openstudio-standards 0.2.12.rc5 → 0.2.13

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.LargeOfficeDetailed.rb

@@ -42,6 +42,7 @@ module LargeOfficeDetailed
     # replace EvaporativeFluidCoolerSingleSpeed with CoolingTowerTwoSpeed
     model.getPlantLoops.each do |plant_loop|
       next unless plant_loop.name.to_s.include? 'Heat Pump Loop'
+
       sup_wtr_high_temp_f = 65.0
       sup_wtr_low_temp_f = 41.0
       sup_wtr_high_temp_c = OpenStudio.convert(sup_wtr_high_temp_f, 'F', 'C').get
@@ -89,7 +90,7 @@ module LargeOfficeDetailed
 
   def update_waterheater_loss_coefficient(model)
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', 'NECB2011'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019', 'NECB2011'
         model.getWaterHeaterMixeds.sort.each do |water_heater|
           water_heater.setOffCycleLossCoefficienttoAmbientTemperature(11.25413987)
           water_heater.setOnCycleLossCoefficienttoAmbientTemperature(11.25413987)
@@ -103,11 +104,14 @@ module LargeOfficeDetailed
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
+
     return true
   end
 
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = template == '90.1-2010' || template == '90.1-2013' ? 0.2 : 0.3
+    min_damper_position = template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019' ? 0.2 : 0.3
 
     # Set the minimum flow fraction
     air_terminal_single_duct_vav_reheat.setConstantMinimumAirFlowFraction(min_damper_position)

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.MediumOffice.rb

@@ -1,27 +1,37 @@
-
 # Custom changes for the MediumOffice prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
 module MediumOffice
   def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific adjustments')
+    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific HVAC adjustments')
 
     # add transformer
-    transformer_efficiency = nil
+    # efficiency based on a 45 kVA transformer
     case template
     when '90.1-2004', '90.1-2007'
       transformer_efficiency = 0.961
     when '90.1-2010', '90.1-2013'
       transformer_efficiency = 0.977
+    when '90.1-2016', '90.1-2019'
+      transformer_efficiency = 0.984
+    else
+      transformer_efficiency = nil
     end
     return true unless !transformer_efficiency.nil?
 
+    # Change to output variable name in E+ 9.4 (OS 3.1.0)
+    excluded_interiorequip_variable = if model.version < OpenStudio::VersionString.new('3.1.0')
+                                        'Electric Equipment Electric Energy'
+                                      else
+                                        'Electric Equipment Electricity Energy'
+                                      end
+
     model_add_transformer(model,
                           wired_lighting_frac: 0.0281,
                           transformer_size: 45000,
                           transformer_efficiency: transformer_efficiency,
                           excluded_interiorequip_key: '2 Elevator Lift Motors',
-                          excluded_interiorequip_meter: 'Electric Equipment Electric Energy')
+                          excluded_interiorequip_meter: excluded_interiorequip_variable)
 
     model.getSpaces.sort.each do |space|
       if space.name.get.to_s == 'Core_bottom'
@@ -46,6 +56,7 @@ module MediumOffice
     # @todo remove once infil_sch in Standards.Space pulls from default building infiltration schedule
     model.getSpaces.each do |space|
       next unless space.name.get.to_s.include? 'Plenum'
+
       # add infiltration if DOE Ref vintage
       if template == 'DOE Ref 1980-2004' || template == 'DOE Ref Pre-1980'
         # Create an infiltration rate object for this space
@@ -81,13 +92,17 @@ module MediumOffice
       if template == '90.1-2004'
         infiltration_per_zone_entrydoor = 1.04300287
         infiltration_entrydoor.setSchedule(model_add_schedule(model, 'OfficeMedium INFIL_Door_Opening_SCH'))
-      elsif template == '90.1-2007' || template == '90.1-2010' || template == '90.1-2013'
+      elsif template == '90.1-2007' || template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019'
         case climate_zone
-          when 'ASHRAE 169-2006-1A',
+          when 'ASHRAE 169-2006-0A',
+               'ASHRAE 169-2006-1A',
+               'ASHRAE 169-2006-0B',
                'ASHRAE 169-2006-1B',
                'ASHRAE 169-2006-2A',
                'ASHRAE 169-2006-2B',
+               'ASHRAE 169-2013-0A',
                'ASHRAE 169-2013-1A',
+               'ASHRAE 169-2013-0B',
                'ASHRAE 169-2013-1B',
                'ASHRAE 169-2013-2A',
                'ASHRAE 169-2013-2B'
@@ -107,141 +122,213 @@ module MediumOffice
     OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Adjusting daylight sensor positions and fractions')
 
