openstudio-standards 0.2.12.rc5 → 0.2.13

data/lib/openstudio-standards.rb

@@ -72,6 +72,8 @@ module OpenstudioStandards
   require_relative "#{stds}/necb/ECMS/ecms.rb"
   require_relative "#{stds}/necb/ECMS/erv.rb"
   require_relative "#{stds}/necb/ECMS/hvac_systems.rb"
+  require_relative "#{stds}/necb/ECMS/nv.rb"
+  require_relative "#{stds}/necb/ECMS/pv_ground.rb"
 
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1"
   require_relative "#{stds}/ashrae_90_1/doe_ref_pre_1980/doe_ref_pre_1980"
@@ -86,6 +88,8 @@ module OpenstudioStandards
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2010/comstock_ashrae_90_1_2010/comstock_ashrae_90_1_2010"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/comstock_ashrae_90_1_2013/comstock_ashrae_90_1_2013"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019"
   require_relative "#{stds}/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017"
   require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily"
 
@@ -154,6 +158,8 @@ module OpenstudioStandards
   require_relative "#{stds}/Standards.CoolingTower"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.CoolingTower"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.CoolingTower"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.CoolingTower"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.CoolingTower"
   require_relative "#{stds}/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.CoolingTower"
   require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.CoolingTower"
 
@@ -242,6 +248,26 @@ module OpenstudioStandards
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.Space"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.ThermalZone"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.WaterHeaterMixed"
+  # 90.1-2016
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.AirLoopHVAC"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.CoolingTower"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.CoolingTowerSingleSpeed"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.CoolingTowerTwoSpeed"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.CoolingTowerVariableSpeed"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.FanVariableVolume"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.Space"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.ThermalZone"
+  # 90.1-2019
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.AirLoopHVAC"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.CoolingTower"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.CoolingTowerSingleSpeed"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.CoolingTowerTwoSpeed"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.CoolingTowerVariableSpeed"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.FanVariableVolume"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.Space"
+  require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.ThermalZone"
   # DOE 1980-2004
   require_relative "#{stds}/ashrae_90_1/doe_ref_1980_2004/doe_ref_1980_2004.AirLoopHVAC"
   require_relative "#{stds}/ashrae_90_1/doe_ref_1980_2004/doe_ref_1980_2004.Model"
@@ -323,6 +349,7 @@ module OpenstudioStandards
   require_relative "#{proto}/common/buildings/Prototype.College"
   require_relative "#{proto}/common/buildings/Prototype.TallBuilding"
   require_relative "#{proto}/common/buildings/Prototype.SuperTallBuilding"
+  require_relative "#{proto}/common/buildings/Prototype.Courthouse"
 
