openstudio-standards 0.2.12.rc5 → 0.2.13

data/lib/openstudio-standards/prototypes/deer/deer.Model.rb

@@ -20,4 +20,4 @@ class DEER
     economizer_type = 'FixedDryBulb'
     return economizer_type
   end
-end
+end

data/lib/openstudio-standards/refs/references.rb

@@ -8,8 +8,8 @@
 #   # @ref [References::ASHRAE9012004] section G.3.1, table 3
 #   def some_method()
 #     ...
-module References
 
+module References
   # ASHRAE 90.1-2004
   # @see https://www.techstreet.com/ashrae/standards/ashrae-90-1-2004-i-p?product_id=1199725 Purchase in the ASHRAE Bookstore
   class ASHRAE9012004; end
@@ -30,6 +30,10 @@ module References
   # @see https://www.techstreet.com/ashrae/standards/ashrae-90-1-2016-i-p?product_id=1931793 Purchase in the ASHRAE Bookstore
   class ASHRAE9012016; end
 
+  # ASHRAE 90.1-2019
+  # @see https://www.techstreet.com/ashrae/standards/ashrae-90-1-2019-i-p?product_id=2088527 Purchase in the ASHRAE Bookstore
+  class ASHRAE9012019; end
+
   # NREL ZNE Ready 2017.
   # This is not an actual code or standard, but rather describes what NREL believes
   # to be a reasonable set of assumptions for achieving a building that is Zero Net Energy Ready
@@ -114,5 +118,4 @@ module References
   # Carlos Duarte cduarte@berkeley.edu
   # @see https://cbe.berkeley.edu/project/optimizing-radiant-systems-energy-efficiency-comfort/
   class CBERadiantSystems; end
-
 end

data/lib/openstudio-standards/standards/Standards.AirLoopHVAC.rb

@@ -13,7 +13,7 @@ class Standard
     # First time adjustment:
     # Only applies to multi-zone vav systems
     # exclusion: for Outpatient: (1) both AHU1 and AHU2 in 'DOE Ref Pre-1980' and 'DOE Ref 1980-2004'
-    # (2) AHU1 in 2004-2013
+    # (2) AHU1 in 2004-2019
     # TODO refactor: move building-type-specific code to Prototype classes
     if air_loop_hvac_multizone_vav_system?(air_loop_hvac) && !(air_loop_hvac.name.to_s.include? 'Outpatient F1')
       air_loop_hvac_adjust_minimum_vav_damper_positions(air_loop_hvac)
@@ -31,6 +31,15 @@ class Standard
   # @todo nightcycle control
   # @todo night fan shutoff
   def air_loop_hvac_apply_standard_controls(air_loop_hvac, climate_zone)
+    # Unoccupied shutdown
+    # Apply this before ERV because it modifies annual hours of operation which can impact ERV requirements
+    if air_loop_hvac_unoccupied_fan_shutoff_required?(air_loop_hvac)
+      occ_threshold = air_loop_hvac_unoccupied_threshold
+      air_loop_hvac_enable_unoccupied_fan_shutoff(air_loop_hvac, min_occ_pct = occ_threshold)
+    else
+      air_loop_hvac.setAvailabilitySchedule(air_loop_hvac.model.alwaysOnDiscreteSchedule)
+    end
+
     # Energy Recovery Ventilation
     if air_loop_hvac_energy_recovery_ventilator_required?(air_loop_hvac, climate_zone)
       air_loop_hvac_apply_energy_recovery_ventilator(air_loop_hvac, climate_zone)
@@ -117,25 +126,24 @@ class Standard
     end
 
