qtbindings 4.8.6.0-x86-mingw32 → 4.8.6.1-x86-mingw32

data/examples/network/loopback/dialog.rb

@@ -1,163 +1,163 @@
-=begin
-**
-** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
-**
-** This file is part of the example classes of the Qt Toolkit.
-**
-** This file may be used under the terms of the GNU General Public
-** License version 2.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of
-** this file.  Please review the following information to ensure GNU
-** General Public Licensing requirements will be met:
-** http://www.trolltech.com/products/qt/opensource.html
-**
-** If you are unsure which license is appropriate for your use, please
-** review the following information:
-** http://www.trolltech.com/products/qt/licensing.html or contact the
-** sales department at sales@trolltech.com.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-
-** Translated to QtRuby by Richard Dale
-=end
-
-class Dialog < Qt::Dialog
-	
-	slots	:start,
-    		:acceptConnection,
-    		:startTransfer,
-    		:updateServerProgress,
-    		'updateClientProgress(qint64)',
-    		'displayError(QAbstractSocket::SocketError)'
-	
-	TotalBytes = 50 * 1024 * 1024
-	PayloadSize = 65536
-	
-	def initialize(parent = nil)
-	    super(parent)
-		@tcpServer = Qt::TcpServer.new
-		@tcpClient = Qt::TcpSocket.new
-	    @clientProgressBar = Qt::ProgressBar.new
-	    @clientStatusLabel = Qt::Label.new(tr("Client ready"))
-	    @serverProgressBar = Qt::ProgressBar.new
-	    @serverStatusLabel = Qt::Label.new(tr("Server ready"))
-	
-	    @startButton = Qt::PushButton.new(tr("&Start"))
-	    @quitButton = Qt::PushButton.new(tr("&Quit"))
-	
-	    connect(@startButton, SIGNAL(:clicked), self, SLOT(:start))
-	    connect(@quitButton, SIGNAL(:clicked), self, SLOT(:close))
-	    connect(@tcpServer, SIGNAL(:newConnection),
-	            self, SLOT(:acceptConnection))
-	    connect(@tcpClient, SIGNAL(:connected), self, SLOT(:startTransfer))
-	    connect(@tcpClient, SIGNAL('bytesWritten(qint64)'),
-	            self, SLOT('updateClientProgress(qint64)'))
-	    connect(@tcpClient, SIGNAL('error(QAbstractSocket::SocketError)'),
-	            self, SLOT('displayError(QAbstractSocket::SocketError)'))
-	
-	    buttonLayout = Qt::HBoxLayout.new do |b|
-	    	b.addStretch(1)
-	    	b.addWidget(@startButton)
-	    	b.addWidget(@quitButton)
-		end
-	
-	    self.layout = Qt::VBoxLayout.new do |m|
-			m.addWidget(@clientProgressBar)
-			m.addWidget(@clientStatusLabel)
-			m.addWidget(@serverProgressBar)
-			m.addWidget(@serverStatusLabel)
-			m.addLayout(buttonLayout)
-	    end
-	
-	    self.windowTitle = tr("Loopback")
-	end
-	
-	def start()
-	    @startButton.enabled = false
-	
-	    Qt::Application.overrideCursor = Qt::Cursor.new(Qt::WaitCursor)
-	
-	    @bytesWritten = 0
-	    @bytesReceived = 0
-	
-	    while !@tcpServer.isListening && !@tcpServer.listen do
-	        ret = Qt::MessageBox.critical(self, tr("Loopback"),
-	                                        tr("Unable to start the test: %s." % @tcpServer.errorString),
-	                                        Qt::MessageBox::Retry,
-						                    Qt::MessageBox::Cancel)
-	        if ret == Qt::MessageBox::Cancel
-	            return
-			end
-	    end
-	
-	    @serverStatusLabel.text = tr("Listening")
-	    @clientStatusLabel.text = tr("Connecting")
-	    @tcpClient.connectToHost(Qt::HostAddress.new(Qt::HostAddress::LocalHost), 
-								@tcpServer.serverPort)
-	end
-	
-	def acceptConnection()
-	    @tcpServerConnection = @tcpServer.nextPendingConnection
-	    connect(@tcpServerConnection, SIGNAL(:readyRead),
-	            self, SLOT(:updateServerProgress))
-	    connect(@tcpServerConnection, SIGNAL('error(QAbstractSocket::SocketError)'),