   # NECB Building Types
   require_relative "#{proto}/common/prototype_metaprogramming.rb"
@@ -358,17 +385,21 @@ module OpenstudioStandards
   require_relative "#{proto}/common/objects/Prototype.Model.hvac"
   require_relative "#{proto}/common/objects/Prototype.Model"
   require_relative "#{proto}/common/objects/Prototype.Model.swh"
+  require_relative "#{proto}/common/objects/Prototype.Pump"
+  require_relative "#{proto}/common/objects/Prototype.PumpVariableSpeed"
   require_relative "#{proto}/common/objects/Prototype.refrigeration"
   require_relative "#{proto}/common/objects/Prototype.ServiceWaterHeating"
   require_relative "#{proto}/common/objects/Prototype.SizingSystem"
   require_relative "#{proto}/common/objects/Prototype.utilities"
   # 90.1-2004
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2004/ashrae_90_1_2004.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2004/ashrae_90_1_2004.PumpVariableSpeed"
   # 90.1-2007
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2007/ashrae_90_1_2007.FanConstantVolume"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2007/ashrae_90_1_2007.FanOnOff"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2007/ashrae_90_1_2007.FanVariableVolume"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2007/ashrae_90_1_2007.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2007/ashrae_90_1_2007.PumpVariableSpeed"
   # 90.1-2010
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.FanConstantVolume"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.FanOnOff"
@@ -376,6 +407,7 @@ module OpenstudioStandards
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.Model"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.Model.elevators"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.PumpVariableSpeed"
   # 90.1-2013
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.FanConstantVolume"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.FanOnOff"
@@ -384,6 +416,25 @@ module OpenstudioStandards
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.Model.elevators"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.hvac_systems"
   require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.PumpVariableSpeed"
+  # 90.1-2016
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.FanConstantVolume"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.FanOnOff"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.FanVariableVolume"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.Model"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.Model.elevators"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.hvac_systems"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.PumpVariableSpeed"
+  # 90.1-2019
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.FanConstantVolume"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.FanOnOff"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.FanVariableVolume"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.Model"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.Model.elevators"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.hvac_systems"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{proto}/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.PumpVariableSpeed"
   # DOE Ref 1980-2004
   require_relative "#{proto}/ashrae_90_1/doe_ref_1980_2004/doe_ref_1980_2004.AirTerminalSingleDuctVAVReheat"
   require_relative "#{proto}/ashrae_90_1/doe_ref_1980_2004/doe_ref_1980_2004.Model.elevators"
@@ -422,7 +473,7 @@ module OpenstudioStandards
   require_relative "#{proto}/cbes/cbes_t24_2008/cbes_t24_2008.FanVariableVolume"
 
   # DLM: not sure where this code should go
-  def self.get_run_env()
+  def self.get_run_env
     # blank out bundler and gem path modifications, will be re-setup by new call
     new_env = {}
     new_env['BUNDLER_ORIG_MANPATH'] = nil
@@ -438,26 +489,26 @@ module OpenstudioStandards
     new_env['GEM_HOME'] = nil
 
     # DLM: for now, ignore current bundle in case it has binary dependencies in it
-    #bundle_gemfile = ENV['BUNDLE_GEMFILE']
-    #bundle_path = ENV['BUNDLE_PATH']
-    #if bundle_gemfile.nil? || bundle_path.nil?
-      new_env['BUNDLE_GEMFILE'] = nil
-      new_env['BUNDLE_PATH'] = nil
-      new_env['BUNDLE_WITHOUT'] = nil
-    #else
-    #  new_env['BUNDLE_GEMFILE'] = bundle_gemfile
-    #  new_env['BUNDLE_PATH'] = bundle_path
-    #end
+    # bundle_gemfile = ENV['BUNDLE_GEMFILE']
+    # bundle_path = ENV['BUNDLE_PATH']
+    # if bundle_gemfile.nil? || bundle_path.nil?
+    new_env['BUNDLE_GEMFILE'] = nil
+    new_env['BUNDLE_PATH'] = nil
+    new_env['BUNDLE_WITHOUT'] = nil
+    # else
+    #   new_env['BUNDLE_GEMFILE'] = bundle_gemfile
+    #   new_env['BUNDLE_PATH'] = bundle_path
+    # end
 
     return new_env
   end
 
   def self.run_command(command)
-    stdout_str, stderr_str, status = Open3.capture3(get_run_env(), command)
+    stdout_str, stderr_str, status = Open3.capture3(get_run_env, command)
     if status.success?
       OpenStudio.logFree(OpenStudio::Debug, 'openstudio.standards.command', "Successfully ran command: '#{command}'")
-      #puts "stdout: #{stdout_str}"
-      #puts "stderr: #{stderr_str}"
+      # puts "stdout: #{stdout_str}"
+      # puts "stderr: #{stderr_str}"
       return true
     else
       OpenStudio.logFree(OpenStudio::Error, 'openstudio.standards.command', "Error running command: '#{command}'")
@@ -466,9 +517,10 @@ module OpenstudioStandards
 
