tesseract_bin 1.0.0

data/vendor/tesseract-2.04/README

@@ -0,0 +1,138 @@
+Note that this is a text-only and possibly out-of-date version of the 
+wiki ReadMe, which is located at:
+ http://code.google.com/p/tesseract-ocr/wiki/ReadMe
+
+Introduction
+============
+This package contains the Tesseract Open Source OCR Engine.
+Orignally developed at Hewlett Packard Laboratories Bristol and
+at Hewlett Packard Co, Greeley Colorado, all the code
+in this distribution is now licensed under the Apache License:
+
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+** http://www.apache.org/licenses/LICENSE-2.0
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+
+
+Other Dependencies and Licenses:
+================================
+The Aspirin/MIGRAINES system is no longer required.
+
+Tesseract can also make use of the libtiff library. (www.libtiff.org) See
+http://code.google.com/p/tesseract-ocr/wiki/FAQ for details.
+Without libtiff, Tesseract can only read uncompressed and G3 compressed
+TIFF files.
+
+Installing and Running Tesseract
+All Users Do NOT Ignore!
+The tarballs are split into pieces.
+
+tesseract-2.04.tar.gz contains all the source code.
+
+tesseract-2.00.<lang>.tar.gz contains the language data files for <lang>. You need at least one of these or tesseract will not work.
+
+Note that tesseract-2.04.tar.gz unpacks to the tesseract-2.04 directory. tesseract-2.00.<lang>.tar.gz unpacks to the tessdata directory which belongs inside your tesseract-2.04 directory. It is therefore best to download them into your tesseract-2.04 directory, so you can use unpack here or equivalent. You can unpack as many of the language packs as you care to, as they all contain different files. Note that if you are using make install you should unpack your language data to your source tree before you run make install. If you unpack them as root to the destination directory of make install, then the user ids and access permissions might be messed up.
+
+boxtiff-2.01.<lang>.tar.gz contains data that was used in training for those that want to do their own training. Most users should NOT download these files.
+
+Instructions for using the training tools are documented separately at TrainingTesseract and for testing at TestingTesseract. 
+
+Without Additional Libraries, Image format support is limited!
+
+Without additional libraries, Tesseract can only read uncompressed TIFF. (And some versions of BMP) Upto version 2.04, you can add libtiff-dev. See the FAQ question on compressed TIFF for installation instructions. Version 3.00 will support additional formats via Leptonica, but requires more libraries to be added.
+Windows:
+
+There is no windows installer! (Still looking for volunteers to create one.) There are windows executables: tesseract-2.04.exe.tar.gz (It is not for the 'exe' language.) They are built with VC++ express 2008 and come with absolutely no warranty. If they work for you then great, otherwise get Visual C++ Express 2008 with service pack 1 and build from the source. You can also try tesseract-2.01.exe.tar.gz, which is built with VC++6, and may work better if your windows is old, but note that this is an older version of Tesseract.
+
+If you are building from the sources, there are still (up to v2.04) .dsw and .dsp files for vc++6, but the recommended build platform is now VC++ Express 2008. There are also .sln and .vcproj files for VC++ Express 2008, but these files are not backward compatible with any previous version - not even VC++ Express 2005. Note that the executables produced with the newer compiler are smaller, faster, and, believe it or not, more accurate. (See TestingTesseract.)
+
+New with 2.04: the executables are built with static linking, so they stand more chance of working out of the box on more windows systems.
+
+The executable must reside in the same directory as the tessdata directory. (The Visual Studio projects build the release executable directly to the correct place!)
+
+The command line is:
+
+tesseract <image.tif> <output> [-l <langid>]
+
