qtbindings 4.8.6.0-x86-mingw32 → 4.8.6.1-x86-mingw32

data/examples/qdbus/pingpong/ping-common.rb

@@ -1 +1 @@
-SERVICE_NAME = "com.trolltech.QtDBus.PingExample"
+SERVICE_NAME = "com.trolltech.QtDBus.PingExample"

data/examples/qdbus/pingpong/ping.rb

@@ -1,52 +1,52 @@
-=begin
-**
-** Copyright (C) 2004-2006 Trolltech AS. All rights reserved.
-**
-** This file is part of the example classes of the Qt Toolkit.
-**
-** This file may be used under the terms of the GNU General Public
-** License version 2.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of
-** this file.  Please review the following information to ensure GNU
-** General Public Licensing requirements will be met:
-** http://www.trolltech.com/products/qt/opensource.html
-**
-** If you are unsure which license is appropriate for your use, please
-** review the following information:
-** http://www.trolltech.com/products/qt/licensing.html or contact the
-** sales department at sales@trolltech.com.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-
-** Translated to QtRuby by Richard Dale
-=end
-
-require 'Qt'
-require './ping-common.rb'
-	
-app = Qt::CoreApplication.new(ARGV)
-	
-if !Qt::DBusConnection.sessionBus.connected?
-	$stderr.puts("Cannot connect to the D-BUS session bus.\n" \
-	                "To start it, run:\n" \
-	                "\teval `dbus-launch --auto-syntax`\n")
-	exit(1)
-end
-	
-iface = Qt::DBusInterface.new(SERVICE_NAME, "/", "", Qt::DBusConnection.sessionBus)
-if iface.valid?
-	message = iface.call("ping", ARGV.length > 0 ? ARGV[0] : "")
-	reply = Qt::DBusReply.new(message)
-	if reply.valid?
-		puts("Reply was: %s\n" % reply.value)
-		exit(0)
-	end
-	
-	$stderr.puts("Call failed: %s\n" % reply.error.message)
-	exit(1)
-end
-	
-$stderr.puts("%s\n" % Qt::DBusConnection.sessionBus.lastError.message)
-exit(1)
+=begin
+**
+** Copyright (C) 2004-2006 Trolltech AS. All rights reserved.
+**
+** This file is part of the example classes of the Qt Toolkit.
+**
+** This file may be used under the terms of the GNU General Public
+** License version 2.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of
+** this file.  Please review the following information to ensure GNU
+** General Public Licensing requirements will be met:
+** http://www.trolltech.com/products/qt/opensource.html
+**
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://www.trolltech.com/products/qt/licensing.html or contact the
+** sales department at sales@trolltech.com.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+
+** Translated to QtRuby by Richard Dale
+=end
+
+require 'Qt'
+require './ping-common.rb'
+	
+app = Qt::CoreApplication.new(ARGV)
+	
+if !Qt::DBusConnection.sessionBus.connected?
+	$stderr.puts("Cannot connect to the D-BUS session bus.\n" \
+	                "To start it, run:\n" \
+	                "\teval `dbus-launch --auto-syntax`\n")
+	exit(1)
+end
+	
+iface = Qt::DBusInterface.new(SERVICE_NAME, "/", "", Qt::DBusConnection.sessionBus)
+if iface.valid?
+	message = iface.call("ping", ARGV.length > 0 ? ARGV[0] : "")
+	reply = Qt::DBusReply.new(message)
+	if reply.valid?
+		puts("Reply was: %s\n" % reply.value)
+		exit(0)
+	end
+	
+	$stderr.puts("Call failed: %s\n" % reply.error.message)
+	exit(1)
+end
+	
+$stderr.puts("%s\n" % Qt::DBusConnection.sessionBus.lastError.message)
+exit(1)