     adjustments = [
-                    { '90.1-2010' => { 'Perimeter_bot_ZN_1' => { 'sensor_1_frac' => 0.08,
-                                                                 'sensor_2_frac' => 0.46,
-                                                                 'sensor_1_xyz' => [3.048, 1.524, 0.762],
-                                                                 'sensor_2_xyz' => [24.9555, 1.524, 0.762],
-																												},
-                                       'Perimeter_bot_ZN_2' => { 'sensor_1_frac' => 0.43,
-                                                                 'sensor_2_frac' => 0.12,
-                                                                 'sensor_1_xyz' => [48.387, 16.6369, 0.762],
-                                                                 'sensor_2_xyz' => [48.387, 3.048, 0.762],
-																												},
-                                       'Perimeter_bot_ZN_3' => { 'sensor_1_frac' => 0.46,
-                                                                 'sensor_2_frac' => 0.08,
-                                                                 'sensor_1_xyz' => [24.9514, 31.7498, 0.762],
-                                                                 'sensor_2_xyz' => [46.863, 31.7498, 0.762],
-																												},
-                                       'Perimeter_bot_ZN_4' => { 'sensor_1_frac' => 0.43,
-                                                                 'sensor_2_frac' => 0.12,
-                                                                 'sensor_1_xyz' => [1.524, 16.6369, 0.762],
-                                                                 'sensor_2_xyz' => [1.524, 30.2514, 0.762],
-																												},
-                                       'Perimeter_mid_ZN_1' => { 'sensor_1_frac' => 0.08,
-                                                                 'sensor_2_frac' => 0.46,
-                                                                 'sensor_1_xyz' => [3.048, 1.524, 4.7244],
-                                                                 'sensor_2_xyz' => [24.9555, 1.524, 4.7244],
-																												},
-                                       'Perimeter_mid_ZN_2' => { 'sensor_1_frac' => 0.43,
-                                                                 'sensor_2_frac' => 0.12,
-                                                                 'sensor_1_xyz' => [48.387, 16.6369, 4.7244],
-                                                                 'sensor_2_xyz' => [48.387, 3.048, 4.7244],
-																												},
-                                       'Perimeter_mid_ZN_3' => { 'sensor_1_frac' => 0.46,
-                                                                 'sensor_2_frac' => 0.08,
-                                                                 'sensor_1_xyz' => [24.9514, 31.7498, 4.7244],
-                                                                 'sensor_2_xyz' => [46.863, 31.7498, 4.7244],
-																												},
-                                       'Perimeter_mid_ZN_4' => { 'sensor_1_frac' => 0.43,
-                                                                 'sensor_2_frac' => 0.12,
-                                                                 'sensor_1_xyz' => [1.524, 16.6369, 4.7244],
-                                                                 'sensor_2_xyz' => [1.524, 30.2514, 4.7244],
-																												},
-                                       'Perimeter_top_ZN_1' => { 'sensor_1_frac' => 0.08,
-                                                                 'sensor_2_frac' => 0.46,
-                                                                 'sensor_1_xyz' => [3.048, 1.524, 8.687],
-                                                                 'sensor_2_xyz' => [24.9555, 1.524, 8.687],
-																												},
-                                       'Perimeter_top_ZN_2' => { 'sensor_1_frac' => 0.43,
-                                                                 'sensor_2_frac' => 0.12,
-                                                                 'sensor_1_xyz' => [48.387, 16.6369, 8.687],
-                                                                 'sensor_2_xyz' => [48.387, 3.048, 8.687],
-																												},
-                                       'Perimeter_top_ZN_3' => { 'sensor_1_frac' => 0.46,
-                                                                 'sensor_2_frac' => 0.08,
-                                                                 'sensor_1_xyz' => [24.9514, 31.7498, 8.687],
-                                                                 'sensor_2_xyz' => [46.863, 31.7498, 8.687],
-																												},
-                                       'Perimeter_top_ZN_4' => { 'sensor_1_frac' => 0.43,
-                                                                 'sensor_2_frac' => 0.12,
-                                                                 'sensor_1_xyz' => [1.524, 16.6369, 8.687],
-                                                                 'sensor_2_xyz' => [1.524, 30.2514, 8.687],
-																												},
-                                      },
-                      '90.1-2013' => { 'Perimeter_bot_ZN_1' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [24.9555, 1.524, 0.762],
-                                                                 'sensor_2_xyz' => [24.9555, 3.048, 0.762],
-																												},
-                                       'Perimeter_bot_ZN_2' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [48.387, 16.6369, 0.762],
-                                                                 'sensor_2_xyz' => [46.863, 16.6369, 0.762],
-																												},
-                                       'Perimeter_bot_ZN_3' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [24.9555, 31.7498, 0.762],
-                                                                 'sensor_2_xyz' => [24.9555, 30.2258, 0.762],
-																												},
-                                       'Perimeter_bot_ZN_4' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [1.524, 16.6369, 0.762],
-                                                                 'sensor_2_xyz' => [3.048, 16.6369, 0.762],
-																												},
-                                       'Perimeter_mid_ZN_1' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [24.9555, 1.524, 4.7244],
-                                                                 'sensor_2_xyz' => [24.9555, 3.048, 4.7244],
-																												},
-                                       'Perimeter_mid_ZN_2' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [48.387, 16.6369, 4.7244],
-                                                                 'sensor_2_xyz' => [46.863, 16.6369, 4.7244],
-																												},
-                                       'Perimeter_mid_ZN_3' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [24.9555, 31.7498, 4.7244],
-                                                                 'sensor_2_xyz' => [24.9555, 30.2258, 4.7244],
-																												},
-                                       'Perimeter_mid_ZN_4' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [1.524, 16.6369, 4.7244],
-                                                                 'sensor_2_xyz' => [3.048, 16.6369, 4.7244],
-																												},
-                                       'Perimeter_top_ZN_1' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [24.9555, 1.524, 8.687],
-                                                                 'sensor_2_xyz' => [24.9555, 3.048, 8.687],
-																												},
-                                       'Perimeter_top_ZN_2' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [48.387, 16.6369, 8.687],
-                                                                 'sensor_2_xyz' => [46.863, 16.6369, 8.687],
-																												},
-                                       'Perimeter_top_ZN_3' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [24.9555, 31.7498, 8.687],
-                                                                 'sensor_2_xyz' => [24.9555, 30.2258, 8.687],
-																												},
-                                       'Perimeter_top_ZN_4' => { 'sensor_1_frac' => 0.3835,
-                                                                 'sensor_2_frac' => 0.1395,
-                                                                 'sensor_1_xyz' => [1.524, 16.6369, 8.687],
-                                                                 'sensor_2_xyz' => [3.048, 16.6369, 8.687],
-																												},
-                                      },
-										}
-                  ]
+      { '90.1-2010' => { 'Perimeter_bot_ZN_1' => { 'sensor_1_frac' => 0.08,