+For interfacing to other applications, there is a DLL included with the executables, but you may be better off building it yourself. The DLL is NOT built for static C-Runtime, so you will probably need VC++ Express 2008 to run it.
+
+The dll has been updated to allow input of non-binary images. (Thanks to Glen of Jetsoft.)
+
+Non-Windows (or Cygwin):
+
+You have to tell Tesseract through a standard unix mechanism where to find its data directory. You must either:
+
+./configure
+make
+make install
+
+to move the data files to the standard place, or:
+
+export TESSDATA_PREFIX="directory in which your tessdata resides/"
+
+In either case the command line is:
+
+tesseract <image.tif> <output> [-l <langid>]
+
+New there is a tesseract.spec for making rpms. (Thanks to Andrew Ziem for the help.) It might work with your OS if you know how to do that.
+
+If you are linking to the libraries, as Ocropus does, there is now a single master library called libtesseract_full.a.
+
+Libtiff support should now be properly working via configure, but note that you need libtiff-dev, as that contains the header files required to compile the code that uses it. 
+
+History:
+========
+The engine was developed at Hewlett Packard Laboratories Bristol and
+at Hewlett Packard Co, Greeley Colorado between 1985 and 1994, with some
+more changes made in 1996 to port to Windows, and some C++izing in 1998.
+A lot of the code was written in C, and then some more was written in C++.
+Since then all the code has been converted to at least compile with a C++
+compiler. Currently it builds under Linux with gcc2.95 and under Windows
+with VC++6. The C++ code makes heavy use of a list system using macros.
+This predates stl, was portable before stl, and is more efficent than stl
+lists, but has the big negative that if you do get a segmentation violation,
+it is hard to debug. Another "feature" of the C/C++ split is that the C++
+data structures get converted to C data structures to call the low-level C
+code. This is ugly, and the C++izing of the C code is a step towards
+eliminating the conversion, but it has not happened yet.
+
+The most recent change is that Tesseract can now recognize 6 languages, is fully UTF8 capable, and is fully trainable. See TrainingTesseract for more information on training.
+
+Tesseract was included in UNLV's Fourth Annual Test of OCR Accuracy. See http://www.isri.unlv.edu/downloads/AT-1995.pdf. With Tesseract 2.00, scripts are now included to allow anyone to reproduce some of these tests. See TestingTesseract for more details. 
+
+
+Directory Structure (ordered by dependency):
+============================================
+ccmain     Top-level code. The main program resides in tesseractmain.cpp.
+display    An "editor" to view and operate on the internal structures.
+           (Requires a working viewer - batteries not included.)
+wordrec    The word-level recognizer.
+textord    The module that organizes(orders) text into lines and words.
+classify   The low-level character classifiers.
+ccstruct   Classes to hold information about a page as it is being processed.
+viewer     The client side of a client server viewing system.
+           Unfortunately, at this time, the server side is not available.
+image      Image class and processing functions.
+dict       Language model code.
+cutil      Code for file I/O, lists, heaps etc, from the old C code.
+ccutil     Somewhat newer code for lists, memory allocation etc from the
+           old C++ code.
+
+
+About the Engine
+================
+This code is a raw OCR engine. It has NO PAGE LAYOUT ANALYSIS, NO OUTPUT
+FORMATTING, and NO UI. It can only process an image of a single column
+and create text from it. It can detect fixed pitch vs proportional text.
+Having said that, in 1995, this engine was in the top 3 in terms of character
+accuracy, and it compiles and runs on both Linux and Windows.
+As of 2.0, Tesseract is fully unicode (UTF-8) enabled, and can recognize 6
+languages "out of the box." Code and documentation is provided for the brave
+to train in other languages. See code.google.com/p/tesseract-ocr for more
+information on training.