     # SAT reset
-    # TODO Prototype buildings use OAT-based SAT reset,
-    # but PRM RM suggests Warmest zone based SAT reset.
     if air_loop_hvac_supply_air_temperature_reset_required?(air_loop_hvac, climate_zone)
-      air_loop_hvac_enable_supply_air_temperature_reset_warmest_zone(air_loop_hvac)
-    end
-
-    # Unoccupied shutdown
-    if air_loop_hvac_unoccupied_fan_shutoff_required?(air_loop_hvac)
-      occ_threshold = air_loop_hvac_unoccupied_threshold
-      air_loop_hvac_enable_unoccupied_fan_shutoff(air_loop_hvac, min_occ_pct = occ_threshold)
-    else
-      air_loop_hvac.setAvailabilitySchedule(air_loop_hvac.model.alwaysOnDiscreteSchedule)
+      reset_type = air_loop_hvac_supply_air_temperature_reset_type(air_loop_hvac)
+      case reset_type
+        when 'warmest_zone'
+          air_loop_hvac_enable_supply_air_temperature_reset_warmest_zone(air_loop_hvac)
+        when 'oa'
+          air_loop_hvac_enable_supply_air_temperature_reset_outdoor_temperature(air_loop_hvac)
+        else
+          OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "No SAT reset for #{air_loop_hvac.name}.")
+      end
     end
 
     # Motorized OA damper
     if air_loop_hvac_motorized_oa_damper_required?(air_loop_hvac, climate_zone)
       # Assume that the availability schedule has already been
       # set to reflect occupancy and use this for the OA damper.
-      air_loop_hvac_add_motorized_oa_damper(air_loop_hvac, 0.15, air_loop_hvac.availabilitySchedule)
+      occ_threshold = air_loop_hvac_unoccupied_threshold
+      air_loop_hvac_add_motorized_oa_damper(air_loop_hvac, occ_threshold, air_loop_hvac.availabilitySchedule)
     else
       air_loop_hvac_remove_motorized_oa_damper(air_loop_hvac)
     end
@@ -201,7 +209,7 @@ class Standard
 
     # data centers don't require optimum start as generally not occupied
     return opt_start_required if air_loop_hvac.name.to_s.include?('CRAH') ||
-        air_loop_hvac.name.to_s.include?('CRAC')
+                                 air_loop_hvac.name.to_s.include?('CRAC')
 
     # Get design supply air flow rate (whether autosized or hard-sized)
     dsn_air_flow_m3_per_s = 0
@@ -236,6 +244,7 @@ class Standard
     air_loop_hvac.thermalZones.each do |zone|
       # Skip zones with no thermostat
       next if zone.thermostatSetpointDualSetpoint.empty?
+
       # Get the heating and cooling setpoint schedules
       tstat = zone.thermostatSetpointDualSetpoint.get
       htg_sch = nil
@@ -264,8 +273,8 @@ class Standard
 
     # Sensors
     oat_db_c_sen = OpenStudio::Model::EnergyManagementSystemSensor.new(air_loop_hvac.model, 'Site Outdoor Air Drybulb Temperature')
-    oat_db_c_sen.setName("OAT")
-    oat_db_c_sen.setKeyName("Environment")
+    oat_db_c_sen.setName('OAT')
+    oat_db_c_sen.setKeyName('Environment')
 
     # Make a program for each unique set of schedules.
     # For most air loops, all zones will have the same
@@ -355,6 +364,7 @@ class Standard
     # Adjust each terminal fan
     air_loop_hvac.demandComponents.each do |dc|
       next if dc.to_AirTerminalSingleDuctParallelPIUReheat.empty?
+
       pfp_term = dc.to_AirTerminalSingleDuctParallelPIUReheat.get
       air_terminal_single_duct_parallel_piu_reheat_apply_prm_baseline_fan_power(pfp_term)
     end
@@ -464,7 +474,7 @@ class Standard
         end
       elsif comp.to_AirLoopHVACUnitarySystem.is_initialized
         fan = comp.to_AirLoopHVACUnitarySystem.get.supplyFan.get
-        if fan.to_FanConstantVolume.is_initialized || comp.to_FanOnOff.is_initialized
+        if fan.to_FanConstantVolume.is_initialized || fan.to_FanOnOff.is_initialized
           fan_pwr_limit_type = 'constant volume'
         elsif fan.to_FanVariableVolume.is_initialized
           fan_pwr_limit_type = 'variable volume'
@@ -482,13 +492,13 @@ class Standard
     # Calculate the Allowable Fan System brake horsepower per Table G3.1.2.9
     allowable_fan_bhp = 0
     if fan_pwr_limit_type == 'constant volume'
-      if dsn_air_flow_cfm > 0 
+      if dsn_air_flow_cfm > 0
         allowable_fan_bhp = dsn_air_flow_cfm * 0.00094 + fan_pwr_adjustment_bhp
       else
         allowable_fan_bhp = 0.00094
       end
     elsif fan_pwr_limit_type == 'variable volume'
-      if dsn_air_flow_cfm > 0 
+      if dsn_air_flow_cfm > 0
         allowable_fan_bhp = dsn_air_flow_cfm * 0.0013 + fan_pwr_adjustment_bhp
       else
         allowable_fan_bhp = 0.0013
@@ -508,9 +518,9 @@ class Standard
     cfm_per_ft2 = dsn_air_flow_cfm / floor_area_served_ft2
 