-	            self, SLOT('displayError(QAbstractSocket::SocketError)'))
-	
-	    @serverStatusLabel.text = tr("Accepted connection")
-	    @tcpServer.close()
-	end
-	
-	def startTransfer()
-	    @bytesToWrite = TotalBytes - @tcpClient.write(Qt::ByteArray.new('@' * PayloadSize))
-	    @clientStatusLabel.text = tr("Connected")
-	end
-	
-	def updateServerProgress()
-	    @bytesReceived += @tcpServerConnection.bytesAvailable
-	    @tcpServerConnection.readAll()
-	
-	    @serverProgressBar.maximum = TotalBytes
-	    @serverProgressBar.value = @bytesReceived
-	    @serverStatusLabel.text = tr("Received %dMB" %
-	                                  (@bytesReceived / (1024 * 1024)))
-	
-	    if @bytesReceived == TotalBytes
-	        @tcpServerConnection.close
-	        @startButton.enabled = true
-	        Qt::Application.restoreOverrideCursor
-	    end
-	end
-	
-	def updateClientProgress(numBytes)
-	    @bytesWritten += numBytes
-	    if @bytesToWrite > 0
-	        @bytesToWrite -= @tcpClient.write(Qt::ByteArray.new('@' * [@bytesToWrite, PayloadSize].min))
-		end
-
-	    @clientProgressBar.maximum = TotalBytes
-	    @clientProgressBar.value = @bytesWritten
-	    @clientStatusLabel.text = tr("Sent %dMB" % 
-	                                 (@bytesWritten / (1024 * 1024)) )
-	end
-	
-	def displayError(socketError)
-	    if socketError == Qt::TcpSocket::RemoteHostClosedError
-	        return
-		end
-	
-	    Qt::MessageBox.information(self, tr("Network error"),
-	                             tr("The following error occurred: %s." %
-	                                 tcpClient.errorString))
-	
-	    @tcpClient.close
-	    @tcpServer.close
-	    @clientProgressBar.reset
-	    @serverProgressBar.reset
-	    @clientStatusLabel.text = tr("Client ready")
-	    @serverStatusLabel.text = tr("Server ready")
-	    @startButton.enabled = true
-	    Qt::Application.restoreOverrideCursor
-	end
-end
+=begin
+**
+** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
+**
+** This file is part of the example classes of the Qt Toolkit.
+**
+** This file may be used under the terms of the GNU General Public
+** License version 2.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of
+** this file.  Please review the following information to ensure GNU
+** General Public Licensing requirements will be met:
+** http://www.trolltech.com/products/qt/opensource.html
+**
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://www.trolltech.com/products/qt/licensing.html or contact the
+** sales department at sales@trolltech.com.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+
+** Translated to QtRuby by Richard Dale
+=end
+
+class Dialog < Qt::Dialog
+	
+	slots	:start,
+    		:acceptConnection,
+    		:startTransfer,
+    		:updateServerProgress,
+    		'updateClientProgress(qint64)',
+    		'displayError(QAbstractSocket::SocketError)'
+	
+	TotalBytes = 50 * 1024 * 1024
+	PayloadSize = 65536
+	
+	def initialize(parent = nil)
+	    super(parent)
+		@tcpServer = Qt::TcpServer.new
+		@tcpClient = Qt::TcpSocket.new
+	    @clientProgressBar = Qt::ProgressBar.new
+	    @clientStatusLabel = Qt::Label.new(tr("Client ready"))
+	    @serverProgressBar = Qt::ProgressBar.new
+	    @serverStatusLabel = Qt::Label.new(tr("Server ready"))
+	
+	    @startButton = Qt::PushButton.new(tr("&Start"))
+	    @quitButton = Qt::PushButton.new(tr("&Quit"))
+	
+	    connect(@startButton, SIGNAL(:clicked), self, SLOT(:start))
+	    connect(@quitButton, SIGNAL(:clicked), self, SLOT(:close))
+	    connect(@tcpServer, SIGNAL(:newConnection),
+	            self, SLOT(:acceptConnection))
+	    connect(@tcpClient, SIGNAL(:connected), self, SLOT(:startTransfer))
+	    connect(@tcpClient, SIGNAL('bytesWritten(qint64)'),
+	            self, SLOT('updateClientProgress(qint64)'))