data/vendor/tesseract-2.04/ReleaseNotes

@@ -0,0 +1,213 @@
+Tesseract release notes June 30 2009 - V2.04
+Integrated patches for portability and to remove some of the
+"access" macros.
+Removed dependence on lua from the viewer making it a *lot*
+faster. Also the viewer now compiles and works (on Linux.)
+Fixed the following issues:
+1, 63, 67, 71, 76, 79, 81, 82, 84, 106, 108, 111, 112, 128, 129, 130, 133, 135,
+142, 143, 145, 146, 147, 153, 154, 160, 165, 169, 170, 175, 177, 187, 192,
+195, 199, 201, 205, 209.
+This is the last version to support VC++6!
+This may also be the last version to compile without leptonica!
+Windows version now outputs to stderr by default, fixing a lot of the problems with lack of visible meaningful error messages.
+
+Tesseract release notes April 22 2008 - V2.03
+2.02 was unrunnable, due to a last-minute "simple" change.
+2.03 fixes the problem and also adds an include check for leptonica
+to make it more usable.
+
+Tesseract release notes April 21 2008 - V2.02
+Improvements to clustering, training and classifier.
+Major internationalization improvements for large-character-set
+languages, eg Kannada.
+Removed some compiler warnings.
+Added multipage tiff support for training and running.
+Updated graphics output to talk to new java-based viewer.
+Added ability to save n-best lists.
+Added leptonica support for more file types.
+Improved Init/End to make them safe.
+Reduced memory use of dictionaries.
+Added some new APIs to TessBaseAPI.
+Fixed namespace collisions with jpeg library (INT32).
+Portability fixes for Windows for new code.
+Updates to autoconf system for new code.
+
+Tesseract release notes August 27 2007 - V2.01
+Fixed UTF8 input problems with box file reader.
+Fixed various infinite loops and crashes in dawg code.
+Removed include of config_auto.h from host.h.
+Added automatic wctype encoding to unicharset_extractor.
+Fixed dawg table too full error.
+Removed svn files from tarball.
+Added new functions to tessdll.
+Increased maximum utf8 string in a classification result to 8.
+
+Tesseract release notes July 17, 2007 - V2.00
+
+First release of the International version.
+This version recognizes the following languages:
+English - eng
+French  - fra
+Italian - ita
+German  - deu
+Spanish - spa
+Dutch   - nld
+The language codes follow ISO 639-2. The default language is English.
+To recognize another language:
+tesseract inputimage outputbase -l langcode
+
+To train on a new language, see separate documentation.
+More languages will be appearing over time.
+
+List of changes in this release:
+  Converted internal character handling to UTF8.
+  Trained with 6 languages.
+  Added unicharset_extractor, wordlist2dawg.
+  Added boxfile creation mode.
+  Added UNLV regression test capability.
+  Fixed problems with copyright and registered symbols.
+  Fixed extern "C" declarations problem.
+  Made some improvements to consistency of accuracy across platforms.
+  Added vc++ express support.
+
+Instructions for downloading and building version 2.00.
+Things have changed quite a bit since the previous versions so please read carefully.
+*All users*
+The tarballs are split into pieces.
+tesseract-2.00.tar.gz contains all the source code.
+tesseract-2.00.<lang>.tar.gt contains the data files for <lang>. You need at least one of these or tesseract will not work.
+tesseract-2.00.exe.tar.gz is not for the 'exe' language. It is windows executables. They are built with VC++ express and come with absolutely no warranty. If they work for you then great, otherwise get visual C++ express (and the platform sdk) and build from the source.
+
+*Non-windows users*
+As with 1.04, this version works with make install.
+*New* there is a tesseract.spec for making rpms. (Thanks to Andrew Ziem for the help.)
+It might work with your OS if you know how to do that sort of thing.
+If you are linking to the libraries, as with Ocropus, there is now a single master
+library called libtesseract_full.a.
+
+*Windows users*
+If you are building from the sources, there are still dsw and dsp files for vc++6 and also
+sln and vcproj files for vc++ express.
+The dll has been updated to allow input of non-binary images. (Thanks to Glen of Jetsoft.)
+
+
+Tesseract release notes May 15, 2007 - V1.04.
+
+=== Windows users only ===
+Added a dll interface for windows. Thanks to Glen at Jetsoft for contributing
+this. To use the dll, include tessdll.h, import tessdll.lib and put tessdll.dll
+somewhere where the system can find it. There is also a small dlltest program
+to test the dll. Run with:
+dlltest phototest.tif phototest.txt
+It will output the text from phototest.tif with bounding box information.
+**New for Windows** the distribution now includes tesseract.exe and tessdll.dll
+which *might* work out of the box! There are no guarantees as you need
+VC++6 versions of mfc and crt (at least) for it to work. (Batteries not
+included, and certainly no installshield.)