       # Print the ENV for debugging
       final_env = []
-      env_changes = get_run_env()
+      env_changes = get_run_env
       ENV.each do |env_var, val|
         next if env_changes.key?(env_var) && env_changes[env_var].nil?
+
         final_env << "#{env_var} = #{val}"
       end
       OpenStudio.logFree(OpenStudio::Error, 'openstudio.standards.command', "command's modified ENV: \n #{final_env.join("\n")}")
@@ -476,11 +528,10 @@ module OpenstudioStandards
       # List the gems available to openstudio at this point
       cli_path = OpenStudio.getOpenStudioCLI
       cmd = "\"#{cli_path}\" gem_list"
-      stdout_str_2, stderr_str_2, status_2 = Open3.capture3(get_run_env(), cmd)
+      stdout_str_2, stderr_str_2, status_2 = Open3.capture3(get_run_env, cmd)
       OpenStudio.logFree(OpenStudio::Error, 'openstudio.standards.command', "Gems available to openstudio cli according to (openstudio gem_list): \n #{stdout_str_2}")
 
       return false
     end
   end
-
 end

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2004/ashrae_90_1_2004.PumpVariableSpeed.rb

@@ -0,0 +1,28 @@
+class ASHRAE9012004 < ASHRAE901
+  # @!group Pump
+
+  # Determine type of pump part load control type
+  #
+  # @code_sections [90.1-2004_6.5.4.1]
+  # @param pump [OpenStudio::Model::PumpVariableSpeed] OpenStudio pump object
+  # @param plant_loop_type [String] Type of plant loop
+  # @param pump_nominal_hp [Float] Pump nominal horsepower
+  # @return [String] Pump part load control type
+  def pump_variable_speed_get_control_type(pump, plant_loop_type, pump_nominal_hp)
+    threshold = 50 # hp
+
+    # Sizing factor to take into account that pumps
+    # are typically sized to handle a ~10% pressure
+    # increase and ~10% flow increase.
+    design_sizing_factor = 1.25
+
+    # Get pump head in Pa
+    pump_head_pa = pump.ratedPumpHead
+
+    if pump_nominal_hp * design_sizing_factor > threshold && pump_head_pa > 300_000 # 100 ft. of head
+      return 'VSD No Reset'
+    else
+      return 'Riding Curve'
+    end
+  end
+  end

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2007/ashrae_90_1_2007.FanVariableVolume.rb

@@ -27,7 +27,6 @@ class ASHRAE9012007 < ASHRAE901
                              5.58
                            end
 
-
     return pressure_rise_in_h2o
   end
 end

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2007/ashrae_90_1_2007.PumpVariableSpeed.rb

@@ -0,0 +1,28 @@
+class ASHRAE9012007 < ASHRAE901
+  # @!group Pump
+
+  # Determine type of pump part load control type
+  #
+  # @code_sections [90.1-2007_6.5.4.1]
+  # @param pump [OpenStudio::Model::PumpVariableSpeed] OpenStudio pump object
+  # @param plant_loop_type [String] Type of plant loop
+  # @param pump_nominal_hp [Float] Pump nominal horsepower
+  # @return [String] Pump part load control type
+  def pump_variable_speed_get_control_type(pump, plant_loop_type, pump_nominal_hp)
+    threshold = 50 # hp
+
+    # Sizing factor to take into account that pumps
+    # are typically sized to handle a ~10% pressure
+    # increase and ~10% flow increase.
+    design_sizing_factor = 1.25
+
+    # Get pump head in Pa
+    pump_head_pa = pump.ratedPumpHead
+
+    if pump_nominal_hp * design_sizing_factor > threshold && pump_head_pa > 300_000 # 100 ft. of head
+      return 'VSD No Reset'
+    else
+      return 'Riding Curve'
+    end
+  end
+  end

