xml',
+           'extra-sfa-unconditioned-basement-middle.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+    elsif ['extra-sfa-slab-right.xml',
+           'extra-sfa-vented-crawlspace-right.xml',
+           'extra-sfa-unvented-crawlspace-right.xml',
+           'extra-sfa-unconditioned-basement-right.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+    elsif ['extra-mf-slab.xml'].include? hpxml_file
+      args['geometry_building_num_units'] = 18
+      args['geometry_foundation_type'] = HPXML::FoundationTypeSlab
+      args['geometry_foundation_height'] = 0.0
+      args['geometry_foundation_height_above_grade'] = 0.0
+      args['foundation_wall_insulation_distance_to_bottom'] = Constants.Auto
+    elsif ['extra-mf-vented-crawlspace.xml'].include? hpxml_file
+      args['geometry_building_num_units'] = 18
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceVented
+      args['geometry_foundation_height'] = 4.0
+      args['floor_over_foundation_assembly_r'] = 18.7
+      args['foundation_wall_insulation_distance_to_bottom'] = 4.0
+    elsif ['extra-mf-unvented-crawlspace.xml'].include? hpxml_file
+      args['geometry_building_num_units'] = 18
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceUnvented
+      args['geometry_foundation_height'] = 4.0
+      args['floor_over_foundation_assembly_r'] = 18.7
+      args['foundation_wall_insulation_distance_to_bottom'] = 4.0
+    elsif ['extra-mf-rear-units.xml'].include? hpxml_file
+      args['geometry_building_num_units'] = 18
+    elsif ['extra-mf-exterior-corridor.xml'].include? hpxml_file
+      args['geometry_building_num_units'] = 18
+    elsif ['extra-mf-slab-left-bottom.xml',
+           'extra-mf-vented-crawlspace-left-bottom.xml',
+           'extra-mf-unvented-crawlspace-left-bottom.xml'].include? hpxml_file
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+    elsif ['extra-mf-slab-left-middle.xml',
+           'extra-mf-vented-crawlspace-left-middle.xml',
+           'extra-mf-unvented-crawlspace-left-middle.xml'].include? hpxml_file
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+    elsif ['extra-mf-slab-left-top.xml',
+           'extra-mf-vented-crawlspace-left-top.xml',
+           'extra-mf-unvented-crawlspace-left-top.xml'].include? hpxml_file
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+    elsif ['extra-mf-slab-middle-bottom.xml',
+           'extra-mf-vented-crawlspace-middle-bottom.xml',
+           'extra-mf-unvented-crawlspace-middle-bottom.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+    elsif ['extra-mf-slab-middle-middle.xml',
+           'extra-mf-vented-crawlspace-middle-middle.xml',
+           'extra-mf-unvented-crawlspace-middle-middle.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+    elsif ['extra-mf-slab-middle-top.xml',
+           'extra-mf-vented-crawlspace-middle-top.xml',
+           'extra-mf-unvented-crawlspace-middle-top.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+    elsif ['extra-mf-slab-right-bottom.xml',
+           'extra-mf-vented-crawlspace-right-bottom.xml',
+           'extra-mf-unvented-crawlspace-right-bottom.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+    elsif ['extra-mf-slab-right-middle.xml',
+           'extra-mf-vented-crawlspace-right-middle.xml',
+           'extra-mf-unvented-crawlspace-right-middle.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+    elsif ['extra-mf-slab-right-top.xml',
+           'extra-mf-vented-crawlspace-right-top.xml',
+           'extra-mf-unvented-crawlspace-right-top.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+    elsif ['extra-mf-slab-rear-units.xml',