+
+== Important note for anyone building with make: i.e. anyone except devstudio
+users ==
+This release includes new standardization for the data directory. To enable
+Tesseract to find its data files, you must either:
+./configure
+make
+make install
+to move the data files to the standard place, or:
+export TESSDATA_PREFIX="directory in which your tessdata resides/"
+(or equivalent) in your .profile or whatever or setenv to set the environment
+variable. Note that the directory must end in a /
+HAVING tesseract and tessdata IN THE SAME DIRECTORY DOES NOT WORK ANY MORE.
+
+== All users ==
+Fixed a bunch of name collisions - mostly with stl.
+Made some preliminary changes for unicode compatibility. Includes a new data
+file (unicharset) and renaming of the other data files to eng.* to support
+different languages.
+There are also several other minor bug fixes and portability improvements
+for 64 bit, the latest visual studio compiler etc. Thanks to all who have
+contributed these fixes.
+
+NOTE: This is likely to be the last English-only release!
+Apologies in advance to non-windows users for bloating the distribution with
+windows executables. This will probably get fixed in the next release with
+the multi-language capability, since that will also bloat the distribution.
+
+
+Tesseract release notes Feb 2, 2007 - V1.03.
+Added mftraining and cntraining. Using an image with a box file, tesseract
+generates .tr output files. cntraining runs on the .tr files to make
+normproto that lives in tessdata. mftraining runs on the .tr files to
+make inttemp and pffmtable in tessdata. These are the main data files
+that tesseract uses to recognize characters. At present, the code to make
+dictionary files is not yet available, nor are any sample box files or
+rebuilt inttemp or documentation to create any of these. Recognition is
+still limited to the ASCII set, but when this problem is fixed, documentation
+will follow.
+
+Added a new API with adaptive thresholding for grey and color images.
+See ccmain/baseapi.h/cpp for details. The main program has been converted
+to use the API as an example. See main() in ccmain/tesseractmain.cpp for
+details. The API is designed to make it easy to add subclasses with ability
+to output the bounding boxes etc from the internal structures. The adaptive
+thresholding improves accuracy (most of the time) on non-binary images.
+
+Many memory leaks have been fixed. There are no known leaks left from using
+the API correctly.
+
+The adaptive classifier was not operating correctly. This bug, and several
+others have been fixed, including poor chopping, an indefinite (if not quite
+infinite) loop in the number parser, and a couple of crash bugs. Thanks to
+all that have contributed bugs and bug fixes.
+
+It is now possible to build without any of the graphics support to save code
+size using #define GRAPHICS_DISABLED. There is also a new EMBEDDED define
+for use on operating systems with limited library support.
+
+64-bit and Mac OSX buildability is now included in the mainline source tree.
+Thanks to all that have contributed patches and comments to help with that.
+1.03 is also endian-independent, apart from the tiff i/o, so if you use
+libtiff, the code should run on all platforms, even if you get/create new
+data files of a different endinanness.
+
+Some of the bug fixes improve accuracy, and so do some of the changes to
+DangAmbigs and user-words.
+
+Tesseract release notes, Oct 4 2006 - V1.02.
+Removed dependency on aspirin. *All* code is now licensed under Apache2.0.
+
+Tesseract release notes, Sep 7 2006 - V1.01.
+
+Fixes for this release:
+Added mfcpch.cpp and getopt.cpp for VC++.
+Fixed problem with greyscale images and no libtiff.
+Stopped debug window from being used for the usage output.
+Fixed load of inttemp for big-endian architectures.
+Fixed some Mac compilation issues.
+
+This version should read uncompressed 8 bit grey and 24 bit color tiffs
+without having to have libtiff. It does a dumb threshold though, so don't
+expect good results from poor contrast or images of natural scenes etc.
+
+If you just run tesseract with no command line args you should now get a
+sensible usage message on linux, with or without X-windows.
+
+If you can get it to compile on a PPC Mac, it may now run correctly,
+although not all the build issues are fixed yet.
+
+Building Tesseract:
+Windows:
+Unpack the tar.gz archive
+Open tesseract.dsw in DevStudio (preferably version 6, higher versions will be more difficult)
+Set Win32 - Release as the active configuration.
+Build.
+Copy tesseract.exe from bin.rel up one directory level.
+Run tesseract phototest.tif phototest
+This will create phototest.txt.
+
+Linux:
+Unpack the tar.gz archive
+./configure
+make
+Copy tesseract from ccmain up one directory level (or create a symbolic link)
+Run tesseract phototest.tif phototest
+This will create phototest.txt.