+                                                   'sensor_2_frac' => 0.46,
+                                                   'sensor_1_xyz' => [3.048, 1.524, 0.762],
+                                                   'sensor_2_xyz' => [24.9555, 1.524, 0.762] },
+                         'Perimeter_bot_ZN_2' => { 'sensor_1_frac' => 0.43,
+                                                   'sensor_2_frac' => 0.12,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [48.387, 3.048, 0.762] },
+                         'Perimeter_bot_ZN_3' => { 'sensor_1_frac' => 0.46,
+                                                   'sensor_2_frac' => 0.08,
+                                                   'sensor_1_xyz' => [24.9514, 31.7498, 0.762],
+                                                   'sensor_2_xyz' => [46.863, 31.7498, 0.762] },
+                         'Perimeter_bot_ZN_4' => { 'sensor_1_frac' => 0.43,
+                                                   'sensor_2_frac' => 0.12,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [1.524, 30.2514, 0.762] },
+                         'Perimeter_mid_ZN_1' => { 'sensor_1_frac' => 0.08,
+                                                   'sensor_2_frac' => 0.46,
+                                                   'sensor_1_xyz' => [3.048, 1.524, 4.7244],
+                                                   'sensor_2_xyz' => [24.9555, 1.524, 4.7244] },
+                         'Perimeter_mid_ZN_2' => { 'sensor_1_frac' => 0.43,
+                                                   'sensor_2_frac' => 0.12,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [48.387, 3.048, 4.7244] },
+                         'Perimeter_mid_ZN_3' => { 'sensor_1_frac' => 0.46,
+                                                   'sensor_2_frac' => 0.08,
+                                                   'sensor_1_xyz' => [24.9514, 31.7498, 4.7244],
+                                                   'sensor_2_xyz' => [46.863, 31.7498, 4.7244] },
+                         'Perimeter_mid_ZN_4' => { 'sensor_1_frac' => 0.43,
+                                                   'sensor_2_frac' => 0.12,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [1.524, 30.2514, 4.7244] },
+                         'Perimeter_top_ZN_1' => { 'sensor_1_frac' => 0.08,
+                                                   'sensor_2_frac' => 0.46,
+                                                   'sensor_1_xyz' => [3.048, 1.524, 8.687],
+                                                   'sensor_2_xyz' => [24.9555, 1.524, 8.687] },
+                         'Perimeter_top_ZN_2' => { 'sensor_1_frac' => 0.43,
+                                                   'sensor_2_frac' => 0.12,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [48.387, 3.048, 8.687] },
+                         'Perimeter_top_ZN_3' => { 'sensor_1_frac' => 0.46,
+                                                   'sensor_2_frac' => 0.08,
+                                                   'sensor_1_xyz' => [24.9514, 31.7498, 8.687],
+                                                   'sensor_2_xyz' => [46.863, 31.7498, 8.687] },
+                         'Perimeter_top_ZN_4' => { 'sensor_1_frac' => 0.43,
+                                                   'sensor_2_frac' => 0.12,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [1.524, 30.2514, 8.687] } },
+        '90.1-2013' => { 'Perimeter_bot_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 0.762],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 0.762] },
+                         'Perimeter_bot_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 0.762] },
+                         'Perimeter_bot_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 0.762],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 0.762] },
+                         'Perimeter_bot_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 0.762] },
+                         'Perimeter_mid_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 4.7244],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 4.7244] },
+                         'Perimeter_mid_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 4.7244] },
+                         'Perimeter_mid_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 4.7244],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 4.7244] },
+                         'Perimeter_mid_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 4.7244] },
+                         'Perimeter_top_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 8.687],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 8.687] },
+                         'Perimeter_top_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 8.687] },
+                         'Perimeter_top_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 8.687],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 8.687] },
+                         'Perimeter_top_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 8.687] } },
+        '90.1-2016' => { 'Perimeter_bot_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 0.762],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 0.762] },
+                         'Perimeter_bot_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 0.762] },
+                         'Perimeter_bot_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 0.762],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 0.762] },
+                         'Perimeter_bot_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 0.762] },
+                         'Perimeter_mid_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 4.7244],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 4.7244] },
+                         'Perimeter_mid_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 4.7244] },
+                         'Perimeter_mid_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 4.7244],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 4.7244] },
+                         'Perimeter_mid_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 4.7244] },
+                         'Perimeter_top_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 8.687],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 8.687] },
+                         'Perimeter_top_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 8.687] },
+                         'Perimeter_top_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 8.687],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 8.687] },
+                         'Perimeter_top_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 8.687] } },
+        '90.1-2019' => { 'Perimeter_bot_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 0.762],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 0.762] },
+                         'Perimeter_bot_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 0.762] },
+                         'Perimeter_bot_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 0.762],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 0.762] },
+                         'Perimeter_bot_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 0.762],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 0.762] },
+                         'Perimeter_mid_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 4.7244],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 4.7244] },
+                         'Perimeter_mid_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 4.7244] },
+                         'Perimeter_mid_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 4.7244],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 4.7244] },
+                         'Perimeter_mid_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 4.7244],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 4.7244] },
+                         'Perimeter_top_ZN_1' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 1.524, 8.687],
+                                                   'sensor_2_xyz' => [24.9555, 3.048, 8.687] },
+                         'Perimeter_top_ZN_2' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [48.387, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [46.863, 16.6369, 8.687] },
+                         'Perimeter_top_ZN_3' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [24.9555, 31.7498, 8.687],
+                                                   'sensor_2_xyz' => [24.9555, 30.2258, 8.687] },
+                         'Perimeter_top_ZN_4' => { 'sensor_1_frac' => 0.3835,
+                                                   'sensor_2_frac' => 0.1395,
+                                                   'sensor_1_xyz' => [1.524, 16.6369, 8.687],
+                                                   'sensor_2_xyz' => [3.048, 16.6369, 8.687] } } }
+    ]
 