+           'extra-mf-vented-crawlspace-rear-units.xml',
+           'extra-mf-unvented-crawlspace-rear-units.xml',
+           'extra-mf-slab-left-bottom-rear-units.xml',
+           'extra-mf-slab-left-middle-rear-units.xml',
+           'extra-mf-slab-left-top-rear-units.xml',
+           'extra-mf-slab-middle-bottom-rear-units.xml',
+           'extra-mf-slab-middle-middle-rear-units.xml',
+           'extra-mf-slab-middle-top-rear-units.xml',
+           'extra-mf-slab-right-bottom-rear-units.xml',
+           'extra-mf-slab-right-middle-rear-units.xml',
+           'extra-mf-slab-right-top-rear-units.xml',
+           'extra-mf-vented-crawlspace-left-bottom-rear-units.xml',
+           'extra-mf-vented-crawlspace-left-middle-rear-units.xml',
+           'extra-mf-vented-crawlspace-left-top-rear-units.xml',
+           'extra-mf-vented-crawlspace-middle-bottom-rear-units.xml',
+           'extra-mf-vented-crawlspace-middle-middle-rear-units.xml',
+           'extra-mf-vented-crawlspace-middle-top-rear-units.xml',
+           'extra-mf-vented-crawlspace-right-bottom-rear-units.xml',
+           'extra-mf-vented-crawlspace-right-middle-rear-units.xml',
+           'extra-mf-vented-crawlspace-right-top-rear-units.xml',
+           'extra-mf-unvented-crawlspace-left-bottom-rear-units.xml',
+           'extra-mf-unvented-crawlspace-left-middle-rear-units.xml',
+           'extra-mf-unvented-crawlspace-left-top-rear-units.xml',
+           'extra-mf-unvented-crawlspace-middle-bottom-rear-units.xml',
+           'extra-mf-unvented-crawlspace-middle-middle-rear-units.xml',
+           'extra-mf-unvented-crawlspace-middle-top-rear-units.xml',
+           'extra-mf-unvented-crawlspace-right-bottom-rear-units.xml',
+           'extra-mf-unvented-crawlspace-right-middle-rear-units.xml',
+           'extra-mf-unvented-crawlspace-right-top-rear-units.xml'].include? hpxml_file
+      args['geometry_unit_front_wall_is_adiabatic'] = true
+    end
 
-    hpxml_objs.each do |version, hpxml|
-      # Sort elements so we can diff them
-      hpxml.neighbor_buildings.sort_by! { |neighbor_building| neighbor_building.azimuth }
-      hpxml.roofs.sort_by! { |roof| roof.area }
-      hpxml.walls.sort_by! { |wall| [wall.exterior_adjacent_to, wall.insulation_assembly_r_value, wall.area] }
-      hpxml.foundation_walls.sort_by! { |foundation_wall| foundation_wall.area }
-      hpxml.rim_joists.sort_by! { |rim_joist| [rim_joist.exterior_adjacent_to, rim_joist.insulation_assembly_r_value, rim_joist.area] }
-      hpxml.frame_floors.sort_by! { |frame_floor| [frame_floor.insulation_assembly_r_value, frame_floor.area] }
-      hpxml.slabs.sort_by! { |slab| slab.area }
-      hpxml.windows.sort_by! { |window| [window.azimuth, window.area] }
-      hpxml.plug_loads.sort_by! { |plug_load| [plug_load.plug_load_type, plug_load.kWh_per_year] }
-
-      # Ignore elements that we aren't going to diff
-      hpxml.header.xml_type = nil
-      hpxml.header.xml_generated_by = nil
-      hpxml.header.created_date_and_time = Time.new(2000, 1, 1).strftime('%Y-%m-%dT%H:%M:%S%:z')
-      hpxml.header.schedules_path = nil
-      hpxml.site.fuels = [] # Not used by model
-      hpxml.climate_and_risk_zones.weather_station_name = nil
-      hpxml.building_construction.conditioned_building_volume = nil
-      hpxml.building_construction.average_ceiling_height = nil # Comparing conditioned volume instead
-      hpxml.air_infiltration_measurements[0].infiltration_volume = nil
-      hpxml.foundations.clear
-      hpxml.attics.clear
-      hpxml.foundation_walls.each do |foundation_wall|
-        next if foundation_wall.insulation_assembly_r_value.nil?
