qtbindings 4.8.6.0-x86-mingw32 → 4.8.6.1-x86-mingw32

data/examples/ruboids/ruboids/Flock.rb

@@ -1,47 +1,47 @@
-#
-# Copyright (c) 2001 by Jim Menard <jimm@io.com>
-#
-# Released under the same license as Ruby. See
-# http://www.ruby-lang.org/en/LICENSE.txt.
-#
-
-require './Flock'
-require './Boid'
-require './Params'
-
-class Flock
-    attr_reader :members
-
-    def initialize
-	@members = []
-    end
-
-    def add(boid)
-	@members << boid
-	boid.flock = self
-    end
-
-    def draw
-	@members.each { | boid | boid.draw() }
-    end
-
-    def move
-	@members.each { | boid | boid.move() }
-    end
-
-    # Return distance between two boid's positions.
-    def distBetween(b1, b2)
-	return b1.position.distanceTo(b2.position)
-    end
-
-    # Center of mass
-    def centerExcluding(b)
-	p = Point.new()
-	@members.each { | boid |
-	    p.addPoint(boid.position) unless boid == b
-	}
-	p.divideBy(@members.length - 1)
-	return p
-    end
-end
-
+#
+# Copyright (c) 2001 by Jim Menard <jimm@io.com>
+#
+# Released under the same license as Ruby. See
+# http://www.ruby-lang.org/en/LICENSE.txt.
+#
+
+require './Flock'
+require './Boid'
+require './Params'
+
+class Flock
+    attr_reader :members
+
+    def initialize
+	@members = []
+    end
+
+    def add(boid)
+	@members << boid
+	boid.flock = self
+    end
+
+    def draw
+	@members.each { | boid | boid.draw() }
+    end
+
+    def move
+	@members.each { | boid | boid.move() }
+    end
+
+    # Return distance between two boid's positions.
+    def distBetween(b1, b2)
+	return b1.position.distanceTo(b2.position)
+    end
+
+    # Center of mass
+    def centerExcluding(b)
+	p = Point.new()
+	@members.each { | boid |
+	    p.addPoint(boid.position) unless boid == b
+	}
+	p.divideBy(@members.length - 1)
+	return p
+    end
+end
+

data/examples/ruboids/ruboids/Graphics.rb

@@ -1,278 +1,278 @@
-#
-# Copyright (c) 2001 by Jim Menard <jimm@io.com>
-#
-# Released under the same license as Ruby. See
-# http://www.ruby-lang.org/en/LICENSE.txt.
-#
-
-require './Triangle'
-
-class Graphics
-
-    DEFAULT_SPHERE_ITERATIONS = 3
-
-    XPLUS = Point.new(1, 0, 0)	# X
-    XMINUS = Point.new(-1, 0, 0)# -X
-    YPLUS = Point.new(0, 1, 0)	# Y
-    YMINUS = Point.new(0, -1, 0)# -Y
-    ZPLUS = Point.new(0, 0, 1)	# Z
-    ZMINUS = Point.new(0, 0, -1)# -Z
-
-    # defined w/counter-clockwise triangles
-    OCTAHEDRON = [
-	Triangle.new(YPLUS, ZPLUS, XPLUS),
-	Triangle.new(XMINUS, ZPLUS, YPLUS),
-	Triangle.new(YMINUS, ZPLUS, XMINUS),
-	Triangle.new(XPLUS, ZPLUS, YMINUS),
-	Triangle.new(ZMINUS, YPLUS, XPLUS),
-	Triangle.new(ZMINUS, XMINUS , YPLUS),
-	Triangle.new(ZMINUS, YMINUS , XMINUS),
-	Triangle.new(ZMINUS, XPLUS, YMINUS)
-    ]
-    # Defines counter-clockwise points used in OpenGL TRIANGLE_STRIP to
-    # create a circle on the X/Z plane. Don't include center point here;
-    # It is added when outputting the circle.