     if allowable_fan_bhp.zero?
-      cfm_per_hp = 0  
+      cfm_per_hp = 0
       OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirLoopHVAC', "AirLoopHVAC #{air_loop_hvac.name} has zero allowable fan bhp, probably due to zero design air flow cfm'.")
-    else  
+    else
       cfm_per_hp = dsn_air_flow_cfm / allowable_fan_bhp
     end
     OpenStudio.logFree(OpenStudio::Debug, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: area served = #{floor_area_served_ft2.round} ft^2.")
@@ -543,6 +553,7 @@ class Standard
       elsif comp.to_AirLoopHVACUnitarySystem.is_initialized
         sup_fan = comp.to_AirLoopHVACUnitarySystem.get.supplyFan
         next if sup_fan.empty?
+
         sup_fan = sup_fan.get
         if sup_fan.to_FanConstantVolume.is_initialized
           fans << sup_fan.to_FanConstantVolume.get
@@ -847,6 +858,7 @@ class Standard
 
     # skip systems without outdoor air
     return economizer_required unless air_loop_hvac.airLoopHVACOutdoorAirSystem.is_initialized
+
     # Determine if the system serves residential spaces
     is_res = false
     if air_loop_hvac_residential_area_served(air_loop_hvac) > 0
@@ -879,7 +891,7 @@ class Standard
     infinity_btu_per_hr = 999_999_999_999
     minimum_capacity_btu_per_hr = infinity_btu_per_hr if minimum_capacity_btu_per_hr.nil?
 
-    # Exception valid for 90.1-2004 (6.5.1.(e)) through 90.1-2013 (6.5.1.5)
+    # Exception valid for 90.1-2004 (6.5.1.(e)) through 90.1-2019 (6.5.1.4)
     if is_res
       minimum_capacity_btu_per_hr *= 5
     end
@@ -1006,8 +1018,8 @@ class Standard
       return [nil, nil, nil]
     when 'FixedDryBulb'
       search_criteria = {
-          'template' => template,
-          'climate_zone' => climate_zone
+        'template' => template,
+        'climate_zone' => climate_zone
       }
       econ_limits = model_find_object(standards_data['economizers'], search_criteria)
       drybulb_limit_f = econ_limits['fixed_dry_bulb_high_limit_shutoff_temp']
@@ -2206,13 +2218,12 @@ class Standard
   end
 
   # Enable supply air temperature (SAT) reset based
-  # on outdoor air conditions.  SAT will be kept at the
+  # on outdoor air conditions. SAT will be kept at the
   # current design temperature when outdoor air is above 70F,
   # increased by 5F when outdoor air is below 50F, and reset
   # linearly when outdoor air is between 50F and 70F.
   #
   # @return [Bool] Returns true if successful, false if not.
-
   def air_loop_hvac_enable_supply_air_temperature_reset_outdoor_temperature(air_loop_hvac)
     # for AHU1 in Outpatient, SAT is 52F constant, no reset
     return true if air_loop_hvac.name.get == 'PVAV Outpatient F1'
@@ -2224,7 +2235,7 @@ class Standard
     sat_at_hi_oat_f = OpenStudio.convert(sat_at_hi_oat_c, 'C', 'F').get
     # 5F increase when it's cold outside,
     # and therefore less cooling capacity is likely required.
-    increase_f = 5.0
+    increase_f = air_loop_hvac_enable_supply_air_temperature_reset_delta(air_loop_hvac)
     sat_at_lo_oat_f = sat_at_hi_oat_f + increase_f
     sat_at_lo_oat_c = OpenStudio.convert(sat_at_lo_oat_f, 'F', 'C').get
 
@@ -2245,7 +2256,7 @@ class Standard
 
     # Attach the setpoint manager to the
     # supply outlet node of the system.
-    sat_oa_reset.addToNode(supplyOutletNode)
+    sat_oa_reset.addToNode(air_loop_hvac.supplyOutletNode)
 
     OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: Supply air temperature reset was enabled.  When OAT is greater than #{hi_oat_f.round}F, SAT is #{sat_at_hi_oat_f.round}F.  When OAT is less than #{lo_oat_f.round}F, SAT is #{sat_at_lo_oat_f.round}F.  It varies linearly in between these points.")
 