-        foundation_wall.insulation_assembly_r_value = foundation_wall.insulation_assembly_r_value.round(2)
-      end
-      if hpxml.rim_joists.length > 0
-        (0...hpxml.rim_joists.length).to_a.reverse.each do |i|
-          next unless [HPXML::LocationLivingSpace].include? hpxml.rim_joists[i].interior_adjacent_to
+    # Error
+    if ['error-heating-system-and-heat-pump.xml'].include? hpxml_file
+      args['cooling_system_type'] = 'none'
+      args['heat_pump_type'] = HPXML::HVACTypeHeatPumpAirToAir
+    elsif ['error-cooling-system-and-heat-pump.xml'].include? hpxml_file
+      args['heating_system_type'] = 'none'
+      args['heat_pump_type'] = HPXML::HVACTypeHeatPumpAirToAir
+    elsif ['error-non-integer-geometry-num-bathrooms.xml'].include? hpxml_file
+      args['geometry_unit_num_bathrooms'] = 1.5
+    elsif ['error-non-integer-ceiling-fan-quantity.xml'].include? hpxml_file
+      args['ceiling_fan_quantity'] = 0.5
+    elsif ['error-sfd-conditioned-basement-zero-foundation-height.xml'].include? hpxml_file
+      args['geometry_foundation_height'] = 0.0
+      args['foundation_wall_insulation_distance_to_bottom'] = Constants.Auto
+    elsif ['error-sfd-adiabatic-walls.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+    elsif ['error-sfa-ambient.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAmbient
+      args.delete('geometry_rim_joist_height')
+      args.delete('rim_joist_assembly_r')
+    elsif ['error-mf-conditioned-basement'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeBasementConditioned
+    elsif ['error-mf-conditioned-crawlspace'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceConditioned
+    elsif ['error-mf-bottom-crawlspace-zero-foundation-height.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceUnvented
+      args['geometry_foundation_height'] = 0.0
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+      args['foundation_wall_insulation_distance_to_bottom'] = Constants.Auto
+    elsif ['error-ducts-location-and-areas-not-same-type.xml'].include? hpxml_file
+      args['ducts_supply_location'] = Constants.Auto
+    elsif ['error-second-heating-system-serves-total-heat-load.xml'].include? hpxml_file
+      args['heating_system_2_type'] = HPXML::HVACTypeFireplace
+      args['heating_system_2_fraction_heat_load_served'] = 1.0
+    elsif ['error-second-heating-system-but-no-primary-heating.xml'].include? hpxml_file
+      args['heating_system_type'] = 'none'
+      args['heating_system_2_type'] = HPXML::HVACTypeFireplace
+    elsif ['error-sfa-no-building-num-units.xml'].include? hpxml_file
+      args.delete('geometry_building_num_units')
+    elsif ['error-sfa-above-apartment.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeAboveApartment
+    elsif ['error-sfa-below-apartment.xml'].include? hpxml_file
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+    elsif ['error-sfa-all-adiabatic-walls.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_unit_front_wall_is_adiabatic'] = true
+      args['geometry_unit_back_wall_is_adiabatic'] = true
+    elsif ['error-mf-no-building-num-units.xml'].include? hpxml_file
+      args.delete('geometry_building_num_units')
+    elsif ['error-mf-all-adiabatic-walls.xml'].include? hpxml_file
+      args['geometry_unit_left_wall_is_adiabatic'] = true
+      args['geometry_unit_right_wall_is_adiabatic'] = true
+      args['geometry_unit_front_wall_is_adiabatic'] = true
+      args['geometry_unit_back_wall_is_adiabatic'] = true
+    elsif ['error-mf-two-stories.xml'].include? hpxml_file