data/examples/qdbus/pingpong/pong.rb

@@ -1,55 +1,55 @@
-=begin
-**
-** Copyright (C) 2004-2006 Trolltech AS. All rights reserved.
-**
-** This file is part of the example classes of the Qt Toolkit.
-**
-** This file may be used under the terms of the GNU General Public
-** License version 2.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of
-** this file.  Please review the following information to ensure GNU
-** General Public Licensing requirements will be met:
-** http://www.trolltech.com/products/qt/opensource.html
-**
-** If you are unsure which license is appropriate for your use, please
-** review the following information:
-** http://www.trolltech.com/products/qt/licensing.html or contact the
-** sales department at sales@trolltech.com.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-
-** Translated to QtRuby by Richard Dale
-=end
-
-require 'Qt'
-require './ping-common.rb'
-
-class Pong < Qt::Object
-	slots 'QString ping(const QString&)'
-	
-	def ping(arg)
-	    Qt::MetaObject.invokeMethod(Qt::CoreApplication.instance(), "quit")
-	    return 'ping("' + arg +'") got called'
-	end
-end
-	
-app = Qt::CoreApplication.new(ARGV)
-	
-if !Qt::DBusConnection::sessionBus.connected?
-	$stderr.puts("Cannot connect to the D-BUS session bus.\n" \
-	                "To start it, run:\n" \
-	                "\teval `dbus-launch --auto-syntax`\n")
-	exit(1)
-end
-	
-if !Qt::DBusConnection.sessionBus.registerService(SERVICE_NAME)
-	$stderr.puts("%s\n" %  Qt::DBusConnection.sessionBus.lastError.message)
-	exit(1)
-end
-	
-pong = Pong.new
-Qt::DBusConnection.sessionBus.registerObject("/", pong, Qt::DBusConnection::ExportAllSlots)
-	    
-app.exec()
+=begin
+**
+** Copyright (C) 2004-2006 Trolltech AS. All rights reserved.
+**
+** This file is part of the example classes of the Qt Toolkit.
+**
+** This file may be used under the terms of the GNU General Public
+** License version 2.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of
+** this file.  Please review the following information to ensure GNU
+** General Public Licensing requirements will be met:
+** http://www.trolltech.com/products/qt/opensource.html
+**
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://www.trolltech.com/products/qt/licensing.html or contact the
+** sales department at sales@trolltech.com.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+
+** Translated to QtRuby by Richard Dale
+=end
+
+require 'Qt'
+require './ping-common.rb'
+
+class Pong < Qt::Object
+	slots 'QString ping(const QString&)'
+	
+	def ping(arg)
+	    Qt::MetaObject.invokeMethod(Qt::CoreApplication.instance(), "quit")
+	    return 'ping("' + arg +'") got called'
+	end
+end
+	
+app = Qt::CoreApplication.new(ARGV)
+	
+if !Qt::DBusConnection::sessionBus.connected?
+	$stderr.puts("Cannot connect to the D-BUS session bus.\n" \
+	                "To start it, run:\n" \
+	                "\teval `dbus-launch --auto-syntax`\n")
+	exit(1)
+end
+	
+if !Qt::DBusConnection.sessionBus.registerService(SERVICE_NAME)
+	$stderr.puts("%s\n" %  Qt::DBusConnection.sessionBus.lastError.message)
+	exit(1)
+end
+	
+pong = Pong.new
+Qt::DBusConnection.sessionBus.registerObject("/", pong, Qt::DBusConnection::ExportAllSlots)
+	    
+app.exec()