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.Model.rb

@@ -16,10 +16,12 @@ class ASHRAE9012010 < ASHRAE901
   # 'DifferentialDryBulbAndEnthalpy'
   def model_economizer_type(model, climate_zone)
     economizer_type = case climate_zone
-                      when 'ASHRAE 169-2006-1A',
+                      when 'ASHRAE 169-2006-0A',
+                          'ASHRAE 169-2006-1A',
                           'ASHRAE 169-2006-2A',
                           'ASHRAE 169-2006-3A',
                           'ASHRAE 169-2006-4A',
+                          'ASHRAE 169-2013-0A',
                           'ASHRAE 169-2013-1A',
                           'ASHRAE 169-2013-2A',
                           'ASHRAE 169-2013-3A',
@@ -30,4 +32,53 @@ class ASHRAE9012010 < ASHRAE901
                       end
     return economizer_type
   end
-end
+
+  # Adjust model to comply with fenestration orientation requirements
+  #
+  # @code_sections [90.1-2010_5.5.4.5]
+  # @param [OpenStudio::Model::Model] OpenStudio model object
+  # @return [Boolean] Returns true if successful, false otherwise
+  def model_fenestration_orientation(model, climate_zone)
+    wwr = false
+
+    win_area_w = model_get_window_area_info_for_orientation(model, 'W', wwr: wwr)
+    win_area_e = model_get_window_area_info_for_orientation(model, 'E', wwr: wwr)
+    win_area_s = model_get_window_area_info_for_orientation(model, 'S', wwr: wwr)
+
+    # Make prototype specific adjustment to meet the code requirement
+    if !((win_area_s > win_area_w) && (win_area_s > win_area_e))
+      if model.getBuilding.standardsBuildingType.is_initialized
+        building_type = model.getBuilding.standardsBuildingType.get
+
+        case building_type
+          # TODO: Implementatation for other building types not meeting the requirement
+          # The offices, schools, warehouse (exempted), large hotel, outpatient,
+          # retails, apartments should meet the requirement according to Section
+          # 5.2.1.7 in Thornton et al. 2011
+          when 'Hospital'
+            # Rotate the building counter-clockwise
+            model_set_building_north_axis(model, 270.0)
+          when 'SmallHotel'
+            # Rotate the building clockwise
+            model_set_building_north_axis(model, 180.0)
+          else
+            OpenStudio.logFree(OpenStudio::Warn, 'openstudio.model.ashrae_90_1_2010', "The prototype model doesn't meet the requirement from Section 5.5.4.5 in ASHRAE Standard 90.1-2010.")
+        end
+      else
+        OpenStudio.logFree(OpenStudio::Warn, 'openstudio.model.ashrae_90_1_2010', "The prototype model doesn't meet the requirement from Section 5.5.4.5 in ASHRAE Standard 90.1-2010, its standards building type shall be specified.")
+      end
+    end
+
+    return true
+  end
+
+  # Is transfer air required?
+  #
+  # @code_sections [90.1-2010_6.5.7.1.2]
+  # @param model [OpenStudio::Model::Model] OpenStudio model object
+  # @return [Boolean] true if transfer air is required, false otherwise
+  def model_transfer_air_required?(model)
+    # TODO: It actually is for kitchen but not implemented yet
+    return false
+  end
+end

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.PumpVariableSpeed.rb

@@ -0,0 +1,29 @@
+class ASHRAE9012010 < ASHRAE901
+  # @!group Pump
+
+  # Determine type of pump part load control type
+  #
+  # @code_sections [90.1-2010_6.5.4.1]
+  # @param pump [OpenStudio::Model::PumpVariableSpeed] OpenStudio pump object
+  # @param plant_loop_type [String] Type of plant loop
+  # @param pump_nominal_hp [Float] Pump nominal horsepower
+  # @return [String] Pump part load control type
+  def pump_variable_speed_get_control_type(pump, plant_loop_type, pump_nominal_hp)
+    threshold = 5 # hp
+
+    # Sizing factor to take into account that pumps
+    # are typically sized to handle a ~10% pressure
+    # increase and ~10% flow increase.
+    design_sizing_factor = 1.25
+
+    if plant_loop_type == 'Heating'
+      return 'Riding Curve'
+    else
+      if pump_nominal_hp * design_sizing_factor > threshold
+        return 'VSD DP Reset' # Requirement only applies to CHW pumps
+      else
+        return 'Riding Curve'
+      end
+    end
+  end
+  end