-    SQUARE = [
-	XPLUS, ZMINUS, XMINUS, ZPLUS, XPLUS
-    ]
-
-    @@spheres = Hash.new()
-    @@circles = Hash.new()
-
-    def Graphics.radiansToDegrees(rad)
-	return rad * 180.0 / Math::PI
-    end
-
-    def Graphics.degreesToRadians(deg)
-	return deg * Math::PI / 180.0
-    end
-
-    # Given a vector, return a point containing x, y, z rotation angles.
-    #
-    # atan2(x, y) = the angle formed with the x axis by the ray from the
-    # origin to the point {x,y}
-    def Graphics.rotations(v)
-	return Point::ORIGIN.dup() if v.nil?
-	return v if v == Point::ORIGIN
-
-	x = Math.atan2(v.y, v.z)
-	y = Math.atan2(v.z, v.x)
-	z = Math.atan2(v.y, v.x)
-
-	rot = Point.new(z, x, y)
-	rot.add(Math::PI).multiplyBy(180.0).divideBy(Math::PI)
-
-	rot.x = rot.x.to_i
-	rot.y = rot.y.to_i
-	rot.z = rot.z.to_i
-
-	return rot
-    end
-
-    # Build box from corners. All faces are counter-clockwise.
-    def Graphics.boxFromCorners(p0, p1)
-	pa = p0.dup()
-	pb = p1.dup()
-
-	# Make sure all coords of pa are < all coords of pb
-	if pa.x > pb.x
-	    tmp = pa.x; pa.x = pb.x; pb.x = tmp
-	end
-	if pa.y > pb.y
-	    tmp = pa.y; pa.y = pb.y; pb.y = tmp
-	end
-	if pa.z > pb.z
-	    tmp = pa.z; pa.z = pb.z; pb.z = tmp
-	end
-
-	Begin(QUAD_STRIP)
-
-	# top
-	Vertex(pb.x, pb.y, pa.z)
-	Vertex(pa.x, pb.y, pa.z)
-	# top/front
-	Vertex(pb.x, pb.y, pb.z)
-	Vertex(pa.x, pb.y, pb.z)
-	# front/bottom
-	Vertex(pb.x, pa.y, pb.z)
-	Vertex(pa.x, pa.y, pb.z)
-	# bottom/back
-	Vertex(pb.x, pa.y, pa.z)
-	Vertex(pa.x, pa.y, pa.z)
-	# back/top
-	Vertex(pb.x, pb.y, pa.z)
-	Vertex(pa.x, pb.y, pa.z)
-
-	End()
-
-	Begin(QUADS)
-
-	# left
-	Vertex(pa.x, pa.y, pb.z)
-	Vertex(pa.x, pa.y, pa.z)
-	Vertex(pa.x, pb.y, pa.z)
-	Vertex(pa.x, pb.y, pb.z)
-
-	# right
-	Vertex(pb.x, pa.y, pb.z)
-	Vertex(pb.x, pa.y, pa.z)
-	Vertex(pb.x, pb.y, pa.z)
-	Vertex(pb.x, pb.y, pb.z)
-
-	End()
-    end
-
-    # sphere() (and buildSphere()) - generate a triangle mesh approximating
-    # a sphere by recursive subdivision. First approximation is an
-    # octahedron; each level of refinement increases the number of
-    # triangles by a factor of 4.
-    #
-    # Level 3 (128 triangles) is a good tradeoff if gouraud shading is used
-    # to render the database.
-    #
-    # Usage: sphere [level] [counterClockwise]
-    #
-    #	The value level is an integer >= 1 setting the recursion level
-    #		(default = DEFAULT_SPHERE_ITERATIONS).
-    #	The boolean counterClockwise causes triangles to be generated
-    #		with vertices in counterclockwise order as viewed from
-    #		the outside in a RHS coordinate system. The default is
-    #		counter-clockwise.