@@ -3061,8 +3072,12 @@ class Standard
 
     # Set HVAC availability schedule to follow occupancy
     air_loop_hvac.setAvailabilitySchedule(loop_occ_sch)
-    air_loop_hvac.supplyComponents('OS:AirLoopHVAC:UnitaryHeatPump:AirToAir:MultiSpeed'.to_IddObjectType).each do |comp|
-      comp.to_AirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed.get.setAvailabilitySchedule(loop_occ_sch)
+    air_loop_hvac.supplyComponents.each do |comp|
+      if comp.to_AirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed.is_initialized
+        comp.to_AirLoopHVACUnitaryHeatPumpAirToAirMultiSpeed.get.setSupplyAirFanOperatingModeSchedule(loop_occ_sch)
+      elsif comp.to_AirLoopHVACUnitarySystem.is_initialized
+        comp.to_AirLoopHVACUnitarySystem.get.setSupplyAirFanOperatingModeSchedule(loop_occ_sch)
+      end
     end
 
     return true
@@ -3094,6 +3109,7 @@ class Standard
     air_loop_hvac.thermalZones.each do |zone|
       # Skip zones that have exterior surface area
       next if zone.exteriorSurfaceArea > 0
+
       total_area += zone.floorArea
     end
 
@@ -3111,6 +3127,7 @@ class Standard
     air_loop_hvac.thermalZones.each do |zone|
       # Skip zones that have no exterior surface area
       next if zone.exteriorSurfaceArea.zero?
+
       total_area += zone.floorArea
     end
 

data/lib/openstudio-standards/standards/Standards.AirTerminalSingleDuctVAVReheat.rb

@@ -1,4 +1,3 @@
-
 class Standard
   # @!group AirTerminalSingleDuctVAVReheat
 

data/lib/openstudio-standards/standards/Standards.BoilerHotWater.rb

@@ -1,4 +1,3 @@
-
 class Standard
   # @!group BoilerHotWater
 

data/lib/openstudio-standards/standards/Standards.BuildingStory.rb

@@ -16,6 +16,7 @@ class Standard
     building_story.spaces.each do |space|
       # Ignore spaces that aren't part of the total floor area
       next unless space.partofTotalFloorArea
+
       multipliers << space.multiplier
     end
 

data/lib/openstudio-standards/standards/Standards.ChillerElectricEIR.rb

@@ -1,4 +1,3 @@
-
 class Standard
   # @!group ChillerElectricEIR
 
@@ -75,9 +74,8 @@ class Standard
     # Get the chiller properties
     search_criteria = chiller_electric_eir_find_search_criteria(chiller_electric_eir)
     capacity_w = chiller_electric_eir_find_capacity(chiller_electric_eir)
-    unless capacity_w
-      return nil
-    end
+    return nil unless capacity_w
+
     capacity_tons = OpenStudio.convert(capacity_w, 'W', 'ton').get
     chlr_props = model_find_object(standards_data['chillers'], search_criteria, capacity_tons, Date.today)
 

data/lib/openstudio-standards/standards/Standards.CoilCoolingDXMultiSpeed.rb

@@ -33,7 +33,8 @@ class Standard
           elsif htg_coil.to_CoilHeatingGasMultiStage.is_initialized
             heating_type = 'All Other'
           end
-        end # TODO: Add other unitary systems
+          # TODO: Add other unitary systems
+        end
       elsif coil_cooling_dx_multi_speed.containingZoneHVACComponent.is_initialized
         containing_comp = coil_cooling_dx_multi_speed.containingZoneHVACComponent.get
         if containing_comp.to_ZoneHVACPackagedTerminalAirConditioner.is_initialized
@@ -44,7 +45,8 @@ class Standard
           elsif htg_coil.to_CoilHeatingWater.is_initialized || htg_coil.to_CoilHeatingGas.is_initialized || htg_col.to_CoilHeatingGasMultiStage
             heating_type = 'All Other'
           end
-        end # TODO: Add other zone hvac systems
+          # TODO: Add other zone hvac systems
+        end
       end
     end
 