+      args['geometry_unit_num_floors_above_grade'] = 2
+    elsif ['error-dhw-indirect-without-boiler.xml'].include? hpxml_file
+      args['water_heater_type'] = HPXML::WaterHeaterTypeCombiStorage
+    elsif ['error-conditioned-attic-with-one-floor-above-grade.xml'].include? hpxml_file
+      args['geometry_attic_type'] = HPXML::AtticTypeConditioned
+      args['ceiling_assembly_r'] = 0.0
+    elsif ['error-zero-number-of-bedrooms.xml'].include? hpxml_file
+      args['geometry_unit_num_bedrooms'] = 0
+    elsif ['error-sfd-with-shared-system.xml'].include? hpxml_file
+      args['heating_system_type'] = "Shared #{HPXML::HVACTypeBoiler} w/ Baseboard"
+    elsif ['error-rim-joist-height-but-no-assembly-r.xml'].include? hpxml_file
+      args.delete('rim_joist_assembly_r')
+    elsif ['error-rim-joist-assembly-r-but-no-height.xml'].include? hpxml_file
+      args.delete('geometry_rim_joist_height')
+    end
 
-          hpxml.rim_joists.delete_at(i)
-        end
-      end
-      hpxml.rim_joists.each do |rim_joist|
-        rim_joist.area = rim_joist.area.round
-        rim_joist.insulation_assembly_r_value = rim_joist.insulation_assembly_r_value.round(2)
-        rim_joist.solar_absorptance = nil
-        rim_joist.emittance = nil
-        rim_joist.color = nil
-      end
-      hpxml.roofs.each do |roof|
-        roof.azimuth = nil
-        roof.radiant_barrier = nil
-        roof.solar_absorptance = nil
-        roof.emittance = nil
-        roof.roof_color = nil
-      end
-      hpxml.walls.each do |wall|
-        wall.azimuth = nil
-        wall.solar_absorptance = nil
-        wall.emittance = nil
-        wall.color = nil
-        next if wall.exterior_adjacent_to != HPXML::LocationOutside
-        next unless [HPXML::LocationAtticUnvented, HPXML::LocationAtticVented].include? wall.interior_adjacent_to
-
-        wall.area = nil # TODO: Attic gable wall areas
-      end
-      hpxml.windows.each do |window|
-        window.area = window.area.round
-        window.overhangs_distance_to_bottom_of_window = nil # TODO: Height of windows
-      end
-      hpxml.doors.each do |door|
-        door.azimuth = nil # Not important
-        if door.id.include?('Garage')
-          door.delete
-        end
-      end
-      hpxml.heating_systems.each do |heating_system|
-        heating_system.electric_auxiliary_energy = nil # Detailed input not offered
-        heating_system.fan_watts = nil # Detailed input not offered
-        heating_system.fan_watts_per_cfm = nil # Detailed input not offered
-        heating_system.shared_loop_watts = nil # Always defaulted
-        heating_system.fan_coil_watts = nil # Always defaulted
-      end
-      hpxml.cooling_systems.each do |cooling_system|
-        cooling_system.fan_watts_per_cfm = nil # Detailed input not offered
-      end
-      hpxml.heat_pumps.each do |heat_pump|
-        heat_pump.fan_watts_per_cfm = nil # Detailed input not offered
-        heat_pump.pump_watts_per_ton = nil # Detailed input not offered
-        next if heat_pump.backup_heating_efficiency_afue.nil?
-
-        # These are treated the same in the model, so allow AFUE/percent comparison
-        heat_pump.backup_heating_efficiency_percent = heat_pump.backup_heating_efficiency_afue
-        heat_pump.backup_heating_efficiency_afue = nil
-      end
-      hpxml.ventilation_fans.each do |ventilation_fan|
-        next unless ventilation_fan.used_for_whole_building_ventilation
-        next if ventilation_fan.tested_flow_rate.nil?