+	    connect(@tcpClient, SIGNAL('error(QAbstractSocket::SocketError)'),
+	            self, SLOT('displayError(QAbstractSocket::SocketError)'))
+	
+	    buttonLayout = Qt::HBoxLayout.new do |b|
+	    	b.addStretch(1)
+	    	b.addWidget(@startButton)
+	    	b.addWidget(@quitButton)
+		end
+	
+	    self.layout = Qt::VBoxLayout.new do |m|
+			m.addWidget(@clientProgressBar)
+			m.addWidget(@clientStatusLabel)
+			m.addWidget(@serverProgressBar)
+			m.addWidget(@serverStatusLabel)
+			m.addLayout(buttonLayout)
+	    end
+	
+	    self.windowTitle = tr("Loopback")
+	end
+	
+	def start()
+	    @startButton.enabled = false
+	
+	    Qt::Application.overrideCursor = Qt::Cursor.new(Qt::WaitCursor)
+	
+	    @bytesWritten = 0
+	    @bytesReceived = 0
+	
+	    while !@tcpServer.isListening && !@tcpServer.listen do
+	        ret = Qt::MessageBox.critical(self, tr("Loopback"),
+	                                        tr("Unable to start the test: %s." % @tcpServer.errorString),
+	                                        Qt::MessageBox::Retry,
+						                    Qt::MessageBox::Cancel)
+	        if ret == Qt::MessageBox::Cancel
+	            return
+			end
+	    end
+	
+	    @serverStatusLabel.text = tr("Listening")
+	    @clientStatusLabel.text = tr("Connecting")
+	    @tcpClient.connectToHost(Qt::HostAddress.new(Qt::HostAddress::LocalHost), 
+								@tcpServer.serverPort)
+	end
+	
+	def acceptConnection()
+	    @tcpServerConnection = @tcpServer.nextPendingConnection
+	    connect(@tcpServerConnection, SIGNAL(:readyRead),
+	            self, SLOT(:updateServerProgress))
+	    connect(@tcpServerConnection, SIGNAL('error(QAbstractSocket::SocketError)'),
+	            self, SLOT('displayError(QAbstractSocket::SocketError)'))
+	
+	    @serverStatusLabel.text = tr("Accepted connection")
+	    @tcpServer.close()
+	end
+	
+	def startTransfer()
+	    @bytesToWrite = TotalBytes - @tcpClient.write(Qt::ByteArray.new('@' * PayloadSize))
+	    @clientStatusLabel.text = tr("Connected")
+	end
+	
+	def updateServerProgress()
+	    @bytesReceived += @tcpServerConnection.bytesAvailable
+	    @tcpServerConnection.readAll()
+	
+	    @serverProgressBar.maximum = TotalBytes
+	    @serverProgressBar.value = @bytesReceived
+	    @serverStatusLabel.text = tr("Received %dMB" %
+	                                  (@bytesReceived / (1024 * 1024)))
+	
+	    if @bytesReceived == TotalBytes
+	        @tcpServerConnection.close
+	        @startButton.enabled = true
+	        Qt::Application.restoreOverrideCursor
+	    end
+	end
+	
+	def updateClientProgress(numBytes)
+	    @bytesWritten += numBytes
+	    if @bytesToWrite > 0
+	        @bytesToWrite -= @tcpClient.write(Qt::ByteArray.new('@' * [@bytesToWrite, PayloadSize].min))
+		end
+
+	    @clientProgressBar.maximum = TotalBytes
+	    @clientProgressBar.value = @bytesWritten
+	    @clientStatusLabel.text = tr("Sent %dMB" % 
+	                                 (@bytesWritten / (1024 * 1024)) )
+	end
+	
+	def displayError(socketError)
+	    if socketError == Qt::TcpSocket::RemoteHostClosedError
+	        return
+		end
+	
+	    Qt::MessageBox.information(self, tr("Network error"),
+	                             tr("The following error occurred: %s." %
+	                                 tcpClient.errorString))
+	
+	    @tcpClient.close
+	    @tcpServer.close
+	    @clientProgressBar.reset
+	    @serverProgressBar.reset
+	    @clientStatusLabel.text = tr("Client ready")
+	    @serverStatusLabel.text = tr("Server ready")
+	    @startButton.enabled = true
+	    Qt::Application.restoreOverrideCursor
+	end
+end

data/examples/network/loopback/main.rb

@@ -1,32 +1,32 @@
-=begin
-**
-** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
-**
-** This file is part of the example classes of the Qt Toolkit.