@@ -217,18 +219,17 @@ class Standard
   #
   # @return [Double] capacity in W to be used for find object
   def coil_cooling_dx_multi_speed_find_capacity(coil_cooling_dx_multi_speed)
-
     capacity_w = nil
     clg_stages = coil_cooling_dx_multi_speed.stages
     if clg_stages.last.grossRatedTotalCoolingCapacity.is_initialized
       capacity_w = clg_stages.last.grossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 1) && (coil_cooling_dx_multi_speed.autosizedSpeed1GrossRatedTotalCoolingCapacity.is_initialized)
+    elsif (clg_stages.size == 1) && coil_cooling_dx_multi_speed.autosizedSpeed1GrossRatedTotalCoolingCapacity.is_initialized
       capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed1GrossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 2) && (coil_cooling_dx_multi_speed.autosizedSpeed2GrossRatedTotalCoolingCapacity.is_initialized)
+    elsif (clg_stages.size == 2) && coil_cooling_dx_multi_speed.autosizedSpeed2GrossRatedTotalCoolingCapacity.is_initialized
       capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed2GrossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 3) && (coil_cooling_dx_multi_speed.autosizedSpeed3GrossRatedTotalCoolingCapacity.is_initialized)
+    elsif (clg_stages.size == 3) && coil_cooling_dx_multi_speed.autosizedSpeed3GrossRatedTotalCoolingCapacity.is_initialized
       capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed3GrossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 4) && (coil_cooling_dx_multi_speed.autosizedSpeed4GrossRatedTotalCoolingCapacity.is_initialized)
+    elsif (clg_stages.size == 4) && coil_cooling_dx_multi_speed.autosizedSpeed4GrossRatedTotalCoolingCapacity.is_initialized
       capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed4GrossRatedTotalCoolingCapacity.get
     else
       OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{coil_cooling_dx_multi_speed.name} capacity is not available, cannot apply efficiency standard.")
@@ -244,7 +245,6 @@ class Standard
   # @param rename [Bool] if true, object will be renamed to include capacity and efficiency level
   # @return [Double] full load efficiency (COP)
   def coil_cooling_dx_multi_speed_standard_minimum_cop(coil_cooling_dx_multi_speed)
-
     search_criteria = coil_dx_find_search_criteria(coil_cooling_dx_multi_speed)
     cooling_type = search_criteria['cooling_type']
     heating_type = search_criteria['heating_type']
@@ -300,7 +300,5 @@ class Standard
     end
 
     return cop, new_comp_name
-
   end
-
 end

data/lib/openstudio-standards/standards/Standards.CoilCoolingDXSingleSpeed.rb

@@ -1,4 +1,3 @@
-
 class Standard
   # @!group CoilCoolingDXSingleSpeed
 
@@ -109,18 +108,18 @@ class Standard
     # If CRAC, use equations if coefficients are specified
     crac_minimum_scop = ac_props['minimum_scop']
     if sub_category == 'CRAC' && !crac_minimum_scop.nil?
-      # TABLE 6.8.1K in 90.1-2010, TABLE 6.8.1-11 in 90.1-2013
+      # TABLE 6.8.1K in 90.1-2010, TABLE 6.8.1-10 in 90.1-2019
       # cop = scop/sensible heat ratio
       if coil_cooling_dx_single_speed.ratedSensibleHeatRatio.is_initialized
         crac_sensible_heat_ratio = coil_cooling_dx_single_speed.ratedSensibleHeatRatio.get
       elsif coil_cooling_dx_single_speed.autosizedRatedSensibleHeatRatio.is_initialized
-        #Though actual inlet temperature is very high (thus basically no dehumidification),
-        #sensible heat ratio can't be pre-assigned as 1 because it should be the value at conditions defined in ASHRAE Standard 127 => 26.7 °C drybulb/19.4 °C wetbulb.
+        # Though actual inlet temperature is very high (thus basically no dehumidification),
+        # sensible heat ratio can't be pre-assigned as 1 because it should be the value at conditions defined in ASHRAE Standard 127 => 26.7 degC drybulb/19.4 degC wetbulb.
         crac_sensible_heat_ratio = coil_cooling_dx_single_speed.autosizedRatedSensibleHeatRatio.get
       else
         OpenStudio.logFree(OpenStudio::Error, 'openstudio.standards.CoilCoolingDXSingleSpeed', 'Failed to get autosized sensible heat ratio')
       end
-      cop = crac_minimum_scop/crac_sensible_heat_ratio
+      cop = crac_minimum_scop / crac_sensible_heat_ratio
       cop = cop.round(2)
       new_comp_name = "#{coil_cooling_dx_single_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{crac_minimum_scop}SCOP #{cop}COP"
       OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXSingleSpeed', "For #{coil_cooling_dx_single_speed.name}: #{cooling_type} #{heating_type} #{sub_category} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SCOP = #{crac_minimum_scop}")