data/examples/qdbus/remotecontrolledcar/car/car.rb

@@ -1,151 +1,151 @@
-=begin
-**
-** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
-**
-** This file is part of the example classes of the Qt Toolkit.
-**
-** This file may be used under the terms of the GNU General Public
-** License version 2.0 as published by the Free Software Foundation
-** and appearing in the file LICENSE.GPL included in the packaging of
-** this file.  Please review the following information to ensure GNU
-** General Public Licensing requirements will be met:
-** http://www.trolltech.com/products/qt/opensource.html
-**
-** If you are unsure which license is appropriate for your use, please
-** review the following information:
-** http://www.trolltech.com/products/qt/licensing.html or contact the
-** sales department at sales@trolltech.com.
-**
-** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
-** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-**
-
-** Translated to QtRuby by Richard Dale
-=end
-    
-
-class CarAdaptor < Qt::Object
-    q_classinfo("D-Bus Interface", "com.trolltech.Examples.CarInterface")
-
-    slots :accelerate, :decelerate, :turnLeft, :turnRight
-    signals :crashed
-
-    def initialize(car)
-        super()
-		@car = car
-        startTimer(1000 / 33)
-    end
-    
-    def accelerate
-        @car.accelerate
-    end
-    
-    def decelerate
-        @car.decelerate
-    end
-    
-    def turnLeft
-        @car.turnLeft
-    end
-    
-    def turnRight
-        @car.turnRight
-    end
-    
-    def timerEvent(event)
-        @car.timerEvent(event)
-    end
- end
-
-# Note that as Ruby doesn't have multiple inheritance, and 'Car', can't inherit from 
-# Qt::Object as well as Qt::Graphics item. So the timerEvent event handling is done
-# in the CarAdaptor instance which is a Qt::Object, which calls back to the Car
-# instance.
-#
-class Car < Qt::GraphicsItem
-    def boundingRect()
-        return Qt::RectF.new(-35, -81, 70, 115)
-    end
-    
-    def initialize()
-        super
-        @color = Qt::Brush.new(Qt::green)
-        @wheelsAngle = 0.0 
-        @speed = 0.0
-        setFlag(Qt::GraphicsItem::ItemIsMovable, true)
-        setFlag(Qt::GraphicsItem::ItemIsFocusable, true)
-    end
-    
-    def accelerate()
-        if @speed < 10
-            @speed += 1
-        end
-    end
-    
-    def decelerate()
-        if @speed > -10
-            @speed -= 1
-        end
-    end
-    
-    def turnLeft()
-        if @wheelsAngle > -30
-            @wheelsAngle -= 5
-        end
-    end
-    
-    def turnRight()
-        if @wheelsAngle < 30
-           @wheelsAngle += 5
-        end
-    end
-    
-    def paint(painter, option, widget)
-        painter.brush = Qt::Brush.new(Qt::gray)
-        painter.drawRect(-20, -58, 40, 2) # front axel
-        painter.drawRect(-20, 7, 40, 2) # rear axel
-    
-        painter.brush = @color
-        painter.drawRect(-25, -79, 50, 10) # front wing
-    
-        painter.drawEllipse(-25, -48, 50, 20) # side pods
-        painter.drawRect(-25, -38, 50, 35) # side pods
-        painter.drawRect(-5, 9, 10, 10) # back pod
-    
-        painter.drawEllipse(-10, -81, 20, 100) # main body
-    
-        painter.drawRect(-17, 19, 34, 15) # rear wing
-    
-        painter.brush = Qt::Brush.new(Qt::black)
-        painter.drawPie(-5, -51, 10, 15, 0, 180 * 16)
-        painter.drawRect(-5, -44, 10, 10) # cocpit
-    
-        painter.save()
-        painter.translate(-20, -58)
-        painter.rotate(@wheelsAngle)
-        painter.drawRect(-10, -7, 10, 15) # front left
-        painter.restore()
-    
-        painter.save()
-        painter.translate(20, -58)
-        painter.rotate(@wheelsAngle)
-        painter.drawRect(0, -7, 10, 15) # front left
-        painter.restore()
-    
-        painter.drawRect(-30, 0, 12, 17) # rear left
-        painter.drawRect(19, 0, 12, 17)  # rear right
-    end
-    
-    def timerEvent(event)
-        axelDistance = 54
-        wheelsAngleRads = (@wheelsAngle * Math::PI) / 180
-        turnDistance = Math.cos(wheelsAngleRads) * axelDistance * 2
-        turnRateRads = wheelsAngleRads / turnDistance  # rough estimate
-        turnRate = (turnRateRads * 180) / Math::PI