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.Model.rb

@@ -16,10 +16,12 @@ class ASHRAE9012013 < ASHRAE901
   # 'DifferentialDryBulbAndEnthalpy'
   def model_economizer_type(model, climate_zone)
     economizer_type = case climate_zone
-                      when 'ASHRAE 169-2006-1A',
+                      when 'ASHRAE 169-2006-0A',
+                          'ASHRAE 169-2006-1A',
                           'ASHRAE 169-2006-2A',
                           'ASHRAE 169-2006-3A',
                           'ASHRAE 169-2006-4A',
+                          'ASHRAE 169-2013-0A',
                           'ASHRAE 169-2013-1A',
                           'ASHRAE 169-2013-2A',
                           'ASHRAE 169-2013-3A',
@@ -30,4 +32,157 @@ class ASHRAE9012013 < ASHRAE901
                       end
     return economizer_type
   end
-end
+
+  # Adjust model to comply with fenestration orientation requirements
+  #
+  # @code_sections [90.1-2013_5.5.4.5]
+  # @param [OpenStudio::Model::Model] OpenStudio model object
+  # @return [Boolean] Returns true if successful, false otherwise
+  def model_fenestration_orientation(model, climate_zone)
+    # Building rotation to meet the same code requirement for
+    # 90.1-2010 are kept
+    if model.getBuilding.standardsBuildingType.is_initialized
+      building_type = model.getBuilding.standardsBuildingType.get
+
+      case building_type
+        when 'Hospital'
+          # Rotate the building counter-clockwise
+          model_set_building_north_axis(model, 270.0)
+        when 'SmallHotel'
+          # Rotate the building clockwise
+          model_set_building_north_axis(model, 180)
+      end
+    end
+
+    wwr = false
+    # Section 6.2.1.2 in the ANSI/ASHRAE/IES Standard 90.1-2013 Determination
+    # of Energy Savings: Quantitative Analysis mentions that the SHGC trade-off
+    # path is most likely to be used by designers for compliance.
+    #
+    # The following adjustment are only made for models with simple glazing objects
+    non_simple_glazing = false
+    shgc_a = 0
+    model.getSpaces.each do |space|
+      # Get thermal zone multiplier
+      multiplier = space.thermalZone.get.multiplier
+
+      space.surfaces.each do |surface|
+        surface.subSurfaces.each do |subsurface|
+          # Get window subsurface type
+          subsurface_type = subsurface.subSurfaceType.to_s.downcase
+
+          # Window, glass doors
+          next unless (subsurface_type.include? 'window') || (subsurface_type.include? 'glass')
+
+          # Check if non simple glazing fenestration objects are used
+          subsurface_cons = subsurface.construction.get.to_Construction.get
+          non_simple_glazing = true unless subsurface_cons.layers[0].to_SimpleGlazing.is_initialized
+
+          if non_simple_glazing
+            OpenStudio.logFree(OpenStudio::Warn, 'openstudio.ashrae_90_1_2013.model', 'Fenestration objects in the model use non-simple glazing models, fenestration requirements are not applied')
+            return false
+          end
+
+          # Get subsurface's simple glazing object
+          subsurface_shgc = subsurface_cons.layers[0].to_SimpleGlazing.get.solarHeatGainCoefficient
+
+          # Get subsurface area
+          subsurface_area = subsurface.grossArea * subsurface.multiplier * multiplier
+
+          # SHGC * Area
+          shgc_a += subsurface_shgc * subsurface_area
+        end
+      end
+    end
+
+    # Calculate West, East and total fenestration area
+    a_w = model_get_window_area_info_for_orientation(model, 'W', wwr: wwr)
+    a_e = model_get_window_area_info_for_orientation(model, 'E', wwr: wwr)
+    a_t = a_w + a_e + model_get_window_area_info_for_orientation(model, 'N', wwr: wwr) + model_get_window_area_info_for_orientation(model, 'S', wwr: wwr)