-    #
-    # @author Jon Leech (leech@cs.unc.edu) 3/24/89 (C version)
-    # Ruby version by Jim Menard (jimm@io.com), May 2001.
-    def Graphics.sphere(iterations = DEFAULT_SPHERE_ITERATIONS,
-			counterClockwise = true)
-	if @@spheres[iterations].nil?
-	    @@spheres[iterations] = buildSphere(iterations, OCTAHEDRON)
-	end
-	sphere = @@spheres[iterations] 
-	
-	Begin(TRIANGLES)
-	sphere.each { | triangle |
-	    triangle.points.each { | p |
-		Vertex(p.x, p.y, p.z) if counterClockwise
-		Vertex(p.z, p.y, p.x) if !counterClockwise
-	    }
-	}
-	End()
-    end
-
-    #
-    # Subdivide each triangle in the oldObj approximation and normalize
-    #  the new points thus generated to lie on the surface of the unit
-    #  sphere.
-    # Each input triangle with vertices labelled [0,1,2] as shown
-    #  below will be turned into four new triangles:
-    #
-    #                        Make new points
-    #                                a = (0+2)/2
-    #                                b = (0+1)/2
-    #                                c = (1+2)/2
-    #          1
-    #         /\             Normalize a, b, c
-    #        /  \
-    #      b/____\ c         Construct new counter-clockwise triangles
-    #      /\    /\                  [a,b,0]
-    #     /  \  /  \                 [c,1,b]
-    #    /____\/____\                [c,b,a]
-    #   0      a     2               [2,c,a]
-    #
-    #
-    # The normalize step (which makes each point a, b, c unit distance
-    # from the origin) is where we can modify the sphere's shape.
-    #
-    def Graphics.buildSphere(iterations, sphere)
-	oldObj = sphere
-	# Subdivide each starting triangle (maxlevel - 1) times
-	iterations -= 1
-	iterations.times {
-	    # Create a new object. Allocate 4 * the number of points in the
-	    # the current approximation.
-	    newObj = Array.new(oldObj.length * 4)
-
-	    j = 0
-	    oldObj.each { | oldt |
-		# New midpoints
-		a = Point.midpoint(oldt.points[0], oldt.points[2])
-		a.normalize!()
-		b = Point.midpoint(oldt.points[0], oldt.points[1])
-		b.normalize!()
-		c = Point.midpoint(oldt.points[1], oldt.points[2])
-		c.normalize!()
-
-		# New triangeles. Their vertices are counter-clockwise.
-		newObj[j] = Triangle.new(a, b, oldt.points[0])
-		j += 1
-		newObj[j] = Triangle.new(c, oldt.points[1], b)
-		j += 1
-		newObj[j] = Triangle.new(c, b, a)
-		j += 1
-		newObj[j] = Triangle.new(oldt.points[2], c, a)
-		j += 1
-	    }
-
-	    # Continue subdividing new triangles
-	    oldObj = newObj
-	}
-	return oldObj
-    end
-
-    # Creates a circle in the X/Z plane. To have the circle's normal
-    # point down (-Y), specify clockwise instead of counter-clockwise.
-    # To create the circle in another plane, call OpenGL's Rotate() method
-    # before calling this.
-    def Graphics.circle(iterations = DEFAULT_SPHERE_ITERATIONS,
-			counterClockwise = true)
-	if @@circles[iterations].nil?
-	    @@circles[iterations] = buildCircle(iterations, SQUARE)
-	end
-	circle = @@circles[iterations] 
-	
-	Begin(TRIANGLE_FAN)
-	Vertex(0, 0, 0)
-	if counterClockwise
-	    circle.each { | p | Vertex(p.x, 0, p.z) }
-	else
-	    circle.reverse.each { | p | Vertex(p.x, 0, p.z) }
-	end
-	End()
-    end
-
-    # Different than buildSphere because we are creating triangles to
-    # be used in an OpenGL TRIANGLE_FAN operation. Thus the first point
-    # (the center) is always inviolate. We create new points between
-    # the remaining points.