+    # Warning
+    if ['warning-non-electric-heat-pump-water-heater.xml'].include? hpxml_file
+      args['water_heater_type'] = HPXML::WaterHeaterTypeHeatPump
+      args['water_heater_fuel_type'] = HPXML::FuelTypeNaturalGas
+      args['water_heater_efficiency'] = 2.3
+    elsif ['warning-sfd-slab-non-zero-foundation-height.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeSlab
+      args['geometry_foundation_height_above_grade'] = 0.0
+    elsif ['warning-mf-bottom-slab-non-zero-foundation-height.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeSlab
+      args['geometry_foundation_height_above_grade'] = 0.0
+      args['geometry_attic_type'] = HPXML::AtticTypeBelowApartment
+    elsif ['warning-slab-non-zero-foundation-height-above-grade.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeSlab
+      args['geometry_foundation_height'] = 0.0
+      args['foundation_wall_insulation_distance_to_bottom'] = Constants.Auto
+    elsif ['warning-second-heating-system-serves-majority-heat.xml'].include? hpxml_file
+      args['heating_system_fraction_heat_load_served'] = 0.4
+      args['heating_system_2_type'] = HPXML::HVACTypeFireplace
+      args['heating_system_2_fraction_heat_load_served'] = 0.6
+    elsif ['warning-vented-crawlspace-with-wall-and-ceiling-insulation.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceVented
+      args['geometry_foundation_height'] = 3.0
+      args['floor_over_foundation_assembly_r'] = 10
+      args['foundation_wall_insulation_distance_to_bottom'] = 0.0
+      args['foundation_wall_assembly_r'] = 10
+    elsif ['warning-unvented-crawlspace-with-wall-and-ceiling-insulation.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeCrawlspaceUnvented
+      args['geometry_foundation_height'] = 3.0
+      args['floor_over_foundation_assembly_r'] = 10
+      args['foundation_wall_insulation_distance_to_bottom'] = 0.0
+      args['foundation_wall_assembly_r'] = 10
+    elsif ['warning-unconditioned-basement-with-wall-and-ceiling-insulation.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeBasementUnconditioned
+      args['floor_over_foundation_assembly_r'] = 10
+      args['foundation_wall_assembly_r'] = 10
+    elsif ['warning-vented-attic-with-floor-and-roof-insulation.xml'].include? hpxml_file
+      args['geometry_attic_type'] = HPXML::AtticTypeVented
+      args['roof_assembly_r'] = 10
+      args['ducts_supply_location'] = HPXML::LocationAtticVented
+      args['ducts_return_location'] = HPXML::LocationAtticVented
+    elsif ['warning-unvented-attic-with-floor-and-roof-insulation.xml'].include? hpxml_file
+      args['geometry_attic_type'] = HPXML::AtticTypeUnvented
+      args['roof_assembly_r'] = 10
+    elsif ['warning-conditioned-basement-with-ceiling-insulation.xml'].include? hpxml_file
+      args['geometry_foundation_type'] = HPXML::FoundationTypeBasementConditioned
+      args['floor_over_foundation_assembly_r'] = 10
+    elsif ['warning-conditioned-attic-with-floor-insulation.xml'].include? hpxml_file
+      args['geometry_unit_num_floors_above_grade'] = 2
+      args['geometry_attic_type'] = HPXML::AtticTypeConditioned
+      args['ducts_supply_location'] = HPXML::LocationLivingSpace
+      args['ducts_return_location'] = HPXML::LocationLivingSpace
+    elsif ['warning-multipliers-without-tv-plug-loads.xml'].include? hpxml_file
+      args['misc_plug_loads_television_annual_kwh'] = 0.0
+    elsif ['warning-multipliers-without-other-plug-loads.xml'].include? hpxml_file
+      args['misc_plug_loads_other_annual_kwh'] = 0.0
+    elsif ['warning-multipliers-without-well-pump-plug-loads.xml'].include? hpxml_file
+      args['misc_plug_loads_well_pump_annual_kwh'] = 0.0
+      args['misc_plug_loads_well_pump_usage_multiplier'] = 1.0