+
+    return true if a_t == 0.0
+
+    # For prototypes SHGC_c assumed to be the building's weighted average SHGC
+    shgc_c = shgc_a / a_t
+    shgc_c = shgc_c.round(2)
+
+    # West and East facing WWR
+    wwr_w = model_get_window_area_info_for_orientation(model, 'W', wwr: true)
+    wwr_e = model_get_window_area_info_for_orientation(model, 'E', wwr: true)
+
+    # Calculate new SHGC for west and east facing fenestration;
+    # Create new simple glazing object and assign it to all
+    # West and East fenestration
+    #
+    # Exception 5 is applied when applicable
+    shgc_w = 0
+    shgc_e = 0
+    if !((a_w <= a_t / 4) && (a_e <= a_t / 4))
+      # Calculate new SHGC
+      if wwr_w > 0.2
+        shgc_w = a_t * shgc_c / (4 * a_w)
+      end
+      if wwr_e > 0.2
+        shgc_e = a_t * shgc_c / (4 * a_w)
+      end
+
+      # No SHGC adjustment needed
+      return true if shgc_w == 0 && shgc_e == 0
+
+      model.getSpaces.each do |space|
+        # Get thermal zone multiplier
+        multiplier = space.thermalZone.get.multiplier
+
+        space.surfaces.each do |surface|
+          # Proceed only for East and West facing surfaces that are required
+          # to have their SHGC adjusted
+          next unless (surface_cardinal_direction(surface) == 'W' && shgc_w > 0) ||
+                      (surface_cardinal_direction(surface) == 'E' && shgc_e > 0)
+
+          surface.subSurfaces.each do |subsurface|
+            # Get window subsurface type
+            subsurface_type = subsurface.subSurfaceType.to_s.downcase
+
+            # Window, glass doors
+            next unless (subsurface_type.include? 'window') || (subsurface_type.include? 'glass')
+
+            new_shgc = surface_cardinal_direction(surface) == 'W' ? shgc_w : shgc_e
+            new_shgc = new_shgc.round(2)
+
+            # Get construction/simple glazing associated with the subsurface
+            subsurface_org_cons = subsurface.construction.get.to_Construction.get
+            subsurface_org_cons_mat = subsurface_org_cons.layers[0].to_SimpleGlazing.get
+
+            # Only proceed if new SHGC is different than orignal one
+            next unless (new_shgc - subsurface_org_cons_mat.solarHeatGainCoefficient).abs > 0
+
+            # Clone construction/simple glazing associated with the subsurface
+            subsurface_new_cons = subsurface_org_cons.clone(model).to_Construction.get
+            subsurface_new_cons.setName("#{subsurface.name} Wind Cons U-#{OpenStudio.convert(subsurface_org_cons_mat.uFactor, 'W/m^2*K', 'Btu/ft^2*h*R').get.round(2)} SHGC #{new_shgc}")
+            subsurface_new_cons_mat = subsurface_org_cons_mat.clone(model).to_SimpleGlazing.get
+            subsurface_new_cons_mat.setName("#{subsurface.name} Wind SG Mat U-#{OpenStudio.convert(subsurface_org_cons_mat.uFactor, 'W/m^2*K', 'Btu/ft^2*h*R').get.round(2)} SHGC #{new_shgc}")
+            subsurface_new_cons_mat.setSolarHeatGainCoefficient(new_shgc)
+            new_layers = OpenStudio::Model::MaterialVector.new
+            new_layers << subsurface_new_cons_mat
+            subsurface_new_cons.setLayers(new_layers)
+
+            # Assign new construction to sub surface
+            subsurface.setConstruction(subsurface_new_cons)
+          end
+        end
+      end
+    end
+
+    return true
+  end
+
+  # Is transfer air required?
+  #
+  # @code_sections [90.1-2013_6.5.7.1.2]
+  # @param model [OpenStudio::Model::Model] OpenStudio model object
+  # @return [Boolean] true if transfer air is required, false otherwise
+  def model_transfer_air_required?(model)
+    # TODO: It actually is for kitchen but not implemented yet
+    return false
+  end
+end