-**
-** This file may be used under the terms of the GNU General Public
-** License version 2.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of
-** this file.  Please review the following information to ensure GNU
-** General Public Licensing requirements will be met:
-** http://www.trolltech.com/products/qt/opensource.html
-**
-** If you are unsure which license is appropriate for your use, please
-** review the following information:
-** http://www.trolltech.com/products/qt/licensing.html or contact the
-** sales department at sales@trolltech.com.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-
-** Translated to QtRuby by Richard Dale
-=end
-
-require 'Qt'
-require './dialog.rb'
-
-app = Qt::Application.new(ARGV)
-dialog = Dialog.new
-dialog.show
-dialog.exec
+=begin
+**
+** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
+**
+** This file is part of the example classes of the Qt Toolkit.
+**
+** This file may be used under the terms of the GNU General Public
+** License version 2.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of
+** this file.  Please review the following information to ensure GNU
+** General Public Licensing requirements will be met:
+** http://www.trolltech.com/products/qt/opensource.html
+**
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://www.trolltech.com/products/qt/licensing.html or contact the
+** sales department at sales@trolltech.com.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+
+** Translated to QtRuby by Richard Dale
+=end
+
+require 'Qt'
+require './dialog.rb'
+
+app = Qt::Application.new(ARGV)
+dialog = Dialog.new
+dialog.show
+dialog.exec

data/examples/opengl/grabber/glwidget.rb

@@ -1,265 +1,265 @@
-=begin
-**
-** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
-**
-** This file is part of the example classes of the Qt Toolkit.
-**
-** This file may be used under the terms of the GNU General Public
-** License version 2.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of
-** this file.  Please review the following information to ensure GNU
-** General Public Licensing requirements will be met:
-** http://www.trolltech.com/products/qt/opensource.html
-**
-** If you are unsure which license is appropriate for your use, please
-** review the following information:
-** http://www.trolltech.com/products/qt/licensing.html or contact the
-** sales department at sales@trolltech.com.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-
-** Translated to QtRuby by Richard Dale
-=end
-    
-require 'opengl'
-include Math
-
-class GLWidget < Qt::GLWidget
-    
-    slots   'setXRotation(int)',
-            'setYRotation(int)',
-            'setZRotation(int)'
-    
-    signals 'xRotationChanged(int)',
-            'yRotationChanged(int)',
-            'zRotationChanged(int)'
-    
-    slots 'advanceGears()'
-
-    def initialize(parent = nil)
-        super(parent)
-        @xRot = 0
-        @yRot = 0
-        @zRot = 0
-        @gear1Rot = 0
-        @lastPos = Qt::Point.new
-    
-        timer = Qt::Timer.new(self)
-        connect(timer, SIGNAL('timeout()'), self, SLOT('advanceGears()'))
-        timer.start(20)
-    end
-
-    def xRotation() return @xRot end
-    def yRotation() return @yRot end
-    def zRotation() return @zRot end
-    
-    def dispose()
-        makeCurrent()
-        GL.DeleteLists(@gear1, 1)