+    elsif ['warning-multipliers-without-vehicle-plug-loads.xml'].include? hpxml_file
+      args['misc_plug_loads_vehicle_annual_kwh'] = 0.0
+      args['misc_plug_loads_vehicle_usage_multiplier'] = 1.0
+    elsif ['warning-multipliers-without-fuel-loads.xml'].include? hpxml_file
+      args['misc_fuel_loads_grill_usage_multiplier'] = 1.0
+      args['misc_fuel_loads_lighting_usage_multiplier'] = 1.0
+      args['misc_fuel_loads_fireplace_usage_multiplier'] = 1.0
+    end
+  end
 
-        # These are treated the same in the model, so allow tested/rated comparison
-        ventilation_fan.rated_flow_rate = ventilation_fan.tested_flow_rate
-        ventilation_fan.tested_flow_rate = nil
-      end
-      hpxml.hvac_controls.each do |hvac_control|
-        hvac_control.control_type = nil # Not used by model
-      end
-      if hpxml.hvac_distributions.length > 0
-        (2..hpxml.hvac_distributions[0].ducts.length).to_a.reverse.each do |i|
-          hpxml.hvac_distributions[0].ducts.delete_at(i) # Only compare first two ducts
-        end
-      end
-      hpxml.water_heating_systems.each do |wh|
-        wh.performance_adjustment = nil # Detailed input not exposed
-        wh.heating_capacity = nil # Detailed input not exposed
-      end
-      if hpxml.refrigerators.length > 0
-        (2..hpxml.refrigerators.length).to_a.reverse.each do |i|
-          hpxml.refrigerators.delete_at(i) # Only compare first two refrigerators
-        end
-      end
-      hpxml.refrigerators.each do |refrigerator|
-        refrigerator.primary_indicator = nil
-        refrigerator.adjusted_annual_kwh = nil
-        refrigerator.weekday_fractions = nil
-        refrigerator.weekend_fractions = nil
-        refrigerator.monthly_multipliers = nil
-      end
-      if hpxml.freezers.length > 0
-        (1..hpxml.freezers.length).to_a.reverse.each do |i|
-          hpxml.freezers.delete_at(i) # Only compare first freezer
-        end
-      end
-      hpxml.freezers.each do |freezer|
-        freezer.weekday_fractions = nil
-        freezer.weekend_fractions = nil
-        freezer.monthly_multipliers = nil
-      end
-      hpxml.cooking_ranges.each do |cooking_range|
-        cooking_range.weekday_fractions = nil
-        cooking_range.weekend_fractions = nil
-        cooking_range.monthly_multipliers = nil
-      end
-      hpxml.pools.each do |pool|
-        pool.pump_weekday_fractions = nil
-        pool.pump_weekend_fractions = nil
-        pool.pump_monthly_multipliers = nil
-        pool.heater_weekday_fractions = nil
-        pool.heater_weekend_fractions = nil
-        pool.heater_monthly_multipliers = nil
-      end
-      hpxml.hot_tubs.each do |hot_tub|
-        hot_tub.pump_weekday_fractions = nil
-        hot_tub.pump_weekend_fractions = nil
-        hot_tub.pump_monthly_multipliers = nil
-        hot_tub.heater_weekday_fractions = nil
-        hot_tub.heater_weekend_fractions = nil
-        hot_tub.heater_monthly_multipliers = nil
-      end
-      hpxml.lighting.interior_weekday_fractions = nil
-      hpxml.lighting.interior_weekend_fractions = nil
-      hpxml.lighting.interior_monthly_multipliers = nil
-      hpxml.lighting.exterior_weekday_fractions = nil
-      hpxml.lighting.exterior_weekend_fractions = nil
-      hpxml.lighting.exterior_monthly_multipliers = nil
-      hpxml.lighting.garage_weekday_fractions = nil
-      hpxml.lighting.garage_weekend_fractions = nil
-      hpxml.lighting.garage_monthly_multipliers = nil
-      hpxml.lighting.holiday_weekday_fractions = nil
-      hpxml.lighting.holiday_weekend_fractions = nil
-      hpxml.plug_loads.each do |plug_load|
-        plug_load.weekday_fractions = nil
-        plug_load.weekend_fractions = nil
-        plug_load.monthly_multipliers = nil