     # Adjust daylight sensors in each space
     model.getSpaces.each do |space|
-      if adjustments[0].keys.include? (template)
-        if adjustments[0][template].keys.include? (space.name.to_s)
+      if adjustments[0].keys.include? template
+        if adjustments[0][template].keys.include? space.name.to_s
           adj = adjustments[0][template][space.name.to_s]
           next if space.thermalZone.empty?
+
           zone = space.thermalZone.get
           next if space.spaceType.empty?
+
           spc_type = space.spaceType.get
           next if spc_type.standardsSpaceType.empty?
+
           stds_spc_type = spc_type.standardsSpaceType.get
           # Adjust the primary sensor
           if adj['sensor_1_frac'] && zone.primaryDaylightingControl.is_initialized
@@ -295,21 +382,30 @@ module MediumOffice
   end
 
   def model_custom_swh_tweaks(model, building_type, climate_zone, prototype_input)
-
     return true
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
 
     return true
   end
 
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = template == '90.1-2010' || template == '90.1-2013' ? 0.2 : 0.3
+    min_damper_position = template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019' ? 0.2 : 0.3
 
     # Set the minimum flow fraction
     air_terminal_single_duct_vav_reheat.setConstantMinimumAirFlowFraction(min_damper_position)
 
     return true
   end
+
+  # Type of SAT reset for this building type
+  #
+  # @param air_loop_hvac [OpenStudio::model::AirLoopHVAC] Airloop
+  # @return [String] Returns type of SAT reset
+  def air_loop_hvac_supply_air_temperature_reset_type(air_loop_hvac)
+    return 'oa'
+  end
 end