-        GL.DeleteLists(@gear2, 1)
-        GL.DeleteLists(@gear3, 1)
-        super
-    end
-    
-    def setXRotation(angle)
-        angle = normalizeAngle(angle)
-        if angle != @xRot
-            @xRot = angle
-            emit xRotationChanged(angle)
-            updateGL()
-        end
-    end
-    
-    def setYRotation(angle)
-        angle = normalizeAngle(angle)
-        if angle != @yRot
-            @yRot = angle
-            emit yRotationChanged(angle)
-            updateGL()
-        end
-    end
-    
-    def setZRotation(angle)
-        angle = normalizeAngle(angle)
-        if angle != @zRot
-            @zRot = angle
-            emit zRotationChanged(angle)
-            updateGL()
-        end
-    end
-    
-    def initializeGL
-        lightPos = [ 5.0, 5.0, 10.0, 1.0 ]
-        reflectance1 = [ 0.8, 0.1, 0.0, 1.0 ]
-        reflectance2 = [ 0.0, 0.8, 0.2, 1.0 ]
-        reflectance3 = [ 0.2, 0.2, 1.0, 1.0 ]
-    
-        GL.Lightfv(GL::LIGHT0, GL::POSITION, lightPos)
-        GL.Enable(GL::LIGHTING)
-        GL.Enable(GL::LIGHT0)
-        GL.Enable(GL::DEPTH_TEST)
-    
-        @gear1 = makeGear(reflectance1, 1.0, 4.0, 1.0, 0.7, 20)
-        @gear2 = makeGear(reflectance2, 0.5, 2.0, 2.0, 0.7, 10)
-        @gear3 = makeGear(reflectance3, 1.3, 2.0, 0.5, 0.7, 10)
-    
-        GL.Enable(GL::NORMALIZE)
-    end
-    
-    def paintGL()
-        GL.Clear(GL::COLOR_BUFFER_BIT | GL::DEPTH_BUFFER_BIT)
-    
-        GL.PushMatrix
-        GL.Rotated(@xRot / 16.0, 1.0, 0.0, 0.0)
-        GL.Rotated(@yRot / 16.0, 0.0, 1.0, 0.0)
-        GL.Rotated(@zRot / 16.0, 0.0, 0.0, 1.0)
-    
-        drawGear(@gear1, -3.0, -2.0, 0.0, @gear1Rot / 16.0)
-        drawGear(@gear2, +3.1, -2.0, 0.0, -2.0 * (@gear1Rot / 16.0) - 9.0)
-    
-        GL.Rotated(+90.0, 1.0, 0.0, 0.0)
-        drawGear(@gear3, -3.1, -1.8, -2.2, +2.0 * (@gear1Rot / 16.0) - 2.0)
-    
-        GL.PopMatrix
-    end
-    
-    def resizeGL(width, height)
-        side = [width, height].min
-        GL.Viewport((width - side) / 2, (height - side) / 2, side, side)
-    
-        GL.MatrixMode(GL::PROJECTION)
-        GL.LoadIdentity
-        GL.Frustum(-1.0, +1.0, -1.0, 1.0, 5.0, 60.0)
-        GL.MatrixMode(GL::MODELVIEW)
-        GL.LoadIdentity
-        GL.Translated(0.0, 0.0, -40.0)
-    end
-    
-    def mousePressEvent(event)
-        @lastPos = event.pos
-    end
-    
-    def mouseMoveEvent(event)
-        dx = event.x - @lastPos.x
-        dy = event.y - @lastPos.y
-    
-        if event.buttons & Qt::LeftButton.to_i != 0
-            setXRotation(@xRot + 8 * dy)
-            setYRotation(@yRot + 8 * dx)
-        elsif event.buttons & Qt::RightButton.to_i != 0
-            setXRotation(@xRot + 8 * dy)
-            setZRotation(@zRot + 8 * dx)
-        end
-        @lastPos = event.pos
-    end
-    
-    def advanceGears
-        @gear1Rot += 2 * 16
-        updateGL()
-    end
-    
-    def makeGear(reflectance, innerRadius,
-                              outerRadius, thickness,
-                              toothSize, toothCount)
-        list = GL.GenLists(1)
-        GL.NewList(list, GL::COMPILE)
-        GL.Material(GL::FRONT, GL::AMBIENT_AND_DIFFUSE, reflectance)
-    
-        r0 = innerRadius
-        r1 = outerRadius - toothSize / 2.0
-        r2 = outerRadius + toothSize / 2.0