-    def Graphics.buildCircle(iterations, circle)
-	oldObj = circle
-	# Subdivide each starting line segment (maxlevel - 1) times
-	iterations -= 1
-	iterations.times {
-	    # Create a new object. Allocate 2 * the number of points in the
-	    # the current approximation. Subtract one because the last point
-	    # (same as the first point) is simply copied.
-	    newObj = Array.new(oldObj.length * 2 - 1)
-
-	    prevP = nil
-	    j = 0
-	    oldObj.each { | p |
-		if !prevP.nil?
-		    newObj[j] = prevP
-		    j += 1
-
-		    # New midpoint
-		    a = Point.midpoint(prevP, p)
-		    a.normalize!()
-		    newObj[j] = a
-		    j += 1
-		end
-		prevP = p
-	    }
-	    newObj[j] = prevP	# Copy last point
-
-	    # Continue subdividing new triangles
-	    oldObj = newObj
-	}
-	return oldObj
-    end
-end
+#
+# Copyright (c) 2001 by Jim Menard <jimm@io.com>
+#
+# Released under the same license as Ruby. See
+# http://www.ruby-lang.org/en/LICENSE.txt.
+#
+
+require './Triangle'
+
+class Graphics
+
+    DEFAULT_SPHERE_ITERATIONS = 3
+
+    XPLUS = Point.new(1, 0, 0)	# X
+    XMINUS = Point.new(-1, 0, 0)# -X
+    YPLUS = Point.new(0, 1, 0)	# Y
+    YMINUS = Point.new(0, -1, 0)# -Y
+    ZPLUS = Point.new(0, 0, 1)	# Z
+    ZMINUS = Point.new(0, 0, -1)# -Z
+
+    # defined w/counter-clockwise triangles
+    OCTAHEDRON = [
+	Triangle.new(YPLUS, ZPLUS, XPLUS),
+	Triangle.new(XMINUS, ZPLUS, YPLUS),
+	Triangle.new(YMINUS, ZPLUS, XMINUS),
+	Triangle.new(XPLUS, ZPLUS, YMINUS),
+	Triangle.new(ZMINUS, YPLUS, XPLUS),
+	Triangle.new(ZMINUS, XMINUS , YPLUS),
+	Triangle.new(ZMINUS, YMINUS , XMINUS),
+	Triangle.new(ZMINUS, XPLUS, YMINUS)
+    ]
+    # Defines counter-clockwise points used in OpenGL TRIANGLE_STRIP to
+    # create a circle on the X/Z plane. Don't include center point here;
+    # It is added when outputting the circle.
+    SQUARE = [
+	XPLUS, ZMINUS, XMINUS, ZPLUS, XPLUS
+    ]
+
+    @@spheres = Hash.new()
+    @@circles = Hash.new()
+
+    def Graphics.radiansToDegrees(rad)
+	return rad * 180.0 / Math::PI
+    end
+
+    def Graphics.degreesToRadians(deg)
+	return deg * Math::PI / 180.0
+    end
+
+    # Given a vector, return a point containing x, y, z rotation angles.
+    #
+    # atan2(x, y) = the angle formed with the x axis by the ray from the
+    # origin to the point {x,y}
+    def Graphics.rotations(v)
+	return Point::ORIGIN.dup() if v.nil?
+	return v if v == Point::ORIGIN
+
+	x = Math.atan2(v.y, v.z)
+	y = Math.atan2(v.z, v.x)
+	z = Math.atan2(v.y, v.x)
+
+	rot = Point.new(z, x, y)
+	rot.add(Math::PI).multiplyBy(180.0).divideBy(Math::PI)
+
+	rot.x = rot.x.to_i
+	rot.y = rot.y.to_i
+	rot.z = rot.z.to_i
+
+	return rot
+    end
+
+    # Build box from corners. All faces are counter-clockwise.