-        rotation = @speed * turnRate
-        
-        rotate(rotation)
-        translate(0, -@speed)
-        update()
-    end
-end
+=begin
+**
+** Copyright (C) 2004-2005 Trolltech AS. All rights reserved.
+**
+** This file is part of the example classes of the Qt Toolkit.
+**
+** This file may be used under the terms of the GNU General Public
+** License version 2.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of
+** this file.  Please review the following information to ensure GNU
+** General Public Licensing requirements will be met:
+** http://www.trolltech.com/products/qt/opensource.html
+**
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://www.trolltech.com/products/qt/licensing.html or contact the
+** sales department at sales@trolltech.com.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+
+** Translated to QtRuby by Richard Dale
+=end
+    
+
+class CarAdaptor < Qt::Object
+    q_classinfo("D-Bus Interface", "com.trolltech.Examples.CarInterface")
+
+    slots :accelerate, :decelerate, :turnLeft, :turnRight
+    signals :crashed
+
+    def initialize(car)
+        super()
+		@car = car
+        startTimer(1000 / 33)
+    end
+    
+    def accelerate
+        @car.accelerate
+    end
+    
+    def decelerate
+        @car.decelerate
+    end
+    
+    def turnLeft
+        @car.turnLeft
+    end
+    
+    def turnRight
+        @car.turnRight
+    end
+    
+    def timerEvent(event)
+        @car.timerEvent(event)
+    end
+ end
+
+# Note that as Ruby doesn't have multiple inheritance, and 'Car', can't inherit from 
+# Qt::Object as well as Qt::Graphics item. So the timerEvent event handling is done
+# in the CarAdaptor instance which is a Qt::Object, which calls back to the Car
+# instance.
+#
+class Car < Qt::GraphicsItem
+    def boundingRect()
+        return Qt::RectF.new(-35, -81, 70, 115)
+    end
+    
+    def initialize()
+        super
+        @color = Qt::Brush.new(Qt::green)
+        @wheelsAngle = 0.0 
+        @speed = 0.0
+        setFlag(Qt::GraphicsItem::ItemIsMovable, true)
+        setFlag(Qt::GraphicsItem::ItemIsFocusable, true)
+    end
+    
+    def accelerate()
+        if @speed < 10
+            @speed += 1
+        end
+    end
+    
+    def decelerate()
+        if @speed > -10
+            @speed -= 1
+        end
+    end
+    
+    def turnLeft()
+        if @wheelsAngle > -30
+            @wheelsAngle -= 5
+        end
+    end
+    
+    def turnRight()
+        if @wheelsAngle < 30
+           @wheelsAngle += 5
+        end
+    end
+    
+    def paint(painter, option, widget)
+        painter.brush = Qt::Brush.new(Qt::gray)
+        painter.drawRect(-20, -58, 40, 2) # front axel
+        painter.drawRect(-20, 7, 40, 2) # rear axel
+    
+        painter.brush = @color
+        painter.drawRect(-25, -79, 50, 10) # front wing
+    
+        painter.drawEllipse(-25, -48, 50, 20) # side pods
+        painter.drawRect(-25, -38, 50, 35) # side pods
+        painter.drawRect(-5, 9, 10, 10) # back pod
+    
+        painter.drawEllipse(-10, -81, 20, 100) # main body
+    
+        painter.drawRect(-17, 19, 34, 15) # rear wing
+    
+        painter.brush = Qt::Brush.new(Qt::black)
+        painter.drawPie(-5, -51, 10, 15, 0, 180 * 16)
+        painter.drawRect(-5, -44, 10, 10) # cocpit
+    
+        painter.save()
+        painter.translate(-20, -58)
+        painter.rotate(@wheelsAngle)
+        painter.drawRect(-10, -7, 10, 15) # front left
+        painter.restore()
+    
+        painter.save()
+        painter.translate(20, -58)
+        painter.rotate(@wheelsAngle)
+        painter.drawRect(0, -7, 10, 15) # front left
+        painter.restore()
+    
+        painter.drawRect(-30, 0, 12, 17) # rear left
+        painter.drawRect(19, 0, 12, 17)  # rear right
+    end
+    
+    def timerEvent(event)
+        axelDistance = 54
+        wheelsAngleRads = (@wheelsAngle * Math::PI) / 180
+        turnDistance = Math.cos(wheelsAngleRads) * axelDistance * 2
+        turnRateRads = wheelsAngleRads / turnDistance  # rough estimate
+        turnRate = (turnRateRads * 180) / Math::PI
+        rotation = @speed * turnRate
+        
+        rotate(rotation)
+        translate(0, -@speed)
+        update()
+    end
+end