-        delta = (2.0 * PI / toothCount) / 4.0
-        z = thickness / 2.0
-    
-        GL.ShadeModel(GL::FLAT)
-    
-        for i in 0...2
-            sign = (i == 0) ? +1.0 : -1.0
-    
-            GL.Normal3d(0.0, 0.0, sign)
-    
-            GL.Begin(GL::QUAD_STRIP)
-            for j in 0..toothCount
-                angle = 2.0 * PI * j / toothCount
-                GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), sign * z)
-                GL.Vertex3d(r1 * cos(angle), r1 * sin(angle), sign * z)
-                GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), sign * z)
-                GL.Vertex3d(r1 * cos(angle + 3 * delta), r1 * sin(angle + 3 * delta),
-                            sign * z)
-            end
-            GL.End
-    
-            GL.Begin(GL::QUADS)
-            for j in 0...toothCount
-                angle = 2.0 * PI * j / toothCount
-                GL.Vertex3d(r1 * cos(angle), r1 * sin(angle), sign * z)
-                GL.Vertex3d(r2 * cos(angle + delta), r2 * sin(angle + delta),
-                            sign * z)
-                GL.Vertex3d(r2 * cos(angle + 2 * delta), r2 * sin(angle + 2 * delta),
-                            sign * z)
-                GL.Vertex3d(r1 * cos(angle + 3 * delta), r1 * sin(angle + 3 * delta),
-                            sign * z)
-            end
-            GL.End
-        end
-    
-        GL.Begin(GL::QUAD_STRIP)
-        for i in 0...toothCount
-            for j in 0...2
-                angle = 2.0 * PI * (i + (j / 2.0)) / toothCount
-                s1 = r1
-                s2 = r2
-                if j == 1
-                    s1, s2 = s2, s1
-                end
-    
-                GL.Normal3d(cos(angle), sin(angle), 0.0)
-                GL.Vertex3d(s1 * cos(angle), s1 * sin(angle), +z)
-                GL.Vertex3d(s1 * cos(angle), s1 * sin(angle), -z)
-        
-                GL.Normal3d(s2 * sin(angle + delta) - s1 * sin(angle),
-                            s1 * cos(angle) - s2 * cos(angle + delta), 0.0)
-                GL.Vertex3d(s2 * cos(angle + delta), s2 * sin(angle + delta), +z)
-                GL.Vertex3d(s2 * cos(angle + delta), s2 * sin(angle + delta), -z)
-            end
-        end
-        GL.Vertex3d(r1, 0.0, +z)
-        GL.Vertex3d(r1, 0.0, -z)
-        GL.End
-    
-        GL.ShadeModel(GL::SMOOTH)
-    
-        GL.Begin(GL::QUAD_STRIP)
-        for i in 0..toothCount
-            angle = i * 2.0 * PI / toothCount
-            GL.Normal3d(-cos(angle), -sin(angle), 0.0)
-            GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), +z)
-            GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), -z)
-        end
-        GL.End
-    
-        GL.EndList
-    
-        return list
-    end
-    
-    def drawGear(gear, dx, dy, dz, angle)
-        GL.PushMatrix
-        GL.Translated(dx, dy, dz)
-        GL.Rotated(angle, 0.0, 0.0, 1.0)
-        GL.CallList(gear)
-        GL.PopMatrix
-    end
-    
-    def normalizeAngle(angle)
-        while angle < 0 do
-            angle += 360 * 16
-        end
-        while angle > 360 * 16 do
-            angle -= 360 * 16
-        end
-        return angle
-    end
-end
+=begin
+**
+** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
+**
+** This file is part of the example classes of the Qt Toolkit.