data/lib/openstudio-standards/standards/Standards.CoilCoolingDXTwoSpeed.rb

@@ -1,4 +1,3 @@
-
 class Standard
   # @!group CoilCoolingDXTwoSpeed
 

data/lib/openstudio-standards/standards/Standards.CoilCoolingWaterToAirHeatPumpEquationFit.rb

@@ -106,4 +106,4 @@ class Standard
 
     return sql_db_vars_map
   end
-end
+end

data/lib/openstudio-standards/standards/Standards.CoilDX.rb

@@ -1,4 +1,3 @@
-
 # A variety of DX coil methods that are the same regardless of coil type.
 # These methods are available to:
 # CoilCoolingDXSingleSpeed, CoilCoolingDXTwoSpeed, CoilCoolingDXMultiSpeed
@@ -35,7 +34,8 @@ module CoilDX
         # PTHP
         elsif containing_comp.to_ZoneHVACPackagedTerminalHeatPump.is_initialized
           sub_category = 'PTHP'
-        end # TODO: Add other zone hvac systems
+        end
+        # TODO: Add other zone hvac systems
       end
     end
 
@@ -61,11 +61,12 @@ module CoilDX
         # PTHP
         if containing_comp.to_ZoneHVACPackagedTerminalHeatPump.is_initialized
           heat_pump = true
-        end # TODO: Add other zone hvac systems
+        end
+        # TODO: Add other zone hvac systems
       end
     else
-      if (!coil_dx.airLoopHVAC.get.supplyComponents('OS:Coil:Heating:DX:SingleSpeed'.to_IddObjectType).empty?) ||
-          (!coil_dx.airLoopHVAC.get.supplyComponents('OS:Coil:Heating:DX:VariableSpeed'.to_IddObjectType).empty?)
+      if !coil_dx.airLoopHVAC.get.supplyComponents('OS:Coil:Heating:DX:SingleSpeed'.to_IddObjectType).empty? ||
+         !coil_dx.airLoopHVAC.get.supplyComponents('OS:Coil:Heating:DX:VariableSpeed'.to_IddObjectType).empty?
         heat_pump = true
       end
     end
@@ -97,7 +98,8 @@ module CoilDX
           elsif htg_coil.to_CoilHeatingGasMultiStage.is_initialized
             htg_type = 'All Other'
           end
-        end # TODO: Add other unitary systems
+        end
+        # TODO: Add other unitary systems
       elsif coil_dx.containingZoneHVACComponent.is_initialized
         containing_comp = coil_dx.containingZoneHVACComponent.get
         # PTAC
@@ -111,8 +113,8 @@ module CoilDX
         # PTHP
         elsif containing_comp.to_ZoneHVACPackagedTerminalHeatPump.is_initialized
           htg_type = 'Electric Resistance or None'
-        end # TODO: Add other zone hvac systems
-
+        end
+        # TODO: Add other zone hvac systems
       end
     end
 
@@ -181,7 +183,8 @@ module CoilDX
             containing_comp = coil_dx.containingHVACComponent.get
             if containing_comp.to_AirLoopHVACUnitaryHeatPumpAirToAir.is_initialized
               search_criteria['heating_type'] = nil
-            end # TODO: Add other unitary systems
+            end
+            # TODO: Add other unitary systems
           end
         end
       end