+    def Graphics.boxFromCorners(p0, p1)
+	pa = p0.dup()
+	pb = p1.dup()
+
+	# Make sure all coords of pa are < all coords of pb
+	if pa.x > pb.x
+	    tmp = pa.x; pa.x = pb.x; pb.x = tmp
+	end
+	if pa.y > pb.y
+	    tmp = pa.y; pa.y = pb.y; pb.y = tmp
+	end
+	if pa.z > pb.z
+	    tmp = pa.z; pa.z = pb.z; pb.z = tmp
+	end
+
+	Begin(QUAD_STRIP)
+
+	# top
+	Vertex(pb.x, pb.y, pa.z)
+	Vertex(pa.x, pb.y, pa.z)
+	# top/front
+	Vertex(pb.x, pb.y, pb.z)
+	Vertex(pa.x, pb.y, pb.z)
+	# front/bottom
+	Vertex(pb.x, pa.y, pb.z)
+	Vertex(pa.x, pa.y, pb.z)
+	# bottom/back
+	Vertex(pb.x, pa.y, pa.z)
+	Vertex(pa.x, pa.y, pa.z)
+	# back/top
+	Vertex(pb.x, pb.y, pa.z)
+	Vertex(pa.x, pb.y, pa.z)
+
+	End()
+
+	Begin(QUADS)
+
+	# left
+	Vertex(pa.x, pa.y, pb.z)
+	Vertex(pa.x, pa.y, pa.z)
+	Vertex(pa.x, pb.y, pa.z)
+	Vertex(pa.x, pb.y, pb.z)
+
+	# right
+	Vertex(pb.x, pa.y, pb.z)
+	Vertex(pb.x, pa.y, pa.z)
+	Vertex(pb.x, pb.y, pa.z)
+	Vertex(pb.x, pb.y, pb.z)
+
+	End()
+    end
+
+    # sphere() (and buildSphere()) - generate a triangle mesh approximating
+    # a sphere by recursive subdivision. First approximation is an
+    # octahedron; each level of refinement increases the number of
+    # triangles by a factor of 4.
+    #
+    # Level 3 (128 triangles) is a good tradeoff if gouraud shading is used
+    # to render the database.
+    #
+    # Usage: sphere [level] [counterClockwise]
+    #
+    #	The value level is an integer >= 1 setting the recursion level
+    #		(default = DEFAULT_SPHERE_ITERATIONS).
+    #	The boolean counterClockwise causes triangles to be generated
+    #		with vertices in counterclockwise order as viewed from
+    #		the outside in a RHS coordinate system. The default is
+    #		counter-clockwise.
+    #
+    # @author Jon Leech (leech@cs.unc.edu) 3/24/89 (C version)
+    # Ruby version by Jim Menard (jimm@io.com), May 2001.
+    def Graphics.sphere(iterations = DEFAULT_SPHERE_ITERATIONS,
+			counterClockwise = true)
+	if @@spheres[iterations].nil?
+	    @@spheres[iterations] = buildSphere(iterations, OCTAHEDRON)
+	end
+	sphere = @@spheres[iterations] 
+	
+	Begin(TRIANGLES)
+	sphere.each { | triangle |
+	    triangle.points.each { | p |
+		Vertex(p.x, p.y, p.z) if counterClockwise
+		Vertex(p.z, p.y, p.x) if !counterClockwise
+	    }
+	}
+	End()
+    end
+
+    #
+    # Subdivide each triangle in the oldObj approximation and normalize
+    #  the new points thus generated to lie on the surface of the unit
+    #  sphere.