+**
+** This file may be used under the terms of the GNU General Public
+** License version 2.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of
+** this file.  Please review the following information to ensure GNU
+** General Public Licensing requirements will be met:
+** http://www.trolltech.com/products/qt/opensource.html
+**
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://www.trolltech.com/products/qt/licensing.html or contact the
+** sales department at sales@trolltech.com.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+
+** Translated to QtRuby by Richard Dale
+=end
+    
+require 'opengl'
+include Math
+
+class GLWidget < Qt::GLWidget
+    
+    slots   'setXRotation(int)',
+            'setYRotation(int)',
+            'setZRotation(int)'
+    
+    signals 'xRotationChanged(int)',
+            'yRotationChanged(int)',
+            'zRotationChanged(int)'
+    
+    slots 'advanceGears()'
+
+    def initialize(parent = nil)
+        super(parent)
+        @xRot = 0
+        @yRot = 0
+        @zRot = 0
+        @gear1Rot = 0
+        @lastPos = Qt::Point.new
+    
+        timer = Qt::Timer.new(self)
+        connect(timer, SIGNAL('timeout()'), self, SLOT('advanceGears()'))
+        timer.start(20)
+    end
+
+    def xRotation() return @xRot end
+    def yRotation() return @yRot end
+    def zRotation() return @zRot end
+    
+    def dispose()
+        makeCurrent()
+        GL.DeleteLists(@gear1, 1)
+        GL.DeleteLists(@gear2, 1)
+        GL.DeleteLists(@gear3, 1)
+        super
+    end
+    
+    def setXRotation(angle)
+        angle = normalizeAngle(angle)
+        if angle != @xRot
+            @xRot = angle
+            emit xRotationChanged(angle)
+            updateGL()
+        end
+    end
+    
+    def setYRotation(angle)
+        angle = normalizeAngle(angle)
+        if angle != @yRot
+            @yRot = angle
+            emit yRotationChanged(angle)
+            updateGL()
+        end
+    end
+    
+    def setZRotation(angle)
+        angle = normalizeAngle(angle)
+        if angle != @zRot
+            @zRot = angle
+            emit zRotationChanged(angle)
+            updateGL()
+        end
+    end
+    
+    def initializeGL
+        lightPos = [ 5.0, 5.0, 10.0, 1.0 ]
+        reflectance1 = [ 0.8, 0.1, 0.0, 1.0 ]
+        reflectance2 = [ 0.0, 0.8, 0.2, 1.0 ]
+        reflectance3 = [ 0.2, 0.2, 1.0, 1.0 ]
+    
+        GL.Lightfv(GL::LIGHT0, GL::POSITION, lightPos)
+        GL.Enable(GL::LIGHTING)
+        GL.Enable(GL::LIGHT0)
+        GL.Enable(GL::DEPTH_TEST)
+    
+        @gear1 = makeGear(reflectance1, 1.0, 4.0, 1.0, 0.7, 20)
+        @gear2 = makeGear(reflectance2, 0.5, 2.0, 2.0, 0.7, 10)
+        @gear3 = makeGear(reflectance3, 1.3, 2.0, 0.5, 0.7, 10)
+    
+        GL.Enable(GL::NORMALIZE)
+    end
+    
+    def paintGL()
+        GL.Clear(GL::COLOR_BUFFER_BIT | GL::DEPTH_BUFFER_BIT)
+    
+        GL.PushMatrix
+        GL.Rotated(@xRot / 16.0, 1.0, 0.0, 0.0)
+        GL.Rotated(@yRot / 16.0, 0.0, 1.0, 0.0)
+        GL.Rotated(@zRot / 16.0, 0.0, 0.0, 1.0)
+    
+        drawGear(@gear1, -3.0, -2.0, 0.0, @gear1Rot / 16.0)
+        drawGear(@gear2, +3.1, -2.0, 0.0, -2.0 * (@gear1Rot / 16.0) - 9.0)
+    
+        GL.Rotated(+90.0, 1.0, 0.0, 0.0)
+        drawGear(@gear3, -3.1, -1.8, -2.2, +2.0 * (@gear1Rot / 16.0) - 2.0)
+    
+        GL.PopMatrix
+    end
+    
+    def resizeGL(width, height)
+        side = [width, height].min
+        GL.Viewport((width - side) / 2, (height - side) / 2, side, side)
+    
+        GL.MatrixMode(GL::PROJECTION)
+        GL.LoadIdentity
+        GL.Frustum(-1.0, +1.0, -1.0, 1.0, 5.0, 60.0)
+        GL.MatrixMode(GL::MODELVIEW)
+        GL.LoadIdentity
+        GL.Translated(0.0, 0.0, -40.0)
+    end
+    
+    def mousePressEvent(event)
+        @lastPos = event.pos
+    end
+    
+    def mouseMoveEvent(event)
+        dx = event.x - @lastPos.x
+        dy = event.y - @lastPos.y
+    
+        if event.buttons & Qt::LeftButton.to_i != 0