-      end
-      hpxml.fuel_loads.each do |fuel_load|
-        fuel_load.weekday_fractions = nil
-        fuel_load.weekend_fractions = nil
-        fuel_load.monthly_multipliers = nil
-      end
-      hpxml.pv_systems.each do |pv_system|
-        pv_system.year_modules_manufactured = nil
-      end
-      hpxml.collapse_enclosure_surfaces()
+  def _test_measure(args_hash, expected_error, expected_warning)
+    # create an instance of the measure
+    measure = BuildResidentialHPXML.new
 
-      # Replace IDs/IDREFs with blank strings
-      HPXML::HPXML_ATTRS.each do |attr|
-        hpxml_obj = hpxml.send(attr)
-        next unless hpxml_obj.is_a? HPXML::BaseArrayElement
+    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
+    model = OpenStudio::Model::Model.new
 
-        hpxml_obj.each do |obj|
-          obj.class::ATTRS.each do |obj_attr|
-            next unless obj_attr.to_s.end_with?('id') || obj_attr.to_s.end_with?('_idref')
+    # get arguments
+    arguments = measure.arguments(model)
+    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
 
-            obj.send(obj_attr.to_s + '=', '')
-          end
+    # populate argument with specified hash value if specified
+    arguments.each do |arg|
+      temp_arg_var = arg.clone
+      if args_hash.has_key?(arg.name)
+        retval = temp_arg_var.setValue(args_hash[arg.name])
+        if not retval # Try passing as string instead
+          assert(temp_arg_var.setValue(args_hash[arg.name].to_s))
         end
       end
+      argument_map[arg.name] = temp_arg_var
     end
+    args_hash.keys.each do |arg_name|
+      next if argument_map.keys.include? arg_name
 
-    rakefile_doc = hpxml_objs['Rakefile'].to_oga()
-    measure_doc = hpxml_objs['BuildResidentialHPXML'].to_oga()
-
-    # Write files for inspection?
-    if rakefile_doc.to_xml != measure_doc.to_xml
-      rakefile_path = File.join(File.dirname(__FILE__), 'test_rakefile.xml')
-      XMLHelper.write_file(rakefile_doc, rakefile_path)
-      measure_path = File.join(File.dirname(__FILE__), 'test_measure.xml')
-      XMLHelper.write_file(measure_doc, measure_path)
-      flunk "ERROR: HPXML files don't match. Wrote #{rakefile_path} and #{measure_path} for inspection."
-    else
-      pass
+      fail "Unexpected argument name: #{arg_name}"
     end
-  end
 
-  def _setup(this_dir)
-    rundir = File.join(this_dir, 'run')
-    _rm_path(rundir)
-    Dir.mkdir(rundir)
-  end
+    # run the measure
+    measure.run(model, runner, argument_map)
+    result = runner.result
 
-  def _rm_path(path)
-    if Dir.exist?(path)
-      FileUtils.rm_r(path)
+    # assert whether it ran correctly
+    if expected_error.nil?
+      # show the output
+      show_output(result) unless result.value.valueName == 'Success'
+
+      assert_equal('Success', result.value.valueName)
+      assert(File.exist?(args_hash['hpxml_path']))
+    else
+      assert_equal('Fail', result.value.valueName)
+      assert(!File.exist?(args_hash['hpxml_path']))
     end
-    while true
-      break if not Dir.exist?(path)
 
-      sleep(0.01)
+    # check warnings/errors
+    if not expected_error.nil?
+      if runner.result.stepErrors.select { |s| s == expected_error }.size <= 0
+        runner.result.stepErrors.each do |s|
+          puts "ERROR: #{s}"
+        end
+      end
+      assert(runner.result.stepErrors.select { |s| s == expected_error }.size > 0)
+    end
+    if not expected_warning.nil?
+      if runner.result.stepWarnings.select { |s| s == expected_warning }.size <= 0
+        runner.result.stepErrors.each do |s|
+          puts "WARNING: #{s}"
+        end
+      end
+      assert(runner.result.stepWarnings.select { |s| s == expected_warning }.size > 0)
     end
   end
 end