data/vendor/tesseract-2.04/StdAfx.cpp

@@ -0,0 +1,8 @@
+// stdafx.cpp : source file that includes just the standard includes
+//	tessdll.pch will be the pre-compiled header
+//	stdafx.obj will contain the pre-compiled type information
+
+#include "stdafx.h"
+
+// TODO: reference any additional headers you need in STDAFX.H
+// and not in this file

data/vendor/tesseract-2.04/StdAfx.h

@@ -0,0 +1,24 @@
+// stdafx.h : include file for standard system include files,
+//  or project specific include files that are used frequently, but
+//      are changed infrequently
+//
+
+#if !defined(AFX_STDAFX_H__C038B272_58EA_4509_8B59_C963F64AF1D8__INCLUDED_)
+#define AFX_STDAFX_H__C038B272_58EA_4509_8B59_C963F64AF1D8__INCLUDED_
+
+#if _MSC_VER > 1000
+#pragma once
+#endif // _MSC_VER > 1000
+
+
+// Insert your headers here
+#define WIN32_LEAN_AND_MEAN		// Exclude rarely-used stuff from Windows headers
+
+#include <windows.h>
+
+// TODO: reference additional headers your program requires here
+
+//{{AFX_INSERT_LOCATION}}
+// Microsoft Visual C++ will insert additional declarations immediately before the previous line.
+
+#endif // !defined(AFX_STDAFX_H__C038B272_58EA_4509_8B59_C963F64AF1D8__INCLUDED_)

data/vendor/tesseract-2.04/ccmain/Makefile.am

@@ -0,0 +1,63 @@
+SUBDIRS =
+AM_CPPFLAGS = \
+    -I$(top_srcdir)/ccutil -I$(top_srcdir)/ccstruct \
+    -I$(top_srcdir)/image -I$(top_srcdir)/viewer \
+    -I$(top_srcdir)/ccops -I$(top_srcdir)/dict \
+    -I$(top_srcdir)/classify \
+    -I$(top_srcdir)/wordrec -I$(top_srcdir)/cutil \
+    -I$(top_srcdir)/textord
+
+EXTRA_DIST = tessembedded.cpp
+
+include_HEADERS = \
+    adaptions.h applybox.h baseapi.h blobcmp.h \
+    callnet.h charcut.h \
+    control.h docqual.h expandblob.h fixspace.h fixxht.h \
+    imgscale.h matmatch.h output.h paircmp.h reject.h scaleimg.h \
+    tessbox.h tessedit.h tesseractmain.h tessvars.h tfacep.h \
+    pagewalk.h pgedit.h varabled.h \
+    tessembedded.h tessio.h tfacepp.h tstruct.h werdit.h
+
+lib_LIBRARIES = libtesseract_main.a libtesseract_full.a
+libtesseract_main_a_SOURCES = \
+    tessedit.cpp adaptions.cpp applybox.cpp \
+    baseapi.cpp blobcmp.cpp \
+    callnet.cpp charcut.cpp charsample.cpp control.cpp \
+    docqual.cpp expandblob.cpp fixspace.cpp fixxht.cpp \
+    imgscale.cpp matmatch.cpp output.cpp paircmp.cpp \
+    reject.cpp scaleimg.cpp tessbox.cpp tessvars.cpp \
+    pagewalk.cpp pgedit.cpp varabled.cpp \
+    tfacepp.cpp tstruct.cpp werdit.cpp
+libtesseract_full_a_SOURCES = tesseractfull.cc
+libtesseract_full.o: tesseractfull.o \
+    libtesseract_main.a \
+    ../textord/libtesseract_textord.a \
+    ../pageseg/libtesseract_pageseg.a \
+    ../wordrec/libtesseract_wordrec.a \
+    ../classify/libtesseract_classify.a \
+    ../dict/libtesseract_dict.a \
+    ../viewer/libtesseract_viewer.a \
+    ../image/libtesseract_image.a \
+    ../cutil/libtesseract_cutil.a \
+    ../ccstruct/libtesseract_ccstruct.a \
+    ../ccutil/libtesseract_ccutil.a
+	ld -r -o libtesseract_full.o tesseractfull.o \
+    libtesseract_main.a \
+    ../textord/libtesseract_textord.a \
+    ../pageseg/libtesseract_pageseg.a \
+    ../wordrec/libtesseract_wordrec.a \
+    ../classify/libtesseract_classify.a \
+    ../dict/libtesseract_dict.a \
+    ../viewer/libtesseract_viewer.a \
+    ../image/libtesseract_image.a \
+    ../cutil/libtesseract_cutil.a \
+    ../ccstruct/libtesseract_ccstruct.a \
+    ../ccutil/libtesseract_ccutil.a
+
+libtesseract_full.a : libtesseract_full.o
+	ar cru libtesseract_full.a libtesseract_full.o ; ranlib libtesseract_full.a
+
+bin_PROGRAMS = tesseract
+tesseract_SOURCES = tesseractmain.cpp
+tesseract_LDADD = \
+    libtesseract_full.a