+            setXRotation(@xRot + 8 * dy)
+            setYRotation(@yRot + 8 * dx)
+        elsif event.buttons & Qt::RightButton.to_i != 0
+            setXRotation(@xRot + 8 * dy)
+            setZRotation(@zRot + 8 * dx)
+        end
+        @lastPos = event.pos
+    end
+    
+    def advanceGears
+        @gear1Rot += 2 * 16
+        updateGL()
+    end
+    
+    def makeGear(reflectance, innerRadius,
+                              outerRadius, thickness,
+                              toothSize, toothCount)
+        list = GL.GenLists(1)
+        GL.NewList(list, GL::COMPILE)
+        GL.Material(GL::FRONT, GL::AMBIENT_AND_DIFFUSE, reflectance)
+    
+        r0 = innerRadius
+        r1 = outerRadius - toothSize / 2.0
+        r2 = outerRadius + toothSize / 2.0
+        delta = (2.0 * PI / toothCount) / 4.0
+        z = thickness / 2.0
+    
+        GL.ShadeModel(GL::FLAT)
+    
+        for i in 0...2
+            sign = (i == 0) ? +1.0 : -1.0
+    
+            GL.Normal3d(0.0, 0.0, sign)
+    
+            GL.Begin(GL::QUAD_STRIP)
+            for j in 0..toothCount
+                angle = 2.0 * PI * j / toothCount
+                GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), sign * z)
+                GL.Vertex3d(r1 * cos(angle), r1 * sin(angle), sign * z)
+                GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), sign * z)
+                GL.Vertex3d(r1 * cos(angle + 3 * delta), r1 * sin(angle + 3 * delta),
+                            sign * z)
+            end
+            GL.End
+    
+            GL.Begin(GL::QUADS)
+            for j in 0...toothCount
+                angle = 2.0 * PI * j / toothCount
+                GL.Vertex3d(r1 * cos(angle), r1 * sin(angle), sign * z)
+                GL.Vertex3d(r2 * cos(angle + delta), r2 * sin(angle + delta),
+                            sign * z)
+                GL.Vertex3d(r2 * cos(angle + 2 * delta), r2 * sin(angle + 2 * delta),
+                            sign * z)
+                GL.Vertex3d(r1 * cos(angle + 3 * delta), r1 * sin(angle + 3 * delta),
+                            sign * z)
+            end
+            GL.End
+        end
+    
+        GL.Begin(GL::QUAD_STRIP)
+        for i in 0...toothCount
+            for j in 0...2
+                angle = 2.0 * PI * (i + (j / 2.0)) / toothCount
+                s1 = r1
+                s2 = r2
+                if j == 1
+                    s1, s2 = s2, s1
+                end
+    
+                GL.Normal3d(cos(angle), sin(angle), 0.0)
+                GL.Vertex3d(s1 * cos(angle), s1 * sin(angle), +z)
+                GL.Vertex3d(s1 * cos(angle), s1 * sin(angle), -z)
+        
+                GL.Normal3d(s2 * sin(angle + delta) - s1 * sin(angle),
+                            s1 * cos(angle) - s2 * cos(angle + delta), 0.0)
+                GL.Vertex3d(s2 * cos(angle + delta), s2 * sin(angle + delta), +z)
+                GL.Vertex3d(s2 * cos(angle + delta), s2 * sin(angle + delta), -z)
+            end
+        end
+        GL.Vertex3d(r1, 0.0, +z)
+        GL.Vertex3d(r1, 0.0, -z)
+        GL.End
+    
+        GL.ShadeModel(GL::SMOOTH)
+    
+        GL.Begin(GL::QUAD_STRIP)
+        for i in 0..toothCount
+            angle = i * 2.0 * PI / toothCount
+            GL.Normal3d(-cos(angle), -sin(angle), 0.0)
+            GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), +z)
+            GL.Vertex3d(r0 * cos(angle), r0 * sin(angle), -z)
+        end
+        GL.End
+    
+        GL.EndList
+    
+        return list
+    end
+    
+    def drawGear(gear, dx, dy, dz, angle)
+        GL.PushMatrix
+        GL.Translated(dx, dy, dz)
+        GL.Rotated(angle, 0.0, 0.0, 1.0)
+        GL.CallList(gear)
+        GL.PopMatrix
+    end
+    
+    def normalizeAngle(angle)
+        while angle < 0 do
+            angle += 360 * 16
+        end
+        while angle > 360 * 16 do
+            angle -= 360 * 16
+        end
+        return angle
+    end
+end