passenger 5.0.8 → 5.0.9

data/ext/libeio/missing

@@ -1,376 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:

data/ext/libeio/xthread.h

@@ -1,166 +0,0 @@
-#ifndef XTHREAD_H_
-#define XTHREAD_H_
-
-/* whether word reads are potentially non-atomic.
- * this is conservative, likely most arches this runs
- * on have atomic word read/writes.
- */
-#ifndef WORDACCESS_UNSAFE
-# if __i386 || __x86_64
-#  define WORDACCESS_UNSAFE 0
-# else
-#  define WORDACCESS_UNSAFE 1
-# endif
-#endif
-
-/////////////////////////////////////////////////////////////////////////////
-
-#ifdef _WIN32
-
-#define NTDDI_VERSION NTDDI_WIN2K // needed to get win2000 api calls
-#define _WIN32_WINNT 0x400
-#include <stdio.h>//D
-#include <fcntl.h>
-#include <io.h>
-#include <time.h>
-#include <winsock2.h>
-#include <process.h>
-#include <windows.h>
-#include <pthread.h>
-#define sigset_t int
-#define sigfillset(a)
-#define pthread_sigmask(a,b,c)
-#define sigaddset(a,b)
-#define sigemptyset(s)
-
-typedef pthread_mutex_t xmutex_t;
-#define X_MUTEX_INIT           PTHREAD_MUTEX_INITIALIZER
-#define X_MUTEX_CREATE(mutex)  pthread_mutex_init (&(mutex), 0)
-#define X_LOCK(mutex)          pthread_mutex_lock (&(mutex))
-#define X_UNLOCK(mutex)        pthread_mutex_unlock (&(mutex))
-
-typedef pthread_cond_t xcond_t;
-#define X_COND_INIT                     PTHREAD_COND_INITIALIZER
-#define X_COND_CREATE(cond)		pthread_cond_init (&(cond), 0)
-#define X_COND_SIGNAL(cond)             pthread_cond_signal (&(cond))
-#define X_COND_WAIT(cond,mutex)         pthread_cond_wait (&(cond), &(mutex))
-#define X_COND_TIMEDWAIT(cond,mutex,to) pthread_cond_timedwait (&(cond), &(mutex), &(to))
-
-typedef pthread_t xthread_t;
-#define X_THREAD_PROC(name) static void *name (void *thr_arg)
-#define X_THREAD_ATFORK(a,b,c)
-
-static int
-xthread_create (xthread_t *tid, void *(*proc)(void *), void *arg)
-{
-  int retval;
-  pthread_attr_t attr;
-
-  pthread_attr_init (&attr);
-  pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED);
-
-  retval = pthread_create (tid, &attr, proc, arg) == 0;
-
-  pthread_attr_destroy (&attr);
-
-  return retval;
-}
-
-#define respipe_read(a,b,c)  PerlSock_recv ((a), (b), (c), 0)
-#define respipe_write(a,b,c) send ((a), (b), (c), 0)
-#define respipe_close(a)     PerlSock_closesocket ((a))
-
-#else
-/////////////////////////////////////////////////////////////////////////////
-
-#if __linux && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-
-/* just in case */
-#define _REENTRANT 1
-
-#if __solaris
-# define _POSIX_PTHREAD_SEMANTICS 1
-/* try to bribe solaris headers into providing a current pthread API
- * despite environment being configured for an older version.
- */
-# define __EXTENSIONS__ 1
-#endif
-
-#include <unistd.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <limits.h>
-#include <pthread.h>
-
-typedef pthread_mutex_t xmutex_t;
-#if __linux && defined (PTHREAD_ADAPTIVE_MUTEX_INITIALIZER_NP)
-# define X_MUTEX_INIT		PTHREAD_ADAPTIVE_MUTEX_INITIALIZER_NP
-# define X_MUTEX_CREATE(mutex)						\
-  do {									\
-    pthread_mutexattr_t attr;						\
-    pthread_mutexattr_init (&attr);					\
-    pthread_mutexattr_settype (&attr, PTHREAD_MUTEX_ADAPTIVE_NP);	\
-    pthread_mutex_init (&(mutex), &attr);				\
-  } while (0)
-#else
-# define X_MUTEX_INIT		PTHREAD_MUTEX_INITIALIZER
-# define X_MUTEX_CREATE(mutex)	pthread_mutex_init (&(mutex), 0)
-#endif
-#define X_LOCK(mutex)		pthread_mutex_lock   (&(mutex))
-#define X_UNLOCK(mutex)		pthread_mutex_unlock (&(mutex))
-
-typedef pthread_cond_t xcond_t;
-#define X_COND_INIT			PTHREAD_COND_INITIALIZER
-#define X_COND_CREATE(cond)		pthread_cond_init (&(cond), 0)
-#define X_COND_SIGNAL(cond)		pthread_cond_signal (&(cond))
-#define X_COND_WAIT(cond,mutex)		pthread_cond_wait (&(cond), &(mutex))
-#define X_COND_TIMEDWAIT(cond,mutex,to)	pthread_cond_timedwait (&(cond), &(mutex), &(to))
-
-typedef pthread_t xthread_t;
-#define X_THREAD_PROC(name) static void *name (void *thr_arg)
-#define X_THREAD_ATFORK(prepare,parent,child) pthread_atfork (prepare, parent, child)
-
-// the broken bsd's once more
-#ifndef PTHREAD_STACK_MIN
-# define PTHREAD_STACK_MIN 0
-#endif
-
-#ifndef X_STACKSIZE
-# define X_STACKSIZE sizeof (void *) * 4096
-#endif
-
-static int
-xthread_create (xthread_t *tid, void *(*proc)(void *), void *arg)
-{
-  int retval;
-  sigset_t fullsigset, oldsigset;
-  pthread_attr_t attr;
-
-  pthread_attr_init (&attr);
-  pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED);
-  pthread_attr_setstacksize (&attr, PTHREAD_STACK_MIN < X_STACKSIZE ? X_STACKSIZE : PTHREAD_STACK_MIN);
-#ifdef PTHREAD_SCOPE_PROCESS
-  pthread_attr_setscope (&attr, PTHREAD_SCOPE_PROCESS);
-#endif
-
-  sigfillset (&fullsigset);
-
-  pthread_sigmask (SIG_SETMASK, &fullsigset, &oldsigset);
-  retval = pthread_create (tid, &attr, proc, arg) == 0;
-  pthread_sigmask (SIG_SETMASK, &oldsigset, 0);
-
-  pthread_attr_destroy (&attr);
-
-  return retval;
-}
-
-#define respipe_read(a,b,c)  read  ((a), (b), (c))
-#define respipe_write(a,b,c) write ((a), (b), (c))
-#define respipe_close(a)     close ((a))
-
-#endif
-
-#endif
-