+    # Each input triangle with vertices labelled [0,1,2] as shown
+    #  below will be turned into four new triangles:
+    #
+    #                        Make new points
+    #                                a = (0+2)/2
+    #                                b = (0+1)/2
+    #                                c = (1+2)/2
+    #          1
+    #         /\             Normalize a, b, c
+    #        /  \
+    #      b/____\ c         Construct new counter-clockwise triangles
+    #      /\    /\                  [a,b,0]
+    #     /  \  /  \                 [c,1,b]
+    #    /____\/____\                [c,b,a]
+    #   0      a     2               [2,c,a]
+    #
+    #
+    # The normalize step (which makes each point a, b, c unit distance
+    # from the origin) is where we can modify the sphere's shape.
+    #
+    def Graphics.buildSphere(iterations, sphere)
+	oldObj = sphere
+	# Subdivide each starting triangle (maxlevel - 1) times
+	iterations -= 1
+	iterations.times {
+	    # Create a new object. Allocate 4 * the number of points in the
+	    # the current approximation.
+	    newObj = Array.new(oldObj.length * 4)
+
+	    j = 0
+	    oldObj.each { | oldt |
+		# New midpoints
+		a = Point.midpoint(oldt.points[0], oldt.points[2])
+		a.normalize!()
+		b = Point.midpoint(oldt.points[0], oldt.points[1])
+		b.normalize!()
+		c = Point.midpoint(oldt.points[1], oldt.points[2])
+		c.normalize!()
+
+		# New triangeles. Their vertices are counter-clockwise.
+		newObj[j] = Triangle.new(a, b, oldt.points[0])
+		j += 1
+		newObj[j] = Triangle.new(c, oldt.points[1], b)
+		j += 1
+		newObj[j] = Triangle.new(c, b, a)
+		j += 1
+		newObj[j] = Triangle.new(oldt.points[2], c, a)
+		j += 1
+	    }
+
+	    # Continue subdividing new triangles
+	    oldObj = newObj
+	}
+	return oldObj
+    end
+
+    # Creates a circle in the X/Z plane. To have the circle's normal
+    # point down (-Y), specify clockwise instead of counter-clockwise.
+    # To create the circle in another plane, call OpenGL's Rotate() method
+    # before calling this.
+    def Graphics.circle(iterations = DEFAULT_SPHERE_ITERATIONS,
+			counterClockwise = true)
+	if @@circles[iterations].nil?
+	    @@circles[iterations] = buildCircle(iterations, SQUARE)
+	end
+	circle = @@circles[iterations] 
+	
+	Begin(TRIANGLE_FAN)
+	Vertex(0, 0, 0)
+	if counterClockwise
+	    circle.each { | p | Vertex(p.x, 0, p.z) }
+	else
+	    circle.reverse.each { | p | Vertex(p.x, 0, p.z) }
+	end
+	End()
+    end
+
+    # Different than buildSphere because we are creating triangles to
+    # be used in an OpenGL TRIANGLE_FAN operation. Thus the first point
+    # (the center) is always inviolate. We create new points between
+    # the remaining points.
+    def Graphics.buildCircle(iterations, circle)
+	oldObj = circle
+	# Subdivide each starting line segment (maxlevel - 1) times
+	iterations -= 1
+	iterations.times {
+	    # Create a new object. Allocate 2 * the number of points in the
+	    # the current approximation. Subtract one because the last point
+	    # (same as the first point) is simply copied.
+	    newObj = Array.new(oldObj.length * 2 - 1)
+
+	    prevP = nil
+	    j = 0
+	    oldObj.each { | p |
+		if !prevP.nil?
+		    newObj[j] = prevP
+		    j += 1
+
+		    # New midpoint
+		    a = Point.midpoint(prevP, p)
+		    a.normalize!()
+		    newObj[j] = a
+		    j += 1
+		end
+		prevP = p
+	    }
+	    newObj[j] = prevP	# Copy last point
+
+	    # Continue subdividing new triangles
+	    oldObj = newObj
+	}
+	return oldObj
+    end
+end